2
UltraFENCE COLD ROLLED PALISADE FENCING SYSTEM USAGE: Boundary Fencing Schools, Campus industrial Sites Electric/Gas Installations Defence Installations ADVANTAGES: Stronger & Lighter Anti-grab Tags Reduced Installation Time & Cost Conforms to BS1722 Pt12 : 2006 Using a unique cold roll forming process, we are able to offer UltraFENCE™ the first complete cold rolled Security Fencing System. Whilst exceeding the stringent requirements of BS1722 Pt12; 2006 the system is lighter, stronger and more economical than conventional pal- isade fencing systems. The system consists of three rolled components: UltraPALE UltraRAIL UltraPOST UltraFENCE COLD ROLLED PALISADE FENCING SYSTEM HEIGHT Fencing is supplied to BS1722 Part 12 : 2006 in a standard range of 1.8, 2.0, 2.1, 2.4, 3.0 and 3.6 metre heights. In addition non standard fence configurations can be manufactured for specific requirements. NB: UltraPOST is available up to and including 3 metre max. KEY 1. Fish plate to which Top and Bottom Rail are fixed using M12 anti-vandal fixings. 2. Top Rail - UltraRAIL™ to which pales are fixed using UltraBOLT or UltraRIVET. 3. Bottom Rail - UltraRAIL™ to which pales are bolted using UltraBOLT or UltraRIVET. 4. Standard UltraPOST’s™. 5. Fencing Pale: UltraPALE . 6. Concrete foundation. PALING HEADS We supply a selection of heads that can be used with our fencing systems and care should be taken to select the correct head to suit the requirement needed for your project. Whitten Metalworks, Unit 4, 39 Willow Lane, Mitcham, Surrey CR4 4NA Telephone: 020 8640 3888 Fax: 020 8640 6999 WHIT/2/08 www.securedbydesign.com FIXINGS 1.8 - 3.6m STANDARD HEIGHT 2750mm 17 pales @ 154mm centres 143mm 143mm TYPICAL CONSTRUCTION FOR UltraFENCE 3 6 5 4 1 2 M8 UltraBOLT: M8 bolt with tamper proof snap off cone nut, suitable for use with general purpose (GP) and security palisade fences (SP). M8 RIVETS: 8mm rivets with collars. M6 RIVETS: Available upon request (does not comply with BS1722 Pt12: 2006) M12 Bolt: M12 cup square bolt with cone snap off tamper proof nut, suitable for use with general purpose (GP) and security palisade fences (SP). ROUND TOP & NOTCHED ROUND TOP TRIPLE POINTED SINGLE POINT FLAT TOP Specifications www.whittenmetalworks.co.uk

Specifications UltraFENCE - Whitten Metal Works FENCE.pdfCOLD ROLLED PALISADE FENCING SYSTEM. HEIGHT Fencing is supplied to BS1722 Part 12 : 2006 in a standard range of 1.8, 2.0, 2.1,

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Specifications UltraFENCE - Whitten Metal Works FENCE.pdfCOLD ROLLED PALISADE FENCING SYSTEM. HEIGHT Fencing is supplied to BS1722 Part 12 : 2006 in a standard range of 1.8, 2.0, 2.1,

UltraFENCECOLD ROLLEDPALISADEFENCING SYSTEMUSAGE:

n Boundary Fencing

n Schools, Campusindustrial Sites

n Electric/Gas Installations

n Defence Installations

ADVANTAGES:

n Stronger & Lighter

n Anti-grab Tags

n Reduced InstallationTime & Cost

n Conforms toBS1722 Pt12 : 2006

Using a unique cold roll forming process, we are

able to offer UltraFENCE™ the first complete cold

rolled Security Fencing System.

Whilst exceeding the stringent requirements of

BS1722 Pt12; 2006 the

system is lighter, stronger

and more economical

than conventional pal-

isade fencing systems.

The system consists ofthree rolled components:

n UltraPALEn UltraRAILn UltraPOST

UltraFENCECOLD ROLLED

PALISADE

FENCING SYSTEM

HEIGHT

Fencing is supplied to BS1722 Part 12 : 2006in a standard range of 1.8, 2.0, 2.1, 2.4, 3.0and 3.6 metre heights.

In addition non standard fence configurationscan be manufactured for specific requirements.

NB: UltraPOST is available up to and including3 metre max.

KEY

1. Fish plate to which Top and Bottom Rail arefixed using M12 anti-vandal fixings.

2. Top Rail - UltraRAIL™ to which pales arefixed using UltraBOLT or UltraRIVET.

3. Bottom Rail - UltraRAIL™ to which pales arebolted using UltraBOLT or UltraRIVET.

4. Standard UltraPOST’s™.

5. Fencing Pale: UltraPALE™.

6. Concrete foundation.

PALING HEADSWe supply a selection of heads that can be usedwith our fencing systems and care should be takento select the correct head to suit the requirementneeded for your project.

