Solutions Partner Catalog Keysight Technologies & TOYO ... … · enrich technical training for employees. In recent years, ... Cellular phones (GSM, WCDMA), ... Spectrum analyzer

Solutions Partner CatalogKeysight Technologies & TOYO Corporation

EMC Measurements

Emission Measurement Software ……………………………………………………………… 4

Immunity Test Software ………………………………………………………………………… 5

EMI Measurement System ……………………………………………………………………… 6

TEM-wave Large-bandwidth Transmission Line System G-CELL ……………………… 8

GTEM CELL ……………………………………………………………………………………… 10

Common Mode Noise Measurement System TS1000 ………………………………… 12

Oscilloscope for Immunity Pulse Waveform Observation ……………………………… 13

Radiated/Conducted Immunity Test System …………………………………………… 14

For Shielding Material Permeation Loss Measurement ………………………………… 16

Table of Contents

| Keysight | Solutions Partner Catalog TOYO Corporation EMC Measurements02

About TOYO CorporationTOYO Corporation, as an expert in measurement technology, has been

proactively breathing fresh life into the sunrise industry such as energy and

environment, along with its mainstream business including electromagnetic

interference measurement and communication measurement. Striving for a

name trusted in the market innovation technology, not only a measurement

technology provider, we, at TOYO, redouble our efforts to expand the

laboratories, impart technical knowledge, improve the training facilities and

enrich technical training for employees.

In recent years, TOYO has been delivering carefully needs-matched solutions

to each customer through self-developed system products and will be

committed to promptly catering to the demand for technological innovation

with a reinforced development group.

Technology Interface Center

“Measurement”echnology constitutesthe mainstay of all businesses -this is what TOYO believes.


EMC Measurements

Emission Measurement SoftwareOverviewWith electronic devices going digital and mobile through high-density implementation, it is getting more difficult to isolate noise sources, and more cost- and time-consuming to implement appropriate EMI remedies against them.TOYO EP7 software, which is designed for EMI evaluation measurements, collects and saves a greater-than-ever amount of data on the complicated noises emitted by such digital devices, thereby detecting noises that could not be captured before through automated measurements with enhanced speed and reliability. Furthermore, the EP7 has reinforced functionality for the post-measurement evaluation and analysis of DUT through multi-angle visualization of an enormous amount of measurement data among other means.TOYO EP9 software, which is meant for automobile EMI measurements, has been developed to be compliant with diversifying international and automobile manufacturers’ own standards. The EP9 adopts a matrix system that allows users to narrow down measurement conditions simply by selecting a standard and a transducer.

Software－ EP5/RE : Radiated emission measurement software－ EP9/CE : Conducted emission measurement software－ EP5/REP : RF power emission measurement software － EP5/NSA : Site attenuation measurement software－ EP7/RE : Radiated emission measurement software－ EP7/CE : Conducted emission measurement software－ EP5/RSE : Radiated Spurious emission measurement software － EP9/VE : Radiated emisson measurement software for vehicle

Applicable standards－ Consumer product standards : CISPR, EN, ETS, FCC, VCCI－ Wireless Application standards : TS51.010-1, TS34.121 (3GPP),

Cellular phones (GSM, WCDMA), EN300 328, EN301 893 (ETSI)

－ Automotive standards : UN/ECE R10, CISPR12, CISPR25, SAE, JASO

Basic measurement function－ Spectrum data acquisition－ Maximum radiation position measurement (azimuth/height pattern, clamp position)－ Quasi-peak(QP)/Average(AV) measurement according to CISPR Pub. 16－ Measurement result display/output/edit/save

Feature－ Sophisticated user interface－ Flexibility in window layout setting－ Measurement procedure reduces measurement time－ Instrument and system self-diagnostic function－ Spectrum overwrite function efficient for corrective action－ Measurement result data aditable by MS-Word and Excel－ Capable of saving standard limits, factors, measurement system gain/loss, and

measurement conditions to files, enabling them to be set, edited, and created easily.－ Capable of changing limits freely after measurement－ Template feature allowing icons to be assigned to individual tests－ Support for many types of hardware products of various manufactures－ Assorted password function for distinguishing between measurement operator

and administrator

EP7/RE : radiated emission measurement software Display of 3D Time Domain

EP7/RE : radiated emission measurement software Display of 3D radiation pattern

EP7/RE : Radiated emission measurement software Display of measurement

EP9/VE : Radiated emission measurement software for vehicle Display of measurement


