Standard Metal Blanks - embreeindustries.comembreeindustries.com/wp-content/uploads/2013/06/tagsandnameplate… · MARKING METHOD Text: Order blank or stamped (recessed lettering)

T E L : 9 0 5 - 5 2 9 - 7 1 8 7 F A X 9 0 5 - 5 2 8 - 6 7 4 7 1 - 8 0 0 - 2 6 7 - 5 7 9 1 s a l e s @ e m b r e e i n d u s t r i e s . c o m

Page 2

Standard Metal Blanks Tags are available blank, stamped, embossed, engraved and pad printed. Customized text is available, but

by quote only.

Uses:

Valve Tags

Property Tags

Check Tags

Water/Gas Tags

Cremation Tags

Material With Standard Thickness:

Copper .020

Brass .032

Stainless .024 and .047

Fibre (colours: red, black and grey) .0625

Aluminum (colours: red, blue, green, yellow, black, clear) .032

Standard Round Blanks PART NUMBER SIZE (DIA. INCHES) HOLES HOLE SIZE

A-900 13/16 None N/A

M-712 7/8 1 1/8

A-1000 1 1 3/16

A-1001 1-1/4 1 1/4 , 3/16

M-711 1-1/4 1 3/16

A-1002 1-3/8 1 3/16

A-1003 1-1/2 1 3/16 , 3/8

C-1006 2 1 1/8 OR 1/4

MX-310 2-1/2 1 1/4

D-1005 2-11/16 1 3/8 , 3/16

E-1007 3-3/16 None N/A

Standard Oval Blanks PART NUMBER SIZE (INCHES) HOLES HOLE SIZE

M-759 3/8 X 1-1/2 2 1/8

A-1010 5/8 X 1-1/2 2 1/8

M-763 13/16 X 1 1 1/8

A-1011 15/16 X 2-1/4 2 1/8

A-1014 1-1/16 X 1-3/8 2 3/16

A-1013 1-3/16 X 1-3/4 2 1/8 , 1/16

B-1015 1-3/8 X 2-1/8 2 1/8

C-1016 1-5/8 X 2-1/8 2 1/16

M-214 1-3/4 X 2-3/4 2 1/16

Standard Metal Blanks

Standard

Hole

Locations

Standard

Hole

Locations


Page 3

Standard Metal Blanks (continued)

Standard Rectangle Blanks

PART NO. SIZE (INCHES) HOLES HOLE SIZE

M-522 7/8 X 2 2 1/8

A-1022 1 X 2 2 1/8, 1/4, 3/16

B-1024 1 X 2-1/2 1 1/4

B-1026 1 X 3 2 3/16

B-1033 1-1/16 X 2-9/16 2 1/8

2

B-1034 1-1/2 X 2 1 1/8

C-1027 1-1/2 X 2-1/2 2 1/4

C-1036 1-1/2 X 3 1 1/4

D-1029 1-3/4 X 3-1/2 1 5/16

E-1038 1-3/4 X 5 4 3/16, 1/4

M-660 2 X 2 1 3/8

M-840 2 X 2-3/4 1 3/8

D-1037 2 X 3 1 5/16

SP-1045 2 X *** 4 3/16

E-1039 2-1/4 X 3-1/2 2 3/16

E-1040 2-1/4 X 5 2 3/16

E-1028 2-1/2 X 4-1/2 1 1/4

SP-1041 2-1/2 X *** 1 3/16


Standard Hole

Locations

Tags indicated with asterisk (***) are flexible as to

length. Length’s over 3” can also be made to

accommodate individual requirements.


Page 4

Standard Metal Blanks (continued)

Standard Oblong Blanks PART NUMBER SIZE (INCHES) HOLES HOLE SIZE

A-1029 3/8 X 11/16 None N/A

A-1032 3/8 X 2-3/8 2 1/8

A-1031 1/2 X 2-1/4 2 1/8

A-1021 5/8 X 1-3/8 1 1/4

A-1030 5/8 X 1-3/4 1 5/16

Miscellaneous Blanks PART NUMBER SIZE (INCHES) HOLES HOLE SIZE

A-1012 7/8 X 1-7/8 1 1/4

B-1063 1-3/8 X 1-7/8 None N/A

A-1064 1-3/8 X 1-3/8 1 1/8

C-1070 1-1/2 X 2-7/8 1 3/16

A-1065 1-3/8 X 1-3/8 1 1/8

Note: Tags supplied with indented characters can be supplied with

or without paintfill.

