Upload
belialshaun
View
114
Download
2
Embed Size (px)
Citation preview
Spring PlungersPressure Pins : 0.5 - 130N, M3 - M24
M E C H A N I C A LBSMBSM-PBSM-SS
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
N
Threaded pin glued in
D
T
F1
F2T1
D1
HL S
BSM3BSM4BSM5BSM6BSM8BSM10BSM12BSM16BSM20BSM24
BSM4PBSM5PBSM6PBSM8PBSM10PBSM12PBSM16P
BSM5SSBSM6SSBSM8SSBSM10SSBSM12SS
£4.54£3.48£3.39£3.53£4.16£4.66£6.05£6.70£7.91
£12.74
£4.05£3.95£4.05£4.73£5.64£7.15£8.73
£9.98£9.95
£11.08£15.12£20.48
PartNumber D D1 L H T T1 N S
Approx.weight
g
Spring forceInitial
PressureF1 ca. N
FinalPressureF2 ca. N
PriceEach1 - 19
M3M4M5M6M8M10M12M16M20M24
M4M5M6M8M10M12M16
M5M6M8M10M12
1.01.52.42.73.54.06.07.5
10.012.0
1.52.42.73.54.06.07.5
2.42.73.54.06.0
10151820222228324052
15182022222832
1820222228
1.51.52.32.53.03.04.05.07.0
10.0
1.52.32.53.03.04.05.0
2.32.53.03.04.0
1.52.02.02.53.03.55.06.08.0
10.0
2.02.02.53.03.55.06.0
2.02.53.03.55.0
1.00.60.81.01.41.42.02.53.03.0
1.00.60.81.01.41.42.0
0.81.01.41.42.0
0.40.60.81.01.21.62.02.52.52.5
0.60.81.01.21.62.02.5
0.81.01.21.62.0
0.71.31.52.02.53.04.05.06.08.0
1.31.52.02.53.04.05.0
1.52.02.53.04.0
0.556799
10456080
56799
1045
5678
10
3162020353555
100120130
162020353555
100
1717293147
0.40.81.32.56.09.0
16.035.066.3
122.2
0.81.32.56.09.0
16.035.0
1.32.56.09.0
16.0
MaterialSteel, quality class 5.8.Pressure Pin: Steel or Plastic.Stainless Steel version in 1.4305.Surface Finish: Black oxide finish. Pressure pin in steel or stainless steel, both hardened.
Other Info.Spring plungers serve for positioning and indexing, and also as hold-down and knock-out pins. They are used, for example, in fixture and tool shops.Fitting key available. Please ask for a quote.
STEEL
PLASTIC END - STEEL BODY
STAINLESS
Discounts: 20+ -15% | 40+ -20% | 60+ -25% | 100+ -30%
Spring Plungers (Secured with Long-Lok)Pressure Pins : 6 - 100N, M5 - M16
M E C H A N I C A L BSM-/LOKBSM-P/LOKBSM-SS/LOK
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
Nthreaded pin glued in
D
T
F1
F2
T1
D1
HL
L1 L2
S
BSM5/LOKBSM6/LOKBSM8/LOKBSM10/LOKBSM12/LOKBSM16/LOK
BSM5P/LOKBSM6P/LOKBSM8P/LOKBSM10P/LOKBSM12P/LOKBSM16P/LOK
BSM5SS/LOKBSM6SS/LOKBSM8SS/LOKBSM10SS/LOKBSM12SS/LOK
£3.93£4.05£4.59£5.11
£10.10£12.82
£4.35£4.50
£10.54£6.02
£11.25£13.96
£12.96£13.18£14.82£16.86£26.82
PartNumber D D1 L L1 L2 H T T1 N S
Price Each 1 - 19
M5M6M8M10M12M16
M5M6M8M10M12M16
M5M6M8M10M12
2.42.73.54.06.07.5
2.42.73.54.06.07.5
2.42.73.54.06.0
182022222832
182022222832
1820222228
7789
1014
7789
1014
7789
10
Approx2
Coarsesof
Thread
Approx2
Coarsesof
Thread
Approx2
Coarsesof
Thread
2.32.53.03.04.05.0
2.32.53.03.04.05.0
2.32.53.03.04.0
2.02.53.03.55.06.0
2.02.53.03.55.06.0
2.02.53.03.55.0
0.81.01.41.42.02.5
0.60.81.01.41.42.0
0.81.01.41.42.0
0.81.01.21.62.02.5
0.81.01.21.62.02.5
0.81.01.21.62.0
1.52.02.53.04.05.0
1.52.02.53.04.05.0
1.52.02.53.04.0
MaterialSteel, quality class 5.8. Pressure Pin: Steel, plastic or Stainless Steel 1.4305. Long-Lok Thread: NylonSurface Finish: Black oxide finish. Stainless steel bright finish. Pressure pin in steel or stainless steel, both hardenedOther Info.Advantages: Secure in the case of vibrations; Extremely high unscrewing movement; Secure in every position; Saves assembly and stock keeping; For repeateduse; Problem solver from M3 to M16. Spring plungers serve for positioning and indexing, and also as hold-down and knock-out pins. They are used, for example,in fixture and tool shops. Fitting key available. Please ask for a quote.