Software－ M5/RS : Radiated immunity test software－ IM5/CS : Conducted immunity test software－ IM5/A : Audio immunity test software－ IM5/V : TV/Video immunity test software－ VI5/RS : Vehicle radiated immunity test software

Applicable standards－ Consumer product standards : IEC61000-4-3,-6, CISPR24, EN－ Automotive standards : UN/ECE R10, SAE, JASO, GM/Ford standards (radar pulse)

Standards in other auto manufacturers－ MIL standards : Standards for medical device

Basic measurement function－ Electric field uniformity measurement－ System linearity testing－ Electric field reference measurement/ Electric field check－ Immunity test－ Display of measured results－ Report generation

Feature－ Sophisticated user interface－ Measurement procedure that dramatically reduces measurement time－ Capable of exporting measurement data in CSV format－ Capable of saving standard values, factors, and measurement conditions to

files, enabling them to be set, edited, and created easily－ Support a wide range of hardware of various manufactures－ Various password function are provided for a range of password levels, from

the staff in charge of making measurement and to the system administrator

Immunity Test SoftwareOverviewTOYO IM5 series software, which performs automated immunity testing, has been developed to evaluate the immunity of electronic devices against electromagnetic interference. The IM5’s capability to automatically control the instruments required for immunity testing (e.g. a signal generator, power amplifier system, electric-field strength meter, power meter, and antenna mast) allows any users to conduct EMI measurements in an efficient and secure manner, as well as to output measurement data to a printer and to save such data on a hard disk drive. With an error detection option installed, the IM5 monitors the DUT being subjected to an immunity test and, if any limit setting is exceeded, detects it as an error. TOYO VI5 series software, which also is for automated immunity testing, has been developed specifically to test automobiles for their immunity against electromagnetic interference. As is the case with all other TOYO EMC/EMI software applications, the VI5 is constantly updated and upgraded to better serve customer needs, an example of which is the implementation of an error detection function utilizing CAN/LIN bus monitor and image recognition.

IM5/RS : Radiated immunity test software Immunity measurement result window

VI5/RS : Vehicle immunity test software Display of CAN measurement error detection

VI5/RS : Vehicle immunity test software Display of image-recognition error detection


Shielded room or radio anechoic chamber

Spectrum analyzer/ EMI test receiver Biconical antenna

[30 MHz-300 MHz]

Antenna mast

LISN

Absorbing clamp

Clamp travel gear

(Auxiliary clamp)

ISN

Radiated noise measurement setup

Terminal noise measurement setup

Noise power measurements setup

Preamplifier[1-8 GHz]

Preamplifier[max. 1 GHz]

Log periodic antenna[300 MHz-1 GHz]

(Biconilog antenna)[30 MHz-1 GHz]

Horn antenna[1 GHz-6 GHz]

HAP antenna[6-18 or 40 GHz]

EUT

EUT table

Turntable

Optical fiber cable

System controller

Clamp controller

Mast/ Table controller

Auto measurement software

RF cableGPIB cableOptical fiber cableUSB cable

RF selector

Measurement room Radio anechoic chamber

EMI Measurement System － CISPR-approved system －

EMI measurement system best suited to customer needs

OverviewThe electronics industry moves toward the digitalization and mobilization of equipment with higher density packaging, making the determination of noise source and EMC control more challenging.There are increasing demands to expand upper limited frequency, adhere to frequently-revised standards, and acquire and store data on more complex noise to the greatest extent possible.TOYO’s 30 years of technical expertise has trickled down to its automatic systems based on impressive records of supplying hundreds of systems to various businesses from public test laboratories through commercial EMC test houses.TOYO’s time-proven systems offer the user a wide choice of options, from full compliance fully-automatic measurement to preliminary simplified measurement.

