77
Specification Catalog March 7, 2011

Specification Catalog - Accent Building Products

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Specification Catalog - Accent Building Products

Specification CatalogMarch 7, 2011

Page 2: Specification Catalog - Accent Building Products

Five (5) Year Limited Warranty

High Point Cabinetry warrants to the original user, for !Household Use! only, asdefined below, that for a five (5) year term, measured from the date of purchase fromHigh Point Cabinetry, that High Point Cabinetry will repair or replace any product ofHigh Point Cabinetry’s manufacture which is defective in material or workmanship.The term !Household Use! shall include use for personal and family purposes as wellas in hotel or motel residential short term rental units, but does not apply to otherpurposes for commercial use. The remedy of repair or replacement (which shallbe at the option of High Point Cabinetry) is the exclusive remedy of the user.Claims for repair or replacement should be submitted to High Point Cabinetryat P. O. Box 870, High Point, NC, 27260-0870.

It is the nature of wood products to have variations in the grain pattern and woodcolor. Any surface finish may be affected by exposure to sunlight and other elementswhich are part of the aging process. These material variations and changes are notcovered by this Warranty. Proper care and use are essential to preserving your rightsto this Warranty. High Point Cabinetry will not repair or replace any product if damageis caused by improper use or maintenance such as the use of abrasives or harshcleaning agents on cabinet surfaces.

Also, this warranty does not cover damage to High Point Cabinetry products fromnegligence, abuse, normal wear and tear, accidents, trauma, fire, water damage, orother catastrophe, or if a product is routinely subjected to steam or unusually highhumidity. Costs related to damages incurred in transit, handling, installation, and allcosts related to the transportation, removal or reinstallation of defective High PointCabinetry products are not assumed by High Point Cabinetry under this Warranty.

HIGH POINT CABINETRY MAKES NO IMPLIED WARRANTIES OF MERCHANT-ABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. THESE AND ALLOTHER IMPLIED WARRANTIES ARE SPECIFICALLY DISCLAIMED. IN NOEVENT WILL HIGH POINT CABINETRY BE LIABLE FOR CONSEQUENTIAL,INDIRECT OR INCIDENTAL DAMAGES RESULTING FROM ANY CAUSE.

Some states do not allow limitations on how long an implied warranty lasts and somestates do not allow an exclusion or limitation of incidental or consequential damages,so the above limitations or exclusions may not apply to you. This warranty gives youspecific legal rights, and you may also have other rights which vary from state tostate.

High Point Cabinetry is a Division of Marsh Furniture Company

Page 3: Specification Catalog - Accent Building Products

INDEX

1.1 Walls2.1 Bases3.1 Talls4.1 Vanities5.2 Overlay Ends and Doors5.3 Hoods5.7 Wall Accessories5.9 Base Accessories5.12 Tall Accessories5.13 Fillers5.19 Moldings5.21 Decorative Accents5.26 Miscellaneous6.1 Sales Samples

INDEX0.1

High Point Cabinetry — Effective 03/07/2011

Page 4: Specification Catalog - Accent Building Products

TABLE OF CONTENTS AND ABBREVIATIONS

20 Door Wall Pager. Door Pager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.250, 45 . . . . . . . . Sales Samples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.264 Door Pager. Door Pager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.22FIB . . . . . . . . . Two Faced Island Base . . . . . . . . . . . . . . . . . . . . . 2.6

A

ACOR . . . . . . . . Acanthus Corbels . . . . . . . . . . . . . . . . . . . . . . . . . . 5.23APL . . . . . . . . . Apple Foot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.23AV . . . . . . . . . . . Arched Valance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.21

B

BAFFL. . . . . . . . Base Angled Filler - Fluted . . . . . . . . . . . . . . . . . 5.16BBP . . . . . . . . . Bead Board Panel . . . . . . . . . . . . . . . . . . . . . . . . . 5.25BC . . . . . . . . . . . Bookcase Cabinet . . . . . . . . . . . . . . . . . . . . . . 1.9, 5.7BCWN. . . . . . . . Beaded Crown Molding . . . . . . . . . . . . . . . . . . . . 5.20BEC. . . . . . . . . . Base End Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5BES . . . . . . . . . . Base End Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.6BF . . . . . . . . . . . Base Filler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.15BFB . . . . . . . . . Base Filler Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.13BFC . . . . . . . . . Base Fluted Column . . . . . . . . . . . . . . . . . . . . . . . 5.13BFFL . . . . . . . . . Base Filler - Fluted . . . . . . . . . . . . . . . . . . . . . . . . 5.16BM . . . . . . . . . . . Batten Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.19BPC . . . . . . . . . Base Profiled Column . . . . . . . . . . . . . . . . . . . . . . 5.14BSB . . . . . . . . . Burner Sink Base . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3BSF . . . . . . . . . . Base Sink Front. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7BTC . . . . . . . . . . Base Transitional Cabinet . . . . . . . . . . . . . . . . . . . 2.5

C

CAH. . . . . . . . . . Corner Appliance Hutch . . . . . . . . . . . . . . . . 1.10, 5.8CBF . . . . . . . . . . Corner Base Filler . . . . . . . . . . . . . . . . . . . . . . . . . 5.15CDU . . . . . . . . . Carousel Display Unit . . . . . . . . . . . . . . . . . . . . . . . 6.2CM. . . . . . . . . . . Cap Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.19CR . . . . . . . . . . . Corner Round Molding - Outside Corner . . . . . 5.19CS . . . . . . . . . . . Corner Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.9, 5.7CSF . . . . . . . . . . Corner Sink Front . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7CSTP. . . . . . . . . Corner Shelf Top Plate . . . . . . . . . . . . . . . . . . 1.9, 5.7CT . . . . . . . . . . . Cutlery Tray . . . . . . . . . . . . . . . . . . . . . . . . . . 2.9, 5.10CTEM . . . . . . . . Counter Top Edge Molding . . . . . . . . . . . . . . . . . 5.19CV . . . . . . . . . . . Cove Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.19CWC . . . . . . . . . Corner Wall Cabinet - Diagonal . . . . . . . . . . . . . . 1.6CWCGL . . . . . . Corner Wall Cabinet - Diagonal with

Glass Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.6CWCMD . . . . . . Corner Wall Cabinet - Diagonal with

Mullion Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.6CWF . . . . . . . . . Corner Wall Filler . . . . . . . . . . . . . . . . . . . . . . . . . . 5.15

D

DB . . . . . . . . . . . Drawer Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3DBP. . . . . . . . . . Drawer Base Pots & Pans . . . . . . . . . . . . . . . . . . . 2.3DCB. . . . . . . . . . Decorative Counter Bracket . . . . . . . . . . . . . . . . . 5.23DCK . . . . . . . . . Ductless Conversion Kit . . . . . . . . . . . . . . . . . . . . . 5.6DKBU . . . . . . . . Ductless Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.6DM. . . . . . . . . . . Dentil Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.20DMK . . . . . . . . . Door Mounting Kit . . . . . . . . . . . . . . . . . . . . . 2.9, 5.10DO . . . . . . . . . . . Desk Organizer . . . . . . . . . . . . . . . . . . . . . . . . 1.9, 5.7DWB . . . . . . . . . Double Waste Baskets . . . . . . . . . . . . . . . . . 2.9, 5.10DWE . . . . . . . . . Dishwasher End Panel . . . . . . . . . . . . . . . . 5.17, 5.18

E

ES . . . . . . . . . . End Skins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2EZCB . . . . . . . . Easy Reach Corner Base . . . . . . . . . . . . . . . . . . . . 2.5

F

FA . . . . . . . . . . . Furniture Aprons . . . . . . . . . . . . . . . . . . . . . . . . . . 5.21FF . . . . . . . . . . . Filler Strip - Laminate. . . . . . . . . . . . . . . . . . . . . . . 5.15FP . . . . . . . . . . . Finished Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.25FPC . . . . . . . . . . Finished Panel Crossgrain . . . . . . . . . . . . . . . . . . 5.25FS . . . . . . . . . . . Filler Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.15FSFL . . . . . . . . . Filler Strip - Fluted . . . . . . . . . . . . . . . . . . . . 5.16, 5.17FV . . . . . . . . . . . Frieze Valance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.21

G

GR . . . . . . . . . . Galley Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.19GRCL . . . . . . . . Grape Cluster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.22GRCOR . . . . . . Grape Corbel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.22

H

HS . . . . . . . . . . Heat Shields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.26

K

KC . . . . . . . . . . . Cultured Marble . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8

L

LB . . . . . . . . . . . Light Bar Trim Molding . . . . . . . . . . . . . . . . . . . . . 5.19LBM. . . . . . . . . . Individual Finish Box Samples . . . . . . . . . . . . . . . . 6.2LBCP. . . . . . . . . LeMans Corner Pull Out . . . . . . . . . . . . . . . 2.10, 5.11LCWN . . . . . . . Large Crown Molding with Heel . . . . . . . . . . . . . 5.20LES . . . . . . . . . . Left End Splash . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8LONLAYA . . . . Large Acanthus Onlay . . . . . . . . . . . . . . . . . . . . . 5.21LONLAYGR . . Large Grape Onlay . . . . . . . . . . . . . . . . . . . . . . . . 5.22LS . . . . . . . . . . . Loose Shelving . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.26LSCB. . . . . . . . . Lazy Susan Corner Base . . . . . . . . . . . . . . . . . . . . 2.4

M

MKC . . . . . . . . . Cultured Marble - 19! deep . . . . . . . . . . . . . . . . . . 4.8

O

OC . . . . . . . . . . . Oven Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4, 3.5ODK . . . . . . . . . Oven Drawer Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4ONLAYA3 . . . . Small Acanthus Ornament . . . . . . . . . . . . . . . . . . 5.21ONLAYA6 . . . . Large Acanthus Ornament . . . . . . . . . . . . . . . . . . 5.21OVDB . . . . . . . . Overlay Door - Base . . . . . . . . . . . . . . . . . . . . . . . . 5.2OVDUC. . . . . . . Overlay Door - Utility Cabinet . . . . . . . . . . . . . . . . 5.2OVDV . . . . . . . . Overlay Door - Vanity - Standard . . . . . . . . . . . . . 5.2OVDVBH . . . . . Overlay Door - Vanity - Base Height . . . . . . . . . . 5.2OVDW. . . . . . . . Overlay Door - Wall . . . . . . . . . . . . . . . . . . . . . . . . . 5.2

P

PB . . . . . . . . . . . Pantry Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2PBC. . . . . . . . . . Pantry Base Corner . . . . . . . . . . . . . . . . . . . . . . . . . 2.4PFT . . . . . . . . . Plain Full Turning . . . . . . . . . . . . . . . . . . . . . 5.23, 5.24PROD . . . . . . . . Pantry Roll Out, Double . . . . . . . . . . . . . . . . 3.6, 5.12PROS . . . . . . . . Pantry Roll Out Single . . . . . . . . . . . . . . . . . 3.6, 5.12PST . . . . . . . . . Split Turning End Post . . . . . . . . . . . . . . . . . . . . . 5.24PST30/42/84 . . Split Turning Plain Center . . . . . . . . . . . . . . . . . . 5.24

TABL

EO

FCO

NTEN

TS0.2

High Point Cabinetry — Effective 03/07/2011

Abbrev. Description Page Abbrev. Description Page

Page 5: Specification Catalog - Accent Building Products

TABLE OF CONTENTS AND ABBREVIATIONS

R

REP. . . . . . . . . . Refrigerator End Panel . . . . . . . . . . . . . . . . . . . . . 5.17RES. . . . . . . . . . Right End Splash . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8RFT . . . . . . . . . Reeded Full Turning . . . . . . . . . . . . . . . . . . . . . . . 5.24RH . . . . . . . . . . . Range Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3-5.6RHB. . . . . . . . . . Range Hood Blower . . . . . . . . . . . . . . . . . . . . . . . . 5.6RLR . . . . . . . . . Radius Light Rail Molding . . . . . . . . . . . . . . . . . . 5.20RLS . . . . . . . . . . Round Lazy Susan . . . . . . . . . . . . . . . . . . . . 1.10, 5.8RM. . . . . . . . . . . Rope Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.20ROS3 . . . . . . . . Rosette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.23RST30/42/84 . . Split Turning Reed Center . . . . . . . . . . . . . . . . . . 5.24RT . . . . . . . . . . . Roll Out Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.8, 5.9RTP . . . . . . . . . . Range Toe Plate . . . . . . . . . . . . . . . . . . . . . . . . . . 5.26RV . . . . . . . . . . . Valance - Profiled Edge . . . . . . . . . . . . . . . . . . . . . 5.21RW . . . . . . . . . . Refrigerator Wall Cabinets . . . . . . . . . . . . . . . . . . . 1.5

S

SBM . . . . . . . . . Shoe Base Molding . . . . . . . . . . . . . . . . . . . . . . . . 5.20SBX . . . . . . . . . . Sample Box Only . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2SBXC . . . . . . . . Complete Sample Box of Finishes . . . . . . . . . . . . 6.2SCMC . . . . . . . . Shaker Crown Molding. . . . . . . . . . . . . . . . . . . . . . 5.20SCR . . . . . . . . . Small Outside Corner . . . . . . . . . . . . . . . . . . . . . . 5.19SF . . . . . . . . . . . Soffit Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.19SFB . . . . . . . . . Scribe Base Filler . . . . . . . . . . . . . . . . . . . . . . . . . 5.17SFE . . . . . . . . . Sink Front End Panel . . . . . . . . . . . . . . . . . . . . . . 5.18SFF . . . . . . . . . Sink Front Floors . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7SFW . . . . . . . . . Scribe Wall Filler . . . . . . . . . . . . . . . . . . . . . . . . . . 5.17SH . . . . . . . . . . Stemware Holder . . . . . . . . . . . . . . . . . . . . . . 1.10, 5.8SM . . . . . . . . . . Scribe Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.19SMC . . . . . . . . . Sample Molding Chain . . . . . . . . . . . . . . . . . . . . . . . 6.2SONLAYGR . . . Small Grape Onlay . . . . . . . . . . . . . . . . . . . . . . . . 5.22SPDBX . . . . . . Spice Drawer Box . . . . . . . . . . . . . . . . . . . . . 1.10, 5.8SPWC . . . . . . . Spice Drawer Cabinet/Wine Cube . . . . . . . 1.10, 5.8SSCV . . . . . . . . Solid Scalloped Valance Wood . . . . . . . . . . . . . . 5.21SWB . . . . . . . . . Single Waste Basket . . . . . . . . . . . . . . . . . . . 2.9, 5.10

T

TB . . . . . . . . . . . Tray Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2TBSM . . . . . . . . Triple Bead Stacked Molding . . . . . . . . . . . . . . . . 5.20TF . . . . . . . . . . . Tall Filler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.16TFB . . . . . . . . . Tall Filler Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.13TFC . . . . . . . . . Tall Fluted Column . . . . . . . . . . . . . . . . . . . . . . . . . 5.14TLG . . . . . . . . . 2-Sided Taper Leg . . . . . . . . . . . . . . . . . . . . . . . . . 5.23TLL . . . . . . . . . . Tulip Foot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.23TP . . . . . . . . . . . Toe Plate cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.26TPC . . . . . . . . . . Tall Profiled Column . . . . . . . . . . . . . . . . . . . . . . . . 5.14TPC-Black . . . . Toe Plate Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.26TPC-White . . . . Toe Plate Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.26TUK . . . . . . . . . Touch-up Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.26

U

UC . . . . . . . . . . Utility Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2-3.3UCWN . . . . . . . Universal Crown Molding . . . . . . . . . . . . . . . . . . . 5.20UC3S . . . . . . . . Utility Cabinet - Three-Shelf Kit . . . . . . . . . 3.6, 5.12

V

VBF . . . . . . . . . . Vanity Base Filler . . . . . . . . . . . . . . . . . . . . . . . . . . 5.16VBFFL . . . . . . . Vanity Base Filler - Fluted . . . . . . . . . . . . . . . . . . 5.17

VD . . . . . . . . . . Vanity Drawer Base . . . . . . . . . . . . . . . . . . . . . . . . . 4.5VDBH . . . . . . . . Vanity Drawer - Base Height . . . . . . . . . . . . . . . . . 4.6VDL . . . . . . . . . Vanity Drawer Lavatory . . . . . . . . . . . . . . 4.3, 4.4, 4.5VDLBH . . . . . . . Vanity Drawer Lavatory -

Base Height . . . . . . . . . . . . . . . . . . . . . . .4.3, 4.4, 4.5VDU . . . . . . . . . Vanity Drawer Unit . . . . . . . . . . . . . . . . . . . . . . 4.7, 4.8VFB . . . . . . . . . Vanity Filler Box . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.13VFBBH . . . . . . . Vanity Filler Box - Base Height . . . . . . . . . . . . . . 5.13VFC . . . . . . . . . Vanity Fluted Column . . . . . . . . . . . . . . . . . . . . . . 5.14VFCBH . . . . . . Vanity Fluted Column - Base Height . . . . . . . . . 5.14VFD . . . . . . . . . Vanity File Drawer . . . . . . . . . . . . . . . . . . . . . . 4.6, 4.7VL . . . . . . . . . . . Vanity Lavatory . . . . . . . . . . . . . . . . . . . . . . . . . 4.2, 4.6VLF . . . . . . . . . . Vanity Lavatory Front . . . . . . . . . . . . . . . . . . . . . . . . 4.7VLBH . . . . . . . . Vanity Lavatory - Base Height . . . . . . . . . . . . 4.2, 4.3VLEG . . . . . . . . Vanity Desk Leg . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8VPC . . . . . . . . . Vanity Profiled Column. . . . . . . . . . . . . . . . . . . . . . 5.14VPCBH . . . . . . . Vanity Profiled Column - Base Height. . . . . . . . . 5.14VSD . . . . . . . . . Vanity Side Drawer . . . . . . . . . . . . . . . . . . . . . . . . . 4.4VSDBH . . . . . . Vanity Side Drawer - Base Height . . . . . . . . . . . . 4.4VWS . . . . . . . . . Vanity Wall Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . 4.7

