SRICI Testing Center Application Guidelines

To applicants:

Ⅰ. <Certification for the Safe Transport of Chemical Goods > & < Certification for Da

ngerous Properties of Chemical Goods> sample sending notes:

1.Sample amount needed: solid 30~50g; liquid 50~70ml. The client will be informed if additional

test is needed (for example: 1kg for self-heating test, 200g for oxidizing properties test, 3.5L sample for

metal corrosion test). The name of the goods and Application Company should be indicated on the

packaging of the sample. For check requirements, our center will reserve all samples. (If valuable or

special samples need to be returned, please note in the remarks column.)

2. Our testing center will not accept the application until the application company guarantees that

the sample is the same as the transport goods. The clients should bear the related charge, law

responsibilities and other consequences for any non-conformity.

Ⅱ . <Certification for the Safe Transport of Chemical Goods > & < Certification for

Dangerous Properties of Chemical Goods> Application form notes:

1. The exact substance of the goods should be filled in ,instead of single code, type or sp

ecification code，and etc.

2. For battery products (or containing batteries), the name of the goods should be filled in with its

type (for example: Zinc-Manganese battery, Nickel-hydrogen battery, Nickel-Cadmium battery, Lead-acid

battery, lithium battery and etc.) and the model of the batteries.

3. For organic pigment（except propylene pigment for painting use）, applicants should provide the

commodity name of the dye. For organic dye, applicants should provide the commodity name and its

intensity.

4. Please provide the actual manufactory and the application agency of the goods. The certification

can not be modified after issued.

5. If possible, please provide the Material Safety Data Sheet (MSDS) of the sample.

6. The clients should bear the collection delay, certification error and extra charge due to t

he information none or wrongly provided.

7. For “Certification for the Safe Transport of Chemical Goods”， "Transport Mode" in the

application form shall be filled in. For none selection, the default selection will be by air and not allowed to

change. The clients shall bear the collection delay or certification error and extra charge due to this

reason.

Ⅲ. charge and time needed:

1. Normal application flow:

The collection time will be individually informed if the sample needs extra test through initial

determination.

Notes: If the client need our center to take a picture of the battery and dealing with the image, extra

￥100 is needed.

2.To guarantee the appraisal of the related technical data, for those uncertain data or doubtful data（for example, Rat/Mouse oral toxicity data LD50、self-heating substance, and etc..）， our center has

rights to carry out other tests （extra tests），and the applicants shall bear the related testing charge,

Details on our website.

3. Due to the different criterion of the transport mode, each certificate will only display one transport

mode. If the same sample for multi-transport modes, the charge is: ￥500 for 1 transport mode（urgent

charge not included），￥800 for 2 transport modes（urgent charge not included），￥1000 for 3 transport

modes（urgent charge not included），￥1200 for 4 transport modes（urgent charge not included）.

Collection after 24hours needs ￥100 urgent charge. Collection within 24hours needs￥200 urgent

charge.

Ⅳ. <Certification for the Safe Transport of Chemical Goods > & < Certification for Da

ngerous Properties of Chemical Goods> Valid date and reissue.

1. The certification is valid within the year. Within the valid date, the original certifications of origin

date can be reissued by the copy of the original certification with the seal of the application agency, or by

collection proxy of the application company (including certification No. & collector & the seal of the

application company. ￥100 for each certification. For those reissued certifications, the applicant should

guarantee that the transport goods is the same as the origin sample.

2. Mailing the certification: The client shall mark “mailing the certification” in the application remarks,

if the client cannot go to our center to take the certification. (Reissuing certification does not provide

mailing business). ￥20 for each mailing. The mailing will be 3 work days after the receipt of the mailing

application due to the large amount of the mails. Our company cannot afford the loss due to the delay or

losing of the mailing because we cannot control the mailing procedure of the express company. We

suggest that the clients collect the certification by themselves or ask the express company collect the

certification in our center with the collection proxy.

Ⅴ.Other cautions:

1. Due to the annual renew of the regulations of the dangerous goods transport，the

conclusion may be different every year.

2. To prevent the miss or wrong collection of the certifications, the collector shall provide the

application receipt of our center or collection proxy of the application company (including certification No.

or name of the goods, collector and other necessary information with the seal of the application company)

to take the certification（Details on our website）.

3. If for the lithium battery，besides the items above，please pay attention to the bulletin of lithium

battery testing information on the website.

4. If for the magnetized material testing，please read the magnetized material testing applic

ation cautions and charge carefully.

