SPOO

LER

FCS-10211-1

SPOOLERFCS-10211-1

KEY FEATURES

Suitable for use with standard drums, live center sha� and 3” swivel rated to 10k.

Frame is designed to DNV GL cer�fica�on 2.7-1.

This standard hose reel is designed fordeployment and recovery of subsea hoses.

Extensions to the frame to increase themaximum diameter and width of the reel can be supplied on request. Indica�ve of a core diameter of 2.44m at 210bar opera�ng pressure and 80lpm opera�ng flow.

The system is designed to be operated from a standalone diesel or electric hydraulic power unit.

DESCRIPTIONS

Fluid Control Service AS

Ljosheimsvegen 14050 Sola, Norway

Tel: +47 51 64 49 50Email: post@fluidcontrol.no www.fluidcontrol.no

PERFORMANCE DATA

10,000kg

15.3m/min

5,000mm

3,000mm

80l/min

Pull Force on Drum (Inner Layer)

Maximum Speed (Outer layer)

Maximum Drum Diameter

Maximum Drum Width

Hydraulic Supply

ADDITIONAL INFORMATION

Lifting Frame pockets suitable for Fork Li� / 4 points li�ing

The spooler has been modified to accommodate a split drum with live centre sha� and swivel suitable for deployment/recovery of both 4” Soluforce and 2” Black Eagle hoses.

WEIGHT & DIMENSIONS

Maximum Gross Weight

Tara Weight

Outer Dimensions (L x W x H)

9,000kg

9,000kg (Drum Transported as Separate Item)

6,500mm x 2,500mm x 3,000mm

DRIVE SYSTEM

Drive (Hydraulic)

Gearbox

Maximum Operating Pressure

320cc Hydraulic Radial Piston Motor(Torque @ 210 bar = 123KNm)

Planetary Gearbox

200bar