STEEL
PLASTIC END - STEEL BODY
STAINLESS
±0.5
BSM5/LOKBSM6/LOKBSM8/LOKBSM10/LOKBSM12/LOKBSM16/LOK
BSM5P/LOKBSM6P/LOKBSM8P/LOKBSM10P/LOKBSM12P/LOKBSM16P/LOK
BSM5SS/LOKBSM6SS/LOKBSM8SS/LOKBSM10SS/LOKBSM12SS/LOK
PartNumber
Initial Spring ForcePressureF1 ca. N
Final Spring ForcePressureF2 ca. N
Screwing-inMoment
Min
Screwing-outMoment
Mout
Approx.Weight
g
6799
1045
6799
1045
5678
10
2020353555
100
2020353555
100
1717293147
0.100.250.400.701.004.20
0.100.250.400.701.004.20
0.100.250.400.701.00
0.250.450.600.801.204.30
0.250.450.600.801.204.30
0.250.450.600.801.20
1.32.56.09.0
16.035.0
1.32.56.09.0
16.035.0
1.32.56.09.0
16.0
STEEL
PLASTIC END - STEEL BODY
STAINLESS
Discounts: 20+ -15% | 40+ -20% | 60+ -25% | 100+ -30%
Spring PlungersBall End : 1.5 - 160N, M3 - M20
M E C H A N I C A LBPMBPM-SS
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
D
N
F1
F2
D1
HL
D D1 L H N
InitialPress
F1 ca. N
InitialPress
F2 ca. N
Appx.weight
gSteel Stainless StainlessSteel
Slide arresting feature
BPM3 BPM3SS M3 1.5 7 0.5 0.4 1.5 3 0.2 £1.90 £5.09BPM4 BPM4SS M4 2.5 9 0.8 0.6 4 10 0.6 £1.44 £4.42BPM5 BPM5SS M5 3.0 12 0.9 0.8 6 11 0.9 £1.44 £4.42BPM6 BPM6SS M6 3.5 14 1.0 1.0 9 13 1.5 £1.44 £4.42BPM8 BPM8SS M8 5.0 16 1.5 1.2 15 30 3.5 £1.93 £5.73BPM10 BPM10SS M10 6.0 19 2.0 1.6 20 35 7.0 £2.04 £6.57BPM12 BPM12SS M12 8.0 22 2.5 2.0 30 55 10.0 £3.07 £8.01BPM16 BPM16SS M16 10.0 24 3.5 2.5 65 125 24.0 £4.10 £7.89BPM20 BPM20SS M20 12.0 30 4.5 2.5 80 160 44.3 £6.70 £10.08
MaterialSteel, quality class 5.8, or Stainless Steel.
Surface Finish: Black oxide finish. Ball hardened, bright.Stainless steel, bright.
