Sopladores Turbo

DUST FILTER COMPONENTS

CertifiedHeader Tank

IN ACCORDANCE TO 87/404/CEE AND 97/23/CE (PED)

Dust Filters Components

CERTIFIED HEADER TANKS

TECHNICAL CHARACTERISTICS

1

Equipmentsensuring avery high levelof protection.Guaranteedoperations incase of possibleerrors.

1 2 D(DustZone 20)

G(Gases, MistsvaporsZone 0)

D(DustZone 21)

G(Gases,mistsvaporsZone 1)

D(DustZone 22)

G(Gases,mistsvaporsZone 2)

Equipmentsensuring ahigh level ofprotection.In case anexplosiveatmosphereoccurs, operationinterruption is possible.

Equipments ensuring avery high level of protection.Explosive atmospheresare present continuously, for longperiod or frequently.

Equipments ensuring ahigh level of protection.Explosive atmospheresare likely to occur.

Equipments ensuring anormal level ofprotection. Explosive atmospheresare unlikely to occur or,if they do occur, are likely to do so only infrequently and for a short period only.

Category M Category 1 Category 2 Category 3

GROUP I(Underground mining, methane

and combustible dust)

GROUP II

(Surface, gas/air or mixture of dust/air, vapors)

CORRESPONDENCE BETWEEN ZONES AND CATEGORIES

COILCoil insulation Class HDIN connector PG 9Protection DIN connector + Coil IP 65 Option DIN connector ATEX + Coil 94/9/CE ATEX Group II Cat.3 GDAmbient Temp. Range -20C ; + 80C Voltages 24DC (+/- 10%) 15 WATT24V / 50-60 hz (+/- 10%) 19VA115V / 50-60 hz (+/- 10%) 19VA230V / 50-60 hz (+/- 10%) 19VA

VALVE CONSTRUCTION Cover Die cast aluminiumBody Die cast aluminiumPilot & plunger Stainless steel Bolts Stainless steelDiaphragm std -40C; + 100COption Viton diaphragm -30C ; + 200CDiaphragm disk Sst

TANK Fluids Compressed air ,dry and oilfreePressure range 0,5 to 7,5 barTemperature range carbon steel -20C ; + 80C Alutank low temperature -40C ; + 80COption ATEX 94/9/CE Group II Cat. 2 GD

TANK CAPACITY Dn 4 (114 mm) 9,5 liters / meterDn 5 (168 mm) 13,70 liters / meterDn 6 (219 mm) 20,10 liters / meter Dn 8 (140 mm) 34,90 liters / meterDn 10 (273 mm) 53,50 liters / meterDn 12 (324 mm) 76 liters / meter

2n GLOBAL IMMERSION HEADER TANK INTEGRAL, TF, TL, TD, PACK SERIESACCORDING TO 87/404 CE

n XTF SST HEADER TANKACCORDING TO PED 97/23/CE

ALUMINIUM GLOBAL IMMERSION HEADER TANK

According to PED 97/23/CE

ATEX II 2GDc ATEX II 3D STANDARD

PED

II 2 GD c

VIA PO 33/3520031 CESANO MADERNO (MI) ITALY

PHONE: ++39 0362 574024FAX: ++39 0362 574092

TURBO SRL

Max pressure 8 BAR Volume lt

Year 200-20

ACCORDING TO

Serial No

TEMP C

CONTROLS

+80

87/404 ID 0066

AX ...

II 3 D


PHONE: ++39 0362 574024FAX: ++39 0362 574092

TURBO SRL


Year 200

ACCORDING TO

Serial No

TEMP C

CONTROLS

+80

87/404 ID 0066

AX1 ...

-20

Year 200

0035

-10 +80

Max pressure (PS) 8 BAR Volume lt

TEMP C(TS)

