Upload
others
View
5
Download
1
Embed Size (px)
Citation preview
FEBRUARY 2020
SuperFly® DatalinkHarsh-Environmet Ultraminiature Connnector for High-Speed Applications Including 10 Gigabit Ethernet, HDMI, SuperSpeed USB, DisplayPort, and SATA
SERIES 882
INTERCONNECT SOLUTIONS
MISSION-CRITICAL
v
1© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
Refe
renc
e
Glenair, Inc.1211 Air WayGlendale, CA [email protected]
The High-Speed Ultraminiature Connector for Harsh Environments
10G ETHERNET AND SUPERSPEED USB TECHNOLOGY
SuperFly Datalink White
SuperFly Datalink Blue
SuperFly Datalink Red
10G Ethernet SuperSpeed USB HDMI, DisplayPort, and SATA
High speed, harsh environment SuperFly® Datalink connectors—optimized for 10Gb Ethernet and SuperSpeed USB protocols—save significant size
and weight. Suitable for aircraft avionics, weapons systems, satellites, radars, communications equipment and other aerospace/defense gear, Octaxial SuperFly® Datalink connectors bring superior EMC shielding, environmental protection, and signal integrity to mission-critical mil-aero applications.
Quick -disconnect “push-pull” versions are ideal for tactical gear. Threaded-coupling versions are intended for aircraft and space-grade applications where secure mating is a requirement.
pOn the cover: Curiosity rover “selfie” at Mars’ Mount Sharp. NASA/JPL-Caltech/MSSS photo.
Introduction
SuperFly Datalink White White dielectric indicates 100 ohm differential impedance for Ethernet protocols. Ideal for 1000BASE-T and 10GBASE-T applications in hostile environments with temperature extremes, high vibration, electromagnetic interference as well as moisture exposure. Compatible with SAE AS6070 flight-grade Ethernet cable. Accepts 24 AWG or 26 AWG. Available with secure threaded coupling or QDC mating. See Page 2 for SuperFly Datalink White (10Gb Ethernet) Selection Guide
SuperFly Datalink BlueBlue dielectric indicates 90 ohm differential impedance for SuperSpeed USB. Ideal for USB 3.0 applications in hostile environments with temperature extremes, vibration, electromagnetic interference, as well as moisture exposure. Designed for use with high performance aerospace grade USB 3.0 cable. Available with threaded coupling or push-pull mating.See Page 3 for SuperFly Datalink Blue (SuperSpeed USB 3.0) Selection Guide
SuperFly Datalink RedRed dielectric indicates 100 ohm differential impedance for HDMI 2.0, DisplayPort 1.2, and SATA. Ideal for video applications in hostile environments with temperature extremes, vibration, electromagnetic interference, as well as moisture exposure. Designed for use with high performance aerospace grade cable. Available with threaded coupling or push-pull mating.See Page 4 for SuperFly Datalink Red (HDMI, DisplayPort, and SATA) Selection Guide
SuperFly Datalink connectors are ultra-small eight-contact quick-disconnect (QDC) or threaded-
coupling connectors for 10Gb Ethernet, HDMI, DisplayPort, SATA or USB 3.0. Designed to withstand harsh aerospace environments, the SuperFly Datalink combines miniaturized design with shielded electrical performance and sealed environmental protection.
The SuperFly Datalink is the aerospace industry’s smallest connector solution supporting10Gb Ethernet, SuperSpeed USB, HDMI,
DisplayPort and SATA. Compatible with flight-grade shielded data cable, these shielded-contact connectors are available as unassembled kits or factory-terminated cordsets. Panel jacks feature fully-sealed printed circuit terminals for vertical or right-angle board mounting.
Series 882 Connectors and Turnkey Cordsets
Selection Guides ......................... 2–3Product Features .......................... 4Specifications .................................5Signal Integrity Data .................. 6–7Protective Covers ..........................41Part Number Index .......................41
SUPERFLYDATALINK
Quick Disconnect Threaded Coupling Straight PC Tails Right Angle PC Tails
v
32 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882Re
fere
nce
Refe
renc
e
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
Selection Guide: SuperFly Datalink Blue for USB 3.0Selection Guide: SuperFly Datalink White for Ethernet
Quick Disconnect for USB 3.0 Threaded Coupling for USB 3.0882-009 Cable Plug .......................................30Integral backshell and cable grommet. Supplied as unassembled kit for termination to USB 3.0 cable. Mates with 882-010 and 882-013.
882-011 Cable Plug .......................................38Integral backshell and cable grommet. Supplied as unassembled kit for termination to USB 3.0 cable. Mates with 882-012, -014 and -015.
882-010 Cable Receptacle ..........................31Integral backshell and cable grommet. Supplied as unassembled kit for termination to USB 3.0 cable. Mates to 882-009, 882-018, & 882-033.
882-014 Cable Receptacle ..........................39Integral backshell and cable grommet. Supplied as unassembled kit for termination to USB 3.0 cable. Mates with 882-011.
882-018 Panel Plug, Strt PCB ....................32Rear panel jam-nut mount receptacle has O-ring seals and epoxy potting for watertight sealing. Mates with 882-010, 882-013, & 882-016.
882-012 Panel Receptacle, PCB ................40Rear panel mount, jam-nut receptacle has O-ring seals and epoxy potting for watertight sealing. Mates with 882-011.
882-013 Panel Receptacle, Strt PCB .......33Rear panel mount, jam-nut receptacle has O-ring seals and epoxy potting for watertight sealing. Mates with 882-009 & 882-018.
882-015 Panel Receptacle, 90° PCB ........42Rear panel mount, jam-nut receptacle has O-ring seals and epoxy potting for watertight sealing. Mates with 882-011.
882-033 Panel Plug, 90° PCB .....................41Rear panel mount, jam-nut receptacle has O-ring seals and epoxy potting for watertight sealing. Mates with 882-010, 882-013 & 882-016
8572-0010 Cordset, Single-Ended .............43Pre-wired with aerospace-grade or commercial-grade USB 3.0 cable. Cable has plug or receptacle on one end, other end is unterminated.
882-016 Panel Receptacle, 90° PCB ........34Rear panel mount, jam-nut receptacle has O-ring seals and epoxy potting for watertight sealing. Mates with 882-009 and 882-018.
8572-0011 Cordset, Double-Ended ........44Pre-wired with aerospace-grade or commercial-grade USB 3.0 cable. Cable has plug on one end and receptacle on the other end.
8572-0006 Cordset, Single-Ended .............35Pre-wired with aerospace-grade or commercial-grade USB 3.0 cable. Cable has plug or receptacle on one end, other end is unterminated.
8572-0013 Patchcord, USB ...........................45Pre-wired with commercial-grade USB 3.0 cable. Cable has standard USB connector on one end, other end is SuperFly Datalink.
8572-0007 Cordset, Double-Ended ........36Pre-wired with aerospace-grade or commercial-grade USB 3.0 cable. Cable has plug on one end and receptacle on the other end.
8572-0008 Patchcord, USB ...........................37Pre-wired with commercial-grade USB 3.0 cable. Cable has standard USB connector on one end, other end is SuperFly Datalink.
Quick Disconnect for 10Gb Ethernet Threaded Coupling for 10Gb Ethernet882-001 Cable Plug ........................................10Integral backshell and cable grommet. Supplied as unassembled kit for termination to Cat 6A Ethernet cable. Mates to 882-002 & 882-005.
882-003 Cable Plug .......................................20Integral backshell and cable grommet. Supplied as unassembled kit for termination to Cat 6A Ethernet cable. Mates to 882-004, -006, and -007.
882-002 Cable Receptacle ...........................11Integral backshell and cable grommet. Supplied as unassembled kit for termination to Cat 6A Ethernet cable. Mates to 882-001.
882-006 Cable Receptacle ..........................21Integral backshell and cable grommet. Supplied as unassembled kit for termination to Cat 6A Ethernet cable. Mates with 882-003.
882-017 Panel Plug, Strt PCB .....................12Rear panel mount, jam-nut plug has O-ring seals and epoxy potting for watertight sealing. Mates with 882-002, 882-005, and 882-008.
882-004 Panel Receptacle, PCB ................22Rear panel mount, jam-nut receptacle has O-ring seals and epoxy potting for watertight sealing. Mates with 882-003.
882-005 Panel Receptacle, Strt PCB ........13Rear panel mount, jam-nut receptacle has O-ring seals and epoxy potting for watertight sealing. Mates with 882-001, 882-017, and 882-032.
882-007 Panel Receptacle, 90° PCB ........23Rear panel mount, jam-nut receptacle has O-ring seals and epoxy potting for watertight sealing. Mates with 882-003.
882-032 Panel Plug, 90° PCB ......................14Rear panel mount, jam-nut receptacle has O-ring seals and epoxy potting for watertight sealing. Mates with 882-002, 882-005 and 882-008.
8571-0012 Cordset, Single-Ended .............24Pre-wired with aerospace-grade CAT 6A Ethernet cable. Cable has plug or receptacle on one end, other end is unterminated.
882-008 Panel Receptacle, 90° PCB .........15Rear panel mount, jam-nut receptacle has O-ring seals and epoxy potting for watertight sealing. Mates with 882-001.
8571-0013 Cordset, Double-Ended ........25Pre-wired with aerospace-grade CAT 6A Ethernet cable. Cable has plug on one end and receptacle on the other end.
8571-0007 Cordset, Single-Ended ..............16Pre-wired with aerospace-grade CAT 6A Ethernet cable. Cable has plug or receptacle on one end, other end is unterminated.
8571-0015 RJ45 Patchcord, Ground ..........26Pre-wired with commercial-grade CAT 6A Ethernet cable. Cable has RJ45 plug on one end and plug or receptacle on the other end.
8571-0008 Cordset, Double-Ended .........17Pre-wired with aerospace-grade CAT 6A Ethernet cable. Cable has plug on one end and receptacle on the other end.
8571-0016 RJ45 Patchcord, Flight .............27Pre-wired with flight-grade CAT 6A Ethernet cable. Cable has RJ45 plug on one end and plug or receptacle on the other end.
8571-0009 RJ45 Patchcord, Ground ...........18Pre-wired with commercial-grade CAT 6A Ethernet cable. Cable has RJ45 plug on one end and plug or receptacle on the other end.
8571-0010 RJ45 Patchcord, Flight ..............19Pre-wired with flight-grade CAT 6A Ethernet cable. Cable has RJ45 plug on one end and plug or receptacle on the other end.
Flight-Grade 100 Ohm Ethernet Cable 963-033 S/FTP Cable .....................................2824 and 26 AWG. S/FTP construction, foil shielded data pairs. High performance shielded cable is AS6070/5 and /6 approved.
963-003 and 963-037 S/UTP Cable .........29 24 and 26 AWG. S/UTP construction with fluoropolymer spline. Meets FAA flammability requirements.
90 Ohm USB 3.0 Cable 963-110 Flight-Grade Cable ......................46High temperature, high performance, fluoropolymer aterials, shielded. High speed pairs have braid shields. -65° to +200°C.
963-118 Commercial-Grade Cable .........47Black PVC jacket, foamed PE wire insulation. High speed pairs have foil shields. 0 to +80°C.
z Ultra-small size z Shielded Octaxial
contacts z Up to 5 Gbps z 10Gb Ethernet, SATA
and SuperSpeed USB z PCB or cable
termination z Threaded or quick-
disconnect z Environmentally
protected z Aerospace-grade
performance
The High-Speed Ultraminiature Connector for Harsh Environments
Cable Sealing Grommet
Backshell
882-001Plug Connector
882-002Receptacle Connector
O-ring
Retainer Clip
Cable Shield Bushing
Latching EMI Spring O-ring Interface Seal
Spline(El Ochito® White Only)
Inner Insulator
Pin Contacts
Outer Insulator
Coupling Nut and Plug Shell Assembly
Push-Pull Quick-Disconnect
Threaded Coupling Cable Connector
Panel Mount Connector
Push-pull SuperFly Datalink receptacle connectors feature a canted coil spring for secure mating and excellent EMI protection. A
fluorosilicone O-ring provides watertight sealing when mated.
Cable connectors feature gold-plated crimp contacts, precision insulators, integral backshell, sealing grommet and machined
shells. Cable connectors are available as unassembled kits or ready-to-use factory-terminated cordsets.
Panel mount SuperFly Datalink receptacles feature
straight or right angle printed circuit terminals. SuperFly Datalink jacks are epoxy-sealed and are compatible with conformal coatings.
54 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882Re
fere
nce
Refe
renc
e
Quick Disconnect for HDMI, SATA and DP Threaded Coupling for SATA 882-019 HDMI & DP Cable Plug ................ 47Choose integral banding porch backshell. Supplied as unassembled kit. Mates with 882-020 and 882-022
882-025 Cable Plug ....................................... 58Choose integral band porch or cable grommet backshell. Kit supplied unassembled. Mates with 882-026, 882-028 and 882-029.
882-020 HDMI & DP Cable Recept. .......... 48Choose integral banding porch backshell. Supplied as unassembled kit. Mates with 882-019 and 882-021
882-026 Cable Receptacle .......................... 59Choose integral band porch or cable grommet backshell. Kit supplied unassembled. Mates with 882-025.
882-021 PCB HDMI & DP Plug .................... 49Straight PCB, rear panel mount, jam-nut receptacle. O-ring seals and epoxy potting for watertight sealing. Mates to 882-020 & 882-022.
882-028 Straight PCB Receptacle ............ 60100 Ohm, rear panel mount, jam-nut receptacle. O-ring seals and epoxy potting for watertight sealing. Mates with 882-025.
882-022 PCB HDMI & DP Receptacle ...... 50Straight PCB, Rear panel mount, jam-nut receptacle. O-ring seals and epoxy potting for watertight sealing. Mates to 882-019 & 882-021
882-029 90° PCB Receptacle ...................... 61100 Ohm, 90° rear panel mount, jam-nut receptacle. O-ring seals and epoxy potting for watertight sealing. Mates with 882-025.
882-023 SATA Plug .......................................... 51Choose Integral band platform or cable grommet backshell. Supplied as unassembled kit. Mates with 882-024, 882-027, 882-030
8573-0027 ........................................................ 62 Pre-wired single-ended cordset with cable grommet backshell. 4 aerospace grade cable options available.
882-024 SATA Receptacle ............................ 52Choose Integral band platform or cable grommet backshell. Supplied as unassembled kit. Mates with 882-023, 882-031, 882-034
8573-0028 ........................................................ 63 Pre-wired plug-to-receptacle cordset with cable grommet backshell. 4 aerospace grade cable options available.
882-031 SATA PCB Plug ................................ 53100 Ohm, rear panel mount, jam-nut receptacle. O-ring seals and epoxy potting for watertight sealing. Mates with 882-024, 882-027, 882-030
882-027 SATA PCB Receptacle ................... 54PCB, rear panel mount, jam-nut receptacle. O-ring seals and epoxy potting for watertight sealing. Mates with 882-023, 882-031, & 882-034
882-030 SATA PCB 90° Receptacle ........... 5590° rear panel mount, jam-nut receptacle. O-ring seals and epoxy potting for watertight sealing. Mates with 882-023, 882-031& 882-034
882-034 SATA PCB 90° Plug ........................ 5690° rear panel mount, jam-nut plug. O-ring seals and epoxy potting for watertight sealing. Mates with 882-023, 882-031& 882-034
8573-0025 High-Speed Cordset .............. 57 Pre-wired single-ended cordset
8573-0026 High-Speed Cordset ............... 58 Pre-wired single-ended cordset.
100 Ohm, HDMI, DP and SATA Cables963-120 S/FTP HDMI and DP Cable .........60Aerospace grade 26 AWG, S/FTP construction with foil shielded data pairs. High performance cable offers three jacket material options.
963-127 S/FTP HDMI and DP Cable .........6026 AWG, S/FTP construction, foil shielded data pairs and overall 36 AWG tin/copper. Jacket available in three material options.
963-122 S/FTP High-Speed Cable ............614 data pair 26 AWG, S/FTP construction, foil shielded data pairs and overall 40 AWG silver plated copper braid. Three jacket material options.
963-033 S/FTP High-Speed Cable ............6126 AWG, S/FTP construction, foil shielded data pairs and overall 40 AWG silver plated copper braid. Three jacket material options.963-043 S/FTP SATA Cable ..........................6326 AWG, 2 pair S/FTP construction
Selection Guide: SuperFly Datalink Red for HDMI, DisplayPort & SATA El Ochito White, Blue and Red Ethernet, USB, and SATA Product Features
Product Features
z Ultra-small size z Shielded Octaxial
contacts z Up to 5 Gbps z PCB or cable
termination z Threaded or quick-
disconnect z Environmentally
protected z Aerospace-grade
performance
The High-Speed Ultraminiature Connector for Harsh Environments
Banding PlatformBackshell
882-019Plug Connector
882-020Receptacle Connector
El Ochito® High-Speed Contact
Latching EMI Spring O-ring Interface Seal
18 - #24 AWGSocket Contacts
Outer Insulator
Plug Shell Assembly
Fluorosilicone O-ringCoil Spring
Push-Pull HDMI and DisplayPort Cable Receptacle
Push-pull SuperFly Datalink receptacle connectors feature a canted coil spring for secure mating and excellent EMI protection while
fluorosilicone O-ring provides watertight sealing when mated.
Cable connectors feature gold-plated crimp contacts,
precision insulators, an integral backshell, and machined shells. Cable connectors are available as unassembled kits or ready-to-use factory-terminated cordsets.
Push-Pull Quick-Disconnect
76 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882Re
fere
nce
Refe
renc
e
DESCRIPTION MATERIAL FINISHContacts Copper alloy Gold 50 microinches minimum over nickel
Shell, coupling nut, backshell Aluminum alloy or stainless steel
Code M: Electroless nickel per ASTM B-733Code MT: Nickel-PTFE per SAE AMS2454Code ZR: Black zinc-nickel per ASTM B841Code Z2: Gold per MIL-G-45204Code ZMT: Nickel-PTFE per SAE AMS2454 over SST material
Insulators, PCB tray High-grade rigid dielectric NoneGrommet Fluorosilicone blend elastomer NoneO-rings Fluorosilicone blend elastomer None Latching EMI spring Stainless steel GoldBushing, retainer Copper alloy Electroless nickelSpline, SuperFly Datalink White Copper alloy Electroless nickelSpline, SuperFly Datalink Blue Polyimide NonePotting compound for 90° PCB Epoxy
SuperFly Datalink Standard Materials
SuperFly Datalink Performance SpecificationsDESCRIPTION REQUIREMENT PROCEDURE
Operating temperature SuperFly Datalink White -65° to +175°CSuperFly Datalink Blue and Red -65° to +125°C
Current rating 1.5 Amps
Dielectric Withstanding Voltage (sea level) 500 Vrms EIA-364-20
Insulation resistance 5000 MΩ minimum EIA-364-21
Contact resistance, 25°C 55 millivolt maximum EIA-364-06, 1.0 A test current, #24 AWG wire
Shell-to-shell resistance 2.0 millivolt maximum EIA-364-83
Shielding effectiveness
Frequency Attenuation dB100 751000 503000 446000 3810000 35
EIA-364-66
Ingress protection IP67 rating IEC-60529
Vibration, sineNo discontinuity of greater than 1 microseconds, no cracking, breaking or loosening of parts, plug shall not become disengaged from receptacle.
EIA-364-28 Test Condition IV
Vibration, randomNo discontinuity of greater than 1 microseconds, no cracking, breaking or loosening of parts, plug shall not become disengaged from receptacle.
364-28 Test Condition V Letter I
Mechanical shockNo discontinuity of greater than 1 microsecond, no cracking, breaking or loosening of parts, plug shall not become disengaged from receptacle.
EIA-364-27 Condition D
Temperature cycling
No mechanical damage or loosening of parts. Following test, connector shall meet contact resistance, DWV, insulation resistance and shell-to-shell resistance requirements
EIA-364-32 Test Condition IV-65°C, +150°C .
Humidity No deterioration which will adversely affect the connector. EIA-364-31
Durability 500 mating cycles
SpecificationsEl Ochito Red HDMI and DisplayPort Product Features
98 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882Re
fere
nce
Refe
renc
e
Cable ID: 591A_591B_788A_788B Test Summary: PASSDate / Time: 08/20/2015 11:44:01 AM Operator: KLW Model: DSX-5000Headroom 1.9 dB (NEXT 36-45) Software Version: V3.0 Build 6 Main S/N: 2766352Test Limit: TIA Cat 6A Channel Limits Version: V3.0 Remote S/N: 2766289Cable Type: Cat 6A U/UTP NVP: 68.2% Main Adapter: DSX-CHA004Calibration Date: 08/14/2014 Remote Adapter: DSX-CHA004
Project: DEFAULT Ochito Cat 6A Tests.flw
LinkWare™ PC Version 9.3
Length (ft), Limit 328 [Pair 36] 207Prop. Delay (ns), Limit 555 [Pair 12] 310Delay Skew (ns), Limit 50 [Pair 12] 2Resistance (ohms) [Pair 78] 19.1
Insertion Loss Margin (dB) [Pair 45] 6.4Frequency (MHz) [Pair 45] 500.0Limit (dB) [Pair 45] 49.3
Worst Case Margin Worst Case ValuePASS MAIN SR MAIN SRWorst Pair 36-45 12-36 45-78 45-78NEXT (dB) 1.9 2.6 9.3 7.6Freq. (MHz) 4.9 23.9 494.0 498.0Limit (dB) 61.7 50.4 26.2 26.1Worst Pair 45 36 45 45PS NEXT (dB) 2.6 2.7 8.3 8.2Freq. (MHz) 5.0 23.6 494.0 498.0Limit (dB) 59.0 47.8 23.4 23.3
PASS MAIN SR MAIN SRWorst Pair 12-78 78-12 36-45 36-45ACR-F (dB) 2.3 2.3 7.1 5.8Freq. (MHz) 1.0 1.0 466.0 473.0Limit (dB) 63.3 63.3 9.9 9.8Worst Pair 12 12 45 45PS ACR-F (dB) 3.6 3.5 8.9 7.8Freq. (MHz) 1.0 1.0 466.0 476.0Limit (dB) 60.3 60.3 6.9 6.7
N/A MAIN SR MAIN SRWorst Pair 36-45 12-36 12-45 45-78ACR-N (dB) 2.0 3.4 16.0 16.3Freq. (MHz) 4.9 23.6 495.0 498.0Limit (dB) 57.1 40.5 -22.8 -23.1Worst Pair 45 36 45 45PS ACR-N (dB) 2.6 3.2 15.3 14.7Freq. (MHz) 4.9 8.0 500.0 498.0Limit (dB) 54.6 49.8 -26.1 -25.9
PASS MAIN SR MAIN SRWorst Pair 78 12 45 78RL (dB) 0.6* 1.0* 11.5 11.0Freq. (MHz) 2.3 2.4 387.0 434.0Limit (dB) 19.0 19.0 6.1 6.0
Compliant Network Standards:10BASE-T 100BASE-TX 100BASE-T41000BASE-T 10GBASE-T ATM-25ATM-51 ATM-155 100VG-AnyLanTR-4 TR-16 Active TR-16 Passive
207 ft
Wire Map (T568A)PASS
Insertion Loss (dB)
MHz
0
10
20
30
40
50
60
0 250 500
NEXT (dB)
MHz
0
20
40
60
80
100
0 250 500
NEXT @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-F (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-F @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-N (dB)
MHz
-40
0
40
80
0 250 500
ACR-N @ Remote (dB)
MHz
-40
0
40
80
0 250 500
RL (dB)
MHz
0
20
40
60
80
100
0 250 500
RL @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
* Measurement is within the accuracy limits of the instrument.
Cable ID: 591A_591B_788A_788B Test Summary: PASSDate / Time: 08/20/2015 11:44:01 AM Operator: KLW Model: DSX-5000Headroom 1.9 dB (NEXT 36-45) Software Version: V3.0 Build 6 Main S/N: 2766352Test Limit: TIA Cat 6A Channel Limits Version: V3.0 Remote S/N: 2766289Cable Type: Cat 6A U/UTP NVP: 68.2% Main Adapter: DSX-CHA004Calibration Date: 08/14/2014 Remote Adapter: DSX-CHA004
Project: DEFAULT Ochito Cat 6A Tests.flw
LinkWare™ PC Version 9.3
Length (ft), Limit 328 [Pair 36] 207Prop. Delay (ns), Limit 555 [Pair 12] 310Delay Skew (ns), Limit 50 [Pair 12] 2Resistance (ohms) [Pair 78] 19.1
Insertion Loss Margin (dB) [Pair 45] 6.4Frequency (MHz) [Pair 45] 500.0Limit (dB) [Pair 45] 49.3
Worst Case Margin Worst Case ValuePASS MAIN SR MAIN SRWorst Pair 36-45 12-36 45-78 45-78NEXT (dB) 1.9 2.6 9.3 7.6Freq. (MHz) 4.9 23.9 494.0 498.0Limit (dB) 61.7 50.4 26.2 26.1Worst Pair 45 36 45 45PS NEXT (dB) 2.6 2.7 8.3 8.2Freq. (MHz) 5.0 23.6 494.0 498.0Limit (dB) 59.0 47.8 23.4 23.3
PASS MAIN SR MAIN SRWorst Pair 12-78 78-12 36-45 36-45ACR-F (dB) 2.3 2.3 7.1 5.8Freq. (MHz) 1.0 1.0 466.0 473.0Limit (dB) 63.3 63.3 9.9 9.8Worst Pair 12 12 45 45PS ACR-F (dB) 3.6 3.5 8.9 7.8Freq. (MHz) 1.0 1.0 466.0 476.0Limit (dB) 60.3 60.3 6.9 6.7
N/A MAIN SR MAIN SRWorst Pair 36-45 12-36 12-45 45-78ACR-N (dB) 2.0 3.4 16.0 16.3Freq. (MHz) 4.9 23.6 495.0 498.0Limit (dB) 57.1 40.5 -22.8 -23.1Worst Pair 45 36 45 45PS ACR-N (dB) 2.6 3.2 15.3 14.7Freq. (MHz) 4.9 8.0 500.0 498.0Limit (dB) 54.6 49.8 -26.1 -25.9
PASS MAIN SR MAIN SRWorst Pair 78 12 45 78RL (dB) 0.6* 1.0* 11.5 11.0Freq. (MHz) 2.3 2.4 387.0 434.0Limit (dB) 19.0 19.0 6.1 6.0
Compliant Network Standards:10BASE-T 100BASE-TX 100BASE-T41000BASE-T 10GBASE-T ATM-25ATM-51 ATM-155 100VG-AnyLanTR-4 TR-16 Active TR-16 Passive
207 ft
Wire Map (T568A)PASS
Insertion Loss (dB)
MHz
0
10
20
30
40
50
60
0 250 500
NEXT (dB)
MHz
0
20
40
60
80
100
0 250 500
NEXT @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-F (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-F @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-N (dB)
MHz
-40
0
40
80
0 250 500
ACR-N @ Remote (dB)
MHz
-40
0
40
80
0 250 500
RL (dB)
MHz
0
20
40
60
80
100
0 250 500
RL @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
* Measurement is within the accuracy limits of the instrument.
