Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
Specification sheet
Ultimaker 2+
TechnologyPrint headBuild volumeFilament diameterLayer resolution
XYZ accuracyPrint head travel speedBuild speed
Build plateBuild plate temperature Build plate levelingSupported materialsNozzle diameterNozzle temperatureNozzle heat up timeBuild plate heat up timeOperating soundConnectivity
Fused Deposition Modeling (FDM)Swappable nozzle223 x 223 x 205 mm2.85 mm0.25 mm nozzle: 150 to 60 micron0.40 mm nozzle: 200 to 20 micron0.60 mm nozzle: 400 to 20 micron0.80 mm nozzle: 600 to 20 micron12.5, 12.5, 5 micron30 to 300 mm/s0.25 mm nozzle: up to 8 mm3/s0.40 mm nozzle: up to 16 mm3/s0.60 mm nozzle: up to 23 mm3/s0.80 mm nozzle: up to 24 mm3/sHeated glass build plate50 to 100 °CAssisted leveling processPLA, ABS, CPE, CPE+, PC, Nylon, TPU 95AIncluded are 0.25, 0.4, 0.6 and 0.8 mm nozzles180 to 260 °C~ 1 minute< 4 minutes50 dBAStandalone 3D printing from SD card (included)
Printer and printing properties
Specifications
Physical dimensions
Power requirements
Software
Ambient conditions
DimensionsDimensions (with bowden tube and spool holder)Nett weightShipping weightShipping box dimensions
Input
Output
342 x 357 x 388 mm342 x 493 x 588 mm11,3 kg18,5 kg390 x 400 x 565 mm
100 - 240V4A, 50-60Hz221 W max.24 V DC, 9.2 A
Operating ambient temperature
Nonoperating temperature
15 - 32 ºCSee material specifications for optimal conditions0 - 32 ºC
Supplied softwareSupported OSFile types
Cura, our free print preparation softwaremacOS, Windows and LinuxSTL, OBJ and AMF