Specalog for M316C Wheel Excavator, AEHQ5532-01 · 2 M316C Wheel Excavator The C Series incorporates innovations for improved performance and versatility. Increased lifting capacity,

®®

EngineEngine Model Cat® 3056E ATAACNet Power 103 kW 138 hp

WeightsOperating Weight 16 300 kg (35,935 lb)

to 18 200 kg (40,120 lb)Transmission

Maximum Travel Speed 34 km/h 21 mph

M316CWheel Excavator

2

M316C Wheel ExcavatorThe C Series incorporates innovations for improved performance and versatility.

Increased lifting capacity, improvedcycle times and ease of operation leadto increased productivity and loweroperating costs.

Serviceability

All daily maintenance points areaccessible from ground level.A centralized greasing system allowslubrication of critical points. pg. 12

✔

Buckets and Work Tools

Buckets, grapples, hammers, and quickcouplers provide a total solution packageto the end-user. Built for performanceand durability these tools deliver highproductivity, long service life andexcellent value. pg. 11

Operator Station

The new operator station designmaximizes operator comfort andvisibility. Standard features such asergonomic joysticks, soft switch paneland new monitor are some of thefeatures that help allow the operatorto work comfortably and efficientlythroughout the work day. pg. 6

✔

Hydraulics

The hydraulic system, featuring aseparate swing pump and load-sensingsystem, provides maximum power andexceptional controllability. The newadjustable hydraulic sensitivity allowsadjustment of attachments to find thebest setup for any application. pg. 5

✔

Engine

The new Cat 3056E DIT ATAACelectronically controlled engineprovides increased horsepower.Performance, reliability, durability,excellent fuel economy, and lowsound levels help maximize workingefficiency. The engine is U.S. EPATier 2 emission certified. pg. 4

✔

✔ New Feature

3

Complete Customer Support

Your Cat dealer offers a wide rangeof services that can be set up under acustomer support agreement when youpurchase your equipment. The dealerwill help you choose a plan that cancover everything from machine andattachment selection to replacement.pg. 15

Environmentally Responsible Design

Helping to protect our environment, theengine has low operator and spectatorsound levels, longer filter change intervalsand is more fuel efficient. pg. 14

✔

Booms and Sticks

The box section design of all front endstructures provides the strength neededfor even the toughest applications.Multiple boom and stick options allowyou to pick the best match for your job.pg. 10

✔

Undercarriage

Pin-On design of outriggers and dozerblade allows for interchangeability.Heavy-duty cylinder protection andbox section design provide excellentdurability. pg. 9

Ease of Operation

The new Joystick Steering allows theoperator both to work with implementsand maneuver the machine withoutusing the steering wheel. This providessignificant improvement in operatorcomfort and productivity. pg. 8

✔

Powerful Performance. The 3056E DITATAAC engine delivers a net power of103 kW (138 hp) at the rated speed of2,000 rpm, and meets U.S. EPA Tier 2emission standards.

Turbocharged and Air-to-AirAftercooled. The turbocharger packsdense air into the cylinders for morecomplete combustion, lower emissionimproving performance and engineefficiency. The air-to-air aftercoolerreduces smoke and emissions byproviding cooler inlet air forefficient combustion.

Cooling System. Features an electronicallycontrolled variable speed on-demandfan. Driven by a hydraulic motor, fanspeed is determined by engine coolant,transmission oil, hydraulic oil and inletmanifold temperature. Cooler operatingconditions allow lower average fanspeeds resulting in reduced fuelconsumption and lower noise levels.The electronic engine controlcontinuously compensates for this fanload, providing consistent net horsepower,regardless of operating conditions.

Engine Oil. Caterpillar® engine oil isformulated to optimize engine life andperformance and is recommended foruse in Cat diesel engines. The engineoil change interval has been increasedto 500 hours.

Low Sound, Low Vibration. The 3056Edesign improves operator comfort byreducing sound and vibration.

• Operator sound level, LPA, 72 db(A)

• Spectator sound level, LWA,102 db(A)

Fuel Injection Pump. The new injectionpump is electronically controlled andhelps to reduce fuel consumption.

Service. The engine is longitudinallymounted on the right side to provideeasy access from ground level to theoil filter, oil filler, oil drain valve, fuelfilter, V-belt tightener, and oil dipstick.

4

EngineBuilt for power, reliability, low maintenance, excellent fuel economy and low emissions.

Hydraulic Pumps. The closed centerhydraulic system provides peak flowand pressure at any engine speed, foroptimum digging force with preciseimplement controllability. In additionto the main hydraulic pump, a dedicatedhydraulic pumps for swing, cooling fanmotor and pilot systems ensure best inclass performance.

Proportional Auxiliary Hydraulics.Versatility of the hydraulic system canbe expanded to utilize a wide varietyof hydraulic work tools using multiplevalve options.

High Pressure Auxiliary Circuit

• The Multi-function Valve is thecore of the Tool Control System.This system allows an operator toselect up to five pre-programmedwork tools from the monitor.These preset hydraulic parameterssupport either one-way flow ortwo-way flow.

• The dedicated Hammer FunctionValve is the best option for machinesthat will only require single directionflow and do not require the flexibilityprovided by the Multi-function Valve.

Medium Pressure Function Valve

• The Medium Pressure FunctionValve provides proportional flowthat is ideal for tilting buckets orrotating tools.

Stick Regeneration Circuit. The stickregeneration circuit increases efficiencyand controllability for higher productivityand lower operating costs.

Hydraulic Cylinder Snubbers.The hydraulic cylinder snubbers at rodend of boom cylinders, both ends ofstick cylinders and bucket cylinder rodend cushion shocks, reduce sound andincrease cylinder life.

Caterpillar XT-6™ ES Hoses. To meetthe critical flexibility and strengthdemands of wheel excavator applications,XT-6 ES hoses are installed in the highpressure hydraulic system.

Caterpillar Hydraulic Oil. Maximumprotection in all hydraulic systemsagainst mechanical wear and corrosion.Its high zinc content reduces wear, andextends pump life. Provided certainrequirements are met (e.g. S•O•SSM

analysis every 500 hours), the hydraulicoil change interval is extended from2,000 hours to 4,000 hours.

5

HydraulicsFast cycle times, increased lift capacity and high bucket and stick forces combineto maximize your productivity in any job.

6

The interior layout maximizes operator space, provides exceptional comfort and reducesoperator fatigue.

Operator Station

Interior Operator Station. The operatorstation is quiet with conveniently placedcontrols, low lever and pedal effort,ergonomic seat design and highlyeffective ventilation.

Seat. A new seat with a two-tone colordesign offers adjustable back rest,lumbar support, seat cushion lengthand angle. The optional comfort seatwith air suspension and seat heatingautomatically adjusts to theoperator’s weight.

Consoles. Designed for simplicity andfunctionality. The left side console istiltable for excellent access to the cab.Dozer blade and/or outrigger controlsas well as the radio-off switch arelocated on the left console.

Automatic Climate Control.Fully automatic climate controladjusts temperature and air flow.

Control Convenience. Each control isplaced within easy reach of the operator.Joysticks control the implementfunctions, steer the machine while infirst gear and activate the adjustablehydraulic sensitivity. The soft switchpanel controls the oscillating axle,power control settings, parking brake,automatic engine speed control, andother hydraulic functions.

Foot Pedals. Two-way pedals for traveland auxiliary circuits give more floorspace and reduce the need to changepositions. The foot pedal for auxiliaryhigh-pressure circuit can now be lockedin the off position and is used as afootrest for greater operator comfort.

Cab Mounts. The cab shell is attachedto the frame with viscous mounts,reducing vibration and sound.

Viewing Area. There is excellentviewing area through wide windowssurrounding the operator. The lower ofthe two-piece window can be openedseparately for better air ventilation or beslid into the upper window to completelyopen the front bay. Both front windowoptions are equipped with a multi-positionsunscreen. An optional one-piecewindow is available.

Skylight. A unique large polycarbonateskylight provides excellent upwardvisibility.

Wipers. The parallel wiper systemis designed to maximize visibility.

Large Storage Compartment. A largestorage space behind the seat withoptional cover, provides sufficientroom for a lunch box.

Easy Access. Conveniently located grabirons and large steps mounted to theundercarriage, together with a tiltablesteering column and tiltable left sideconsole, provide easy access to the cab.

7

Monitor. The new, compact monitorenhances viewing while displaying avariety of language-based informationthat is easy to read and understand.

– Pre-start system alerts the operator tolow coolant and hydraulic oil levelsprior to starting.

– Filter and oil change warnings aredisplayed when the number of hoursreaches the maintenance interval.

– Tool select function allows theoperator to select a pre-definedhydraulic work tool.

– Adjustable braking characteristicsenables an operator to select three levelsof travel motor retarder aggressivenesswhen releasing the travel pedal.

– 23 different languages are availableon the M316C.

Joystick Steering. Enables an operatorto reposition the machine in the firstgear while simultaneously workingwith the implements, keeping bothhands on the joysticks. The operatoris more productive using this feature.

Power Control Settings. Three modesallow the operator to choose the optimumengine and hydraulic power setting.

• Economy mode provides the bestfuel efficiency allowing lowerowning and operating costs.

• Power mode is used for normalmachine operation providingpeak performance under anyoperating condition.

• Travel mode automatically engageswhen the travel pedal is depressed.This mode provides maximum speedand drawbar pull when repositioningor moving the machine to a newwork location.

Adjustable Hydraulic Sensitivity.This hydraulic modulation control allowsan operator to adjust the sensitivityof the machine according to the jobrequirements. Four levels of sensitivitycan be selected on the soft touch panelto the right of the operator. Lower settingsprovide finite control, without sacrificingfull hydraulic power. This feature canbe quickly activated/de-activated usinga trigger on the right joystick.

8

Ease of OperationDesigned for simple, easy operation, the M316C allows the operator to focus on production.

New Drive Line Concept. The newtravel motor and transmission controlin the drive line provide comfortabletravel due to increased smoothness,improved hydraulic retarding andimproved gear shifting.

Travel Motor. The advanced travelmotor gives higher hydraulic retardingforces especially in downhill roadingby continuously using the optimaldisplacement of the travel motor forretarding. Braking characteristics canbe adjusted to the operator’s preferredlevel of retarding in three steps.

Transmission Control. Provides moreuseable speed, for faster uphill traveland downhill retarding.

Heavy Duty Axles. The front axle offerswide oscillating and steering angles.The transmission is mounted directlyon the rear axle for protection andoptimum ground clearance.