Basic measurement functions－ Capable of acquiring spectrum and QP detector

measurement with a single click.－ Endowed with functions effective for manual

measurements.－ Capable of exporting data.

SoftwareEP7 Series (3D display with a detailed noise analysis function)－ EP7/RE type : Radiated noise weighting and measurement

software－ EP7/CE type : Terminal noise weighting and measurement

softwareEP5/EP9 Series (With a standard noise analysis function)－ EP5/RE type : Radiated noise measurement software－ EP5/RFP type : Noise power measurement software－ EP5/RSE type : Radiated spurious emission measurement

software－ EP9/CE type : Terminal noise measurement software

Applicable standards－ Consumer product standards :

CISPR, EN, FCC, VCCI

－ Wireless Application standards : TS51.010-1, TS34.121 (3GPP) Cellular phones (GSM, WCDMA) EN300 328, EN301 893 (ETSI)

－ Automotive standards : CISPR12, CISPR25, UN/ECE R10, SAE, JASO

CISPR-compliant EMI test receiver with an integrated preselector

N9038A MXE EMI receiverFrequency ： 3 Hz – 3.6/8.4/26.5/44 GHz

EMC Measurements



Spectrum analyzer/ EMI test receiver Biconical antenna

[30 MHz-300 MHz]

Antenna mast

LISN

Absorbing clamp

Clamp travel gear

(Auxiliary clamp)

ISN

Radiated noise measurement setup

Terminal noise measurement setup

Noise power measurements setup

Preamplifier[1-8 GHz]

Preamplifier[max. 1 GHz]

Log periodic antenna[300 MHz-1 GHz]

(Biconilog antenna)[30 MHz-1 GHz]

Horn antenna[1 GHz-6 GHz]

HAP antenna[6-18 or 40 GHz]

EUT

EUT table

Turntable

Optical fiber cable

System controller

Clamp controller

Mast/ Table controller

Auto measurement software

RF cableGPIB cableOptical fiber cableUSB cable

RF selector

Measurement room Radio anechoic chamber

EMI Measurement System

SpecificationModel

M9403A PXIe optical transmitter: 300 kHz to 26.5 GHz or 50 GHz

M9404A PXIe optical receiver: 300 kHz to 26.5 GHz or 50 GHz

M9405A PXIe amplifier: 300 kHz to 26.5 Gz or 50 GHz

M9406A PXIe optical to USB 2.0

M9407A PXIe optical to 4 port USB 2.0 hub

M9408A PXIe remote RF reflectometer

Pre-compliance spectrum analyzer X Series

N9030B PXA signal analyzerFrequency : 3 Hz – Max. 50 GHz

FCC standard (1-40 GHz)-compatible model

N9020B MXA signal analyzerFrequency : 10 Hz – Max. 26.5 GHz

CISPR standard (Min. 1 GHz)-compatible model

N9010B EXA signal analyzerFrequency : 10 Hz – Max. 44 GHz

M940X Series PXIe Optical Extenders

Keysight Technologies M940X Series PXIe Optical ExtendersThe M940X series PXIe optical extenders convert RF and microwave signals into optical signals and transmit them more than 1000 meters. Since optical fibers are superior to coaxial cables in transmission loss and noise resistance, the M940X optical extenders allow you to build a high-sensitivity radiated emission measurement system.


Overview TOYO’s G-CELL is a cubic cell upgraded from TEM CELL, enabling easy radiated EMI measurement and immunity test of EUTs in the transmission line installed on the floor. User-friendly G-CELL is favorable for immunity control and preliminary measurements before authentication tests in a radio anechoic room andopen site.

Feature－ Capable of easy EMI measurement with the

spectrumanalyzer. － Enables radiated immunity test assuring consistency.－ Large opening design allowing easy EUT installation.－ Customizable power/signal line filters.