W

WC . . . . . . . . . . Wall Cabinet . . . . . . . . . . . . . . . . . . . . . . . . 1.2-1.4, 1.5WCC . . . . . . . . Wall Corner Cabinet . . . . . . . . . . . . . . . . . . . . . 1.5-1.6WCGL . . . . . . . Wall Cabinet with Glass Doors . . . . . . . . . . . . 1.3-1.4WCM . . . . . . . . Wall Microwave Cabinet . . . . . . . . . . . . . . . . . . . . . 1.8WCMD . . . . . . . Wall Cabinet with Mullion Doors . . . . . . 1.2, 1.3-1.4WCMW . . . . . . Wall Cabinet with Microwave Cabinet . . . . . . . . . 1.8WCPRE . . . . . . Wall Cabinet with Plate Rack . . . . . . . . . . . . . . . . 1.4WCR . . . . . . . . Outside Corner Molding - Laminate . . . . . . . . . . 5.19WCWN . . . . . . . Crown Molding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.20WDCT . . . . . . . Wood Cutlery Tray . . . . . . . . . . . . . . . . . . . . 2.10, 5.11WDDWB . . . . . . Double Waste Baskets. . . . . . . . . . . . . . . . . . 2.9, 5.10WDSI. . . . . . . . . Spice Drawer Insert . . . . . . . . . . . . . . . . . . . 2.10, 5.11WDSWB . . . . . . Single Waste Basket . . . . . . . . . . . . . . . . . . . 2.9, 5.10WDUT . . . . . . . . Wood Utility Tray . . . . . . . . . . . . . . . . . . . . . . 2.10, 5.11WEA . . . . . . . . . Wall End Angled Cabinet - Manhattan . . . . . . . . . 1.7WEC . . . . . . . . . Wall End Angled Cabinet . . . . . . . . . . . . . . . . . . . . 1.7WECGL . . . . . . Wall End Angled Cabinet with

Glass Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.7WFB . . . . . . . . . Wall Filler Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.13WFC . . . . . . . . . Wall Fluted Column . . . . . . . . . . . . . . . . . . . . . . . . 5.13WLB . . . . . . . . . Light Bar Trim Molding . . . . . . . . . . . . . . . . . . . . . 5.19WPC . . . . . . . . . Wall Profiled Column . . . . . . . . . . . . . . . . . . . . . . . 5.14WR . . . . . . . . . . Wine Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.10, 5.8WRC . . . . . . . . Radius Corner Molding . . . . . . . . . . . . . . . . . . . . . 5.19WRCE . . . . . . . Lattice Wine Rack Cabinet . . . . . . . . . . . . . . . . . . . 1.4WRT . . . . . . . . . Wood Roll Out Tray . . . . . . . . . . . . . . . . . . . . . 2.8, 5.9WSM . . . . . . . . . Cap Molding - Laminate . . . . . . . . . . . . . . . . . . . . 5.19WST . . . . . . . . . Scribe Trim - Laminate . . . . . . . . . . . . . . . . . . . . . 5.19WSV . . . . . . . . . Valance - Laminate. . . . . . . . . . . . . . . . . . . . . . . . . 5.21

Aerosol Spray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.26Quart Stain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.26Dealer Binder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2Mini Bases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2Cabinet Modifications . . . . . . . . . . . . . . . . . . . . . . . 0.14

TABLEO

FCO

NTENTS0.3

High Point Cabinetry — Effective 03/07/2011

Abbrev. Description Page Abbrev. Description Page

Page 6: Specification Catalog - Accent Building Products

TABLE OF CONTENTS BY SECTION

WALL CABINETSWALLS

WC. . . . . . . . . . . Wall Cabinet . . . . . . . . . . . . . . . . . . . . . 1.2-1.4, 1.5WCGL . . . . . . . Wall Cabinet with Glass Doors . . . . . . . . . 1.3-1.4WCMD . . . . . . . Wall Cabinet with Mullion Doors . . . . 1.2, 1.3-1.4WCPRE . . . . . . Wall Cabinet with Plate Rack . . . . . . . . . . . . . . . 1.4WEA . . . . . . . . . Wall End Angled Cabinet - Manhattan . . . . . . . 1.7WEC . . . . . . . . . Wall End Angled Cabinet . . . . . . . . . . . . . . . . . . 1.7WECGL . . . . . . Wall End Angled Cabinet with

Glass Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.7WRCE. . . . . . . . Lattice Wine Rack Cabinet . . . . . . . . . . . . . . . . . 1.4

CORNER WALLSCWC . . . . . . . . . Corner Wall Cabinet - Diagonal . . . . . . . . . . . . . 1.6CWCGL . . . . . . Corner Wall Cabinet - Diagonal with

Glass Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.6CWCMD . . . . . . Corner Wall Cabinet - Diagonal with

Mullion Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.6WCC . . . . . . . . . Wall Corner Cabinet . . . . . . . . . . . . . . . . . . . 1.5-1.6

MICROWAVE WALLSWCM . . . . . . . . . Wall Microwave Cabinet . . . . . . . . . . . . . . . . . . . 1.8WCMW . . . . . . . Wall Cabinet with Microwave Cabinet . . . . . . . 1.8

REFRIGERATOR WALLSRW. . . . . . . . . . . Refrigerator Wall Cabinets . . . . . . . . . . . . . . . . . 1.5REP. . . . . . . . . . Refrigerator End Panel . . . . . . . . . . . . . . . . . . . 5.17

WALL ACCESSORIESBC . . . . . . . . . . . Bookcase Cabinet. . . . . . . . . . . . . . . . . . . . . 1.9, 5.7CAH. . . . . . . . . . Corner Appliance Hutch . . . . . . . . . . . . . . 1.10, 5.8CS . . . . . . . . . . . Corner Shelf. . . . . . . . . . . . . . . . . . . . . . . . . . 1.9, 5.7CSTP. . . . . . . . . Corner Shelf Top Plate . . . . . . . . . . . . . . . . 1.9, 5.7DO . . . . . . . . . . . Desk Organizer . . . . . . . . . . . . . . . . . . . . . . . 1.9, 5.7SH . . . . . . . . . . . Stemware Holder . . . . . . . . . . . . . . . . . . . . 1.10, 5.8WR. . . . . . . . . . . Wine Rack . . . . . . . . . . . . . . . . . . . . . . . . . . 1.10, 5.8SPDBX . . . . . . . Spice Drawer Box. . . . . . . . . . . . . . . . . . . . 1.10, 5.8SPWC . . . . . . . . Spice Drawer Cabinet/Wine Cube. . . . . . 1.10, 5.8RLS . . . . . . . . . . Round Lazy Susan. . . . . . . . . . . . . . . . . . . 1.10, 5.8

RANGE HOODSRH . . . . . . . . . . . Range Hood . . . . . . . . . . . . . . . . . . . . . . . . . 5.3-5.6RHB. . . . . . . . . . Range Hood Blower . . . . . . . . . . . . . . . . . . . . . . . 5.6DCK. . . . . . . . . . Ductless Conversion Kit . . . . . . . . . . . . . . . . . . . 5.6DKBU . . . . . . . . Ductless Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.6

BASE CABINETSBASES

TB . . . . . . . . . . . Tray Base. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2BEC. . . . . . . . . . Base End Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . 2.5BES . . . . . . . . . . Base End Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . 2.6BSB . . . . . . . . . . Burner Sink Base . . . . . . . . . . . . . . . . . . . . . . . . . 2.3BSF . . . . . . . . . . Base Sink Front . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7BTC . . . . . . . . . . Base Transitional Cabinet . . . . . . . . . . . . . . . . . . 2.5DB . . . . . . . . . . . Drawer Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3DBP. . . . . . . . . . Drawer Base Pots & Pans . . . . . . . . . . . . . . . . . 2.3PB . . . . . . . . . . . Pantry Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2SFF . . . . . . . . . . Sink Front Floors . . . . . . . . . . . . . . . . . . . . . . . . . 2.7

CORNER BASESCSF . . . . . . . . . . Corner Sink Front . . . . . . . . . . . . . . . . . . . . . . . . . 2.7EZCB. . . . . . . . . Easy Reach Corner Base . . . . . . . . . . . . . . . . . . 2.5LSCB. . . . . . . . . Lazy Susan Corner Base . . . . . . . . . . . . . . . . . . 2.4PBC. . . . . . . . . . Pantry Base Corner . . . . . . . . . . . . . . . . . . . . . . . 2.4

ISLAND BASES2FIB. . . . . . . . . . Two Faced Island Base . . . . . . . . . . . . . . . . . . . . 2.6

BASE ACCESSORIESSWB . . . . . . . . . Single Waste Basket . . . . . . . . . . . . . . . . . 2.9, 5.10WDSWB . . . . . . Wood Single Waste Basket . . . . . . . . . . . 2.9, 5.10DWB . . . . . . . . . Double Waste Baskets . . . . . . . . . . . . . . . 2.9, 5.10WDDWB . . . . . . Wood Double Waste Baskets. . . . . . . . . . 2.9, 5.10DMK . . . . . . . . . Door Mounting Kit - Waste Basket . . . . . 2.9, 5.10CT . . . . . . . . . . . Cutlery Tray . . . . . . . . . . . . . . . . . . . . . . . . . 2.9, 5.10WDCT . . . . . . . Wood Cutlery Tray . . . . . . . . . . . . . . . . . . 2.10, 5.11RT . . . . . . . . . . . Roll Out Tray . . . . . . . . . . . . . . . . . . . . . . . . . 2.8, 5.9WRT . . . . . . . . . Wood Roll Out Tray . . . . . . . . . . . . . . . . . . . 2.8, 5.9WDUT . . . . . . . . Wood Utility Tray . . . . . . . . . . . . . . . . . . . 2.10, 5.11WDSI. . . . . . . . . Spice Drawer Insert . . . . . . . . . . . . . . . . . 2.10, 5.11LBCP. . . . . . . . . LeMans Corner Pull Out . . . . . . . . . . . . . 2.10, 5.11

TALL CABINETSOVEN CABINETS

OC . . . . . . . . . . . Oven Cabinet . . . . . . . . . . . . . . . . . . . . . . . . 3.4, 3.5ODK . . . . . . . . . Oven Drawer Kit . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4

UTILITY CABINETSUC . . . . . . . . . . . Utility Cabinet . . . . . . . . . . . . . . . . . . . . . . . . 3.2-3.3

TALL ACCESSORIESPROD . . . . . . . . Pantry Roll Out, Double . . . . . . . . . . . . . . 3.6, 5.12PROS . . . . . . . . Pantry Roll Out Single . . . . . . . . . . . . . . . 3.6, 5.12UC3S. . . . . . . . . Utility Cabinet Three Shelf Kit . . . . . . . . . 3.6, 5.12

VANITY CABINETSWALLS

VWS . . . . . . . . . Vanity Wall Cabinet . . . . . . . . . . . . . . . . . . . . . . . 4.7

BASESVD . . . . . . . . . . . Vanity Drawer Base . . . . . . . . . . . . . . . . . . . . . . . 4.5VDBH . . . . . . . . Vanity Drawer - Base Height . . . . . . . . . . . . . . . 4.6VFD . . . . . . . . . . Vanity File Drawer . . . . . . . . . . . . . . . . . . . . 4.6, 4.7VDU. . . . . . . . . . Vanity Drawer Unit . . . . . . . . . . . . . . . . . . . . 4.7, 4.8VLEG . . . . . . . . Vanity Desk Leg . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8

SINKSVDL . . . . . . . . . . Vanity Drawer Lavatory . . . . . . . . . . . 4.3, 4.4, 4.5VDLBH . . . . . . . Vanity Drawer Lavatory -

Base Height . . . . . . . . . . . . . . . . . . . . . 4.3, 4.4, 4.5VSD. . . . . . . . . . Vanity Side Drawer. . . . . . . . . . . . . . . . . . . . . . . . 4.4VSDBH . . . . . . . Vanity Side Drawer - Base Height. . . . . . . . . . . 4.4VL . . . . . . . . . . . Vanity Lavatory . . . . . . . . . . . . . . . . . . . . . . 4.2, 4.6VLBH. . . . . . . . . Vanity Lavatory - Base Height . . . . . . . . . . 4.2, 4.3VLF . . . . . . . . . . Vanity Lavatory Front . . . . . . . . . . . . . . . . . . . . . . 4.7

VANITY TOPSKC . . . . . . . . . . . Cultured Marble. . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8MKC . . . . . . . . . Cultured Marble - 19” deep. . . . . . . . . . . . . . . . . 4.8LES . . . . . . . . . . Left End Splash. . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8RES. . . . . . . . . . Right End Splash . . . . . . . . . . . . . . . . . . . . . . . . . 4.8

DECORATIVE DOORS AND ENDSOVDW. . . . . . . . Overlay Door - Wall . . . . . . . . . . . . . . . . . . . . . . . 5.2OVDB . . . . . . . . Overlay Door - Base . . . . . . . . . . . . . . . . . . . . . . 5.2OVDUC. . . . . . . Overlay Door - Utility Cabinet. . . . . . . . . . . . . . . 5.2OVDV . . . . . . . . Overlay Door - Vanity - Standard . . . . . . . . . . . 5.2OVDVBH . . . . . Overlay Door - Vanity - Base Height. . . . . . . . . 5.2ES . . . . . . . . . . . End Skins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2

TABL

EO

FCO

NTEN

TS0.4

High Point Cabinetry — Effective 03/07/2011

Page 7: Specification Catalog - Accent Building Products

TABLE OF CONTENTS BY SECTION

FILLERSWALL FILLERS

CWF . . . . . . . . . Corner Wall Filler . . . . . . . . . . . . . . . . . . . . . . . . 5.15WFB . . . . . . . . . Wall Filler Box . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.13FS . . . . . . . . . . . Filler Strip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.15FSFL . . . . . . . . . Filler Strip - Fluted . . . . . . . . . . . . . . . . . . . . . . . 5.16FF . . . . . . . . . . . Filler Strip - Laminate . . . . . . . . . . . . . . . . . . . . 5.15SFW . . . . . . . . . Scribe Wall Filler. . . . . . . . . . . . . . . . . . . . . . . . . 5.17WFC . . . . . . . . . Wall Fluted Column . . . . . . . . . . . . . . . . . . . . . . 5.13WPC . . . . . . . . . Wall Profiled Column . . . . . . . . . . . . . . . . . . . . . 5.14

BASE FILLERSBF . . . . . . . . . . . Base Filler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.15BFB . . . . . . . . . . Base Filler Box . . . . . . . . . . . . . . . . . . . . . . . . . . 5.13BFC . . . . . . . . . . Base Fluted Column . . . . . . . . . . . . . . . . . . . . . 5.13BFFL . . . . . . . . . Base Filler - Fluted. . . . . . . . . . . . . . . . . . . . . . . 5.16BAFFL. . . . . . . . Base Angled Filler - Fluted . . . . . . . . . . . . . . . . 5.16BPC. . . . . . . . . . Base Profiled Column . . . . . . . . . . . . . . . . . . . . 5.14SFB . . . . . . . . . . Scribe Base Filler . . . . . . . . . . . . . . . . . . . . . . . . 5.17CBF . . . . . . . . . . Corner Base Filler . . . . . . . . . . . . . . . . . . . . . . . 5.15

TALL FILLERSTF . . . . . . . . . . . Tall Filler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.16TFB . . . . . . . . . . Tall Filler Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.13TFC . . . . . . . . . . Tall Fluted Column . . . . . . . . . . . . . . . . . . . . . . . 5.14TPC . . . . . . . . . . Tall Profiled Column. . . . . . . . . . . . . . . . . . . . . . 5.14

VANITY FILLERSVBF . . . . . . . . . . Vanity Base Filler . . . . . . . . . . . . . . . . . . . . . . . . 5.16VBFFL. . . . . . . . Vanity Base Filler - Fluted. . . . . . . . . . . . . . . . . 5.17VFB . . . . . . . . . . Vanity Filler Box . . . . . . . . . . . . . . . . . . . . . . . . . 5.13VFBBH . . . . . . . Vanity Filler Box - Base Height . . . . . . . . . . . . 5.13VFC . . . . . . . . . . Vanity Fluted Column. . . . . . . . . . . . . . . . . . . . . 5.14VFCBH . . . . . . . Vanity Fluted Column - Base Height. . . . . . . . 5.14VPC. . . . . . . . . . Vanity Profiled Column . . . . . . . . . . . . . . . . . . . 5.14VPCBH . . . . . . . Vanity Profiled Column - Base Height . . . . . . 5.14

MOLDINGSBCWN. . . . . . . . Beaded Crown Molding . . . . . . . . . . . . . . . . . . . 5.20BM . . . . . . . . . . . Batten Molding . . . . . . . . . . . . . . . . . . . . . . . . . . 5.19CM. . . . . . . . . . . Cap Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.19CR . . . . . . . . . . . Corner Round Molding - Outside Corner . . . . 5.19CTEM . . . . . . . . Counter Top Edge Molding . . . . . . . . . . . . . . . . 5.19CV . . . . . . . . . . . Cove Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.19DM. . . . . . . . . . . Dentil Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.20GR . . . . . . . . . . . Galley Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.19LB . . . . . . . . . . . Light Bar Trim Molding . . . . . . . . . . . . . . . . . . . 5.19LCWN . . . . . . . . Large Crown Molding with Heel. . . . . . . . . . . . 5.20RLR . . . . . . . . . . Radius Light Rail Molding . . . . . . . . . . . . . . . . . 5.20RM. . . . . . . . . . . Rope Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.20SBM . . . . . . . . . Shoe Base Molding . . . . . . . . . . . . . . . . . . . . . . 5.20SCMC . . . . . . . . Shaker Crown Molding . . . . . . . . . . . . . . . . . . . 5.20SCR. . . . . . . . . . Small Outside Corner . . . . . . . . . . . . . . . . . . . . 5.19SF . . . . . . . . . . . Soffit Molding. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.19SM . . . . . . . . . . . Scribe Molding . . . . . . . . . . . . . . . . . . . . . . . . . . 5.19TBSM . . . . . . . . Triple Bead Stacked Molding . . . . . . . . . . . . . . 5.20UCWN. . . . . . . . Universal Crown Molding . . . . . . . . . . . . . . . . . 5.20WCWN . . . . . . . Crown Molding . . . . . . . . . . . . . . . . . . . . . . . . . . 5.20WCR . . . . . . . . . Outside Corner Molding - Laminate . . . . . . . . 5.19