Advanced Disc Brake System. The newdisc brake system works directly on thehub instead of the drive shaft to avoidplanetary gear backlash. This eliminatesthe rocking effect associated withworking free on wheels. The new axleis designed for low maintenance and theoil change intervals have been increasedfrom 1,000 to 2,000 hours which furtherreduce owning and operating costs.

Undercarriage Design. A rigid, weldedframe provides excellent durability.Efficient hydraulic lines routing,transmission protection and heavy dutyaxles make the undercarriage perfectfor wheel excavator applications.Both outriggers and dozer blade arepin-on for maximum flexibility.An optional work tool restraint baris available.

Outriggers. The pin-on design allowsthe outriggers to be mounted on thefront and/or rear for maximum operatingstability when digging or lifting and areindividually controlled for levelingon slopes.

Dozer Blade. The pin-on designallows the dozer blade to be mountedon the front and/or rear and is usedfor leveling, clean-up work and forstabilizing the machine during diggingapplications. The large dozer bottomand parallel design provide minimizedground pressure.

Tool Box. A large sealed and lockabletool box is mounted on the undercarriagebetween the steps on the machine’s leftside. A second optional tool box isavailable for the right side.

9

UndercarriageUndercarriage and axle design provides maximum strength, flexibility and mobility on wheels.

Design. Booms and sticks are welded,box section structures with thick,multi-plate fabrications in high stressareas and are built for performanceand long service life.

Flexibility. The choice of three boomsand four sticks provide the rightcombination of reach and diggingforces for all applications.

One-Piece Boom. The one-piece boom(5.05 m/16 ft 7 in) fits best for allstandard applications such as truckloading and digging. The straightsection reduces stress flow and helpsincrease the lifetime of the boom.

Variable Adjustable (VA) Boom.The variable adjustable boom(5.2 m/17 ft 1 in) offers improved rightside visibility and machine roadingbalance. When working in tight quartersor lifting heavy loads, the VA boomoffers the best flexibility. Hammer useis permitted.

Offset Boom. The offset boom(5.2 m/17 ft 1 in) adds a major advantageand a high level of versatility to themachine, providing the ability to digparallel to the machine’s undercarriage.The combination with a tiltable ditchcleaning bucket increases machineversatility.

Sticks. Four different stick lengths areoffered to match different applicationrequirements:

• Short stick (2.1 m/6 ft 10 in)for maximum breakout forceand lifting capability.

• Medium stick (2.4 m/7 ft 10 in) forgreater crowd force and lift capacity.

• Long stick (2.6 m/8 ft 6 in) forgreater depth and reach requirements.

• Industrial stick (3.1 m/10 ft 3 in)for use with free swinging grapplesin material handling and industrialapplications.

10

Booms and SticksDesigned for maximum flexibility to keep production high on all jobs.

Buckets. Caterpillar offers eightexcavating buckets and three ditchcleaning buckets.

Tip Selection. The following tips areavailable for the M316C:

• Long tips

• Short tips

• Abrasive tips

• Penetration tips

• Sharp corner tips

• Wide tips

Available Couplers. There areseveral hydraulic couplers availablefor the M316C.

• Quick Couplers enable the operatorto simply release one work tool andpick up another. This makes theexcavator highly versatile to suitthe business and application needs.

• Pin Grabber Plus Quick Couplersmultiply the versatility and utilityby allowing them to pick up and usevirtually any work tool equippedwith standard pins. Both manualand hydraulic actuated versions areavailable. The hydraulic circuit isavailable as a retrofit kit dedicated tothis coupler. Buckets can be reversedfor greater flexibility when workingaround and under obstructions.

• The dedicated Pin-Lock is a hookand pin type interface which featuresa locking mechanism to ensure asecure fit. Buckets and tools with thematching interface can be changedin about one minute and requireone pin (manually inserted into thecoupler) to couple tools into place.The Pin-Lock dedicated couplerpins onto the stick, allowing themachine to pick up new and oldstyle competitive work toolsthat have Pin-Lock style pockets.These tools include buckets,hammers, rippers and augers.

• Tilt-Lock couplers have the samefunctionality as the Pin-Lock coupler,but with the added benefit of thetilting function. This functionalityprecisely positions a work tool basedon the work demands. This is key forbackfilling, ditch cleaning, gradingand sloping operations.

• Dedicated Wedge-Lock couplersare considered the standard whentalking about dedicated couplers onhydraulic excavators. This couplerdesign provides excellent durabilityin the most demanding applications.A range of buckets, hammer/compactor brackets, grapples andother tools are available for thiscoupler style.

Tool Control. The integrated ToolControl system allows for five pre-setcombinations, eliminating the need tore-set the hydraulic parameters eachtime a tool is changed. Individual flowand pressure can be programmed easilyas well as one-way/two-way hydraulicfunctions. Each of the five programmedtools can even be given a specific namevia the monitor.

Work Tools. A variety of work tools areavailable from Caterpillar, includingbuckets, quick couplers, grapples,hammers and many others to meetyour application requirements.

Multi-Processor. The CaterpillarMulti-Processors can be equippedwith different jaw types dependingon your need.

• CC-jaws combi cutter

• CR-jaws concrete cutter

• PP-jaws primary pulverizer

• PS-jaws secondary pulverizer

• S-jaws steel

Multi-Grapple. The Multi-Grapplewith unlimited left and right rotationis the ideal tool for stripping, sorting,handling and loading.

Orange Peel Grapple. Specificallydesigned for handling scrap and rockin recycling and transfer applications.

Clamshell. For applications requiringvertical excavation capability or inmaterial transfer needs, a clamshellprovides an ideal solution. The free-swinging tool increases the workingenvelop of your excavator.

Hammer. With their wide variety oftools, Cat hammers provide the perfectmatch for maximum life, efficiencyand productivity.

11

Buckets and Work ToolsA wide variety of buckets and work tools help optimize machine performance.

Easy Access. Gull-wing doors, withpneumatically-assisted lift cylinders,effortlessly lift up for exceptionalaccess to the engine and all servicepoints. An additional toolbox locatedunder the step leading to the upperplatform offers clean, dry storagefor the operator.

Ground Level Service. The fuel/waterseparator, engine oil filter, battery,radiator fluid level, fuel filter, engineoil gauge, hydraulic oil level andair cleaner are all easily accessibleat ground level allowing criticalmaintenance to be performed quicklyand efficiently.

Easy to Clean Coolers. Flat fins onall coolers reduce clogging and makeit easier to remove debris.

Swing-Up AC Condenser. Without usingtools, the AC condenser swings upvertically to allow cleaning on both sidesas well as clear access to the oil cooler.

Front Compartment. The right frontservice compartment tilts providingground level access to the batteries,ATAAC, AC condenser and the air filter.

Air Filter. Caterpillar Radial Seal airfilters eliminate the use of service tools,reducing maintenance time. The airfilter features a double-elementconstruction and built-in precleaner forsuperior cleaning efficiency. When theair cleaner plugs, a warning is displayedon the monitor screen inside the cab.

Capsule Filter. The hydraulic returnfilter, a capsule filter, is situated insidethe hydraulic tank. This filter preventscontaminants from entering the systemwhen the hydraulic oil is changed.

Engine Inspection. The engine can beaccessed from both ground level and theupper structure. The longitudinal layoutensures that all daily inspection itemscan be accessed from ground level.The engine and pump compartmentare separated by a steel wall.

Remote Greasing Block. A greasingblock located in the engine compartmentwith two grease points for the swingbearing and one for the front endattachment delivers grease to hardto reach locations. For the lowerundercarriage, two remote blocks giveeasy access for greasing to the oscillatingaxle and, as an option, the dozer blade.

Water Separator. The water separatorremoves water from fuel even whenunder pressure. For ease of service,the water separator is in the enginecompartment.

12

Extended service intervals and easy access reduce operating costs.

Serviceability

Fuel Tank Drain. Located at the bottomof the upper frame, the fuel tank drainwith hose connection allows simple,spill free fluid draining.

Hydraulic Tank Drain. Located in theengine compartment, the hydraulic tankdrain with hose connection enablessimple, spill free fluid changes.

Handrails and Steps. Large handrailsand steps assist the operator in climbingon and off the machine.

Anti-Skid “Punched-Star” Plate.Anti-skid punched-star plate covers thetop of the steps and upper structure tohelp prevent slipping during maintenance.

Extended Service Intervals.M316C service and maintenanceintervals have been extended to reducemachine service time, increase machineavailability and reduce operating costs.Using Scheduled Oil Sampling analysis(S•O•SSM), hydraulic oil change intervalscan be extended from 2,000 hours to4,000 hours. Engine coolant changeintervals are 12,000 hours with CatExtended Life Coolant/Anti-freeze.

Scheduled Oil Sampling. Caterpillarhas specially developed (S•O•SSM) OilSampling Analysis to help ensure betterperformance, longer life and increasedcustomer satisfaction. It is a thoroughand reliable early warning system whichdetects traces of metals, dirt and othercontaminants in your engine, axle andhydraulic oil. It can predict potentialtrouble early avoiding costly failures.Your Caterpillar dealer can give youresults and specific recommendationsshortly after receiving your sample.

Electronic Technician. The electronicengine and machine controllers providedetailed diagnostic capability for servicetechnicians. The ability to store activeand intermittent indicators simplifiesproblem diagnosis and reduces totalrepair time, resulting in improvedmachine availability and loweroperating cost.

Caterpillar Product Link System.The Product Link system includes atransceiver module (on-board themachine), office application PC softwareand a satellite communications networkto track machine hours, location andwarnings. Product Link simplifiesmaintenance scheduling, fleetmanagement and product problemevent tracking and diagnosis. (PL-321)

13

More Performance. The M316C isdesigned to provide more performanceyet uses less fuel than ever before.This means more work done in a day,less fuel consumed and minimalimpact on the environment.

Low Exhaust Emissions. The Cat 3056Eused in the M316C is a low emissionengine designed to meet US EPAnon-road Tier 2 emission regulations.

Quiet Operation. The noise level insidethe cab and as well the outside spectatorsound are extremely low.

Automatic Engine Control. AutomaticEngine Control (AEC) reduces enginerpm if no operation is performed,maximizing fuel efficiency and reducingsound levels.

Ozone Protection. To help protect theearth’s ozone layer, the air conditioningunit uses only R-134a refrigerantwhich does not contain harmfulchlorofluorocarbons (CFC’s).

Biodegradable Hydraulic Oil.The biodegradable hydraulic oil(HEES™) is formulated to provideexcellent high-pressure and high-temperature characteristics and isfully compatible with the all hydrauliccomponents. HEES is fully decomposedby soil or water microorganisms,providing a more environmentally-sound alternative to mineral-based oils.This is available as an option.

