Assalaamu ‘alaykum wa Rahmatullaahi wa Barakaatuhu.

Space ElevatorA space elevator is conceived as a cable fixed to the equator and reaching into space. A counterweight at the upper end keeps the center of mass well above geostationary orbit level.

A space elevator is a proposed type of space transportation system. Its main component is a ribbon-like cable (also called a tether) anchored to the surface and extending into space. It is designed to permit vehicle transport along the cable from a planetary surface, such as the Earth's, directly into space or orbit, without the use of large rockets.

An Earth-based space elevator consists of a cable with one end attached to the surface near the equator and the other end in space beyond geostationary orbit (35,800 km altitude). The competing forces of gravity, which is stronger at the lower end, and the outward/upward centrifugal force, which is stronger at the upper end, would result in the cable being held up, under tension, and stationary over a single position on Earth.

Once the tether is deployed, climbers would repeatedly climb the tether to space by mechanical means, releasing their cargo to orbit. Climbers would also descend the tether to return cargo to the surface from orbit.[

The concept of a space elevator was first published in 1895 by Konstantin Tsiolkovsky.

His proposal was for a free-standing tower reaching from the surface of Earth to the height of geostationary orbit.

Like all buildings, Tsiolkovsky's structure would be under compression, supporting its weight from below. Since 1959, most ideas for space elevators have focused on purely tensile structures, with the weight of the system held up from above. In the tensile concepts, a space tether reaches from a large mass (the counterweight) beyond geostationary orbit to the ground.

On Earth, with its relatively strong gravity, the required specific strength for the cable material is very high. Current technology is not capable of manufacturing cable materials that are strong and light enough for a space elevator on Earth.

However, in 2000, the recently discovered carbon nanotubes were first identified as possibly being able to meet the specific strength requirements for an Earth space elevator. This sparked a surge of interest and development in space elevators focusing on carbon nanotubes and the similar boron nitride nanotubes.

In 2014, diamond nanothreads were first synthesized.[4] Since they have strength properties similar to carbon nanotubes, diamond nanothreads were quickly seen as a candidate material as well.[5] Nanotubes and diamond nanothreads both hold promise as materials to make an Earth-based space elevator possible.

The concept is also applicable to other planets and celestial bodies. For locations in the solar system with weaker gravity than Earth's (such as the Moon or Mars), the strength-to-density requirements are not as great for tether materials. Currently available materials (such as Kevlar) are strong and light enough that they could be used as the tether material for elevators there

One concept for the space elevator has it tethered to a mobile seagoing platform.

There are a variety of space elevator designs. Almost every design includes a base station, a cable, climbers, and a counterweight. Earth's rotation creates upward centrifugal force on the counterweight. The counterweight is held down by the cable while the cable is held up and taut by the counterweight. The base station anchors the whole system to the surface of the Earth. Climbers climb up and down the cable with cargo.

Base station Cable Climbers Powering climbers Counterweight

The Parts