SPECIFICATION DATA PROFILE SPOKE 40 UP | 60 DN LED …ps1-a. profile spoke 40 up | 60 dn led (ps1-a) control dali log fluxwerx

PROFILE SPOKE 40 UP | 60 DN LED (PS1-A)

PAGE 1 of 10PS1-A | 2019-08

All rights reserved. © Fluxwerx Illumination Inc 2019 604.549.9379 | fluxwerx.comDue to continuous product improvements, specifications and dimensions are subject to change without notice. Certain options have limited compatibility with some other product selections. Consult www.fluxwerx.com for most current technical information.

SPECIFICATION DATA

TYPE

PROFILE 4 SPOKE (S4)

PROFILE 3 SPOKE (S3)CATALOG #

PROJECT

NOTES

PERFORMANCE SUMMARY

FEATURES

• Open aperture design with fully luminous interior. No horizontal lenses or diffusers.

• Choice of 120° 3-spoke (S3) or 90° 4-spoke (S4) precision machined, clear anodized aluminum body.

• Five endcap options, preinstalled for perfect fit and finish, with matching sharp or rounded hub corner detail.

• Powered by low voltage stainless steel conductive aircraft cables. No visible power cords.

• Luminaires spaced 12' x 12' deliver 40–50 fc at 0.4 to 0.5 W/ft.

• Direct and direct/indirect general area lighting distributions and independent Up | Dn dimming control available.

• Dynamic white enabled.

42.4% Up | 57.6% Dn

A B C D

Light (lm)S3

3500 4300 5200 6800

Energy (W) 28 34 44 57

Light (lm)S4

4700 5800 7000 9000

Energy (W) 38 46 58 76

Efficacy (lm/W) 128 127 126 123

Color Rendering (CRI) 80+

Color Accuracy (SDCM) < 2

L70 Estimate (h) 200,000

Lumen Maintenance per TM21 (@ 60,000 h) L90

Summary values are nominal and based on 4000K CCT.

3 SPOKE + CAPSULE (P) ENDCAPS

4 SPOKE + BEVEL (B) ENDCAPS

40.7"(1035)

26.2"(666)

47"(1194)

26.2"(666)

39.4"(1000)

39.4"(1000)


PAGE 2 of 10PS1-A | 2019-08


SPECIFICATION DATA

TYPE

1 FAMILY 2 ENDCAP 3OPTICAL DISTRIBUTION

4 ENERGY 1 5 CCT 6 FINISH 3

PS1 Profile Spoke Area A

B

F

P

S

Angle

Bevel

Flat

Capsule

Square

A

B

D

E

F

G

40 Up | 60 Dn

100 Dn

20 Up | 80 Dn

50 Up | 50 Dn

60 Up | 40 Dn

80 Up | 20 Dn

S3

A

B

C

D

28 W

34 W

44 W

57 W 2

S4

A

B

C

D

38 W

46 W

58 W

76 W

30

35

40

W2

3000 K

3500 K

4000 K

2700– 6500 K 9

A

B

S

W

C

Clear Anodized

Black Powdercoat

Metallic Silver Powdercoat

White Powdercoat

Custom Color (RAL)

1 Nominal input power /4ft. For 347 V with E1-4/L1/W1 add 4 W.

2 Single CCT versions only.

3 Matching fixture and canopy finish (silver canopy for clear anodized fixture).

ORDER GUIDE

7 VERSION 8 CEILING TYPE 4 9 DRIVER 10 VOLTAGE 11 SUSPENSION 6

S3

S4

3 Spoke

4 Spoke

D

G

S

R

Drywall

Grid

Structure

Remote

F1

F2

F3

E1

E2

E3

E4

L1

W1

Non-Dim

0–10 V Dim 3% 120–277 V

0–10 V Dim 3% 347 V (Class 2 control wiring)

eldoLED ECO 0–10 V Dim 1%

eldoLED SOLO 0–10 V Dim 0.1%

eldoLED ECO DALI Dim 1%

eldoLED SOLO DALI Dim 0.1%

Lutron Hi-Lume 1% EcoSystem (LDE1)

eldoLED DUAL DALI Dynamic White 0.1% 9

M

3

120–277 V

347 V 5

03

06

12

25

≤ 3 ft

≤ 6 ft

≤ 12 ft

≤ 25 ft

4 Integrated driver with mounting, power feed, suspension + canopy, except for remote.

5 347 V Driver for F1/F3. 347 V Transformer & Driver for E1-4/L1/W1.