Fewer Leaks and Spills.Lubricant fillers and drains aredesigned to minimize spills.

Longer Service Intervals.Working close with your CaterpillarDealer can help extend service intervalsfor engine oil, hydraulic oil, axle oil,and coolant meaning less required fluids.This means less disposal, all adding upto lower operating costs.

14

Environmentally Responsible DesignThe M316C helps build a better world and preserve the fragile environment.

Product Support. You will find nearlyall parts at our dealer parts counter.Cat dealers utilize a worldwide computernetwork to find in-stock parts to minimizemachine downtime. You can save moneywith Cat remanufactured components.

Machine Selection. Make detailedcomparisons of the machines you areconsidering before you buy. What arejob requirements, machine attachmentsand operating hours? What productionis needed? Your Cat dealer can providerecommendations.

Purchase. Look past the initial price.Consider the financing options availableas well as day-to-day operating costs.This is also the time to look at dealerservices that can be included in the costof the machine to yield lower equipmentowning and operating costs over thelong run.

Customer Support Agreements.Cat dealers offer a wide variety ofproduct support agreements, and workwith customers to develop a plan thatbest meets specific needs. These planscan cover the entire machine, includingattachments, to help protect thecustomer’s investment.

Operation. Improving operatingtechniques can boost your profits.Your Cat dealer has videotapes, literatureand other ideas to help you increaseproductivity, and Caterpillar offerscertified operator training classes tohelp maximize the return on yourmachine investment.

Maintenance Services. Repair optionprograms guarantee the cost of repairsup front. Diagnostic programs such asS•O•SSM analysis and Coolant Samplingand Technical Analysis help avoidunscheduled repairs.

Replacement. Repair, rebuild or replace?Your Cat dealer can help you evaluatethe cost involved so you can make theright choice.

15

Complete Customer SupportCat dealer services help you operate longer with lower costs.

16 M316C Wheel Excavator specifications

Cab

Cab/FOGS option ISO 10262

Hydraulic System

Tank Capacity 135 L 35.6 galSystem Capacity 230 L 61 galMaximum Pressure

Implements 35 000 kPa 5,076 psiTravel 35 000 kPa 5,076 psi

Maximum Flow 245 L/min 65 gal/minAuxiliary System – 3100 kPa 450 psiMedium Pressure MaxAuxiliary System – 49 L/min 13 gal/minMedium Pressure Max FlowAuxiliary System – 32 998 kPa 4,786 psiHigh Pressure MaxAuxiliary System – 245 L/min 65 gal/minHigh Pressure Max Flow

Transmission

Maximum Travel Speed 34 km/h 21 mph1st Gear, Forward/Reverse 8 km/h 5 mph2nd Gear, Forward/Reverse 34 km/h 21 mphCreeper Speed (1st Gear) 3 km/h 1.9 mphCreeper Speed (2nd Gear) 13 km/h 8.1 mphDrawbar Pull 98 kN 22,031 lbMaximum Gradeability 72 %

Service Refill Capacities

Fuel Tank Capacity 310 L 82 galCooling 39 L 10 galEngine Crankcase 16 L 4.2 galRear Axle Housing (Differential) 14 L 3.7 galFront Steering Axle (Differential) 10.5 L 2.8 galFinal Drive 2.5 L 0.7 galPowershift Transmission 2.5 L 0.7 gal

Tires

Standard 10.00-20 dual pneumaticOptional See Optional Equipment

Engine

Engine Model Cat 3056E ATAACGross Power 108 kW 144 hpNet Power 103 kW 138 hpISO 9249 103 kW 138 hpEEC 80/1269 103 kW 138 hpBore 100 mm 3.94 inStroke 127 mm 5 inDisplacement 6 L 366 in3

Cylinders 6Maximum Torque at 1,400 rpm 625 N•m 461 lb ft

• Ratings at 2,000 rpm.

• The 3056E ATAAC engine meets U.S. EPA non-road Tier 2emission requirements.

• Net power advertised is the power available at the flywheelwhen the engine is equipped with fan, air cleaner, mufflerand alternator.

• No engine derating required below 3000 m (9,840 ft).

Weights

Operating Weight 16 300 kg (35,935 lb)to 18 200 kg (40,120 lb)

VA BoomRear dozer only 16 750 kg 36,927 lbRear dozer, front outriggers 17 850 kg 39,352 lbFront and rear outriggers 18 200 kg 40,124 lb

One-Piece BoomRear dozer only 16 300 kg 35,935 lbRear dozer, front outriggers 17 350 kg 38,250 lbFront and rear outriggers 17 700 kg 39,022 lb

Dozer Blade 760 kg 1,676 lbOutriggers 1020 kg 2,250 lbCounterweight 3700 kg 8,157 lb2.11 m (6’11”) Stick 420 kg 926 lb2.38 m (7’10”) Stick 460 kg 1,014 lb2.59 m (8’6”) Stick 470 kg 1,036 lb3.08 m (10’2”) Industrial Stick 430 kg 948 lb

Swing Mechanism

Swing Speed 10.5 rpmSwing Torque 40.1 kN•m 29,576 lb ftMaximum Flow 80 L/min 21.1 gal/minPressure 37 000 kPa 5,366 psi

17M316C Wheel Excavator specifications

➤

➤

500 mm1'8"

➤➤ 4330 mm 14'2"

➤➤ ➤➤2600 mm

8'6"1100 mm

13'7"

➤

➤

500 mm1'8"

➤➤2600 mm

8'6"

➤➤

➤➤1075 mm

3'6"➤➤ 5060 mm

16'7"

1150 mm3'9" ➤➤

1100 mm3'7"

➤

➤

1

➤➤ 3

➤

➤

6

➤

➤

5

➤➤ 4➤➤ 2

375 mm (15")

➤➤

➤

3676 mm12'1"

120 mm4.7"

➤➤

➤

3070 mm10'1"

➤

3970 mm13'1"

➤

➤

325 mm1'1"

➤➤ 5025 mm16'6"

➤➤ ➤➤ ➤1075 mm

3'6"1150 mm

3'9"800 mm

2'8"

➤➤ 2550 mm8'4"

➤➤ 2540 mm8'4"VA boom One-piece boom

mm ft/in mm ft/in1 Shipping height

2.4 m/7'10" stick cab height cab height

2.6 m/8'6" stick cab height cab height

2 Shipping length

2.4 m/7'10" stick 8550 28'1" 8400 27'7"

2.6 m/8'6" stick 8540 28' 8400 27'7"

3 Support point

2.4 m/7'10" stick 3650 12' 3270 10'9"

2.6 m/8'6" stick 3550 11'8" 3150 10'4"

4 Tail swing radius 2290 7'6" 2290 7'6"

5 Counterweight clearance 1280 4'2" 1280 4'2"

6 Cab height 3170 10'5" 3170 10'5"

DimensionsAll dimensions are approximate.

Undercarriage with dozer only Undercarriage with 2 setsof outriggers

Undercarriage with 1 set of outriggers and dozer

Roading positionwith 2.4 m/7'10" stick


Stick Length 2.1 m (6'10") 2.4 m (7'10") 2.6 m (8'6")1 Maximum 10 060 mm 10 250 mm 10 400 mm

Digging Height (33'0") (33'8") (34'1")2 Maximum 6970 mm 7160 mm 7320 mm

Dump Height (22'10") (23'6") (24'0")3 Maximum 5570 mm 5870 mm 6070 mm

Digging Depth (18'3") (19'3") (19'11")4 Maximum Vertical 3700 mm 3900 mm 4070 mm

Wall Digging Depth (12'2") (12'10") (13'4")5 Maximum Depth

2.5 m (8'2") 5349 mm 5667 mm 5877 mmStraight Clean-up (17'7") (18'7") (19'3")

6 Maximum Reach 9100 mm 9360 mm 9560 mm(29'10") (30'9") (31'4")

7 Maximum Reach 8910 mm 9190 mm 9380 mmat Ground Level (29'3") (30'2") (30'9")

Bucket Forces 93 kN 93 kN 93 kN(ISO 6015) (20,900 lb) (20,900 lb) (20,900 lb)Stick Forces 75 kN 69 kN 66 kN(ISO 6015) (16,860 lb) (15,500 lb) (14,830 lb)

VA Boom Working Ranges5.2 m (17'1") Variable adjustable boom, 1405 mm (55") tip radius bucket

Stick Length 2.1 m (6'10") 2.4 m (7'10") 2.6 m (8'6")1 Maximum 9000 mm 9090 mm 9210 mm

Digging Height (29'6") (29'10") (30'3")2 Maximum 6020 mm 6130 mm 6250 mm

Dump Height (19'9") (20'1") (20'6")3 Maximum 5370 mm 5670 mm 5870 mm

Digging Depth (17'7") (18'7") (19'3")4 Maximum Vertical 3490 mm 3630 mm 3795 mm

Wall Digging Depth (11'5") (11'11") (12'5")5 Maximum Depth

2.5 m (8'2") 5149 mm 5467 mm 6670 mmStraight Clean-up (16'11") (17'11") (21'11")

6 Maximum Reach 8900 mm 9160 mm 9350 mm(29'2") (30'1") (30'8")

7 Maximum Reach 8710 mm 8970 mm 9170 mmat Ground Level (28'7") (29'5") (30'1")

Bucket Forces 93 kN 93 kN 93 kN(ISO 6015) (20,900 lb) (20,900 lb) (20,900 lb)Stick Forces 75 kN 69 kN 66 kN(ISO 6015) (16,860 lb) (15,500 lb) (14,830 lb)

One-piece Boom Working Ranges5.05 m (16'7") One-piece boom, 1405 mm (55") tip radius bucket

10 9 8 7 6 5 4 3 2 1 0 2 31

35 30 25 20 15 10 5 50

Meters

Feet

1

2

3

4

5

6

7

0

1

2

3

4

5

6

7

8

9

4

5

6

7

8

9

10

MetersFeet

0

5

10

15

20

25

5

10

15

20

25

30

35

2.4 m (7'10")

2.6 m (8'6")

2.1 m (6'10")

10 9 8 7 6 5 4 3 2 1 0 2 31 Meters

Feet35 30 25 20 15 10 5 50

1

2

3

4

5

6

7

0

1

2

3

4

5

6

7

8

9

4

5

6

7

8

9

10

MetersFeet

0

5

10

15

20

25

5

10

15

20

25

30

35

2.4 m(7'10")

2.6 m(8'6")

2.1 m(6'10")


• Buckets Specification chart does not list all bucket options, only the buckets available X-factory. For a complete list of buckets and work tools offeredby Caterpillar, please contact your Caterpillar dealer.