5. If the applicants cancelled the application during the test, ￥300 testing charge should be paid.

6. The client should send the right sample to our center and pay￥300 testing charge, if the

applicants send the wrong sample or fake sample.

7. For battery products (or products containing battery), electronic file images of samples are

needed, specific requirements are as follows:

A. Size requirements: W: L (4:3 or 3:4) clear JPG documents (no more than 8 pictures)

B. The client shall provide the front and rear view photo of the battery (if not clear enough, the

enlarged local figure photo must be provided). The front and rear view photo of the equipment is also

needed if it is with the battery.

Special conditions:

1. Both front and rear view photos of the batteries are required if the equipment containing two

batteries.

2. The client shall provide the logo or literal content with the picture if it is required to be on the

picture in the certification.

We suggest merge these pictures into one (3:4 or 4:3) JPG document.

If the provided photographs are not clear, then the commission can not be accepted

Online application is proposed, e-file pictures would be uploaded as attachments during online

application. See details on our website.

VI Work time, contact, address and bank account

1. Work time: Monday – Friday (8:30 – 16:30)

2. Contact method:

Contact person: Ms. Sun Dan and Ms. Zhao Jian Address: Reception Hall, Testing Center, West entrance, 345 East Yunling Road, Shanghai Postcode: 200062

Traffic: Bus No.551, Get off at SRICI station;

Tel：021-52802587/52815377-0713/0714/0717/0718 Fax：021-52815377-0716/0745

Website: www.msds.gov.cn

Email: msds123@gmail.com

3. Bank remittance：

RMB Account: Name: 上海天科化工检测有限公司 Bank: 中国建设银行上海怒江路支行 Account No.: 31001547840050002326

1 . O u r C e n t e r o f f e r s M a g n e t i z e d T e s t i n g b u s i n e s s , p l e a s e c o n t a c t

0 2 1 - 5 2 8 1 5 3 7 7 - 1 7 4 2

2 . O u r c e n t e r s o f f e r s P r o d u c t S a f e t y D a t a S h e e t ( M S D S ) d o c u m e n t a t i o n b u s i n e s s

M S D S i s t h e p a s s e s i n t h e c h e m i c a l e x p o r t s a n d d o m e s t i c s a l e s

M S D S i s a m u s t i n i n t e r n a t i o n a l c o r p o r a t e s e c u r i t y , o c c u p a t i o n a l h e a l t h ,

e n v i r o n m e n t a l s c i e n c e a n d m a n a g e m e n t r e q u i r e m e n t s

A p p l i e d t o e x p o r t s , c a r g o t r a n s p o r t a t i o n a n d t h e s t a t e r e g i s t r a t i o n o f t h e

m a n a g e m e n t o f d a n g e r o u s g o o d s

F o r m o r e i n f o r m a t i o n , w e l c o m e t o c o n t a c t : 0 2 1 - 5 2 8 1 5 3 7 7 - 1 7 1 2 1 7 1 0 1 7 2 5

Application form for appraisal

<Certification for Safe Transport of Chemical Goods>&

<Certification for Dangerous Properties of Chemical Goods>

Manufacturer of the goods* Application Company*

Name of the goods (Chinese)*

Synonyms (byname) Name of the goods

(English)*

(Certification for Safe Transport of Chemical Goods)Transport Modes*：

Air□（ ）copies Sea□（ ）copies

Rail□（ ）copies Road□（ ）copiesTesting items*

<Certification for Dangerous Properties of Chemical Goods>□

（Testing whether it is classified to dangerous goods or not for State

Administration for Work Safety filing requirements）

Testing time* 2Days○ 1Day○ 6-24Hours○

（For none selection, the default testing time is 2 days）

Molecular formula and structural formula*

Main components and

contents of the goods & CAS

No.*

Minor components and

contents of the goods

Toxicity data

(oral LD50 of rat and mouse)

Main hazardous properties

of the goods

Use of the goods Total Sample

weight(kg) Sample Amount(piece) Sample appearance

magnetized material

〇box 〇tray 〇others

Contact person*：

Tel*：

Fax：

MP No.*：

E-mail☼:

Application Company(shipper)&（Seal）*

Address：

Agent Company：

Agent Company Contact person： Agent Company Tel：

Agent Company Fax： Agent Company E-mail：

Remarks：（For any special requirements，please note here）

* Items that must be filled. Molecular formula and structural formula; Main & Minor components and contents of the goods is not required for electrical products） ☼ 1 transport Mode￥500，2 transport Modes￥800，3 transport Modes￥1000，4 transport Modes￥1200（urgent

charge not included）