6 Tapered suspension cables over 3 ft, see next page.

OPTIONS CONTROLS

WIRING & EMERGENCY 7 SENSORS & CONTROLLERS DYNAMIC WHITE 10

B

C

H

Battery Pack

Chicago Plenum

Emergency Switching(GTD or Controller)

SE1

RE1

VN1

Canopy Integrated Enlighted Smart Sensor 8

Remote Enlighted Smart Sensor

Acuity nLight Converter 9

WF1

WN1

WC1

WC2

WD1

WD2

Fluxwerx Wall Control

Acuity nLight

0–10 V Linear Dim

0–10 V Log Dim

DALI Linear Dim

DALI Inverse Log Dim8 Enlighted with Independent Up | Dn control requires 2 sensors per luminaire. One can be canopy integrated (SE1) but the other must be remote mounted (RE1).

9 nLight in Drywall (D) and Structure (S) ceilings uses remote driver enclosure.7 BP & GTD available for 120–277 V.

10 Dynamic White is available with 40 | 60 (A) & 100 Dn (B) distributions. Use W1 driver. Refer to later section for DW spec & performance details.

1 2 3 4 5 6 7 8 9 10 11 OPTIONS CONTROLS

PS1 A


PAGE 3 of 10PS1-A | 2019-08


SPECIFICATION DATA

TYPE

CANOPIES

SUSPENSION

Powered by low voltage stainless steel conductive aircraft cables.

Canopy finish will match fixture finish unless otherwise specified. Anodized canopies are not available.

3 SPOKEStraight cables up to 3 ft

4 SPOKEStraight cables up to 3 ft

3 SPOKETapered cables over 3 ft

4 SPOKETapered cables over 3 ft

12.5"(318)

(G) Grid

(D) Drywall

0.45"(11)

(S) Structure

(R) Remote

12.5"(318)

2.3"(59)


PAGE 4 of 10PS1-A | 2019-08


SPECIFICATION DATA

TYPE

ENDCAP OPTIONS CROSS SECTION

HUB CORNERS

ROUNDED HUB CORNERSHARP HUB CORNER

2.35"(60)

3.25"(83)

3.1"(79)

Sharp hub corner detail with these endcaps:

– Angle (A)– Bevel (B)– Flat (F)– Square (S)

Rounded hub corner detail with Capsule (P) endcap

(F) FLAT(B) BEVEL

(S) SQUARE

(A) ANGLE

(P) CAPSULE


PAGE 5 of 10PS1-A | 2019-08


SPECIFICATION DATA

TYPE

Enlighted Sensor Option: (D) DRYWALL or (G) GRID

Canopy Integrated SensorSpoke round canopy preinstalled with Enlighted wireless sensor plus separate, large driver enclosure with Enlighted control unit. Plenum rated cable whip and RJ45 plugs enable quick field connection.

Remote SensorEnlighted wireless sensor supplied with Enlighted tile mount collar for remote sensor placement in drywall or ceiling tile. Plenum rated cable whips and RJ45 plugs enable quick field connection.

Enlighted Sensor Option: (S) STRUCTURE or (R) REMOTE

Canopy Integrated SensorSpoke round canopy preinstalled with Enlighted wireless sensor plus separate, large driver enclosure with Enlighted control unit. Plenum rated cable whip and RJ45 plugs enable quick field connection.

Remote SensorEnlighted wireless sensor supplied with tile mount collar for remote sensor placement to a horizontal surface or jBox lid (by others). Plenum rated cable whips and RJ45 plugs enable quick sensor field connection.

(R) REMOTE

• External remote mounted driver

• Powered suspension cable mounts for exposed or recessed junction box

(G) GRID OFF Grid Only

• Integrated Driver + Powered Suspension Cable Mounts

• Integrated Hanger bars for 12, 20 or 24" grid spacing

(D) DRYWALL New or Retrofit


• Requires Structural members on 2 sides

• Default mount tab for 5/8" GWB

(S) STRUCTURE Exposed Ceilings


• For exposed surface conduit or recessed junction box

INTEGRATED DRIVER, MOUNTING, POWER FEEDS + SUSPENSIONRefer to separate product specification datasheets for detailed dimensions of mounting hardware components, driver enclosures, canopies and wiring.