Cable ID: 591A_591B_788A_788B Test Summary: PASSDate / Time: 08/20/2015 11:44:01 AM Operator: KLW Model: DSX-5000Headroom 1.9 dB (NEXT 36-45) Software Version: V3.0 Build 6 Main S/N: 2766352Test Limit: TIA Cat 6A Channel Limits Version: V3.0 Remote S/N: 2766289Cable Type: Cat 6A U/UTP NVP: 68.2% Main Adapter: DSX-CHA004Calibration Date: 08/14/2014 Remote Adapter: DSX-CHA004
Project: DEFAULT Ochito Cat 6A Tests.flw
LinkWare™ PC Version 9.3
Length (ft), Limit 328 [Pair 36] 207Prop. Delay (ns), Limit 555 [Pair 12] 310Delay Skew (ns), Limit 50 [Pair 12] 2Resistance (ohms) [Pair 78] 19.1
Insertion Loss Margin (dB) [Pair 45] 6.4Frequency (MHz) [Pair 45] 500.0Limit (dB) [Pair 45] 49.3
Worst Case Margin Worst Case ValuePASS MAIN SR MAIN SRWorst Pair 36-45 12-36 45-78 45-78NEXT (dB) 1.9 2.6 9.3 7.6Freq. (MHz) 4.9 23.9 494.0 498.0Limit (dB) 61.7 50.4 26.2 26.1Worst Pair 45 36 45 45PS NEXT (dB) 2.6 2.7 8.3 8.2Freq. (MHz) 5.0 23.6 494.0 498.0Limit (dB) 59.0 47.8 23.4 23.3
PASS MAIN SR MAIN SRWorst Pair 12-78 78-12 36-45 36-45ACR-F (dB) 2.3 2.3 7.1 5.8Freq. (MHz) 1.0 1.0 466.0 473.0Limit (dB) 63.3 63.3 9.9 9.8Worst Pair 12 12 45 45PS ACR-F (dB) 3.6 3.5 8.9 7.8Freq. (MHz) 1.0 1.0 466.0 476.0Limit (dB) 60.3 60.3 6.9 6.7
N/A MAIN SR MAIN SRWorst Pair 36-45 12-36 12-45 45-78ACR-N (dB) 2.0 3.4 16.0 16.3Freq. (MHz) 4.9 23.6 495.0 498.0Limit (dB) 57.1 40.5 -22.8 -23.1Worst Pair 45 36 45 45PS ACR-N (dB) 2.6 3.2 15.3 14.7Freq. (MHz) 4.9 8.0 500.0 498.0Limit (dB) 54.6 49.8 -26.1 -25.9
PASS MAIN SR MAIN SRWorst Pair 78 12 45 78RL (dB) 0.6* 1.0* 11.5 11.0Freq. (MHz) 2.3 2.4 387.0 434.0Limit (dB) 19.0 19.0 6.1 6.0
Compliant Network Standards:10BASE-T 100BASE-TX 100BASE-T41000BASE-T 10GBASE-T ATM-25ATM-51 ATM-155 100VG-AnyLanTR-4 TR-16 Active TR-16 Passive
207 ft
Wire Map (T568A)PASS
Insertion Loss (dB)
MHz
0
10
20
30
40
50
60
0 250 500
NEXT (dB)
MHz
0
20
40
60
80
100
0 250 500
NEXT @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-F (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-F @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-N (dB)
MHz
-40
0
40
80
0 250 500
ACR-N @ Remote (dB)
MHz
-40
0
40
80
0 250 500
RL (dB)
MHz
0
20
40
60
80
100
0 250 500
RL @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
* Measurement is within the accuracy limits of the instrument.
Cable ID: 591A_591B_788A_788B Test Summary: PASSDate / Time: 08/20/2015 11:44:01 AM Operator: KLW Model: DSX-5000Headroom 1.9 dB (NEXT 36-45) Software Version: V3.0 Build 6 Main S/N: 2766352Test Limit: TIA Cat 6A Channel Limits Version: V3.0 Remote S/N: 2766289Cable Type: Cat 6A U/UTP NVP: 68.2% Main Adapter: DSX-CHA004Calibration Date: 08/14/2014 Remote Adapter: DSX-CHA004
Project: DEFAULT Ochito Cat 6A Tests.flw
LinkWare™ PC Version 9.3
Length (ft), Limit 328 [Pair 36] 207Prop. Delay (ns), Limit 555 [Pair 12] 310Delay Skew (ns), Limit 50 [Pair 12] 2Resistance (ohms) [Pair 78] 19.1
Insertion Loss Margin (dB) [Pair 45] 6.4Frequency (MHz) [Pair 45] 500.0Limit (dB) [Pair 45] 49.3
Worst Case Margin Worst Case ValuePASS MAIN SR MAIN SRWorst Pair 36-45 12-36 45-78 45-78NEXT (dB) 1.9 2.6 9.3 7.6Freq. (MHz) 4.9 23.9 494.0 498.0Limit (dB) 61.7 50.4 26.2 26.1Worst Pair 45 36 45 45PS NEXT (dB) 2.6 2.7 8.3 8.2Freq. (MHz) 5.0 23.6 494.0 498.0Limit (dB) 59.0 47.8 23.4 23.3
PASS MAIN SR MAIN SRWorst Pair 12-78 78-12 36-45 36-45ACR-F (dB) 2.3 2.3 7.1 5.8Freq. (MHz) 1.0 1.0 466.0 473.0Limit (dB) 63.3 63.3 9.9 9.8Worst Pair 12 12 45 45PS ACR-F (dB) 3.6 3.5 8.9 7.8Freq. (MHz) 1.0 1.0 466.0 476.0Limit (dB) 60.3 60.3 6.9 6.7
N/A MAIN SR MAIN SRWorst Pair 36-45 12-36 12-45 45-78ACR-N (dB) 2.0 3.4 16.0 16.3Freq. (MHz) 4.9 23.6 495.0 498.0Limit (dB) 57.1 40.5 -22.8 -23.1Worst Pair 45 36 45 45PS ACR-N (dB) 2.6 3.2 15.3 14.7Freq. (MHz) 4.9 8.0 500.0 498.0Limit (dB) 54.6 49.8 -26.1 -25.9
PASS MAIN SR MAIN SRWorst Pair 78 12 45 78RL (dB) 0.6* 1.0* 11.5 11.0Freq. (MHz) 2.3 2.4 387.0 434.0Limit (dB) 19.0 19.0 6.1 6.0
Compliant Network Standards:10BASE-T 100BASE-TX 100BASE-T41000BASE-T 10GBASE-T ATM-25ATM-51 ATM-155 100VG-AnyLanTR-4 TR-16 Active TR-16 Passive
207 ft
Wire Map (T568A)PASS
Insertion Loss (dB)
MHz
0
10
20
30
40
50
60
0 250 500
NEXT (dB)
MHz
0
20
40
60
80
100
0 250 500
NEXT @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-F (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-F @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-N (dB)
MHz
-40
0
40
80
0 250 500
ACR-N @ Remote (dB)
MHz
-40
0
40
80
0 250 500
RL (dB)
MHz
0
20
40
60
80
100
0 250 500
RL @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
* Measurement is within the accuracy limits of the instrument.
Cable ID: 591A_591B_788A_788B Test Summary: PASSDate / Time: 08/20/2015 11:44:01 AM Operator: KLW Model: DSX-5000Headroom 1.9 dB (NEXT 36-45) Software Version: V3.0 Build 6 Main S/N: 2766352Test Limit: TIA Cat 6A Channel Limits Version: V3.0 Remote S/N: 2766289Cable Type: Cat 6A U/UTP NVP: 68.2% Main Adapter: DSX-CHA004Calibration Date: 08/14/2014 Remote Adapter: DSX-CHA004
Project: DEFAULT Ochito Cat 6A Tests.flw
LinkWare™ PC Version 9.3
Length (ft), Limit 328 [Pair 36] 207Prop. Delay (ns), Limit 555 [Pair 12] 310Delay Skew (ns), Limit 50 [Pair 12] 2Resistance (ohms) [Pair 78] 19.1
Insertion Loss Margin (dB) [Pair 45] 6.4Frequency (MHz) [Pair 45] 500.0Limit (dB) [Pair 45] 49.3
Worst Case Margin Worst Case ValuePASS MAIN SR MAIN SRWorst Pair 36-45 12-36 45-78 45-78NEXT (dB) 1.9 2.6 9.3 7.6Freq. (MHz) 4.9 23.9 494.0 498.0Limit (dB) 61.7 50.4 26.2 26.1Worst Pair 45 36 45 45PS NEXT (dB) 2.6 2.7 8.3 8.2Freq. (MHz) 5.0 23.6 494.0 498.0Limit (dB) 59.0 47.8 23.4 23.3
PASS MAIN SR MAIN SRWorst Pair 12-78 78-12 36-45 36-45ACR-F (dB) 2.3 2.3 7.1 5.8Freq. (MHz) 1.0 1.0 466.0 473.0Limit (dB) 63.3 63.3 9.9 9.8Worst Pair 12 12 45 45PS ACR-F (dB) 3.6 3.5 8.9 7.8Freq. (MHz) 1.0 1.0 466.0 476.0Limit (dB) 60.3 60.3 6.9 6.7
N/A MAIN SR MAIN SRWorst Pair 36-45 12-36 12-45 45-78ACR-N (dB) 2.0 3.4 16.0 16.3Freq. (MHz) 4.9 23.6 495.0 498.0Limit (dB) 57.1 40.5 -22.8 -23.1Worst Pair 45 36 45 45PS ACR-N (dB) 2.6 3.2 15.3 14.7Freq. (MHz) 4.9 8.0 500.0 498.0Limit (dB) 54.6 49.8 -26.1 -25.9
PASS MAIN SR MAIN SRWorst Pair 78 12 45 78RL (dB) 0.6* 1.0* 11.5 11.0Freq. (MHz) 2.3 2.4 387.0 434.0Limit (dB) 19.0 19.0 6.1 6.0
Compliant Network Standards:10BASE-T 100BASE-TX 100BASE-T41000BASE-T 10GBASE-T ATM-25ATM-51 ATM-155 100VG-AnyLanTR-4 TR-16 Active TR-16 Passive
207 ft
Wire Map (T568A)PASS
Insertion Loss (dB)
MHz
0
10
20
30
40
50
60
0 250 500
NEXT (dB)
MHz
0
20
40
60
80
100
0 250 500
NEXT @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-F (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-F @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-N (dB)
MHz
-40
0
40
80
0 250 500
ACR-N @ Remote (dB)
MHz
-40
0
40
80
0 250 500
RL (dB)
MHz
0
20
40
60
80
100
0 250 500
RL @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
* Measurement is within the accuracy limits of the instrument.
FLUKE DSX-5000MAIN
FLUKE DSX-5000REMOTE
PIN CONTACT858-016
SOCKET CONTACT858-017
CAT 6a CABLE963-033-26
RJ-45 PLUG RJ-45 PLUG
1.5m ADAPTER CABLE
SEGMENT 115m
SEGMENT 215m
SEGMENT 320m
SEGMENT 420m
Signal Integrity Data: SuperFly Datalink White for Ethernet
10GBASE-T CATEGORY 6A ETHERNET COMPLIANCE TESTING FOR SUPERFLY DATALINK WHITE
Testing was per formed to assure compliance with TIA/EIA 568-C.2 Cat 6A requirements. Four cordset segments were connected in series for a combined length of 70m, with a total of five mated pairs of Octaxial SuperFly Datalink (White) contacts. REF: Glenair Test Report GT-15-121.
SuperSpeed Pair 1 USB 3.0 Upper LimitUSB 3.0 Lower LimitSuperSpeed Pair 2
150.0
140.0
130.0
120.0
110.0
100.0
90.0
80.070.0
60.0
400 500 600 700 800 900 1000 1100 1200 1300 1400Time (ps)
Imp
edan
ce (
Oh
ms)
TDR Profi le 50ps RT 20%-80%
SuperFly Datal ink BluePC tai l contact to Cable Assembly
Test Board
PC Tai l
Mated Contacts
Crimp Area
Cable
0.3m 1.5m 1.8m USB 3.0 Limit
2 4 6 8Frequency (GHz)
NEXT (SuperSpeed Pairs)SuperFly Datal ink Blue Cable Assembly
0-10
0
-20-30-40-50-60-70-80
S (d
B)
0.3m SS10.3m SS21.5m SS11.5m SS21.8m SS11.8m SS2USB 3.0 Limit
0 2 4 6 8Frequency (GHz)
De-Embedded Insertion Loss
SuperFly Datal ink BlueCable Assembly
0
-5
-10
-15
-20
-25
-30
-35-40
S (d
B) 2 mated contacts}
2 mated contacts}
3 mated contacts}
0.3m 1.5m 1.8m USB 3.0 Limit
2 4 6 8Frequency (GHz)
NEXT (SuperSpeed to D+/D-)SuperFly Datal ink Blue Cable Assembly
0-10
0
-20-30-40-50-60-70-80
S (d
B)
0.3m 1.5m 1.8m USB 3.0 Limit
2 4 6 8Frequency (GHz)
FEXT (SuperSpeed to D+/D-)SuperFly Datal ink Blue Cable Assembly
0-10
0
-20-30-40-50-60-70-80
S (d
B)
2 4 6 8Frequency (GHz)
Mode Conversion (SCD21)SuperFly Datal ink Blue Cable Assembly
0-10
0
-20-30-40-50-60-70-80
S (d
B)
0.3m SS10.3m SS2
1.5m SS11.5m SS2
USB 3.0 Limit
1.8m SS11.8m SS2
Signal Integrity Data: SuperFly Datalink Blue for USB 3.0
SUPERSPEED USB COMPLIANCE TESTING FOR SUPERFLY DATALINK BLUE
1110 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito® W
hite
El O
chito
® Whi
te
882-001 ComponentsConnector is supplied unassembled. Assembly instructions are packaged with kit.
Backshell-Grommet Assembly
O-ring Bushing
Retainer Contacts
Inner Insulator and Spline
Outer Insulator
Shell
How To Order 882-001 SuperFly Datalink Plugs Wire Size
(AWG)
Cat 6A Cable Type
Cable Part No. Cable Dia.
Shell Material and FinishAluminum/
Electroless NickelAluminum/ Nickel-PTFE
Aluminum/BlackZinc-Nickel
Aluminum/ Gold
Stainless Steel/Nickel-PTFE
26 S/UTP 963-003-26 .220 (5.56) 882-001-M-01 882-001-MT-01 882-001-ZR-01 882-001-Z2-01 882-001-ZMT-0126 S/FTP 963-033-26 .220 (5.56) 882-001-M-02 882-001-MT-02 882-001-ZR-02 882-001-Z2-02 882-001-ZMT-0224 S/UTP 963-037-24 .260 (6.60) 882-001-M-03 882-001-MT-03 882-001-ZR-03 882-001-Z2-03 882-001-ZMT-0324 S/FTP 963-033-24 .260 (6.60) 882-001-M-04 882-001-MT-04 882-001-ZR-04 882-001-Z2-04 882-001-ZMT-04
882-001 Cable Plug, Push-Pull QDC Coupling, 10GbE
10GbE. Ultraminiature. High performance. 882-001 SuperFly Datalink Octaxial connectors are compatible with #24 and #26 AWG Category 6A Ethernet cable. Supplied as unassembled kit. Terminate wires to contacts with crimp tool (purchased separately). 882-001 plugs feature push-pull mating and demating. Braided cable shield terminates to connector with supplied bushing. Mates to 882-002 and 882-005 receptacles.
Specifications
Q Operating temp.: -65° to +175°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
Construction
Q Shell, backshell: aluminum alloy or stainless steel
Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommet: fluorosilicone Q O-ring: fluorosilicone Q Bushing, retainer, spline: copper alloy,
electroless nickel plated
SIZE AND WEIGHT SAVING
• Smallest 10GbE aerospace-grade connector
• Integral strain relief and cable seal
• High density contacts
FAST ASSEMBLY
• Crimp contacts
• Easy shield termination
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
• Temperature extremes
• Corrosion resistance
Contact Crimp Tools
Crimp Tool Positioner for Hand Crimp Tool
809-015(M22520/2-01)
859-101(K1906)
1.50 (38.1) MAX
CABLE (REF)
Ø .227(5.76)
POLARIZATION KEY
PIN NO. DESIGNATION(NOT MARKED ON PART)
Ø .415(10.54)
12
3
4
5 6
7
8
.375 (9.53) HEX
882-002 ComponentsConnector is supplied unassembled. Assembly instructions are packaged with kit.
How To Order 882-002 SuperFly Datalink Push-Pull Cable Receptacles Wire Size
(AWG)
Cat 6A Cable Type
Cable Part No. Cable Dia.
Shell Material and FinishAluminum/
Electroless NickelAluminum/ Nickel-PTFE
Aluminum/BlackZinc-Nickel
Aluminum/ Gold
Stainless Steel/Nickel-PTFE
26 S/UTP 963-003-26 .220 (5.56) 882-002-M-01 882-002-MT-01 882-002-ZR-01 882-002-Z2-01 882-002-ZMT-0126 S/FTP 963-033-26 .220 (5.56) 882-002-M-02 882-002-MT-02 882-002-ZR-02 882-002-Z2-02 882-002-ZMT-0224 S/UTP 963-037-24 .260 (6.60) 882-002-M-03 882-002-MT-03 882-002-ZR-03 882-002-Z2-03 882-002-ZMT-0324 S/FTP 963-033-24 .260 (6.60) 882-002-M-04 882-002-MT-04 882-002-ZR-04 882-002-Z2-04 882-002-ZMT-04
882-002 Cable Receptacle, Push-Pull QDC Coupling, 10GbE
10GbE. Ultraminiature. High performance. 882-002 SuperFly Datalink Octaxial connectors are compatible with shielded flight-grade Cat 6A #24 and #26 AWG Ethernet cable. Supplied as unassembled kit. Terminate wires to contacts with crimp tool (purchased separately). Connector interface features EMI spring and fluorosilicone O-ring for watertight seal. Braided cable shield terminates to connector with supplied bushing. Mates to 882-001, 882-017 and 882-032 plug.
Specifications
Q Operating temp.: -65° to +175°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
Construction
Q Shell, backshell: aluminum alloy or stainless steel
Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommet: fluorosilicone Q O-rings: fluorosilicone Q EMI spring: stainless steel, gold plated Q Bushing, retainer, spline: copper alloy,
electroless nickel plated
SIZE AND WEIGHT SAVING
• Smallest 10GbE aerospace-grade connector
• Integral strain relief and cable seal
• High density contacts
FAST ASSEMBLY
• Crimp contacts
• Easy shield termination
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
• Temperature extremes
• Corrosion resistance
Contact Crimp Tools
Hand Crimp Tool Positioner for Hand Crimp Tool
809-015(M22520/2-01)
859-101(K1906)
1.50 (38.1) MAX
CABLE (REF)
.375 (9.53) HEXPOLARIZATION
KEYWAY
PIN NO. DESIGNATION(NOT MARKED ON PART)
Ø .415(10.54)
1 2
3
4
56
7
8
Backshell-Grommet Assembly
O-ring Bushing
Retainer Contacts
Inner Insulator and Spline
Outer Insulator
Shell Assembly
1312 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito® W
hite
El O
chito
® Whi
te
882-005 PC Tail Panel Receptacle, Push-Pull Coupling, 10GbE
10GbE. Ultraminiature. Rear panel jam-nut mount. PCB terminals.882-005 receptacles have eight socket contacts. Attach to .100" (2.54 mm) maximum thickness panel with spanner nut. PC tail contacts are gold plated or solder dipped in 63/37 tin-lead. Contacts are epoxy-sealed and are non-removable. Gold-plated EMI interface spring, fluorosilicone O-rings for panel sealing and for inter face sealing. Mates to 882-001, 882-017 and 882-032 plugs.
10GbE. Ultraminiature. Rear panel jam-nut mount. PCB terminals.882-005 receptacles have eight pin contacts. Attach to .100" (2.54 mm) maximum thickness panel with spanner nut. PC tail contacts are gold plated or solder dipped in 63/37 tin-lead. Contacts are epoxy-sealed and are non-removable. Gold-plated EMI interface spring, fluorosilicone O-rings for panel sealing and for inter face sealing. Mates to 882-002, 882-005, & 885-008.
SIZE AND WEIGHT SAVING
• Smallest 10Gb Ethernet aerospace-grade connector
FAST MATING
• Push-to-mate, pull to de-mate
• 5 pounds breakaway force
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
SIZE AND WEIGHT SAVING
• Smallest 10Gb Ethernet aerospace-grade connector
FAST MATING
• Push-to-mate, pull to de-mate
• 5 pounds breakaway force
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
Recommended PC Board Layout
RECOMMENDED PCB LAYOUTCONNECTOR SIDE
SEE AN0002 FOR OPTIMAL PERFORMANCE(MAINTAIN Ø.036 ON Ø.269 FOR GROUND PINS)
8X Ø.020 (0.51)
AØ.002 (0.05)
4X Ø.036 (0.91)
AØ.003 (.08)
.046 (1.17)
.125 (3.17)
Ø.269 (6.83)
Recommended PC Board Layout
RECOMMENDED PCB LAYOUTCONNECTOR SIDE
SEE AN0002 FOR OPTIMAL PERFORMANCE(MAINTAIN Ø.036 ON Ø.269 FOR GROUND PINS)
8X Ø.020 (0.51)
AØ.002 (0.05)
4X Ø.036 (0.91)
AØ.003 (.08)
.046 (1.17)
.125 (3.17)
Ø.269 (6.83)
Recommended Panel Cutout
.300 ± .003(7.62 ± 0.08))
Ø .344 ± .003(8.74 ± 0.08)
R .015 (0.38) MAX4X
Recommended Panel Cutout
.300 ± .003(7.62 ± 0.08))
Ø .344 ± .003(8.74 ± 0.08)
R .015 (0.38) MAX4X
How To OrderSample Part Number 882-005 -M G -.125
Product 882-005 = SuperFly Datalink Panel Mount PC Tail Receptacle, Push-Pull
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
PC Tail Finish S = Solder dip, 63/37 tin-lead G = Gold
PC Tail Length .080 = .080" (2.03 mm.) .125 = .125" (3.18 mm.).175 = .175" (4.45 mm.) .200 = .200" (5.08 mm.)
How To OrderSample Part Number 882-017 -M G -.125
Product 882-017 = SuperFly Datalink Panel Mount PC Tail Plug, Push-Pull
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
PC Tail Finish S = Solder dip, 63/37 tin-lead G = Gold
PC Tail Length .080 = .080 in. (2.03 mm.) .125 = .125 in. (3.18 mm.).175 = .175 in. (4.45 mm.) .200 = .200 in. (5.08 mm.)
Specifications Q Operating temp.: -65° to +175°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
Specifications Q Operating temp.: -65° to +175°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
Construction Q Shell, jam-nut: aluminum alloy or SST Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q O-rings: fluorosilicone Q EMI spring: stainless steel, gold plated Q Spline: copper alloy, electroless nickel
plated Q Potting: epoxy
Construction Q Shell, jam-nut: aluminum alloy or SST Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q O-rings: fluorosilicone Q EMI spring: stainless steel, gold plated Q Spline: copper alloy, electroless nickel
plated Q Potting: epoxy
POLARIZATION KEYWAY
8
7
6 5
4
3
21
SPANNER NUT
COIL SPRING
O-RINGS
.020 (0.51)
8X .015 (.38)
4X .030 (.76)
"L"
.620 (5.75) MAX
.455 (11.56) MAX
.100 (2.54) MAXPANEL THICKNESS
.335 MAX
Spanner Nut Tightening ToolNickel-plated tool steel,¼" sq. drive
13 - 18 in.-lbs. recommended torque
1.00 (25.4)
600-202-E
Spanner Nut Tightening ToolNickel-plated tool steel,¼" sq. drive
13 - 18 in.-lbs. recommended torque
1.00 (25.4)
600-202-E
882-017 PCB Plug, Push-Pull QDC Coupling, 10GbE
8
7
65
4
3
2 1
KEYPOLARIZATION
O-RINGSPANNER NUT
4X Ø.030
"L"
8X Ø.015
Ø.455 MAX
.100 (2.54) MAXPANEL THICKNESS
.395 (10.03)
MAX
MAX .690 (17.53)
1514 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito® W
hite
El O
chito
® Whi
te
882-032 90° PC Tail Panel Mount Plug, Push-Pull Coupling, 10GbE
10GbE. Ultraminiature. Rear panel jam-nut mount. PCB terminals.882-005 receptacles have eight pin contacts. Attach to .100" (2.54 mm) maximum thickness panel with spanner nut. PC tail contacts are gold plated or solder dipped in 63/37 tin-lead. Contacts are epoxy-sealed and are non-removable. Gold-plated EMI interface spring, fluorosilicone O-rings for panel sealing and for inter face sealing. Mates to 882-002, 882-005 and 882-008.
SIZE AND WEIGHT SAVING
• Smallest 10Gb Ethernet aerospace-grade connector
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
Recommended PC Board Layout
Recommended Panel Cutout
.300 ± .003(7.62 ± 0.08))
Ø .344 ± .003(8.74 ± 0.08)
R .015 (0.38) MAX4X
Specifications Q Operating temp.: -65° to +175°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
Construction Q Shell, jam-nut: aluminum alloy or SST Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q O-rings: fluorosilicone Q EMI spring: stainless steel, gold plated Q Spline: copper alloy, electroless nickel
plated Q Potting: epoxy
Spanner Nut Tightening ToolNickel-plated tool steel,¼" sq. drive
13 - 18 in.-lbs. recommended torque
1.00 (25.4)
600-202-E
How To Order 882-032 Threaded Coupling Receptacles
Shell Matl/ FinishSalt
Spray Hours
PC Tail Option
Gold Plated Solder Dipped63/37 Sn/Pb
Al/ Electroless Nickel 48 882-032-MG-.200 882-032-MS-.200Al/ Nickel-PTFE 500 882-032-MTG-.200 882-032-MTS-.200Al/ Black Zinc-Nickel 500 882-032-ZRG-.200 882-032-ZRS-.200Al/ Gold 48 882-032-Z2G-.200 882-032-Z2S-.200SST/ Nickel-PTFE 500 882-032-ZMTG-.200 882-032-ZMTS-.200
.0022X 2-56 UNC 2B THD
81
SPANNER NUT
O-RING
45.150 (3.81)
MAX
.710(18.03)MAX
4X.032 (.81).030 (.76)
.140 (3.56)
.300(7.62)
.535 (13.59)MAX
.875 (22.22)MAX
8X Ø.016 (0.41).014 (0.36)L
.478 (12.14)MAX
.100 (2.54) MAXPANEL THICKNESS
PC Board Layout
Panel Cutout
.300 ± .003(7.62 ± 0.08))
Ø .344 ± .003(8.74 ± 0.08)
R .015 (0.38) MAX4X
Spanner Nut Tightening ToolNickel-plated tool steel,¼" sq. drive
13 - 18 in.-lbs. recommended torque
1.00 (25.4)
600-202-E
882-008 90° PC Tail Panel Mount Receptacle, Push-Pull Coupling, 10GbE
10GbE. Ultraminiature. Rear panel jam-nut mount. 90° PCB terminals.882-008 SuperFly Datalink receptacles have eight socket contacts. Attach to .100 (2.54) maximum thickness panel with spanner nut. PC tail contacts are gold plated or solder dipped in 63/37 tin-lead. Contacts are epoxy-sealed and are non-removable. Gold-plated EMI interface spring, fluorosilicone O-rings for panel sealing and for interface sealing. Mates to 882-001, -017, -032 receptacles.