Serial No

TURBO SRL

PED 97/23/CEACCORDING TOCONTROLS

PHONE: ++39 0362 574024FAX: ++39 0362 574092


A6-

Year 200-20 +80


TURBO SRL

87/404


TEMP C

Serial No

ACCORDING TO

ID 0066

CONTROLS

PHONE: ++39 0362 574024FAX: ++39 0362 574092


PRODUCT RANGE


A1 GLOBAL IMMERSION Series INTEGRAL CE 87/404

A2 GLOBAL IMMERSION Series ALUTANK PED 97/23/CE

A3 THREADED STUB PIPE Series TL CE 87/404FOR STREIGH TROUGHT VALVE

A4 PLAIN STUB PIPE Series TD CE 87/404

A5 THREADED STUB PIPE Series Tf CE 87/404

A6 STAINLESS STEEL Series XTF PED 97/23/CETHREADED STUB PIPE

A7 AIR CANNON Series PACK CE 87/404

A8 BULKHEAD CONNECTORS

A9 BLOW TUBES

3

402450

TANK MODEL:GLOBAL = INTEGRALTHREADED CONNECTION = TF - TLPLAIN CONNECTION = TDALLUMINIUM = ALUTANK

N: NUMBER OF VALVES

P : PITCH

ROUND ENDS = BFLAT ENDS = F

TANK DIAMETER4 = 55 = 56 = 68 = 810 = 1012 = 12

VALVE DIAMETER1/2 = 103/4 = 201 = 2511/2 = 402 = 503 = 75

POWER SUPPLY24V 50-60Hz = 02450110V 50-60Hz = 11050220V 50-60Hz = 2205024Vcc = 024DC

INTEGRAL PILOT = PREMOTE PILOT = M

INTEGRAL 6 P 25 P150N10 B G1example

HEADER TANKS

HOW TO ORDER

BLOW TUBESHORT PLAIN = G1LONG PLAIN = G2LONG THREADED = G3SHORT THREADED = G4

GLOBAL IMMERSION HEADER TANK A1According to 87/404 CE

INTEGRAL Series dn 4 with valves 1/2 4

TU BO

4" INTEGRAL Series dn 4" with valves 1/2"

TU BO

TM

TU BO


TU BO

TM

TU BO


TU BO

TM

DESCRIPTION VALVE SM10/SP10

1 Coil + Din connector BH10...V/50-60Hz2 Screws + Whasher VTE6x18+VROS63 Pole assembly GPC 104 Cover TCOP 105 Spring TMOLL25GNEW6 Diaphragm G10/GMD7 Remote operated cover TCOP10FM

5

1/2

A1 GLOBAL IMMERSION HEADER TANKAccording to 87/404 CE

5 INTEGRAL Series dn 5 with valves 3/4 SERIE INTEGRAL 5" COMPLETO DI VALVOLE 3/4"A1 - SERBATOI AD IMMERSIONE GLOBALE

G1 G2 G3 G4

Pag. 03

SHORT PLAIN TUBE = G1LONG PLAIN TUBE = G2THREADED LONG TUBE = G3THREADED SHORT TUBE = G4

BRACKET

COLLAR

BRACKETS

CS = COLLARSA = HIGH BRACKETSM = MEDIUM BRACKETSB = SMALL BRACKET

SERIE INTEGRAL 5" COMPLETO DI VALVOLE 3/4"A1 - SERBATOI AD IMMERSIONE GLOBALE

G1 G2 G3 G4

Pag. 03


BRACKET

COLLAR

BRACKETS



G1 G2 G3 G4

Pag. 03


BRACKET

COLLAR

BRACKETS



G1 G2 G3 G4

Pag. 03


BRACKET

COLLAR

BRACKETS



1 Coil + Din connector BH10...V/50-60Hz2 Screws + Whasher TE6x18+VROS63 Pole assembly GPC 104 Cover TCOP 255 Cover remote operated TCOP25FM6 Diaphragm M25

3/4

6


INTEGRAL Series dn 6 with valves 3/4 6SERIE INTEGRAL 6 " COMPLETO DI VALVOLE 3/4"A1 - SERBATOI AD IMMERSIONE GLOBALE

G1 G3G2 G4

Pag. 04

BRACKETS


BRACKET

COLLAR


SERIE INTEGRAL 6 " COMPLETO DI VALVOLE 3/4"A1 - SERBATOI AD IMMERSIONE GLOBALE

G1 G3G2 G4

Pag. 04

BRACKETS


BRACKET

COLLAR



G1 G3G2 G4

Pag. 04

BRACKETS


BRACKET

COLLAR



G1 G3G2 G4

Pag. 04

BRACKETS


BRACKET

COLLAR



1 Coil + Din connector BH10...V/50-60Hz2 Screws + Whasher TE6x18+VROS63 Pole assembly GPC 104 Cover TCOP 255 Remote operated cover TCOP25FM6 Diaphragm M25

3/4

7


6 INTEGRAL Series dn 6 with valves 1

Pag. 05

G4G2 G3G1

SERIE INTEGRAL 6" COMPLETODI VALVOLE 1"A1 - SERBATOI AD IMMERSIONE GLOBALE

BRACKETS


BRACKET

COLLAR


Pag. 05

G4G2 G3G1


BRACKETS


BRACKET

COLLAR


Pag. 05

G4G2 G3G1


BRACKETS


BRACKET

COLLAR


Pag. 05

G4G2 G3G1


BRACKETS


BRACKET

COLLAR




1

8


INTEGRAL Series dn 6 with valves 11/2 6A1 - SERBATOI AD IMMERSIONE GLOBALESERIE INTEGRAL 6" COMPLETO DI VALVOLE 1"