Custom lettering with fixed or sequential numbers, logos and other

customization available by quote. Please ask!


Standard Hole

Locations


Page 5

Pet tags are made from metals thicker than .020. The heavier guage allows for stamping into the metal with

steel type. These custom shapes are commonly used for licencing.

Uses:

Municipal Cat & Dog Licences/Rabies Tags

Materials:

Aluminum - .050 available in red, blue, green, orange and natural finish

Brass - .032

Stainless steel - .032

Sizes:

Standard shapes are pictured below – custom shapes are available on request.

The shapes above are commonly used by vaccine companies for rabies identification. Municipalities ordering

tags for licencing are urged to choose one of the shapes as shown below.

MARKING METHOD

Text: Order blank or stamped (recessed lettering). Character sizes are 1/16, 3/32 or 1/8” high. Consecutive

numbers, up to 6 digits are available 3/32 or 1/8” high. Logos, special graphics, custom shapes and

imprinting on front and back by quotation only.

Packaging & Attachments:

Standard packaging: 100 tags strung onto a wire with your choice of “O” ring or “S” hook

Strip packaging: One tag and your choice of “O” ring or “S” hook sealed in a plastic bag. Bags are in a continuous strip of up to 500/box, perforated for easy separation.

Pet Licence & Rabies Tags

706 710 708 649

707 709 373 705


Page 6

For attachments see page 14 for appropriate Fastening Device

Identification/Crematory Tags

Cremation Identification Tags are designed for use in crematoriums. Made from 18 gauge, 304 stainless

steel they easily withstand the cremation process. These tags are used and designed to identify and track

remains; thus providing a unique permanent means of identification.

Sizes:

Part Number A1001-S, 1-1/4” dia c\w one 3/16” hole

Part Number A1003-S, 1-1/2” dia c\w one 3/16” hole

Note: Our A1003-S, allows for a larger numbering sequence for facilities that might require same. Other shapes, if so desired can be chosen from our list of standard metal blanks.

Specifications:

Wording : Up to 3 lines (16 spaces each MAX)

Numbering: 1 line of up to 6 sequential numbers

Quantity: 250 minimum

LOGOS, SPECIAL TEXT AVAILABLE ON CREMATION TAGS BY QUOTE

Processing Blades

Available for your processing pots, are heavy duty stainless steel blades for the easy reduction of your cremated remains.

Cremation Tags

A1001 A1003


Page 7

Embossed Tags are made from metals .008 to .020 thickness. The thin material is ideal for embossing

permanent raised letters. Embossed characters remain legible, even when painted over or soiled. These

tags will withstand abrasion, moist environments. Good for indoor and outdoor use. Rounded corners allow

for safe handling.

Uses:

Identify parts or equipment

Identify bundles, reels and coils

Asset/serial number tags

Materials:

.008 aluminum

.008 electro-galvanized steel

.008 enamel coated steel (available in 3” widths in these colours: red, orange, yellow, green, blue and white)

Other materials available by request

Sizes:

Widths: 2”, 2-3/16”, 2-1/2” or 3”

Lengths: 2” to 7”

Holes/Slots: 1 or 2 end holes or strapping slots

Sizes of round holes: 1/8”, 3/16”, 1/4”, 5/16”, 3/8” Sizes of slotted holes: 1/4” x 13/16”, 1/4” x 1-3/8”

Text:

Tags can be ordered blank, embossed or debossed. Text is created by pressing metal tags between a mated

male / female die. This displaces the metal to create raised (embossed) or recessed (debossed) letters.

Consecutive embossed numbers up to 7 digits available – character sizes 3/16”, 1/4” or 3/8”

LOGOS or SPECIAL TEXT AVAILABLE BY QUOTATION


Light Gauge Embossed Tags


Page 8

Nick and Notch tags allow the end user to efficiently batch-print tags as needed. They are supplied in a coil

format, for use in both manual-feed and auto-feed machines. Scored (nicked) tags can be separated into

individual tags and the rounded corners (notch) allows for safe handling.

Uses:

Identify raw materials

Record and track work in progress

Identify finished goods

Materials:

.008 aluminum


.008 enamel coated steel (only available in 3” widths in these colours: red, orange, yellow, green, blue and white)

Other materials available by request.

