Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Z-Power LED X10490
Z-Power LED X10490
Technical Data Sheet
Rev. 1.00 Rev. 1.00
May 2009May 2009
www.acriche.comwww.acriche.com
Document No. : SSC-QP-7-07-24 (Rev.00)
SpecificationSWAA05
CUSTOMER
Approved byChecked by
SUPPLIER
Approved byDrawn by
Z-Power LED X10490
Z-Power LED X10490
Technical Data Sheet
Rev. 1.00 Rev. 1.00
May 2009May 2009
www.acriche.comwww.acriche.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Contents
1. Description
2. Absolute Maximum Ratings
3. Electro-Optical Characteristics
4. Characteristic Diagram
5. Reliability Test Item and Condition
6. Rank of SWAA05
7. Material
8. Outline Dimension
9. Packing
10. Soldering
11. Precaution for Use
Z-Power LED X10490
Z-Power LED X10490
Technical Data Sheet
Rev. 1.00 Rev. 1.00
May 2009May 2009
www.acriche.comwww.acriche.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Revision HistoryRevision History
The institution of New Spec.December. 2120091.00
SummaryPage.DateRevision No.
Z-Power LED X10490
Technical Data Sheet
Rev. 1.00 Rev. 1.00
April 2009April 2009
www.acriche.comwww.acriche.com
Document No. : SSC-QP-7-07-24 (Rev.00)
SWAA051.Description
• 1-chip in one package
• SMT solderability
• Own patent reserved
• RoHS Compliant
• Low Thermal Resistance
• Pb-free Reflow Soldering application
• SWAA05 is very useful side view LED in back light unit
application • Flat Backlighting (LCD, Display)
• Mobile Phone, Camera, PDA,
Notebook
• Coupling into Light Guide Panel
• AV systems
Features
Applications
SWAA05
• 2.8 (W) X 1.2 (D) X 0.8 (T) mm
• Side View LED of Reflector type
Z-Power LED X10490
Z-Power LED X10490
Technical Data Sheet
Rev. 1.00 Rev. 1.00
May 2009May 2009
www.acriche.comwww.acriche.com
Document No. : SSC-QP-7-07-24 (Rev.00)
2. Absolute Maximum Ratings*1
ºC125TjJunction Temperature
ºC-40 ~ +100TstgStorage Temperature
ºC-30 ~ +85ToprOperating Temperature
V5VRReverse Voltage
mA100IFM *2Peak Forward Current
mA30IFForward Current
mW120PdPower Dissipation
UnitValueSymbolParameter
*1 Care is to be taken that power dissipation does not exceed the absolute maximum rating of the product.*2 IFM was measured at TW ≤ 0.1msec of pulse width and D ≤ 1/10 of duty ratio.
3. Electro-Optical Characteristics
1800-1700
IF =20mAIV
S17H
1600-1500S15H
1500-1400S14H
mcd
1400-1300S13H
Rank Z32
Rank Z30
3.4-3.2
3.2-3.0
1700-1600S16H
S12H
VF
Rank Z28
deg.120IF =20mA2θ ½Viewing Angle *2
1300-1200
Luminous Intensity*1
µA50--VR=5VIRReverse Current
V
3.0-2.8
IF =20mAForward Voltage
UnitMaxTypMinConditionSymbolParameter
*1 Luminous intensity IV is measured at the peak of the spatial pattern which may not be aligned with the mechanicalaxis of the LED package. Luminous Intensity Measurement allowance is ±10%.
*2 θ1/2 is the off-axis where the luminous intensity is 1/2 of the peak intensity. * Note : All products confirm to the listed minimum and maximum specifications for electric and optical characteristics,
when operated at 20mA within the maximum ratings shown above. * All measurements were made under the standardized environment of Seoul Semiconductor.