WLB . . . . . . . . . Light Bar Trim Molding . . . . . . . . . . . . . . . . . . . 5.19WRC . . . . . . . . . Radius Corner Molding . . . . . . . . . . . . . . . . . . . 5.19WSM . . . . . . . . . Cap Molding - Laminate . . . . . . . . . . . . . . . . . . 5.19WST . . . . . . . . . Scribe Trim - Laminate . . . . . . . . . . . . . . . . . . . 5.19

ACCESSORIESACOR . . . . . . . . Acanthus Corbels . . . . . . . . . . . . . . . . . . . . . . . . 5.23APL . . . . . . . . . . Apple Foot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.23AV . . . . . . . . . . . Arched Valance. . . . . . . . . . . . . . . . . . . . . . . . . . 5.21BBP . . . . . . . . . . Bead Board Panel . . . . . . . . . . . . . . . . . . . . . . . 5.25DCB. . . . . . . . . . Decorative Counter Bracket . . . . . . . . . . . . . . . 5.23DWE . . . . . . . . . Dishwasher End Panel . . . . . . . . . . . . . . 5.17, 5.18FA . . . . . . . . . . . Furniture Aprons . . . . . . . . . . . . . . . . . . . . . . . . . 5.21FP . . . . . . . . . . . Finished Panel . . . . . . . . . . . . . . . . . . . . . . . . . . 5.25FPC . . . . . . . . . . Finished Panel Crossgrain . . . . . . . . . . . . . . . . 5.25FV . . . . . . . . . . . Frieze Valance . . . . . . . . . . . . . . . . . . . . . . . . . . 5.21GRCL . . . . . . . . Grape Cluster . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.22GRCOR . . . . . . Grape Corbel. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.22HS . . . . . . . . . . . Heat Shields . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.26LONLAYA . . . . . Large Acanthus Onlay . . . . . . . . . . . . . . . . . . . . 5.21LONLAYGR . . . Large Grape Onlay. . . . . . . . . . . . . . . . . . . . . . . 5.22LS . . . . . . . . . . . Loose Shelving . . . . . . . . . . . . . . . . . . . . . . . . . . 5.26ONLAYA6 . . . . . Large Acanthus Ornament . . . . . . . . . . . . . . . . 5.21ONLAYA3 . . . . . Small Acanthus Ornament . . . . . . . . . . . . . . . . 5.21PFT . . . . . . . . . . Plain Full Turning . . . . . . . . . . . . . . . . . . . 5.23, 5.24PST . . . . . . . . . . Split Turning End Post. . . . . . . . . . . . . . . . . . . . 5.24PST30/42/84 . . Split Turning Plain Center . . . . . . . . . . . . . . . . . 5.24ROS3 . . . . . . . . Rosette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.23RST30/42/84 . . Split Turning Reed Center . . . . . . . . . . . . . . . . 5.24RFT . . . . . . . . . . Reeded Full Turning. . . . . . . . . . . . . . . . . . . . . . 5.24RTP . . . . . . . . . . Range Toe Plate . . . . . . . . . . . . . . . . . . . . . . . . . 5.26RV . . . . . . . . . . . Valance - Profiled Edge. . . . . . . . . . . . . . . . . . . 5.21SFE . . . . . . . . . . Sink Front End Panel. . . . . . . . . . . . . . . . . . . . . 5.18SONLAYGR . . . Small Grape Onlay. . . . . . . . . . . . . . . . . . . . . . . 5.22SSCV . . . . . . . . Solid Scalloped Valance Wood . . . . . . . . . . . . 5.21TLG . . . . . . . . . . 2-Sided Taper Leg . . . . . . . . . . . . . . . . . . . . . . . 5.23TLL . . . . . . . . . . Tulip Foot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.23TP . . . . . . . . . . . Toe Plate cover . . . . . . . . . . . . . . . . . . . . . . . . . . 5.26TPC-Black . . . . Toe Plate Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.26TPC-White . . . . Toe Plate Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.26WSV . . . . . . . . . Valance - Laminate . . . . . . . . . . . . . . . . . . . . . . 5.21

MISCELLANEOUS20 Door Wall Pager. Door Pager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.250, 45 . . . . . . . . Sales Samples . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.264 Door Pager. Door Pager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2CDU. . . . . . . . . . Carousel Display Unit . . . . . . . . . . . . . . . . . . . . . 6.2LBM . . . . . . . . . Individual Finish Box Sample . . . . . . . . . . . . . . . 6.2SBX . . . . . . . . . . Sample Box Only . . . . . . . . . . . . . . . . . . . . . . . . . 6.2SBXC . . . . . . . . Complete Sample Box of Finishes . . . . . . . . . . 6.2SMC . . . . . . . . . Sample Molding Chain. . . . . . . . . . . . . . . . . . . . . 6.2TUK . . . . . . . . . . Touch-up Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.26Aerosol Spray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.26Quart Stain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.26Dealer Binder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2Mini Bases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2

TABLEO

FCO

NTENTS0.5

High Point Cabinetry — Effective 03/07/2011

Page 8: Specification Catalog - Accent Building Products

CABINET REFERENCES

CASCADE*White• Frameless construction• 5/8! thick white melamine

slab door• Full overlay• Concealed hinges

Drawers• 5/8! thick flat drawer head• Metal sides with built-in

side guides with two wooddrawer options

• Pulls required

DAKOTA*White• Frameless construction• 3/4! thick door• Full overlay• Square corners• Raised center panel• Thermofoil surface• Concealed hinges

Drawers• 3/4! thick face• Raised center panel• Thermofoil surface• Metal sides with built-in

side guides with two wooddrawer options

• Pulls required

GEORGETOWN* and GEORGETOWN ARCH*White• Frameless construction• 3/4! thick door• Full overlay• Rounded corners• Raised center panel• Raised center panel with

Arch on upper wallcabinets

• Not available on bases• Thermofoil surface• Concealed hinges

Drawers• 3/4! thick face• Raised center panel• Thermofoil surface• Metal sides with built-in

side guides with two wooddrawer options

• Pulls required

DOO

RSTYLES

0.7

High Point Cabinetry — Effective 03/07/2011

* White lines have finished ends as standard

Page 9: Specification Catalog - Accent Building Products

CABINET REFERENCES

MISSIONMaple• Frameless construction• 3/4! thick solid maple door

frame, mortise and tenon• Full overlay• Veneered recessed center

panel

Drawers• Slab 3/4! thick drawer head• Metal sides with built-in

side guides with two wooddrawer options

• Pulls required

ROSE HILLCherry• Frameless construction• 3/4! thick solid cherry wood

door frame• Full overlay, mortise and

tenon door• Raised veneer center panel• Concealed hinges

Drawers• Profiled 3/4! thick slab

drawer head• Metal sides with built-in

side guides with two wooddrawer options

• Pulls required

SHAKERMaple• Frameless construction• 3/4! thick solid maple door

frame, mortise and tenon• Full overlay• Veneered center panel

recessed in traditionalShaker style

Drawers• 5-piece drawer head• 3/4! thick face frame• Metal sides with built-in

side guides with two wooddrawer options

• Pulls required

WINDSORMaple• Frameless construction• 3/4! thick solid maple door

frame• Full overlay, mitered doors• Raised veneer center panel• Concealed hinges

Drawers• 5-piece drawer head• 3/4! thick frame• Flat veneer center panel• Metal sides with built-in

side guides with two wooddrawer options

• Pulls required

DOO

RST

YLES

0.8

High Point Cabinetry — Effective 03/07/2011

* White lines have finished ends as standard

Page 10: Specification Catalog - Accent Building Products

SPECIES AND FINISH AVAILABILITY CHART

Caf

e

Cor

dova

n

Esp

ress

o

Ivor

y

Nat

ural

Ony

x

Sie

nna

Tusc

any

Whe

at

Whi

te

* Glaze Available

Door StylePrice

Column Wood Specie

Cascade 1 Melamine "/

Dakota 3 Thermofoil "/

Georgetown 2 Thermofoil "/

Georgetown Arch 2 Thermofoil "/

Manhattan 7 Maple • • • • • • • • •

Manhattan 8 Cherry • • • • • •

Mission 4 Maple • • • • • • • • •

Rosehill* 6 Cherry • • • • • •

Shaker 4 Maple • • • • • • • • •

Windsor* 5 Maple • • • • • • • • •

Note: For Ivory - Ends will be natural painted ivory with a maple natural interior.

Available:"/ No Glaze

Glaze Type:• Hand Wiped

Glazes Available:AlabasterCaramelChocolate

WO

OD

INFO

RMAT

ION

0.10

High Point Cabinetry — Effective 03/07/2011

Page 11: Specification Catalog - Accent Building Products

WOOD SPECIES INFORMATION

Marsh Furniture Company offers both solidhardwoods and hardwood veneers in ourcabinetry. These natural materials have inherentcharacteristics such as varying grain pattern, smallmineral streaks, knots, and slight color variations.Because of this, our quality standards establishtolerance ranges for matching the wood.

These variations are what create the uniquenatural beauty of each piece. Additionally,exposure to sunlight, smoke, and other chemicalagents can cause wood colors to change overtime. You are urged to make final selection ofspecie and finish from a full size door sample.

Cherry is a moderately hard wood, heavy and strong. Itis generally a straight grained, uniformly textured woodcharacterized by its red undertones. Given that, it mayrange in color from a light to dark reddish brownheartwood with tones from greenish to white sapwood.There is also a natural occurrence of small knots, pitchpockets or wormholes in the surface of the wood.Cherry is well known for its response to artificial andnatural light sources, developing a rich and lustrouspatina in the colors noted above. These variations areoften quite visible with natural or light finishes whileappearing less on darker stains, shielding the woodfrom various light sources.

Maple is a hard and dense wood with a close grain thatis relatively subtle in appearance. The grain pattern mayvary from a tight vertical pattern to a wild arch-shape.The color range runs from white to yellow and brown.Marsh is very selective in this color range, ensuring thebrown portion to have a faint brown tint. Inherently,there are fine honey-colored mineral and sugar streaks.Maple will react to both natural and artificial lightsources, taking on a slightly subdued patina. When alight finish is applied, these variations are visible andshould not be considered defects.

Oak is an extremely hard wood with an open grainpattern. The pattern may vary from a tight to widepattern with a coarse texture. In oak’s natural state,colors may range from brownish with a red tinge to alight yellow. When a light finish is applied, thesevariations are visible and should not be considered adefect.

Birch is a medium-hard wood with plain and closedgrain. The grain is often characterized as a curly orwavy pattern. It is predominantly a light yellow woodthat takes stain very well. When a light finish is appliedthese variations may be visible and should not beconsidered a defect. When a dark stain is applied thewavy and curly grain absorbs stain and reflects light insuch a manner as to enhance the natural characteristicsof the species and should not be considered a defect.

Thermofoil is Medium Density Fiberboard (MDF)covered with a durable thermofoil laminate. The maplewood frame is painted with a white paint to closelymatch the laminate. You may notice some small seamsin the paint at the joints of the cabinetry face frame dueto expansion and contraction of the wood. This will notaffect the integrity of the cabinet or the finish.

Painted Wood differs from standard finishes. Wood products expand and contract due to changes in climaticconditions. Some of the characteristics that are common and acceptable aspects of painted wood includefinish breaks, slight recesses, and seam lines at stile, rail, and panel joints. Joint separation may be moreapparent on mitered doors; therefore, opaque finishes are not recommended for use in environments of highhumidity. Since seam lines and variations are normal characteristics of opaque finishes, they will not beconsidered reason for product replacement.

You may be required to sign a FINISH WAIVER FORM when ordering a painted product. Neither Marsh Furniture noryour Marsh dealer can be responsible for these conditions.

WO

OD

INFORM

ATION

0.11

High Point Cabinetry — Effective 03/07/2011

Page 12: Specification Catalog - Accent Building Products

CABINET SPECIFICATIONS

Will refer to:1. Cascade, Georgetown, Georgetown Arch, Dakota, Shaker, Mission, Windsor, and Rosehill2. Manhattan

A Doors (1,2)

• Solid wood stiles and rails

• Wood veneer door panels

• Thermofoil Medium Density Fiberboard (MDF) doorselections

• Laminate door selections

B End Panels (1,2)

• Constructed of 5/8! industrial grade particleboard

• The exterior and interior of white door styles are whitemelamine

• The exterior and interior will be natural maplemelamine on all wood lines

Top and Bottom Panels for Walls

• (1) Top and bottom panels are 3/4! industrial gradeparticleboard

• (2) Top and bottom panels are 5/8! industrial gradeparticleboard

• Panels are PVC edgebanded to match exterior ofcabinet

Bottom Panels for Bases (1,2)

• Bottom panels are 5/8! industrial grade particleboard

Back Panels for Walls (1,2)

• Back panels are 1/2! industrial grade particleboard

• Rear exterior is unfinished

Back Panels for Bases

• (1) Back panels are 1/4! industrial gradeparticleboard, melamine clad on one side

• (2) Back panels are 1/2! industrial gradeparticleboard melamine

• Rear exterior is unfinished

C Shelves (1,2)

• Shelves are constructed of 5/8! industrial gradeparticleboard for cabinets 24! high or taller

• Shelves are constructed of 3/4! industrial gradeparticleboard for cabinets 33! wide or wider

• White melamine clad on white door styles

• Natural maple color melamine on all wood lines

• The front edges of shelves have PVC edge-bandingapplied to match interior

• Base shelves are half-depth

• Wall shelves are 5/8! thick and adjustable in3! increments

• 42! high Wall cabinets with two doors have a fixedcenter shelf

D Hinges (1,2)

• 6-way fully concealed 120# self-closing cup hingesallow easy height (vertical), side (horizontal) anddepth (in/out) adjustment

E Cabinet Interior (1,2)

• The standard cabinet interior is a melamine with anatural wood grain print for all wood lines

• A white laminate interior will be used for white linesand painted door styles in white

• Finished Interior Option (FI) — On wall, base andtall cabinets up to 24! deep, the “FI” option can beselected as an upgrade

• The cabinet interior will be a natural maple melamineon all wood lines, white melamine on all white lines

• FI option on glazed cabinets will not be glazed but willmatch the finish color

• Shelves in cabinets with the FI option will be PVCedge banded to match

CABI

NET

SPEC

IFIC

ATIO

NS0.12

High Point Cabinetry — Effective 03/07/2011

Page 13: Specification Catalog - Accent Building Products

CABINET SPECIFICATIONS

Will refer to:1. Cascade, Georgetown, Georgetown Arch, Dakota, Shaker, Mission, Windsor, and Rosehill2. Manhattan

F Drawers (1,2)

• Drawers feature an epoxy coated steel, finished whiteand natural

• Drawer bottoms are 1/2! thick and backs are 5/8!thick matching melamine clad particleboard

• The guides feature self-closing, parallel-closure and apositive stop

• Drawer guides are certified up to 75 lb.

Upgrade Options:

• 5/8! Wood dovetail drawer box with 3/4 extensionundermount guides

• 5/8! Wood dovetail drawer box with full extensionundermount Soft Close guide system

• Drawer sides, front and back, are constructed of5/8! solid wood featuring dovetail construction

• Wood drawer bottoms are 1/4! wood veneer

• Drawer guides are certified up to 75 lbs.