Recessed 120–277 V / Mounting Surface 120–277 V, Mounting + CanopyRecessed 120–277 V / Mounting

Surface 120–277 V, Mounting + Canopy + Driver

Battery Pack or 347 V Option: (D) DRYWALL or (G) GRID

120–277 V 347 V Battery Pack Canopy Integrated Enlighted Sensor

0–10 V Dim Lutron eldoLED Remote Enlighted Sensor

Battery Pack or 347 V Option: (S) STRUCTURE or (R) REMOTE

120–277 V 347 V Battery Pack Canopy Integrated Enlighted Sensor

0–10 V Dim Lutron eldoLED Remote Enlighted Sensor

Driver Enclosure must be in accessible location


PAGE 6 of 10PS1-A | 2019-08


SPECIFICATION DATA

TYPE

CONTROLS & SENSORS

Fluxwerx products are designed for simple integration with a wide range of sensors, lighting controls and building management systems. Many projects incorporate occupancy sensing, daylight harvesting, individual or central adjustment of light levels and luminaire or space monitoring in order to save energy, reduce costs and maximize occupant comfort. Fluxwerx offers a number of standard driver and controller options to support various wired and wireless network protocols. In our suspended products, the packaging of drivers and controls in the mounting system maintains clean aesthetics, simplifies installation & maintenance, increases flexibility and supports future system upgrades.

nLight wired, 2-way network supports luminaire light level control as well as occupancy and daylight sensors. Option: Acuity nLight Converter (VN1) Model: nPS-80-EZ or nPS-80-EZ-ER

Enlighted wireless, networked smart sensor integrates occupancy sensing, daylight harvesting, energy usage, temperature and light level control. Option: Canopy-integrated or remote Enlighted sensor (SE1 or RE1) Model: SU-5E-CL

Lutron EcoSystem network protocol enables on/off, dimming, occupancy sensing and daylight harvesting. Option: EcoSystem Hi Lume 1% (L1)

EldoLED drivers support common wired protocols, 0–10 V and DALI. They also provide access to finer dimming control, dynamic white and Bluetooth low-energy (BLE) wireless. Options: ECO 1% (E1), SOLO 0.1% (E2)

NOTES

CONSTRUCTION

• Anodized, extruded + machined architectural grade aluminum

• Precision machined aluminum joints and endcaps are factory preinstalled for seamless fit

• Stainless steel fasteners

• 0.06” (1.6 mm) low voltage stainless steel conductive aircraft cable suspensions

• Clear anodized surface finish or powdercoated in white, metallic silver or black, (canopies match fixture color as standard — silver for clear anodized)

OPTICAL

• Anidolic optical structures with linear light extraction elements

• Precision molded high transmittance clear acrylic lenses

• Long life mid-flux LED system designed for typical TM21 lumen maintenance ≥ L90 @ 60,000 h

• Available in 3000 K, 3500 K, 4000 K or 2700–6500 K with CRI ≥ 80 and R9 ≥ 0, all with color accurate binning ≤ 2 SDCM

WIRE GAUGE

• Recommended low voltage wire gauge (AWG) for minimal losses over distance when REMOTE mounting:

30 ft | 18 ga

50 ft | 14 ga

80 ft | 12 ga

ENVIRONMENTAL & CARE

• Designed for use in dry or damp indoor locations with ambient temperatures of 0–30° C (32–86° F)

• Not suitable for natatorium environments, e.g. swimming pools, hot tubs and saunas. The luminaire may be damaged by chemicals such as chlorine, solvents, ammonia, alcohol or sulfur in the area of operation or in cleaning products. Damage from contaminants is not covered under warranty.

• Clean only by wiping with a slightly water-damp, soft, clean cloth.

WEIGHT

• 3 Spoke: ~ 23.0 lb (10.4 kg)

• 4 Spoke: ~ 28.0 lb (12.7 kg)

WARRANTY

• 5 year limited warranty on all components and workmanship

INDEPENDENT TESTING

• IESNA LM79

• IESNA LM80 (LED @ 10,000 h)

APPROVALS

• UL Listed (USA + Canada)

• CCEA Chicago Plenum

ELECTRICAL

• No electrical connections are required at fixture level for installation; low voltage power cords factory preinstalled

• High efficiency multivolt drivers, integrated with suspension and mounting components, for 50–60 Hz 120–277 V or 347 V

• Power Factor > 0.90

• Total Harmonic Distortion < 20%

• Dim level: Standard 3%, optional 1% or 0.1%

• Optional Battery Pack delivers 10 W Class 2 rated output for 90 min. Use 12 W input energy to estimate emergency flux, typically 1150–1750 lm (@100–150 lm/W).