(Ta = 25℃)
(Ta = 25℃)
Z-Power LED X10490
Z-Power LED X10490
Technical Data Sheet
Rev. 1.00 Rev. 1.00
May 2009May 2009
www.acriche.comwww.acriche.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Radiation DiagramForward Current vs. Ambient Temperature
Intensity vs. Forward CurrentForward Current vs. Forward Voltage
4. Characteristic Diagram
(Ta=25 OC )
-30 -15 0 15 30 45 60 75 900
5
10
15
20
25
30
Forw
ard
cu
rren
t [m
A]
Ambient temperature [oC]
yx
2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4
1
10
Ta = 25OC
Forw
ard
Cu
rren
t [m
A]
Forward Voltage [V]
0 5 10 15 20 25 30 350
400
800
1200
1600
2000
2400
2800 Ta = 25OC
Inte
nsi
ty [
mcd
]
Forward Current [mA]
-100 -80 -60 -40 -20 0 20 40 60 80 1000.0
0.5
1.0 Ta = 25OC x axis y axis
Inte
nsi
ty
Theta
Z-Power LED X10490
Z-Power LED X10490
Technical Data Sheet
Rev. 1.00 Rev. 1.00
May 2009May 2009
www.acriche.comwww.acriche.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Color Coordinate vs. Ambient TemperatureForward Voltage vs. Ambient Temperature
Spectrum Color Coordinate vs. Forward Current
0.295 0.296 0.297 0.298 0.2990.279
0.280
0.281
0.282
0.283
0.284
20 mA
15 mA
10 mA
5 mA
Ta = 25OC
1 mA
30 mA
y C
oord
.
x Coord.
400 500 600 700 800
Ta = 25OC IF = 20 mA
Inte
nsi
ty [
%]
Wavelength [nm]
-30 -15 0 15 30 45 60 75 900.80
0.85
0.90
0.95
1.00
1.05
1.10
1.15
1.20 IF = 20 mA
VF
/ VF
[2
5OC
]
Ambient Temperature [oC]0.27 0.28 0.29 0.30 0.31
0.26
0.27
0.28
0.29
0.30
45oC
65oC
25oC
IF = 20 mA
y C
oord
.
x Coord.
-30oC
85oC
Z-Power LED X10490
Z-Power LED X10490
Technical Data Sheet
Rev. 1.00 Rev. 1.00
May 2009May 2009
www.acriche.comwww.acriche.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Allowable Forward Current vs. Duty Ratio Relative Luminosity vs. Ambient Temperature
1 10 100
20
40
60
80
100
120
Ta = 25OC
Allo
wab
le F
orw
ard
Cu
rren
t [
mA
]
Duty Ratio [%]
(If = 20mA )
-30 -15 0 15 30 45 60 75 900.7
0.8
0.9
1.0
1.1
1.2
I v /
I v
[25o C
]
Ambient Temperature [oC]
Z-Power LED X10490
Z-Power LED X10490
Technical Data Sheet
Rev. 1.00 Rev. 1.00
May 2009May 2009
www.acriche.comwww.acriche.com
Document No. : SSC-QP-7-07-24 (Rev.00)
0/5010 cycle25℃ ~ 65℃ ~ -10℃TH = 90%, 24 hr / 1 cycle
JEITA ED-4701200 203
Moisture Resistance Cycle
0/50100 cycle-40℃ ~ 25℃ ~ 100℃ ~ 25℃(30min) (5min) (30min) (5min)
JEITA ED-4701100 105Temperature Cycle
0/501 timesover 95%
Tsld = 215±5℃, 3 sec(Lead Solder)
JEITA ED-4701303
Solder Ability(Reflow Soldering)
0/502 timesTsld = 260℃, 10 secpre treatment ; 30℃, 70%, 168hrs
JEITA ED-4701301 302
Resistance to Soldering Heat
0/20500Hours
Ta = 60℃, RH = 90%, IF = 20mAJEITA ED-4701100 102
High Humidity Heat Life Test
0/201,000 HoursTa = 85℃, RH = 85%JEITA ED-4701
100 103Humidity Heat
Load
0/201,000 HoursTa = -40℃
JEITA ED-4701200 202
Low Temperature Storage
0/5020 CycleTa = -30℃ (30MIN) ~ 85℃ (30MIN)JEITA ED-4701300 307Thermal Shock
0/201,000 HoursTa = 85℃, IF = 5mA-High Temperature
Life Test
0/201,000 Hours
Ta = -30℃, IF = 20mA-Low Temperature Life Test
0/20500Hours
Ta = 25℃, IF = 30mAJEITA ED-4701100 101