G1 G3G2 G4

Pag. 06

BRACKETS


BRACKET

COLLAR


A1 - SERBATOI AD IMMERSIONE GLOBALESERIE INTEGRAL 6" COMPLETO DI VALVOLE 1"

G1 G3G2 G4

Pag. 06

BRACKETS


BRACKET

COLLAR



G1 G3G2 G4

Pag. 06

BRACKETS


BRACKET

COLLAR



G1 G3G2 G4

Pag. 06

BRACKETS


BRACKET

COLLAR



1 Coil + Din connector BH10...V/50-60Hz2 Screws + Whasher VTE6x20+VROS63 Pole assembly GPC 104 Cover TCOP 105 Remote operated cover TCOP10FM6 Spring TMOL10GNEW7 Diaphragm M108 Screws + Whasher VTE8x20+VROS89 Cover TCOP35N10 Spring TMOL40/45G11 Main diaphragm M35-S

11/2

9


8 INTEGRAL Series dn 8 with valves 1SERIE INTEGRAL 8" COMPLETO DI VALVOLE 1"A1 - SERBATOIO AD IMMERSIONE GLOBALE

Cat TurboEd. Aprile 06'

G1 G3G2 G4

Pag. 07

BRACKETS


BRACKET

COLLAR


SERIE INTEGRAL 8" COMPLETO DI VALVOLE 1"A1 - SERBATOIO AD IMMERSIONE GLOBALE


G1 G3G2 G4

Pag. 07

BRACKETS


BRACKET

COLLAR




G1 G3G2 G4

Pag. 07

BRACKETS


BRACKET

COLLAR




G1 G3G2 G4

Pag. 07

BRACKETS


BRACKET

COLLAR




1

10


INTEGRAL Series dn 8 with valves 11/2 8A1 - SERBATOI AD IMMERSIONE GLOBALESERIE INTEGRAL 8" COMPLETO DI VALVOLE 1"


G1 G3G2 G4

Pag. 08

BRACKETS


BRACKET

COLLAR




G1 G3G2 G4

Pag. 08

BRACKETS


BRACKET

COLLAR




G1 G3G2 G4

Pag. 08

BRACKETS


BRACKET

COLLAR




G1 G3G2 G4

Pag. 08

BRACKETS


BRACKET

COLLAR



1 Coil + Din connector BH10...V/50-60Hz2 Screws + Whasher VTE6x20+VROS63 Pole assembly GPC 104 Cover TCOP 255 Remote operated cover TCOP 25FM6 Diaphragm M257 Screws + Whasher VTE8x20+VROS88 Cover TCOP40N9 Spring TMOL4010 Main diaphragm M40

11/2

11


INTEGRAL Series dn 10 with valves 11/2 SERIE INTEGRAL 10" COMPLETO DI VALVOLE 1"A1 - SERBATOI AD IMMERSIONE GLOBALE


G1 G3G2 G4

Pag. 09

BRACKETS

CS = COLLARSA = HIGH BRACKETSA = MEDIUM BRACKETSB = SMALL BRACKET

BRACKET

COLLAR


SERIE INTEGRAL 10" COMPLETO DI VALVOLE 1"A1 - SERBATOI AD IMMERSIONE GLOBALE


G1 G3G2 G4

Pag. 09

BRACKETS


BRACKET

COLLAR




G1 G3G2 G4

Pag. 09

BRACKETS


BRACKET

COLLAR




G1 G3G2 G4

Pag. 09

BRACKETS

CS = COLLARSA = HIGH BRACKETSA = MEDIUM BRACKETSB = SMALL BRACKET

BRACKET

COLLAR



1 Coil + Din connector BH10...V/50-60Hz2 Screws + Whasher VTE6x20+VROS63 Pole assembly GPC 104 Cover TCOP 255 Cover remote operated TCOP25FM6 Diaphargm M257 Screws + Whasher VTE8x20+VROS88 Cover TCOP40N9 Spring TMOL4010 Main diaphragm M40

10

11/2

12


INTEGRAL Series dn 10 with valves 2 10

Cat Turbo Ed. Aprile 06'

