Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
9”(229mm)
4-13/16”(123mm)
20” (508mm)
6-5/8”(168mm)
2-1/2”(64mm)
4-7/8”(124mm)
14-13/16" (376mm) OPEN POSITION
2-1/2"
5/8"(16mm)
(64mm) MAX.
OPTIONAL ESCUTCHEON6" X 2-1/2"
(152mm) X (64mm)
**5-5/8" (143mm) Vessel Extension x2
BackSplash
2-1/2" min for lift rod operation
17-7/8"(454mm)
DESCRIPTION • Metal construction with various finishes identified by suffix• Includes metal or 50/50 waste assembly where noted• Includes optional 3 hole deck plate (escutcheon)• Flexible supplies with 3/8" compression fittingsOPERATION• Temperature controlled by 100° arc of handle travelFLOW• Water usage is limited to these maximum flow rates as indicated by the
corresponding product markings° 1.2 gpm max (4.5L/min) at 60 psi° 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE• 1255™ Duralast™ cartridge for Single-Handle FaucetsSTANDARDS• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, and all
applicable requirements referenced therein• Certified to NSF 61/9 & 372• Products marked with 1.2 gpm are compliant with California water
efficiency regulations• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act• ADA for lever handleWARRANTY• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOENwww.moen.comRev. 3/16
There is more than 1 version of this model.Page down to identify the version you have.
BRANTFORD™Single-Handle Lavatory Faucet
Models: 6600with metal waste assembly
Models: 66600with 50/50 waste assembly
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLEDTHRU 1 HOLE, 1-1/8" MIN. DIA. * USE A1717 EXTENSION
KIT FOR VESSEL SINK APPLICATIONS
9”(229mm)
4-13/16”(123mm)
20” (508mm)
6-5/8”(168mm)
2-1/2”(64mm)
4-7/8”(124mm)
14-13/16" (376mm) OPEN POSITION
2-1/2"
5/8"(16mm)
(64mm) MAX.
OPTIONAL ESCUTCHEON6" X 2-1/2"
(152mm) X (64mm)
**5-5/8" (143mm) Vessel Extension x2
BackSplash
2-1/2" min for lift rod operation
17-7/8"(454mm)
CRITICAL DIMENSIONS(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOENwww.moen.comRev. 3/16
S p e c i f i c a t i o n s
BRANTFORD™Single-Handle Lavatory Faucet
Models: 6600with metal waste assembly
Models: 66600with 50/50 waste assembly
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLEDTHRU 1 HOLE, 1-1/8" MIN. DIA. * USE A1717 EXTENSION
KIT FOR VESSEL SINK APPLICATIONS
DESCRIPTION • Metal construction with various finishes identified by suffix• Includes metal or 50/50 waste assembly where noted• Includes optional 3 hole deck plate (escutcheon)• Flexible supplies with 3/8" compression fittingsOPERATION• Temperature controlled by 100° arc of handle travelFLOW• Water usage is limited to these maximum flow rates as indicated by the
corresponding product markings° 1.2 gpm max (4.5L/min) at 60 psi° 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE• 1255™ Duralast™ cartridge for Single-Handle FaucetsSTANDARDS• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, and all
applicable requirements referenced therein• Certified to NSF 61/9 & 372• Products marked with 1.2 gpm are compliant with California water
efficiency regulations• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act• ADA for lever handleWARRANTY• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser• 5 year warranty if used in commercial installations