Life Test 2
0/201,000 HoursTa = 100℃
JEITA ED-4701200 201
High Temperature Storage
0/201,000 Hours
Ta = 25℃, IF = 20mAJEITA ED-4701100 101
Life Test 1
Number of Damage
Duration/ Cycle
Test ConditionReferenceItem
-LSL*2 × 0.5IF =20mAIVLuminous Intensity
USL × 2.0-VR=5VIRReverse Current
USL*1 × 1.2-IF =20mAVFForward Voltage
MAXMIN
Criteria for JudgmentConditionSymbolItem
Note : *1 USL : Upper Standard Level *2 LSL : Lower Standard Level
* Criteria for Judging the Damage
5. Reliability Test
* Test Items and Results
Z-Power LED X10490
Z-Power LED X10490
Technical Data Sheet
Rev. 1.00 Rev. 1.00
May 2009May 2009
www.acriche.comwww.acriche.com
Document No. : SSC-QP-7-07-24 (Rev.00)
* CIE Chromaticity Diagram
6. Rank of SWAA05
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.80.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
460470
475480
485
490
495
500
505
510
515520525
530535
540545
550555
560565
570575
580585
590595
600610
620630830
y C
oord
.
x C o o r d .
0.290
0.304
0.315
0.301
Y
0.304
0.312
0.307
0.299
x
I2S
0.27600.29600.26200.28800.24800.2800
0.29000.30400.27600.29600.26200.2880
0.30100.29900.28700.29100.27200.2820
0.28700.29100.27200.28200.25700.2730
yxyxyx
G2SE2SC2S
* Color Rank
0.26 0.28 0.30 0.32 0.340.22
0.24
0.26
0.28
0.30
0.32
0.34
I2S
G2S
E2S
C2S
y C
oord
.
x C o o r d .
ChipEncapsulateWireReflectorItem
GaNSiliconeGoldPPAMaterial
7. Material
* Measurement Uncertainty of the Color Coordinates is ±0.01
Z-Power LED X10490
Z-Power LED X10490
Technical Data Sheet
Rev. 1.00 Rev. 1.00
May 2009May 2009
www.acriche.comwww.acriche.com
Document No. : SSC-QP-7-07-24 (Rev.00)
( Tolerance: ±0.1, Unit: mm )
8. Outline Dimension
[Bottom View]
<Recommended solder Pattern>
Cathode Anode
Cathode Mark MOLD GATE
Z-Power LED X10490
Z-Power LED X10490
Technical Data Sheet
Rev. 1.00 Rev. 1.00
May 2009May 2009
www.acriche.comwww.acriche.com
Document No. : SSC-QP-7-07-24 (Rev.00)
(1) Quantity : 3500pcs/Reel(2) Cumulative Tolerance : Cumulative Tolerance/10 pitches to be ±0.2mm(3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned
off from the carrier tape at the angle of 10º to the carrier tape(4) Package : P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package
( Tolerance: ±0.2, Unit: mm )
Label
1809
11.4
2
13 ±0.2
22
±0.260
-0
+0.2
-3+0
±0.3
9. Packing
SECTION B-B'
Cathode
+0.1
Anode
-0 2.0±0.05
8.0
±0.0
5
4.0±0.1
4.0±0.1
Z-Power LED X10490
Z-Power LED X10490
Technical Data Sheet
Rev. 1.00 Rev. 1.00
May 2009May 2009
www.acriche.comwww.acriche.com
Document No. : SSC-QP-7-07-24 (Rev.00)
ExampleMeaningSymbol
8 for 2008, 9 for 2009, 10 for 2010 ‥‥Year○
01 for Jan., 02 for Feb., ‥‥ 12 for Dec.Month□□
01, 02, 03, 04, 05, ‥‥ 27, 28, 29, 30, 31Day◎◎
001, 002, 003, 004, 005, 006, 007 ‥‥Number◇◇◇
SWAA05 ○□□◎◎ ◇◇◇
• Lot NumberThe lot number is composed of the following characters
LOT NUMBER : XXXXXXXX
Material : Paper(SW3B(B))
SSC PART NUMBER : XXXXXXXX
SEOUL AcricheSemiconductor EcoLight
RoHS
TUV
a
MADE IN KOREA
TYPE
b 7inch
c
SIZE (mm)
220245245 220
a b14280
c
QUANTITY : XXXX
Barcode Label
Reel
RANK :
