SPEED™ CONTINUOUS COMPRESSION IMPLANTHand and Wrist Overview

SPEED Implant 11X10

Headless Compression Screw

P

RE-D

ISPL

AC

EMEN

T

PO

ST-D

ISPL

AC

EMEN

T

• SPEED Continuous Compression Implants - an innovative Hand & Wrist specific system that may SAVE TIME in the O.R.

• Dual-purpose drilling templates designed to select bridge size and drill, all in one step.

• BME depth gauge included for determining leg length PRIOR to selecting the implant.

More Compression

*VER-136-08**Bench Test results may not necessarily be indicative of clinical performance.

CONTINUOUS ACTIVE COMPRESSION FOR THE HAND & WRISTThe versatile SPEED™ Implants are made of the shape memory metal Nitinol and are designed to provide long-term, dynamic compression to compensate for bone resorption while maintaining stability.

The SPEED Implant Hand & Wrist System, developed with the help of a team of leading hand surgeons, is designed to enhance ease of use. Most importantly, the surgeon can now determine the bridge and leg lengths needed PRIOR to opening an implant package. With easy-to-use Drilling Templates, an optional Sizing Guide, and an included Depth Gauge, the Hand & Wrist System redefines simplicity in the operating room.

Retains compression after repetitive loading

Barbed legs provide secure fixation

High strength, stiffness and rotational stability for high-load applications

Pre PrePost Post

Continuous Active Compression is based on the superelasticity of our implants that allow them to behave like powerful springs. SPEED Implants have been shown in Bench Trials** to recover from repetitive construct deformation.

INSERTION TOOL

Implants come pre-loaded and ready to use.

DEPTH GAUGE

Customized depth gauge to help ensure optimal fit.

DRILLING TEMPLATES

Function as integrated sizing tools and drill guides to simplify the technique.

PRE-STERILIZED, FULLY DISPOSABLE SYSTEM - No heating, freezing or spreading required.

Headless Compression Screws showed a significant loss of contact area post displacement.

SPEED MEMORY IMPLANT vs. LEADING HEADLESS COMPRESSION SCREWS: PRESSURE MAP PROFILE FROM BENCH STUDY (OR TRIAL)**

SIMPLE. STRONG. STABLE. EFFECTIVE.

EFFECT OF REPETITIVE MOTION ON COMPRESSION:SPEED IMPLANT VS. LEADING HEADLESS COMPRESSION SCREW (N)Pre- and Post- 100 Cycles at 1mm Displacement*

CORRESPONDING DRILL KITPART

NUMBER DRILL

BIT SIZE DRILLING

TEMPLATES*LOCATOR

PINSTAMP K-WIRES

DK-200HW 2.0mm 09,11,13,15 2 x LP-200 TP-200 0.045 in.

© DePuy Sythes 2017. All rights reserved. DSUS/TRM/0816/1002(1) 6/17

Manufactured or Distributed by:

Synthes USA Products, LLC1302 Wrights Lane EastWest Chester, PA 19380

www.depuysynthes.com

*SIZES IN MILLIMETERS

*SIZES IN MILLIMETERS

SPEED CONTINUOUS COMPRESSION IMPLANTS FOR HAND & WRIST

IMPLANT KIT BRIDGE* LEGS* WIRE SIZE*

SE-0907 09 07 1.5 x 1.5

SE-0910 09 10 1.5 x 1.5

SE-1108 11 08 1.5 x 1.5

SE-1110 11 10 1.5 x 1.5

SE-111513 11 15/13 1.5 x 1.5

SE-1308 13 08 1.5 x 1.5

SE-1310 13 10 1.5 x 1.5

SE-1312 13 12 1.5 x 1.5

SE-131513 13 15/13 1.5 x 1.5

SE-1510 15 10 1.5 x 1.5

SE-1512 15 12 1.5 x 1.5

Limited Warranty and Disclaimer: DePuy Synthes Products are sold with a limited warranty to the original purchaser against defects in workmanship and materials. Any other express or implied warranties, including warranties of merchantability or fitness, are hereby disclaimed. Please also refer to the package insert(s) or other labeling associated with the devices identified in this sales document for additional information.

CAUTION: Federal Law restricts these devices to sale by or on the order of a physician. Some devices listed in this sales aid may not have been licensed in accordance with Canadian law and may not be for sale in Canada.

Please contact your sales consultant for items approved for sale in Canada.

Not all Products may currently be available in all markets.

Third party trademarks used herein are the trademarks of their respective owners.

SPEED Implant Diagram

Constrained in the open position

Bi-cortical compressionwhen released

LegLegBridge

A

B

C

D

E

F

G

TOP TRAY BOTTOM TRAY

A 2.0mm Drill BitB TampC Depth Gauge

D Pull Pins (2)E Sizing GuideF Drilling Templates (4)

G K-wires (4)

Additional sizes available. Ask your Sales Representative for more information.

Synthes USA, LLC1101 Synthes AvenueMonument, CO 80132

To order (USA): 800-523-0322

To order (Canada): 800-946-8999

NOTE: For recognized manufacturer, refer to the product label.