SIZE AND WEIGHT SAVING • Smallest 10Gb Ethernet aerospace-
grade connector
FAST ASSEMBLY • Pre-tinned PC tail contacts
• Epoxy-sealed terminals
HARSH ENVIRONMENT • EMI protection
• Water Ingress
• Shock and vibration
Specifications Q Operating temp.: -65° to +175°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
Construction Q Shell, jam-nut: aluminum alloy or SST Q Insulators and tray: high-grade rigid
dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q O-rings: fluorosilicone Q EMI spring: stainless steel, gold plated Q Spline: copper alloy, nickel plated Q Potting: epoxy
Ø.016/.014Ø(0.41/0.36)
.478(12.14)MAX
.150(3.81)MIN
PC TAIL LENGTH.200 (5.08)
O-RINGO-RING
.710 (18.03)MAX
SPANNER NUTEMI SPRING
.100 (2.54)MAX PANEL THICKNESS
45°POLARIZATION KEYWAY
PIN NO. DESIGNATION(NOT MARKED ON PART)
8
7
6
54
3
21
Ø .016/.014(0.41/0.36) 8X
.300(7.62)
.535(13.58)MAX
4X
M8.5 X 0.75-6g THD
.875 (22.23) MAX
.032/.030(0.81/0.76)
2X 2-56 UNC-2B THD
.140 (3.56)
Ø .002 M
8x
How To Order 882-008 Push-Pull Receptacles
Shell Matl/ FinishSalt
Spray Hours
PC Tail Option
Gold Plated Solder Dipped63/37 Sn/Pb
Al/ Electroless Nickel 48 882-008-MG-.200 882-008-MS-.200Al/ Nickel-PTFE 500 882-008-MTG-.200 882-008-MTS-.200Al/ Black Zinc-Nickel 500 882-008-ZRG-.200 882-008-ZRS-.200Al/ Gold 48 882-008-Z2G-.200 882-008-Z2S-.200SST/ Nickel-PTFE 500 882-008-ZMTG-.200 882-008-ZMTS-.200
Connector side of PCBSee AN0002 for optimal perfomance
8X Ø .020 (0.51) MIN
Ø .247(6.27) .300
(7.62)
.125 (3.17)
.046 (1.17)
Ø .002 M
M .510 (12.95)
4X Ø .045 (1.14)
minØ .005
2x Ø .097 (2.46).091 (2.31)
1 2
34
567
8
Connector side of PCBSee AN0002 for optimal perfomance
8X Ø .020 (0.51) MIN
Ø .247(6.27) .300
(7.62)
.125 (3.17)
.046 (1.17)
Ø .002 M
M .510 (12.95)
4X Ø .045 (1.14)
minØ .005
2x Ø .097 (2.46).091 (2.31)
1 2
34
567
8
1716 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito® W
hite
El O
chito
® Whi
te
8571-0007 Pre-Wired QDC Cordset, Single-Ended, 10GbE
Wiring Diagram
Lower installed cost. 100% tested. Save assembly time and cost with pre-wired SuperFly Datalink “White” assemblies for 10Gb Ethernet. These single-ended push-pull cordsets are terminated to Category 6A flight-grade shielded cable. Cable options include single or double shielding, 24 AWG or 26 AWG stranded conductors. Series 882 QDC connectors are designed for demanding aerospace environments.
How To OrderSample Part Number 8571-0007 -MT -05 -60
Product8571-0007 = Pre-wired SuperFly
Datalink assembly, QDC, single-ended
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
Order CodeConnector Type, Wire Size and Cable Type
01 = Plug, #26 AWG, S/UTP* P/N 963-003-2602 = Receptacle, #26 AWG, S/UTP* P/N 963-003-2603 = Plug, #26 AWG, S/FTP** P/N 963-033-2604 = Receptacle, #26 AWG, S/FTP** P/N 963-033-2605 = Plug, #24 AWG, S/UTP* P/N 963-037-2406 = Receptacle, #24 AWG, S/UTP* P/N 963-037-2407 = Plug, #24 AWG, S/FTP** P/N 963-033-2408 = Receptacle, #24 AWG, S/FTP** P/N 963-033-24*S/UTP cable has overall braid shield**S/FTP cable has overall braid shield plus foil wrap on pairs
Overall Length Length in Inches (12 inch minimum)
Specifications Q Operating temp.: -65° to +175°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 200 MΩ min.
Q Durability: 500 mating cycles
Construction
Q Shell, backshell: aluminum alloy or stainless steel
Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommets: fluorosilicone Q O-rings: fluorosilicone Q Bushing, retainer, spline: copper alloy,
electroless nickel plated Q Cable: aerospace-grade fluoropolymer
per AS6070.
SIZE AND WEIGHT SAVING
• <1/2 inch (12.7 mm.) diameter
• Push-pull quick-disconnect
LOWER INSTALLED COST
• Factory-terminated
• 100% tested
HARSH ENVIRONMENT
• AS6070 type aerospace grade Category 6A cable
8
7
6
5
4
3
2
1 BRN
WHT/BRNBLU
WHT/BLU
ORN
WHT/ORN
GRN
WHT/GRN
OVERALL LENGTH (INCHES)TOLERANCE: +1.80 (+45.7)/-0.0 IF LENGTH <= 60 (1524)
TOLERANCE +3%/-0 IF LENGTH > 60
RECEPTACLE CONNECTOR882-002
IDENTIFICATION LABEL
8571-0007-XX-XX-XXGLENAIR YYWW 06324
8571-0007-XX-XX-XXGLENAIR YYWW 06324
1.50 (38.1) MAX
Ø .415(10.54)
.375 (9.53) HEX
Ø .415(10.54)
PLUG CONNECTOR882-001
AEROSPACE GRADE CAT 6A ETHERNET CABLE
POLARIZATION KEY
PIN NUMBERS NOT MARKED ON PART
123
45 6
7
8
1 23
456
7
8
2.00 (50.80) REF
2.00 (50.80) REF
8571-0008 Pre-Wired QDC Cordset, Plug-to-Receptacle, 10GbE
Wiring Diagram How To OrderSample Part Number 8571-0008 -ZMT -03 -36
Product8571-0008 = Pre-wired SuperFly
Datalink assembly, QDC plug to receptacle
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
Cable Type
01 = Category 6A, #26 AWG, S/UTP* P/N 963-003-2602 = Category 6A, #26 AWG, S/FTP** P/N 963-033-2603 = Category 6A, #24 AWG, S/UTP* P/N 963-037-2404 = Category 6A, #24 AWG, S/FTP** P/N 963-033-24 *S/UTP cable has overall braid shield**S/FTP cable has overall braid shield plus foil wrap on pairs
Overall Length Length in Inches (12 inch minimum)
Specifications Q Operating temp.: -65° to +175°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 200 MΩ min.
Q Durability: 2000 mating cycles
Construction
Q Shell, backshell: aluminum alloy or stainless steel
Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommets: fluorosilicone Q O-rings: fluorosilicone Q Bushing, retainer, spline: copper alloy,
electroless nickel plated Q Cable: aerospace-grade fluoropolymer
per AS6070. Cable construction details are shown on following pages.
PLUG RECEPTACLE
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1 BRN
WHT/BRN
BLU
WHT/BLU
ORN
WHT/ORNGRN
WHT/GRN
SIZE AND WEIGHT SAVING
• <1/2 inch (12.7 mm.) diameter
• Push-pull quick-disconnect
LOWER INSTALLED COST
• Factory-terminated
• 100% tested
HARSH ENVIRONMENT
• AS6070 type aerospace grade Category 6A cable
Lower installed cost. 100% tested. Save assembly time and cost with pre-wired SuperFly Datalink “White” assemblies for 10Gb Ethernet. These back-to-back push-pull cordsets are terminated to Category 6A flight-grade shielded cable. Two cable constructions are available: S/UTP (unshielded pairs with overall braid shield) or S/FTP (foil shielded pairs with overall braid). 24 AWG or 26 AWG stranded conductors. Series 882 QDC connectors are designed for demanding aerospace environments.
OVERALL LENGTH (INCHES)TOLERANCE: +1.80 (+45.7)/-0.0 IF LENGTH <= 60 (1524)
TOLERANCE +3%/-0 IF LENGTH > 60
RECEPTACLE CONNECTOR882-002
IDENTIFICATION LABEL
8571-0008-XXX-XX-XXGLENAIR YYWW 06324
1.50 (38.1) MAX 1.50 (38.1) MAX
Ø .415(10.54)
.375 (9.53) HEX .375 (9.53) HEX
Ø .415(10.54)
PLUG CONNECTOR882-001
AEROSPACE GRADECAT 6A ETHERNET CABLE
POLARIZATION KEY
PLUG MATING FACE RECEPTACLE MATING FACE
123
45 6
7
8
POLARIZATION KEYWAY
1 23
456
7
8PIN NUMBERS DO NOT
APPEAR ON CONNECTOR
2.00 (50.80) REF
1918 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito® W
hite
El O
chito
® Whi
te
8571-0009 QDC Patch Cord, SuperFly to RJ45, 10GbE, Ground
Wiring Diagram How To OrderSample Part Number 8571-0009 -MT -02 -36
Product8571-0009 = SuperFly Datalink patch
cord assembly, QDC Plug or Receptacle to RJ45
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
SuperFly Datalink Connector Type
01 = Plug 882-00102 = Receptacle 882-002
Overall Length Length in Inches (12 inch minimum)Specifications
Q Operating temp.: -10 to +60°C Q Impedance: 100 ohms Q DWV: 500 Vrms unmated Q Current Rating: 1.5 A Q IR: 200 MΩ min.
SuperFly Datalink Construction Q Shell, backshell: aluminum alloy or SST Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommet, O-ring : fluorosilicone Q Bushing, retainer, spline: copper alloy,
electroless nickel plated
RJ45 Construction
Q Housing: polycarbonate, UL94V-0 Q Contacts: copper alloy, 50 microinches
gold in contact area Q Boot : thermoplastic, UL94V-0 Q EMI shield: 360°
Cable Construction Q 4 pair, Cat 6A, 100 ohm Q Conductors: 26 AWG 7/34 tinned copper Q Shield: foil, TC braid Q Jacket: low smoke zero halogen, black
SUPERFLYDATALINK
RJ45PLUG
3
6
1
2
5
4
7
8
8
7
6
5
4
3
2
1 BRN
WHT/BRN
BLU
WHT/BLU
ORN
WHT/ORNGRN
WHT/GRN
26 AWG
Commercial grade cable. Shielded. Cat 6A. LSZH jacket. Save assembly time and cost with pre-wired patch cords. One end is Series 882 SuperFly Datalink push-pull QDC connector. Other end is shielded RJ45 plug with snagless strain relief boot. Commercial grade 26 AWG stranded cable is RoHS, lead-free, halogen-free, PVC free. Data pairs have individual foil shields, overall shield is tinned copper braid.
SIZE AND WEIGHT SAVING
• <1/2 inch (12.7 mm.) diameter
• Push-pull quick-disconnect
LOWER INSTALLED COST
• Factory-terminated
• 100% tested
COMMERCIAL GRADE
• LSZH cable jacket
OVERALL LENGTH (INCHES)TOLERANCE: +1.80 (+45.7)/-0.0 IF LENGTH <= 60 (1524)
TOLERANCE +3%/-0 IF LENGTH > 60
RECEPTACLE CONNECTOR 882-002
MATING FACE OF PLUG
SHIELDED RJ45 PLUG
POSITION 1
8571-0009-X-XX-XXGLENAIR YYWW 06324
8571-0009-X-XX-XXGLENAIR YYWW 06324
1.50 (38.1) MAX
Ø .415(10.54)
.375 (9.53) HEX
MATING FACE OF RECEPTACLE
Ø .415(10.54)
PLUG CONNECTOR 882-001
CAT 6A ETHERNET CABLE
POLARIZATION KEY
PIN NUMBERS NOT MARKED
ON PART
123
45 6
7
81 2
3
456
7
8
POLARIZATION KEYWAY
2.00 (50.80) REF
2.00 (50.80) REF
IDENTIFICATION LABEL
Wiring Diagram
Specifications Q Operating temp.: -40° to +85°C Q Impedance: 100 ohms Q DWV: 150 Vrms unmated Q Current Rating: 1.5 A Q IR: 200 MΩ min.
SuperFly Datalink Construction Q Shell, backshell: aluminum alloy or SST Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommet, O-ring : fluorosilicone Q Bushing, retainer, spline: copper alloy,
electroless nickel plated
RJ45 Construction Q Contact housing: polycarbonate, UL94V-0 Q Contacts: copper alloy, 50 microinches
gold in contact area Q Connector housing : nickel-plated zinc
alloy
Cable Construction Q 4 pair, Cat 6A, 100 ohm, S/FTP, IAW SAE
AS6070/6 P/N 963-033-26 Q Conductors: 26 AWG, stranded, silver-plated Q Shield: Al/polyamide foil, silver plated braid Q Jacket: fluoropolymer, white
SUPERFLYDATALINK
RJ45PLUG
3
6
1
2
5
4
7
8
8
7
6
5
4
3
2
1 BRN
WHT/BRN
BLU
WHT/BLU
ORN
WHT/ORNGRN
WHT/GRN
26 AWG
Shielded. Cat 6A. Flight-grade cable. RJ45 modular plug. Save assembly time and cost with pre-wired patch cords. One end is Series 882 SuperFly Datalink push-pull QDC connector. Other end is shielded RJ45 modular plug. Flight grade cable meets AS6070/6. Fluoropolymer cable jacket, 26 AWG conductors. Data pairs have individual foil shields, overall shield is silver-plated copper braid.
How To OrderSample Part Number 8571-0010 -MT -02 -36
Product8571-0010 = SuperFly Datalink patch
cord assembly, QDC Plug or Receptacle to RJ45
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
SuperFly Datalink Connector Type
01 = Plug 882-001 Plug and receptacle use02 = Receptacle 882-002 cable P/N 963-033-26
Overall Length Length in Inches (12 inch minimum)
SIZE AND WEIGHT SAVING
• <1/2 inch (12.7 mm.) diameter
• Push-pull quick-disconnect
LOWER INSTALLED COST
• Factory-terminated
• 100% tested
FLIGHT GRADE CABLE
• AS6070 approved
8571-0010 QDC Patch Cord, SuperFly to RJ45, 10GbE, Flight
AEROSPACE GRADE CAT 6A ETHERNET CABLE 963-033-26
OVERALL LENGTH (INCHES)TOLERANCE: +1.80 (+45.7)/-0.0 IF LENGTH <= 60 (1524)
TOLERANCE +3%/-0 IF LENGTH > 60
RECEPTACLE CONNECTOR 882-002
MATING FACE OF PLUG
SHIELDED RJ45 PLUG
POSITION 1
8571-0010-XX-01-XXGLENAIR YYWW 06324
8571-0010-XX-02-XXGLENAIR YYWW 06324
1.50 (38.1) MAX
Ø .415(10.54)
.375 (9.53) HEX
MATING FACE OF RECEPTACLE
Ø .415(10.54)
2.00 (50.80) REF
2.00 (50.80) REFPLUG CONNECTOR 882-001
POLARIZATION KEY
PIN NUMBERS NOT MARKED
ON PART
123
45 6
7
81 2
3
456
7
8
POLARIZATION KEYWAY
IDENTIFICATION LABEL
2120 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito® W
hite
El O
chito
® Whi
te
882-003 ComponentsConnector is supplied unassembled. Assembly instructions are packaged with kit.
Backshell-Grommet Assembly
O-ring Bushing
Retainer Contacts
Inner Insulator and Spline
Outer Insulator
Shell- Coupling Nut Assembly
How To Order 882-003 SuperFly Datalink Plugs Wire Size
(AWG)
Cat 6A Cable Type
Cable Part No. Cable Dia.
Shell Material and FinishAluminum/
Electroless NickelAluminum/ Nickel-PTFE
Aluminum/Black Zinc-Nickel
Aluminum/ Gold
Stainless Steel/Nickel-PTFE
26 S/UTP 963-003-26 .220 (5.56) 882-003-M-01 882-003-MT-01 882-003-ZR-01 882-003-Z2-01 882-003-ZMT-0126 S/FTP 963-033-26 .220 (5.56) 882-003-M-02 882-003-MT-02 882-003-ZR-02 882-003-Z2-02 882-003-ZMT-0224 S/UTP 963-037-24 .260 (6.60) 882-003-M-03 882-003-MT-03 882-003-ZR-03 882-003-Z2-03 882-003-ZMT-0324 S/FTP 963-033-24 .260 (6.60) 882-003-M-04 882-003-MT-04 882-003-ZR-04 882-003-Z2-04 882-003-ZMT-04
882-003 Cable Plug, Threaded Coupling, 10GbE
10Gb Ethernet. Ultraminiature. High performance. 882-003 SuperFly Datalink Octaxial connectors are compatible with #24 and #26 AWG Category 6A Ethernet cable. Supplied as unassembled kit. Terminate wires to contacts with crimp tool. 882-003 plugs have a rotating coupling nut with M8.5 metric thread. Braided cable shield terminates to connector with supplied bushing. Mates to 882-004, 882-006, and 882-007.
Specifications
Q Operating temp.: -65° to +175°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
POLARIZATION KEY
PIN NO. DESIGNATION(NOT MARKED ON PART)
1.50 (38.1) MAX
.54 (13.7)
Ø .415(10.54)
Ø .227(5.76)
CABLE (REF)
12
3
4
5 6
7
8
.375 (9.53) HEX
M8.5 X 0.75-6H THD
Construction
Q Shell, coupling nut, backshell: aluminum alloy or stainless steel
Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommet: fluorosilicone Q O-ring: fluorosilicone Q Bushing, retainer, spline: copper alloy,
electroless nickel plated
SIZE AND WEIGHT SAVING
• Smallest 10GbE aerospace-grade connector
• Integral strain relief and cable seal
• High density contacts
FAST ASSEMBLY
• Crimp contacts
• Easy shield termination
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
• Temperature extremes
Contact Crimp Tools
Hand Crimp Tool Positioner for Hand Crimp Tool
809-015(M22520/2-01)
859-101(K1906)
882-006 ComponentsConnector is supplied unassembled. Assembly instructions are packaged with kit.
Backshell-Grommet Assembly
O-ring Bushing
Retainer Contacts
Inner Insulator and Spline
Outer Insulator
Shell Assembly
How To Order 882-006 SuperFly Datalink Cable Receptacles
Wire Size
(AWG)
Cat 6A Cable Type
Cable Part No. Cable Dia.
Shell Material and FinishAluminum/
Electroless NickelAluminum/ Nickel-PTFE
Aluminum/ Black Zinc-Nickel
Aluminum/ Gold
Stainless Steel/Nickel-PTFE
26 S/UTP 963-003-26 .220 (5.56) 882-006-M-01 882-006-MT-01 882-006-ZR-01 882-006-Z2-01 882-006-ZMT-0126 S/FTP 963-033-26 .220 (5.56) 882-006-M-02 882-006-MT-02 882-006-ZR-02 882-006-Z2-02 882-006-ZMT-0224 S/UTP 963-037-24 .260 (6.60) 882-006-M-03 882-006-MT-03 882-006-ZR-03 882-006-Z2-03 882-006-ZMT-0324 S/FTP 963-033-24 .260 (6.60) 882-006-M-04 882-006-MT-04 882-006-ZR-04 882-006-Z2-04 882-006-ZMT-04
882-006 Cable Receptacle, Threaded Coupling, 10GbE
10GbE. Ultraminiature. High performance. 882-006 SuperFly Datalink connectors have eight female contacts. Compatible with #24 and #26 AWG Category 6A Ethernet cable. Supplied as unassembled kit. Terminate wires to contacts with crimp tool. M8.5 metric mating thread. Internal O-ring seals to mating plug. Gold-plated interface spring assures low shell-to-shell resistance. Braided cable shield terminates to connector with supplied bushing. Mates to 882-003 plug.
Specifications
Q Operating temp.: -65° to +175°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
Construction
Q Shell, backshell: aluminum alloy or stainless steel
Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommet: fluorosilicone Q O-rings: fluorosilicone Q EMI spring: stainless steel, gold plated Q Bushing, retainer, spline: copper alloy,
electroless nickel plated
SIZE AND WEIGHT SAVING
• Smallest 10GbE aerospace-grade connector
• Integral strain relief and cable seal
• High density contacts
FAST ASSEMBLY
• Crimp contacts
• Easy shield termination
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
• Temperature extremes
Contact Crimp Tools
Hand Crimp Tool Positioner for Hand Crimp Tool
809-015(M22520/2-01)
859-101(K1906)
1.50 (38.1) MAX.535 (13.59)
CABLE (REF)
.375 (9.53) HEX
O-RING M8.5 X 0.75-6G THD
POLARIZATION KEYWAY
PIN NO. DESIGNATION(NOT MARKED ON PART)
Ø .415(10.54)
1 2
3
4
56
7
8
2322 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito® W
hite
El O
chito
® Whi
te
882-004 PC Tail Panel Receptacle, Threaded Coupling, 10GbE
10GbE. Ultraminiature. Rear panel jam-nut mount. PCB terminals.882-004 SuperFly Datalink receptacles have eight socket contacts. Attach to .100“ (2.54 mm) maximum thickness panel with spanner nut. PC tail contacts are gold plated or solder dipped in 63/37 tin-lead. Contacts are epoxy-sealed and are non-removable. Gold-plated EMI interface spring, fluorosilicone O-rings for panel sealing and for interface sealing. Mates to 882-003 plug.
SIZE AND WEIGHT SAVING
• Smallest 10Gb Ethernet aerospace-grade connector
FAST ASSEMBLY
• Pre-tinned PC tail contacts
• Epoxy-sealed terminals
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
Recommended PC Board Layout
Recommended Panel Cutout
.300 ± .003(7.62 ± 0.08))
Ø .344 ± .003(8.74 ± 0.08)
R .015 (0.38) MAX4X
How To OrderSample Part Number 882-004 - M G -.125
Product 882-004 = SuperFly Datalink Panel Mount PC Tail Receptacle
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
PC Tail Finish S = Solder dip, 63/37 tin-lead G = Gold
PC Tail Length .080 = .080” (2.03 mm.) .125 = .125” (3.18 mm.).175 = .175” (4.45 mm.) .200 = 200” (5.08 mm.)
Specifications Q Operating temp.: -65° to +175°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
Construction Q Shell, jam-nut: aluminum alloy or SST Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q O-rings: fluorosilicone Q EMI spring: stainless steel, gold plated Q Spline: copper alloy, electroless nickel
plated Q Potting: epoxy
Spanner Nut Tightening ToolNickel-plated tool steel,¼" sq. drive
13 - 18 in.-lbs. recommended torque
1.00 (25.4)
600-202-E
PART NUMBER DEVELOPMENT
POTTINGCOMPOUND
EMI SPRING
SPANNER NUT
8X Ø.015(0.38)
.235 (5.97)
.100 (2.5) MAXPANEL THICKNESS
"L" +.015/-.010(+0.38/-0.25)
PC TAILS (8 PLCS)
.690 (17.53)
.598 (15.19)
O-RING
.020(0.51)
Ø.451(11.46)
PORALIZATION KEYWAY
2
3
45
6
7
8
1
SIZE AND WEIGHT SAVING • Smallest 10Gb Ethernet aerospace-
grade connector
FAST ASSEMBLY • Pre-tinned PC tail contacts
• Epoxy-sealed terminals
HARSH ENVIRONMENT • EMI protection
• Water ingress
• Shock and vibration
882-007 90° PC Tail Panel Receptacle, Threaded Coupling, 10GbE
10GbE. Ultraminiature. Rear panel jam-nut mount. 90° PCB terminals.882-007 SuperFly Datalink receptacles have eight socket contacts. Attach to .100“ (2.54 mm) maximum thickness panel with spanner nut. PC tail contacts are gold plated or solder dipped in 63/37 tin-lead. Contacts are epoxy-sealed and are non-removable. Gold-plated EMI interface spring, fluorosilicone O-rings for panel sealing and for interface sealing. Mates to 882-003 plug.
.016/.014(0.41/0.36)
.478(12.14)MAX
.150(3.81)MIN
PC TAIL LENGTH.200 (5.08)
O-RINGO-RING
.605 (15.37)MAX
SPANNER NUTEMI SPRING
.100 (2.54)MAX PANEL THICKNESS
45°POLARIZATION KEYWAY
PIN NO. DESIGNATION(NOT MARKED ON PART)
1
2
3
45
6
78
Ø .016/.014(0.41/0.36) 8X
.300(7.62)
.535(13.58)MAX
4X
.875 (22.23) MAX
.032/.030(0.81/0.76)
2X 2-56 UNC-2B THD
.140 (3.56)
Ø .002 M
M8.5 X 0.75-6gTHD 2X
RED STRIPE FULL MATE INDICATOR
How To Order 882-007 Push-Pull Receptacles
Shell Matl/ FinishSalt
Spray Hours
PC Tail Option
Gold Plated Solder Dipped63/37 Sn/Pb
Al/ Electroless Nickel 48 882-007-MG-.200 882-007-MS-.200Al/ Nickel-PTFE 500 882-007-MTG-.200 882-007-MTS-.200Al/ Black Zinc-Nickel 500 882-007-ZRG-.200 882-007-ZRS-.200Al/ Gold 48 882-007-Z2G-.200 882-007-Z2S-.200SST/ Nickel-PTFE 500 882-007-ZMTG-.200 882-007-ZMTS-.200
PC Board Layout
Panel Cutout
.300 ± .003(7.62 ± 0.08))
Ø .344 ± .003(8.74 ± 0.08)
R .015 (0.38) MAX4X
Spanner Nut Tightening ToolNickel-plated tool steel,¼" sq. drive
13 - 18 in.-lbs. recommended torque
1.00 (25.4)
600-202-E
Specifications Q Operating temp.: -65° to +175°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
Construction Q Shell, jam-nut: aluminum alloy or SST Q Insulators and tray: high-grade rigid
dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q O-rings: fluorosilicone Q EMI spring: stainless steel, gold plated Q Spline: copper alloy, nickel plated Q Potting: epoxy
Connector side of PCBSee AN0002 for optimal perfomance
8X Ø .020 (0.51) MIN
Ø .247(6.27) .300
(7.62)
.125 (3.17)
.046 (1.17)
Ø .002 M
M .510 (12.95)
4X Ø .045 (1.14)
minØ .005
2x Ø .097 (2.46).091 (2.31)
1 2
34
567
8
RECOMMENDED PCB LAYOUTCONNECTOR SIDE
SEE AN0002 FOR OPTIMAL PERFORMANCE(MAINTAIN Ø.036 ON Ø.269 FOR GROUND PINS)
8X Ø.020 (0.51)
AØ.002 (0.05)
4X Ø.036 (0.91)
AØ.003 (.08)
.046 (1.17)
.125 (3.17)
Ø.269 (6.83)
2524 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito® W
hite
El O
chito
® Whi
te
8571-0012 Threaded Coupling Cordset, Single-Ended, 10GbE
Wiring Diagram
Lower installed cost. 100% tested. Save assembly time and cost with pre-wired SuperFly Datalink “White” assemblies for 10Gb Ethernet. These single-ended Octaxial threaded coupling cordsets are terminated to Category 6A aerospace-grade shielded cable. Cable options include unshielded or shielded data pairs, 24 AWG or 26 AWG stranded conductors. Series 882 connectors are designed for demanding aerospace environments.
