2
VM-ZINC • Sacrificial cathodic protection for valves in buried service • Protective, reinforced zinc-rich primer base coat • High-performance, chemically-cured epoxy top coat • Coating system provides exceptional abrasion and corrosion resistance Epoxy Top Coat Zinc-Rich Base Coat You specified zinc coating to protect your ductile iron pipe..... Why would you leave the most critical components exposed? Specify Val-Matic’s Zinc-Rich Coating System for your buried valves. Val-Matic Valve & Mfg. Corp. • www.valmatic.com • [email protected] • 630-941-7600

Specify Val-Matic’s Zinc-Rich Coating System for your buried valves. · 2019. 2. 8. · You speci˜ ed zinc coating to protect your ductile iron pipe ... Specify Val-Matic’s Zinc-Rich

  • Upload
    others

  • View
    9

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Specify Val-Matic’s Zinc-Rich Coating System for your buried valves. · 2019. 2. 8. · You speci˜ ed zinc coating to protect your ductile iron pipe ... Specify Val-Matic’s Zinc-Rich

VM-ZINC

• Sacri� cial cathodic protection for valves in buried service

• Protective, reinforced zinc-rich primer base coat

• High-performance, chemically-cured epoxy top coat

• Coating system provides exceptional abrasion and corrosion resistance

EpoxyTop Coat

Zinc-RichBase Coat

You speci� ed zinc coating to protect your ductile iron pipe.....Why would you leave the most critical components exposed?

Specify Val-Matic’s Zinc-Rich Coating Systemfor your buried valves.

Val-Matic Valve & Mfg. Corp. • www.valmatic.com • [email protected] • 630-941-7600

Page 2: Specify Val-Matic’s Zinc-Rich Coating System for your buried valves. · 2019. 2. 8. · You speci˜ ed zinc coating to protect your ductile iron pipe ... Specify Val-Matic’s Zinc-Rich

For over 20 years, advanced cathodic protection for buried valves has been provided by the application of a base coat of a protective, two component, reinforced zinc-rich primer. Zinc has a lower electrode potential on the galvanic series and therefore acts as a sacri� cial galvanic anode to help protect iron in corrosive environments. The result is a reliable coating system with exceptional abrasion and corro-sion resistance ideally suited for buried valves, especially those in contact with zinc-coated iron pipe.

Coating System Performance Characteristics

TraditionalEpoxy Coating

Corrosion Pocket

EpoxyTop Coat Zinc-Rich

Base Coat

Protective Zinc CellIron

Corrosion without Zinc Coating Protection Corrosion with Zinc Coating Protection

Specifying cathodic protection for your

ductile iron pipe alone may leave your

most critical components, the valves,

exposed to galvanic corrosion.

By installing valves with Val-Matic’s

Zinc-Rich Coating System, you ensure

the corrosion resistance for the entire

pipeline system.

The Science of Galvanic Protection

Color Black

Thickness 12 mils minimum

Density of Zinc 200 g/m2

Gloss Level Semi-gloss

Volume Solids High, 80%

Epoxy Certi� cation Meets AWWA C-210 and D-102, ISO 8179

Safety Meets NSF/ANSI 61 for Potable Water

Surface Preparation SSPC-SP10

Adhesion 2000 PSI

Environment Low VOC Coating

Resistance Resistant to many solvents and chemicals

Application Suitable for buried service or corrosive environments