G Base Stretcher Braces (1,2)

• 5/8! industrial grade particleboard

• The front brace is finished with white melamine onwhite lines, natural maple color melamine for all woodlines

• The back stretcher brace is unfinished

H Toe Kicks

• (1) The toe kick is inset into the cabinet box 1-3/4!and is 4! high

• (2) The toe kick is inset into the cabinet box 3-1/2!and is 4-1/2! high

• Toe kicks are 5/8! unfinished industrial gradeparticleboard

• To finish the toe kick space, a TP overlay is required(page 5.26)

— Options available are listed under each cabinet

B

C

D

D

A

E

B

H

F

G

CABINETSPECIFICATIO

NS0.13

High Point Cabinetry — Effective 03/07/2011

Page 14: Specification Catalog - Accent Building Products

CABINET DIMENSIONSfor Cascade, Georgetown, Georgetown Arch, Dakota, Shaker, Mission, Windsor and Rosehill

Wall CabinetsWall Cabinets Wall Cabinets

Utility Cabinets 90” High

Utility Cabinets 96” High

Utility Cabinets 84” HighBase Cabinets / Base Height Vanities

Vanity Base Drawer Vanity File DrawerVanity Base

30”36”

24”27”

12”15”18”21”

No shelves included

1 adjustable shelf included

2 adjustable shelves included on 30” & 36”3 adjustable shelves included on 42” high

4”

4”

4”4” 4”

4”4”4”

34 1/2”

30 3/4” 30 3/4”

95 1/2”

30”

61

61 1/2”

61 1/2” 61 1/2”

24”

18”

89 1/2”

83 1/2”

6 3/16”

24”

6 3/16”

6 3/16”

13 3/4”

30 3/4”

8 3/4”

8 3/4”

8 3/4”

20”

6 3/16”

6 3/16”

8 3/4”

8 3/4”

4”

34 1/2”

Base Drawer

6 3/16”

*** not to scale Inside measurements are for openings

CABINETSPECIFICATIO

NS0.15

High Point Cabinetry — Effective 03/07/2011

Page 15: Specification Catalog - Accent Building Products

CABINET DIMENSIONSfor Manhattan ONLY

WALL CABINETS WALL CABINETS

UTILITY CABINETS 96” HIGH

UTILITY CABINETS 90” HIGH

UTILITY CABINETS 84” HIGH

BASE CABINETS

Vanity File DrawerVanity Drawer

Vanity Lav/ VanityDrawer Lav

VLBase Height/ VDL Base Height

Drawer BasesVanity Drawer Base Height

Drawer Base Pot & Pan

42”

30” &

36”

24”&

27”

12”15”18”&

21”

2 adj. shelves included

1 adj. shelf included

no shelves

2 adj. shelves1 shelf fixed (center)

5 3/4”

34 1/2”23 7/8”

4 1/2”

4 1/2” 4 1/2”

4 1/2” 4 1/2” 4 1/2” 4 1/2”

4 1/2” 4 1/2”

5 3/4”5 3/4” ”4/3 5”4/3 5

5 3/4”

8 7/8”

8 7/8”

5 3/4”

20 7/8”

10 3/8”

10 3/8”5 3/4”

15”

61 1/2” 61 1/2” 61 1/2”

18” 24”

90”

84”

96”

11 7/8”

11 7/8”

34 1/2”

34 1/2”31 1/2”31 1/2”

&34 1/2”

31 1/2”

30”

*** not to scale Inside measurements are for openings

CABI

NET

SPEC

IFIC

ATIO

NS0.16

High Point Cabinetry — Effective 03/07/2011

Page 16: Specification Catalog - Accent Building Products

Construction Optionsand Modifications

RD - Reduce DepthAD - Added DepthND - No DoorsFI - Finished InteriorIA - Installed AccessoriesFB - Finished Bottoms

Available with an Upcharge

Available with Exceptions

Standard

Option Chart Symbols

Not Available

$

!

WC 3030Item

WidthHeight

How to read item code:

Reference Modifications Table on Page 0.14

Features:% Cabinet interior is laminate with a natural maple grain pattern. White interior will be

used on white cabinets.% Hinges are fully concealed 6-way adjustable with a limited lifetime warranty from

manufacturer.% Hinging must be specified left or right for Arch door styles. Right-hand hinging

standard on single door cabinets.% Please refer to Cabinet References (page 0.7-0.9) for decorative hardware

requirements.

Options:Available options are noted beside each cabinet.% Depth Change: A reduction in 3! increments with 6! being minimum depth

allowable. Cabinets may be increased in 3! increments up to a maximum depthof 24!.

% No Doors: Finished interior is not included standard in this option.% Finished Interior: Glazed cabinets will not have a glazed interior.% Finished Bottoms: Check Options Chart beside cabinet for availability.

WALLS

High Point Cabinetry — 03/07/2011

Page 17: Specification Catalog - Accent Building Products

12& Deep Wall Cabinets

12& HIGH

12"

12"

RD AD FI FB ND IA BD□$ □$ □$ □$ □$ ( (

Two doors, no shelves30!, 36!, and 39! wide

WC3012

WC3612

WC3912

15& HIGH

15"

12"

RD AD FI FB ND IA BD□$ □$ □$ □$ □$ ( (

Two doors, no shelves30!, 33!, 36!, and 39! wide

WC3015

WC3315

WC3615

WC3915

18& HIGH

12”

18”

RD AD FI FB ND IA BD□$ □$ □$ □$ □$ ( (

Two doors, no shelves24!, 27!, 30!, 33!, 36!, and 39! wide

WC2418

WC2718

WC3018

WC3318

WC3618

WC3918

WC3018MD

21& HIGH

12”

21”

RD AD FI FB ND IA BD□$ □$ □$ □$ □$ ( (

Two doors, no shelves30!, 33!, and 36! wide

WC3021

WC3321

WC3621

24& HIGH

12”

24”

RD AD FI FB ND IA BD□$ □$ □$ □$ □$ ( (

Two doors, one adjustable shelf24!, 27!, 30!, 33!, 36!, and 39! wide

WC2424

WC2724

WC3024

WC3324

WC3624

WC3924

27& HIGH

27”

12”

RD AD FI FB ND IA BD□$ □$ □$ □$ □$ ( (

Two doors, one adjustable shelf30! wide

WC3027

WAL

LS1.2 WALL CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 18: Specification Catalog - Accent Building Products

30& HIGH

12”

30”

RD AD FI FB ND IA BD□$ □$ □$ □$ □$ ( (

One door, two adjustable shelvesSpecify RH or LH on Arch styles9!, 12!, 15!, 18!, and 21! wide

WC930

WC1230

WC1530

WC1830

WC2130

WC1230GL

WC1530GL

WC1830GL

WC2130GL

WC1230MD

WC1530MD

WC1830MD

WC2130MD

30& HIGH

12”

30”

RD AD FI FB ND IA BD□$ □$ □$ □$ □$ ( (

Two doors, two adjustable shelves24!, 27!, 30!, 33!, 36!, and 39! wide

WC2430

WC2730

WC3030

WC3330

WC3630

WC3930

WC2430GL

WC2730GL

WC3030GL

WC3330GL

WC3630GL

WC3930GL

WC2430MD

WC2730MD

WC3030MD

WC3330MD

WC3630MD

WC3930MD

36& HIGH

36”

12”

RD AD FI FB ND IA BD□$ □$ □$ □$ □$ ( (

One door, two adjustable shelvesSpecify RH or LH on Arch styles9!, 12!, 15!, 18!, and 21! wide

WC936

WC1236

WC1536

WC1836

WC2136

WC1236GL

WC1536GL

WC1836GL

WC2136GL

WC1236MD

WC1536MD

WC1836MD

WC2136MD

36& HIGH

12”

36”

RD AD FI FB ND IA BD□$ □$ □$ □$ □$ ( (

Two doors, two adjustable shelves24!, 27!, 30!, 33!, and 36! wide

WC2436

WC2736

WC3036

WC3336

WC3636

WC2436GL

WC2736GL

WC3036GL

WC3336GL

WC3636GL

WC2436MD

WC2736MD

WC3036MD

WC3336MD

WC3636MD

WALLS

1.3WALL CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 19: Specification Catalog - Accent Building Products

42& HIGH

12”

42”

RD AD FI FB ND IA BD□$ □$ □$ □$ □$ ( (

One door, two adjustable shelvesCenter shelf fixed for structural integritySpecify RH or LH on Arch styles9!, 12!, 15!, 18!, and 21! wide

WC942

WC1242

WC1542

WC1842

WC2142

WC1242GL

WC1542GL

WC1842GL

WC2142GL

WC1242MD

WC1542MD

WC1842MD

WC2142MD

42& HIGH

42”

12”

RD AD FI FB ND IA BD□$ □$ □$ □$ □$ ( (

Two doors, two adjustable shelvesCenter shelf fixed for structural integrity24!, 27!, 30!, 33!, and 36! wide

WC2442

WC2742

WC3042

WC3342

WC3642

WC2442GL

WC2742GL

WC3042GL

WC3342GL

WC3642GL

WC2442MD

WC2742MD

WC3042MD

WC3342MD

WC3642MD

Wall Rack Cabinets

LATTICE WINE RACK CABINET

12”18” & 24”

30” & 36”

WRC1830E 18” 30” 11WRC3018E 30” 18” 11WRC2430E 24” 30” 17WRC2436E 24” 36” 23

Numberof

BottlesA B

RD AD FI FB ND IA BD( ( ) □$ ) ( (

Not available unfinished

WRC2430E

WRC2436E

WRC1830E

WRC3018E

PLATE RACK CABINET

15”

30”/36”12”

RD AD FI FB ND IA BD( ( ) □$ ) ( (

Accommodates 10! platesFour front dowels removable for cleaningFinished interiorIncreasing depth is not recommended as it will allow plates to roll back too far

WC3015PRE

WC3615PRE

WAL

LS1.4 WALL CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 20: Specification Catalog - Accent Building Products

Refrigerator Wall Cabinets

24& DEEP

12”/15”/18”/21”/24”

24”30”/33”/36”/39”/42”/48”*

RD AD FI FB ND IA BD□$ □$ □$ □$ □$ ( (

For use over refrigeratorsFI available on cabinets with no doors only48! has four doors

RW3012

RW3312

RW3612

RW3912

RW4212

RW4812

RW3015

RW3315

RW3615

RW3915

RW4215

RW4815

RW3018

RW3318

RW3618

RW3918

RW4218

RW4818

RW3021

RW3321

RW3621

RW3921

RW4221

RW4821

RW3024

RW3324

RW3624

RW3924

RW4224

RW4824

24& Deep Wall Cabinets

24& DEEP

24”

24”

RD AD FI FB ND IA BD□$ □$ □$ □$ □$ ( (

Two doorsFor use over refrigeratorsFI available on cabinets with no doors only36! and 39! wide

WC362424

WC392424

Wall Corner Cabinets

30& HIGH

12”

30”/36”

RD AD FI FB ND IA BD□$ □$ □$ □$ □$ ( (

One door, two adjustable shelvesSpecify RH or LH on Arch styles24!, 30!, and 36! wide have only one door as shown14-7/8! wide fixed panelFI available on cabinets with no doors only

WCC2430

WCC3030

WCC3630

WALLS

1.5WALL CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 21: Specification Catalog - Accent Building Products

36& HIGH

See drawing/options on page 1.5 WCC2436

WCC3036

WCC3636

30& HIGH

30”

12”

42”

RD AD FI FB ND IA BD□$ □$ □$ □$ □$ ( (

Two doors, two adjustable shelves14-7/8! wide fixed panelFI available on cabinets with no doors only

WCC4230

42& HIGH

42”

12”

RD AD FI FB ND IA BD□$ □$ □$ □$ □$ ( (

One door, two adjustable shelvesCenter shelf fixed for structural integritySpecify RH or LH on Arch stylesFI available on cabinets with no doors only14-7/8! wide fixed panel has one door24!, 30!, and 36! wide

WCC2442

WCC3042

WCC3642

Diagonal Wall Cabinets

30& & 36& HIGH

30”/36”

24”/27” 24”/27”

12 1/4”/15 1/4”

RD AD FI FB ND IA BD( ( □$ □$ □$ □$ (

One door, two adjustable shelvesSpecify RH or LH on Arch stylesCWC cabinets have the ends already finished

CWC2430

CWC2730

CWC2436

CWC2736

CWC2430GL

CWC2730GL

CWC2436GL

CWC2736GL

CWC2430MD

CWC2730MD

CWC2436MD

CWC2736MD

42& HIGH

24”/27”24”/27”

42”

12 1/4”/15 1/4”

RD AD FI FB ND IA BD( ( □$ □$ □$ □$ (

One door, two adjustable shelvesCenter shelf fixed for structural integritySpecify RH or LH on Arch stylesCWC cabinets have the ends already finished

CWC2442

CWC2742

CWC2442GL

CWC2742GL

CWC2442MD

CWC2742MD

WAL

LS1.6 WALL CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 22: Specification Catalog - Accent Building Products

Wall End Angled

30& & 36& HIGH

12” 12”

30”/36”

RD AD FI FB ND IA BD( ( □$ ( □$ ( (

Two doors, two fixed shelves

WEC1230

WEC1236

WEC1230GL

WEC1236GL

42& HIGH

12”12”

42”

RD AD FI FB ND IA BD( ( □$ ( □$ ( (

Two doors, three fixed shelves

WEC1242

WEC1242GL

30& & 36& HIGH (MANHATTAN CONSTRUCTION)

12” 12”

30”/36”

RD AD FI FB ND IA BD( ( □$ ( □$ ( (

Two doors, two fixed shelves

WEA1230

WEA1236

42& HIGH (MANHATTAN CONSTRUCTION)

12”12”

42”

RD AD FI FB ND IA BD( ( □$ ( □$ ( (

Two doors, three fixed shelves

WEA1242

Wall End Cabinets

30& & 36& HIGH (MANHATTAN CONSTRUCTION)

12”12”

30”/36”

RD AD FI FB ND IA BD( ( □$ ( □$ ( (

One door, two fixed shelvesSpecify RH or LH

WEC1230

WEC1236

42& HIGH (MANHATTAN CONSTRUCTION)

12” 12”

42”

RD AD FI FB ND IA BD( ( □$ ( □$ ( (

One door, three fixed shelvesSpecify RH or LH

WEC1242

WALLS

1.7WALL CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 23: Specification Catalog - Accent Building Products

Microwave Wall Cabinets

21& HIGH

17 3/8”

30”

28 3/4”

12”

19 3/4”opening

21”

RD AD FI FB ND IA BD( ( ) ( ) ( (

Interior is veneered to match the exterior

WCM3021

30& & 36& HIGH

25 3/4”&

28 3/4”17 3/8”

opening

27” & 30”12”

17 3/8”

30”&

36”

RD AD FI FB ND IA BD( ( □$ ( □$ ( (

Two doors, no shelves

WCMW2730

WCMW3030

WCMW2736

WCMW3036

42& HIGH

12”

42”

25 3/4”&

28 3/4”

27” & 30”

17 3/8”

17 3/8”

RD AD FI FB ND IA BD( ( □$ ( □$ ( (

Two doors, one adjustable shelf

WCMW2742

WCMW3042WAL

LS1.8 WALL CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 24: Specification Catalog - Accent Building Products

CORNER SHELF TOP PLATE

42”

12”6”

LH as shown

12”

30”/36”

6”

RH as shown

Designate LH or RH when ordering ALL white linesIn white lines, edges of the shelves are profiledCSTP126 has a square top shelf for use with crown moldings, and is finished onboth sides (not pictured)

CS630

CS636

CS642

CSTP126

BOOKCASES

24”, 30”, 36”

48”/52”/58”

12” Bookcases havea finished interiorand exterior. Bottom shelf isstationary andother 2 shelvesare adjustable.

Fixed shelf has a 2 3/4”facia board on front

17 1/2”from bottom

of facia boardto countertop

64”

Fixed shelfhas a 2 3/4”facia boardon front

24”, 30”, 36”12”

17 1/2”

from bottom of facia boardto countertop

Fixed bottom shelf and two adjustable shelves in 48!/52!/58! highFixed bottom shelf and three adjustable shelves in 64! highInterior is finished to match exterior

BC2448E

BC3048E

BC3648E

BC2452E

BC3052E

BC3652E

BC2458E

BC3058E

BC3658E

BC2464E

BC3064E

BC3664E

DESK ORGANIZERS

6”

12”

30”

6”

12”

36”

Interior finished to match exterior

DO30

DO36

WALLS

1.9WALL ACCESSORIES

High Point Cabinetry — Effective 03/07/2011

Page 25: Specification Catalog - Accent Building Products

SPICE DRAWER CABINET, WINE CUBE CABINET

12”18”, 24”,30”, 36”, 42”

6”

5 3/4”

5 3/4”

Cabinet shown horizontal withone spice drawer box, SPDBX

6”

18”,24”,30”,36”,42”

12”

*Specify species; M=Maple, C=Cherry18! wide spice drawer cabinet accepts three spice drawer boxes,24! wide accepts four boxes,30! wide accepts five boxes,36! wide accepts six boxes, and42! wide accepts seven boxesBoxes to be ordered separately as SPDBXAvailable in all finishesFinished both endsNot intended for end of run (staples and pinholes will show)Finished on side, top, and bottomDrawer boxes are ordered by door style

SPWC18

SPWC24

SPWC30

SPWC36

SPWC42

SPDBX

SCALLOPED WINE RACK

2 1/2”

36”

36”

Scalloped woodTrim in 3! increments

WR

STEMWARE HOLDER

36”

11 3/4”

1 5/8”

3-1/4! Moldings are mounted on 4! centers

SH

CORNER APPLIANCE HUTCH

12 1/4”

24”

CAH

18”

Finished on interior and exterior

CAHX

CORNER APPLIANCE HUTCH(MANHATTAN CONSTRUCTION)

12 1/4”

24”

CAH

18”

Finished on interior and exterior

CAHE

ROUND LAZY SUSAN SHELVES

For use in diagonal corner wall cabinetsDesignate White (W) or Almond (A) when ordering

2 - 20! Diagonal RLS30

2 - 20! Diagonal RLS36

3 - 20! Diagonal RLS42

WAL

LS1.10 WALL ACCESSORIES

High Point Cabinetry — Effective 03/07/2011

Page 26: Specification Catalog - Accent Building Products

PB 30Item

Width

How to read item code:

Construction Optionsand Modifications

WD - Wood Dovetail DrawerFX - Wood Dovetail Drawer with

RD - Reduce DepthAD - Added DepthND - No Doors/No DrawersFI - Finished InteriorIA - Installed AccessoriesBD - Bottom Drawers

Available with an Upcharge

Available with Exceptions

Standard

Option Chart Symbols

Not Available

$

!

Base Cabinets

Soft Close Feature

Reference Modifications Table on Page 0.14

Features:% Cabinet interior is laminate with a natural maple grain pattern. White interior will be

used on white cabinets.% Hinges are fully concealed 6-way adjustable with a limited lifetime warranty from

manufacturer.% Right-hand hinging standard on single door cabinets.% Arch door styles not available in base cabinets.% Drawer cabinets with a reduced depth of more than 18! will receive a vent unless

upgraded to FX.% Standard cabinet has a 3/4 extension integrated metal sided drawer.% Shelves are half-depth.% Cabinets have unfinished toe kick. A Toe Plate (TP) must be ordered to finish.% Please refer to Cabinet References (page 0.7-0.9) for decorative hardware

requirements.

