Embed Size (px)
Citation preview
The Sonic Shock-Wave ToolThe Latest Oil-Well Stimulation Enhancement Tool
WM Oilfield Services, Inc.P.O. Box 1347McCamey, TX 79752o: 432-652-3795f: 432-652-3133
Willie Mosley, [email protected]
Made & distributed by:W.M. Oilfield Services, Inc. Logo
Upon activation, the Sonic Shock-Wave tool successively pulses fluid out of its multiple ports. As each pulse of fluid accelerates out of the ports, the fluid shock waveis formed due to abrupt acceleration and deceleration of the fluid being used. This shock wave is commonly called a ‘water hammer.’
The Sonic Shock-Wave toolis a well stimulation enhancement apparatus that creates a fluid shock wave that travels through fluid into formation that is being treated.
How Does It Work?The Sonic Shock-Wave tool is activated with fluid velocity pumped through the tool itself. The fluid activates a diverter device, which in turn opens and closes posts in succession to create a pulse of burst with high inertial forces. This pulse or burst forms a fluid shock wave in the well-bore fluid. The fluid shock wave will travel spherically from its point of origin through the well-bore fluid and into the formation as far as there is fluid. The sonic tool intensifies well stimulation treatments with the use of less treating fluids.
The Sonic Shock-Wave tool can be ran in 4 di�erent methods:• Blow a packer (referred to as the Isolation Method)• Between 2 packers (referred to as the Straddle Packer Method)• Between a packer and a bridge plug• Ran on its own
When the Sonic Tool is used with any of these methods, the fluid shock wave becomes trapped intensifying the e�ect on the treated formation.
Other AdvantagesUsing the Sonic Tool will remove well-bore damage suchas scales, formation fines, perforation debris, and other typesof plugging material. The shock wave causes these materialsto reach their fatigue failure point.
The Sonic Shock-Wave tool method of well stimulation enhancementhas been successfully used on -• newly completed oil and gas wells• older producing oil and gas wells• injection and disposal wells.
IsolationExpansion
PackerMethod
StraddlePackerMethod
OpenHole Blast
Method
HighPressure
Perf. CleanMethod