Outer Box Structure
XXX
Humidity indicator
Desiccant
Aluminum Vinyl Bag
SWAF05SWAA05
Z-Power LED X10490
Z-Power LED X10490
Technical Data Sheet
Rev. 1.00 Rev. 1.00
May 2009May 2009
www.acriche.comwww.acriche.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Preliminary heating to be at maximum 220°C for maximum 2 minutes.Soldering heat to be at maximum 260°C for maximum 10 seconds.
(1) Lead Solder
(2) Lead-Free Solder
(3) Hand Soldering conditions
Not more than 5 seconds @MAX 300°C, under Soldering iron.
Note : In case that the soldered products are reused in soldering process, we don’t guarantee the products.
Preliminary heating to be at maximum 210°C for maximum 2 minutes.Soldering heat to be at maximum 240°C for maximum 10 seconds.
0 15 30 45 60 75 90 105 120 135 150 165 180 1950
40
80
120
160
200
240
280
Soldering Times [sec]
Dev
ice
Surf
ace
Tem
pera
ture
[o C]
0 15 30 45 60 75 90 105 120 135 150 165 180 1950
40
80
120
160
200
240
280
Dev
ice
Surf
ace
Tem
pera
ture
[o C]
Soldering Times [sec]
10. Soldering
Z-Power LED X10490
Z-Power LED X10490
Technical Data Sheet
Rev. 1.00 Rev. 1.00
May 2009May 2009
www.acriche.comwww.acriche.com
Document No. : SSC-QP-7-07-24 (Rev.00)
11. Precaution for Use
(1) Storage conditions
• Keep the product in a dry box or a desiccator with a desiccant in order to prevent moisture absorption.a. Keep it at a temperature in the range from 5°C to 30°C and at a humidity of less
than 50% RH.• In case of being stored for more than 3 months, the product should be sealed with
Nitrogen gas.
(2) After opening the package .
• When soldering, this could result in a decrease of the photoelectric effect or light intensity.a. Soldering should be done right after mounting the product.b. Keep the temperature in the range from 5°C to 30°C and the humidity at less
than 30%.• Soldering should be done within 7 days after opening the desiccant package.
If the product has been exposed for more than 7 days after opening the package or the indicating color of the desiccator changes, the product must be baked at a temperature between 65 ± 5°C for 10 to 24 hours.
• An unused and unsealed product should be repacked in a desiccant package and kept sealed in a dry atmosphere.
(3) Precautions for use
• Any external mechanical force or excessive vibration should not be applied to the product during cooling after soldering, and it is preferable to avoid rapid cooling.
• The product should not be mounted on a distorted part of PCB.• Gloves or wrist bands for ESD(Electric Static Discharge) should be wore in order to
prevent ESD and surge damage, and all devices and equipments must be grounded to the earth.
(4) Miscellaneous
• Radiation resistance is not considered.• When cleaning the product, any kind of fluid such as water, oil and organic solvent
must not be used and IPA(Isopropyl Alcohol) must be used.• When using the product, operating current should be settled in consideration of the
maximum ambient temperature.• Its appearance or specification for improvement is subject to change without notice.