Options:Available options are noted beside each cabinet.% Depth Change: A reduction in 3! increments with 12! being minimum depth allowable.% No Doors: Finished Interior is not included standard in this option.% Finished Interior: Glazed cabinets will not have a glazed interior.% Bottom Drawers: Check Options Chart beside cabinet for availability.

BASES

High Point Cabinetry — 03/07/2011

Page 27: Specification Catalog - Accent Building Products

TRAY BASE

34 1/2”

24”9”

For price columns 1-6 only

34 1/2”

24”9”

For price columns 7 and 8 onlySolid topWill accommodate BPO5 accessory

RD AD FI FB ND IA BD□$ □$ □$ ( □$ ( (

One door, no shelves

TB9

PANTRY BASES

34 1/2”

24”

RD AD FI FB ND IA BD□$ □$ □$ ( □$ □$ □$

One door, one drawer, one full-depth shelf12!, 15!, 18!, and 21! wide

PB12

PB15

PB18

PB21

PANTRY BASES

24”

34 1/2”

RD AD FI FB ND IA BD□$ □$ □$ ( □$ □$ □$

Two doors, one drawer, one full-depth shelf24!, 27!, and 30! wide

PB24

PB27

PB30

PANTRY BASES

24”

34 1/2”

RD AD FI FB ND IA BD□$ □$ □$ ( □$ □$ □$

Two doors, two drawers, one full-depth shelf33!, 36!, and 39! wide

PB33

PB36

PB39

BASE

S2.2 BASE CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 28: Specification Catalog - Accent Building Products

BURNER SINK BASE

24”

34 1/2”

For price columns 1-6 onlyTwo full-height doorsBlind apron

24”

34 1/2”

For price columns 7 and 8 only

RD AD FI FB ND IA BD□$ □$ □$ ( □$ □$ (

Two doors, one vent, no shelves24!, 27!, 30!, 33!, 36!, 39! and 42! wide

BSB24

BSB27

BSB30

BSB33

BSB36

BSB39

BSB42

DRAWER BASES

24”

34 1/2”

RD AD FI FB ND IA BD□$ □$ □$ ( □$ □$ (

Four drawers12!, 15!, 18!, 21!, 24!, and 30! wideTwo shallow height drawers, two deep drawers

DB12

DB15

DB18

DB21

DB24

DB30

POT & PAN DRAWER BASE

24”

34 1/2”

RD AD FI FB ND IA BD□$ □$ □$ ( □$ □$ (

Three drawers30! and 36! wideTop drawer is shallowBottom two drawers are deep

DBP30

DBP36

BASES2.3BASE CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 29: Specification Catalog - Accent Building Products

BLIND BASE CABINETS

RD AD FI FB ND IA BD□$ □$ □$ ( □$ □$ (

One door, one drawer, one full-depth shelf39!, 42!, 45!, and 48! wideUse filler on adjacent wall

PBC39L

PBC39R

PBC42L

PBC42R

PBC45L

PBC45R

PBC48L

PBC48R

LAZY SUSAN CORNER BASES

34 5/8” 34 5/8”

34 1/2”

Toe Plates shipped loose

RD AD FI FB ND IA BD( ( □$ ( ( □$ (

Requires 36! wall spaceSets 1-3/8! from rear wallsFrameless Corner Base Ends (except white lines) need finished ends called outin R or L where base end is exposed and not connected to adjacent baseComes with four leveler legs and loose toe plate

LSCB3636

LAZY SUSAN CORNER BASES(MANHATTAN CONSTRUCTION)

33”/36”33”/36”

24”

34 1/2”

RD AD FI FB ND IA BD( ( □$ ( ( □$ (

Requires 33!/36! wall spaceFrameless Corner Base Ends (except white lines) need finished ends called outin R or L where base end is exposed and not connected to adjacent baseComes with two leveler legs and toe plate attached

LSCB3333

LSCB3636

BASE

S2.4 BASE CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 30: Specification Catalog - Accent Building Products

EASY REACH CORNER BASES

34 1/2”

22 5/8”

34 5/8”34 5/8”

RD AD FI FB ND IA BD( ( □$ ( ( ( □$

Requires 36! wall spaceSets 1-3/8! from rear wallsShelf is not adjustable and can not be ordered separatelyToe Plates shipped looseFrameless Corner Base Ends (except white lines) need finished ends called outin R or L where base end is exposed and not connected to adjacent baseComes with four leveler legs and loose toe plate

EZCB3636

EASY REACH CORNER BASES(MANHATTAN CONSTRUCTION)

33”/36”33”/36”

24”

34 1/2”

RD AD FI FB ND IA BD( ( □$ ( ( □$ (

Requires 33/36! wall spaceShelf is adjustableFrameless Corner Base Ends (except white lines) need finished ends called outin R or L where base end is exposed and not connected to adjacent baseComes with two leveler legs and toe plate attached

EZCB3333

EZCB3636

BASE END CABINET

34 1/2”

24”24”

24” 24”

23 3/8”

RD AD FI FB ND IA BD( ( □$ ( □$ ( (

Two doors, one adjustable shelf

BEC24

BASE TRANSITIONAL CABINETS

12”24”

34 1/2”

12”24”

12”

12”

RD AD FI FB ND IA BD( ( □$ ( □$ ( (

One door, one shelfLH shownThe left or right hand is determined by which side the short end is located

BTC12L

BTC12R

BASES2.5BASE CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 31: Specification Catalog - Accent Building Products

TWO FACED ISLAND BASES

24”

34 1/2”

RD AD FI FB ND IA BD□$ □$ □$ ( ( ( □$

Two doors each sideOne drawer and two doors on one side, two full-height doors on other sideThere is a dividing panel in center of cabinet for structural purposesOne adjustable shelf on each sideRT not available on 2FIB bases

2FIB24

2FIB30

TWO FACED ISLAND BASES(MANHATTAN CONSTRUCTION)

24”24”/30”

34 1/2”

RD AD FI FB ND IA BD□$ □$ □$ ( ( ( □$

Two doors each sideOne drawer and two doors on one side, vent and two doors on other sideThere is a dividing panel in the center of cabinet for structural purposesOne adjustable shelf on each sideRT not available on 2FIB bases

2FIB24

2FIB30

TWO FACED ISLAND BASES

34 1/2”

24”

RD AD FI FB ND IA BD□$ □$ □$ ( ( ( □$

Two doors each sideTwo drawers and two doors on one side, two full-height doors on other sideThere is a dividing panel in center of cabinet for structural purposesOne adjustable shelf on each sideRT not available on 2FIB bases

2FIB36

TWO FACED ISLAND BASES(MANHATTAN CONSTRUCTION)

24”36”

34 1/2”

RD AD FI FB ND IA BD□$ □$ □$ ( ( ( □$

Two doors each sideTwo drawers and two doors on one side, vent and two doors on other sideThere is a dividing panel in the center of cabinet for structural purposesOne adjustable shelf on each sideRT not available on 2FIB bases

2FIB36

BASE END SHELF

12”

34 1/2”

24”

11-1/4” Radius

Shipped ready-to-assembleCan be assembled right or left

BES1224

BASE

S2.6 BASE CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 32: Specification Catalog - Accent Building Products

CORNER SINK FRONTS

34 1/2”

16 1/2”

34 1/2”

25 1/2”

Top View24”

24”36” or 42”

36” or 42”

CSF165 bridges 36! x 36! openingCSF255 bridges 42! x 42! openingToe plates shipped loose

CSF165

CSF255

BASE SINK FRONT

15” & 21”

34 1/2”

4 7/8”

One door, one vent

BSF15

BSF21

BASE SINK FRONT

4 7/8”24”, 27”, 30”,33” & 36”

34 1/2”

Two doors, one vent

BSF24

BSF27

BSF30

BSF33

BSF36

SINK FRONT FLOORS

Not shown3/8! Fiberboard - stained two sides48! X 23-1/4!42! X 42!

SFF4824

SFF4242

BASES2.7BASE CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 33: Specification Catalog - Accent Building Products

ROLL OUT TRAYS

Order RTU same size as cabinetOne unit packed per boxStandard RTU’s are 7mil miter-foldvinyl tray with 2-1/2! sidesColor will be natural maple for woodlines and white for white linesDesigned for pantry base and utilitycabinets that are 24! deep ONLYWill not fit vanity cabinetsPilasters are 20! tall and sit 1/4! frombottom of cabinetAccommodates three roll outs maxper pilaster50 lb. capacity per tray

RT12

RT15

RT18

RT21

RT24

RT27

WOOD ROLL OUT TRAYS

Order WDRTU same size as cabinetOne unit packed per boxWood RT’s are a maple wood traywith 2-1/2! sidesDesigned for pantry base and utilitycabinets that are 24! deep ONLYWill not fit vanity cabinetsPilasters are 20! tall and sit 1/4! frombottom of cabinetAccommodates three roll outs maxper pilasterAll mounting fixtures included50 lb. capacity per tray

WRT12

WRT15

WRT18

WRT21

WRT24

WRT27

WRT30

WRT33

WRT36

BASE

S2.8 ROLL OUT TRAYS

High Point Cabinetry — Effective 03/07/2011

Page 34: Specification Catalog - Accent Building Products

SINGLE WASTE BASKET FOR 24& DEEP BASE

10 3/4”

36 QtSWB fits all base cabinets 12! wide and largerDoes not fit TB9, PB21, or PB24

SWB

DOUBLE WASTE BASKET FOR 24& DEEP BASE

11 5/8”

27 Qt per containerFits bases that are 15! wide and largerDoes not fit TB9, PB12, PB24, or PB27

DWB

DOOR MOUNTING KIT FOR 24& DEEP BASE

Drawing not shown DMK

35 QT SINGLE WASTE BIN

19 1/4”

22 5/8”

35 qtcontainerincluded

6” Dove-tailed construction

12”

Full ext for PB15 and upWill not work in PB27; opening is too smallAll mounting hardware and DMK includedFeatures soft-close open & close

WDSWB35

35 QT DOUBLE WASTE BIN

2 - 35 qtcontainersincluded

19 1/4”

6” Dove-tailed construction

22 5/8”

14 1/4”

Full ext for PB18 and upWill not work in PB30; opening is too smallAll mounting hardware and DMK includedFeatures soft-close open & close

WDDWB35

CUTLERY TRAY

Plastic - 16! x 21!Trim to fit drawers in 18! base cabinets

CT18

BASES2.9BASE ACCESSORIES

High Point Cabinetry — Effective 03/07/2011

Page 35: Specification Catalog - Accent Building Products

DRAWER INSERT ACCESSORIES

14! Wood Cutlery TrayFor use in 15! and 18! cabinets

20! Wood Cutlery TrayFor use in 21! and 24! cabinets

18! Wood Utility TrayFor use in 12!, 18!, 21!, and 24! cabinets

18! Spice Drawer InsertFor use in 18! and 21! cabinets

WDCT14

WDCT20

WDUT18

WDSI18

CORNER PULLOUT ORGANIZERS

LeMans Corner Pullout - R (Right Pull)

LeMans Corner Pullout - L (Left Pull)

Will work in both framed and frameless cabinetsSee drawing and chart below

LBCP4851R

LBCP4851L

Framed CabinetAA

Right Pull

Left-hand cornerbase shown

Right-hand cornerbase shown

Left PullB B

CC

A B

Framed Cabinet

C

Frameless Cabinet

C

INCHES (mm) INCHES (mm) INCHES (mm) INCHES (mm)

min. 33-1/2 (851) min. 21 (533) 15-16 (381-406) 16-17 (406-432)

min. 34-1/2 (876) min. 21 (533) 18-19 (457-483) 19-20 (483-508)

min. 39-1/2 (1003) min. 21 (533) 21-22 (533-559) 22-23 (559-584)

Inside dimension (clearance height) for all cabinets: min. 28 inches (711 mm)

BASE

S2.10 BASE ACCESSORIES

High Point Cabinetry — Effective 03/07/2011

Page 36: Specification Catalog - Accent Building Products

Tall Cabinets

UC 158424Item

Width Depth

Height

How to read item code:

Available with an Upcharge

Available with Exceptions

Standard

Option Chart Symbols

Not Available

$

!

Construction Optionsand Modifications

WD - Wood Dovetail DrawerFX - Wood Dovetail Drawer with

RD - Reduce DepthAD - Added DepthND - No Doors/No DrawersFI - Finished Interior

BD - Bottom DrawersIA - Installed Accessories

Soft Close Feature

Reference Modifications Table on Page 0.14

Features:% Cabinet interior is laminate with a natural maple grain pattern. White interior will be

used on white cabinets.% Hinges are fully concealed 6-way adjustable with a limited lifetime warranty from

manufacturer.% Right-hand hinging standard on single door cabinets.% For Oven Cabinets (OC) with drawers, standard drawer is 3/4 extension metal

sided drawer.% Bottom doors will not be Arch door style.% Shelves are full depth.% Cabinets have unfinished toe kick. A Toe Plate (TP) must be ordered to finish.% Please refer to Cabinet References (page 0.7-0.9) for decorative hardware

requirements.

Options:Available options are noted beside each cabinet.% Depth Change: A reduction in 3! increments with 12! being minimum depth allowable.% No Doors: Finished interior is not included standard in this option.% Finished Interior: Glazed cabinets will not have a glazed interior.% Bottom Drawers: Check Options Chart beside cabinet for availability.

TALLS

High Point Cabinetry — 03/07/2011

Page 37: Specification Catalog - Accent Building Products

Utility Cabinets

12& DEEP

83 1/2”89 1/2”95 1/2”

12” / 24”18”

RD AD FI FB ND IA BD□$ □$ □$ ( □$ □$ (

18! wide96! high cabinet shown hinged RH84! high has one fixed shelf only90! high has one fixed shelf and one adjustable shelf96! high has one fixed shelf and two adjustable shelvesShelf kits available at additional cost

UC188412

UC189012

UC189612

24& DEEP

See drawing/options above UC188424

UC189024

UC189624

12& DEEP (MANHATTAN CONSTRUCTION)

84”90”96”

12” / 24”15” & 18”

RD AD FI FB ND IA BD□$ □$ □$ ( □$ □$ (

15!/18! wide96! high cabinet shown hinged RH84! high has one fixed shelf only90! high has one fixed shelf and one adjustable shelf96! high has one fixed shelf and two adjustable shelvesShelf kits available at additional cost

UC158412

UC159012

UC159612

UC188412

UC189012

UC189612

24& DEEP (MANHATTAN CONSTRUCTION)

See drawing/options above UC158424

UC159024

UC159624

UC188424

UC189024

UC189624

TALL

S3.2 TALL CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 38: Specification Catalog - Accent Building Products

12& DEEP

24”24”

83 1/2”89 1/2”95 1/2”

RD AD FI FB ND IA BD□$ □$ □$ ( □$ □$ (

24! wide84! high has one fixed shelf only90! high has one fixed shelf and one adjustable shelf96! high has one fixed shelf and two adjustable shelvesShelf kits available at additional cost

UC248412

UC249012

UC249612

24& DEEP

See drawing/options above UC248424

UC249024

UC249624

12& DEEP (MANHATTAN CONSTRUCTION)

12” & 24”

84”90”96”

24”, 30” & 36”

RD AD FI FB ND IA BD□$ □$ □$ ( □$ □$ (

24!/30!/36! wide84! high has one fixed shelf only90! high has one fixed shelf and one adjustable shelf96! high has one fixed shelf and two adjustable shelvesShelf kits available at additional cost

UC248412

UC249012

UC249612

UC308412

UC309012

UC309612

UC368412

UC369012

UC369612

24& DEEP (MANHATTAN CONSTRUCTION)

See drawing/options above UC248424

UC249024

UC249624

UC308424

UC309024

UC309624

UC368424

UC369024

UC369624

TALLS3.3TALL CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 39: Specification Catalog - Accent Building Products

Oven Cabinets

OVEN CABINETS - WHITE LINES

30” / 33” 24”

83 1/2”89 1/2”95 1/2”

RD AD FI FB ND IA BD( ( □$ ( ( ( (

Shown with panel partially removed for oven installation84! high has no shelf90! high has one adjustable shelf and one fixed shelf96! high has two adjustable shelves and one fixed shelfFrameless Front Panel removable for routing to fit oven and drawer kitLedger support includedDoes not include drawer kitsPanel shipped unattached; packed with cabinetSolid panel shaped on all four edges from bottom of door to top of toe kick

OC3084

OC3384

OC3090

OC3390

OC3096

OC3396

OVEN CABINETS (MANHATTAN CONSTRUCTION)

30” / 33” 24”

84”90”96”

RD AD FI FB ND IA BD( ( □$ ( ( ( (

Shown with panel partially removed for oven installation84! high has no shelf90! high has one adjustable shelf and one fixed shelf96! high has two adjustable shelves and one fixed shelfFrameless Front Panel removable for routing to fit oven and drawer kitLedger support includedDoes not include drawer kits

OC3084

OC3384

OC3090

OC3390

OC3096

OC3396

OVEN DRAWER KITS

30” / 33”6 3/16”

ODK30

ODK33

OVEN DRAWER KITS (MANHATTAN CONSTRUCTION)

30” / 33”5 3/4”

ODK30

ODK33

TALL

S3.4 TALL CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 40: Specification Catalog - Accent Building Products

30& WIDE - WOOD LINES

83 1/2” /89 1/2” /95 1/2”

25”Opening

30”

54 15/16”

48 9/16”

42 1/4”

OC (T) - 3 Drawers

OC (D) - 2 Drawers

OC (S) - 1 Drawer

RD AD FI FB ND IA BD( ( □$ ( ( ( (

Please specify Single (S), Double (D), or Triple (T) drawers when orderingNot available in white lines

84! OC3084S

84! OC3084D

84! OC3084T

90! OC3090S

90! OC3090D

90! OC3090T

96! OC3096S

96! OC3096D

96! OC3096T

33& WIDE - WOOD LINES

83 1/2” /89 1/2” /95 1/2”

28”Opening

33”

54 15/16”

48 9/16”

42 1/4”

OC (T) - 3 Drawers

OC (D) - 2 Drawers

OC (S) - 1 Drawer

RD AD FI FB ND IA BD( ( □$ ( ( ( (

Please specify Single (S), Double (D), or Triple (T) drawers when orderingNot available in white lines

84! OC3384S

84! OC3384D

84! OC3384T

90! OC3390S

90! OC3390D

90! OC3390T

96! OC3396S

96! OC3396D

96! OC3396T

TALLS3.5TALL CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 41: Specification Catalog - Accent Building Products

SHELF KITS FOR UTILITY CABINETS

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

UC3S1812X

UC3S1824X

UC3S2412X

UC3S2424X

SHELF KITS FOR UTILITY CABINETS(MANHATTAN CONSTRUCTION)

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

UC3S1512

UC3S1524

UC3S1812

UC3S1824

UC3S2412

UC3S2424

UC3S3012

UC3S3024

UC3S3612

UC3S3624

PANTRY ROLL OUTS

Fits UC1824Mount left or right side of cabinetBaskets are 3! apartAvailable in white only

Fits UC2424Mount in center onlyBaskets are 3! apartAvailable in white only

White PROS

White PROD

TALL

S3.6 TALL ACCESSORIES

High Point Cabinetry — Effective 03/07/2011

Page 42: Specification Catalog - Accent Building Products

Vanity Cabinets

VDL 12BHItem

Width

How to read item code:

Construction Optionsand Modifications

WD - Wood Dovetail DrawerFX - Wood Dovetail Drawer with

RD - Reduce DepthAD - Added DepthND - No Doors/No DrawersFI - Finished InteriorIA - Installed AccessoriesBD - Bottom Drawer

Height

Available with an Upcharge

Available with Exceptions

Standard

Option Chart Symbols

Not Available

$

!