G1 G2 G3 G4

Pag. 10


BRACKETS


BRACKET

COLLAR



G1 G2 G3 G4

Pag. 10


BRACKETS


BRACKET

COLLAR



G1 G2 G3 G4

Pag. 10


BRACKETS


BRACKET

COLLAR



G1 G2 G3 G4

Pag. 10


BRACKETS


BRACKET

COLLAR



1 Coil + Din connector BH10...V/50-60Hz2 Screws + Whasher VTE6x20+VROS63 Pole assembly GPC 104 Cover TCOP 255 Remote operated cover TCOP 25FM6 Diaphargm M257 Screws + Whasher VTE10x25+VROS108 Cover TCOP509 Spring TMOL4010 Main diaphragm M50

2

13


INTEGRAL Series dn 12 with valves 21/2 12" INTEGRAL Series dn 12" with valves dn 212"

TU BO

SHORT PLAIN TUBE = G1LONG PLAIN TUBE = G2THREADED LONG TUBE = G3

SM60

SP60

G1 G2 G3

12" INTEGRAL Series dn 12" with valves dn 212"

TU BO


SM60

SP60

G1 G2 G3


TU BO


SM60

SP60

G1 G2 G3


1 Coil + Din connector BH10...V/50-60Hz2 Screws + Whasher VTE6x20+VROS63 Pole assembly GPC 104 Cover TCOP 255 Remote operated cover TCOP25FM6 Diaphargm M257 Screws + Whasher VTE10x25+VROS108 Cover TCOP50G9 Spring TMOL4010 Main diaphragm M5011 Spring TMOL10G

12

21/2

14


INTEGRAL Series dn 12 with valves 3 1212" INTEGRAL Series dn 12" with valves dn 3"

BOTU


33


G1 G2 G3 G4

Pag. 10


BRACKETS


BRACKET

COLLAR



BOTU


3


1 Coil + Din connector BH10...V/50-60Hz2 Screws + Whasher VTE6x20+VROS63 Pole assembly GPC 104 Cover TCOP 255 Cover remote operated TCOP 25FM6 Diaphargm M257 Screws + Whasher VTE10x25+VROS108 Cover TCOP559 Spring TMOL4010 Main diaphragm M55

3

15

A2 ALUMINIUM GLOBAL IMMERSION HEADER TANKAccording to PED 97/23/CE

Series ALUTANK with valve dn 1


G1 G4G3G2

Pag. 17

SERIE ALUTANK 6"COMPLETO DI VALVOLE 1"A5 - SERBATOI IN ALLUMINIO AD IMMERSIONE GLOBALE (PED 97/23)


MOUNTING HOLES

Pressure Supply 1"

Connections 1/4"

AIR PRESSURE

AIR PRESSURE


G1 G4G3G2

Pag. 17



MOUNTING HOLES

Pressure Supply 1"

Connections 1/4"

AIR PRESSURE

AIR PRESSURE


G1 G4G3G2

Pag. 17



MOUNTING HOLES

Pressure Supply 1"

Connections 1/4"

AIR PRESSURE

AIR PRESSURE


G1 G4G3G2

Pag. 17



MOUNTING HOLES

Pressure Supply 1"

Connections 1/4"

AIR PRESSURE

AIR PRESSURE

TECHNICAL CARECTERISTICS

TankExtruded anodized aluminium

EndsDiecast aluminium

Blow tubeSteel zinc plated

O-RingsNBR

Temperature range-10C +80C

Operating pressure0,5 : 6 BAR - 0,5 : 8 BAR

Low temperature- 40C +80C

with SST blow tube

DESCRIPTION VALVE SQP25/SQM25

1 Coil + Din connector BH10...V/50-60Hz2 Screws + Whasher VTE6x18+VROS63 Pole assembly GPC 104 Cover TCOP 255 Cover remote operated TCOP25FM6 Diaphragm M257 Body TCOR25IMO

6

1

16

SERIE ALUTANK 6" COMPLETO DI VALVOLE 1"A5 - SERBATOI IN ALLUMINIO AD IMMERSIONE GLOBALE (PED 97/23)


G1 G3G2 G4

Pag. 18


AIR PRESSURE

AIR PRESSURE

MOUNTING HOLES

Pressure Supply 1"

Connections 1/4"



G1 G3G2 G4

Pag. 18


AIR PRESSURE

AIR PRESSURE

MOUNTING HOLES

Pressure Supply 1"

Connections 1/4"



G1 G3G2 G4

Pag. 18


AIR PRESSURE

AIR PRESSURE

MOUNTING HOLES

Pressure Supply 1"

Connections 1/4"



G1 G3G2 G4

Pag. 18


AIR PRESSURE

AIR PRESSURE

MOUNTING HOLES

Pressure Supply 1"

