www.soulcommunication.com.my

CATALOG2010

Fiber Optic PatchCordFiber optic patch cord is used to make fiber optic cabling.Fiber optic patch cord has a thick layer of protection, generally used in the connection to Terminal Box.

LC - LC SM SIMPLEXLC - LC SM DUPLEX LC - FC SM SIMPLEX LC - FC SM DUPLEX

SC - SC SM SIMPLEX SC - SC SM DUPLEXSC - FC SM SIMPLEX SC - FC SM DUPLEX

FC - FC SM SIMPLEX FC - ST SM SIMPLEX FC - E2K SM DUPLEX FC - FC MM SIMPLEX

FC - FC SM DUPLEX FC - E2K SM SIMPLEX FC - ST MM SIMPLEX ST - ST SM DUPLEX

E2K - E2K SM SIMPLEX E2K - E2K SM DUPLEXE2K - SC SM SIMPLEXST - ST SM SIMPLEX

Notes:

FC - ST MM SIMPLEX

FC - E2K SM SIMPLEX

FC - E2K SM DUPLEXST - ST SM SIMPLEX

ST - ST SM DUPLEX

E2K - E2K SM SIMPLEX

E2K - E2K SM DUPLEX E2K - SC SM SIMPLEX

FC - FC SM DUPLEXFC - FC MM SIMPLEX

SC UPC SM

Fiber Optic Pigtail

SC APC SM

LC UPC SM LC UPC OM3 MM 50/125

ST APC SM ST MMST UPC SM

Notes:

SC MM

FC MM FC SM

E2000

LC MM

A short length of optical fiber that is permanently affixed to an active device, e.g, LED or laser diode, and is used to couple the device, using a splice or connector, to a longer fiber

Fiber Optic AdapterFiber optic adapters are used to provide a cable to cable

or cable to equipment fiber optic connection.

Single Mode SC/UPC Simplex Single mode

SC/UPC Duplex Single mode SC/APC Duplex

Single mode SC/APC Duplex

Single mode LC/UPC Simplex

Single mode LC/UPC Simplex

Single mode FC/UPC Squared

Single mode FC/UPC Single D

Single mode FC/UPC Double D

Single mode ST/UPCx

Single mode E2000/APC Simplex

Hybrid Adapter

Notes:

Type Distance PriceLess 2kmLess 5kmLess 10kmLess 25kmLess 2kmLess 5kmLess 10kmLess 25kmLess 2kmLess 5kmLess 10kmLess 25kmLess 2kmLess 5kmLess 10kmLess 25km

MM 10/100/1000Base-T to 1000Base-X

10/100/1000 Mbps

1 x RJ45 with ST or SC connector (dual fiber)

SM 10/100/1000Base-T to 1000Base-X

10/100/1000 Mbps

1 x RJ45 with ST or SC connector (dual fiber)

MM 10/100Base-TX to 100Base-X 10/100 Mbps 1 x RJ45 with ST or SC connector (dual fiber)

SM 10/100 Mbps 1 x RJ45 with ST or SC connector (dual fiber)10/100Base-TX to 100Base-X

Speed PortData Communication

Fiber Optic Ethernet Simple networking devices that make it possible to connect two

dissimilar media types such as twisted pair with fiber optic cabling

Converter

Fiber Optic Protective Sleeve

SL-SGL-40- Sleeve protection - Length: 40mm- Type: Single

SL-SGL-60- Sleeve protection - Length: 60mm- Type: Single

SL-RB-4C-40- Sleeve protection - Length: 40mm- Type: Single- 4 Core

SL-RB-8C-40- Sleeve protection - Length: 40mm- Type: Single- 8 Core

Fiber OpticSplitter

Fiber optic splitter is used to split one beam of optical �ber light into several parts at a certain ratio

Shrinkable sleeve is applied to the optic fiber closure to fix and protect the optic fiber when splicing. The sleeve can be divided into two

types (single and mass) according to the function

PLC Splitter Features

- Low Excess Loss- Low PDL & Good directivity- Good environment stability - Various type are optional - High uniformity- Low insertion loss, Back Re�ection

Fused Splitter Features

- Low insertion loss and PDL- Low polarization dependent loss- High return loss & High reliability- Environmentally stable- Wide operating temperature up to 280

PLC Splitter 19” Rack MountFeatures

- Low Insertion loss- Low PDL & High Reliability- Compact Design & Stability- Good channel-to-channel uniformity- Wide Operating Wavelength: From 1260nm to 1650nm

Fused WDMFeatures

- Ultra Low Excess Loss- Low Polarization Sensitivity- High Directivity & ow cost- Highly Environmental Stability- Telcordia GR-1221-CORE- Robust Package

Splice ClosureA usually weatherproof encasement, commonly made of tough plastic, that envelops the exposed area between spliced cables, i.e., where the jackets have been removed to expose the individual transmission media, optical or metallic, to be joined

SPECIFICATION (mm)

MAX.CAPACITY (core) REMARK PRICE

290×225×105

12

3624

4860

Horizontal type Optional Accessories : Air Valve ,Armor cable wire ,Grounding ,The pole hoop ,Aerial installation hoop ,Wall mounting hoop

SPECIFICATION (mm)

MAX.CAPACITY (core) REMARK PRICE

435×100×190

12

4824

7296

• Horizontal type • 4 inlet/outlet

SPECIFICATION (mm)

MAX.CAPACITY (core) REMARK PRICE

535×110×210

12

4824

7296

• Horizontal type • 4 inlet/outlet

SPECIFICATION (mm)