• All bucket recommendations are subject to material density.• All excavation buckets have 1405 mm (55") tip radius with long teeth.• Buckets are not drilled for sidecutters.• All excavation buckets include weld-on tooth adapters.• Tilting ditch cleaning bucket weights include tilt mounting device.• All buckets come with adjuster group.• All weights are without tips.• J300 tips required.

Bucket SpecificationsContact your Caterpillar dealer for special bucket requirements.

Bucket type

Excavation

Extreme Excavation

Ditch Cleaning, tiltable

Ditch Cleaning, rigid

mm kg m3in lb yd3

Wid

th

Wei

ght

Capa

city

(SAE

)

No.

of

Teet

h

Buckets without Quick Coupler

600 24 451 995 0.35 0.46 3750 30 445 980 0.48 0.63 4900 36 490 1080 0.61 0.80 41100 43 573 1265 0.82 1.07 51200 47 604 1330 0.91 1.19 51300 51 635 1400 0.99 1.29 51200 47 639 1410 0.91 1.19 51300 51 671 1480 0.99 1.29 51800 71 735 1620 0.47 0.612000 79 770 1700 0.53 0.692000 79 424 935 0.54 0.71

Variable adjustable boom One-piece boom5200 mm (17'1") 5050 mm (16'7")

2 sets Dozer 2 sets DozerDozer of stabilizer and stabilizer Dozer of stabilizer and stabilizerlowered lowered lowered lowered lowered lowered(mm) 2100 2400 2600 2100 2400 2600 2100 2400 2600 2100 2400 2600 2100 2400 2600 2100 2400 2600

Without quick coupler Stick length (ft/in) 6'10" 7'10" 8'6" 6'10" 7'10" 8'6" 6'10" 7'10" 8'6" 6'10" 7'10" 8'6" 6'10" 7'10" 8'6" 6'10" 7'10" 8'6"

Hammers H100, H115 sH120C s × × × × × ×

Multiprocessors MP15 CC, CR, S × × × × × ×PP, PS × × × × × × × × × ×

360° rotatable Shears S320(boom mounted) S325 × × × × × ×Multi-Grapples G310B D, R

G315B D, R × × × × ×Compactors CVP75

400 L (0.5 yd3)Orange Peel Grapples GSH15 500 L (0.67 yd3) × × ×(4 tines) 600 L (0.75 yd3) × × × × × ×

800 L (1.00 yd3) × × × × × ×

360° Working Range Maximum Material density 1800 kg/m3 (3,000 lb/yd3)Maximum Material density 1200 kg/m3 (2,000 lb/yd3)Over the front only

× Not Compatible

Work Tools Matching GuideWhen choosing between various work tool models that can be installed onto the same machine configuration, consider work tool application, productivity requirements, and durability. Refer to work tool specifications for application recommendations and productivity information.

• Not all work tools are available in all areas.


Lift Capacities with VA boom – 5.2 m (17'1")

Metric Units/all weights are in metric tons

Stick2.1 m (6'10")

Grou

nd

3.0 m 4.5 m 6.0 m 7.5 m

6.0 m Rear dozer up t *5.1 5.0 4.5 2.7Rear dozer down t *5.1 5.1 *4.8 3.1Rear stab down t *5.1 *5.1 *4.8 3.82 sets stab down t *5.1 *5.1 *4.8 *4.8Dozer and stab down t *5.1 *5.1 *4.8 4.6

4.5 m Rear dozer up t *6.3 *6.3 *6.1 4.4 4.5 2.8Rear dozer down t *6.3 *6.3 *6.1 5.0 *5.1 3.2Rear stab down t *6.3 *6.3 *6.1 5.9 *5.1 3.92 sets stab down t *6.3 *6.3 *6.1 *6.1 *5.1 *5.1Dozer and stab down t *6.3 *6.3 *6.1 *6.1 *5.1 4.6

3.0 m Rear dozer up t *8.2 7.6 *6.7 4.2 *4.4 2.8 3.0 1.8 *2.4 *1.6 8.11 mRear dozer down t *8.2 *8.2 *7.2 4.8 *5.4 3.2 *4.2 2.1 *2.4 *1.8Rear stab down t *8.2 *8.2 *7.2 *5.8 *5.4 3.9 *4.2 2.5 *2.4 *2.32 sets stab down t *8.2 *8.2 *7.2 *7.2 *5.4 5.4 *4.2 3.8 *2.4 *2.4Dozer and stab down t *8.2 *8.2 *7.2 7.0 *5.4 *4.6 *4.2 3.1 *2.4 *2.4

1.5 m Rear dozer up t *9.6 7.5 6.7 4.2 4.4 2.7 3.0 1.7 *2.5 1.5 8.21 mRear dozer down t *9.6 8.7 *7.9 4.8 *5.7 3.1 *4.5 2.0 *2.5 1.8Rear stab down t *9.6 *9.6 *7.9 5.7 *5.7 3.8 4.2 2.5 *2.5 2.22 sets stab down t *9.6 *9.6 *7.9 *7.9 *5.7 *5.4 *4.5 3.7 *2.5 *2.5Dozer and stab down t *9.6 *9.6 *7.9 6.9 *5.7 4.6 *4.5 3.1 *2.5 *2.5Rear dozer up t *11.8 7.3 6.7 4.0 4.3 2.6 2.9 1.7 *2.6 1.5 7.99 mRear dozer down t *11.8 8.6 *8.0 4.7 *5.8 3.0 *3.9 2.0 *2.6 1.8Rear stab down t *11.8 10.8 *8.0 5.7 *5.8 3.6 *3.9 2.4 *2.6 2.32 sets stab down t *11.8 *11.8 *8.0 *8.0 *5.8 5.4 *3.9 3.7 *2.6 *2.6Dozer and stab down t *11.8 *11.8 *8.0 6.9 *5.8 4.5 *3.9 3.0 *2.6 *2.6

-1.5 m Rear dozer up t 13.1 7.0 6.7 3.9 4.1 2.4 3.0 1.7 7.42 mRear dozer down t *13.1 8.4 *8.2 4.5 *5.7 2.8 *3.0 2.0Rear stab down t *13.1 10.7 *8.2 5.6 *5.7 3.5 *3.0 2.52 sets stab down t *13.1 *13.1 *8.2 *8.2 *5.7 5.2 *3.0 *3.0Dozer and stab down t *13.1 *13.1 *8.2 7.0 *5.7 4.3 *3.0 *3.0

-3.0 m Rear dozer up t 13.3 7.1 6.5 3.7Rear dozer down t *13.3 8.4 *7.5 4.3Rear stab down t *13.3 10.8 *7.5 5.42 sets stab down t *13.3 *13.3 *7.5 *7.5Dozer and stab down t *13.3 *13.3 *7.5 6.7

Undercarriage configuration

* Indicates that the load is limitedby hydraulic capacity rather than tippingcapacity. Lift capacity ratings are basedon SAE standard JISO 10567. Rated loadsdo not exceed 87% of hydraulic liftingcapacity or 75% of tipping capacity.

• Contact your Caterpillar dealerrepresentative, for Heavy CounterWeight lifting capabilities.

• Contact your Caterpillar dealerrepresentative, for Offset Boomlifting capabilities.

• Lifting values are without bucketor coupler installed.

Load Point Height

Load Radius Over Front

Load Radius Over Side

Load at Maximum Reach

Load Radius Over Rear

English Units/all weights are in lbs (multiply by 1,000)

Stick2.1 m (6'10")

Grou

nd

10.0 ft 15.0 ft 20.0 ft 25.0 ft

20.0 ft Rear dozer up lb *11.2 11.0 9.9 5.9Rear dozer down lb *11.2 11.2 *10.5 6.8Rear stab down lb *11.2 *11.2 *10.5 8.32 sets stab down lb *11.2 *11.2 *10.5 *10.5Dozer and stab down lb *11.2 *11.2 *10.5 10.1

15.0 ft Rear dozer up lb *13.8 *13.8 13.4 9.7 9.9 6.1Rear dozer down lb *13.8 *13.8 *13.4 11.0 *11.2 7.0Rear stab down lb *13.8 *13.8 *13.4 13.0 *11.2 8.52 sets stab down lb *13.8 *13.8 *13.4 *13.4 *11.2 *11.2Dozer and stab down lb *13.8 *13.8 *13.4 *13.4 *11.2 10.1

10.0 ft Rear dozer up lb *18.0 16.7 14.7 9.2 *9.7 6.1 6.6 3.9 *5.2 *3.5 26'7"Rear dozer down lb *18.0 *18.0 *15.8 10.5 *11.9 7.0 *9.2 4.6 *5.2 *3.9Rear stab down lb *18.0 *18.0 *15.8 *12.7 *11.9 8.5 *9.2 5.5 *5.2 *5.02 sets stab down lb *18.0 *18.0 *15.8 *15.8 *11.9 11.9 *9.2 8.3 *5.2 *5.2Dozer and stab down lb *18.0 *18.0 *15.8 15.4 *11.9 *10.1 *9.2 6.8 *5.2 *5.2

5.0 ft Rear dozer up lb *21.1 16.5 14.7 9.2 9.7 5.9 6.6 3.7 *5.5 3.3 26'11"Rear dozer down lb *21.1 19.1 *17.4 10.5 *12.5 6.8 *9.9 4.4 *5.5 3.9Rear stab down lb *21.1 *21.1 *17.4 12.5 *12.5 8.3 *9.2 5.5 *5.5 4.82 sets stab down lb *21.1 *21.1 *17.4 *17.4 *12.5 *11.9 *9.9 8.1 *5.5 *5.5Dozer and stab down lb *21.1 *21.1 *17.4 15.2 *12.5 10.1 *9.9 6.8 *5.5 *5.5Rear dozer up lb *26.0 16.1 14.7 8.8 9.4 5.7 6.3 3.7 *5.7 3.3 26'2"Rear dozer down lb *26.0 18.9 *17.6 10.3 *12.7 6.6 *8.5 4.4 *5.7 3.9Rear stab down lb *26.0 23.8 *17.6 12.5 *12.7 7.9 *8.5 5.2 *5.7 5.02 sets stab down lb *26.0 *26.0 *17.6 *17.6 *12.7 11.9 *8.5 8.1 *5.7 *5.7Dozer and stab down lb *26.0 *26.0 *17.6 15.2 *12.7 9.9 *8.5 6.6 *5.7 *5.7