Applications－ Radiant emission measurement－ Radiant immunity test

Specifications－ Frequency range : 10k-1GHz(2GHz)－ Max. input power : 150W(Type N connector)－ Dimensions : 70x70x70cm (protrusion excluded)－ Applicable EUT size : 40x40x40cm－ Shielding performance : Min. 70dB

Software－ EP5/ME : Simplified EMI measurement software－ IM5/RS : Radiated immunity test software

G-CELL

TEM-wave Large-bandwidth Transmission Line System G-CELLDesigned for EMI measurement and analysis and assessment of radiated immunity test

EMC Measurements

Frequency[MHz]


Electric field sensor

N5181A MXG signal generator(recommended)

RF power amplifier G-CELL

G-CELL 310N preamplifier N9010B EXA signal analyzer(recommended)

Standard componentsModel Equipment

G-CELL TEM-wave large-bandwidth transmission line system

EP5/ME Simplified EMI measurement software

N9010B EXA Signal analyzer (10 Hz – 3 GHz)

310N Preamplifier

50 Ω termination

Computer, a set of cables (RF, GPIB)


G-CELL TEM-wave large-bandwidth transmission line system

IM5/RS Radiated immunity test software

N5171B Signal generator (9 kHz – 3 GHz)

power amplifier


50 Ω termination


Connection diagram for radiated emission measurement

Connection diagram for radiated immunity test


GTEM CELL

OverviewOur GTEM CELL is apt for EMC applications, antenna/ magnetic field probe and cellular phone tests in tandem with an upgrade frequency band from TEM (Transverse Electro Magnetic) CELL. The extended frequency band also lends itself to part sorting and measurements.

Features－ Stable shielded environment for EMI measurement

and immunity test－ Compliant with the IEC/EN61000-4-20 and FCC ANSI

C63.4 standards.－ Designed for broad spectrum (DC-20 GHz).－ Offers a rich lode of GTEM CELL models (septum

height ranging from 250 mm to 2000 mm)－ Outstanding VSWR over the entire frequency band－ Customizable power/signal line filters

Software－ EP5/ME type: Simplified EMI measurement software－ IM5/RS type: Radiated immunity test software

Applications－ Radiant emission measurement－ Radiant immunity test

Specifications

GTEM250 GTEM500 GTEM750 GTEM1000

Septum height (mm) 250 500 750 1000

Dimensions (m) 1.25 x 0.65 x 0.45 2.95 x 1.48 x 1.61 3.95 x 2.02 x 1.95 4.95 x 2.54 x 2.30

Dimensions of test product (m) 0.15 x 0.15 x 0.08 0.30 x 0.30 x 0.15 0.45 x 0.45 x 0.22 0.60 x 0.60 x 0.30

Max. input power (w) 50 W 100 W 200 W 1000 W

GTEM1250 GTEM1500 GTEM1750 GTEM2000

Septum height (mm) 1250 1500 1750 2000

Dimensions (m) 5.95 x 3.06 x 2.52 6.95 x 3.58 x 2.55 7.95 x 4.10 x 2.90 8.95 x 4.62 x 3.24

Dimensions of test product (m) 0.70 x 0.70 x 0.38 0.85 x 0.85 x 0.45 1.00 x 1.00 x 0.50 1.15 x 1.15 x 0.60

Max. input power (w) 1000 W 1000 W 1000 W 1000 W

GTEM CELLExcellent for analysis and assessment of EMI and immunity control

EMC Measurements


GTEM CELL


N5171B EXG signal generator(recommended)

RF power amplifier

GTEM CELL

310N preamplifier N9010B EXA signal analyzer(recommended)

Connection diagram for radiated emission measurement


GTEM CELL

EP5/ME Simplified EMI measurement software

N9010B EXA Signal analyzer (10 Hz – 26.5 GHz)

310N Preamplifier


Connection diagram for radiated immunity test


GTEM CELL

IM5/RS Radiated immunity test software

N5171B Signal generator (9 kHz – 6 GHz)

Power amplifier




Inside of FC-1000

EP6/FC Faraday gauge measurement software

FC-1000 system 310N preamplifier

RF RF GPIB

N9010B EXA signal analyzer PC

Easy noise suppression achieved in common mode noise measurement

OverviewTOYO’s savvy has made it possible to attain the accuracy of common mode noise measurement closest to that of spurious noise measurement in a radio anechoic room, using the Workbench Faraday Cage (IEC61967-5), an EMC performance assessment method of a semiconductor. Sporting reproducibility superior to conventional measurements in a radio anechoic room, our TS1000 is effective in EMI control during the product development stage.