MAX.CAPACITY (core) REMARK PRICE

435×100×190

12

4824

7296

• RoHS certification • Dome type 5 inlet/outlet • Air Valve and Earthing equipment

SPECIFICATION (mm)

MAX.CAPACITY (core) REMARK PRICE

435×100×190

12

4824

7296

• RoHS certification • Dome type 5 inlet/ outlet • Heat shrink tube and Split clip • Air Valve and Earthing equipment

144

Fiber OpticCables

A cable made of optical �bers that can transmit large amounts of information at the speed of light

PriceSM MM

Core

4 8123648

PriceSM MM

Core

4 8123648

PriceSM MMCore

4 8123648

PriceSM

Core

4 8123648

Indoor Cable: 900µm Tight Bu�ered Cables

MM

Indoor Cable Series (Duplex Zipcord) GJFJBV

Break-Out (36-72) Core Optical Cable

Indoor Cable Series (2-12 Core) GJFJV

Outdoor CablePrice

SMCore

4 8123648

MM

PriceSM

Core

4 8123648

MM

Loose Tube Outdoor Cable

PriceSM

Core

4 8123648

Multi-Core Loose Tube Optical Cable For Indoor Use

Notes:

Fiber OpticTermination Box

Fiber optic terminal box is mainly used for jointing and storage between outer optical �ber(cable) and �ber optic pigtail of equipment,and can be used within outer broadband network cabinet.It's the ideal terminal equipment for FTTH.

Termination Box - 01

- Insulation resistance:≥2X103MΩ/500VDC- Voltage strength:Non-puncture,no arc-over under 15KVDC/1min- Dimension(mm): 180×75×370- Capacity (cores): 96- Weight/unit(kg): 1.1

Speci�cations- Capacity:6 trays(Max),6 cores per tray- Cable inlet-outlet hole:2 units,with their diameter no more than 20mm - Dimension(mm): 180×75×370- Capacity (cores): 96- Weight/unit(kg): 1.1

Termination Box - 02 - 01

Termination Box - 03

Speci�cations- Capacity:6 trays(Max)- 12 cores per tray- Cable inlet-outlet hole:2 units,with their diameter no more than 20mm

Speci�cations- Capacity:8 trays(Max)- 6 cores per tray- Cable inlet-outlet hole:2 units,with their diameter no more than 20mm

Termination Box - 04

Speci�cations

Speci�cations- Capacity:4 trays (Max)- 6 cores per tray- Cable inlet-outlet hole:3 units,with their diameter no more than 16mm(one),12mm (two)

Termination Box - 05

Speci�cations- Insulation resistance:≥2X103MΩ/500VDC- Voltage strength:Non-puncture,no arc-over under 15KVDC/1min- Dimension(mm): 180×75×370- Capacity (cores): 96- Weight/unit(kg): 1.1

Speci�cations- Capacity:4 trays(Max)- 6 cores per tray- Cable inlet-outlet hole::4 units,with their diameter no more than 50mm(two),20mm (two)

Termination Box - 06

Termination Box - 07

Fiber OpticAttenuatorA device which precisely reduces an optical signal from point-to-point.

The loss can beachieved through various technologies such as absorption,scattering, interference (thin film) filter, or air-gap.

SC UPC Attenuator SC APC Attenuator LC UPC Attenuator

LC APC Attenuator FC UPC Attenuator FC APC Attenuator

ST UPC AttenuatorST UPC Attenuator ST UPC Attenuator

Notes:

Cabinets is mainly used for loading �ber optic equipment and cables.Two example of cabinets arewall mounted cabinets and �oor standing cabinets.

19" Wall Mounted Cabinet- 600mm wide.- 6U, 9U, 12U and15U 450mm deep.- 9U and 15U 600mm deep.- Sliding 19” mounting angles front and rear.- Standard ventilation top and bottom.- Vented framed door with safety glass.- Rear panel included.- Easy one man installation.- Heavy duty construction, 60Kgs (UDL).- Comes completely assembled.- Lockable side panels.- Door opens 180°, left or right hinged.- Built in cable strain relief positions.

19" Floor Standing Cabinet- Very strong yet lightweight Aluminium frame and corner castings- Over 800kg Static Load Capacity (UDL)- Available in 600mm and 800mm widths- Available in 600mm, 800mm and 1000mm depths- Available in 27U, 37U, 42U and 47U heights- Patented baying kit- Lockable side panels- Ventilation open area over 55% of available area- Multi function top panels- Toughened glass or fully ventilated steel doors open in excess of 180°- Adjustable feet and heavy duty castors can be �tted at the same time,- making placing in position and levelling a quick and e�cient proccess

The wall box system in its basic form is supplied with the box unloaded ready for you to install the adapter of your choice. The box can also be pre-loaded complete with the required adapter and simple splice management kit, or pre-loaded with pigtails to meet your project need.

Double Door Lockable Wall Box - SC Duplex , LC QuadSpeci�cation- 96 ports- Dimension width: 358 mm- Depth: 121mm- Height: 360 mm- Weight: 6 kg Unloaded- Colour: Grey (RAL7035)- 2 x 20mm and 2 x 25mm- Top and bottom 1 x slotted- Cable exit , top and bottom

Single Door Lockable Wall Box - SC Duplex , LC Quad

Speci�cation- 12 ports- Dimension wifth: 225mm-Depth: 50mm- Height: 270mm- Color: Grey- Weight: 2kg fully loaded cable entry 2 x 20mm gland holes

Wall Boxes

Cabinets