How To OrderSample Part Number 8571-0012 -MT -06 -60
Product8571-0012 = Pre-wired SuperFly
Datalink assembly, Threaded, Single-Ended
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
Order CodeConnector Type, Wire Size and Cable Type
01 = Plug, #26 AWG, S/UTP* P/N 963-003-2602 = Receptacle, #26 AWG, S/UTP* P/N 963-003-2603 = Plug, #26 AWG, S/FTP** P/N 963-033-2604 = Receptacle, #26 AWG, S/FTP** P/N 963-033-2605 = Plug, #24 AWG, S/UTP* P/N 963-037-2406 = Receptacle, #24 AWG, S/UTP* P/N 963-037-2407 = Plug, #24 AWG, S/FTP** P/N 963-033-2408 = Receptacle, #24 AWG, S/FTP** P/N 963-033-24*S/UTP cable has overall braid shield**S/FTP cable has overall braid shield plus foil wrap on pairs
Overall Length Length in Inches (12 inch minimum)
Specifications Q Operating temp.: -65° to +175°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 200 MΩ min.
Q Durability: 500 mating cycles
Construction
Q Shell, coupling nut, backshell: aluminum alloy or stainless steel
Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommets: fluorosilicone Q O-rings: fluorosilicone Q Bushing, retainer, spline: copper alloy,
electroless nickel plated Q Cable: aerospace-grade fluoropolymer
per AS6070
SIZE AND WEIGHT SAVING
• Ultra small .415” (10.5 mm.) diameter coupling nut
• Integral backshell and cable seal
LOWER INSTALLED COST
• Factory-terminated
• 100% tested
HARSH ENVIRONMENT
• Aerospace grade Category 6A cable
• Shock, vibration, moisture
8
7
6
5
4
3
2
1 BRN
WHT/BRNBLU
WHT/BLU
ORN
WHT/ORN
GRN
WHT/GRN
OVERALL LENGTH (INCHES)TOLERANCE: +1.80 (+45.7)/-0.0 IF LENGTH <= 60 (1524)
TOLERANCE +3%/-0 IF LENGTH > 60
RECEPTACLE CONNECTOR882-006
IDENTIFICATION LABEL
8571-0012-XX-XX-XXGLENAIR YYWW 06324
8571-0012-XX-XX-XXGLENAIR YYWW 06324
1.50 (38.1) MAX
Ø .415(10.54)
.375 (9.53) HEX
Ø .415(10.54)
PLUG CONNECTOR882-003
AEROSPACE GRADE CAT 6A ETHERNET CABLE
POLARIZATION KEY
PIN NUMBERS NOT MARKED ON PART
123
45 6
7
8
1 23
456
7
8
2.00 (50.80) REF
2.00 (50.80) REF
8571-0013 Threaded Coupling Cordset, Plug-to-Receptacle, 10GbE
Wiring Diagram How To OrderSample Part Number 8571-0013 -MT -03 -72
Product8571-0013 = Pre-wired SuperFly
Datalink assembly, threaded coupling, plug to receptacle
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
Cable Type
01 = Category 6A, #26 AWG, S/UTP* P/N 963-003-2602 = Category 6A, #26 AWG, S/FTP** P/N 963-033-2603 = Category 6A, #24 AWG, S/UTP* P/N 963-037-2404 = Category 6A, #24 AWG, S/FTP** P/N 963-033-24 *S/UTP cable has overall braid shield**S/FTP cable has overall braid shield plus foil wrap on pairs
Overall Length Length in Inches (12 inch minimum)
Specifications Q Operating temp.: -65° to +175°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 200 MΩ minimum
Q Durability: 500 mating cycles
Construction
Q Shell, coupling nut, backshell: aluminum alloy or stainless steel
Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommets: fluorosilicone Q O-rings: fluorosilicone Q Bushing, retainer, spline: copper alloy,
electroless nickel plated Q Cable: aerospace-grade fluoropolymer
per AS6070
PLUG RECEPTACLE
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1 BRN
WHT/BRN
BLU
WHT/BLU
ORN
WHT/ORNGRN
WHT/GRN
Lower installed cost. 100% tested. 10GbE. Save assembly time and cost with pre-wired SuperFly Datalink “White” assemblies for 10G Ethernet. These back-to-back Octaxial cordsets are terminated to Cat 6A aerospace-grade shielded cable. Two cable constructions are available: S/UTP (unshielded pairs with overall braid shield) or S/FTP (foil shielded pairs with overall braid). 24 AWG or 26 AWG stranded conductors. Series 882 connectors are designed for demanding aerospace environments.
Ø .415(10.54)
1 23
456
7
8
OVERALL LENGTH (INCHES)TOLERANCE: +1.80 (+45.7)/-0.0 IF LENGTH <= 60 (1524)
TOLERANCE +3%/-0 IF LENGTH > 60
RECEPTACLE CONNECTOR882-006
IDENTIFICATION LABEL
8571-0013-X-XX-XXGLENAIR YYWW 06234
1.50 (38.1) MAX 1.50 (38.1) MAX.375 (9.53) HEX .375 (9.53) HEX
PLUG CONNECTOR882-003
AEROSPACE GRADE CAT 6AETHERNET CABLE
PLUG MATING FACE RECEPTACLE MATING FACE
POLARIZATION KEYWAY
PIN NUMBERS DO NOT APPEAR ON CONNECTOR
Ø .415(10.54)
POLARIZATION KEY
123
45 6
7
8
2.00 (50.80) REF
SIZE AND WEIGHT SAVING
• Ultra small .415” (10.5 mm.) diameter coupling nut
• Integral backshell and cable seal
LOWER INSTALLED COST
• Factory-terminated
• 100% tested
HARSH ENVIRONMENT
• Aerospace grade Category 6A cable
• Shock, vibration, moisture
2726 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito® W
hite
El O
chito
® Whi
te
8571-0015 Threaded Coupling Patch Cord, SuperFly to RJ45, Ground
Wiring Diagram How To OrderSample Part Number 8571-0015 -Z2 -01 -48
Product8571-0015 = SuperFly Datalink patch
cord assembly, Threaded Plug or Receptacle to RJ45
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
SuperFly Datalink Connector Type
01 = Plug 882-00302 = Receptacle 882-006
Overall Length Length in Inches (12 inch minimum)Specifications
Q Operating temp.: -10 to +60°C Q Impedance: 100 ohms Q DWV: 500 Vrms unmated Q Current Rating: 1.5 A Q IR: 200 MΩ min.
SuperFly Datalink Construction Q Shell, backshell, coupling nut: aluminum
alloy or SST Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommet, O-ring : fluorosilicone Q Bushing, retainer, spline: copper alloy,
electroless nickel plated
RJ45 Construction Q Housing: polycarbonate, UL94V-0 Q Contacts: copper alloy, 50 microinches
gold in contact area Q Boot : thermoplastic, UL94V-0 Q EMI shield: 360°
Cable Construction Q 4 pair, Cat 6A, 100 ohm Q Conductors: 26 AWG 7/34 tinned copper Q Shield: Al/polyester foil, TC braid Q Jacket: low smoke zero halogen, black
SUPERFLYDATALINK
RJ45PLUG
3
6
1
2
5
4
7
8
8
7
6
5
4
3
2
1 BRN
WHT/BRN
BLU
WHT/BLU
ORN
WHT/ORNGRN
WHT/GRN
26 AWG
Commercial grade cable. Shielded. Cat 6A. LSZH jacket. RJ45 plug. Save assembly time and cost with pre-wired patch cords. One end is Series 882 SuperFly Datalink threaded coupling Octaxial connector. Other end is shielded RJ45 plug with snagless strain relief boot. Commercial grade 26 AWG stranded cable is RoHS, lead-free, halogen-free, PVC free. Data pairs have individual foil shields, overall shield is tinned copper braid.
SIZE AND WEIGHT SAVING
• Ultra small .415" (10.5 mm.) diameter coupling nut
• Integral backshell and cable seal
LOWER INSTALLED COST
• Factory-terminated
• 100% tested
COMMERCIAL GRADE
• Low smoke zero halogen jacket
OVERALL LENGTH (INCHES)TOLERANCE: +1.80 (+45.7)/-0.0 IF LENGTH <= 60 (1524)
TOLERANCE +3%/-0 IF LENGTH > 60
RECEPTACLE CONNECTOR 882-006MATING FACE OF PLUG
SHIELDED RJ45 PLUG POSITION 1
8571-0015-XX-XX-XXGLENAIR YYWW 06324
8571-0015-XX-XX-XXGLENAIR YYWW 06324
1.50 (38.1) MAX
.375 (9.53) HEX
MATING FACE OF RECEPTACLE
2.00 (50.80) REF
2.00 (50.80) REF
PLUG CONNECTOR 882-003
COMMERCIAL GRADE CAT 6A ETHERNET CABLE
PIN NUMBERS NOT MARKED
ON PART
Ø .415(10.54)
Ø .415(10.54)
POLARIZATION KEY
123
45 6
7
8
POLARIZATION KEYWAY
1 23
456
7
8
IDENTIFICATION LABEL
Wiring Diagram
Specifications Q Operating temp.: -40° to +85°C Q Impedance: 100 ohms Q DWV: 150 Vrms unmated Q Current Rating: 1.5 A Q IR: 200 MΩ min.
SuperFly Datalink Construction Q Shell, backshell: aluminum alloy or SST Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommet, O-ring : fluorosilicone Q Bushing, retainer, spline: copper alloy,
electroless nickel plated
RJ45 Construction Q Contact housing: polycarbonate, UL94V-0 Q Contacts: copper alloy, 50 microinches
gold in contact area Q Connector housing : nickel-plated zinc
alloy
Cable Construction Q 4 pair, Cat 6, 100 ohm, S/FTP, IAW SAE
AS6070/6 P/N 963-033-26 Q Conductors: 26 AWG, stranded, silver-plated Q Shield: Al/polyamide foil, silver plated braid Q Jacket: fluoropolymer, white
SUPERFLYDATALINK
RJ45PLUG
3
6
1
2
5
4
7
8
8
7
6
5
4
3
2
1 BRN
WHT/BRN
BLU
WHT/BLU
ORN
WHT/ORNGRN
WHT/GRN
26 AWG
Flight-grade cable. Shielded. Category 6A. RJ45 modular plug. Save assembly time and cost with pre-wired patch cords. One end is Series 882 SuperFly Datalink threaded coupling Octaxial connector. Other end is shielded RJ45 modular plug. Flight grade cable meets AS6070/6. Fluoropolymer cable jacket, 26 AWG conductors. Data pairs have individual foil shields, overall shield is silver-plated copper braid.
How To OrderSample Part Number 8571-0016 -M -01 -24
Product8571-0016 = SuperFly Datalink patch
cord assembly, threaded coupling plug or receptacle to RJ45
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
SuperFly Datalink Connector Type
01 = Plug 882-00302 = Receptacle 882-006
Overall Length Length in Inches (12 inch minimum)
SIZE AND WEIGHT SAVING
• Ultra small .415" (10.5 mm.) diameter coupling nut
• Integral backshell and cable seal
LOWER INSTALLED COST
• Factory-terminated
• 100% tested
FLIGHT GRADE CABLE
• AS6070/6 qualified cable
8571-0016 Threaded Coupling Patch Cord, SuperFly to RJ45, Flight
OVERALL LENGTH (INCHES)TOLERANCE: +1.80 (+45.7)/-0.0 IF LENGTH <= 60 (1524)
TOLERANCE +3%/-0 IF LENGTH > 60
RECEPTACLE CONNECTOR 882-006MATING FACE OF PLUG
SHIELDED RJ45 PLUG
POSITION 1
8571-0016-X-XX-XXGLENAIR YYWW 06324
8571-0016-X-XX-XXGLENAIR YYWW 06324
1.50 (38.1) MAX
.375 (9.53) HEX
MATING FACE OF RECEPTACLE
2.00 (50.80) REF
2.00 (50.80) REF PLUG CONNECTOR 882-003
PIN NUMBERS NOT MARKED
ON PART
Ø .415(10.54)
Ø .415(10.54)
POLARIZATION KEY
123
45 6
7
8
POLARIZATION KEYWAY
1 23
456
7
8
AEROSPACE GRADE CAT 6A ETHERNET CABLE
963-033-26
IDENTIFICATION LABEL
2928 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito® W
hite
El O
chito
® Whi
te
24 AWG S/FTP Cat 6A Cable
Glenair Part Number 963-033-24
Manufacturer Part Number RCN9034-24Manufacturer Gore
S/FTP 24 AWG cable has an individual foil shield around each data pair for reduced crosstalk and attenuation. This high data rate Ethernet cable features a unique cable jacket material and high-density construction that significantly reduces weight and diameter. Meets TIA568C.2 Category 6A requirements up to 80 meters. Qualified to SAE AS6070/5 and /6
Construction Details
CONDUCTOR24 AWG 19X36 SILVER PLATED COPPER ALLOY
WIRE INSULATIONePTFE / PTFE .060 (1.52)
OVERALL SHIELDAWG 40 SILVER-PLATED COPPER92% MIN COVERAGE
PAIR SHIELDALUMINIZED POLYIMIDE(ALUMINUM OUT)
FILLERFEP/ePTFE .060 (1.52) DIA.JACKETENGINEERED FLUOROPOLYMER EF100 WHITE LASER-MARKABLE 0.004 (0.10) WALL 0.260 (6.60) MAX DIAMETER
Color CodePair #1 Blue, White/Blue · Pair #2 Orange, White/Orange · Pair #3 Green, White/Green · Pair #4 Brown, White/Brown
SpecificationsImpedance (ohms) 100 (+10 -5)Temperature Rating -65° to +200°CWeight (lbs/1000 ft.)(max.) 42 Capacitance (pF/ft) 12.5Time Delay (ns/ft) 1.24Minimum Bend Radius 0.54 (13.72)
Maximum Attenuation at 80m Length
Frequency dB10 MHz 5.9
100 MHz 19.1250 MHz 31.1500 MHz 45.3
NEXT (minimum)
Frequency dB1 MHz 74.3
10 MHz 59.2100 MHz 52.3250 MHz 47.9500 MHz 42.2
963-033 Cat 6A S/FTP Cable, Aerospace Grade
26 AWG S/FTP Cat 6A Cable
Glenair Part Number 963-033-26
Manufacturer Part Number RCN9047-26Manufacturer GoreS/FTP 26 AWG cable has an individual foil shield around each data pair for reduced crosstalk and attenuation. This high data rate Ethernet cable features a unique cable jacket material and high-density construction that significantly reduces weight and diameter. Meets TIA568C.2 Category 6A requirement up to 65 meters. Qualified to SAE AS6070/5 and /6.
Construction Details
CONDUCTOR26 AWG 19X38 SILVER PLATED HIGH STRENGTH COPPER ALLOY
WIRE INSULATIONePTFE / PTFE .050 (1.27)
OVERALL SHIELDAWG 40 SILVER-PLATED COPPER92% MIN COVERAGE
PAIR SHIELDALUMINIZED POLYIMIDE(ALUMINUM OUT)
FILLERFEP/ePTFE.036 (0.94) DIA.JACKETENGINEERED FLUOROPOLYMER EF100 WHITE LASER-MARKABLE 0.004 (0.10) WALL 0.220 (5.59) MAX DIAMETER
Color CodePair #1 Blue, White/Blue · Pair #2 Orange, White/Orange · Pair #3 Green, White/Green · Pair #4 Brown, White/Brown
SpecificationsImpedance (ohms) 100 (+10 -5)Temperature Rating -65° to +200°CWeight (lbs/1000 ft.) (max.) 32.0 Capacitance (pF/ft) 12.5Time Delay (ns/ft) 1.24Minimum Bend Radius 0.44 (10.2)
Maximum Attenuation at 65m Length
Frequency dB10 MHz 5.9
100 MHz 19.1250 MHz 31.1500 MHz 45.3
NEXT (minimum)
Frequency dB1 MHz 74.3
10 MHz 59.2100 MHz 52.3250 MHz 47.9500 MHz 42.2
26 AWG S/UTP Cat 6A Cable
Glenair Part Number 963-003-26
Manufacturer Part Number E6A3826Manufacturer PICS/UTP 26 AWG cable is small, lightweight and flexible. Twisted pairs are separated by a fluoropolymer spline for reduced crosstalk and attenuation. This 200°C cable is Skydrol resistant, RoHS compliant and meets FAA FAR Parts 23 and 25 Appendix F flammability requirements. Rugged, laser-markable PTFE jacket withstands abrasion and chemicals. Meets TIA568C.2 Category 6A performance up to 188 feet.
Construction Details
CONDUCTOR26 AWG 19X38 SILVER PLATED HIGH STRENGTH COPPER ALLOY
FOUR TWISTED PAIRSPFA WIRE INSULATION
FLUOROPOLYMER TAPE
SPLINEFLUOROPOLYMER
SILVER-PLATED COPPER BRAID80% MIN. COVERAGE
JACKETPTFE WHITE LASER-MARKABLE 0.22 (5.59)
Color CodePair #1 Blue, White/Blue · Pair #2 Orange, White/Orange · Pair #3 Green, White/Green · Pair #4 Brown, White/Brown
SpecificationsImpedance (ohms) 100 ± 10Temperature Rating -55° to +200°CWeight (lbs/100 ft.) 3.05 Capacitance (pF/ft) 14.5Minimum Bend Radius 0.66 (16.76)Velocity of Propagation % 70Dielectric Voltage Rating (kV rms) 1.5DC Resistance, Max (ohms/1000 ft.) 44.8Max Distance in Feet 188
963-037-24 & 963-003-26 Cat 6A S/UTP Cable, Aerospace Grade
24 AWG S/UTP Cat 6A Cable
Glenair Part Number 963-037-24
Manufacturer Part Number E6A3824Manufacturer PIC
S/UTP 24 AWG cable is specially designed for airborne 10 Gigabit Ethernet applications. Twisted pairs are separated by a fluoropolymer spline for reduced crosstalk and attenuation. This 200°C rated cable is Skydrol resistant, RoHS compliant and meets FAA FAR Parts 23 and 25 Appendix F flammability requirements. Laser-markable white PTFE jacket withstands abrasion and chemicals. Meets TIA568C.2 Category 6A performance up to 246 feet.
Construction Details
CONDUCTOR24 AWG 7X32 SILVER PLATED COPPER
FOUR TWISTED PAIRSPFA WIRE INSULATION
PTFE TAPE
FEP SPLINE
SILVER-PLATED COPPER BRAID80% MIN. COVERAGE
FOIL SHIELD100% COVERAGE
JACKETPTFE WHITE LASER-MARKABLE 0.26 (6.6) NOMINAL
Color CodePair #1 Blue, White/Blue · Pair #2 Orange, White/Orange · Pair #3 Green, White/Green · Pair #4 Brown, White/Brown
SpecificationsImpedance (ohms) 100 ± 15Temperature Rating -55° to +200°CWeight (lbs/100 ft.) 4.5 Capacitance (pF/ft) 14.5Minimum Bend Radius .78 (19.81)Velocity of Propagation % 70Dielectric Voltage Rating (kV rms) 1.5DC Resistance, Max (ohms/1000 ft.) 28.5Max Distance in Feet (m) 246 (75)
Freq.(MHz)
Attenuation dB/100ft. nom./max.
NEXT dB min.
SRLdB min.
10 2.3/2.6 59.3 25.0
100 7.0/8.4 44.3 19.0
250 11.4/13.7 38.3 15.6
500 16.5/20.0 33.8 13.0
Freq.(MHz)
Attenuation dB/100ft. max.
NEXT dB min.
SRLdB min.
10 3.7 59.3 25.0
100 11.2 44.3 20.1
250 17.4 38.3 15.2
500 24.0 33.8 15.2
3130 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito®
Blue
El O
chito
® Bl
ue
882-009 Cable Plug, Push-Pull QDC Coupling, USB 3.0
SuperSpeed USB. Ultraminiature. High performance. 882-009 SuperFly Datalink connectors have eight pin contacts. Compatible with aerospace-grade 90 ohm SuperSpeed USB cable. Supplied as unassembled kit. Terminate wires to contacts with crimp tool. 882-009 plugs feature push-pull mating and demating. Braided cable shield terminates to connector with supplied bushing. Mates to 882-008, 882-010 and 882-013 receptacles.
Construction Q Shell, backshell: aluminum alloy or
stainless steel Q Insulators: low dielectric thermoplastic Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommet: fluorosilicone Q O-ring: fluorosilicone Q Bushing, retainer: copper alloy,
electroless nickel plated
Contact Crimp Tools
Hand Crimp Tool Positioner for Hand Crimp Tool
809-015(M22520/2-01)
859-101(K1906)
1.50 (38.1) MAX
CABLE (REF)
Ø .227(5.76)
POLARIZATION KEY
PIN NO. DESIGNATION(NOT MARKED ON PART)
Ø .415(10.54)
12
3
4
5 6
7
8
.375 (9.53) HEX
882-009 ComponentsConnector is supplied unassembled. Assembly instructions are packaged with kit.
Shell
Backshell-Grommet Assembly
O-ring Bushing
Retainer Contacts
Inner Insulator
Outer Insulator
SIZE AND WEIGHT SAVING
• .415 inch (10.5 mm.) diameter
• Integral strain relief and cable seal
• High density contacts
HIGH SPEED
• 5 Gbps
• Low-dielectric material
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
• Temperature extremes
• Corrosion resistance
How To Order 882-009 SuperFly Datalink Plugs for USB 3.0
Cable Type Cable Part No.
Cable Dia.
Shell Material and FinishAluminum/
Electroless NickelAluminum/ Nickel-PTFE
Aluminum/ Black Zinc-Nickel
Aluminum/ Gold
Stainless Steel/Nickel-PTFE
USB 3.0, Aerospace-Grade Fluoropolymer Jacket, -65°
to +200°C963-110 .225
(5.72) 882-009-M-01 882-009-MT-01 882-009-ZR-01 882-009-Z2-01 882-009-ZMT-01
USB 3.0, Commercial-Grade PVC Jacket,0 to +80°C
963-118 .220(5.56) 882-009-M-02 882-009-MT-02 882-009-ZR-02 882-009-Z2-02 882-009-ZMT-02
Specifications Q Operating temp.: -65° to +125°C (0 to
+80°C for commercial-grade cable)
Q Impedance: 90 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
882-010 Cable Receptacle, Push-Pull QDC Coupling, USB 3.0
Specifications Q Operating temp.: -65° to +125°C (0 To
+80°C for commercial-grade cable)
Q Impedance: 90 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
Construction Q Shell, backshell: aluminum alloy or
stainless steel Q Insulators: low dielectric thermoplastic Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommet: fluorosilicone Q O-rings: fluorosilicone Q EMI spring: stainless steel, gold plated Q Bushing, retainer: copper alloy,
electroless nickel plated
Contact Crimp Tools
Hand Crimp Tool Positioner for Hand Crimp Tool
809-015(M22520/2-01)
859-101(K1906)
1.50 (38.1) MAX
CABLE (REF)
.375 (9.53) HEXPOLARIZATION
KEYWAY
PIN NO. DESIGNATION(NOT MARKED ON PART)
Ø .415(10.54)
1 2
3
4
56
7
8
882-010 ComponentsConnector is supplied unassembled. Assembly instructions are packaged with kit.
Shell Assembly
Backshell-Grommet Assembly
O-ring Bushing
Retainer Contacts
Inner Insulator and Spline
Outer Insulator
SuperSpeed USB. Ultraminiature. High performance. 882-010 SuperFly Datalink connectors have eight socket contacts. Compatible with aerospace-grade 90 ohm SuperSpeed USB cable. Supplied as unassembled kit. Terminate wires to contacts with crimp tool (purchased separately). M8.5 metric mating thread. Internal O-ring and gold-plated EMI spring. Braided cable shield terminates to connector with supplied bushing. Mates to 882-009, 882-018, and 882-033 plugs.
SIZE AND WEIGHT SAVING
• .415 inch (10.5 mm.) diameter
• Integral strain relief and cable seal
• High density contacts
HIGH SPEED
• 5 Gbps
• Low-dielectric material
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
• Temperature extremes
• Corrosion resistance
How To Order 882-010 SuperFly Datalink Plugs for USB 3.0
Cable Type Cable Part No.
Cable Dia.
Shell Material and FinishAluminum/
Electroless NickelAluminum/ Nickel-PTFE
Aluminum/BlackZinc-Nickel
Aluminum/ Gold
Stainless Steel/Nickel-PTFE
USB 3.0, Aerospace-Grade Fluoropolymer Jacket, -65°
to +200° C963-110 .225
(5.72) 882-010-M-01 882-010-MT-01 882-010-ZR-01 882-010-Z2-01 882-010-ZMT-01
USB 3.0, Commercial-grade PVC Jacket,0 to +80° C
963-118 .220(5.56) 882-010-M-02 882-010-MT-02 882-010-ZR-02 882-010-Z2-02 882-010-ZMT-02
3332 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito®
Blue
El O
chito
® Bl
ue
SUPERSPEED
• 5 Gbps
• Low-dielectric insulators
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
10GbE. Ultraminiature. Rear panel jam-nut mount. PCB terminals.882-005 receptacles have eight pin contacts. Attach to .100" (2.54 mm) maximum thickness panel with spanner nut. PC tail contacts are gold plated or solder dipped in 63/37 tin-lead. Contacts are epoxy-sealed and are non-removable. Gold-plated EMI interface spring, fluorosilicone O-rings for panel sealing and for inter face sealing. Mates to 882-010, 882-013 and 882-015 connectors.