Soft Close Feature

Reference Modifications Table on Page 0.14

Features:% Cabinet interior is laminate with a natural maple grain pattern. White interior will be

used on white cabinets.% Hinges are fully concealed 6-way adjustable with a limited lifetime warranty from

manufacturer.% Manhattan vanity cabinets are 31-1/2! high standard and 34-1/2! high for Base

Height (BH); all other vanity cabinets are 30-1/2! high standard and 34-1/2! high forBase Height (BH).

% Hinging must be specified left or right. Right-hand hinging standard on single doorcabinets.

% Arch door styles not available in vanity cabinets.% Drawer cabinets with a reduced depth of more than 18! will receive a vent unless

upgraded to FX.% Standard cabinet has a 3/4 extension integrated metal sided drawer.% Shelves are half-depth.% Cabinets have unfinished toe kick. A Toe Plate (TP) must be ordered to finish.% Please refer to Cabinet References (page 0.7-0.9) for decorative hardware

requirements.

Options:Available options are noted beside each cabinet.% Depth Change: A reduction in 3! increments with 12! being minimum depth allowable.% No Doors: Finished interior is not included standard in this option.% Finished Interior: Glazed cabinets will not have a glazed interior.% Bottom Drawers: Check Options Chart beside cabinet for availability.

VANITIES

High Point Cabinetry — 03/07/2011

Page 43: Specification Catalog - Accent Building Products

21& Deep Vanities

31-1/2& HIGH (MANHATTAN CONSTRUCTION)

16”18”

31 1/2”

VENT WITH VERTICAL BRACE

RD AD FI FB ND IA BD□$ □$ □$ ( □$ ( (

One door, one vent

VL1816

30-3/4& HIGH

21”

30 3/4”

21”

RD AD FI FB ND IA BD□$ □$ □$ ( □$ ( (

One full-height door, no drawers, no shelves

VL21L

VL21R

31-1/2& HIGH (MANHATTAN CONSTRUCTION)

21” 21” VENTWITHVERTICALBRACE

31 1/2”

RD AD FI FB ND IA BD□$ □$ □$ ( □$ ( (

One door, one vent, no shelves

VL21

30-3/4& HIGH

21”

30 3/4”

RD AD FI FB ND IA BD□$ □$ □$ ( □$ ( (

Two full-height doors, no drawers, no shelves24!, 27!, 30!, 33!, and 36! wide

VL24

VL27

VL30

VL33

VL36

31-1/2& HIGH (MANHATTAN CONSTRUCTION)

21”24”, 27”, 30”,33” & 36”

VENT WITH VERTICAL BRACE

31 1/2”

RD AD FI FB ND IA BD□$ □$ □$ ( □$ ( (

Two doors, one vent, no shelves

VL24

VL27

VL30

VL33

VL36

34-1/2& HIGH

34 1/2”

21”

RD AD FI FB ND IA BD□$ □$ □$ ( ( □$ (

Two full height doors, no shelves24!, 27!, 30!, 33!, and 36! wide

VL24BH

VL27BH

VL30BH

VL33BH

VL36BHVANI

TIES

4.2 VANITY CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 44: Specification Catalog - Accent Building Products

34-1/2& HIGH (MANHATTAN CONSTRUCTION)

Vent &VerticalBrace

21”24”, 27”, 30”,33” & 36”

34 1/2”

RD AD FI FB ND IA BD□$ □$ □$ ( ( □$ (

Two doors, one vent, no shelves

VL24BH

VL27BH

VL30BH

VL33BH

VL36BH

30-3/4& HIGH

21”

30 3/4”

RD AD FI FB ND IA BD□$ □$ □$ ( □$ ( (

One door, one drawer, no shelves12!, 15!, and 18! wideAll hinged RH (door reversible)

VDL12

VDL15

VDL18

31-1/2& HIGH (MANHATTAN CONSTRUCTION)

21”

31 1/2”

12”, 15” & 18”

RD AD FI FB ND IA BD□$ □$ □$ ( □$ ( (

One door, one drawer, no shelfAll hinged RH (door reversible)

VDL12

VDL15

VDL18

34-1/2& HIGH

34 1/2”

21”

RD AD FI FB ND IA BD□$ □$ □$ ( ( □$ □$

One door, one drawer, no shelves12!, 15!, and 18! wideDrawer is shallow heightAll hinged RH (door reversible)

VDL12BH

VDL15BH

VDL18BH

34-1/2& HIGH (MANHATTAN CONSTRUCTION)

34 1/2”

21”12”, 15“ & 18”

RD AD FI FB ND IA BD□$ □$ □$ ( ( □$ □$

One door, one drawer, no shelvesDrawer is shallow heightAll hinged RH (door reversible)

VDL12BH

VDL15BH

VDL18BH

VANITIES4.3VANITY CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 45: Specification Catalog - Accent Building Products

30-3/4& HIGH

21”30” / 36”

30 3/4”

RD AD FI FB ND IA BD□$ □$ □$ ( ( ( (

One door, two drawers, no shelvesFalse front above door and drawersThe basis for determining RH or LH for this cabinet is based on the location ofthe door. If the door is on the right side of the cabinet and the stack of drawersis on the left side, it would be ordered as a RH cabinet (LH shown)

VDL30L

VDL30R

VSD36L

VSD36R

31-1/2& HIGH (MANHATTAN CONSTRUCTION)

31 1/2”

30”/36” 21”

RD AD FI FB ND IA BD□$ □$ □$ ( ( ( (

One door, two drawers, one vent, no shelvesFalse front above door and drawersThe basis for determining RH or LH for this cabinet is based on the location ofthe door. If the door is on the right side of the cabinet and the stack of drawersis on the left side, it would be ordered as a RH cabinet (as shown)

VDL30L

VDL30R

VSD36L

VSD36R

34-1/2& HIGH

341/2”

21”

RD AD FI FB ND IA BD□$ □$ □$ ( ( ( (

One door, three drawers, one vent, no shelvesLH as shown30! and 36! wideFalse front above door and drawersOne drawer is shallow height and two drawers are tall height

VDL30BHL

VDL30BHR

VSD36BHL

VSD36BHR

34-1/2& HIGH (MANHATTAN CONSTRUCTION)

21”

341/2”

RD AD FI FB ND IA BD□$ □$ □$ ( ( ( (

One door, three drawers, one vent, no shelvesRH as shown30! and 36! wideFalse front above door and drawersOne drawer is shallow height and two drawers are tall height

VDL30BHL

VDL30BHR

VSD36BHL

VSD36BHR

VANI

TIES

4.4 VANITY CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 46: Specification Catalog - Accent Building Products

30-3/4& HIGH

30 3/4”

21”36” / 42”

RD AD FI FB ND IA BD□$ □$ □$ ( ( ( (

Two doors, two drawers, no shelvesDrawers are shallow heightFalse front between drawers

VDL36

VDL42

31-1/2& HIGH (MANHATTAN CONSTRUCTION)

31 1/2”

21”36” / 42”

RD AD FI FB ND IA BD□$ □$ □$ ( ( ( (

Two doors, two drawers, one vent, no shelvesDrawers are shallow heightFalse front between drawers

VDL36

VDL42

34-1/2& HIGH

34 1/2”

21”

RD AD FI FB ND IA BD□$ □$ □$ ( ( ( (

Two doors, two drawers, one vent, no shelves36! and 42! wideFalse vent between two shallow height drawers

VDL36BH

VDL42BH

34-1/2& HIGH (MANHATTAN CONSTRUCTION)

34 1/2”

21”

RD AD FI FB ND IA BD□$ □$ □$ ( ( ( (

Two doors, two drawers, one vent, no shelves36! and 42! wideFalse vent between two shallow height drawers

VDL36BH

VDL42BH

30-3/4& HIGH

21”

30 3/4”

12”, 15”, 18” & 21”

RD AD FI FB ND IA BD□$ □$ □$ ( ( ( (

Three drawersDrawers are 8-3/4! high

VD12

VD15

VD18

VD21

31-1/2& HIGH (MANHATTAN CONSTRUCTION)

21”

31 1/2”

12”, 15”, 18” & 21”

RD AD FI FB ND IA BD□$ □$ □$ ( ( ( (

Three drawersOne - 5-3/4! high drawerTwo - 10-3/8! high drawers

VD12

VD15

VD18

VD21

VANITIES4.5VANITY CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 47: Specification Catalog - Accent Building Products

34-1/2& HIGH

21”

34 1/2”

RD AD FI FB ND IA BD□$ □$ □$ ( ( ( (

Four drawers12!, 15!, 18!, and 21! wideTwo shallow height drawers and two tall height drawers

VD12BH

VD15BH

VD18BH

VD21BH

34-1/2& HIGH (MANHATTAN CONSTRUCTION)

21”

34 1/2”

RD AD FI FB ND IA BD□$ □$ □$ ( ( ( (

Four drawers12!, 15!, 18!, and 21! wideTwo - 5-3/4! high drawersTwo - 8-7/8! high drawers

VD12BH

VD15BH

VD18BH

VD21BH

18& Deep Vanities

18& DEEP

18”

30 3/4”

RD AD FI FB ND IA BD□$ □$ □$ ( ( ( (

Two full-height doors, no drawers, no shelves24!, 30!, 33!, and 36! wide

VL2418

VL3018

VL3318

VL3618

18& DEEP (MANHATTAN CONSTRUCTION)

18”

31 1/2”

RD AD FI FB ND IA BD□$ □$ □$ ( ( ( (

Two doors, no drawers, no shelves24!, 30!, 33!, and 36! wide

VL2418

VL3018

VL3318

VL3618

21& Deep Vanities

30-3/4& HIGH

30 3/4”

21”18”

RD AD FI FB ND IA BD( ( □$ ( ( ( (

Three drawers18! wideTop two drawers are 6-3/16! highBottom drawer is 13-3/4! highHanging hardware included

VFD18

VANI

TIES

4.6 VANITY CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 48: Specification Catalog - Accent Building Products

31-1/2& HIGH (MANHATTAN CONSTRUCTION)

31 1/2”

21”18”

RD AD FI FB ND IA BD( ( □$ ( ( ( (

Three drawersTop two drawers are 5-3/4! highBottom drawer is 15! highHanging hardware included

VFD18

Vanity Wall Cabinets

8& DEEP

8”

24”

40”

RD AD FI FB ND IA BD( ( ) □$ □$ ( (

Two doors, two shelvesOne shelf behind doors and one open shelf with towel rod beneath

VWS2440

8& DEEP (MANHATTAN CONSTRUCTION)

8”

24”

40”

RD AD FI FB ND IA BD( ( ) □$ □$ ( (

Two doors, two shelvesOne shelf behind doors and one open shelf with towel rod beneath

VWS2440

Miscellaneous

VANITY LAVATORY FRONT(MANHATTAN CONSTRUCTION)

24”, 30” & 36”4 7/8”

31 1/2”

Two doors, one vent

VLF24

VLF30

VLF36

VANITY DRAWER UNIT

24” / 30” 21”

6 1/2”

VDU24

VDU30

VANITIES4.7VANITY CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 49: Specification Catalog - Accent Building Products

VANITY DRAWER UNIT (MANHATTAN CONSTRUCTION)

24” / 30” 21”

6”

VDU24

VDU30

VANITY LEG

31”

21 3/4”

6 3/8”

Finished both sides, rounded edges

VLEGE

VANITY LEG (MANHATTAN CONSTRUCTION)

31 1/2”

21”

6”

Finished both sides, rounded edges

VLEGF

Vanity Tops

22& DEEP

4” ON CENTER

22”

Cultured marbleORDER SEPARATELY - Integral ovalbowl and backsplash. Oval bowlcentered with overflow.White on White

KC25

KC28

KC31

KC34

KC37

KC43

KC49

KC55

Left End Splash LES

Right End Splash RES

19& DEEP

19"

4" on center

Cultured marbleFor use withVL2418 VL3018VL3318 VL3618

MKC2519

MKC3119

MKC3419

MKC3719

VANI

TIES

4.8 VANITY CABINETS

High Point Cabinetry — 03/07/2011

)□$

!!

(

StandardAvailable with an UpchargeAvailable with ExceptionsNot Available

OPTIONSRDADFIND

Reduce DepthAdd DepthFinished InteriorNo Doors/No Drawers

AEIABDHA

Applied Overlay EndsInstalled AccessoriesBottom DrawersHandicap AccessibleRefer to page 0.10 for Door and Finish Availability Chart

Refer to page 0.14 for Modifications pricing

Page 50: Specification Catalog - Accent Building Products

Bookcases & DeskOrganizers

Installed Accessories

Fillers/Filler Boxes

Full & SplitTurnings

Corbels &Onlays

* Some items will not have a place for glaze hangup. These will be coated overall in glazefor color-blend consistency when a Frost or Ivory finish is chosen

using a Caramel or Chocolate glaze.

Reference page 7.2 for Filler and Spice Drawer Profiles

ACCESSORIES

High Point Cabinetry — Effective 03/07/2011

Page 51: Specification Catalog - Accent Building Products

Decorative Overlay Doors

DECORATIVE OVERLAY DOORS

Representativeof door shown

Overlay door sets for UC’s consist of one top doorand one bottom door - 24! deep UC’s need two sets

OVDW15

OVDW18

OVDW21

OVDW24

OVDW30

OVDW36

OVDW42

OVDB

OVDV

OVDVBH

OVDUC84S

OVDUC90S

OVDUC96S

END SKINS13! x 31!

13! x 43!

25! x 36!

13! x 97!

25! x 97!