-5.0 ft Rear dozer up lb *28.9 15.4 14.7 8.5 9.0 5.2 6.6 3.7 24'4"Rear dozer down lb *28.8 18.5 *18.0 9.9 *12.5 6.1 *6.6 4.4Rear stab down lb *28.8 23.5 *18.0 12.3 *12.5 7.7 *6.6 5.52 sets stab down lb *28.8 *28.8 *18.0 *18.0 *12.5 11.4 *6.6 *6.6 Dozer and stab down lb *28.8 *28.8 *18.0 15.4 *12.5 9.4 *6.6 *6.6

-10.0 ft Rear dozer up lb *29.3 15.6 14.3 8.1Rear dozer down lb *29.3 18.5 *16.5 9.4Rear stab down lb *29.3 23.8 *16.5 11.92 sets stab down lb *29.3 *29.3 *16.5 *16.5Dozer and stab down lb *29.3 *29.3 *16.5 14.7





Stick2.4 m (7'10")

Grou

nd

3.0 m 4.5 m 6.0 m 7.5 m

6.0 m Rear dozer up t *4.3 *4.3 *4.2 2.7Rear dozer down t *4.3 *4.3 *4.2 3.1Rear stab down t *4.3 *4.3 *4.2 3.72 sets stab down t *4.3 *4.3 *4.2 *4.2Dozer and stab down t *4.3 *4.3 *4.2 *4.2

4.5 m Rear dozer up t *4.7 *4.7 *5.1 4.3 4.4 2.7 *2.6 1.6Rear dozer down t *4.7 *4.7 *5.1 4.9 *4.7 3.1 *2.6 1.9Rear stab down t *4.7 *4.7 *5.1 *5.1 *4.7 3.8 *2.6 2.42 sets stab down t *4.7 *4.7 *5.1 *5.1 *4.7 *4.7 *2.6 *2.6Dozer and stab down t *4.7 *4.7 *5.1 *5.1 *4.7 4.5 *2.6 *2.6

3.0 m Rear dozer up t *8.7 7.6 6.7 4.1 4.3 2.7 2.9 1.7 *1.7 1.3 8.62 mRear dozer down t *8.7 *8.7 *6.8 4.7 *5.1 3.1 *4.2 2.0 *1.7 1.6Rear stab down t *8.7 *8.7 *6.8 5.7 *5.1 3.7 4.1 2.4 *1.7 *1.72 sets stab down t *8.7 *8.7 *6.8 *6.8 *5.1 *5.1 *4.2 3.7 *1.7 *1.7Dozer and stab down t *8.7 *8.7 *6.8 *6.8 *5.1 4.5 *4.2 3.0 *1.7 *1.7

1.5 m Rear dozer up t *9.8 7.4 6.5 4.1 4.3 2.6 2.9 1.6 *1.7 1.2 8.84 mRear dozer down t *9.8 8.5 *7.7 4.7 *5.5 3.0 *4.3 1.9 *1.7 1.4Rear stab down t *9.8 *9.8 *7.7 5.6 *5.5 3.7 4.1 2.4 *1.7 *1.72 sets stab down t *9.8 *9.8 *7.7 *7.7 *5.5 5.2 *4.3 3.6 *1.7 *1.7Dozer and stab down t *9.8 *9.8 *7.7 6.7 *5.5 4.4 *4.3 3.0 *1.7 *1.7Rear dozer up t *11.4 7.2 6.6 3.9 4.2 2.5 2.8 1.6 *1.8 1.2 8.76 mRear dozer down t *11.4 8.5 *7.8 4.6 *5.6 2.9 *4.2 1.8 *1.8 1.4Rear stab down t *11.4 10.6 *7.8 5.7 *5.6 3.6 4.0 2.3 *1.8 1.82 sets stab down t *11.4 *11.4 *7.8 *7.8 *5.6 5.2 *4.2 3.6 *1.8 *1.8Dozer and stab down t *11.4 *11.4 *7.8 6.8 *5.6 4.4 *4.2 2.9 *1.8 *1.8

-1.5 m Rear dozer up t *12.8 6.9 6.6 3.8 4.1 2.3 *2.0 1.3 8.37 mRear dozer down t *12.8 8.2 *7.9 4.4 *5.7 2.7 *2.0 1.5Rear stab down t *12.8 10.6 *7.9 5.5 *5.7 3.4 *2.0 2.02 sets stab down t *12.8 *12.8 *7.9 *7.9 *5.7 5.1 *2.0 *2.0Dozer and stab down t *12.8 *12.8 *7.9 6.9 *5.7 4.2 *2.0 *2.0

-3.0 m Rear dozer up t *13.2 6.9 6.4 3.6 3.9 2.2 *2.4 1.5 7.60 mRear dozer down t *13.2 8.2 *7.9 4.2 *4.1 2.6 *2.4 1.8Rear stab down t *13.2 10.6 *7.9 5.3 *4.1 3.3 *2.4 2.32 sets stab down t *13.2 *13.2 *7.9 *7.9 *4.1 *4.1 *2.4 *2.4Dozer and stab down t *13.2 *13.2 *7.9 6.7 *4.1 *4.1 *2.4 *2.4


Stick2.6 m (8'6")

Grou

nd

3.0 m 4.5 m 6.0 m 7.5 m

6.0 m Rear dozer up t *3.9 *3.9 *4.0 2.7Rear dozer down t *3.9 *3.9 *4.0 3.1Rear stab down t *3.9 *3.9 *4.0 3.82 sets stab down t *3.9 *3.9 *4.0 *4.0Dozer and stab down t *3.9 *3.9 *4.0 *4.0

4.5 m Rear dozer up t *4.5 4.3 4.4 2.8 2.9 1.7Rear dozer down t *4.5 *4.5 *4.6 3.2 *3.2 2.0Rear stab down t *4.5 *4.5 *4.6 3.8 *3.2 2.52 sets stab down t *4.5 *4.5 *4.6 *4.6 *3.2 *3.2Dozer and stab down t *4.5 *4.5 *4.6 4.5 *3.2 3.1

3.0 m Rear dozer up t *8.5 7.6 *6.7 4.2 4.3 2.7 3.0 1.7 *1.6 1.3 8.82 mRear dozer down t *8.5 *8.5 *6.7 4.8 *5.1 3.1 *4.2 2.0 *1.6 1.5Rear stab down t *8.5 *8.5 *6.7 5.7 *5.1 3.7 4.1 2.5 *1.6 *1.62 sets stab down t *8.5 *8.5 *6.7 *6.7 *5.1 *5.1 *4.2 3.7 *1.6 *1.6Dozer and stab down t *8.5 *8.5 *6.7 *6.7 *5.1 4.5 *4.2 3.1 *1.6 *1.6

1.5 m Rear dozer up t *9.8 7.4 6.5 4.1 4.3 2.7 2.9 1.7 *1.6 1.2 9.04 mRear dozer down t *9.8 8.6 *7.6 4.7 *5.5 3.1 *4.3 2.0 *1.6 1.4Rear stab down t *9.8 *9.8 *7.6 5.6 *5.5 3.7 4.1 2.4 *1.6 *1.62 sets stab down t *9.8 *9.8 *7.6 *7.6 *5.5 5.2 *4.3 3.7 *1.6 *1.6Dozer and stab down t *9.8 *9.8 *7.6 6.8 *5.5 4.4 *4.3 3.0 *1.6 *1.6Rear dozer up t *11.2 7.3 6.6 4.0 4.3 2.6 2.8 1.6 *1.7 1.2 8.96 mRear dozer down t *11.2 8.6 *7.8 4.6 *5.6 3.0 *4.3 1.9 *1.7 1.4Rear stab down t *11.2 10.6 *7.8 5.6 *5.6 3.6 4.0 2.4 *1.7 *1.72 sets stab down t *11.2 *11.2 *7.8 *7.8 *5.6 5.2 *4.3 3.6 *1.7 *1.7Dozer and stab down t *11.2 *11.2 *7.8 6.8 *5.6 4.4 *4.3 3.0 *1.7 *1.7

-1.5 m Rear dozer up t *12.8 6.9 6.6 3.8 4.1 2.4 2.8 1.5 *1.9 1.2 8.58 mRear dozer down t *12.8 8.3 *7.9 4.4 *5.7 2.8 *3.0 1.8 *1.9 1.5Rear stab down t *12.8 10.6 *7.9 5.5 *5.7 3.4 *3.0 2.3 *1.9 *1.92 sets stab down t *12.8 *12.8 *7.9 *7.9 *5.7 5.2 *3.0 *3.0 *1.9 *1.9Dozer and stab down t *12.8 *12.8 *7.9 6.9 *5.7 4.3 *3.0 2.9 *1.9 *1.9

-3.0 m Rear dozer up t *13.2 6.9 6.5 3.7 4.0 2.2 *2.2 1.5 7.83 mRear dozer down t *13.2 8.2 *8.1 4.3 *4.7 2.6 *2.2 1.7Rear stab down t *13.2 10.6 *8.1 5.3 *4.7 3.3 *2.2 2.22 sets stab down t *13.2 *13.2 *8.1 *8.1 *4.7 *4.7 *2.2 *2.2Dozer and stab down t *13.2 *13.2 *8.1 6.7 *4.7 4.1 *2.2 *2.2

-4.5 m Rear dozer up t *9.3 6.8Rear dozer down t *9.3 8.2Rear stab down t *9.3 *9.32 sets stab down t *9.3 *9.3Dozer and stab down t *9.3 *9.3






Load Point Height





Lift Capacities with one-piece boom – 5.05 m (16'7")


Stick2.4 m (7'10")

Grou

nd

10.0 ft 15.0 ft 20.0 ft 25.0 ft

20.0 ft Rear dozer up lb *8.5 5.7Rear dozer down lb *8.5 6.6Rear stab down lb *8.5 8.12 sets stab down lb *8.5 *8.5Dozer and stab down lb *8.5 *8.5

15.0 ft Rear dozer up lb 9.4 5.7Rear dozer down lb *10.1 6.6Rear stab down lb *10.1 7.92 sets stab down lb *10.1 *10.1Dozer and stab down lb *10.1 9.9

10.0 ft Rear dozer up lb *14.3 8.5 9.2 5.5 6.3 3.5 *3.7 3.0 27'4"Rear dozer down lb *14.3 9.9 *11.0 6.1 *7.9 4.1 *3.7 3.7Rear stab down lb *14.3 12.1 *11.0 7.7 *7.9 5.2 *3.7 *3.72 sets stab down lb *14.3 *14.3 *11.0 *11.0 *7.9 *7.9 *3.7 *3.7Dozer and stab down lb *14.3 *14.3 *11.0 9.4 *7.9 6.6 *3.7 *3.7