Sizes:

Widths: 2”, 2-3/16”, 2-1/2” or 3”

Lengths: 2” to 5-3/4” in 1/2” increments

Holes/Slots: 1 or 2 end holes or strapping slots Sizes of round holes: 1/8”, 3/16”, 1/4”, 5/16”, 3/8” Sizes of slotted holes: 1/4” x 13/16”, 1/4” x 1-3/8”

Text: If fixed wording is known at time of order, specify embossed (raised) letters and or consecutive numbering

sequence. Consecutive numbers up to 6 digits, 3\8” high are available.

LOGOS or SPECIAL TEXT AVAILABLE BY QUOTATION


Nick & Notch Tags


Page 9

Printed tags are available in two different styles. First is a tag with an electro-galvanized core, covered with

white paper which provides a durable tag that will not tear or wrinkle, the second is a bare metal tag available

in various colours most suitable for colour coding. These type of tags typically have information printed in a

form-style layout. Variable information can be hand written onto the tag with a marker, a hand stamp or

mechanically marked by embossing.

Uses:

Identify raw materials

Record and track work in progress

Identify bundles, reels and coils

Warning, Shipping and Instruction Tag

Materials:


.008 enamel coated steel (only available in 3” widths in these colours: red, orange, yellow, green, blue and white)

Other materials available by request.

Sizes:

Widths: 2”, 2-3/16”, 2-1/2” or 3”

Lengths: 2” to 5-3/4”

Holes: 1 or 2 end holes or strapping slots

Sizes of round holes: 1/8”, 3/16”, 1/4”, 5/16”, 3/8”

Sizes of slotted holes: 1/4” x 13/16”, 1/4” x 1-3/8”

Attachments: 1 or 2 Brass eyelets 1/8” dia

Tying wires .015 x 15” long (supplied unattached)

Text: Tags can be ordered blank or printed. Obtainable with one or two colours printed on front or back. The paper

and bare metal surfaces accepts ink readily which allows for clear legible characters as small as 1/16”. The

printing colours available are: red, orange, yellow, green, blue, brown or black. Embossed sequential

numbering available on bare metal only.

LOGOS, ADDITIONAL COLOURS or SPECIAL TEXT AVAILABLE BY QUOTATION


Printed Metal Tags

Tags are also available blank

with or without brass eyelets.


Page 10

Utilities and communication companies use pole tags to visibly mark utility poles. These tags are provided in

aluminum which resists weathering and makes the embossed letters highly legible. The one piece

construction will not separate or crack in extreme temperatures.

Uses:

Identify light standard and utility poles

Equipment and Machinery

Materials:

.020 aluminum

.020 brass

Sizes:

PT1- 5-3/16” x 3-1/8” (oval shaped)

M519- 3” x 10” (this is an adjustable tag – from a minimum width of 3/4” to 1-1/2” and a minimum length of 3” to 10”)

).

Holes:

PT1 – 2 holes 1/8” diameter on 4-7/16” centers

M519 – 2 holes 1/8” on each end

Text:

Embossed (raised) letters and /or numbers are sized to fit. Text and embossed borders are painted black

leaving plate with its natural background. This method offered only on PT1 and PT2. Other colours available

are blue, red or green.

LOGOS, ADDITIONAL COLOUR or SPECIALTEXT AVAILABLE BY QUOTATION.

Embossed Pole Tags

PT1 HALF SIZE

M519 ADJUSTABLE LENGTH

M519

ADJUSTABLE

HEIGHT


Page 11

Municipalities that licence motorized vehicles use customized licence plates. Typical information on the

plates includes name of municipality, type of licence, year for which licence is valid and sequential numbers.

Novelty licence plates are also available for groups and organizations by quotation. For stationary plates

validation stickers are offered for the current year.

Uses: Municipal Licence Plates identifying vehicles may read:

Taxi, Tow Truck, Limousine, Refreshment Vehicle, Vendor, Driving School, Commercial, Accessible Taxicab, Dock

Materials:

.024 aluminum – White baked enamel background

Sizes:

LP1- 5-3/8” x 3-3/4”

LP2 - 8-1/4” x 5”

Holes:

LP1 – 2 slots (3/4” x 3/16”) with a 3/16” center top hole or 4 corner holes 1/8” or 1/4”

LP2 – 4 corner holes (1/8” or ¼”) or slots (1/2” x 1/4”) Specify one of these standards at time of order

Text:

The size of embossed (raised) letters is determined by the length of the wording. However, for average text

the letters are approx 3/8”- 5/8” high; the text for the year 1/2”. Sequential numbers are 7/8” on style LP1 and

1-7\8” on style LP2. Colour options for border and wording are: Red Blue, Black or Green

LOGOS, ADDITIONAL COLOURS or SPECIAL TEXT AVAILABLE BY QUOTATION.