Recommended PC Board Layout
RECOMMENDED PCB LAYOUTCONNECTOR SIDE
SEE AN0002 FOR OPTIMAL PERFORMANCE(MAINTAIN Ø.036 ON Ø.269 FOR GROUND PINS)
8X Ø.020 (0.51)
AØ.002 (0.05)
4X Ø.036 (0.91)
AØ.003 (.08)
.046 (1.17)
.125 (3.17)
Ø.269 (6.83)
Recommended Panel Cutout
.300 ± .003(7.62 ± 0.08))
Ø .344 ± .003(8.74 ± 0.08)
R .015 (0.38) MAX4X
How To OrderSample Part Number 882-018 -M G -.125
Product 882-018 = SuperFly Datalink Panel Mount PC Tail Plug, Push-Pull
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
PC Tail Finish S = Solder dip, 63/37 tin-lead G = Gold
PC Tail Length .080 = .080 in. (2.03 mm.) .125 = .125 in. (3.18 mm.).175 = .175 in. (4.45 mm.) .200 = .200 in. (5.08 mm.)
Specifications Q Operating temp.: -65° to +175°C
Q Impedance: 90 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min at 500 VAC.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
Construction
Q Shell, jam-nut: aluminum alloy or SST Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q O-rings: fluorosilicone Q EMI spring: stainless steel, gold plated Q Potting: epoxy
Spanner Nut Tightening ToolNickel-plated tool steel,¼" sq. drive
13 - 18 in.-lbs. recommended torque
1.00 (25.4)
600-202-E
882-018 PCB Plug, Push-Pull QDC Coupling, USB 3.0
8
7
65
4
3
2 1
KEYPOLARIZATION
O-RINGSPANNER NUT
4X Ø.030
"L"
8X Ø.015
Ø.455 MAX
.100 (2.54) MAXPANEL THICKNESS
.395 (10.03)
MAX
MAX .690 (17.53)
882-013 PC Tail Panel Receptacle, Push-Pull Coupling, USB 3.0
SuperSpeed USB. Ultraminiature. Rear panel mount. PCB terminals.882-013 SuperFly Datalink receptacles have eight socket contacts. Attach to .100“ (2.54 mm) maximum thickness panel with spanner nut. PC tail contacts are gold plated or solder dipped in 63/37 tin-lead. Contacts are epoxy-sealed and are non-removable. Gold-plated EMI interface spring, fluorosilicone O-rings for panel sealing and for interface sealing. Mates to 882-009, 882-018 and 882-033 plug.
Recommended PC Board Layout
RECOMMENDED PCB LAYOUTCONNECTOR SIDE
SEE AN0002 FOR OPTIMAL PERFORMANCE(MAINTAIN Ø.036 ON Ø.269 FOR GROUND PINS)
8X Ø.020 (0.51)
AØ.002 (0.05)
4X Ø.036 (0.91)
AØ.003 (.08)
.046 (1.17)
.125 (3.17)
Ø.269 (6.83)
Recommended Panel Cutout
.300 ± .003(7.62 ± 0.08))
Ø .344 ± .003(8.74 ± 0.08)
R .015 (0.38) MAX4X
How To OrderSample Part Number 882-013 - ZR S -.080
Product 882-013 = SuperFly Datalink Panel Mount PC Tail Receptacle, Push-Pull
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
PC Tail Finish S = Solder dip, 63/37 tin-lead G = Gold
PC Tail Length .080 = .080” (2.03 mm.) .125 = .125” (3.18 mm.).175 = .175” (4.45 mm.) .200 = 200” (5.08 mm.)
POLARIZATION KEYWAY
8
7
6 5
4
3
21
SPANNER NUT
COIL SPRING
O-RINGS
.020 (0.51)
8X .015 (.38)
4X .030 (.76)
"L"
.620 (5.75) MAX
.455 (11.56) MAX
.100 (2.54) MAXPANEL THICKNESS
.335 MAX
SUPERSPEED
• 5 Gbps
• Low-dielectric insulators
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
Specifications Q Operating temp.: -65° to +125°C
Q Impedance: 90 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
Construction
Q Shell, jam-nut: aluminum alloy or SST Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q O-rings: fluorosilicone Q EMI spring: stainless steel, gold plated Q Potting: epoxy
Spanner Nut Tightening ToolNickel-plated tool steel,¼" sq. drive
13 - 18 in.-lbs. recommended torque
1.00 (25.4)
600-202-E
3534 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito®
Blue
El O
chito
® Bl
ue
SUPERSPEED
• 5 Gbps
• Low-dielectric insulators
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
882-016 90° PC Tail Panel Receptacle, Push-Pull Coupling, USB 3.0
Specifications Q Operating temp.: -65° to +125°C
Q Impedance: 90 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
SuperSpeed USB. Ultraminiature. Rear panel mount. PCB terminals.882-016 SuperFly Datalink receptacles have eight socket contacts. Attach to .100“ (2.54 mm) maximum thickness panel with spanner nut. PC tail contacts are gold plated or solder dipped in 63/37 tin-lead. Contacts are epoxy-sealed and are non-removable. Gold-plated EMI interface spring, fluorosilicone O-rings for panel sealing and for interface sealing. Mates to 882-009, 882-018, 882-033 plug.
PC Board Layout
Panel Cutout
.300 ± .003(7.62 ± 0.08))
Ø .344 ± .003(8.74 ± 0.08)
R .015 (0.38) MAX4X
Spanner Nut Tightening ToolNickel-plated tool steel,¼" sq. drive
13 - 18 in.-lbs. recommended torque
1.00 (25.4)
600-202-E
Construction
Q Shell, jam-nut: aluminum alloy or SST Q Insulators and tray: high-grade rigid
dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q O-rings: fluorosilicone Q EMI spring: stainless steel, gold plated Q Potting: epoxy
Ø.016/.014Ø(0.41/0.36)
.478(12.14)MAX
.150(3.81)MIN
PC TAIL LENGTH.200 (5.08)
O-RINGO-RING
.710 (18.03)MAX
SPANNER NUTEMI SPRING
.100 (2.54)MAX PANEL THICKNESS
45°POLARIZATION KEYWAY
PIN NO. DESIGNATION(NOT MARKED ON PART)
8
7
6
54
3
21
Ø .016/.014(0.41/0.36) 8X
.300(7.62)
.535(13.58)MAX
4X
M8.5 X 0.75-6g THD
.875 (22.23) MAX
.032/.030(0.81/0.76)
2X 2-56 UNC-2B THD
.140 (3.56)
Ø .002 M
8x
How To Order 882-016 Push-Pull Receptacles
Shell Matl/ FinishSalt
Spray Hours
PC Tail Option
Gold Plated Solder Dipped63/37 Sn/Pb
Al/ Electroless Nickel 48 882-016-MG-.200 882-016-MS-.200Al/ Nickel-PTFE 500 882-016-MTG-.200 882-016-MTS-.200Al/ Black Zinc-Nickel 500 882-016-ZRG-.200 882-016-ZRS-.200Al/ Gold 48 882-016-Z2G-.200 882-016-Z2S-.200SST/ Nickel-PTFE 500 882-016-ZMTG-.200 882-016-ZMTS-.200
Connector side of PCBSee AN0002 for optimal perfomance
8X Ø .020 (0.51) MIN
Ø .247(6.27) .300
(7.62)
.125 (3.17)
.046 (1.17)
Ø .002 M
M .510 (12.95)
4X Ø .045 (1.14)
minØ .005
2x Ø .097 (2.46).091 (2.31)
1 2
34
567
8
HIGH SPEED
• 5 Gbps • Low-dielectric insulators
FAST ASSEMBLY • Pre-tinned PC tail contacts • Epoxy-sealed terminals
HARSH ENVIRONMENT • EMI protection • Water ingress • Shock and vibration
882-033 90° PC Tail Panel Receptacle, Push-Pull Coupling, USB 3.0
10GbE. Ultraminiature. Rear panel jam-nut mount. 90° PCB terminals.882-033 SuperFly Datalink receptacles have eight pin contacts. Attach to .100“ (2.54 mm) maximum thickness panel with spanner nut. PC tail contacts are gold plated or solder dipped in 63/37 tin-lead. Contacts are epoxy-sealed and are non-removable. Gold-plated EMI interface spring, fluorosilicone O-rings for panel sealing and for interface sealing. Mates to 882-010, 882-013 and 882-016.
How To Order 882-033 Push-Pull Receptacles
Shell Matl/ FinishSalt
Spray Hours
PC Tail Option
Gold Plated Solder Dipped63/37 Sn/Pb
Al/ Electroless Nickel 48 882-033-MG-.200 882-033-MS-.200Al/ Nickel-PTFE 500 882-033-MTG-.200 882-033-MTS-.200Al/ Black Zinc-Nickel 500 882-033-ZRG-.200 882-033-ZRS-.200Al/ Gold 48 882-033-Z2G-.200 882-033-Z2S-.200SST/ Nickel-PTFE 500 882-033-ZMTG-.200 882-033-ZMTS-.200
PC Board Layout
Panel Cutout
.300 ± .003(7.62 ± 0.08))
Ø .344 ± .003(8.74 ± 0.08)
R .015 (0.38) MAX4X
Spanner Nut Tightening ToolNickel-plated tool steel,¼" sq. drive
13 - 18 in.-lbs. recommended torque
1.00 (25.4)
600-202-E
Specifications Q Operating temp.: -65° to +175°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
Construction
Q Shell, jam-nut: aluminum alloy or SST Q Insulators and tray: high-grade rigid
dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q O-rings: fluorosilicone Q EMI spring: stainless steel, gold plated Q Potting: epoxy
Connector side of PCBSee AN0002 for optimal perfomance
8X Ø .020 (0.51) MIN
Ø .247(6.27) .300
(7.62)
.125 (3.17)
.046 (1.17)
Ø .002 M
M .510 (12.95)
4X Ø .045 (1.14)
minØ .005
2x Ø .097 (2.46).091 (2.31)
1 2
34
567
8
.0022X 2-56 UNC 2B THD
81SPANNER NUTO-RING
45.150 (3.81)
MAX
.710 (18.03)MAX4X.030 (0.76)
.032 (0.81)
.140 (3.56)
.300 (7.62).535 (13.59)MAX
.875 (22.22)MAX
8X .014 (0.36).016 (0.41)L
.478 (12.14)MAX
.100 (2.54) MAXPANEL THICKNESS
3736 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito®
Blue
El O
chito
® Bl
ue
Specifications Q Operating temp.:
-65° to +200°C, aerospace-grade 0 to +80°C, commercial-grade
Q Impedance: 90 ohms Q DWV: 100 Vrms Q Current Rating: 1.5 A Q IR: 100 MΩ min.
8572-0007 Pre-Wired QDC Cordset, Plug-to-Receptacle, USB 3.0
Wiring Diagram How To OrderSample Part Number 8572-0007 - M -01 -36
Product8572-0007 = Pre-wired SuperFly
Datalink assembly, QDC plug to receptacle, USB 3.0
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
Cable Type
01 = Aerospace grade SuperSpeed USB cable fluoropolymer jacket, -65°C to +200°C Cable part number 963-110
02 = Commercial grade SuperSpeed USB cable Black PVC jacket, 0°C to +80°C Cable part number 963-118
Overall Length Length in Inches (12 inch minimum)
Construction
Q Shell, backshell: aluminum alloy or stainless steel
Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommets: fluorosilicone Q O-rings: fluorosilicone Q Bushing, retainer: copper alloy,
electroless nickel plated Q Cable: aerospace-grade or commercial
grade SuperSpeed USB. See cable data sheets for full specifications..
SIZE AND WEIGHT SAVING
• <1/2 inch (12.7 mm.) diameter
• Push-pull quick-disconnect
LOWER INSTALLED COST
• Factory-terminated
• 100% tested
HARSH ENVIRONMENT
• Vibration, EMI, moisture, and temperature
Lower installed cost. 100% tested. Save assembly time and cost with pre-wired SuperFly Datalink “Blue” assemblies for USB 3.0. These back-to-back push-pull cordsets are terminated to SuperSpeed USB cable. Two cable types are available: high temperature f luoropolymer aerospace grade cable or commercial grade PVC cable. Series 882 QDC Octaxial connectors are designed for demanding aerospace environments subject to high vibration, temperature extremes and moisture.
OVERALL LENGTH (INCHES)TOLERANCE: +1.80 (+45.7)/-0.0 IF LENGTH <= 60 (1524)
TOLERANCE +3%/-0 IF LENGTH > 60
RECEPTACLE CONNECTOR882-010
IDENTIFICATION LABEL
8572-0007-X-XX-XXGLENAIR YYWW 06324
1.50 (38.1) MAX 1.50 (38.1) MAX
Ø .415(10.54)
.375 (9.53) HEX .375 (9.53) HEX
Ø .415(10.54)
PLUG CONNECTOR882-009
POLARIZATION KEY
PLUG MATING FACE RECEPTACLE MATING FACE
123
45 6
7
8
POLARIZATION KEYWAY
1 23
456
7
8PIN NUMBERS DO NOT
APPEAR ON CONNECTOR
SUPERSPEEDUSB CABLE
2.00 (50.80) REF
PLUG RECEPTACLE
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
WHT
GRN
YEL
BLU
BLK
RED
VIO
ORN
8572-0006 Pre-Wired QDC Cordset, Single-Ended, USB 3.0
Wiring Diagram
Lower installed cost. 100% tested. Save assembly time and cost with pre-wired SuperFly Datalink “Blue” assemblies for SuperSpeed USB. These single-ended Octaxial push-pull cordsets are terminated to USB cable. Two cable types are available: high temperature fluoropolymer aerospace grade cable or commercial grade PVC cable. Series 882 QDC connectors are designed for demanding aerospace environments.
How To OrderSample Part Number 8572-0006 - MT -03 -60
Product8572-0006 = Pre-wired SuperFly
Datalink assembly, QDC, Single-Ended, USB 3.0
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
Order CodeConnector Type and Cable Type
01 = Plug connector, aerospace-grade cable* 02 = Plug connector, commercial-grade cable**03 = Receptacle connector, aerospace-grade cable*04 = Receptacle connector, commercial-grade cable***Cable P/N 963-110 high temp fluoropolymer jacket**Cable P/N 963-118 black PVC jacket
Overall Length Length in Inches (12 inch minimum)
Specifications Q Operating temp.:
-65° to +200°C, aerospace-grade 0 to +80°C, commercial-grade
Q Impedance: 90 ohms Q DWV: 100 Vrms Q Current Rating: 1.5 A Q IR: 100 MΩ min.
Construction
Q Shell, backshell: aluminum alloy or stainless steel
Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommets: fluorosilicone Q O-rings: fluorosilicone Q Bushing, retainer: copper alloy,
electroless nickel plated Q Cable: aerospace-grade fluoropolymer or
commercial grade PVC
SIZE AND WEIGHT SAVING
• Integral backshell and cable seal
• Push-pull quick-disconnect
LOWER INSTALLED COST
• Factory-terminated
• 100% tested
HARSH ENVIRONMENT
• Vibration, EMI, moisture, and temperature
8
7
6
5
4
3
2
1
WHT
GRN
YEL
BLUP1
BLK
RED
VIO
ORN
OVERALL LENGTH (INCHES)TOLERANCE: +1.80 (+45.7)/-0.0 IF LENGTH <= 60 (1524)
TOLERANCE +3%/-0 IF LENGTH > 60
RECEPTACLE CONNECTOR882-010
IDENTIFICATION LABEL
8572-0006-XX-XX-XX GLENAIR YYWW 06324
1.50 (38.1) MAX
Ø .415(10.54)
.375 (9.53) HEX
Ø .415(10.54)
8572-0006-XX-XX-XX GLENAIR YYWW 06324
PLUG CONNECTOR882-009
SUPERSPEED USB CABLEPOLARIZATION
KEY
PIN NUMBERS NOT MARKED ON PART
123
45 6
7
8
1 23
456
7
8
2.00 (50.80) REF
2.00 (50.80) REF
3938 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito®
Blue
El O
chito
® Bl
ue
882-011 ComponentsConnector is supplied unassembled. Assembly instructions are packaged with kit.
Backshell-Grommet Assembly
O-ring Bushing
Retainer Contacts
Inner Insulator and Spline
Outer Insulator
Shell- Coupling Nut Assembly
How To Order 882-011 SuperFly Datalink Plugs for USB 3.0
Cable Type Cable Part No.
Cable Dia.
Shell Material and FinishAluminum/
Electroless NickelAluminum/ Nickel-PTFE
Aluminum/ Black Zinc-Nickel
Aluminum/ Gold
Stainless Steel/Nickel-PTFE
USB 3.0, Aerospace-Grade Fluoropolymer Jacket, -65°C
to +200°C963-110 .225
(5.72) 882-011-M-01 882-011-MT-01 882-011-ZR-01 882-011-Z2-01 882-011-ZMT-01
USB 3.0, Commercial-grade PVC Jacket, 0°C to +80°C
963-118 .220(5.56) 882-011-M-02 882-011-MT-02 882-011-ZR-02 882-011-Z2-02 882-011-ZMT-02
882-011 Cable Plug, Threaded Coupling, USB 3.0
SuperSpeed USB. Ultraminiature. High performance. 882-011 SuperFly Datalink connectors have eight pin contacts. Compatible with aerospace-grade 90 ohm SuperSpeed USB cable. Supplied as unassembled kit. Terminate wires to contacts with crimp tool. 882-011 plugs have a rotating coupling nut with M8.5 metric thread. Braided cable shield terminates to connector with supplied bushing. Mates to 882-012, 882-014 and 882-015 receptacles.
Specifications Q Operating temp.: -65° to +125°C (0 To
+80°C for commercial-grade cable)
Q Impedance: 90 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
POLARIZATION KEY
PIN NO. DESIGNATION(NOT MARKED ON PART)
1.50 (38.1) MAX
.54 (13.7)
Ø .415(10.54)
Ø .227(5.76)
CABLE (REF)
12
3
4
5 6
7
8
.375 (9.53) HEX
M8.5 X 0.75-6H THD
Construction Q Shell, coupling nut, backshell: aluminum
alloy or stainless steel Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommet: fluorosilicone Q O-ring: fluorosilicone Q Bushing, retainer: copper alloy,
electroless nickel plated
SIZE AND WEIGHT SAVING
• .415 inch (10.5 mm.) diameter
• Integral strain relief and cable seal
• High density contacts
HIGH SPEED
• 5 Gbps
• Low-dielectric material
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
• Temperature extremes
• Corrosion resistance
Contact Crimp Tools
Hand Crimp Tool Positioner for Hand Crimp Tool
809-015(M22520/2-01)
859-101(K1906)
8572-0008 QDC Patch Cord, SuperFly-to-Standard-USB 3.0 Plug
Standard USB connectors. Commercial grade. Save assembly time and cost with pre-wired SuperFly Datalink “Blue” assemblies for SuperSpeed USB. Available with Type A, Type B or µB interfaces, these cordsets have a SuperFly QDC Octaxial connector on one end and a standard USB 3.0 connector on the other end.
How To OrderSample Part Number 8572-0008 - M -01 -24
Product8572-0008 = Pre-wired SuperFly
Datalink assembly, QDC to standard USB 3.0 connector
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
Order CodeConnector Types
01 = Plug connector to USB 3.0 Type A plug 02 = Receptacle connector to USB 3.0 Type A receptacle03 = Receptacle connector to USB 3.0 Type B plug04 = Receptacle connector to USB 3.0 Type µB plug
Overall Length Length in Inches (12 inch minimum)
SuperFly Connector Construction
Q Shell, backshell: aluminum alloy or SST Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches gold over
nickel plating Q Grommet: fluorosilicone Q O-rings: fluorosilicone Q Bushing, retainer: copper alloy, nickel plated Q Cable: commercial-grade shielded USB 3.0 with
black LSZH jacket
Specifications
Q Operating temp.: -0° to +80°C Q Impedance: 90 ohms Q DWV: 100 Vrms Q Current Rating: 1.5 A Q IR: 100 MΩ min.
SuperFly Connector Mating Face
P1
P1 P2
P2
P2
P2
P1
P1
OVERALL LENGTH (INCHES)TOLERANCE: +1.80 (+45.7)/-0.0 IF LENGTH <= 60 (1524)
TOLERANCE +3%/-0 IF LENGTH > 60
PLUG 882-009
RECEPTACLE882-010
RECEPTACLE882-010
RECEPTACLE882-010
USB 3.0 TYPE A PLUG
USB 3.0 TYPE A RECEP
USB 3.0 TYPE B PLUG
USB 3.0 TYPE MICRO-B PLUG
ORDER CODE 01
ORDER CODE 02
ORDER CODE 03
ORDER CODE 04
8572-0008-X-XX-XXGLENAIR YYWW 06324
8572-0008-XX-XXGLENAIR YYWW 06324
2.00 (50.80) REFIDENTIFICATION LABEL (INFORMATION BELOW)
8572-0008-XX-XXGLENAIR YYWW 06324
2.00 (50.80) REF
8572-0008-XX-XXGLENAIR YYWW 06324
8572-0008-XX-XXGLENAIR YYWW 06324
2.00 (50.80) REF
2.00 (50.80) REF
LABEL INFORMATION
PLUG RECEPTACLE12
3
45 6
7
81 2
3
456
7
8
4140 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito®
Blue
El O
chito
® Bl
ue
882-012 PC Tail Receptacle, Threaded Coupling, USB 3.0
SuperSpeed USB. Ultraminiature. Rear panel mount. PCB terminals.882-012 SuperFly Datalink receptacles have eight socket contacts. Attach to .100“ (2.54 mm) maximum thickness panel with spanner nut. PC tail contacts are gold plated or solder dipped in 63/37 tin-lead. Contacts are epoxy-sealed and are non-removable. Gold-plated EMI interface spring, fluorosilicone O-rings for panel sealing and for interface sealing. Mates to 882-011 plug.
COIL SPRING
SPANNER NUT
O-RINGSMAIN KEY
8
7
6 5
4
3
21.020(0.51)
"L"8X .015(0.38)
4X .030(0.76)
.455 (11.56) MAX
.100 (2.54) MAXPANEL THICKNESS
.320 (8.13) MAX
.640 (16.26)MAX
HIGH SPEED
• 5 Gbps
• Low-dielectric insulators
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
Recommended PC Board Layout
RECOMMENDED PCB LAYOUTCONNECTOR SIDE
SEE AN0002 FOR OPTIMAL PERFORMANCE(MAINTAIN Ø.036 ON Ø.269 FOR GROUND PINS)
8X Ø.020 (0.51)
AØ.002 (0.05)
4X Ø.036 (0.91)
AØ.003 (.08)
.046 (1.17)
.125 (3.17)
Ø.269 (6.83)
Recommended Panel Cutout
.300 ± .003(7.62 ± 0.08))
Ø .344 ± .003(8.74 ± 0.08)
R .015 (0.38) MAX4X
How To OrderSample Part Number 882-012 - Z2 S -.080
Product 882-012 = SuperFly Datalink Panel Mount PC Tail Receptacle
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
PC Tail Finish S = Solder dip, 63/37 tin-lead G = Gold
PC Tail Length .080 = .080” (2.03 mm.) .125 = .125” (3.18 mm.).175 = .175” (4.45 mm.) .200 = 200” (5.08 mm.)
Specifications Q Operating temp.: -65° to +125°C
Q Impedance: 90 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
Construction
Q Shell, jam-nut: aluminum alloy or SST Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q O-rings: fluorosilicone Q EMI spring: stainless steel, gold plated Q Potting: epoxy
Spanner Nut Tightening ToolNickel-plated tool steel,¼" sq. drive
13 - 18 in.-lbs. recommended torque
1.00 (25.4)
600-202-E
How To Order 882-014 SuperFly Datalink Receptacles for USB 3.0
Cable Type Cable Part No.
Cable Dia.
Shell Material and FinishAluminum/
Electroless NickelAluminum/ Nickel-PTFE
Aluminum/BlackZinc-Nickel
Aluminum/ Gold
Stainless Steel/Nickel-PTFE
USB 3.0, Aerospace-Grade Fluoropolymer Jacket,
-65°C to +200°C963-110 .225
(5.72) 882-014-M-01 882-014-MT-01 882-014-ZR-01 882-014-Z2-01 882-014-ZMT-01
USB 3.0, Commercial-grade PVC Jacket, 0°C to +80°C
963-118 .220(5.56) 882-014-M-02 882-014-MT-02 882-014-ZR-02 882-014-Z2-02 882-014-ZMT-02
882-014 ComponentsConnector is supplied unassembled. Assembly instructions are packaged with kit.
Shell Assembly
Backshell-Grommet Assembly
O-ring Bushing
Retainer Contacts
Inner Insulator and Spline
Outer Insulator
882-014 Cable Receptacle, Threaded Coupling, USB 3.0
SuperSpeed USB. Ultraminiature. High performance. 882-014 SuperFly Datalink connectors have eight socket contacts. Compatible with aerospace-grade 90 ohm SuperSpeed USB cable. Supplied as unassembled kit. Terminate wires to contacts with crimp tool (purchased separately). M8.5 metric mating thread. Internal O-ring and gold-plated EMI spring. Braided cable shield terminates to connector with supplied bushing. Mates to 882-011 plug.
Specifications
Q Operating temp.: -65° to +125°C
Q Impedance: 90 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
Construction
Q Shell, backshell: aluminum alloy or SST Q Insulators: low dielectric constant
thermoplastic Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommet: fluorosilicone Q O-rings: fluorosilicone Q EMI spring: stainless steel, gold plated Q Bushing, retainer: copper alloy,
electroless nickel plated
Contact Crimp Tools
Hand Crimp Tool Positioner for Hand Crimp Tool
809-015(M22520/2-01)
859-101(K1906)
1.50 (38.1) MAX.535 (13.59)
CABLE (REF)
.375 (9.53) HEX
O-RING M8.5 X 0.75-6G THD
POLARIZATION KEYWAY
PIN NO. DESIGNATION(NOT MARKED ON PART)
Ø .415(10.54)
1 2
3
4
56
7
8
SIZE AND WEIGHT SAVING
• 415 inch (10.5 mm.) diameter
• Integral strain relief and cable seal
• High density contacts
HIGH SPEED
• 5 Gbps
• Low-dielectric material
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
• Temperature extremes
• Corrosion resistance
4342 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito®
Blue
El O
chito
® Bl
ue
SuperSpeed USB. Ultraminiature. Rear panel mount. PCB terminals.882-015 SuperFly Datalink receptacles have eight socket contacts. Attach to .100" (2.54 mm) maximum thickness panel with spanner nut. PC tail contacts are gold plated or solder dipped in 63/37 tin-lead. Contacts are epoxy-sealed and are non-removable. Gold-plated EMI interface spring, fluorosilicone O-rings for panel sealing and for interface sealing. Mates to 882-011 plug.