Features－ Unsusceptible to radiated noise, delivering high data

reproducibility.－ Capable of measurements in a low-noise floor level.－ Speedy, fuss-free measurements as compared with noise

measurements in a radio anechoic room－ Allows common mode noise measurements in any office

environments.

Applications－ Radiant emission measurement

FC-1000 Main Specifications－ Mmeasuring frequency range: 30-1000MHz－ Max. outer dimensions: 950mm (L) x 780mm (w) x 220mm (H)－ Weight: 29.2kg－ I/O voltage range : -48~48VDC－ I/O current range : 0-2ADC－ Number of power input terminals : 6 systems－ Number of signal I/O terminals : 3 systems*No AC input and output enabled


FC-1000 Faraday cage

EP6/FC Faraday cage measurement software

N9010B EXA Signal analyzer (9 k-3.6 GHz)

310N Preamplifier


Connection diagram

Common Mode Noise MeasurementSystem TS1000

EMC Measurements


Oscilloscope for Immunity PulseWaveform Observation

TESEQ Model NSG437Discharge voltage 200 V-30 kV (IEC61000-4-2-compatible)

Software-controlled instantaneous waveform check

OverviewThe IEC-defined immunity standards provides for a pulse shape check in calibration and daily inspection. ESD waveforms which have the quick leading edge of sporadic pulse especially require the utilization of a wide band oscilloscope.

Features－ Designed to meet a sample speed and frequency

band－ Software-controlled automatic waveform

measurement and report generation

Applications－ Waveform calibration and daily inspection


Infiniium S SeriesDSO/MSO9000A Series

Oscilloscope

MD103 ESD waveform observation target (IEC61000-4-2)

CAS3025 EFT/ burst observation attenuator (IEC61000-4-4)

MD200 Surge waveform observation probe (IEC61000-4-5)

MD300 Surge waveform observation probe (IEC61000-4-5)

Recommended oscilloscope ESD oscilloscope waveform

DSO/MSO9000A Seriesoscilloscope

Infiniium S Seriesoscilloscope

EMC Measurements



Antenna mast

150 W/50 WConversion

adapter

Radiated immunity test setup

Conducted immunity test setup

Log periodic antenna [80MHz-1GHz]

(Horn antenna)[1GHz-2.5GHz]

(Horn antenna)[2.5GHz-6GHz]

RF amplifier[150kHz-230MHz]

Stacked log periodic antenna[1GHz-6GHz]

EUT

EUT

Termination

To monitoring spectrum analyzer

EUT table

Attenuator

To power supply CDN


Sensor mast

Optical fiber cableRF cableGPIB cableOptical fiber cableUSB cable

RF selector

(Selector controller)

(Signal generator)

Spectrum analyzer

System controller

Directional coupler

Radiated immunity automatic test softwareConducted immunity automatic test software

Optical GPIB converter

Optical USB converter

Directional coupler

Measuring instrument rackSignal generator

Power sensorF1

F1R1

F2R2

F3R3

R1R2R23

F2F3

Power meter

Power meter

Measurementroom Radio anechoic chamber

Recommended signal generator

N5171B ・N5173BMXG signal generator

Immunity test system best suited to customer needs

OverviewTOYO offers a valuable test system to assess electromagnetic interference in electronic equipment. Installed with Radiated Immunity Test Software IM5, our immunity test system automatically controls the signal generator, power amplifier system, electric field sensor, power meter and antenna mast. It also supports outputting and saving of test results.