ES13X31

ES13X43

ES25X36

ES13X97

ES25X97

OVE

RLAY

ENDS

&DO

ORS

5.2 OVERLAY DOORS

High Point Cabinetry — Effective 03/07/2011

Page 52: Specification Catalog - Accent Building Products

Stainless Steel Range Hoods

RANGE HOOD MODERN GLASS

10 3/32”16

35 7/16”

139

3/8”

40 5

/32”

- 58

21/

32”

11 11/32”

15 1/8”

15 3/4”

1 3/32”

RHMG36

RANGE HOOD CURVED GLASS

9 15/16”11 7/32”

35 7/16”

19 9/32”

4 11/32”

28 9

/16”

- 46

27/

32”

27 9

/16”

To be discontinued

RHCG36

RANGE HOOD MULTI LAYER

10 1/32”

15 3/4”

11 7/32”

35 7/16”19 1/2”

3 3/

4”

28 1

1/32

” - 4

6 21

/32”

27 3

/8”

RHM36

RANGE HOOD TRIAD

10 1/16”

1 9/

16”

11 7/32”

35 7/16”

19 11/16”

3 15

/16”

28 5

/32”

- 46

15/

32”

27 5

/32”

To be discontinued

RHT36

RANGE HOOD SLIM

10 1/16”

2 31

/32”

11 7/32”

35 7/16”

18 29/32”

27 5

/32”

- 45

15/

32”

26 3

/16”

RHS36

RANGE HOOD PYRAMID

10 1/16”

1 3/

32”

11 7/32”

35 7/16”

19 11/16”

3 15

/16”

27 9

/16”

- 45

7/1

6”

26 1

9/32

RHP36

HOO

DS5.3RANGE HOODS

High Point Cabinetry — Effective 03/07/2011

Page 53: Specification Catalog - Accent Building Products

RANGE HOOD ISLAND CURVED GLASS

11 3/16”12 29/32”

35 7/16”23 5/8”

27 3

/4”

- 42

1/8”

2 9/

16”

RHICG36

RANGE HOOD ISLAND MULTI LAYER

11 3/16”12 29/32”

35 7/16”23 5/8”

29 2

3/32

” - 4

4 3/

32”

3 25

/32”

RHIM36

FLUE EXTENSION

39 1/4”

11 1/4” 10”

For use with taller ceilings

RHEXT

HALOGEN REPLACEMENT BULBS

Not shown RHRL

HOO

DS5.4 RANGE HOODS

High Point Cabinetry — Effective 03/07/2011

Page 54: Specification Catalog - Accent Building Products

Heritage Collection Wood Range Hoods

ARCHED VALANCE

25”

20”

32”38”44”

Available in 30!, 36!, and 42!Independent Unit - must be attached to wall and cannotbe attached to adjacent cabinetsExhaust system is not includedFor use with blowerLiner and Ductless Kit also availableCheck local building codes for installation requirementsInstallation instructions and hardware are includedNo modifications available

RHA30

RHA36

RHA42

STRAIGHT VALANCE

23”

20”

32”38”44”

Available in 30!, 36!, and 42!Independent Unit - must be attached to wall and cannotbe attached to adjacent cabinetsExhaust system is not includedFor use with blowerLiner and Ductless Kit also availableCheck local building codes for installation requirementsInstallation instructions and hardware are includedNo modifications available

RHST30

RHST36

RHST42

CHIMNEY FOR HERITAGE COLLECTION

21 1/2”31 1/2”

11”14”20”26”

1/2! PlywoodAvailable in 31.5! and 21.5! heightsCan be used with 30!, 36!, and 42! straight and arched wood range hoodsTrimmable to desired height

RHC31/30

RHC31/36

RHC31/42

RHC21/30

RHC21/36

RHC21/42

If ordering: Then order:

Hood Chimney Blower Liner Ductless Kit (if needed)

RHA30or

RHST30

RHC31/30or

RHC21/30

RHBUSHL370or

RHBUDHL370

RHAL30 (arched)or

RHSTL30 (straight)

DKBUSHL370or

DKBUDHL370

RHA36or

RHST36

RHC31/36or

RHC21/36RHBUDHL710

RHAL36 (arched)or

RHSTL36 (straight)DKBUDHL710

RHA42or

RHST42

RHC31/42or

RHC21/42RHBUDHL710

RHAL42 (arched)or

RHSTL42 (straight)DKBUDHL710

HOO

DS5.5RANGE HOODS

High Point Cabinetry — Effective 03/07/2011

Page 55: Specification Catalog - Accent Building Products

LINERS

Purchased separatelyFor use in 30!, 36!, and 42! straightand arched wood range hoods30! Straight liner has two bracketsincluded for installationSilver Metallic

ARCHED RHAL30

RHAL36

RHAL42

STRAIGHT RHSTL30

RHSTL36

RHSTL42

BLOWERS

(Requires 1 - 50W Halogen Bulb)

(Requires 2 - 50W Halogen Bulbs)

(Requires 2 - 50W Halogen Bulbs)

Purchased separatelyThree speed options - max level 370 CFM and 710 CFMIdeal for use with a ventilating ductDuctless Kit is availableIncludes one removable dishwasher safe aluminum filterRequires halogen bulb(s) which can be purchased at any home storeInstallation instructions, warranty and repair information includedFor use with Heritage Collection Wood Range Hoods

RHBUSHL370

RHBUDHL370

RHBUDHL710

DUCTLESS KITS

Kit contains the following:Conversion ductDuctGrillCharcoal filter(s)Installation screws

DKBUSHL370

DKBUDHL370

DKBUDHL710

RANGE HOOD, BLOWER, DUCTLESS KIT

30”

ADJACENTCABINET

ADJACENTCABINET

24”

Tilts out for FramelessShould be ordered according to door style since doors are on the front

RH30FA

Includes housing, blower unit, damper, lights, (2) L-shaped filters, and motorspeed controls. Must ventRequired for use with RH30FAUses one filter included

RHBE

Not pictured DCK2

RANGE HOOD, BLOWER, DUCTLESS KITFOR WOOD LINES

24”

30”

Galley Rail shipped loose

RH30

Includes housing, blower unit, damper, lights, (2) L-shaped filters,and motor speed controls. Must ventRequired for use with RH30Will only work with RH30Will not work in Heritage Wood Hoods

RHB

Not pictured DCK1

HOO

DS5.6 RANGE HOODS

High Point Cabinetry — Effective 03/07/2011

Page 56: Specification Catalog - Accent Building Products

CORNER SHELF TOP PLATE

42”

12”6”

LH as shown

12”

30”/36”

6”

RH as shown

Designate LH or RH when ordering ALL white linesIn white lines, edges of the shelves are profiledCSTP126 has a square top shelf for use with crown moldings, and is finished onboth sides (not pictured)

CS630

CS636

CS642

CSTP126

BOOKCASES

24”, 30”, 36”

48”/52”/58”

12” Bookcases havea finished interiorand exterior. Bottom shelf isstationary andother 2 shelvesare adjustable.

Fixed shelf has a 2 3/4”facia board on front

17 1/2”from bottom

of facia boardto countertop

64”

Fixed shelfhas a 2 3/4”facia boardon front

24”, 30”, 36”12”

17 1/2”

from bottom of facia boardto countertop

Fixed bottom shelf and two adjustable shelves in 48!/52!/58! highFixed bottom shelf and three adjustable shelves in 64! highInterior is finished to match exterior

BC2448E

BC3048E

BC3648E

BC2452E

BC3052E

BC3652E

BC2458E

BC3058E

BC3658E

BC2464E

BC3064E

BC3664E

DESK ORGANIZERS

6”

12”

30”

6”

12”

36”

Interior finished to match exterior

DO30

DO36

WALL

ACCESSORIES

5.7WALL ACCESSORIES

High Point Cabinetry — Effective 03/07/2011

Page 57: Specification Catalog - Accent Building Products

SPICE DRAWER CABINET, WINE CUBE CABINET

12”18”, 24”,30”, 36”, 42”

6”

5 3/4”

5 3/4”

Cabinet shown horizontal withone spice drawer box, SPDBX

6”

18”,24”,30”,36”,42”

12”

*Specify species; M=Maple, C=Cherry18! wide spice drawer cabinet accepts three spice drawer boxes,24! wide accepts four boxes,30! wide accepts five boxes,36! wide accepts six boxes, and42! wide accepts seven boxesBoxes to be ordered separately as SPDBXAvailable in all finishesFinished both endsNot intended for end of run (staples and pinholes will show)Finished on side, top, and bottomDrawer boxes are ordered by door style

SPWC18

SPWC24

SPWC30

SPWC36

SPWC42

SPDBX

SCALLOPED WINE RACK

2 1/2”

36”

36”

Scalloped woodTrim in 3! increments

WR

STEMWARE HOLDER

36”

11 3/4”

1 5/8”

3-1/4! Moldings are mounted on 4! centers

SH

CORNER APPLIANCE HUTCH

12 1/4”

24”

CAH

18”

Finished on interior and exterior

CAHX

CORNER APPLIANCE HUTCH(MANHATTAN CONSTRUCTION)

12 1/4”

24”

CAH

18”

Finished on interior and exterior

CAHE

ROUND LAZY SUSAN SHELVES

For use in diagonal corner wall cabinetsDesignate White (W) or Almond (A) when ordering

2 - 20! Diagonal RLS30

2 - 20! Diagonal RLS36

3 - 20! Diagonal RLS42

WAL

LAC

CESS

ORI

ES5.8 WALL ACCESSORIES

High Point Cabinetry — Effective 03/07/2011

Page 58: Specification Catalog - Accent Building Products

ROLL OUT TRAYS

Order RTU same size as cabinetOne unit packed per boxStandard RTU’s are 7mil miter-foldvinyl tray with 2-1/2! sidesColor will be natural maple for woodlines and white for white linesDesigned for pantry base and utility cabinets that are 24! deep ONLYWill not fit vanity cabinetsPilasters are 20! tall and sit 1/4! from bottom of cabinetAccommodates three roll outs max per pilaster50 lb. capacity per tray

RT12

RT15

RT18

RT21

RT24

RT27

WOOD ROLL OUT TRAYS

Order WDRTU same size as cabinetOne unit packed per boxWood RT’s are a maple wood traywith 2-1/2! sidesDesigned for pantry base and utilitycabinets that are 24! deep ONLYWill not fit vanity cabinetsPilasters are 20! tall and sit 1/4! frombottom of cabinetAccommodates three roll outs maxper pilasterAll mounting fixtures included50 lb. capacity per tray

WRT12

WRT15

WRT18

WRT21

WRT24

WRT27

WRT30

WRT33

WRT36

BASEACCESSO

RIES5.9ROLL OUT TRAYS

High Point Cabinetry — Effective 03/07/2011

Page 59: Specification Catalog - Accent Building Products

SINGLE WASTE BASKET FOR 24& DEEP BASE

10 3/4”

36 QtSWB fits all base cabinets 12! wide and largerDoes not fit TB9, PB21, or PB24

SWB

DOUBLE WASTE BASKET FOR 24& DEEP BASE

11 5/8”

27 Qt per containerFits bases that are 15! wide and largerDoes not fit TB9, PB12, PB24, or PB27

DWB

DOOR MOUNTING KIT FOR 24& DEEP BASE

Drawing not shown DMK

35 QT SINGLE WASTE BIN

19 1/4”

22 5/8”

35 qtcontainerincluded

6” Dove-tailed construction

12”

Full ext for PB15 and upWill not work in PB27; opening is too smallAll mounting hardware and DMK includedFeatures soft-close open & close

WDSWB35

35 QT DOUBLE WASTE BIN

2 - 35 qtcontainersincluded

19 1/4”

6” Dove-tailed construction

22 5/8”

14 1/4”

Full ext for PB18 and upWill not work in PB30; opening is too smallAll mounting hardware and DMK includedFeatures soft-close open & close

WDDWB35

CUTLERY TRAY

Plastic - 16! x 21!Trim to fit drawers in 18! base cabinets

CT18

BASE

ACCE

SSO

RIES

5.10 BASE ACCESSORIES

High Point Cabinetry — Effective 03/07/2011

Page 60: Specification Catalog - Accent Building Products

DRAWER INSERT ACCESSORIES

14! Wood Cutlery TrayFor use in 15! and 18! cabinets

20! Wood Cutlery TrayFor use in 21! and 24! cabinets

18! Wood Utility TrayFor use in 12!, 18!, 21!, and 24! cabinets

18! Spice Drawer InsertFor use in 18! and 21! cabinets

WDCT14

WDCT20

WDUT18

WDSI18

CORNER PULLOUT ORGANIZERS

LeMans Corner Pullout - R (Right Pull)

LeMans Corner Pullout - L (Left Pull)

Will work in both framed and frameless cabinetsSee drawing and chart below

LBCP4851R

LBCP4851L

Framed CabinetAA

Right Pull

Left-hand cornerbase shown

Right-hand cornerbase shown

Left PullB B

CC

A B

Framed Cabinet

C

Frameless Cabinet

C

INCHES (mm) INCHES (mm) INCHES (mm) INCHES (mm)

min. 33-1/2 (851) min. 21 (533) 15-16 (381-406) 16-17 (406-432)

min. 34-1/2 (876) min. 21 (533) 18-19 (457-483) 19-20 (483-508)

min. 39-1/2 (1003) min. 21 (533) 21-22 (533-559) 22-23 (559-584)

Inside dimension (clearance height) for all cabinets: min. 28 inches (711 mm)

BASEACCESSO

RIES5.11BASE ACCESSORIES

High Point Cabinetry — Effective 03/07/2011

Page 61: Specification Catalog - Accent Building Products

SHELF KITS FOR UTILITY CABINETS

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

UC3S1812X

UC3S1824X

UC3S2412X

UC3S2424X

SHELF KITS FOR UTILITY CABINETS(MANHATTAN CONSTRUCTION)

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

3 - Shelves with Supports

UC3S1512

UC3S1524

UC3S1812

UC3S1824

UC3S2412

UC3S2424

UC3S3012

UC3S3024

UC3S3612

UC3S3624

PANTRY ROLL OUTS

Fits UC1824Mount left or right side of cabinetBaskets are 3! apartAvailable in white only

Fits UC2424Mount in center onlyBaskets are 3! apartAvailable in white only

White PROS

White PROD

TALL

ACCE

SSO

RIES

5.12 TALL ACCESSORIES

High Point Cabinetry — Effective 03/07/2011

Page 62: Specification Catalog - Accent Building Products

Filler Boxes

WALL FILLER BOXES - PLAIN

12”15”18”21”24”27”30”36”42”

15”

Filler boxes are 5/8! thick veneered plywood endpanels joined together with grooved and dadoconstructionAll are 3! wideEdges are unfinished

WFB12

WFB15

WFB18

WFB21

WFB24

WFB27

WFB30

WFB36

WFB42

BASE FILLER BOXES - PLAIN

34 1/2”

27”

Filler boxes are 5/8! thick veneered plywood endpanels joined together with grooved and dado constructionAll are 3! wideEdges are unfinished

BFB3

VANITY FILLER BOXES - PLAIN

24”

30 3/4”31 1/2”

&34 1/2”

Filler boxes are 5/8! thick veneered plywood endpanels joined together with grooved and dado constructionAll are 3! wideEdges are unfinished

VFB3

VFBBH3

TALL FILLER BOXES - PLAIN

84” 90”& 96”

15” & 27”

Filler boxes are 5/8! thick veneered plywood endpanels joined together with grooved and dado constructionAll are 3! wideEdges are unfinished

TFB8415

TFB9015

TFB9615

TFB8427

TFB9027

TFB9627

WALL FILLER BOXES - FLUTED

12”15”18”21”24”27”30”36”42”

15”

Fluted filler boxes are 5/8! thick veneeredplywood end panels joined together withgrooved and dado constructionThey are the same as plain filler boxesbut with a fluted fillerAll are 3! wideEdges are unfinished

WFC12

WFC15

WFC18

WFC21

WFC24

WFC27

WFC30

WFC36

WFC42

BASE FILLER BOXES - FLUTED

34 1/2”

27”

Fluted filler boxes are 5/8! thick veneered plywood endpanels joined together with grooved and dado constructionThey are the same as plain filler boxes but with a fluted fillerAll are 3! wideEdges are unfinished

BFC3

FILLERS5.13FILLERS

High Point Cabinetry — Effective 03/07/2011

Page 63: Specification Catalog - Accent Building Products

VANITY FILLER BOXES - FLUTED

24”

30 3/4”

34 1/2”

31 1/2” &

Fluted filler boxes are 5/8! thick veneered plywood endpanels joined together with grooved and dado constructionThey are the same as plain filler boxes but with a fluted fillerAll are 3! wideEdges are unfinished

VFC3

VFCBH3

TALL FILLER BOXES - FLUTED

15” & 27”

84” 90”& 96”

Fluted filler boxes are 5/8! thick veneered plywood endpanels joined together with grooved and dado constructionThey are the same as plain filler boxes but with a fluted fillerAll are 3! wideEdges are unfinished

TFC8415

TFC9015

TFC9615

TFC8427

TFC9027

TFC9627

WALL FILLER BOXES - PROFILED

15” 12”15”18”21”24”27”30”36”42”

Filler boxes are 5/8! thick veneeredplywood end panels joined together withgrooved and dado constructionAll are 3! wideEdges are unfinished

WPC12

WPC15

WPC18

WPC21

WPC24

WPC27

WPC30

WPC36

WPC42

BASE FILLER BOXES - PROFILED

34 1/2”

27”

Filler boxes are 5/8! thick veneered plywood endpanels joined together with grooved and dado constructionAll are 3! wideEdges are unfinished

BPC3

VANITY FILLER BOXES - PROFILED

24”

30 3/4”

34 1/2”

31 1/2” &

Filler boxes are 5/8! thick veneered plywood endpanels joined together with grooved and dado constructionAll are 3! wideEdges are unfinished

VPC3

VPCBH3

TALL FILLER BOXES - PROFILED

15” & 27”

Filler boxes are 5/8! thick veneered plywood endpanels joined together with grooved and dado constructionAll are 3! wideEdges are unfinished

TPC8415

TPC9015

TPC9615

TPC8427

TPC9027

TPC9627

FILL

ERS

5.14 FILLERS

High Point Cabinetry — Effective 03/07/2011

Page 64: Specification Catalog - Accent Building Products

Wall Fillers

5/8& LAMINATE WALL FILLERS WITH OVERLAY

3”

12”15”18”24”30”36”42”

FS3For Manhattan, orderas FS330

FS312

FS315

FS318

FS324

FS336

FS342

3/4& WOOD WALL FILLER - FLAT

36”42”

6” 1”

36”42”

Solid Wood - 3/4! thick

FS1361! wide

FS1421! wide

FS6366! wide

FS6426! wide

5/8& LAMINATE WALL FILLERS - FLAT

30”/36”/42”

3” FF330

FF336

FF342

5/8& LAMINATE WALL FILLERS - FLAT

3”

30”/36”/42”

FS3FFor Manhattan, orderas FS330F

FS336F

FS342F

Wall, Base & Vanity Fillers

5/8& CORNER LAMINATE WALL FILLERSWITH OVERLAY

3”3”

30”36”42”

CWF3For Manhattan, orderas CWF330

CWF336

CWF342

5/8& CORNER LAMINATE WALL FILLERS - FLAT

3” 3”

30”/36”/42”

CWF3FFor Manhattan, orderas CWF330F

CWF336F

CWF342F

34-1/2& HIGH LAMINATE BASE FILLERS

34 1/2”

3” / 6”

34 1/2”

3” / 6”

w/overlay flat

BF3

BF6

BF3F

BF6F

34-1/2& HIGH CORNER LAMINATE BASE FILLERS

34 1/2”

3”

34 1/2”