882-015 90° PC Tail Panel Receptacle, Threaded Coupling, USB 3.0
Specifications Q Operating temp.: -65° to +125°C
Q Impedance: 90 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
.016/.014(0.41/0.36)
.478(12.14)MAX
.150(3.81)MIN
PC TAIL LENGTH.200 (5.08)
O-RINGO-RING
.605 (15.37)MAX
SPANNER NUTEMI SPRING
.100 (2.54)MAX PANEL THICKNESS
45°POLARIZATION KEYWAY
PIN NO. DESIGNATION(NOT MARKED ON PART)
1
2
3
45
6
78
Ø .016/.014(0.41/0.36) 8X
.300(7.62)
.535(13.58)MAX
4X
.875 (22.23) MAX
.032/.030(0.81/0.76)
2X 2-56 UNC-2B THD
.140 (3.56)
Ø .002 M
M8.5 X 0.75-6gTHD 2X
RED STRIPE FULL MATE INDICATOR
How To Order 882-015 Push-Pull Receptacles
Shell Matl/ FinishSalt
Spray Hours
PC Tail Option
Gold Plated Solder Dipped63/37 Sn/Pb
Aluminum/ Electroless Nickel 48 882-015-MG-.200 882-015-MS-.200Aluminum/ Nickel-PTFE 500 882-015-MTG-.200 882-015-MTS-.200Aluminum/ Black Zinc-Nickel 500 882-015-ZRG-.200 882-015-ZRS-.200Aluminum/ Gold 48 882-015-Z2G-.200 882-015-Z2S-.200SST/ Nickel-PTFE 500 882-015-ZMTG-.200 882-015-ZMTS-.200
PC Board Layout
Panel Cutout
.300 ± .003(7.62 ± 0.08))
Ø .344 ± .003(8.74 ± 0.08)
R .015 (0.38) MAX4X
Spanner Nut Tightening ToolNickel-plated tool steel,¼" sq. drive
13 - 18 in.-lbs. recommended torque
1.00 (25.4)
600-202-E
HIGH SPEED
• 5 Gbps
• Low-dielectric insulators
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
Construction Q Shell, jam-nut: aluminum alloy or SST Q Insulators and tray: high-grade rigid
dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q O-rings: fluorosilicone Q EMI spring: stainless steel, gold plated Q Potting: epoxy
Connector side of PCBSee AN0002 for optimal perfomance
8X Ø .020 (0.51) MIN
Ø .247(6.27) .300
(7.62)
.125 (3.17)
.046 (1.17)
Ø .002 M
M .510 (12.95)
4X Ø .045 (1.14)
minØ .005
2x Ø .097 (2.46).091 (2.31)
1 2
34
567
8
8572-0010 Threaded Coupling Cordset, Single-Ended, USB 3.0
Wiring Diagram
8
7
6
5
4
3
2
1
WHT
GRN
YEL
BLUP1
BLK
RED
VIO
ORN
Lower installed cost. 100% tested. Save assembly time and cost with pre-wired SuperFly Datalink “Blue” Octaxial assemblies for SuperSpeed USB. These single-ended cordsets are terminated to USB cable. Two cable types are available: high temperature f luoropolymer aerospace grade cable or commercial grade PVC cable. Series 882 connectors are designed for demanding aerospace environments.
SIZE AND WEIGHT SAVING
• Integral backshell and cable seal
• Secure threaded coupling nut
LOWER INSTALLED COST
• Factory-terminated
• 100% tested
HARSH ENVIRONMENT
• Vibration, EMI, moisture, and temperature
How To OrderSample Part Number 8572-0010 - M -01 -36
Product8572-0010 = Pre-wired SuperFly
Datalink assembly, Threaded, Single-Ended, USB 3.0
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
Order CodeConnector Type and Cable Type
01 = Plug connector, aerospace-grade cable* 02 = Plug connector, commercial-grade cable**03 = Receptacle connector, aerospace-grade cable*04 = Receptacle connector, commercial-grade cable***Cable P/N 963-110 high temp fluoropolymer jacket**Cable P/N 963-118 black PVC jacket
Overall Length Length in Inches (12 inch minimum)
OVERALL LENGTH (INCHES)TOLERANCE: +1.80 (+45.7)/-0.0 IF LENGTH <= 60 (1524)
TOLERANCE +3%/-0 IF LENGTH > 60
RECEPTACLE CONNECTOR882-014
IDENTIFICATION LABEL
8572-0010-X-XX-XXGLENAIR YYWW 06324
8572-0010-X-XX-XXGLENAIR YYWW 06324
1.50 (38.1) MAX
Ø .415(10.54)
.375 (9.53) HEX
Ø .415(10.54)
PLUG CONNECTOR882-011
SUPERSPEED USB CABLEPOLARIZATION KEY
PIN NUMBERS NOT MARKED ON PART
123
45 6
7
8
1 23
456
7
8
2.00 (50.80) REF
2.00 (50.80) REFSpecifications
Q Operating temp.: -65° to +200°C, aerospace-grade 0 to +80°C, commercial-grade
Q Impedance: 90 ohms Q DWV: 100 Vrms Q Current Rating: 1.5 A Q IR: 100 MΩ min.
Construction Q Shell, coupling nut, backshell: aluminum
alloy or stainless steel Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommets: fluorosilicone Q O-rings: fluorosilicone Q Bushing, retainer: copper alloy,
electroless nickel plated Q Cable: aerospace-grade or commercial
grade SuperSpeed USB. See cable data sheets for full specifications.
4544 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito®
Blue
El O
chito
® Bl
ue
Wiring Diagram
PLUG RECEPTACLE
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
WHT
GRN
YEL
BLU
BLK
RED
VIO
ORN
Specifications Q Operating temp.:
-65° to +200°C, aerospace-grade 0 to +80°C, commercial-grade
Q Impedance: 90 ohms Q DWV: 100 Vrms Q Current Rating: 1.5 A Q IR: 100 MΩ min.
Construction Q Shell, coupling nut, backshell: aluminum
alloy or stainless steel Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommets: fluorosilicone Q O-rings: fluorosilicone Q Bushing, retainer: copper alloy,
electroless nickel plated Q Cable: aerospace-grade or commercial
grade SuperSpeed USB. See cable data sheets for full specifications..
SIZE AND WEIGHT SAVING
• <1/2 inch (12.7 mm.) diameter
• Secure threaded coupling
LOWER INSTALLED COST
• Factory-terminated
• 100% tested
HARSH ENVIRONMENT
• Vibration, EMI, moisture, and temperature
Lower installed cost. 100% tested. Save assembly time and cost with pre-wired SuperFly Datalink “Blue” Octaxial assemblies for USB 3.0. These back-to-back cordsets are terminated to USB cable. Two cable types are available: high temperature f luoropolymer aerospace grade cable or commercial grade PVC cable. Series 882 connectors are designed for demanding aerospace environments subject to high vibration, temperature extremes and moisture.
8572-0011 Threaded Coupling Corsdet, Plug-to-Receptacle, USB 3.0
How To OrderSample Part Number 8572-0011 - M -01 -36
Product8572-0011 = Pre-wired SuperFly Datalink
assembly, plug to receptacle, threaded coupling USB 3.0
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
Cable Type
01 = Aerospace grade SuperSpeed USB cable fluoropolymer jacket, +200°C, laser-markable Cable part number 963-110
02 = Commercial grade SuperSpeed USB cable Black PVC jacket, +80°C Cable part number 963-118
Overall Length Length in Inches (12 inch minimum)
Ø .415(10.54)
1 23
456
7
8
OVERALL LENGTH (INCHES)TOLERANCE: +1.80 (+45.7)/-0.0 IF LENGTH <= 60 (1524)
TOLERANCE +3%/-0 IF LENGTH > 60
RECEPTACLE CONNECTOR882-014
IDENTIFICATION LABEL
8572-0011-X-XX-XXGLENAIR YYWW 06324
1.50 (38.1) MAX 1.50 (38.1) MAX.375 (9.53) HEX .375 (9.53) HEX
PLUG CONNECTOR882-011
SUPERSPEED USB CABLE
PLUG MATING FACE RECEPTACLE MATING FACE
POLARIZATION KEYWAY
PIN NUMBERS DO NOT APPEAR ON CONNECTOR
Ø .415(10.54)
POLARIZATION KEY
123
45 6
7
8
2.00 (50.80) REF
8572-0013 Threaded Coupling Patch Cord, SuperFly-to-USB 3.0
Standard USB connectors. Commercial grade. Save assembly time and cost with pre-wired SuperFly Datalink “Blue” Octaxial assemblies for SuperSpeed USB. Available with Type A, Type B or µB interfaces, these cordsets have a SuperFly connector on one end and a standard USB 3.0 connector on the other end.
How To OrderSample Part Number 8572-0013 - M -01 -24
Product8572-0013 = Pre-wired SuperFly
Datalink assembly, standard USB 3.0 connector, threaded coupling
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
Order CodeConnector Types
01 = Plug connector to USB 3.0 Type A plug 02 = Receptacle connector to USB 3.0 Type A receptacle03 = Receptacle connector to USB 3.0 Type B plug04 = Receptacle connector to USB 3.0 Type µB plug
Overall Length Length in Inches (12 inch minimum)
SuperFly Connector Construction
Q Shell, coupling nut, backshell: aluminum or SST Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches gold over
nickel plating Q Grommet: fluorosilicone Q O-rings: fluorosilicone Q Bushing, retainer: copper alloy, nickel plated Q Cable: commercial-grade shielded USB 3.0 with
black LSZH jacket
Specifications
Q Operating temp.: 0° to +80°C Q Impedance: 90 ohms Q DWV: 100 Vrms unmated Q Current Rating: 1.5 A Q IR: 100 MΩ min.
SuperFly Connector Mating Face
PLUG RECEPTACLE12
3
45 6
7
81 2
3
456
7
8
P1
P1 P2
P2
P2
P2
P1
P1
OVERALL LENGTH (INCHES)TOLERANCE: +1.80 (+45.7)/-0.0 IF LENGTH <= 60 (1524)
TOLERANCE +3%/-0 IF LENGTH > 60
PLUG 882-011
RECEPTACLE882-014
RECEPTACLE882-014
RECEPTACLE882-014
USB 3.0 TYPE A PLUG
USB 3.0 TYPE A RECEP
USB 3.0 TYPE B PLUG
USB 3.0 TYPE MICRO-B PLUG
ORDER CODE 01
ORDER CODE 02
ORDER CODE 03
ORDER CODE 048572-0013-X-XX-XX
GLENAIR YYWW 06324
8572-0013-X-XX-XXGLENAIR YYWW 06324
8572-0013-X-XX-XXGLENAIR YYWW 06324
8572-0013-X-XX-XXGLENAIR YYWW 06324
2.00 (50.80)REF
IDENTIFICATION LABEL(INFORMATION BELOW)
2.00 (50.80)REF
2.00 (50.80)REF
2.00 (50.80)REF
8572-0013-X-XX-XXGLENAIR YYWW 06324
LABEL INFORMATION
47© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
El O
chito
® Re
d
46 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito®
Blue
Commercial Grade SuperSpeed USB Cable
Glenair Part Number963-118
90 ohm commercial-grade cable features PVC jacket. SuperSpeed data pairs feature low dielectric constant foamed PE insulation. Each SuperSpeed pair has an aluminized polyester shield. Overall shield is aluminum foil and aluminum wire braid.
Construction Details
Color CodeSuperSpeed pairs VIO/ORN and BLU/YEL · Power wires RED, BLK · Low speed pair WHT/GRN.
SpecificationsImpedance (ohms) 90 ± 7 (USB 3.0 pairs)Impedance (ohms) 90 ± 15% (USB 2.0 pair)Temperature rating 0 to +80°CVoltage 30VIntra-pair skew 15 ps/1.5mDifferential to common mode 20 dB/cable @ 0.1-7.5 GHz
Frequency (GHz) IL (dB/1.5m) NEXT (dB)0.1 1.5 32
1.25 5.02.5 7.5 323.0 237.5 25.0 23
Aerospace Grade SuperSpeed USB Cable
Glenair Part Number963-110
High performance, high temperature cable delivers dependable signal integrity over longer cable lengths. Fluoropolymer jacket can be laser-marked. Low-skew SuperSpeed data pairs have individual braid shields. -65° to +200°C.
Construction Details
SUPERSPEED PAIRS90 OHM SHIELDED TWISTEDCONDUCTORS - 26 AWG 19X38 SILVER PLATED COPPERINSULATION - PTFE OVER ePTFEBINDER - WHITE ePTFEDRAIN - 28 AWG 19X40 SILVER PLATED COPPERSHIELD - 40 AWG SILVER PLATED COPPERJACKET - FLUOROPOLYMER, WHITE
OUTER SHIELDBINDER - ePTFE AWG 38 SILVER-PLATED COPPER BRAID
POWER PAIRAWG 24 19/36 SILVER-PLATED COPPERFLUOROPLASTIC INSULATIONRED/BLACK TWISTED
UTP SIGNAL PAIR90 OHM UNSHIELDED TWISTED26 AWG 19X38 SILVER PLATED COPPER, FLUOROPLASTIC INSULATION
JACKETFLUOROPOLYMER, NATURAL OVER FLUOROPOLYMER, WHITELASER-MARKABLE .228/.244 (5.8/6.2) DIA.
Color CodeSuperSpeed pairs VIO/ORN and BLU/YEL · Power wires RED, BLK · Low speed pair WHT/GRN.
SpecificationsImpedance (ohms) 90 ± 5Temperature Rating -65° to +200°CVoltage Rating < 50 Vac Dielectric Withstanding Voltage 100 Vac rmsMinimum Bend Radius Static .59 (14.99) Dynamic 2.76 (70.10)Weight 57 g/m nominalAttenuation (SDD21) Freq. (GHz) dB/m max.
.625 1.21.25 1.72.5 2.55.0 3.97.5 5.0
SuperSpeed USB Cables 963-110 and 963-118
SUPERSPEED PAIRS90 OHM SHIELDED TWISTEDCONDUCTORS - 28 AWG 7X36 NICKEL PLATED COPPERINSULATION - FM-PE .041 (1.04)DRAIN - 28 AWG 7X36 NICKEL PLATED COPPERSHIELD - ALUMINUM FOIL
OVERALL SHIELDBINDER- ALUMINUM FOIL FACE OUT SHIELD 2 -16 X 6/0.12mm ALUMINUM
POWER PAIRAWG 24 NICKEL-PLATED COPPERPVC INSULATIONRED/BLACK
UTP SIGNAL PAIR90 OHM UNSHIELDED TWISTED28 AWG 7X36 NICKEL PLATED COPPER, HDPE INSULATION
JACKETBLACK PVC.217 (5.5) OD
882-019 Cable Plug, Push-Pull QDC Coupling
HDMI 2.0 and DisplayPort 1.2. Ultraminiature. High performance. 882-019 SuperFly Datalink connectors have one El Ochito® octaxial contact ringed by 18 pin contacts. Compatible with aerospace-grade cable. Supplied as an unassembled k it. Terminate wires to contacts with crimp tool. 882-019 plugs feature push-pull mating and demating. Bra ided cable sh ie ld ter minates to connec tor banding p lat for m. Mates to 882-020 and 882-022 receptacles.
882-019 ComponentsConnector is supplied unassembled. Assembly instructions are packaged with kit.
SIZE AND WEIGHT SAVING
• .710 inch (18.03 mm.) diameter
• Integral banding platform
• High density contacts
HIGH SPEED
• HDMI and DisplayPort
• El Ochito Technology
HARSH ENVIRONMENT
• EMI protection
• Shock and vibration
• Temperature extremes
• Corrosion resistance
How To Order 882-019 SuperFly Datalink Plugs for HDMI and DisplayPort
Cable Part No. Cable Dia.*
Shell Material and FinishAluminum/
Electroless NickelAluminum/ Nickel-
PTFEAluminum/
Black Zinc-NickelAluminum/
GoldStainless Steel/
Nickel-PTFE
963-120 .350 - .404(8.89 - 10.26) 882-019-M-01 882-019-MT-01 882-019-ZR-01 882-019-Z2-01 882-019-ZMT-01
963-127 .337-.359(8.56 - 9.12) 882-019-M-02 882-019-MT-02 882-019-ZR-02 882-019-Z2-02 882-019-ZMT-02
* See sales drawing for details
MAIN KEY
8
765
4
32 1
MAIN KEY
1810
9 1
OCHITO PINOUTFOR REFERENCE
1.500 (38.10) MAXØ.710 MAX
Integral Backshell and Banding Porch
El Ochito® Red, Octaxial Contact
18 Pin Contacts
Insulator
Plug Body
Construction Q Shell, backshell:
aluminum alloy or stainless steel
Q Insulators: rigid dielectric
Q Contacts: gold plated, copper alloy • 858-030 octaxial contact • 857-309 signal contact
Q Retention clips: copper alloy/N.A.
Specifications Q Operating temp.:
-65° to +125°C Q Impedance: 100
ohms Q DWV: 500 Vrms
unmated Q Current Rating: 1.5 A Q IR: 1000 MΩ min at
500 VAC. Q Durability: 500
mating cycles
Crimp Tools
Hand Crimp Tool809-015
(M22520/2-01)
Positioner for Hand Crimp Tool
859-101(K1906)
963-120 Dash No.
Dash 1
Duralectric Lite -65°C to +200°C, O.D .404 (10.26)
Dash 2
LSZH Polyurethane -40°C to +90°C, O.D. .372 (9.45)
Dash 3
FEP -65°C to +200°C, O.D. .350 (8.89)
963-127 Dash No.
Dash 1
Duralectric Lite -65°C to +200°C, O.D .359 (9.12)
Dash 2
LSZH Polyurethane -40°C to +90°C, O.D. .359 (9.12)
Dash 3
FEP -65°C to +200°C, O.D. .337 (8.56)
4948 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito®
Red
El O
chito
® Re
d
882-020 Cable Receptacle, Push-Pull QDC Coupling
HDMI 2.0 and DisplayPort 1.2. Ultraminiature. High performance. 882-020 SuperFly Datalink connectors have one El Ochito® octaxial contact ringed by 18 socket contacts. Compatible with aerospace-grade cable. Supplied as an unassembled kit. Terminate wires to contacts with crimp tool. 882-020 receptacles feature push-pull mating and demating and are IP67 rated in the mated condition. Braided cable shield terminates to connector banding platform. Mates to 882-019 and 882-021 receptacles.
Construction Q Shell, backshell:
aluminum alloy or stainless steel
Q Insulators: rigid dielectric
Q Contacts: gold plated, copper alloy • 858-030 octaxial contact • 857-309 signal contact
Q Retention clips: copper alloy/N.A.
882-020 ComponentsConnector is supplied unassembled. Assembly instructions are packaged with kit.
SIZE AND WEIGHT SAVING
• .710 inch (18.03 mm.) diameter
• Integral banding platform
• High density contacts
HIGH SPEED
• HDMI and DisplayPort
• El Ochito Technology
HARSH ENVIRONMENT
• EMI protection
• Shock and vibration
• Temperature extremes
• Corrosion resistance
How To Order 882-020 SuperFly Datalink Receptacles for HDMI and DisplayPort
Cable Part No. Cable Dia.*Shell Material and Finish
Aluminum/ Electroless Nickel
Aluminum/ Nickel-PTFE
Aluminum/ Black Zinc-Nickel
Aluminum/ Gold
Stainless Steel/Nickel-PTFE
963-120 .350 - .404(8.89 - 10.26) 882-020-M-01 882-020-MT-01 882-020-ZR-01 882-020-Z2-01 882-020-ZMT-01
963-127 .337-.359(8.56 - 9.12) 882-020-M-02 882-020-MT-02 882-020-ZR-02 882-020-Z2-02 882-020-ZMT-02
* See sales drawing for details
Specifications Q Operating temp.:
-65° to +125°C Q Impedance: 100
ohms Q DWV: 500 Vrms
unmated Q Current Rating: 1.5 A Q IR: 1000 MΩ min at
500 VAC. Q Durability: 500
mating cycles
Integral Banding Platform
El Ochito® Red Octaxial Contact
18 SocketContacts
Insulator
ReceptacleBody
Latching EMI Spring
O-ring
MAIN KEY
8
76 5
4
321
MAIN KEYWAY
10
9
18
1
OCHITO PINOUTFOR REFERENCE
Ø .710 MAX1.500 MAX
882-021 PC Tail Plug, Push-Pull QDC Coupling
SuperSpeed USB. Ultraminiature. Rear panel mount. PCB connector.882-021 SuperFly Datalink plugs have one El Ochito® octaxial contact ringed by eighteen pin contacts. Attach to .125“ (3.17 mm) maximum thickness panel with spanner nut. PC tail contacts are gold plated or solder dipped in 63/37 tin-lead. Contacts are epoxy-sealed and are non-removable. Gold-plated EMI interface spring, fluorosilicone O-rings for panel sealing and for interface sealing. Mates to 882-020 and 882-022.
SIZE AND WEIGHT SAVING
• .805 inch (20.45 mm.) diameter
HIGH SPEED
• HDMI and DisplayPort
• El Ochito Technology
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
Recommended PC Board Layout
Recommended Panel Cutout
.645(16.38)
Ø.069 (1.75)
R .050 (1.27) Max 4X
How To OrderSample Part Number 882-021 - Z2 S -.080
Product 882-021 = SuperFly Datalink Panel Mount PC Tail Plug
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
PC Tail Finish S = Solder dip, 63/37 tin-lead G = Gold
PC Tail Length .080 = .080” (2.03 mm.) .125 = .125” (3.18 mm.).175 = .175” (4.45 mm.) .200 = 200” (5.08 mm.)
Specifications Q Operating temp.: -65° to +125°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
Construction Q Shell, jam-nut: aluminum alloy or SST Q Insulators: low-dielectric material Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q O-rings: fluorosilicone blend Q Potting: epoxy
Spanner Nut Tightening ToolNickel-plated tool steel alloy, ¼" sq. drive
23 - 28 in.-lbs. recommended torque
1.00 (25.4)
600-272-A
SEE NOTE 4PCB LAYOUT
26X .002.020
45.046
.125
.247
4X
GROUND.003
.045 MIN
.202
.172
.125
.066
.212 .202 .172.125
.066
A8
A7
A6A5
A4
A3
A2 A1
DETAIL ASCALE 5.000
SEE DETAIL A
1810
9 1
.805 MAX
.125PANEL THICKNESS
MAX
"L"
.395 (10.03).386 (9.80) .695 (17.65) MAX
for optimal performance, see Glenair application note AN0002
Crimp Tools
Hand Crimp Tool809-015
(M22520/2-01)
Positioner for Hand Crimp Tool
859-101(K1906)
963-120 Dash No.
Dash 1
Duralectric Lite -65°C to +200°C, O.D .404 (10.26)
Dash 2
LSZH Polyurethane -40°C to +90°C, O.D. .372 (9.45)
Dash 3
FEP -65°C to +200°C, O.D. .350 (8.89)
963-127 Dash No.
Dash 1
Duralectric Lite -65°C to +200°C, O.D .359 (9.12)
Dash 2
LSZH Polyurethane -40°C to +90°C, O.D. .359 (9.12)
Dash 3
FEP -65°C to +200°C, O.D. .337 (8.56)
5150 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito®
Red
El O
chito
® Re
d
882-022 PC Tail Receptacle, Push-Pull QDC Coupling
100 Ohm, Ultraminiature. Rear panel mount. PCB Connector.882-022 SuperFly Datalink receptacles have one el Ochito® octaxial contact ringed by 18 socket contacts. Attach to .125 in. (3.17 mm) maximum thickness panel with spanner nut. PC tail contacts are gold plated or solder dipped in 63/37 tin-lead. Contacts are epoxy-sealed and are non-removable. Gold-plated EMI interface spring, fluorosilicone O-rings for panel sealing and for interface sealing. Mates to 882-019 and 882-021plugs.
SIZE AND WEIGHT SAVING
• .805 inch (20.45 mm.) diameter
HIGH SPEED
• HDMI and DisplayPort
• El Ochito Technology
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
Recommended PC Board Layout
Recommended Panel Cutout
.645(16.38)
Ø.069 (1.75)
R .050 (1.27) Max 4X
How To OrderSample Part Number 882-022 - Z2 S -.080
Product 882-021 = SuperFly Datalink Panel Mount PC Tail Plug
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
PC Tail Finish S = Solder dip, 63/37 tin-lead G = Gold
PC Tail Length .080 = .080” (2.03 mm.) .125 = .125” (3.18 mm.).175 = .175” (4.45 mm.) .200 = 200” (5.08 mm.)
Specifications Q Operating temp.: -65° to +125°C Q Impedance: 100 ohms Q DWV: 500 Vrms unmated Q Current Rating: 1.5 A Q IR: 1000 MΩ min. Q Durability: 500 mating cycles Q Ingress protection: IP67
Construction Q Shell, jam-nut: aluminum alloy or SST Q Insulators: low-dielectric material Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q O-rings: fluorosilicone blend Q Potting: epoxy
Spanner Nut Tightening ToolNickel-plated tool steel,¼" sq. drive
23 - 28 in.-lbs. recommended torque
1.00 (25.4)
600-272-A
SEE NOTE 4PCB LAYOUT
26X .002.020
45.046
.125
.247
4X
GROUND.003
.045 MIN
.202
.172
.125
.066
.212 .202 .172.125
.066
A8
A7A6 A5
A4
A3
A2A1
DETAIL ASCALE 5.000
18
1
10
9
SEE DETAIL A
Ø .805 (20.45) MAX"L"
.125 (3.17) MAXPANEL THICKNESS
.335 (8.51) MAX
.617 (15.67)
.607 (15.42)
for optimal performance, see glenair application note AN0002
882-023 Cable Plug, Push-Pull QDC Coupling
100 Ohm. Ultraminiature. High per formance. 882-023 SuperFly Datalink connectors have one, el Ochito® octaxial contact housing eight pin contacts. Compatible with aerospace or commercial grade 100 ohm cable. Supplied as unassembled kit. Terminate wires to contacts with crimp tool. 882-023 plugs feature push-pull mating and demating. Braided cable shield terminates to connector with supplied bushing for EMI protection. Mates to 882-024, 882-027 and 882-030 receptacles.
Construction Q Shell, backshell: aluminum alloy or
stainless steel Q Insulators: low-dielectric material Q Contacts: copper alloy, 50
microinches gold over nickel plating Q Grommet: fluorosilicone Q O-ring: fluorosilicone Q Bushing, retainer: copper alloy,
electroless nickel plated
2
3
4
5 6
7
8
1POLARIZATION KEY
.375 (9.52) HEX
CABLE JACKET SHOWN FOR REFERENCE ONLY
GROMMET
.415 (10.54)
1.50 (38.10) MAX
-03 OPTION
882-023 ComponentsConnector is supplied unassembled. Assembly instructions are packaged with kit.
Shell
Backshell-Grommet Assembly
O-ring Bushing
Retainer Contacts
Inner Insulator and Spline
Outer Insulator
SIZE AND WEIGHT SAVING
• .415 inch (10.5 mm.) diameter
• Integral strain relief and cable seal
• High density contacts
HIGH SPEED
• 5 Gbps
• Low-dielectric material
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
• Temperature extremes
• Corrosion resistance
How To Order 882-023 SuperFly Datalink Plugs for SATA
Cable TypeCable Part No.
