SPECIFICATIONS

Approximately 3L to 6L per hour 0.25m2 evaporator (6” diameter) Hi precision PTFE rollers All PTFE and Viton gaskets Up to 20L material flask 230V 60Hz 1~Phase HUBER or JULABO chiller/heater Agilent precision high vacuum gauge and diffusion pump Welch or Edwards vacuum pump PolyScience immersion cooler Footprint: 91 x 24 x 86” (WxDxH) UL/CSA certified

                                            

FEATURES

High precision PTFE rollers and inner glass/stainless steel surface allow a complete and uniform thin film on the heated surface, and prevent process residue

Pre-installed cooling/heating tubing with fluid direction labels and M16 ports Gear pumps for continuous distillation Driving motor with magnetic coupling sealing ensures high vacuum level High borosilicate glass 3.3, stainless steel and Viton gaskets for ultimate corrosion resistance Transparent glass system allows you to see thru all processes Auto delay safety circuit for diffusion pump cooling Heavy duty stainless steel frame with stationable casters for mobility and stability Ai on-site installation within contiguous US included

CAUTION!

Never fill circulated heaters or chillers with water, always use Ai recommended fluid Always leave ample fluid space in heater reservoir to allow fluid heat expansion Always keep system vacuum passage or drain valve open when heating up circulation jackets Always make sure your vacuum pumps and diffusion pump fluid is clean and within limits

  Ai TRANING CLASSES

1-2 day class on Ai Thin Film Distillation Systems, including setup, operation, cleaning and maintenance procedures.

Class is private with five students limit. Student requirements should be presented to

Ai prior to arrival. Courses can be customized to meet your extraction goals, allowing you to optimize your time and output.

Students are responsible for their own accommodations.

LOCATION: 600 SPICE ISLANDS DR., SPARKS, NV