Basic measurement functions－ Electric field uniformity measurement－ System linearity testing－ Electric field reference measurement/ Electric field

check－ Immunity test－ Display of measured results－ Report generation

SoftwareM5/RS type: Radiated immunity test softwareIM5/CS type: Conducted immunity test softwareVI5/RS type: Vehicle radiated immunity test software

Applicable standardsConsumer product standards－ IEC61000-4-3,6－ CISPR24－ EN

Automotive standards－ UN/ECE R10－ ISO11452-1/2－ SAE－ JASO－ GM/Ford standards (radar pulse)－ Standards in other auto manufacturers

MIL standards

Standards for medical devices

Radiated/Conducted Immunity Test System – Compliant with international and company standards –

EMC Measurements



Antenna mast

150 W/50 WConversion

adapter

Radiated immunity test setup

Conducted immunity test setup

Log periodic antenna [80MHz-1GHz]

(Horn antenna)[1GHz-2.5GHz]

(Horn antenna)[2.5GHz-6GHz]

RF amplifier[150kHz-230MHz]

Stacked log periodic antenna[1GHz-6GHz]

EUT

EUT

Termination

To monitoring spectrum analyzer

EUT table

Attenuator

To power supply CDN


Sensor mast

Optical fiber cableRF cableGPIB cableOptical fiber cableUSB cable

RF selector

(Selector controller)

(Signal generator)

Spectrum analyzer

System controller

Directional coupler

Radiated immunity automatic test softwareConducted immunity automatic test software

Optical GPIB converter

Optical USB converter

Directional coupler

Measuring instrument rackSignal generator

Power sensorF1

F1R1

F2R2

F3R3

R1R2R23

F2F3

Power meter

Power meter

Measurementroom Radio anechoic chamber

Immunity Test System

Recommended power meters

P Series Power MeterN1912A

EPM Series Power MeterN1914A

TA0122-10K

RF power amplifier TA series(10kW/5kW/2.5kW)RF power amplifier TA series is a solid state (semiconductor device)-laden high power amplifier, delivering output linearity and stability as fundamental performance. TA series is designed for high reliability and quality.

Features‒ 10 kW of high power output

(7 kW@1 dB comp.)‒ Easy maintainability through RF

unit replacement‒ Equipped with the internal data

storage function which is capable of easy cause analysis of a malfunction.

SpecificationsModel Frequency Output

TA0122-10K 10 k-225 MHz 10 kW

TA0122-5K 10 k-225 MHz 5 kW

TA0122-2.5K 10 k-225 MHz 2.5 kW


OutlineJSE-KEC and JSE-KEC6G systems are developed by KEC Electronic Industry Development Center to measure the permeation loss of sheet and film shielding materials in an easy way.

Specifications

JSE-KEC JSE-KEC6G

Compliant standard/method

KEC Method ASTM D 4935-10 (2010 edition)

Frequency range 100 kHz - 1 GHz 1 GHz - 6 GHz

Dynamic range 80 dB (nominal, depends on input level and receiver's measurement limitations)

Sample size approx. 110X100 mm - 6 mm thick or less approx. 30～50 mm square - 1 mm thick or less

Outer dimensions and weight

W350×D350×H500（excluding protrusions)approx. 25 kg

W300×D350×H350（excluding protrusions）approx. 20 kg

Accessories Blind plate x 1, Thickness calibration plate x 3 Blind plate x 1

Outstanding features－ No need for complicated material processing－ All it takes is to insert a sample into a jig－ Wide frequency coverage

100kHz~1GHz, 1GHz~6GHz－ Dedicated software enables automatic shielding

effect measurement－ Offered as a system with a network analyzer and

measurement software

Shielding effect measurement software－ SEMS

RF Cable

RF Cable

Network analyzer(Keysight Technologies)

LAN Contorl

SEMSShielding effect measuremetn software

JSE-KEC6G

System configuration example with JSE-KEC6G [S21 permeation loss measurement]

S21 Shielding effect measurement

These systems enable you to evaluate shielding materials in a relativemanner in a short time and with no sweat!

EMC Measurements

For Shielding Material Permeation Loss MeasurementJSE-KEC System (for shielding effect measurement by KEC method)

JSE-KEC6G System (for GHz-band shielding effect measurement)


SEMS Measurement Software

Allows you to select a jig and initialize the network analyzer.

Displays measurement results as 《Shielding effect[dB]》 on an Excel spreadsheet for review at a glance

Superimposes measurement results on a graph and outputs lists for individual measurements on separate sheets.