Part Number Price Each 1 - 19
Discounts: 20+ -15% | 40+ -20% | 60+ -25% | 100+ -30%
Spring Plungers (Secured with Long-Lok)Ball End : 1.5 - 125N, M3 - M16
M E C H A N I C A L BPM-/LOKBPM-SS/LOK
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
D N
F1
F2
D1
H
BPM3 - BPM6
BPM8 - BPM16
L
L1 L2
L2 L1
Slide arresting feature
MaterialSteel, quality class 5.8, or Stainless Steel.Long-Lok thread in nylonSurface Finish: Black oxide finish. Ball hardened, bright. Stainless steel, bright.
Other Info.Advantages:• Secure in the case of vibrations.• Extremely high unscrewing movement• Secure in every position• Saves assembly and stock keeping• For repeated use• Problem solver from M3 to M16
Initial SpringForce Pressure
F1 ca. N
Final SpringForce Pressure
F2 ca. N
Screwing-inMoment
Min
Screwing-outMoment
Mout
Approx.Weight
gSteel Stainless
BPM3/LOK BPM3SS/LOKBPM4/LOK BPM4SS/LOKBPM5/LOK BPM5SS/LOKBPM6/LOK BPM6SS/LOKBPM8/LOK BPM8SS/LOKBPM10/LOK BPM10SS/LOKBPM12/LOK BPM12SS/LOKBPM16/LOK BPM16SS/LOK
Part Number
1.54.06.09.0
15.020.030.065.0
3101113303555
125
0.100.100.100.250.400.701.004.20
0.250.250.250.450.600.801.204.30
0.20.60.91.53.57.0
10.024.0
D D1 L L1 L2 H N Steel StainlessSteel Stainless
BPM3/LOK BPM3SS/LOK M3 1.5 7 4 0.5 0.4 £2.07 £7.62BPM4/LOK BPM4SS/LOK M4 2.5 9 5 Approx 0.8 0.6 £2.07 £6.78BPM5/LOK BPM5SS/LOK M5 3.0 12 6 2 0.9 0.8 £2.14 £6.90BPM6/LOK BPM6SS/LOK M6 3.5 14 7 Coarses 1.0 1.0 £2.08 £6.90BPM8/LOK BPM8SS/LOK M8 5.0 16 8 of 1.5 1.2 £2.58 £8.75BPM10/LOK BPM10SS/LOK M10 6.0 19 9 Thread 2.0 1.6 £2.73 £9.91BPM12/LOK BPM12SS/LOK M12 8.0 22 10 2.5 2.0 £7.31 £17.22BPM16/LOK BPM16SS/LOK M16 10.0 24 14 3.5 2.5 £9.47 £21.45
Part Number Price Each 1 - 19±0.5
Discounts: 20+ -15% | 40+ -20% | 60+ -25% | 100+ -30%
Plain Spring PlungersSmooth Execution Ball End : 4 - 8mm Dia.
M E C H A N I C A LBSDBSD-SS
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialBody: BSD: Pom (Delrin) BSD-SS: W.-Nr 1.4305 (303) Stainless SteelSleeve: BSD: Thermoplastic BSD-SS: Stainless SteelBall: W.-Nr 1.4034 (420) Stainless SteelSpring: W.-Nr 1.4310 (301) Stainless SteelSurface Finish: BSD: Ball hardened, bright BSD-SS: Bright
D D1 D2
F1
F2
1
L H
H
PLASTICBSD-4BSD-5BSD-6BSD-8
STAINLESSBSD-4SSBSD-5SSBSD-6SSBSD-8SS
4568
4568
3.04.05.06.5
3.04.05.06.5
4.65.66.58.5
4.65.66.58.5
5679
5679
0.71.01.51.8
0.71.01.51.8
3466
3466
77
1212
77
1212
0.170.350.661.46
0.300.601.002.00
£1.38£1.49£1.60£1.93
£2.35£2.38£2.46£3.06
PartNumber
Price Each 1 - 19D D1 D2 L H
InitialPressureF1 Ca N
FinalPressureF2 Ca N
ApproxWeight
g
+0.1
D D1 D2
F1
F2
1
L H
H+0.1
BSD Type - Plastic
BSD-SS Type - Stainless
Discounts: 20+ -15% | 40+ -20% | 60+ -25% | 100+ -30%
Threaded Spring ElementsZinc Plated Body : M12x1.5 - M20x1.5
M E C H A N I C A LGN.38
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialBody: Threaded zinc-plated, black oxide and hardened Steel Ends: With female thread (type I), pointed nose (type K), semi-spherical (type H) & prism (type P)Steel Spring: Normal end-force (bright zinc-plated) or heavy end-force (tropical yellow zinc-plated).