Connections 1/4"

DESCRIZIONE VALVE SQP35/SQM35

1 Coil + Din connector BH10...V/50-60Hz2 Screws + Whasher VTE6x18+VROS63 Pole assembly GPC 104 Cover TCOP 105 Cover remote operated TCOP 10FM6 Spring TMOL25GNEW7 Diaphargm M108 Screws + Whasher VTE6x20+VROS69 Cover TCOP35N10 Spring TMOL40/45G11 Main diaphragm M35-S12 Body TCOR35FMGS

11/2

ALUMINIUM GLOBAL IMMERSION HEADER TANK A2According to PED 97/23/CE

Series ALUTANK with valve dn 11/2 6

TECHNICAL CARECTERISTICS

TankExtruded anodized aluminium

EndsDiecast aluminium

Blow tubeSteel zinc plated

O-RingsNBR

Temperature range-10C +80C

Operating pressure0,5 : 6 BAR - 0,5 : 8 BAR

Low temperature- 40C +80C

with SST blow tube

17

A3 HEADER TANK WITH THREADED STUB PIPES According to 87/404 CE

Series TF dn 5 - 6 - 8 - 10 TF

Cat Turbo Ed. Aprile 06' Pag. 11

A2 - SERBATOI 5" 6" 8" 10"CON TRONCHETTI FILETTATISERIE TF

Pitch mm; N = Quantity of stub pipes







(est) mm E A B(min) F H M R Z() S() P(min)

5 140 3/4 50 40 1 15 85 40 120 190 855 140 1 50 40 1 15 85 40 120 190 856 168,3 3/4 50 40 1 15 85 40 120 204 856 168,3 1 50 40 1 15 85 40 120 204 856 168,3 11/2 50 40 1 15 85 40 136 220 1508 219,1 1 70 40 11/2 18 85 40 120 229 858 219,1 11/2 70 40 11/2 18 85 40 136 245 1508 219,1 2 70 65 11/2 18 75 40 164 273 21010 273 11/2 90 40 11/2 18 85 40 136 272 15010 273 2 90 65 11/2 18 75 40 164 300 21010 273 21/2 90 65 11/2 18 75 40 164 300 210

18

THREADED STUB PIPE HEADER TANK A3According to PED 97/23/CE

Series TF dn 5 - 6 - 8 - 10 TF A2 - SERBATOI 5" 6" 8" 10"CON TRONCHETTI FILETTATI


SERIE TF

Pag. 12

DESCRIPTION VALVE FP/FM20 VALVE FP/FM25

1 Coil + Din connector BH10...V/50-60Hz BH10...V/50-60Hz2 Screws + Whasher VTE6x20+VROS6 VTE6x20+VROS63 Pole assembly GPC 10 GPC 104 Cover TCOP25 TCO255 Diaphargm M25 M256 Body TCOR20FFG TCOR25FFG7 Cover remote operated TCOP25FM TCOP25FM

DESCRIPTION VALVE FP/FM40 VALVE FP/FM55 VALVE FP/FM65

1 Coil + Din connector BH10...V/50-60Hz BH10...V/50-60Hz BH10...V/50-60Hz2 Screws + Whasher VTE6x20+VROS6 VTE6x20+VROS6 VTE6x20+VROS63 Pole assembly GPC 10 GPC 10 GPC 104 Cover TCOP 25 TCOP 25 TCOP 255 Diaphargm M25 M25 M256 Screws + Whasher VTE8x20+VROS8 VTE10x25+VROS10 VTE10x25+VROS107 Cover TCOP40 TCOP65G TCOP65G8 Spring TMOL40 TMOL40 TMOL409 Main diaphragm M40 M55 M6510 Body TCOR40FFG TCOR55FFG TCOR65FFG11 Cover remote operated TCOP 25FM TCOP 25FM TCOP 25FM

19

20

From

R.&D. a new pulse valve

THE DESIGN OFFERS EASEOF MAINTENANCE THANKSTO HORIZONTAL POSITION

INTEGRATED COMPRESSION FITTINGCONNECTOR ELIMINATES THE NEED FOR SEPARATEBULKHEAD CONNECTOR

SAVING & FLEXIBILITYThe double advantage solution!

SAVING & FLEXIBILITYThe double advantage solution!