Standard configurationModel Description

JSE-KEC Shielding effect measurement systemJSE-KEC6G

EP9/SH Measurement software

3 dB attenuator, Coaxial cable

E5071C Network analyzer

①Select a system　Set meas. condition

②Execute THRU cal.

③Measure shielding effect

Re-measure the same EUT

Normal sequence

Optional sequence (skip or repeat some steps)

You can return to "① Set meas. condition" from anywhere in the sequence.

Connect the EUT Remove the EUT

Re-do calibration

Change the system

Measureanother

EUT

Skipcalibration

Basic operation sequence

JSE-KEC KEC method shielding effect measurement system

(for electric filed)* JSE-KEC comes standards with a jig for the

electromagnetic field.

Measurement software setting screenfor selecting a jig and initializing the network analyzer

Excel data output example Measurement results are output as 《shielding effect [dB]》.

*An English version of SEMS software is now under development. Measurement graph example

0

–10

–20

–30

–40

–50

–60

–70

–80

–90

Copper mesh(1mm)

Copper foil（75µm）

Shie

ldin

g ef

fect

[dB]

Frequency [GHz］1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6


M E M O


M E M O


© Keysight Technologies, 2017Published in Japan, February 21, 20175990-9819ENJP0000-08cSwww.keysight.co.jp

This information is subject to change without notice.

TOYO Corporation1-6, Yaesu 1-chome, Chuo-ku, Tokyo 103-8284, JapanTEL +81-(0)3-3279-0771FAX +81-(0)3-5205-2030Contact : https://www.toyo.co.jp/contacts/URL : http://www.toyo.co.jp

TOYOTech LLC42840 Christy Street, Ste.209Fremont, CA 94538TEL +1 510.438.9548URL : http://www.toyotechus.com

TOYO Corporation ChinaRoom 310 Enterprise Square, No.228 Mei Yuan Road, Jing’an District, Shanghai 200070, P.R. ChinaTEL +86 021-6380-9633URL : http://www.toyochina.com.cn

Keysight & Solutions PartnersExtending our solutions to meet your needs

EvolvingOur unique combination of hardware, software, support, and people can helpyou reach your next breakthrough. We are unlocking the future of technology.

From Hewlett-Packard to Agilent to Keysight

* Bluetooth and the Bluetooth logos are trademarks owned by Bluetooth SIG, Inc., U.S.A. and licensed to Keysight Technologies, Inc.

* WiMAX, Mobile WiMAX, WiMAX Forum, the WiMAX Forum logo, WiMAX Forum Certified and the WiMAX Forum Certified logo are US trademarks of the WiMAX Forum.

* cdma2000 is a US registered certification mark of the Telecommunications Industry Association.

For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at:www.keysight.com/find/contactus

Americas

Canada (877) 894 4414

Brazil 55 11 3351 7010

Mexico 001 800 254 2440

United States (800) 829 4444

Asia Pacific

Australia 1 800 629 485

China 800 810 0189

Hong Kong 800 938 693

India 1 800 11 2626

Japan 0120 (421) 345

Korea 080 769 0800

Malaysia 1 800 888 848

Singapore 1 800 375 8100

Taiwan 0800 047 866

Other AP Countries (65) 6375 8100

Europe & Middle East

Austria 0800 001122

Belgium 0800 58580

Finland 0800 523252

France 0805 980333

Germany 0800 6270999

Ireland 1800 832700

Israel 1 809 343051

Italy 800 599100

Luxembourg +32 800 58580

Netherlands 0800 0233200

Russia 8800 5009286

Spain 800 000154

Sweden 0200 882255

Switzerland 0800 805353

Opt. 1 (DE)

Opt. 2 (FR)

Opt. 3 (IT)

United Kingdom 0800 0260637

For other unlisted countries:

www.keysight.com/find/contactus(BP-06-08-16)


Documents

Solutions Partner Catalog Keysight Technologies & TOYO ... … · enrich technical training for employees. In recent years, ... Cellular phones (GSM, WCDMA), ... Spectrum analyzer