Other Info.These spring elements are universal pressure elements used for detenting, positioning or for clamping pieces by means of the pressure of a loaded spring.
PartNumber
GN.38221GN.38222GN.38223GN.38224GN.38226GN.38227GN.38228GN.38229GN.38231GN.38232GN.38233GN.38234
GN.38261GN.38262GN.38263GN.38264GN.38266GN.38267GN.38268GN.38269GN.38271GN.38272GN.38273GN.38274
9.09.09.09.0
12.012.012.012.014.514.514.514.5
9.09.09.09.0
12.012.012.012.014.514.514.514.5
-M4
---
M5---
M6--
-M4
---
M5---
M6--
7.67.67.67.68.88.88.88.8
11.411.411.411.4
7.67.67.67.68.88.88.88.8
11.411.411.411.4
282828283838383847474747
282828283838383847474747
191919192727272733333333
191919192727272733333333
333333334444
333333334444
66668888
10101010
66668888
10101010
-8---
10---
12--
-8---
10---
12--
4.5---
6.0---
7.2---
4.5---
6.0---
7.2---
-6---7---9--
-6---7---9--
888-
101010-
121212-
888-
101010-
121212-
---4---6---8
---4---6---8
161616162525252540404040
181818184545454565656565
3535353571717171
130130130130
56565656
125125125125210210210210
101013123030302966656564
101012123232313167676365
M12x1.5M12x1.5M12x1.5M12x1.5M16x1.5M16x1.5M16x1.5M16x1.5M20x1.5M20x1.5M20x1.5M20x1.5
M12x1.5M12x1.5M12x1.5M12x1.5M16x1.5M16x1.5M16x1.5M16x1.5M20x1.5M20x1.5M20x1.5M20x1.5
HIKPHIKPHIKP
HIKPHIKPHIKP
d1 d2 d3 L I I1 I2 I3 r s s1 s2Preload(N)
Max.load(N)
Weightg
PriceEach1 - 19
£8.53£9.40£7.69
£10.09£9.88
£10.60£9.13
£12.09£12.06£13.45£11.81£14.74
£8.53£9.40£7.69
£10.09£9.88
£10.60£9.13
£12.09£12.06£13.45£11.81£14.74
dType
L
I3
d2
I
s
d3
d1
d
I2
s1
I2 I2 I2r
d1
90°120°
d1 d1
s1 s2
s1
I1
Type I Type K Type H Type P
NORMAL END-FORCE (BRIGHT ZINC-PLATED)
HEAVY END-FORCE (TROPICAL YELLOW ZINC-PLATED)
Spring Pressure
Discounts: 20+ -5% | 40+ -10% | 60+ -15% | 100+ -20%
Threaded Ball Spring PlungersWith Limit Switch : M6 - M10
M E C H A N I C A LGN.33
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialBody: Hardened nickel-plated steel partially coated with MVK and locking patch for threads.Ball: Hardened steelSpring: Stainless steelSupply Cable: Grey two-phase for normally open contacts or black cable for normally closed contacts. Maximum Tensile Load: 20N.
Other Info.Working Temperature: -40°C to +170°C.Electrical characteristic of the switch:Electrical Supply: 20 mA DC / 50 mA DCVoltage: 24VSafety Standard: IP40Supply Cable: diameter 2.8mm, 2 phasesWorking Temperature: -10°C to +50°CAverage Switch Life-span: 5,000,000 switching.
On request and for sufficient quantities PFB blue instant locking patch for threads are available; working temperature from -50°C to +90°C.
Warning: if the screw-in thread is earthed the blue cable has to be connected to the mass.
Threaded bolt spring plungers are used for locking or releasing piece by using a built-in electrical switch.