21

DIRECT INSTALLATION THROUGHTHE BAG HOUSE WALL

SAME COMPONENTS THROUGH ALLTURBO PULSE VALVES RANGE

A4 HEADER TANK WITH THREADED STUB PIPES According to 87/404 CE

Series TL dn 6- 8 straight through dn1TL A2 - SERBATOI CON TRONCHETTI FILETTATI PER VALVOLA IN LINEA 1"


SERIE TL

Pag. 13

NN = Quantity of stub pipesQuantity of stub pipes

TANK

VALVEFILTER WALL

BLOW TUBE

BRACKET TANK 6"

CS = COLLARS6-223 = BRACKET

BRACKET TANK 8"


COLLAR

A = 223 A = 249

BRACKET

COLLAR

BRACKET

A2 - SERBATOI CON TRONCHETTI FILETTATI PER VALVOLA IN LINEA 1"


SERIE TL

Pag. 13

N = Quantity of stub pipes

TANKTANK

VALVEVALVEFILTER WALLFILTER WALL

BLOW TUBEBLOW TUBE

BRACKET TANK 6"


BRACKET TANK 8"


COLLAR

A = 223 A = 249

BRACKET

COLLAR

BRACKET

mm A B(min) F H M R P(min) Z() S()

6 168,3 50 40 1 15 45 20 85 191 2238 219,1 70 40 11/2 18 45 20 85 191 249



SERIE TL

Pag. 13


TANK

VALVEFILTER WALL

BLOW TUBE

BRACKET TANK 6"


BRACKET TANK 8"8"

CSCS = COLLAR= COLLARS8-249 = BRACKETS8-249 = BRACKET

COLLAR

A = 223 A = 249A = 249

BRACKET

COLLARCOLLAR

BRACKETBRACKET



SERIE TL

Pag. 13


TANK

VALVEFILTER WALL

BLOW TUBE

BRACKET TANK 6"6"

CSCS = COLLAR= COLLARS6-223 = BRACKETS6-223 = BRACKET

BRACKET TANK 8"


COLLARCOLLAR

A = 223A = 223 A = 249

BRACKETBRACKET

COLLAR

BRACKET

22

THREADED STUB PIPE HEADER TANK A4According to 87/404 CE

Series TL /Part List TL

Pag. 14

A3 - SERBATOI CON TRONCHETTI FILETTATISERIE TL : PART LIST

FDP/FDM

DESCRIPTION VALVE FDP25/FDM25

1 Coil + Din connector BH10...V/50-60Hz1 2 Screws + Whasher VTE6x18 + VROS63 Pole assembly GPC104 Cover TCOP255 Cover remote operated TCOP 25FM6 Diaphargm + Spring M25 + TMOL 10G7 Body TCOR25FLG/IN-OUT8 Washer TROND 53x67x5/HO9 Lock nut TGBA2510 Seal GCON2511 Seal retainer OG2512 Compression nut TDAL25

23

Compression fitting outlet

A5 HEADER TANK WITH PLAIN STUBSAccording to 87/404 CE

Series TD dn 5 - 6 - 8 - 10TD


A4 - SERBATOI CON TRONCHETTI LISCI

SERIE TD

Pitch mm; N = Quantity of stubs



SERIE TD




SERIE TD


(est)mm E A B(min) F(GAS) H M Z() S() P(min)

5 140 3/4 50 40 1 15 85 127 197 855 140 1 50 40 1 15 85 130 200 856 168,3 3/4 50 40 1 15 85 127 211 856 168,3 1 50 40 1 15 85 130 214 856 168,3 11/2 50 40 1 15 85 138 222 1508 219,1 1 70 40 11/2 18 85 130 240 858 219,1 11/2 70 40 11/2 18 85 138 248 15010 273 11/2 90 40 11/2 18 85 130 267 150

24

HEADER TANK WITH PLAIN STUBS A5According to 87/404 CE

Series TD dn 5 - 6 - 8 - 10 TD


SERIE TD

DESCRIPTION VALVE DP/DM20 VALVE DP/DM25

1 Coil + Din connector BH10...V/50-60Hz BH10...V/50-60Hz2 Screws + Whasher VTE6x20+VROS6 VTE6x20+VROS63 Pole assembly GPC 10 GPC 104 Cover TCOP 25 TCOP 255 Diaphargm M25 M256 Body TCOR20/25MMG TCOR25MMG7 Seal GCON20 GCON258 Seal retainer OG20 OG259 Compression nut TDAL20/25 TDAL2510 Cover remote operated TCOP 25FM TCOP 25FM