3”

w/overlay flat

CBF3X3

CBF3X3F

FILLERS5.15FILLERS

High Point Cabinetry — Effective 03/07/2011

Page 65: Specification Catalog - Accent Building Products

30-3/4& & 31-1/2& HIGH 5/8& LAMINATEVANITY BASE FILLERS

30 3/4”/31 1/2”

3”

31 1/2”30 3/4”/

3”

w/overlay flat

VBF3

VBF3F

Tall Fillers

5/8& LAMINATE TALL FILLERS

84”90”96”

3”

84”90”96”

3”

w/overlay flat

Filler aligns with top door panel and bottom door panel

TF84F

TF90F

TF96F

TF84

TF90

TF96

TALL FILLERS (MANHATTAN CONSTRUCTION)

3”3”

96”

84”90”

84”90”96”

w/overlay flat

Filler aligns with top door panel and bottom door panel

TF384F

TF390F

TF396F

TF384

TF390

TF396

Fluted Fillers

WALL FLUTED FILLERS - WOOD

12”15”18”24”30”36”42”

1 1/2”

1 1/2”3”

3/4”

3”

Section View

FS312FL

FS315FL

FS318FL

FS324FL

FS330FL

FS336FL

FS342FL

BASE FLUTED FILLERS - WOOD

1 1/2”

6”

3”

34 1/2”

Base Fluted Filler

BF3FL

BASE ANGLE FLUTED FILLERS - WOOD

30” &27”

2”

2”

3”

Base angle

3/4”

3”

3”

4 3/4”

Section view

BAF3FLFor Manhattan, orderas BAF330FL

BAF327FL

FILL

ERS

5.16 FILLERS

High Point Cabinetry — Effective 03/07/2011

Page 66: Specification Catalog - Accent Building Products

VANITY FLUTED FILLERS - WOOD

1 1/2”

6”

3”

34 1/2”

Vanity Fluted Filler

VBF3FL

TALL FLUTED FILLERS - WOOD

84”90”96”

6”

1 1/2”

3”

Filler aligns with top door panel and bottom door panel

FS384FL

FS390FL

FS396FL

Miscellaneous

SCRIBE FILLER WALL

30”/36”/42”

3”

Filler profiled on three sidesNot available in Cascade

SFW30For Manhattan, orderas SFW330

SFW36For Manhattan, orderas SFW336

SFW42For Manhattan, orderas SFW342

SCRIBE FILLER BASE

34 1/2”

3”

Filler profiled on three sidesNot available in Cascade

SFBFor Manhattan, orderas SFB3

REFRIGERATOR END PANEL

96”

24 3/4”

5/8! thickBoth sides finished and edgebanded on both long edges

REP96

DISHWASHER END PANEL

34 1/2”

24 3/4”

3”

34 1/2”

24 3/4”

3”

5/8! thickOne side finished

DWE3

DWE3F

FILLERS5.17FILLERS

High Point Cabinetry — Effective 03/07/2011

Page 67: Specification Catalog - Accent Building Products

DISHWASHER END PANEL(MANHATTAN CONSTRUCTION)

34 1/2”

24 3/4”

3”

34 1/2”

24 3/4” 3”

5/8! thickOne side finished

DWE3

DWE3F

SINK FRONT END PANEL

34 1/2”

24 3/4”

5/8! thickVeneerFinished on two sides and edgebanded on one 34-1/2! sideIf white, will be melamine

SFE

FILL

ERS

5.18 FILLERS

High Point Cabinetry — Effective 03/07/2011

Page 68: Specification Catalog - Accent Building Products

Laminate & Wood Moldings

LAMINATE MOLDINGS - FOR WHITE LINES ONLY

1 1/4”

1 1/4”

5/16”

15/16”

15/16”

5/16”

WCR968* pc. Outside Corner

WCR96 BoxBox 48* Outside Corner

1/4”

1 1/4”

WSM968* pc. Cap 1-1/4!

WSM96 BoxBox 48* Cap 1-1/4!

2 1/2”

1/2”1 1/2”

1/2”WST968* pc. Scribe Trim

WST96 BoxBox 48* Scribe Trim

3/4”

2”

3/4”

1 1/2”WLB968* pc. Light Bar

WLB96 BoxBox 48* Light Bar

3/4”

3/4”WRC968* pc. Radius Corner

WRC96 BoxBox 48* Radius Corner

Wood Moldings

WOOD MOLDINGS

7/32”

11/16”

SM968* pc. Scribe 11/16!

SM96 BoxBox 48* Scribe 11/16!

5/16”

1 1/4”

CM968* pc. Cap 1-1/4!

CM96 BoxBox 48* Cap 1-1/4!

1/4"

1"

3/4"

1/4”3/4”

1”

CR968* pc. Outside Corner

CR96 BoxBox 48* Outside Corner

WOOD MOLDINGS

3/4”

1/4” 1/2”SCR968* pc. Small OutsideCorner

SCR96 BoxBox 48* Small OutsideCorner

3/4”

1/4” CV968* pc. Cove

CV96 BoxBox 48* Cove

1/4”

3/4”

BM968* pc. Batten

BM96 BoxBox 48* Batten

3/4"

2 1/8"2 1/8”

GR968* pc. Galley Rail

GR96 BoxBox 48* Galley Rail

3/4”

1 3/4”

CTEM968* pc. Counter Top Edge

CTEM96 BoxBox 48* Counter Top Edge

1 1/8”

1/2”11/16”

SF968* pc. Soffit

SF96 BoxBox 48* Soffit

SF14412* pc. Soffit

SF144 BoxBox 36* Soffit

2”

3/4”

3/4”

3/4”

LB968* pc. Light Bar

LB96 BoxBox 48* Light Bar

MO

LDINGS

5.19MOLDINGS

High Point Cabinetry — Effective 03/07/2011

Page 69: Specification Catalog - Accent Building Products

WOOD MOLDINGS

3”

2 3/16”

WCWN968* pc. Crown

WCWN96 BoxBox 48* Crown

WCWN14412* pc. Crown

WCWN144 BoxBox 36* Crown

11/16”

11/16”

SBM968* pc. Shoe Base

SBM96 BoxBox 48* Shoe Base

3/4”RM968* pc. Rope Strip

RM96 BoxBox 48* Rope Strip

3/4”

DM968* pc. Dentil Strip

DM96 BoxBox 48* Dentil Strip

4 3/16”

2 5/8”3 5/8”

BCWN96C8* pc. Beaded Crown

BCWN96C BoxBox 48* Beaded Crown

BCWN144C12* pc. Beaded Crown

BCWN144C BoxBox 36* Beaded Crown

4 1/16”

3 5/

16”

4 1/8”

UCWN96C8* pc. Universal Crown

UCWN96C BoxBox 48* Universal Crown

UCWN144C12* pc. Universal Crown

UCWN144C BoxBox 36* Universal Crown

WOOD MOLDINGS

2 3/4”

2”

1/2”SCM96C8* pc. Shaker Crown

SCM96C BoxBox 48* Shaker Crown

SCM144C12* pc. Shaker Crown

SCM144C BoxBox 36* Shaker Crown

3/4”

3 5/8”

2 5/8”

LCWN968* pc. Large CrownMolding w/Heel

LCWN14412* pc. Large CrownMolding w/Heel

1 3/4”

1 1/2”

2 3/8”

7/8”

1 5/16”1/2”

R 5/8”

5/8”

RLR968* pc. Radius LightRail Molding

RLR14412* pc. Radius LightRail Molding

3”

3/4”

R 1/4” typ.

TBSM968* pc. Triple BeadStacked Molding

TBSM14412* pc. Triple BeadStacked Molding

MO

LDIN

GS

5.20 MOLDINGS

High Point Cabinetry — Effective 03/07/2011

Page 70: Specification Catalog - Accent Building Products

Valances

SCALLOPED VALANCE

48” / 72”

4 1/2”

3/4! Solid WoodAvailable in Wood lines only

SSCV48

SSCV72

VALANCE - 3/4& LAMINATE & SOLID WOOD

6”

48”/ 72”/ 96”

RV’s have profiled edgeWhite lines are laminateWood lines are species specificRV96 not available in wood lines

RV48

RV72

RV96

5/8& WHITE SOLID LAMINATE

48” / 72”

6”

Available in Cascade only

WSV48

WSV72

FRIEZE VALANCE

48! Trimmable to 31-1/2! FV48

72! Trimmable to 54!

48” / 72”

5”

3/4! Solid WoodAvailable in all lines except Cascade

FV72

ARCHED VALANCE

3”

SKU Dim “A” Dim “B” Dim “C”Arched Valance’s

Dim “C”Dim

“B

2 5/16”

2 1/2”Dim “A” 2 5/16”

AV30 30.0” 12.5” 4.5”AV36 36.0” 12.5”AV48 48.0” 15.5”AV54 54.0” 15.5”AV60 60.0” 18.5”

4.5”4.5”4.5”4.5”

Trimmable up to 2! on each side

AV30

AV36

AV42

AV48

AV54

AV60

Aprons

SCALLOPED FURNITURE APRON

38”, 44”, 50”

4 5/8”

4” 4”

Available in all finishes3/4! thick*Specify species; M=Maple, C=Cherry

FA38Trimmable to 36!

FA44Trimmable to 42!

FA50Trimmable to 48!

ARCHED FURNITURE APRON

4 5/8”

20”, 26”, 32”

4”

Available in all finishes3/4! thick*Specify species; M=Maple, C=Cherry

FA20Trimmable to 18!

FA26Trimmable to 24!

FA32Trimmable to 30!

Onlays & Corbels

ACANTHUS ONLAYS

20”5/8”

4 1/2”

LONLAYALarge Onlay

2 7/8”

2 9/16” 1 9/16”

5”

ONLAYA3Small Ornament

5 1/8”

3 3/4”

4 1/2”

1 9/16”

*Specify species; M=Maple, C=Cherry

ONLAYA6Large Ornament

DECORATIVE

ACCENTS5.21DECORATIVE ACCENTS

High Point Cabinetry — Effective 03/07/2011

Page 71: Specification Catalog - Accent Building Products

GRAPE ONLAYS

5/8”

3 5/8”

3 3/16”

SONLAYGRSmall

4 1/2”

20” 5/8”

LONLAYGRLarge

3 1/2”

2 5/16”5/8”

Easy to apply with woodworking glue or a small bradAvailable in all finishes*Specify species; M=Maple, C=Cherry

GRCLGrape Cluster

GRAPE CORBELS

116 mm(4 9/16”)

22 mm(7/8”)

146 mm(5 3/4”)

139 mm(5 1/2”)

154 mm(6 1/16”)

225 mm(8 7/8”)

GRCOR9Small

51 mm(2”)

73 mm(2 7/8”)

22 mm(7/8”)

225 mm(8 7/8”)

234 mm(9 3/16”)

324 mm(12 3/4”)

GRCOR13Medium

111(4 3/8”)

133(5 1/4”)

102(4”)

305(12”)

610(24”)

Wood corbels can be mounted with keyhole plates provided and pre-attachedIf using the keyhole plates, use #8 or larger screws

GRCOR24Large

DECO

RATI

VEAC

CENT

S5.22 DECORATIVE ACCENTS

High Point Cabinetry — Effective 03/07/2011

Page 72: Specification Catalog - Accent Building Products

ACANTHUS CORBELS

146 mm(5 3/4”)

116 mm(4 9/16”)

22 mm(7/8”)

154 mm(6 1/16”)

139 mm(5 1/2”)

228 mm(9”)

ACOR9Small

234 mm(9 3/16”)

50 mm(2”)

73 mm(2 7/8”)

22 mm(7/8”) 330 mm

(13”)

225 mm(8 7/8”)

ACOR13Medium

111(4 3/8”)

123(5 1/4”)

102(4”)

610(24”)

305(12”)

ACOR24Large

ROSETTE

3! x 3! x 3/4!Solid Wood

ROS3

DECORATIVE COUNTER BRACKET

3”6”/9”/11”

6”/9”/11”

DCB6

DCB9

DCB11

Furniture Feet & Turnings

FURNITURE FEET

4 5/8”

1 3/4”

3” 3 1/2”

4 5/8”

Apple Foot Tulip Foot

Available in all finishesSOLD INDIVIDUALLY*Specify species; M=Maple, C=Cherry

APL

TLL

2-SIDED TAPER LEG

*Specify species; M=Maple, C=Cherry

TLG

FULL TURNING - PLAIN

35 1/4”

3 1/2” – 4 1/2”

7 1/4”

Available in all finishes*Specify species; M=Maple, C=Cherry

PFT33-1/2!

PFT44-1/2!

DECORATIVE

ACCENTS5.23DECORATIVE ACCENTS

High Point Cabinetry — Effective 03/07/2011

Page 73: Specification Catalog - Accent Building Products

FULL WOOD TURNING - PLAIN

2 13/16”

2 13/16”

7 1/2”

34 1/2”

4 1/2”

*Specify species; M=Maple, C=Cherry

PFT2

FULL TURNING - REEDED

35

3 1/2” – 4 1/2”

1/4”

1/4”

Available in all finishes16 Reeds on 3-1/2!20 Reeds on 4-1/2!*Specify species; M=Maple, C=Cherry

RFT33-1/2!

RFT44-1/2!

SPLIT TURNING END POST

8”

2 1/2”

5 1/2”

*Specify species; M=Maple, C=Cherry

PST

SPLIT WOOD TURNING

7 1/2

2 13/16

1 3/8

34 1/2

4 1/2

*Specify species; M=Maple, C=Cherry

PST2

SPLIT TURNING - PLAIN

30”42”84”

5/8”

1 7/8”

Available in all finishes*Specify species; M=Maple, C=Cherry

PST30

PST42

PST84

SPLIT TURNING - REEDED

30”42”84”

5/8”

1 7/8”

Available in all finishes*Specify species; M=Maple, C=CherryCannot be used by itself

RST30

RST42

RST84

DECO

RATI

VEAC

CENT

S5.24 DECORATIVE ACCENTS

High Point Cabinetry — Effective 03/07/2011

Page 74: Specification Catalog - Accent Building Products

Panels

FINISHED OVERLAY END PANEL - LAMINATE

Edge Banded3 Sides34 1/2”

96” FP96X34

FINISHED OVERLAY END PANEL - 3/16& PLYWOOD

Horizontal grain

96”

34 1/2”

FPGRAIN

FP96X34

Vertical grain34 1/2”&48”

96”

FPC

GR

AIN

All are 3/16! PlywoodFinished panels for Onyx and Ivory are crossgrainGrain runs with the length

FPC34X96

FPC48X96

BEAD BOARD PANEL

96” X 48”

96”

48”

BBP96X48

DECORATIVE

ACCENTS5.25DECORATIVE ACCENTS

High Point Cabinetry — Effective 03/07/2011

Page 75: Specification Catalog - Accent Building Products

LOOSE SHELVING - MAPLE VENEER MDF

11 1/2”

Finished on two surfaces and front edge

LS4848! x 11-1/2! x 3/4!

LS9696! x 11-1/2! x 3/4!

TOE PLATE COVER - 96& x 4& x 3/16&

Single 8* pc. TP96

Box 48’ with 6 pcs.

For white lines, it is 3/8! thickOne side is white and one side is black

TP96 Box

TOE PLATE CAP

Not shownSold in boxes of 25

TPC-White (WHT)

TPC-Black (BLK)

RANGE TOE PLATE

15”30”

4”

1 3/4”

RTP30X

RANGE TOE PLATE (MANHATTAN CONSTRUCTION)

15”30”

4 1/2”

3 1/2”

RTP30E

HEAT SHIELDS

18 gauge steel with white powder coat finish1-9/16! x 30!Sold two per package

HS2

TOUCH-UP KIT

Contains: Liquid finish in brush-top bottle,soft filler stick and felt touch-up marker

TUK

TOUCH-UP AEROSOL SPRAY AND STAIN

HAZMAT charges do applyRequired by DOT, Regulation HM126FHazmat certification is required if anindividual is picking up

Quart Stain

Aerosol Spray

MIS

CELL

ANEO

US5.26 MISCELLANEOUS

High Point Cabinetry — Effective 03/07/2011

Page 76: Specification Catalog - Accent Building Products

CARE AND MAINTENANCE OF MARSH CABINETS

WOOD SURFACES

For normal cleaning use a clean soft cloth dampened with a mild solution of two drops of dishwashing liquid perone gallon of water.

Dry off thoroughly, removing any excess moisture.

DO NOT USE STRONG DETERGENTS, SOLVENTS, OR ABRASIVE CLEANERS.

Do not use a dish cloth on cabinet surfaces.

THERMOFOIL AND MELAMINE SURFACES

For normal cleaning use a clean soft cloth dampened with a mild solution of two drops of dishwashing liquid perone gallon of water.

Dry off thoroughly, removing any excess moisture.

DO NOT USE STRONG DETERGENTS, SOLVENTS, OR ABRASIVE CLEANERS.

Do not use a dish cloth on cabinet surfaces.

All non-abrasive household cleaners may be used. Examples: Simple Green, Formula 409, etc.

When using a self-cleaning oven, opening all the adjacent doors and drawers or using heat shields isrecommended. This is to help prevent damage and discoloration of the cabinets.

MOISTURE FROM STEAM AND HOT WATER PRESENT IN KITCHENS SHOULD BE KEPT OFF OF ALLCABINETS. IF CABINETS DO GET WET, DRY THEM BY WIPING WITH A CLEAN SOFT DRY CLOTH TOMAINTAIN FINISH.

ADDITIONAL

INFORM

ATION

7.1

High Point Cabinetry — Effective 03/07/2011

Page 77: Specification Catalog - Accent Building Products

PROFILES FOR GL DOORS AND FILLER BOXES

Rosewood 1/2& Rab

Windsor1/2& Rab

Shaker &Mission

9/16& Rab

ADDI

TIO

NAL

INFO

RMAT

ION

7.2

High Point Cabinetry — Effective 03/07/2011