PartNumber
GN.33801GN.33802GN.33803
GN.33811GN.33812GN.33813
M6M8
M10
M6M8
M10
345
345
2.82.82.8
2.82.82.8
202327
202327
101010
101010
0.40.50.6
0.40.50.6
0.81.01.2
0.81.01.2
5.57.08.0
5.57.08.0
68
10
68
10
131620
131620
202025
202025
d d1 d2 I I1 I2±0.1 I3
±0.1s
Preload(N)
Max.load (N)
Weightg
PriceEach1 - 19
£84.60£84.68£89.53
£84.60£84.68£89.53
Spring Pressure
sI
I
I1
R min. 7
d
d1 d2
I2
I3
Generally open
Generally closed
brown
blue
brown
blue
CLOSED CONTACT
OPEN CONTACT
Discounts: 20+ -5% | 40+ -10% | 60+ -15% | 100+ -20%
Ball Spring PlungersThreaded and Double Ended Smooth : M6 - M10, 2 - 6.5mm Dia.
M E C H A N I C A L GN.32GN.33
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialThreaded:Body: Acetal resin with screwdriver slotted head.Spring: Stainless steelBall: Hardened stainless steel or acetal resin ballWorking Temperature (Acetal ball): -30°C to +50°C
Double Ended:Body: Brass.Spring: Stainless steelBall: Hardened stainless steel.Double ended spring plungers are the result of a furtherdevelopment of threaded spring plungers for special applications.
I I1
d
II1
d2
dd1
d1
Threaded (Plastic Body)
Double Ended Smooth (Brass Body)
DOUBLE ENDED
PartNumber
GN.33301GN.33302GN.33303
GN.33321GN.33322GN.33323
GN.32305GN.32307GN.32309GN.32311GN.32313GN.32315
M6M8M10
M6M8M10
2.02.53.04.06.06.5
3.55.06.0
3.55.06.0
2.53.04.05.07.08.0
---
---
2.523.024.035.037.038.03
141619
141619
5.37.39.0
10.814.018.0
1.01.52.0
1.01.52.0
0.650.800.901.202.002.10
122020
122020
1.32.02.53.54.06.0
173545
173545
2.54.57.58.0
12.015.0
123
123
111135
d d1 d2+0.05 I I1Preload
(N)Max. Load
(N)Weight
g
PriceEach1 - 19
£1.39£1.76£2.08
£1.62£2.01£2.25
£2.98£2.98£3.07£3.07£3.53£3.81
Spring Pressure
THREADED - HARD STAINLESS BALL
THREADED - ACETAL BALL
Discounts: 20+ -5% | 40+ -10% | 60+ -15% | 100+ -20%
Threaded Ball Spring PlungersStainless Steel with Screwdriver Slotted Head : M4 - M12
M E C H A N I C A LGN.33
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
L
L2 L1
d1 d
L
L3
L
D
M4 & M5 M6 - M12
MaterialBody: AISI 303 Stainless Steel.Ball: Hardened Stainless Steel.Spring: Stainless Steel.
Other Info.The screwdriver slot on the head of the plunger is also useful to provide an indication ofthe position of the blocked element.AISI 304 Stainless Steel offers high corrosion resistance and allows use on machines andequipment in those sectors where laws or particular hygienic, climatic and environmentalfactors make it mandatory to use corrosion resistant materials.
PartNumber
GN.33911GN.33921GN.33931GN.33941GN.33951GN.33961
M40M50M60M80M10M12
2.53.03.54.56.08.0
060810131618
06.508.509.011.014.015.0
0.80.91.01.52.02.5
3.04.05.05.56.07.0
5.06.7----
080811182426
141418314549
020506101525
d d1 D L L1 L2 L3Preload
(N)Max. Load
(N)Weight
g
PriceEach1 - 19
£7.29£7.45£8.46
£11.06£12.67£14.67
Spring Pressure
Discounts: 20+ -5% | 40+ -10% | 60+ -15% | 100+ -20%
Threaded Bolt Spring PlungersLong Stroke With Thread Locking Patch : M10 - M16
M E C H A N I C A LGN.34
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialBody: Black oxide steel partially coated with PFB blue instant locking patch for threads.Plunger: Black oxide ground hardenedSpring: Steel with normal end-force or with heavy end-force (non-burnished hexagon socket)
Other Info.Working Temperature: -50°C to +90°C.