Licence Plates

LP2 NOT TO SCALE LP1

NOT TO SCALE


Page 12

Banding Tags are metal straps for tying, bundling and fastening products difficult to package.

Uses: Mark cables and valves

Tie together hard-to-organize products for manufacture or inventory

Identify product

Materials:

Aluminum .020 - .032

Brass .015

Styles & Sizes:

BT2 - 5/8” x 5”

BT3 - 1/2” x 6”

BT5 - 7/16” x 6-1/2”

BT6 - 1” x 10”

T1066 - 1/2” x 2- 5\8” ***

T1067 - 1/2” x 5”

***Any length can be supplied over 2-5/8”

Holes:

Slots for wrapping and securing the tag in place are as pictured (not to scale).

Text:

Banding Tags are available blank, embossed, stamped or sequentially numbered

LOGO or SPECIAL TEXT AVAILABLE BY QUOTATION.

Banding Tags


Page 13

Custom metal nameplates provide permanent visible identification of products. Available with or without

mounting holes or pressure-sensitive adhesive backing.

Anodized Aluminum Nameplates The aluminum is chemically treated which allows the colour and design to be permanently captured and

sealed beneath the anodic layer of the plate. This process is available for aluminum only. This plate

weather resistant, resists solvents, gasoline, will not peel, chip, flake off or crack regardless of age; making it

ideal for indoor/outdoor applications.

Material: Aluminum – Available in a wide variety of colour choices. Just Ask!!

Etched & Filled Nameplates Surface is chemically etched – colour design is then embedded into plate. The plate is then chemical filled

and baked which provides greater visibility in dirty environments. Resists weather, solvents, corrosion, will not

crack peel or chip regardless of age. Ideal for indoor / outdoor applications.

Material(s):

stainless steel

brass

aluminum

copper

This process allows for a variety of colour choices or colour matching. Just Ask!

How to Order:

Size of plates

Material thickness

Round or square corners

Number of colours

Holes or adhesive

Quantity required

Artwork (provided or our design)

Custom Nameplates


Page 14

Fastening Devices are used to attach tags to valves, pump, pipes and other items where a tag cannot be

affixed directly.

Tagging Wire (stainless steel) Available in 1 and 5lb spools or cut to length. Single strand is 24 ga, triple strand 27ga. Other gauges and

materials are available on request.

Lead Seals With or Without Wire Lead seals are available in different sizes with or without wire attached; this makes it convenient for the

creation of custom lengths. Lead seal sizes range from 5/16” – 1/2” dia. Lead seals c\w wire are available in

standard length 6 – 12” long (other lengths on request)

Lead Seal Press Lead seal press crimps wire and disc securely. The discs are supplied blank, but if embossing is required, up

to 4 characters (including space) can be engraved to identify your product code or your company.

“O” Rings, Split Key Rings, “S” Hooks, Jack Links, These attachments are available in a wide range of sizes. Please ask!!

Spring Sleeve Check Rings For preventing loss of tags

Ball Chain/Connectors Ball chain c/w connectors are available in standard lengths 4 – 6” long, in nickel plated steel, brass plated

steel and stainless steel. Ball Chains and connectors are also offered separately for custom made length.

Security Seals/Car Seals The Security /Car seal is an 8-1\2” long metal tin plated strap. The ball housing uses a crimp lock which

makes it impossible to remove without evidence of tampering. Security seals are supplied with 8

consecutive numbers and also if required up to 20 letters. Other variation of security seals available –

Please Ask!

Metal Packing Slip Holders Our exclusive metal shipping envelopes are designed to protect vital documents from environmental and

transportation damage. Made from .015 coated steel, they are rugged and rust proof.

Fastening Devices & Accessories

Documents

Standard Metal Blanks - embreeindustries.comembreeindustries.com/wp-content/uploads/2013/06/tagsandnameplate… · MARKING METHOD Text: Order blank or stamped (recessed lettering)