Whitten Metalworks, Unit 4, 39 Willow Lane, Mitcham, Surrey CR4 4NA

Telephone: 020 8640 3888

Fax: 020 8640 6999WHIT/2/08

www.securedbydesign.com

FIXINGS

1.8

-3.

6mST

ANDA

RDHE

IGHT

2750mm 17 pales @ 154mm centres 143mm143mm

TYPICAL CONSTRUCTION FOR UltraFENCE™

3

6

5

4

1

2

M8 UltraBOLT: M8 bolt with tamper proofsnap off cone nut, suitable for use with generalpurpose (GP) and security palisade fences (SP).

M8 RIVETS: 8mm rivets with collars.M6 RIVETS: Available upon

request (does notcomply withBS1722 Pt12: 2006)

M12 Bolt: M12 cup square bolt with conesnap off tamper proof nut, suitable for use withgeneral purpose (GP) and security palisade fences (SP).

ROUND TOP& NOTCHED

ROUNDTOP

TRIPLEPOINTED

SINGLEPOINT

FLATTOP

Specifications™

www.whittenmetalworks.co.uk

Page 2: Specifications UltraFENCE - Whitten Metal Works FENCE.pdfCOLD ROLLED PALISADE FENCING SYSTEM. HEIGHT Fencing is supplied to BS1722 Part 12 : 2006 in a standard range of 1.8, 2.0, 2.1,

theSYSTEMUltraFENCECOLD ROLLEDPALISADE

FENCING

SYSTEM

A STRONG DURABLEPERIMETER SECURITY SYSTEM

UltraPALE™ is a new concept in steel palisadefencing; the unique design is a result of extensiveresearch and testing.

This lighter yet stronger product incorporatesour unique patented bolt head protection whicheliminates the opportunity to breach the fence byremoving the heads of fixing bolts with a chisel.

PA

LE

RANGE PERFORMANCE RECOMMENDED

REFERENCE USAGE

ULTRA 100 STANDARD SECURITY BOUNDARY FENCING

ULTRA 200 GENERAL PURPOSE SCHOOLS, CAMPUS ANDINDUSTRIAL SITES

ULTRA 300 SECURITY PURPOSE ELECTRICAL/GAS INSTALLATIONS

RA

IL

STEEL PALISADE SUPPORT RAILS

UltraRAIL™ has been developed using coldrolled technology and extensive testing,resulting in a unique lightweight rail that is bothstronger & lighter than existing standard45 x 45mm or 50 x 50mm rails as suggestedin BS 1722 Pt12 : 2006.

The aesthetic design and strength of the newprofile offers many advantages;

l Reduced sag as seen on standard rails

l Need for 'Anti-Sag Legs' eliminated

l Reduced risk of Anti-vandal fixings beingtampered with

l Standard fish plate connections

l Security features in the form of Anti-Grabtags and sloping top discourage intrudersfrom using the rail to assist in climbing

l Standard paling and rail-to-pale fixings

N.B. UltraRAIL™ top rails are supplied withoutAnti-Grab tags when round top and notchedpales are specified.

Bottom Rail Construction

Top Rail Construction

Fish Plate

UltraPALE™

UltraPOST™

UltraBOLT

UltraRAIL™

UltraRAIL™

UltraBOLT

Pale Heads,see overleaf.

UltraPALE™

STEEL PALISADE SUPPORT POST.

UltraPOST™ is a technological break throughin fence post design which has again resulted ina unique lightweight product that out performsthe standard 102 x 44 hot rolled steel joistscurrently used in the palisade market.

UltraPOST's aesthetic design maintains theappearance of standard posts but offers manyadvantages;

l Slotted to fit standard fish plates

l Pierced at bottom of post to key into concrete

l Lightweight construction for ease of handlingwithout loss of strength

UltraRAIL’s & UltraPOST™ are available HotDipped Galvanised, or Polyester Powder Coated.

Pierced Holesfor keyinginto concrete

PO

ST

The edges of the profile are finished with a neatreturn edge that provides further strength andsafety along the length of the pale making it idealfor use around schools etc.

Each batch of UltraPALE™ that is manufactured, isperformance tested to BS1722 Part12 : 2006 toensure that fencing is supplied to the higheststandard available. Where product is sold tostandard a certificate of conformity is available.

FIXINGS:Fixings can be found on final page.

www.securedbydesign.com