On request and for sufficient quantities, MVK red locking patch for threads are available; Working temperature from -40°C to +170°C.
Long stroke threaded spring plungers are normally used for machining metal sheet as ejectors,for push-on or push-off operations or as cushioners.
L
I I1
d d1d2
PFB Blue Instant Locking Patch
PartNumber
GN.34252GN.34254GN.34256GN.34257GN.34259
GN.34264GN.34266GN.34269
M10M12M16M16M16
M12M16M16
4.05.58.08.08.0
5.58.08.0
7.89.5
13.413.413.4
9.513.413.4
3543585898
435898
2535353535
353535
0810152030
101530
0604090413
121020
1618332347
445780
1323545583
235583
d d1 d2 L I I1Preload
(N)Max. load
(N)Weight
g
PriceEach1 - 19
£28.39£31.51£38.64£40.47£61.04
£32.48£39.52£61.81
Spring Pressure
NORMAL END FORCE
HEAVY END FORCE
Discounts: 20+ -5% | 40+ -10% | 60+ -15% | 100+ -20%
Striker BushingsBurnished Ground Hardened Steel
M E C H A N I C A LGN.34
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialBurnished ground hardened steel.
Other Info.Striker bushings are used together with ball or bolt spring plungers when a contact surface is requiredwith high wear resistance. In particular they are recommended for use with plungers with high-loadedsprings and plungers with reinforced springs.
PartNumber
GN.34201GN.34202GN.34203GN.34204GN.34205GN.34206GN.34207
04050608101216
1.52.02.03.04.06.08.0
05060810121418
M40M50M60M80M10M12M26
01010204071226
D m6 d d1 L ±0.05 I1 *Weight
g
PriceEach1 - 19
D
L
90°
I2
d + d1 √2I2 = I1 - d
2 2
I1
d
d1
d1
£8.35£8.35£8.35£8.73
£10.32£10.66£19.30
See
the
corr
esp
on
din
gp
lun
ger
See
the
corr
esp
on
din
gp
lun
ger
* Threading of the corresponding plunger
Discounts: 20+ -5% | 40+ -10% | 60+ -15% | 100+ -20%
Eccentric Bushings & Indent BlocksM E C H A N I C A L GN.37
GN.34
� [email protected]� www.ondrives.com
�+44 (0)1246 455500� +44 (0)1246 455522
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialEccentric Bushings: Burnished steel.Indent Blocks: Hardened black oxide sintered steel.
Other Info.Eccentric Bushings: eccentric bushings are used to correctly position side thrust pins. Using the eccentric bushings, the thrust pin can be positioned veryprecisely to adopt to the tolerance of the piece to be mounted.Indent Blocks: indent blocks are used together with spring plungers for detenting or positioning sliding parts, flaps or for similar applications.
D
L
90°
90°
h min.
d
f
b
b
d1
h4.6
8
I2
f1±0.05
f±0.05
15
15
GN614 / GN615 / BSD
D1
h1
Eccentric Bushings
Indent Blocks
PartNumber
GN.37011GN.37013GN.37016GN.37018
6101216
12161825
12161825
M4M4M4M6
10121418
2223
9.911.913.917.9
59
1335
d D D1 H7 f h h1 L-0.2
Weightg
PriceEach1 - 19
£30.47£31.23£39.39£41.73
ECCENTRIC BUSHINGS
PartNumber
GN.34221GN.34222
08.510.5
3.44.5
4.34.3
55
3.53.5
68
0.91.0
M80M10
0.81.0
1011
h b±0.1 d1 f f1 Dim I2 Dim I2Weight
g
PriceEach1 - 19
£4.18£4.38
INDENT BLOCKS
GN.32 GN.33
Discounts: 20+ -5% | 40+ -10% | 60+ -15% | 100+ -20%