DESCRIPTION VALVE DP40/DM40

1 Coil + Din connector BH10...V/50-60Hz2 Screws + Whasher VTE6x20 + VROS63 Pole assembly GPC 104 Cover TCOP 255 Diaphargm M256 Screws + Whasher VTE8x20 + VROS87 Cover TCOP40N8 Spring TMOL409 Main diaphargm M4010 Body TCOR40MMG11 Seal GCON4012 Seal retainer OG2013 Compression Nut TDAL4014 Cover remote operated TCOP 25FM

25

A6 STAINLESS STEEL HEADER TANKS WITH THREADED STUB PIPESAccording to PED 97/23/CE

XTF Series dn 5 - 6 - 8

26

A2 - STAINLESS STEEL HEADER TANKS WITH THREADED VALVES

Series dn 5" - 6" - 8"

According to PED97/23/CE

XTF

BOTU

(nom) (est) E (GAS) A B (min) F (GAS) H M R Z () S () P (min)

5 140 3/4 50 40 1 15 85 40 120 190 85

5 140 1 50 45 1 15 85 40 120 190 85

5 140 11/2 50 50 1 15 85 40 120 190 150

6 168,3 3/4 50 40 1 15 85 40 120 204 85

6 168,3 1 50 45 1 15 85 40 120 204 85

6 168,3 11/2 50 50 1 15 85 40 136 220 150

6 168,3 2 50 60 1 15 85 40 164 248 210

8 219,1 1 70 45 11/2 18 85 40 120 229 85

8 219,1 11/2 70 50 11/2 18 85 40 136 245 150

8 219,1 2 70 60 11/2 18 85 40 164 273 210

8 219,1 21/2 70 65 11/2 18 85 40 164 273 210


Series dn 5" - 6" - 8"


XTF

BOTU


Series dn 5" - 6" - 8"


XTF

BOTU

Cat. Turbo Ed. Giugno 05' Pag. 19

SERIE PACKA6 - SERBATOI DISIMPACCAMENTO

Cat. Turbo Ed. Giugno 05' Pag. 19

SERIE PACKA6 - SERBATOI DISIMPACCAMENTO

Type A B C E F G H I L M N O P

PACK 5 512 140 (5) 100 52 3/4 90,9 73 38 232 150 120 13 1/2PACK 15 868 168,3 (6) 124 52 1 101,6 73 38 368 280 160 13 1/2PACK 25 895 219,1 (8) 160 71 11/2 133,5 135 62 375 320 260 13 1/2PACK 50 1174 273 ( 10) 214,5 203 2 197,6 190 83 539 320 260 13 1/2

AIR CANNON A7According to 87/404 CE

Series PACK PACK

27


P Series PS/PD

Cat. Turbo Ed. Aprile 06' Pag. 22

SERIE P

A8 - RACCORDI RAPIDI PASSAPARETE

C at. Turbo Ed. Aprile 06' Pag. 22

SERIE P


TECHNICAL CARACTERISTICS

Body, lock nut, compression nut Die cast aluminiumSeal NBR -30C / +100C

Silicon -60C / +200C

WALL MOUNTING HOLE

3/4 Wall hole min. 561 Wall hole min. 5611/2 Wall hole min. 722 Wall hole min. 83

Type A B C1 D E F Weight (Kg)

PS20 3/4 10,5 12,5 67 35 56 0,5PS25 1 10,5 12,5 67 35 56 0,4PS40 11/2 14,8 16,5 92 40 79 0,8

Type A B B1 C D E F Weight (Kg)

PD20 3/4 10,5 12,5 35 105 50 39 0,7PD25 1 10,5 12,5 35 105 50 39 0,6PD40 11/2 14,8 14,8 40 140 67 55 1,2PD50 2 14,3 19 48 139,5 66,2 53 1,35

PS

PD

28

29

DESCRIPTION PS20 PS25 PS40

1 Compression nut TDAL20/25 TDAL25 TDAL402 Seal retainer OG20 OG25 OG403 Seal G CON20 G CON25 G CON404 Lock nut TGBA25 TGBA25 TGBA405 Washer TFIBRA70x54x1,5 TFIBRA70x54x1,5 TFIBRA90x70x1,56 Body TPAS20 TPAS25 TPAS40

DESCRIPTION PD20 PD25 PD40

1 Compression nut TDAL20/25 TDAL25 TDAL402 Seal retainer OG20 OG25 OG403 Seal G CON20 G CON25 G CON404 Lock nut TGBA25 TGBA25 TGBA405 Washer TFIBRA70x54x1,5 TFIBRA70x54x1,5 TFIBRA90x70x1,56 Body TPAS20 TPAS25 TPAS40