• Optional GTD (Generator Transfer Switch), 120–277 V, disables 0–10 V control during emergency for full light output

• Surge Protection: Meets ANSI C82.11 spec and ANSI/IEEE C62.41

• Inrush Current: Meets NEMA 410


PAGE 7 of 10PS1-A | 2019-08


SPECIFICATION DATA

TYPE

A 28 W CCTLIGHT ENERGY EFFICACY COLOR ACCURACY

(lm) (W) (lm/W) (CRI) (R9) (SDCM)

VERSION

PS1-AA40-S34000 K 3507 27.3 128 83 5.3

< 23500 K 3397 27.3 124 83 5.3REPORT BASED ON

11692617.07 3000 K 3287 27.3 120 83 5.3

B 34 W CCTLIGHT ENERGY EFFICACY COLOR ACCURACY


VERSION

PS1-AB40-S34000 K 4341 34.2 127 83 5.2

< 23500 K 4202 34.2 123 83 5.2REPORT BASED ON

11692617.06 3000 K 4064 34.2 119 83 5.2

C 44 W CCTLIGHT ENERGY EFFICACY COLOR ACCURACY


VERSION

PS1-AC40-S34000 K 5237 41.7 126 83 5.2

< 23500 K 5069 41.7 122 83 5.2REPORT BASED ON

11692617.05 3000 K 4902 41.7 118 83 5.2

D 57 W CCTLIGHT ENERGY EFFICACY COLOR ACCURACY


VERSION

PS1-AD40-S34000 K 6788 55.1 123 83 5.1

< 23500 K 6571 55.1 119 83 5.1REPORT BASED ON

11692617.02 3000 K 6354 55.1 116 83 5.1

PERFORMANCE DATA — 3 SPOKE

Photometric data scaled as 6 feet of linear 4 foot Profile photometry. Distribution plot for each leg of Spoke per Profile linear 4 foot photometry.

42.4% Up | 57.6% Dn

Profile Spoke Suspended PS1-A

4000 K


PAGE 8 of 10PS1-A | 2019-08


SPECIFICATION DATA

TYPE

A 38 W CCTLIGHT ENERGY EFFICACY COLOR ACCURACY


VERSION

PS1-AA40-S44000 K 4676 36.5 128 83 5.3

< 23500 K 4529 36.5 124 83 5.3REPORT BASED ON

11692617.07 3000 K 4382 36.5 120 83 5.3

B 46 W CCTLIGHT ENERGY EFFICACY COLOR ACCURACY


VERSION

PS1-AB40-S44000 K 5788 45.6 127 83 5.2

< 23500 K 5603 45.6 123 83 5.2REPORT BASED ON

11692617.06 3000 K 5418 45.6 119 83 5.2

C 58 W CCTLIGHT ENERGY EFFICACY COLOR ACCURACY


VERSION

PS1-AC40-S44000 K 6982 55.5 126 83 5.2

< 23500 K 6759 55.5 122 83 5.2REPORT BASED ON

11692617.05 3000 K 6536 55.5 118 83 5.2

D 76 W CCTLIGHT ENERGY EFFICACY COLOR ACCURACY


VERSION

PS1-AD40-S44000 K 9050 73.5 123 83 5.1

< 23500 K 8761 73.5 119 83 5.1REPORT BASED ON

11692617.02 3000 K 8472 73.4 116 83 5.1

PERFORMANCE DATA — 4 SPOKE

Photometric data scaled as 8 feet of linear 4 foot Profile photometry. Distribution plot for each leg of Spoke per Profile linear 4 foot photometry.

42.4% Up | 57.6% Dn

Profile Spoke Suspended PS1-A

4000 K


PAGE 9 of 10PS1-A | 2019-08


SPECIFICATION DATA

TYPE

DYNAMIC WHITE CONTROL OPTIONS

CONTROLS PROTOCOL

CONTROL CURVE

CONTROLS BRAND

DW CODE

CONTROLLER COMPONENTS* (ordered separately)

DALI

Linear

FLUXWERX WF1 Fluxwerx Wall Controller

e.g. Lutron, Crestron WD1

Controller supplied by othersInverse

Loge.g. Distech, Helvar WD2

nLight Linear Acuity WN1

Controller supplied by others

Field-installed nLight converter per driver (supplied with luminaire)

0–10 V

Linear

e.g. Leviton, Watt Stopper, Crestron, Pass & Seymour

WC1

Fluxwerx 0–10 V converter per zone

Log e.g. Lutron, Cooper Controls WC2

FLUXWERX WALL CONTROLLER

SCENE

LIGHT

100% brightness

0.1% brightness

ON/OFF

Scene buttons:Press + hold to save a scene.Press once to recall.