5.0 ft Rear dozer up lb 13.8 7.7 8.8 5.0 6.1 3.5 *3.7 2.8 28'3"Rear dozer down lb *16.7 9.0 *12.1 5.9 *9.7 4.1 *3.7 3.3Rear stab down lb *16.7 11.4 *12.1 7.4 8.8 5.2 *3.7 *3.72 sets stab down lb *16.7 *16.7 *12.1 11.2 *9.7 7.9 *3.7 *3.7Dozer and stab down lb *16.7 14.3 *12.1 9.2 *9.7 6.3 *3.7 *3.7Rear dozer up lb *7.9 *7.9 13.2 7.2 8.5 4.8 6.1 3.5 *4.1 2.8 28'Rear dozer down lb *7.9 *7.9 *17.4 8.5 *12.5 5.7 *8.3 3.9 *4.1 3.3Rear stab down lb *7.9 *7.9 *17.4 11.0 *12.5 7.0 *8.3 5.0 *4.1 *4.12 sets stab down lb *7.9 *7.9 *17.4 17.4 *12.5 11.0 *8.3 7.7 *4.1 *4.1Dozer and stab down lb *7.9 *7.9 *17.4 13.8 *12.5 9.0 *8.3 6.3 *4.1 *4.1

-5.0 ft Rear dozer up lb *15.6 13.4 13.2 7.2 8.5 4.8 *4.6 3.0 26'8"Rear dozer down lb *15.6 *15.6 *16.3 8.5 *11.6 5.7 *4.6 3.5Rear stab down lb *15.6 *15.6 *16.3 10.8 *11.6 7.0 *4.6 4.62 sets stab down lb *15.6 *15.6 *16.3 *16.3 *11.6 10.8 *4.6 *4.6Dozer and stab down lb *15.6 *15.6 *16.3 13.6 *11.6 8.8 *4.6 *4.6

-10.0 ft Rear dozer up lb *18.0 13.8 *13.0 7.4 *8.3 4.8 *5.5 3.5 24'1"Rear dozer down lb *18.0 16.5 *13.0 8.8 *8.3 5.7 *5.5 4.1Rear stab down lb *18.0 *18.0 *13.0 11.0 *8.3 7.2 *5.5 5.22 sets stab down lb *18.0 *18.0 *13.0 *13.0 *8.3 *8.3 *5.5 *5.5Dozer and stab down lb *18.0 *180. *13.0 *13.0 *8.3 *8.3 *5.5 *5.5


Stick2.6 m (8'6")

Grou

nd

10.0 ft 15.0 ft 20.0 ft 25.0 ftUndercarriage configuration


15.0 ft Rear dozer up lb 9.4 5.7 *4.8 3.7Rear dozer down lb *9.7 6.6 *4.8 4.4Rear stab down lb *9.7 8.1 *4.8 *4.82 sets stab down lb *9.7 *9.7 *4.8 *4.8Dozer and stab down lb *9.7 *9.7 *4.8 *4.8

10.0 ft Rear dozer up lb *14.1 8.5 9.2 5.5 6.3 3.7 *3.5 3.0 28'2"Rear dozer down lb *14.1 9.9 *11.0 6.3 *8.3 4.4 *3.5 *3.5Rear stab down lb *14.1 12.3 *11.0 7.7 *8.3 5.2 *3.5 *3.52 sets stab down lb *14.1 *14.1 *11.0 *11.0 *8.3 8.1 *3.5 *3.5Dozer and stab down lb *14.1 *14.1 *11.0 9.7 *8.3 6.6 *3.5 *3.5

5.0 ft Rear dozer up lb 13.8 7.9 8.8 5.0 6.1 3.5 *3.5 2.8 28'11"Rear dozer down lb *16.5 9.2 *12.1 5.9 *9.4 4.1 *3.5 3.3Rear stab down lb *16.5 11.4 *12.1 7.4 8.8 5.2 *3.5 *3.52 sets stab down lb *16.5 *16.5 *12.1 11.2 *9.4 7.9 *3.5 *3.5Dozer and stab down lb *16.5 14.5 *12.1 9.2 *9.4 6.6 *3.5 *3.5Rear dozer up lb *8.3 *8.3 13.4 7.4 8.5 4.8 6.1 3.5 *3.7 2.6 28'8"Rear dozer down lb *8.3 *8.3 *17.4 8.8 *12.5 5.7 *9.4 4.1 *3.7 3.3Rear stab down lb *8.3 *8.3 *17.4 11.0 *12.5 7.2 8.8 5.0 *3.7 *3.72 sets stab down lb *8.3 *8.3 *17.4 17.4 *12.5 11.0 *9.4 7.7 *3.7 *3.7Dozer and stab down lb *8.3 *8.3 *17.4 13.8 *12.5 9.0 *9.4 6.3 *3.7 *3.7

-5.0 ft Rear dozer up lb *14.9 13.4 13.2 7.4 8.5 4.8 *4.1 2.8 27'4"Rear dozer down lb *14.9 *14.9 *16.5 8.5 *11.9 5.7 *4.1 3.5Rear stab down lb *14.9 *14.9 *16.5 10.8 *11.9 7.0 *4.1 *4.12 sets stab down lb *14.9 *14.9 *16.5 *16.5 *11.9 10.8 *4.1 *4.1Dozer and stab down lb *14.9 *14.9 *16.5 13.2 *11.9 8.8 *4.1 *4.1

-10.0 ft Rear dozer up lb *19.1 13.8 13.2 7.4 8.5 4.8 *5.0 3.5 24'9"Rear dozer down lb *19.1 16.5 *13.6 8.8 *9.2 5.7 *5.0 4.1Rear stab down lb *19.1 *19.1 *13.6 11.0 *9.2 7.2 *5.0 5.02 sets stab down lb *19.1 *19.1 *13.6 *13.6 *9.2 *9.2 *5.0 *5.0Dozer and stab down lb *19.1 *19.1 *13.6 *13.6 *9.2 9.0 *5.0 *5.0





Load Point Height









Stick2.1 m (6'10")

Grou

nd

3.0 m 4.5 m 6.0 m 7.5 m

6.0 m Rear dozer up t *4.1 2.7Rear dozer down t *4.1 3.1Rear stab down t *4.1 3.82 sets stab down t *4.1 *4.1Dozer and stab down t *4.1 *4.1

4.5 m Rear dozer up t *5.8 4.2 4.4 2.7Rear dozer down t *5.8 4.9 *4.9 3.1Rear stab down t *5.8 *5.8 *4.9 3.82 sets stab down t *5.8 *5.8 *4.9 *4.9Dozer and stab down t *5.8 *5.8 *4.9 4.6

3.0 m Rear dozer up t 6.7 3.9 4.3 2.6 *2.4 1.7 7.91 mRear dozer down t *7.0 4.6 *5.4 3.0 *2.4 2.0Rear stab down t *7.0 5.6 *5.4 3.6 *2.4 *2.42 sets stab down t *7.0 *7.0 *5.4 *5.4 *2.4 *2.4Dozer and stab down t *7.0 7.0 *5.4 4.5 *2.4 *2.4

1.5 m Rear dozer up t 6.4 3.7 4.1 2.5 3.0 1.8 *2.5 1.6 8.01 mRear dozer down t *7.9 4.3 *5.8 2.8 *3.7 2.0 *2.5 1.9Rear stab down t *7.9 5.3 *5.8 3.5 *3.7 2.5 *2.5 2.32 sets stab down t *7.9 *7.9 *5.8 5.2 *3.7 *3.7 *2.5 *2.5Dozer and stab down t *7.9 6.6 *5.8 4.3 *3.7 3.1 *2.5 *2.5Rear dozer up t 6.2 3.5 4.0 2.4 *2.7 1.7 7.78 mRear dozer down t *8.1 4.1 *5.9 2.8 *2.7 1.9Rear stab down t *8.1 5.1 *5.8 3.4 *2.7 2.42 sets stab down t *8.1 8.0 *5.9 5.1 *2.7 *2.7Dozer and stab down t *8.1 6.5 *5.9 4.2 *2.7 *2.7

-1.5 m Rear dozer up t *7.4 6.4 6.2 3.5 4.0 2.3 3.1 1.9 7.20 mRear dozer down t *7.4 *7.4 *7.4 4.1 *5.3 2.7 *3.1 2.2Rear stab down t *7.4 *7.4 *7.4 5.1 *5.3 3.4 *3.1 2.72 sets stab down t *7.4 *7.4 *7.4 *7.4 *5.3 5.1 *3.1 *3.1Dozer and stab down t *7.4 *7.4 *7.4 6.4 *5.3 4.2 *3.1 *3.1

-3.0 m Rear dozer up t *7.7 6.5 *5.7 3.6 *3.3 2.4 6.13 mRear dozer down t *7.7 *7.7 *5.7 4.2 *3.3 2.8Rear stab down t *7.7 *7.7 *5.7 5.2 *3.3 *3.32 sets stab down t *7.7 *7.7 *5.7 *5.7 *3.3 *3.3Dozer and stab down t *7.7 *7.7 *5.7 *5.7 *3.3 *3.3






Load Point Height






Stick2.1 m (6'10")

Grou

nd

10.0 ft 15.0 ft 20.0 ft 25.0 ft


15.0 ft Rear dozer up lb *12.7 9.2 9.7 5.9Rear dozer down lb *12.7 10.8 *10.8 6.8Rear stab down lb *12.7 *12.7 *10.8 8.32 sets stab down lb *12.7 *12.7 *10.8 *10.8Dozer and stab down lb *12.7 *12.7 *10.8 10.1

10.0 ft Rear dozer up lb 14.7 8.5 9.4 5.7 *5.2 3.7 25'11"Rear dozer down lb *15.4 10.1 *11.9 6.6 *5.2 4.4Rear stab down lb *15.4 12.3 *11.9 7.9 *5.2 *5.22 sets stab down lb *15.4 *15.4 *11.9 *11.9 *5.2 *5.2Dozer and stab down lb *15.4 15.4 *11.9 9.9 *5.2 *5.2

5.0 ft Rear dozer up lb 14.1 8.1 9.0 5.5 6.6 3.9 *5.5 3.5 26'2"Rear dozer down lb *17.4 9.4 *12.7 6.1 *8.1 4.4 *5.5 4.1Rear stab down lb *17.4 11.6 *12.7 7.7 *8.1 5.5 *5.5 5.02 sets stab down lb *17.4 *17.4 *12.7 11.4 *8.1 *8.1 *5.5 *5.5Dozer and stab down lb *17.4 14.5 *12.7 9.4 *8.1 6.8 *5.5 *5.5Rear dozer up lb 13.6 7.7 8.8 5.2 *5.9 3.7 25'6"Rear dozer down lb *17.8 9.0 *13.0 6.1 *5.9 4.1Rear stab down lb *17.8 11.2 12.7 7.4 *5.9 5.22 sets stab down lb *17.8 17.6 *13.0 11.2 *5.9 *5.9Dozer and stab down lb *17.8 14.3 *13.0 9.2 *5.9 *5.9