BULKHEAD CONNECTORS A8

Series PS/PD P


A8 - RACCORDI RAPIDI PASSAPARETESERIE PS/PD


MOUNTING LAYOUT

30

INTEGRAL

TURBO STRAIGHT TROUGH VALVE

Series INTEGRAL INTEGRAL

TURBO STRAIGHT TROUGH VALVE

Turbo straight trough valve

31

BULCKHEAD CONNECTORS A8

MOUNTING LAYOUT P


SERIE P

SCHEMA DI MONTAGGIO


BRACKETBRACKET

BULKEAD CONNECTORBULKEAD CONNECTOR

BULKEAD CONNECTOR

BULKEAD CONNECTOR

HEADER TANK

HEADER TANKHEADER TANK

FFILTER WALLILTER WALL

FILTER WALL

FILTER WALLHEADER TANK

A


SERIE P

SCHEMA DI MONTAGGIO


BRACKET

BULKEAD CONNECTOR


BULKEAD CONNECTOR

HEADER TANKHEADER TANK

HEADER TANK

FILTER WALL

FFILTER WALLILTER WALL

FILTER WALLHEADER TANK

A

Mounting layout with tank Series INTEGRAL

Mounting layout with two pieces blow tubes


SERIE P

SCHEMA DI MONTAGGIO


BRACKET

BULKEAD CONNECTOR

BULKEAD CONNECTOR


HEADER TANK

HEADER TANK

FILTER WALL

FILTER WALL

FFILTER WALLILTER WALLHEADER TANKHEADER TANK

AA

Mounting layout with one piece blow tube

A9 BLOW TUBE

TS Series TS

D10 L150 F200 H15 A2 T2TS: BLOW TUBE

P: INJECTOR PITCH

N: Q.TY OF INJECTOR

D: INJECTOR DIAMETER

H: INJECTOR HEIGHT

L: DISTANCE BETWEEN FILTER WALL

AND INJECTOR

A1: PLAIN

A2: THREADED

T1: BRACKET

T2: PLUG

F: DISTANCE BETWEEN INJECTORTO END OF B.T.

HOW TO ORDERTS 25 P100 N10


A7 - TUBI SOFFIATORI

A1

A2

Pag. 21

T1

T2



A1

A2

Pag. 21

T1

T2



A1

A2

Pag. 21

T1

T2

DESCRIPTION

1 Tube2 Injector3 O-Ring4 Plug5 Bracket6 Screws

D: BLOW TUBE DIAMETER

20 3/4

25 1

40 11/2

50 2

32

ATEX PULSE VALVE

ATEX

ELETTROVALVOLE CON CERTIFICAZIONE ATEX

Rispetto alle versioni standard, le valvole ATEX con marcatura EXII3GD, sono dotate dibobine e connessioni specifiche che le rendono idonee ad un utilizzo in zona 22,mantenendo un ingombro praticamente identico.

A differenza della versione precedente, le valvole ATEX con marcatura EXII2GD, sonodotate di corpo valvola in ottone, che lo rendono idoneo ad un utilizzo in zona 21 oltread un pilotaggio ad una distanza di 10 mt max (nelle versioni con pilota remoto).

Pag. 26

ELETTROVALVOLE CON CERTIFICAZIONE ATEX

Rispetto alle versioni standard, le valvole ATEX con marcatura EXII3GD, sono dotate dibobine e connessioni specifiche che le rendono idonee ad un utilizzo in zona 22,mantenendo un ingombro praticamente identico.

A differenza della versione precedente, le valvole ATEX con marcatura EXII2GD, sonodotate di corpo valvola in ottone, che lo rendono idoneo ad un utilizzo in zona 21 oltread un pilotaggio ad una distanza di 10 mt max (nelle versioni con pilota remoto).

Pag. 26

ATEX II3GD (ZonE 2 e 22)

ATEX II2GD (Zone 1 e 21)

TURBO PULSE VALVE for potentially explosive atmos-pheres according to ATEX 94/9/EC.

Valve is provided with moulded coil and connector IP65suitable for Zone 2 and 22.

Valve dimensions are same of standard model.

TURBO PULSE VALVE for potentially explosive

atmospheres according to ATEX 94/9/EC.

Valve use encapsulated moulded soil with leads

wire of different length.

Pilot valve has brass body that change valve

dimensions from standard model.

33

TURBO srlvia Po, 33

20031 CESANO MADERNOMilano (ITALY)

phone ++39 0362 574024fax ++39 0362 574092

[email protected]

- All rights reserved. Design and specifications are subject to change without notice.CATCHT 12/08


PulseValvesfor Dust Collector Filters

Electronic Controlsfor Dust Collector Filters


Documents

Sopladores Turbo