Cable Dia.Shell Material and Finish
Aluminum/ Electroless Nickel
Aluminum/ Nickel-PTFE
Aluminum/ Black Zinc-Nickel
Aluminum/ Gold
Stainless Steel/Nickel-PTFE
≤ 1 Gbps, S/FTP, Aerospace-Grade PFA
Insulation, -65°C to +200°C
963-033-26 .220 (5.59) 882-023-M-01 882-023-MT-01 882-023-ZR-01 882-023-Z2-01 882-023-ZMT-01
>1 Gbps, S/FTP Aerospace-Grade, PFA Insulation, Temp. Range (See 963-122 Table)
963-122-X
.277 (7.04)or .299 (7.59) See Dwg.
882-023-M-02 882-023-MT-02 882-023-ZR-02 882-023-Z2-02 882-023-ZMT-02
SATA 3, Shielded Parallel Pair, PFA Insulation,
-65°C to +105°C
963-043-26(2 pc)
.150 (3.81) by
.125 (3.17)882-023-M-03 882-023-MT-03 882-023-ZR-03 882-023-Z2-03 882-023-ZMT-03
Specifications Q Operating temp.: -65° to +125° C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
Contact Crimp Tools
Hand Crimp Tool809-015
(M22520/2-01)
Positioner for Hand Crimp Tool
859-101(K1906)
963-122-X Dash No.
Dash 1
Duralectric Lite -65°C to +200°C, O.D .299 (7.59)
Dash 2
LSZH Polyurethane -40°C to +90°C, O.D. .299 (.759)
Dash 3
FEP -65°C to +200°C, O.D. .277 (7.04)
5352 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito®
Red
El O
chito
® Re
d
882-024 Cable Receptacle, Push-Pull QDC Coupling
POLARIZATION KEY
8
7
6 5
4
3
21
GROMMET
CABLE JACKETSHOWN FOR REFERENCE ONLY
.375 (9.53) HEX
-03 OPTION
O-RING COIL SPRING
Ø .415
1.50 (38.10) MAX
882-024 ComponentsConnector is supplied unassembled. Assembly instructions are packaged with kit.
100 Ohm. Ultraminiature. High performance. 882-024 SuperFly Datalink connectors have eight socket contacts. Compatible with aerospace and commercial grade 100 ohm cable. Supplied as unassembled kit. Terminate wires to contacts with crimp tool (purchased separately). M8.5 metric mating thread. Internal O-ring and gold-plated EMI spring. Braided cable shield terminates to connector with supplied bushing. Mates to 882-023, 882-031, and 882-034 plug.
SIZE AND WEIGHT SAVING
• .415 inch (10.5 mm.) diameter
• Integral strain relief and cable seal
• High density contacts
HIGH SPEED
• 5 Gbps
• Low-dielectric material
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
• Temperature extremes
• Corrosion resistance
O-ring
Spring
Reatainer
Bushing
Contacts Outer Insulator
Inner Insulator and Spline
Backshell-Grommet Assembly
Shell Assembly
Construction Q Shell, backshell: aluminum alloy or
stainless steel Q Insulators: low-dielectric material Q Contacts: copper alloy, 50
microinches gold over nickel plating Q Grommet: fluorosilicone Q O-ring: fluorosilicone Q Bushing, retainer: copper alloy,
electroless nickel plated
How To Order 882-023 SuperFly Datalink Plugs for SATA
Cable Type Cable Part No. Cable Dia.
Shell Material and FinishAluminum/
Electroless NickelAluminum/ Nickel-PTFE
Aluminum/ Black Zinc-Nickel
Aluminum/ Gold
Stainless Steel/Nickel-PTFE
≤ 1 Gpbs, S/FTP Aerospace-Grade
PFA Insulation, -65° to +200°C
963-033-26 .220 (5.59) 882-024-M-01 882-024-MT-01 882-024-ZR-01 882-024-Z2-01 882-024-ZMT-01
>1 Gbps, S/FTP Aerospace-Grade, PFA
Insulation, See 963-122 Table963-
122-X
.277 (7.04) or
.299 (7.59)882-024-M-02 882-024-MT-02 882-024-ZR-02 882-024-Z2-02 882-024-ZMT-02
SATA 3, Shielded Parallel Pair, PFA Insulation,
-65°C to +105°C
963-043-26(2pc)
.071 X .116 (1.80 x 2.95) 882-024-M-03 882-024-MT-03 882-024-ZR-03 882-024-Z2-03 882-024-ZMT-03
Specifications
Q Operating temp.: -65° to +125°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
882-031 PC Tail Panel Plug, Push-Pull Coupling
SuperSpeed USB. Ultraminiature. Rear panel mount. PCB terminals.882-031 SuperFly Datalink plugs have one el Ochito® octaxial contact housing eight individual pin contacts. Attach to .100“ (2.54 mm) maximum thickness panel with spanner nut. PC tail contacts are gold plated or solder dipped in 63/37 tin-lead. Contacts are epoxy-sealed and are non-removable. Gold-plated EMI spring, fluorosilicone O-rings for panel and interface sealing. Mates to 882-024, 882-027 and 882-030 receptacles.
Recommended PC Board Layout
Recommended Panel Cutout
.300 ± .003(7.62 ± 0.08))
Ø .344 ± .003(8.74 ± 0.08)
R .015 (0.38) MAX4X
How To OrderSample Part Number 882-031 - ZR S -.080
Product 882-031 = SuperFly Datalink Panel Mount PC Tail Plug, Push-Pull
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
PC Tail Finish S = Solder dip, 63/37 tin-lead G = Gold
PC Tail Length .080 = .080” (2.03 mm.) .125 = .125” (3.18 mm.).175 = .175” (4.45 mm.) .200 = 200” (5.08 mm.)
SIZE AND WEIGHT SAVING
• .455 inch (mm.) diameter
SUPERSPEED
• 5 Gbps
• Low-dielectric insulators
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
Specifications Q Operating temp.: -65° to +125°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
Construction
Q Shell, jam-nut: aluminum alloy or SST Q Insulators: low-dielectric material Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q O-rings: fluorosilicone Q EMI spring: stainless steel, gold plated Q Potting: epoxy
Spanner Nut Tightening ToolNickel-plated tool steel,¼" sq. drive
13 - 18 in.-lbs. recommended torque
1.00 (25.4)
600-202-E
8
7
65
4
3
2 1
POLARIZATION KEY
O-RING
SPANNER NUT
4X Ø.030 (0.76)
"L"
8X Ø.015 (0.38)
Ø.455 (11.56) MAX
.100 (2.54) MAX PANEL THICKNESS
.395 (10.03) MAX
.690 (17.53) MAX
Connector side of PCBSee AN0002 for optimal performance
(Maintain Ø.036 on Ø.269 for ground pins)
8X Ø.020
A.002(0.05)
4X Ø.036 (0.91)
A.003
(0.08)
.046 (1.17)
.125 (3.17)
Ø .269 (6.83)
Ø
Ø
Contact Crimp Tools
Hand Crimp Tool809-015
(M22520/2-01)
Positioner for Hand Crimp Tool
859-101(K1906)
963-122-X Dash No.
Dash 1
Duralectric Lite -65°C to +200°C, O.D .299 (7.59)
Dash 2
LSZH Polyurethane -40°C to +90°C, O.D. .299 (.759)
Dash 3
FEP -65°C to +200°C, O.D. .277 (7.04)
5554 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito®
Red
El O
chito
® Re
d
882-027 PC Tail Panel Mount Receptacle, Push-Pull QDC Coupling
100 Ohm. Ultraminiature. Rear panel mount. PCB terminals.882-027 SuperFly Datalink receptacles have one el Ochito ® octaxial contact. Attach to .100“ (2.54 mm) maximum thickness panel with spanner nut. PC tail contacts are gold plated or solder dipped in 63/37 tin-lead. Contacts are epoxy-sealed and are non-removable. Gold-plated EMI interface spring, fluorosilicone O-rings for panel and interface sealing. Mates to 882-023, 882-031, and 882-034 plug connectors.
Recommended PC Board Layout
Connector side of PCBSee AN0002 for optimal performance
(Maintain Ø.036 on Ø.269 for ground pins)
8X Ø.020
A.002(0.05)
4X Ø.036 (0.91)
A.003
(0.08)
.046 (1.17)
.125 (3.17)
Ø .269 (6.83)
Ø
Ø
Recommended Panel Cutout
.300 ± .003(7.62 ± 0.08))
Ø .344 ± .003(8.74 ± 0.08)
R .015 (0.38) MAX4X
How To OrderSample Part Number 882-027 - ZR S -.080
Product 882-027 = SuperFly Datalink Panel Mount PC Tail Receptacle, Push-Pull
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
PC Tail Finish S = Solder dip, 63/37 tin-lead G = Gold
PC Tail Length .080 = .080” (2.03 mm.) .125 = .125” (3.18 mm.).175 = .175” (4.45 mm.) .200 = 200” (5.08 mm.)
SIZE AND WEIGHT SAVING
• .455 inch (10.5 mm.) diameter
HIGH-SPEED
• 5 Gbps
• Low-dielectric insulators
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
Specifications Q Operating temp.: -65° to +125°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
Construction Q Shell, jam-nut: aluminum alloy or SST Q Insulators: low-dielectric material Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q O-rings: fluorosilicone Q EMI spring: stainless steel, gold plated Q Potting: epoxy
Spanner Nut Tightening ToolNickel-plated tool steel,¼" sq. drive
13 - 18 in.-lbs. recommended torque
1.00 (25.4)
600-202-E
MAIN KEY
8
7
6 5
4
3
21
COIL SPRING
O-RINGS
SPANNER NUT
4X.030
(0.76)
8X.015
(0.38)
"L"
.620 (15.75) MAX
.100 (2.54) MAXPANEL THICKNESS
.455 (11.56) MAX
.335 (8.51) MAX
100 Ohm. Ultraminiature. Rear panel mount. PCB terminals.882-030 SuperFly Datalink receptacles have one el Ochito® octaxial contact. Attach to .100" (2.54 mm) maximum thickness panel with spanner nut. PC tail contacts are gold plated or solder dipped in 63/37 tin-lead. Contacts are epoxy-sealed and are non-removable. Gold-plated EMI interface spring, fluorosilicone O-rings for panel and interface sealing. Mates to 882-023, 882-031, and 882-034.
882-030 90° PC Tail Panel Receptacle, Push-Pull QDC Coupling
Specifications Q Operating temp.: -65° to +125°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
How To Order 882-030 Push-Pull Receptacles
Shell Matl/ FinishSalt
Spray Hours
PC Tail Option
Gold Plated Solder Dipped63/37 Sn/Pb
Aluminum/ Electroless Nickel 48 882-030-MG-.200 882-030-MS-.200Aluminum/ Nickel-PTFE 500 882-030-MTG-.200 882-030-MTS-.200Aluminum/ Black Zinc-Nickel 500 882-030-ZRG-.200 882-030-ZRS-.200Aluminum/ Gold 48 882-030-Z2G-.200 882-030-Z2S-.200SST/ Nickel-PTFE 500 882-030-ZMTG-.200 882-030-ZMTS-.200
PC Board Layout
Panel Cutout
.300 ± .003(7.62 ± 0.08))
Ø .344 ± .003(8.74 ± 0.08)
R .015 (0.38) MAX4X
Spanner Nut Tightening ToolNickel-plated tool steel,¼" sq. drive
13 - 18 in.-lbs. recommended torque
1.00 (25.4)
600-202-E
HIGH-SPEED
• 5 Gbps
• Low-dielectric insulators
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
• Temperature extremes
• Corrosion resistance
Construction Q Shell, jam-nut: aluminum alloy or SST Q Insulators: low-dielectric material Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q O-rings: fluorosilicone blend Q Potting: epoxy
Connector side of PCBSee AN0002 for optimal perfomance
8X Ø .020 (0.51) MIN
Ø .247(6.27) .300
(7.62)
.125 (3.17)
.046 (1.17)
Ø .002 M
M .510 (12.95)
4X Ø .045 (1.14)
minØ .005
2x Ø .097 (2.46).091 (2.31)
1 2
34
567
8
8 1
.002
2X 2-56 UNC 2B THD
SPANNER NUTO-RING
O-RING
EMI SPRING
45
8X .016 (0.41).014 (0.36)
.605 (15.37) MAX4X .032 (0.81)
.030 (0.76)
.535(13.59)MAX
.875 (22.22)MAX .140 (3.56)
L
.478(12.14)MAX
.100 (2.54) MAX PANEL
THICKNESS
.150(3.81)MIN
.300 (7.62)
5756 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito®
Red
El O
chito
® Re
d
8573-0025 Pre-Wired QDC Cordset, Single-Ended, 100 Ohm
Wiring Diagram
Multi-Gig, 100 Ohm, 100% tested. Save assembly time and cost with pre-wired SuperFly Datalink “Red” assemblies for high-speed applications. These single-ended Octaxial push-pull cordsets are terminated to 100 Ohm cable. Series 882 QDC connectors are designed for demanding aerospace environments.
How To OrderSample Part Number 8573-0025 - MT -03 -60
Product 8572-0025 = Pre-wired SuperFly Datalink assembly, QDC, Single-Ended, 100 Ohm
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
Order Code See Connector Type and Cable Type. See Order Code table
Overall Length Length in Inches (12 inch minimum)
Specifications
Q Operating temperature EFI100, Duralectric Lite: -65° to +200°C, FEP: -65°C to 200°C LSZH Polyurethane: -40°C to 90°C
Q Impedance: 100 ohms Q DWV: 300 Vrms Q Current Rating: 1.5 A Q IR: 100 MΩ min.
Construction Q Shell, backshell: aluminum alloy or
stainless steel Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommets: fluorosilicone Q O-rings: fluorosilicone Q Bushing, retainer: copper alloy,
electroless nickel plated Q Cable: aerospace-grade fluoropolymer,
FEP, LSZH polyurethane, or Duralectric® Lite
SIZE AND WEIGHT SAVING
• Integral backshell and cable seal
• Push-pull quick-disconnect
LOWER INSTALLED COST
• Factory-terminated
• 100% tested
HARSH ENVIRONMENT
• Vibration, EMI, moisture, and temperature
1
2
3
4
5
6
7
8
P1 26 AWG BRN
26 AWG WHT/BRN
26 AWG BLU
26 AWG WHT/BLU
26 AWG ORN
26 AWG WHT/ORN
26 AWG GRN
26 AWG WHT/GRN
OVERALL LENGTH (INCHES)TOLERANCE: +1.80 (+45.7)/-0.0 IF LENGTH ≤ 60 (1524)
TOLERANCE +3%/-0 IF LENGTH > 60
RECEPTACLE CONNECTOR882-024
IDENTIFICATION LABEL
8573-0025-X-01-XX06324
GLENAIR YYWW
1.50 (38.1) MAX
Ø .415(10.54)
.375 (9.53) HEX
Ø .415(10.54)
8573-0025-X-05-XX06324
GLENAIR YYWW
PLUG CONNECTOR882-023
HIGH SPEED 100 OHM CABLEPOLARIZATION
KEY
PIN NUMBERS NOT MARKED ON PART
123
45 6
7
8
1 23
456
7
8
2.00 (50.80) REF
2.00 (50.80) REF
Series 882 Connector and Cable Order CodeOrder Code Connector P/N Plug/Receptacle Data Protocol Cable Jacket Material
01 882-023-X-01 Plug UP TO 1 Gbps 963-033-26 EF100
02 882-023-X-02 Plug >1 Gbps 963-122-1 Duralectric Lite
03 882-023-X-02 Plug >1 Gbps 963-122-2 LSZH Polyurethane
04 882-023-X-02 Plug >1 Gbps 963-122-3 FEP
05 882-024-X-01 Receptacle UP TO 1 Gbps 963-033-26 EF100
06 882-024-X-02 Receptacle >1 Gbps 963-122-1 Duralectric Lite
07 882-024-X-02 Receptacle >1 Gbps 963-122-2 LSZH Polyurethane
08 882-024-X-02 Receptacle >1 Gbps 963-122-3 FEP
100 Ohm. Ultraminiature. Rear panel mount. PCB terminals.882-034 SuperFly Datalink plugs have one el Ochito® octaxial contact. Attach to .100" (2.54 mm) maximum thickness panel with spanner nut. PC tail contacts are gold plated or solder dipped in 63/37 tin-lead. Contacts are epoxy-sealed and are non-removable. Gold-plated EMI interface spring, fluorosilicone O-rings for panel and interface sealing. Mates to 882-023, 882-031, and 882-034.
882-034 90° PC Tail Panel Receptacle, Push-Pull QDC Coupling
Specifications Q Operating temp.: -65° to +125°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
How To Order 882-030 Push-Pull Receptacles
Shell Matl/ FinishSalt
Spray Hours
PC Tail Option
Gold Plated Solder Dipped63/37 Sn/Pb
Aluminum/ Electroless Nickel 48 882-034-MG-.200 882-034-MS-.200Aluminum/ Nickel-PTFE 500 882-034-MTG-.200 882-034-MTS-.200Aluminum/ Black Zinc-Nickel 500 882-034-ZRG-.200 882-034-ZRS-.200Aluminum/ Gold 48 882-034-Z2G-.200 882-034-Z2S-.200SST/ Nickel-PTFE 500 882-034-ZMTG-.200 882-034-ZMTS-.200
PC Board Layout
Panel Cutout
.300 ± .003(7.62 ± 0.08))
Ø .344 ± .003(8.74 ± 0.08)
R .015 (0.38) MAX4X
Spanner Nut Tightening ToolNickel-plated tool steel,¼" sq. drive
13 - 18 in.-lbs. recommended torque
1.00 (25.4)
600-202-E
HIGH-SPEED
• 5 Gbps
• Low-dielectric insulators
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
• Temperature extremes
• Corrosion resistance
Construction Q Shell, jam-nut: aluminum alloy or SST Q Insulators: low-dielectric material Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q O-rings: fluorosilicone blend Q Potting: epoxy
Connector side of PCBSee AN0002 for optimal perfomance
8X Ø .020 (0.51) MIN
Ø .247(6.27) .300
(7.62)
.125 (3.17)
.046 (1.17)
Ø .002 M
M .510 (12.95)
4X Ø .045 (1.14)
minØ .005
2x Ø .097 (2.46).091 (2.31)
1 2
34
567
8
.0022X 2-56 UNC 2B THD
81SPANNER NUTO-RING
45.150 (3.81)
MAX
.710 (18.03)MAX4X.030 (0.76)
.032 (0.81)
.140 (3.56)
.300 (7.62).535 (13.59)MAX
.875 (22.22)MAX
8X .014 (0.36).016 (0.41)L
.478 (12.14)MAX
.100 (2.54) MAXPANEL THICKNESS
5958 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito®
Red
El O
chito
® Re
d
Series 882 Connector and Cable Order CodeOrder Code Plug P/N Receptacle P/N Data Protocol Cable Jacket Material
01 882-023-X-01 882-024-X-01 UP TO 1 Gbps 963-033-26 EFI00
02 882-023-X-02 882-024-X-02 >1 Gbps 963-122-1 Duralectric Lite
03 882-023-X-02 882-024-X-02 >1 Gbps 963-122-2 LSZH Polyurethane
04 882-023-X-02 882-024-X-02 >1 Gbps 963-122-3 FEP
Specifications
Q Operating temperature EF100, Duralectric Lite: -65° to +200°C, FEP: -65°C to +200°C LSZH Polyurethane: -40°C to +90°C
Q Impedance: 100 ohms Q DWV: 100 Vrms Q Current Rating: 1.5 A Q IR: 100 MΩ min.
8573-0026 Pre-Wired QDC Cordset, Plug-to-Receptacle, 100 Ohm
Wiring Diagram How To OrderSample Part Number 8573-0026 - M -01 -36
Product8573-0026 = Pre-wired SuperFly
Datalink assembly, QDC plug to receptacle, 100 Ohm
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
Cable Type See Connector Type and Cable Type. See Order Code table
Overall Length Length in Inches (12 inch minimum)
Construction
Q Shell, backshell: aluminum alloy or stainless steel
Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommets: fluorosilicone Q O-rings: fluorosilicone Q Ground bushing and ferrull: copper alloy,
electroless nickel plated Q Cable: aerospace-grade fluoropolymer,
FEP, polyurethane, or Duralectric® Lite
SIZE AND WEIGHT SAVING
• <1/2 inch (12.7 mm.) diameter
• Push-pull quick-disconnect
LOWER INSTALLED COST
• Factory-terminated
• 100% tested
HARSH ENVIRONMENT
• Vibration, EMI, moisture, and temperature
Lower installed cost. 100% tested. Save assembly time and cost with pre-wired SuperFly Datalink “Red” assemblies for high-speed applications. These back-to-back push-pull cordsets are terminated to 100 Ohm cable. Series 882 QDC Octaxial connectors are designed for demanding aerospace environments subject to high vibration, temperature extremes and moisture.
OVERALL LENGTH (INCHES)TOLERANCE: +1.80 (+45.7)/-0.0 IF LENGTH <= 60 (1524)
TOLERANCE +3%/-0 IF LENGTH > 60
RECEPTACLE CONNECTOR882-024
IDENTIFICATION LABEL
8573-0026-X-XX-XX06324
GLENAIR YYWW
1.50 (38.1) MAX 1.50 (38.1) MAX
Ø .415(10.54)
.375 (9.53) HEX .375 (9.53) HEX
Ø .415(10.54)
PLUG CONNECTOR882-023
POLARIZATION KEY
PLUG MATING FACE RECEPTACLE MATING FACE
123
45 6
7
8
POLARIZATION KEYWAY
1 23
456
7
8PIN NUMBERS DO NOT
APPEAR ON CONNECTOR
100 OHM CABLE2.00 (50.80) REF
P21
2
3
4
5
6
7
8
26 AWG BRN
26 AWG WHT/BRN
26 AWG BLUE
26 AWG WHT/BLU
26 AWG ORANGE
26 AWG WHT/ORN
26 AWG GREEN
26 AWG WHT/GRN
P11
2
3
4
5
6
7
8
882-025 ComponentsConnector is supplied unassembled. Assembly instructions are packaged with kit.
How To Order 882-025 SuperFly Datalink Plugs
AWG DataRate
Cable Part No. Cable Dia.
Shell Material and FinishAluminum/
Electroless NickelAluminum/ Nickel-PTFE
Aluminum/Black Zinc-Nickel
Aluminum/ Gold
Stainless Steel/Nickel-PTFE
26 ≤ 1Gbps 963-033-26 .220 (5.56) 882-025-M-01 882-025-MT-01 882-025-ZR-01 882-025-Z2-01 882-025-ZMT-01
26 > 1Gbps 963-122-X .277 or .299(7.04 or 7.59)* 882-025-M-02 882-025-MT-02 882-025-ZR-02 882-025-Z2-02 882-025-ZMT-02
26 SATA 3 963-043-26(2 pc.)
.071 X .116(1.80 x 2.95) 882-025-M-03 882-025-MT-03 882-025-ZR-03 882-025-Z2-03 882-025-ZMT-03
*See cable specifications at end of this section for details.
882-025 Cable Plug, Threaded Coupling
100 Ohm. Ultraminiature. High performance. 882-025 SuperFly Datalink Octaxial connectors are compatible with #24 and #26 AWG 100 Ohm high-speed cable. Supplied as unassembled kit. Terminate wires to contacts with crimp tool. 882-025 plugs have a rotating coupling nut with M8.5 metric thread. Braided cable shield terminates to connector with supplied bushing. Mates to 882-026, 882-028 and 882-029 receptacles.
Specifications
Q Operating temp.: -65° to +125°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
Construction
Q Shell, coupling nut, backshell: aluminum alloy or stainless steel
Q Insulators: low-dielectric material Q Contacts: copper alloy, 50
microinches gold over nickel plating Q Grommet: fluorosilicone Q O-ring: fluorosilicone Q Inner bushing, retainer: copper
alloy, electroless nickel plated
SIZE AND WEIGHT SAVING
• Smallest high-speed aerospace-grade connector
• Integral strain relief and cable seal
• High density contacts
FAST ASSEMBLY
• Crimp contacts
• Easy shield termination
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
• Temperature extremesBackshell-Grommet Assembly
O-ring Bushing
Retainer Contacts
Inner Insulator
Outer Insulator
Shell- Coupling Nut Assembly
POLARIZATION KEY
PIN NO. DESIGNATION(NOT MARKED ON PART)
1.50 (38.1) MAX.54 (13.7)
Ø .415(10.54)
Ø .227(5.76)
CABLE (REF)
-03 OPTION
12
3
4
5 6
7
8
.375 (9.53) HEX
M8.5 X 0.75-6H THD
Contact Crimp Tools
Hand Crimp Tool809-015
(M22520/2-01)
Positioner for Hand Crimp Tool
859-101(K1906)
963-122-X Dash No.
Dash 1
Duralectric Lite -65°C to +200°C, O.D .299 (7.59)
Dash 2
LSZH Polyurethane -40°C to +90°C, O.D. .299 (.759)
Dash 3
FEP -65°C to +200°C, O.D. .277 (7.04)
6160 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito®
Red
El O
chito
® Re
d
How To Order 882-025 SuperFly Datalink Plugs
AWG DataRate
Cable Part No. Cable Dia.
Shell Material and FinishAluminum/
Electroless NickelAluminum/ Nickel-PTFE
Aluminum/Black Zinc-Nickel
Aluminum/ Gold
Stainless Steel/Nickel-PTFE
26 ≤1 Gbps 963-003-26 .220 (5.56) 882-026-M-01 882-026-MT-01 882-026-ZR-01 882-026-Z2-01 882-026-ZMT-01
26 > 1Gbps 963-122-X .277 or .299(7.04 or 7.59)* 882-026-M-02 882-026-MT-02 882-026-ZR-02 882-026-Z2-02 882-026-ZMT-02
26 SATA 3 963-043-26(2 pc.)
.071 X .116(1.80 x 2.95) 882-026-M-03 882-026-MT-03 882-026-ZR-03 882-026-Z2-03 882-026-ZMT-03
*See cable specifications at end of this section for details.
882-026 ComponentsConnector is supplied unassembled. Assembly instructions are packaged with kit.
882-026 Cable Receptacle, Threaded Coupling
100 Ohm. Ultraminiature. High performance. 882-026 SuperFly Datalink connectors have eight socket contacts. Compatible with #24 and #26 AWG, 100 Ohm high-speed cable. Supplied as unassembled kit. Terminate wires to contacts with crimp tool. M8.5 metric mating thread. Internal O-ring seals to mating plug. Gold-plated interface spring assures low shell-to-shell resistance. Braided cable shield terminates to connector with supplied bushing. Mates with 882-025 plug only.