Color Intensity

* See Dynamic White controller data sheet


PAGE 10 of 10PS1-A | 2019-08


SPECIFICATION DATA

TYPE

A 38 W CCTLIGHT ENERGY EFFICACY COLOR ACCURACY(lm/4ft) (W/4ft) (lm/W) (CRI) (R9)

VERSION

PS1-AAW2-S4

2700 K 4040 39.52 102 82.4 4.5

3000 K 4060 38.2 106 83.9 10.7

3500 K 4180 36.88 113 85.9 19.2

REPORT

FLUXWERX

4000 K 4240 36.28 117 86.7 22.9

5000 K 4240 36.44 116 86 17.9

6500 K 4340 39 111 83.7 4.7

B 46 W CCTLIGHT ENERGY EFFICACY COLOR ACCURACY(lm/4ft) (W/4ft) (lm/W) (CRI) (R9)

VERSION

PS1-ABW2-S4

2700 K 5000 49.6 101 82.4 4.5

3000 K 5040 48.16 105 83.9 10.7

3500 K 5160 46.52 111 85.9 19.2

REPORT

FLUXWERX

4000 K 5240 45.72 115 86.7 22.9

5000 K 5260 45.96 114 86 17.9

6500 K 5360 48.96 109 83.7 4.7

C 58 W CCTLIGHT ENERGY EFFICACY COLOR ACCURACY(lm/4ft) (W/4ft) (lm/W) (CRI) (R9)

VERSION

PS1-ACW2-S4

2700 K 6020 59.6 101 82.4 4.5

3000 K 6060 57.04 106 83.9 10.7

3500 K 6240 55.08 113 85.9 19.2

REPORT

FLUXWERX

4000 K 6320 54.2 117 86.7 22.9

5000 K 6340 54.44 116 86 17.9

6500 K 6460 58.84 110 83.7 4.7

D 76 W CCTLIGHT ENERGY EFFICACY COLOR ACCURACY(lm/4ft) (W/4ft) (lm/W) (CRI) (R9)

VERSION

PS1-ADW2-S4

2700 K 7800 79.04 99 82.4 4.5

3000 K 7880 76.4 103 83.9 10.7

3500 K 8080 73.76 110 85.9 19.2

REPORT

FLUXWERX

4000 K 8200 72.56 113 86.7 22.9

5000 K 8220 72.88 113 86 17.9

6500 K 8400 78.04 108 83.7 4.7

DYNAMIC WHITE PERFORMANCE DATA — 4 SPOKE

Photometric data scaled as 6 feet of linear 4 foot Profile Dynamic White photometry. Distribution plot of each leg of Spoke per Profile linear 4 foot photometry.

A 28 W CCTLIGHT ENERGY EFFICACY COLOR ACCURACY(lm/4ft) (W/4ft) (lm/W) (CRI) (R9)

VERSION

PS1-AAW2-S3

2700 K 3030 29.79 102 82.4 4.5

3000 K 3045 28.53 107 83.9 10.7

3500 K 3135 27.54 114 85.9 19.2

REPORT

FLUXWERX

4000 K 3180 27.09 117 86.7 22.9

5000 K 3180 27.21 117 86 17.9

6500 K 3255 29.4 111 83.7 4.7

B 34 W CCTLIGHT ENERGY EFFICACY COLOR ACCURACY(lm/4ft) (W/4ft) (lm/W) (CRI) (R9)

VERSION

PS1-ABW2-S3

2700 K 4515 45.66 99 82.4 4.5

3000 K 4545 44.85 101 83.9 10.7

3500 K 4680 43.29 108 85.9 19.2

REPORT

FLUXWERX

4000 K 4740 42.57 111 86.7 22.9

5000 K 4755 42.78 111 86 17.9

6500 K 4845 45.09 107 83.7 4.7

C 44 W CCTLIGHT ENERGY EFFICACY COLOR ACCURACY(lm/4ft) (W/4ft) (lm/W) (CRI) (R9)

VERSION

PS1-ACW2-S3

2700 K 3750 36.51 103 82.4 4.5

3000 K 3780 35.13 108 83.9 10.7

3500 K 3870 33.93 114 85.9 19.2

REPORT

FLUXWERX

4000 K 3930 33.36 118 86.7 22.9

5000 K 3945 33.51 118 86 17.9

6500 K 4020 36.06 112 83.7 4.7

DYNAMIC WHITE PERFORMANCE DATA — 3 SPOKE

Photometric data scaled as 6 feet of linear 4 foot Profile Dynamic White photometry. Distribution plot of each leg of Spoke per Profile linear 4 foot photometry.

Documents

SPECIFICATION DATA PROFILE SPOKE 40 UP | 60 DN LED …ps1-a. profile spoke 40 up | 60 dn led (ps1-a) control dali log fluxwerx