-5.0 ft Rear dozer up lb *16.3 14.1 13.6 7.7 8.8 5.0 6.8 4.1 23'7"Rear dozer down lb *16.3 *16.3 *16.3 9.0 *11.6 5.9 *6.8 4.8Rear stab down lb *16.3 *16.3 *16.3 11.2 *11.6 7.4 *6.8 5.92 sets stab down lb *16.3 *16.3 *16.3 *16.3 *11.6 11.2 *6.8 *6.8Dozer and stab down lb *16.3 *16.3 *16.3 14.1 *11.6 9.2 *6.8 *6.8

-10.0 ft Rear dozer up lb *16.9 14.3 *12.5 7.9 *7.2 5.2 20'1"Rear dozer down lb *16.9 *16.9 *12.5 9.2 *7.2 6.1Rear stab down lb *16.9 *16.9 *12.5 11.4 *7.2 *7.22 sets stab down lb *16.9 *16.9 *12.5 *12.5 *7.2 *7.2Dozer and stab down lb *16.9 *16.9 *12.5 *12.5 *7.2 *7.2





Stick2.4 m (7'10")

Grou

nd

3.0 m 4.5 m 6.0 m 7.5 m


4.5 m Rear dozer up t 4.3 2.6Rear dozer down t *4.6 3.0Rear stab down t *4.6 3.62 sets stab down t *4.6 *4.6Dozer and stab down t *4.6 4.5

3.0 m Rear dozer up t *6.5 3.9 4.2 2.5 2.9 1.6 *1.7 1.4 8.4 mRear dozer down t *6.5 4.5 *5.0 2.8 *3.6 1.9 *1.7 1.7Rear stab down t *6.5 5.5 *5.0 3.5 *3.6 2.4 *1.7 *1.72 sets stab down t *6.5 *6.5 *5.0 *5.0 *3.6 *3.6 *1.7 *1.7Dozer and stab down t *6.5 *6.5 *5.0 4.3 *3.6 3.0 *1.7 *1.7

1.5 m Rear dozer up t 6.3 3.5 4.0 2.3 2.8 1.6 *1.7 1.3 8.63 mRear dozer down t *7.6 4.1 *5.5 2.7 *4.4 1.9 *1.7 1.5Rear stab down t *7.6 5.2 *5.5 3.4 4.0 2.4 *1.7 *1.72 sets stab down t *7.6 *7.6 *5.5 5.1 *4.4 3.6 *1.7 *1.7Dozer and stab down t *7.6 6.5 *5.5 4.2 *4.4 2.9 *1.7 *1.7Rear dozer up t *3.6 *3.6 6.0 3.3 3.9 2.2 2.8 1.6 *1.9 1.3 8.55 mRear dozer down t *3.6 *3.6 *7.9 3.9 *5.7 2.6 *3.8 1.8 *1.9 1.5Rear stab down t *3.6 *3.6 *7.9 5.0 *5.7 3.2 *3.8 2.3 *1.9 *1.92 sets stab down t *3.6 *3.6 *7.9 7.9 *5.7 5.0 *3.8 3.5 *1.9 *1.9Dozer and stab down t *3.6 *3.6 *7.9 6.3 *5.7 4.1 *3.8 2.9 *1.9 *1.9

-1.5 m Rear dozer up t *7.1 6.1 6.0 3.3 3.9 2.2 *2.1 1.4 8.14 mRear dozer down t *7.1 *7.1 *7.4 3.9 *5.3 2.6 *2.1 1.6Rear stab down t *7.1 *7.1 *7.4 4.9 *5.3 3.2 *2.1 2.12 sets stab down t *7.1 *7.1 *7.4 *7.4 *5.3 4.9 *2.1 *2.1Dozer and stab down t *7.1 *7.1 *7.4 6.2 *5.3 4.0 *2.1 *2.1

-3.0 m Rear dozer up t *8.2 6.3 *5.9 3.4 *3.8 2.2 *2.5 1.6 7.35 mRear dozer down t *8.2 7.5 *5.9 4.0 *3.8 2.6 *2.5 1.9Rear stab down t *8.2 *8.2 *5.9 5.0 *3.8 3.3 *2.5 2.42 sets stab down t *8.2 *8.2 *5.9 *5.9 *3.8 *3.8 *2.5 *2.5Dozer and stab down t *8.2 *8.2 *5.9 *5.9 *3.8 *3.8 *2.5 *2.5


Stick2.6 m (8'6")

Grou

nd

3.0 m 4.5 m 6.0 m 7.5 m


4.5 m Rear dozer up t 4.3 2.6 *2.2 1.7Rear dozer down t *4.4 3.0 *2.2 2.0Rear stab down t *4.4 3.7 *2.2 *2.22 sets stab down t *4.4 *4.4 *2.2 *2.2Dozer and stab down t *4.4 *4.4 *2.2 *2.2

3.0 m Rear dozer up t *6.4 3.9 4.2 2.5 2.9 1.7 *1.6 1.4 8.60 mRear dozer down t *6.4 4.5 *5.0 2.9 *3.8 2.0 *1.6 *1.6Rear stab down t *6.4 5.6 *5.0 3.5 *3.8 2.4 *1.6 *1.62 sets stab down t *6.4 *6.4 *5.0 *5.0 *3.8 3.7 *1.6 *1.6Dozer and stab down t *6.4 *6.4 *5.0 4.4 *3.8 3.0 *1.6 *1.6

1.5 m Rear dozer up t 6.3 3.6 4.0 2.3 2.8 1.6 *1.6 1.3 8.82 mRear dozer down t *7.5 4.2 *5.5 2.7 *4.3 1.9 *1.6 1.5Rear stab down t *7.5 5.2 *5.5 3.4 4.0 2.4 *1.6 *1.62 sets stab down t *7.5 *7.5 *5.5 5.1 *4.3 3.6 *1.6 *1.6Dozer and stab down t *7.5 6.6 *5.5 4.2 *4.3 3.0 *1.6 *1.6Rear dozer up t *3.8 *3.8 6.1 3.4 3.9 2.2 2.8 1.6 *1.7 1.2 8.74 mRear dozer down t *3.8 *3.8 *7.9 4.0 *5.7 2.6 *4.3 1.9 *1.7 1.5Rear stab down t *3.8 *3.8 *7.9 5.0 *5.7 3.3 4.0 2.3 *1.7 *1.72 sets stab down t *3.8 *3.8 *7.9 7.9 *5.7 5.0 *4.3 3.5 *1.7 *1.7Dozer and stab down t *3.8 *3.8 *7.9 6.3 *5.7 4.1 *4.3 2.9 *1.7 *1.7

-1.5 m Rear dozer up t *6.8 6.1 6.0 3.3 3.9 2.2 *1.9 1.3 8.35 mRear dozer down t *6.8 *6.8 *7.5 3.9 *5.4 2.6 *1.9 1.6Rear stab down t *6.8 *6.8 *7.5 4.9 *5.4 3.2 *1.9 *1.92 sets stab down t *6.8 *6.8 *7.5 *7.5 *5.4 4.9 *1.9 *1.9Dozer and stab down t *6.8 *6.8 *7.5 6.2 *5.4 4.0 *1.9 *1.9

-3.0 m Rear dozer up t *8.7 6.3 6.0 3.4 3.9 2.2 *2.3 1.6 7.58 mRear dozer down t *8.7 7.5 *6.2 4.0 *4.2 2.6 *2.3 1.9Rear stab down t *8.7 *8.7 *6.2 5.0 *4.2 3.3 *2.3 2.32 sets stab down t *8.7 *8.7 *6.2 *6.2 *4.2 *4.2 *2.3 *2.3Dozer and stab down t *8.7 *8.7 *6.2 *6.2 *4.2 4.1 *2.3 *2.3






Load Point Height








Stick2.4 m (7'10")

Grou

nd

10.0 ft 15.0 ft 20.0 ft 25.0 ft

20.0 ft Rear dozer up lb *9.4 *9.4 *9.2 5.9Rear dozer down lb *9.4 *9.4 *9.2 6.8Rear stab down lb *9.4 *9.4 *9.2 8.12 sets stab down lb *9.4 *9.4 *9.2 *9.2Dozer and stab down lb *9.4 *9.4 *9.2 *9.2

15.0 ft Rear dozer up lb *10.3 *10.3 *11.2 9.4 9.7 5.9 *5.7 3.5Rear dozer down lb *10.3 *10.3 *11.2 10.8 *10.3 6.8 *5.7 4.1Rear stab down lb *10.3 *10.3 *11.2 *11.2 *10.3 8.3 *5.7 5.22 sets stab down lb *10.3 *10.3 *11.2 *11.2 *10.3 *10.3 *5.7 *5.7Dozer and stab down lb *10.3 *10.3 *11.2 *11.2 *10.3 9.9 *5.7 *5.7

10.0 ft Rear dozer up lb *19.1 16.7 14.7 9.0 9.4 5.9 6.3 3.7 *3.7 2.8 28'3"Rear dozer down lb *19.1 *19.1 *14.9 10.3 *11.2 6.8 *9.2 4.4 *3.7 3.5Rear stab down lb *19.1 *19.1 *14.9 12.5 *11.2 8.1 9.0 5.2 *3.7 *3.72 sets stab down lb *19.1 *19.1 *14.9 *14.9 *11.2 *11.2 *9.2 8.1 *3.7 *3.7Dozer and stab down lb *19.1 *19.1 *14.9 *14.9 *11.2 9.9 *9.2 6.6 *3.7 *3.7