Specifications
Q Operating temp.: -65° to +125°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
Construction Q Shell, backshell: aluminum alloy or
stainless steel Q Insulators: low-dielectric material Q Contacts: copper alloy, 50
microinches gold over nickel plating Q Grommet: fluorosilicone Q O-rings: fluorosilicone Q EMI spring: stainless steel, gold
plated Q Bushing, retainer: copper alloy,
electroless nickel plated
SIZE AND WEIGHT SAVING
• Smallest high-speed aerospace-grade connector
• Integral strain relief and cable seal
• High density contacts
FAST ASSEMBLY
• Crimp contacts
• Easy shield termination
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
• Temperature extremes Backshell-Grommet Assembly
O-ring Bushing
Retainer Contacts
Inner Insulator and Spline
Outer Insulator
O-ring
Spring
Shell Assembly
1.50 (38.1) MAX.535 (13.59)
CABLE (REF)
.375 (9.53) HEX
-03 OPTION
O-RING M8.5 X 0.75-6G THDRED STRIPE FULL MATE INDICATOR
POLARIZATION KEYWAY
PIN NO. DESIGNATION(NOT MARKED ON PART)
Ø .415(10.54)
1 2
3
4
56
7
8
Contact Crimp Tools
Hand Crimp Tool809-015
(M22520/2-01)
Positioner for Hand Crimp Tool
859-101(K1906)
963-122-X Dash No.
Dash 1
Duralectric Lite -65°C to +200°C, O.D .299 (7.59)
Dash 2
LSZH Polyurethane -40°C to +90°C, O.D. .299 (.759)
Dash 3
FEP -65°C to +200°C, O.D. .277 (7.04)
882-028 PC Tail Receptacle, Threaded Coupling
100 Ohm. Ultraminiature. High performance. PCB terminals.882-028 SuperFly Datalink receptacles have eight socket contacts. Attach to .100“ (2.54 mm) maximum thickness panel with spanner nut. PC tail contacts are gold plated or solder dipped in 63/37 tin-lead. Contacts are epoxy-sealed and are non-removable. Gold-plated EMI interface spring, fluorosilicone O-rings for panel sealing and for interface sealing. Mates to 882-025.
SIZE AND WEIGHT SAVING
• .455 (11.56) diameter
HIGH SPEED
• 5 Gbps
• Low-dielectric insulators
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
Recommended PC Board Layout
8X Ø .020 (0.51)
A.002(0.05)
4X Ø.036A.003
(0.08)
.046 (1.17)
.125(3.17)
.269(6.83)Ø
Ø
Ø
Connector SideSee AN0002 for optimal performance
(maintain Ø.036 on Ø .269 for ground pins)
Recommended Panel Cutout
.300 ± .003(7.62 ± 0.08))
Ø .344 ± .003(8.74 ± 0.08)
R .015 (0.38) MAX4X
How To Order
Sample Part Number 882-028 - Z2 S -.080
Product 882-012 = SuperFly Datalink Panel Mount PC Tail Receptacle
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
PC Tail Finish S = Solder dip, 63/37 tin-lead G = Gold
PC Tail Length .080 = .080” (2.03 mm.) .125 = .125” (3.18 mm.).175 = .175” (4.45 mm.) .200 = 200” (5.08 mm.)
Specifications Q Operating temp.: -65° to +125°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
Construction Q Shell, jam-nut: aluminum alloy or SST Q Insulators: state low-dielectric material Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q O-rings: fluorosilicone Q EMI spring: stainless steel, gold plated Q Potting: epoxy
Spanner Nut Tightening ToolNickel-plated tool steel,¼" sq. drive
13 - 18 in.-lbs. recommended torque
1.00 (25.4)
600-202-E
COIL SPRING
SPANNER NUT
O-RINGSMAIN KEY
8
7
6 5
4
3
21
"L"8X .015(0.38)
4X .030 (0.76)
.455 (11.56) MAX .100 (2.54) MAX PANEL THICKNESS
.320 (8.13)MAX
.640 (16.26) MAX
6362 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito®
Red
El O
chito
® Re
d
100 Ohm. Ultraminiature. High performance. PCB terminals.882-029 SuperFly Datalink receptacles have eight socket contacts. Attach to .100" (2.54 mm) maximum thickness panel with spanner nut. PC tail contacts are gold plated or solder dipped in 63/37 tin-lead. Contacts are epoxy-sealed and are non-removable. Gold-plated EMI interface spring, fluorosilicone O-rings for panel sealing and for interface sealing. Mates to 882-025 plug.
882-029 90° PC Tail Panel Receptacle, Threaded Coupling
Specifications Q Operating temp.: -65° to +125°C
Q Impedance: 100 ohms
Q DWV: 500 Vrms unmated
Q Current Rating: 1.5 A
Q IR: 1000 MΩ min.
Q Durability: 500 mating cycles
Q Ingress protection: IP67
How To Order 882-015 Push-Pull Receptacles
Shell Matl/ FinishSalt
Spray Hours
PC Tail Option
Gold Plated Solder Dipped63/37 Sn/Pb
Aluminum/ Electroless Nickel 48 882-015-MG-.200 882-015-MS-.200Aluminum/ Nickel-PTFE 500 882-015-MTG-.200 882-015-MTS-.200Aluminum/ Black Zinc-Nickel 500 882-015-ZRG-.200 882-015-ZRS-.200Aluminum/ Gold 48 882-015-Z2G-.200 882-015-Z2S-.200SST/ Nickel-PTFE 500 882-015-ZMTG-.200 882-015-ZMTS-.200
PC Board Layout
Panel Cutout
.300 ± .003(7.62 ± 0.08))
Ø .344 ± .003(8.74 ± 0.08)
R .015 (0.38) MAX4X
Spanner Nut Tightening ToolSteel alloy, nickel-plated tool, ¼" sq. drive
13 - 18 in.-lbs. recommended torque
1.00 (25.4)
600-202-E
HIGH SPEED
• 5 Gbps
• Low-dielectric insulators
HARSH ENVIRONMENT
• EMI protection
• Water ingress
• Shock and vibration
Construction Q Shell, jam-nut: aluminum alloy or SST Q Insulators and tray: low-dielectric material Q Contacts: copper alloy, 50 microinches gold
over nickel plating Q O-rings: fluorosilicone Q EMI spring: stainless steel, gold plated Q Potting: epoxy
8 1
.0022X 2-56 UNC 2B THD
SPANNER NUTO-RING
O-RINGEMI SPRING
45
8X .014 (0.36).016 (0.41)
.605 (15.37) MAX4X .030 (0.76)
.032 (0.81)
.535(13.59)MAX
.875 (22.22)MAX .140 (128.02)
L
.478(12.14)MAX
.100 (2.54) MAXPANEL THICKNESS
.150 (3.81)MIN
.300 (7.62)
Wiring Diagram
Lower installed cost. 100% tested. Save assembly time and cost with pre-wired SuperFly Datalink “Red” Octaxial assemblies for high-speed applications. These single -ended cordsets are terminated to 100 Ohm cable. Series 882 connectors are designed for demanding aerospace environments. subject to high vibration, temperature extremes and moisture.
SIZE AND WEIGHT SAVING
• Integral backshell and cable seal
• Secure threaded coupling nut
LOWER INSTALLED COST
• Factory-terminated
• 100% tested
HARSH ENVIRONMENT
• Vibration, EMI, moisture, and temperature
How To OrderSample Part Number 8573-0027 - M -01 -36
Product8573-0027 = Pre-wired SuperFly
Datalink assembly, Threaded, Single-Ended, 100 Ohm
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
Order Code See Connector Type and Cable Type. See Order Code table
Overall Length Length in Inches (12 inch minimum)
OVERALL LENGTH (INCHES)TOLERANCE: +1.80 (+45.7)/-0.0 IF LENGTH <= 60 (1524)
TOLERANCE +3%/-0 IF LENGTH > 60
RECEPTACLE CONNECTOR882-026
IDENTIFICATION LABEL
8573-0027-X-XX-XXGLENAIR YYWW 06324
1.50 (38.1) MAX
Ø .415(10.54)
.375 (9.53) HEX
Ø .415(10.54)
8573-0027-X-XX-XXGLENAIR YYWW 06324
PLUG CONNECTOR882-025
100 OHM CABLEPOLARIZATION KEY
PIN NUMBERS NOT MARKED ON PART
123
45 6
7
8
1 23
456
7
8
2.00 (50.80) REF
2.00 (50.80) REF
Specifications
Q Operating temperature EF100, Duralectric Lite: -65° to +200°C, FEP: -65°C to 200°C LSZH Polyurethane: -40°C to 90°C
Q Impedance: 100 ohms Q DWV: 300 Vrms Q Current Rating: 1.5 A Q IR: 100 MΩ min.
Construction Q Shell, coupling nut, backshell: aluminum
alloy or stainless steel Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommets: fluorosilicone Q O-rings: fluorosilicone Q Bushing, retainer: copper alloy,
electroless nickel plated Q Cable: fluoropolymer, FEP, LSZH
polyurethane, or Duralectric® Lite or EF100 jacket material
8573-0027 Threaded Coupling Corsdet, Single-Ended, 100 Ohm
1
2
3
4
5
6
7
8
P1 26 AWG BRN
26 AWG WHT/BRN
26 AWG BLU
26 AWG WHT/BLU
26 AWG ORN
26 AWG WHT/ORN
26 AWG GRN
26 AWG WHT/GRN
Series 882 Connector and Cable Order CodeOrder Code Connector P/N Plug/Receptacle Data Protocol Cable Jacket Material
01 882-025-X-01 Plug UP TO 1 Gbps 963-033-26 EF100
02 882-025-X-02 Plug >1 Gbps 963-122-1 Duralectric Lite
03 882-025-X-02 Plug >1 Gbps 963-122-2 LSZH Polyurethane
04 882-025-X-02 Plug >1 Gbps 963-122-3 FEP
05 882-026-X-01 Receptacle UP TO 1 Gbps 963-033-26 EF100
06 882-026-X-02 Receptacle >1 Gbps 963-122-1 Duralectric Lite
07 882-026-X-02 Receptacle >1 Gbps 963-122-2 LSZHPolyurethane
08 882-026-X-02 Receptacle >1 Gbps 963-122-3 FEP
Connector side of PCBSee AN0002 for optimal perfomance
8X Ø .020 (0.51) MIN
Ø .247(6.27) .300
(7.62)
.125 (3.17)
.046 (1.17)
Ø .002 M
M .510 (12.95)
4X Ø .045 (1.14)
minØ .005
2x Ø .097 (2.46).091 (2.31)
1 2
34
567
8
6564 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito®
Red
El O
chito
® Re
d
Wiring Diagram
Specifications
Q Operating temperature EF100, Duralectric Lite: -65° to +200°C, FEP: -65°C to 200°C LSZH Polyurethane: -40°C to 90°C
Q Impedance: 100 ohms Q DWV: 300 Vrms Q Current Rating: 1.5 A Q IR: 100 MΩ min.
Construction Q Shell, coupling nut, backshell: aluminum
alloy or stainless steel Q Insulators: high-grade rigid dielectric Q Contacts: copper alloy, 50 microinches
gold over nickel plating Q Grommets: fluorosilicone Q O-rings: fluorosilicone Q Bushing, retainer: copper alloy,
electroless nickel plated Q Cable: fluoropolymer, FEP, LSZH
polyurethane, or Duralectric® Lite or EF100 jacket material
SIZE AND WEIGHT SAVING
• <1/2 inch (12.7 mm.) diameter
• Secure threaded coupling
LOWER INSTALLED COST
• Factory-terminated
• 100% tested
HARSH ENVIRONMENT
• Vibration, EMI, moisture, and temperature
Lower installed cost. 100% tested. Save assembly time and cost with pre-wired SuperFly Datalink “Red” Octaxial assemblies for 100 Ohm applications. These back-to-back cordsets are terminated to 100 Ohm cable. Series 882 connectors are designed for demanding aerospace environments subject to high vibration, temperature extremes and moisture.
8573-0028 Threaded Coupling Corsdet, Plug-to-Receptacle, 100 Ohm
How To OrderSample Part Number 8573-0028 - M -01 -36
Product8573-0028 = Pre-wired SuperFly Datalink
assembly, plug to receptacle, threaded coupling 100 Ohm
Shell Finish
M = Electroless Nickel (aluminum shell)MT = Nickel-PTFE (aluminum shell)ZR = Black Zinc-Nickel (aluminum shell)Z2 = Gold (aluminum shell)ZMT = Nickel-PTFE (stainless steel shell)
Cable Type See Connector Type and Cable Type. See Order Code table
Overall Length Length in Inches (12 inch minimum)
Ø .415(10.54)
1 23
456
7
8
OVERALL LENGTH (INCHES)TOLERANCE: +1.80 (+45.7)/-0.0 IF LENGTH <= 60 (1524)
TOLERANCE +3%/-0 IF LENGTH > 60
RECEPTACLE CONNECTOR882-026
IDENTIFICATION LABEL
8573-0028-X-XX-XXGLENAIR 06324GLENAIR YYWW
1.50 (38.1) MAX 1.50 (38.1) MAX.375 (9.53) HEX .375 (9.53) HEX
PLUG CONNECTOR882-025
100 OHM CABLE
PLUG MATING FACE RECEPTACLE MATING FACE
POLARIZATION KEYWAY
PIN NUMBERS DO NOT APPEAR ON CONNECTOR
Ø .415(10.54)
POLARIZATION KEY
123
45 6
7
8
2.00 (50.80) REF
P21
2
3
4
5
6
7
8
26 AWG BRN
26 AWG WHT/BRN
26 AWG BLUE
26 AWG WHT/BLU
26 AWG ORANGE
26 AWG WHT/ORN
26 AWG GREEN
26 AWG WHT/GRN
P11
2
3
4
5
6
7
8
Series 882 Connector and Cable Order CodeOrder Code Plug P/N Receptacle P/N Data Protocol Cable Jacket Material
01 882-025-X-01 882-026-X-01 UP TO 1 Gbps 963-033-26 EF100
02 882-025-X-02 882-026-X-02 >1 Gbps 963-122-1 Duralectric Lite
03 882-025-X-02 882-026-X-02 >1 Gbps 963-122-2 LSZH Polyurethane
04 882-025-X-02 882-026-X-02 >1 Gbps 963-122-3 FEP
HDMI and DisplayPort Cables for El Ochito® Red
Aerospace Grade 26 AWG S/FTP, High-Speed Cable
Glenair Part Number963-120-1 Duralectric Lite963-120-2 Polyurethane LSZH963-120-3 FEP Jacket
For use with El Ochito red contacts. S/FTP 26 AWG cable has a foil shield around each data pair for reduced crosstalk and attenuation. High data rate cable jacket is available in 3 material types incluing Duralectic Lite, polyurethane and FEP. The high-density construction significantly reduces weight and diameter. Meets HDMI 2.0 and DiplayPort 1.2 up to 5 meters
Construction Details
Specifications
Jacket Material963-120-1 Duralectric963-120-2 Polyurethane LSZH963-120-3 FEP
Impedance (ohms) 100 ±10
Temperature RatingDash 1 and 3: -65° to +200° CDash 2: -40° to +90° C
Outer Diameter
Part Number Approx. Dia.963-120-1 .404 (10.26)963-120-2 .372 (9.45)963-120-3 .350 (8.89)
Jacket Color Black
26 AWG S/FTP, HDMI and DisplayPort Cable
Glenair Part Number963-127-1 Duralectric Lit963-127-2 Polyurethane LSZH963-127-3 FEP Jacket
For use with El Ochito red contacts. S/FTP 26 AWG cable has a foil shield around each data pair for reduced crosstalk and attenuation. High data rate cable jacket is available in 3 material types incluing Duralectic Lite, polyurethane LSZH and FEP. The high-density construction significantly reduces weight and diameter. Meets HDMI 2.0 and DiplayPort 1.2 up to 5 meters
Construction Details
Specifications
Jacket Material963-127-1 Duralectric963-127-2 Polyurethane LSZH963-127-3 FEP
Impedance (ohms) 100 ±10
Temperature Rating963-127-1 and -3: -65° to +200° C963-217-2: -40° to +90° C
Outer Diameter
Part Number Approx. Dia.963-127-1 .359 (9.12)963-127-2 .359 (9.12)963-127-3 .337 (8.56)
Jacket Color Black
1. HIGH SPEED CORE A. DATA PAIR (4X): 100 ± 10 OHM (SHIELDED
TWISTED PAIR) CONDUCTORS: 2X 26 AWG (7/34) SILVER
PLATED COPPER INSULATION: PFA, .013 TO .045 ± .003 OD PAIR SHIELD: .0015 ALUMINUM/POLYIMIDE
TAPE FOIL SIDE OUT, 50% OVERLAP B. OUTER SHIELD: 40 AWG SILVER PLATED
COPPER BRAID, 90% MIN. COVERAGE C. OUTER JACKET: .002" PTFE TAPE 50% LAP
AND SINTER TO .237 ± .007 O.D D. FILLER: PTFE (.038") OD2. 8X # 26 AWG M22759/11-26-X 3. BINDER STRING: NOMEX, PER MIL-C-572, A/R4. OUTER SHIELD: 36 AWG, TIN/COPPER, 90% MIN. COVERAGE5. JACKET MATERIAL PER PART NO. DEVELOPMENT
5
4
1
2
32
1
3
4
51. HIGH SPEED CORE A. DATA PAIR (4X): 100 ± 10 OHM (SHIELDED
TWISTED PAIR) CONDUCTORS: 2X 26 AWG (7/34) SILVER
PLATED COPPER INSULATION: PFA, .013 TO .045 ± .003 OD PAIR SHIELD: .0015 ALUMINUM/POLYIMIDE
TAPE FOIL SIDE OUT, 50% OVERLAP B. OUTER SHIELD: 40 AWG SILVER PLATED
COPPER BRAID, 90% MIN. COVERAGE C. OUTER JACKET: .002" PTFE TAPE 50% LAP
AND SINTER TO .237 ± .007 O.D D. FILLER: PTFE (.038") OD2. 8X # 26 AWG M22759/11-26-X 3. BINDER STRING: NOMEX, PER MIL-C-572, A/R4. OUTER SHIELD: 36 AWG, TIN/COPPER, 90% MIN. COVERAGE5. JACKET MATERIAL PER PART NO. DEVELOPMENT
6766 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882El
Och
ito®
Red
El O
chito
® Re
d
26 AWG High-Speed 4 Pair Cable for El Ochito® Red
26 AWG S/FTP Cat 6A Cable
Glenair Part Number 963-033-26
Manufacturer Part Number RCN9047-26Manufacturer Gore
S/FTP 26 AWG cable has an individual foil shield around each data pair for reduced crosstalk and attenuation. This high data rate Ethernet cable features a unique cable jacket material and high-density construction that significantly reduces weight and diameter. Meets ANSI/TIA 568-C.2 Category 6A requirement up to 213 feet/65 meters. Qualified to SAE AS6070/5 and /6.
Construction Details
CONDUCTOR26 AWG 19X38 SILVER PLATED HIGH STRENGTH COPPER ALLOY
WIRE INSULATIONePTFE / PTFE .050 (1.27)
OVERALL SHIELDAWG 40 SILVER-PLATED COPPER92% MIN COVERAGE
PAIR SHIELDALUMINIZED POLYIMIDE(ALUMINUM OUT)
FILLERFEP/ePTFE.036 (0.94) DIA.JACKETENGINEERED FLUOROPOLYMER EF100 WHITE LASER-MARKABLE 0.004 (0.10) WALL 0.220 (5.59) MAX DIAMETER
Color CodePair #1 Blue, White/Blue · Pair #2 Orange, White/Orange · Pair #3 Green, White/Green · Pair #4 Brown, White/Brown
SpecificationsImpedance (ohms) 100 (+10 -5)Temperature Rating -65° to +200°CWeight (lbs/1000 ft.) 32.0Bend Radius .44 (11.18)Capacitance (pF/ft) 12.5Time Delay 1.24 ns/ft
Maximum Attenuation at 65m Length
Frequency dB10 MHz 5.9
100 MHz 19.1250 MHz 31.1500 MHz 45.3
NEXT (minimum)
Frequency dB1 MHz 74.3
10 MHz 59.2100 MHz 52.3250 MHz 47.9500 MHz 42.2
Aerospace Grade 26 AWG S/FTP, High-Speed Cable
Glenair Part Number963-122-1 Duralectric Lite963-122-2 Polyurethane LSZH963-122-3 FEP Jacket
S/FTP aerospace grade 26 AWG cable has an individual foil shield around each data pair for reduced crosstalk and attenuation. This high-speed cable features three cable jacket material options. High-density construction significantly reduces weight and diameter.
Construction Details
Color CodePair #1 Blue, White/Blue · Pair #2 Orange, White/Orange · Pair #3 Green, White/Green · Pair #4 Brown, White/Brown
Specifications
Jacket Material963-122-1 Duralectric963-122-2 Polyurethane LSZH963-122-3 FEP
Impedance (ohms) 100 (+10 -5)
Temperature RatingDash 1 and 3: -65° to +200° CDash 2: -40° to +90° C
Weight (lbs/1000 ft.) 32.0
Outside Diameter963-122-1 and -3: .299 (7.59)963-122-2: .277 (7.04)
Capacitance (pF/ft) 12.5Time Delay 1.24 ns/ft
Maximum Attenuation at 5m Length
Frequency dB.625 Ghz 4.5.825 Ghz 5.01.25 Ghz 6.52.5 Ghz 9.55.0 Ghz 15.57.5 Ghz 21.08.1 Ghz 22.5
1. CORE A. (4X) DATA PAIR: 100 ±10 OHM (SHIELDED TWISTED PAIR) CONDUCTORS: 2X SIZE 26 AWG (7/34) SILVER PLATED COPPER CONDUCTOR INSULATION: PFA Ø.045 PAIR SHIELD: ALUMINUM/POLYIMIDE TAPE FOIL SIDE OUT B. OUTER SHIELD: 40 AWG SILVER PLATED COPPER BRAID, 90% MIN. COVERAGE C. OUTER JACKET: PTFE TAPE Ø.237 D. FILLER: PTFE 2. JACKET MATERIAL: PER P/N DEVELOPMENT COLOR: BLACK
26 AWG Sheilded Parallel Pair Cable
Glenair Part Number 963-043-26
100 Ohm, shielded parallel pair size 26 AWG cable has an individual foil shield around the data pair for reduced crosstalk and attenuation. This high data rate matched impedance cable is available in FEP jacket. High-density construction significantly reduces weigth and diameter.
Construction Details
Color Code
Blue, White/Blue
SpecificationsImpedance 100 (+10 -5) ohmsTemperature Rating 105° CCapacitance (pF/ft) 12.1 pF/ftV.O.P. 80%
AttenuationdB Drop .25 meter 1 meter 3 meter
3 dB 14 GHz 6 GHz 1.5 GHz7 dB >20 GHz 14 GHz 7 GHz
.071"±.005(0.15 ±0.13)
.116" ±.006(2.95 ±0.15)
FEP JACKET
44 AWG SILVER PLATED COPPER ALLOY BRAID
ALUMINUM/POLYESTER TAPE LAP, FOIL OUT
FLUOROPOLYMERFOAM INSULATOR
ø.045"±.002(1.14 ±0.05)
CONDUCTORSILVER PLATEDHIGH STRENGTHCOPPER ALLOY
SATA Cable for El Ochito® Red
6968 © 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
© 2020 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 882 SuperFly DatalinkDimensions in Inches (millimeters) are subject to change without notice.
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882
The High-Speed Ultraminiature Connector for Harsh Environments
SERIES 882Re
fere
nce
Refe
renc
e
Protective Covers, Part Number Index
882-001 .................................. 10882-002 ................................... 11882-003 ..................................20882-004 ..................................22882-005 .................................. 13882-006.................................. 21882-007 ..................................23882-008.................................. 15882-009 .................................30882-010 .................................. 31882-011 ...................................38882-012 .................................. 40882-013 ...................................33882-014 ..................................39882-015 ...................................42882-016 ..................................34
882-017 ................................... 12882-018 ..................................32882-019 ..................................47882-020 ................................. 48882-021 .................................. 49882-022 ..................................50882-023 .................................. 51882-024 ..................................52882-025 ..................................58882-026 ..................................59882-027 ..................................54882-028 ................................. 60882-029 .................................. 61882-031 ...................................53882-032 .................................. 14882-033 .................................. 41
963-003-26 ............................29963-033-24 ............................28963-033-26 ............................28963-037-24 ............................29963-110 .................................. 46963-118 ...................................47963-120 .................................. 60963-122 ................................... 61963-127 .................................. 60963-033 .................................. 61963-043 ..................................638571-0007 .............................. 168571-0008 ...............................178571-0009 .............................. 188571-0010 ............................... 198571-0012 ...............................24
8571-0013 ...............................258571-0015 ...............................268571-0016 ............................... 278572-0006 .............................358572-0007 ..............................368572-0008 ............................. 378572-0010 ..............................438572-0011 .............................. 448572-0013 ..............................458573-0025 ..............................568573-0026 ..............................578573-0027 ..............................628573-0028 ..............................63
Protective Covers
Series 882 SuperFly Datalink connectors are compatible with shell size E SuperFly protective covers. For ordering information, refer to the Series 88 SuperFly catalog or go to www.glenair.com/SuperFly.
Metal Covers
Quick Disconnect Threaded Coupling
Plug Cover Receptacle Cover Plug Cover Receptacle Cover
667-357 667-356 667-362 667-366
Rubber Covers
Quick Disconnect Threaded Coupling
Plug Cover Receptacle Cover Plug Cover Receptacle Cover
889-004 889-005 889-006 889-007
Part Number Index
Glenair, Inc.1211 Air Way • Glendale, California • 91201-2497
Telephone: 818-247-6000 • Fax: 818-500-9912 • [email protected]
Telephone:+44-1623-638100
Facsimile:+44-1623-638111
Glenair UK Ltd40 Lower Oakham WayOakham Business ParkMansfield, Notts NG18 5BY England
Telephone:06172 / 68 16 0
Facsimile:06172 / 68 16 [email protected]
Glenair GmbHSchaberweg 2861348 Bad HomburgGermany
Telephone:+33-5-34-40-97-40
Facsimile:+33-5-61-47-86-10
Glenair France SARL7, Avenue ParmentierImmeuble Central Parc #231200 ToulouseFrance
Telephone:847-679-8833
Facsimile:847-679-8849
Glenair Microway Systems7000 North Lawndale AvenueLincolnwood, IL60712
Telephone:[email protected]
Glenair Nordic ABGustav III : S Boulevard 46SE-169 27 SolnaSweden
© 2018 Glenair, Inc. Printed in U.S.A.
CAT-160
Telephone:+34-925-89-29-88
Facsimile:+34-925-89-29-87
Glenair IbericaC/ La Vega, 1645612 VeladaSpain
Telephone:203-741-1115
Facsimile:203-741-0053
Glenair Power Products Group20 Sterling DriveWallingford, CT 06492
Telephone: +39-051-782811
Facsimile:+39-051-782259
Telephone: +82-31-8068-1090
Facsimile:+82-31-8068-1092
Glenair Italia S.p.A.Via Del Lavoro, 7 40057 Quarto Inferiore – Granarolo dell’EmiliaBologna, Italy
Glenair Korea B-1304 Gunpo IT Valley 148 Gosan-Ro, Gunpo-Si Kyunggi-Do, Korea435-733
INTERCONNECT SOLUTIONS
MISSION-CRITICAL