5.0 ft Rear dozer up lb *21.6 16.3 14.3 9.0 9.4 5.7 6.3 3.5 *3.7 2.6 29'Rear dozer down lb *21.6 18.7 *16.9 10.3 *12.1 6.1 *9.4 4.1 *3.7 3.0Rear stab down lb *21.6 *21.6 *16.9 12.3 *12.1 8.1 9.0 5.2 *3.7 *3.72 sets stab down lb *21.6 *21.6 *16.9 *16.9 *12.1 11.4 *9.4 5.7 *3.7 *3.7Dozer and stab down lb *21.6 *21.6 *16.9 14.7 *12.1 9.7 *9.4 6.6 *3.7 *3.7Rear dozer up lb *25.1 15.8 14.5 8.5 9.2 5.5 6.1 3.5 *3.9 2.6 28'9"Rear dozer down lb *25.1 18.7 *17.1 10.1 *12.3 6.3 *9.2 3.9 *3.9 3.0Rear stab down lb *25.1 23.3 *17.1 12.5 *12.3 7.9 8.8 5.0 *3.9 3.92 sets stab down lb *25.1 *25.1 *17.1 *17.1 *12.3 11.4 *9.2 7.9 *3.9 *3.9Dozer and stab down lb *25.1 *25.1 *17.1 14.9 *12.3 9.7 *9.2 6.3 *3.9 *3.9

-5.0 ft Rear dozer up lb *28.2 15.2 14.5 8.3 9.0 5.0 *4.4 2.8 27'5"Rear dozer down lb *28.2 18.0 *17.4 9.7 *12.5 5.9 *4.4 3.3Rear stab down lb *28.2 23.3 *17.4 12.1 *12.5 7.4 *4.4 4.42 sets stab down lb *28.2 *28.2 *17.4 *17.4 *12.5 11.2 *4.4 *4.4Dozer and stab down lb *28.2 *28.2 *17.4 15.2 *12.5 9.2 *4.4 *4.4

-10.0 ft Rear dozer up lb *29.1 15.2 14.1 7.9 8.5 4.8 *5.2 3.3 24'11"Rear dozer down lb *29.1 18.0 *17.4 9.3 *9.0 5.7 *5.2 3.9Rear stab down lb *29.1 23.3 *17.4 11.6 *9.0 7.2 *5.2 5.02 sets stab down lb *29.1 *29.1 *17.4 *17.4 *9.0 *9.0 *5.2 *5.2Dozer and stab down lb *29.1 *29.1 *17.4 14.7 *9.0 *9.0 *5.2 *5.2


Stick2.6 m (8'6")

Grou

nd

10.0 ft 15.0 ft 20.0 ft 25.0 ft

20.0 ft Rear dozer up lb *8.5 *8.5 *8.8 5.9Rear dozer down lb *8.5 *8.5 *8.8 6.8Rear stab down lb *8.5 *8.5 *8.8 8.32 sets stab down lb *8.5 *8.5 *8.8 *8.8Dozer and stab down lb *8.5 *8.5 *8.8 *8.8

15.0 ft Rear dozer up lb *9.9 9.4 9.7 6.1 6.3 3.7Rear dozer down lb *9.9 *9.9 *10.1 7.0 *7.0 4.4Rear stab down lb *9.9 *9.9 *10.1 8.3 *7.0 5.52 sets stab down lb *9.9 *9.9 *10.1 *10.1 *7.0 7.0Dozer and stab down lb *9.9 *9.9 *10.1 9.9 *7.0 6.8

10.0 ft Rear dozer up lb *18.7 16.7 *14.7 9.2 9.4 5.9 6.6 3.7 *3.5 2.8 28'11"Rear dozer down lb *18.7 *18.7 *14.7 10.5 *11.2 6.8 *9.2 4.4 *3.5 3.3Rear stab down lb *18.7 *18.7 *14.7 12.5 *11.2 8.1 9.0 5.5 *3.5 *3.52 sets stab down lb *18.7 *18.7 *14.7 *14.7 *11.2 *11.2 *9.2 7.0 *3.5 *3.5Dozer and stab down lb *18.7 *18.7 *14.7 *14.7 *11.2 9.9 *9.2 6.8 *3.5 *3.5

5.0 ft Rear dozer up lb *21.6 *16.3 14.3 9.0 9.4 5.9 6.3 3.7 *3.5 2.6 29'8"Rear dozer down lb *21.6 18.9 *16.7 10.3 *12.1 6.8 *9.4 4.4 *3.5 3.0Rear stab down lb *21.6 *21.6 *16.7 12.3 *12.1 8.1 9.0 5.2 *3.5 *3.52 sets stab down lb *21.6 *21.6 *16.7 *16.7 *12.1 11.4 *9.4 8.1 *3.5 *3.5Dozer and stab down lb *21.6 *21.6 *16.7 14.9 *12.1 9.7 *9.4 6.6 *3.5 *3.5Rear dozer up lb *24.6 16.0 14.5 8.8 9.4 5.7 6.1 3.5 *3.7 2.6 29'4"Rear dozer down lb *24.6 18.9 *17.1 10.1 *12.3 6.6 *9.4 4.1 *3.7 3.0Rear stab down lb *24.6 23.3 *17.1 12.3 *12.3 7.9 8.8 5.2 *3.7 *3.72 sets stab down lb *24.6 *24.6 *17.1 *17.1 *12.3 11.4 *9.4 7.9 *3.7 *3.7Dozer and stab down lb *24.6 *24.6 *17.1 14.9 *12.3 9.7 *9.4 6.6 *3.7 *3.7

-5.0 ft Rear dozer up lb *28.2 15.2 14.5 8.3 9.0 5.2 6.1 3.3 *4.1 2.6 28'1"Rear dozer down lb *28.2 18.2 *17.4 9.7 *12.5 6.1 *6.6 3.9 *4.1 3.3Rear stab down lb *28.2 23.3 *17.4 12.1 *12.5 7.4 *6.6 5.0 *4.1 *4.12 sets stab down lb *28.2 *28.2 *17.4 *17.4 *12.5 11.4 *6.6 *6.6 *4.1 *4.1Dozer and stab down lb *28.2 *28.2 *17.4 15.2 *12.5 9.4 *6.6 6.3 *4.1 *4.1

-10.0 ft Rear dozer up lb *29.1 15.2 14.3 8.1 8.8 4.8 *4.8 3.3 25'8"Rear dozer down lb *29.1 18.0 *17.8 9.4 *10.3 5.7 *4.8 3.7Rear stab down lb *29.1 23.3 *17.8 11.6 *10.3 7.2 *4.8 4.82 sets stab down lb *29.1 *29.1 *17.8 *17.8 *10.3 *10.3 *4.8 *4.8Dozer and stab down lb *29.1 *29.1 *17.8 14.7 *10.3 9.0 *4.8 *4.8

-15.0 ft Rear dozer up lb *20.5 14.9Rear dozer down lb *20.5 18.0Rear stab down lb *20.5 *20.52 sets stab down lb *20.5 *20.5Dozer and stab down lb *20.5 *20.5






Load Point Height






Standard EquipmentStandard equipment may vary. Consult your Caterpillar dealer for details.

OPERATOR STATIONAir conditioner with automatic climate controlAsh tray with cigarette lighterBolt-on FOGS capabilityBottom mounted parallel wiper and washerCoat hookDrink holderFloor mat, washableFully adjustable suspensionHeater and defrosterJoysticks, adjustableLeft side console, tiltableLight, interiorLiterature holderLow fuel indicator lightOpenable two-piece front windshieldParallel mounted top and bottom wiper and washerParking brakePolycarbonate skylightPositive filtered ventilationPower supply, 12V-7ARadio, AM/FM stereo (24V)Retractable seat beltSteering column, tiltableStorage area suitable for a lunch boxSunscreen

UNDERCARRIAGEHeavy-duty axles with advanced travel motor

with adjustable braking forceOscillating front axle with remote greasingPin-on design preparation for dozer blade and outriggersTool box in undercarriageTires, 10.00-20 16PR, dual18-R 19.5 XF single;600/40-22.5 single;11.00-20 dualTwo-piece drive shaftUpper carriage storage box

OTHER EQUIPMENTAutomatic swing brakeDoor locks and caps locks with Caterpillar one-key

security systemLockable tool box in upper frameMirrors, frame and cabProduct Link ready

ELECTRICALAlternator, 55ampBack-up alarmBoom working lightHeavy duty maintenance free batteriesHornMain shut-off switchRoading lights

ENGINEAutomatic engine speed controlAutomatic starting aidCat 3056E DIT ATAAC U.S. EPA Tier 2 engine,

turbocharged with air-to-air aftercoolerMuffler

HYDRAULICSCat XT-6™ ES hosesLoad-sensing plus hydraulic systemManual work modes (economy, power, travel)Oil coolerSeparate swing pumpStick regeneration circuit

LANGUAGE DISPLAY MONITORClock with 10 day backup batteryFilter/fluid change informationGauges for fuel level, engine coolant temperature

and hydraulic oil temperatureHeadlights indicatorIndicator for engine dial settingPre-start level check for hydraulic oil, engine oil coolantTurn signal indicatorWarning messagesWorking hour information


Optional EquipmentOptional equipment may vary. Consult your Caterpillar dealer for details.

OPERATOR STATIONComfort seat with seat heating and air suspensionFalling Objects GuardFixed cab riser 1200 mm (4 ft)Fixed one-piece front windshieldHeadrestTravel speed lockVandalism guardVisor, rain protection, polycarbonate

UNDERCARRIAGEDozer blade, front and/or rear mounted, with remote greasingOptional tires

11.00-20 dual tires18R 19.5 single tires600/40-22.5 single tiresSpacer rings for dual tires

Outriggers, front and/or rear mountedSecond tool box for undercarriageWide axlesWide dozer blade, front and rear

OTHER EQUIPMENTAdjustable hydraulic sensitivityCat Machine Security SystemCounterweight 3300 kg (7,275 lb)Custom paintJoystick steering

BOOMS AND STICKSOffset boom, 5.2 m (17 ft 1 in)One-piece boom, 5.05 m (16 ft 7 in)Variable adjustable boom (two piece), 5.2 m (17 ft 1 in)2.1 m (6 ft 10 in) stick2.4 m (7 ft 10 in) stick2.6 m (8 ft 6 in) stick3.1 m (10 ft 3 in) Industrial stick

ELECTRICALRefueling pumpRotating beacon on cabWorking lights, cab mounted (front and rear)

HYDRAULICSHammer valveHydraulic lines for quick coupler-boom and stickLowering control devices for boom and stickMulti-function valve, provides up to 5 programmed tools

and tool selection from the cab (including hammer function)Proportional medium pressure functionSynthetic ester based biodegradable hydraulic oil

R

For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com

© 2005 CaterpillarAll Rights Reserved

Printed in U.S.A.

Materials and specifications are subject to change without notice.Featured machines in photos may include additional equipment.

See your Caterpillar dealer for available options.AEHQ5532-01 (4-05)

Replaces AEHQ5532

M316C Wheel Excavator

Documents

Specalog for M316C Wheel Excavator, AEHQ5532-01 · 2 M316C Wheel Excavator The C Series incorporates innovations for improved performance and versatility. Increased lifting capacity,