Upload
arturo-de-la-cruz-garcia
View
222
Download
0
Embed Size (px)
Citation preview
8/12/2019 Soluciones Para Industria
http://slidepdf.com/reader/full/soluciones-para-industria 1/20
®
H u b b e l l L i g h t i n g I n d u s t r i a l P r o d u c t s
e n l i g h t e n i n g i n d u s t r
8/12/2019 Soluciones Para Industria
http://slidepdf.com/reader/full/soluciones-para-industria 2/20
Industry today faces a more competitive environment
than ever before. Pressure to reduce costs is tremendous.
The search for better, more efficient ways to serve the
customer is ongoing.
Proper lighting is a competitive advantage for your
facility. Not only the quantity of light, but the quality and
efficiency of how that light is delivered is important.
Tasks that have the correct amount of light for the job,
are completed quicker and with fewer errors. The
Illuminating Engineering Society of North America,
IESNA, publishes recommendations for many tasks in
many areas, which we’ve highlighted.
The correct type of light is also critical. There is ongoing
research that blue deficient light such as that produced
by HPS systems is difficult for people to work under. It
causes fatigue that can result in more missed workdays.It is also difficult to discern colors under HPS light
because blue and green colors are visually muted. So, as
your employees try to make decisions based on color,
HPS sources make this task even more difficult.
Correctly lit facilities using white light such as that
produced by the Electro-Reg® Metal Halide system results
in happier, healthier people who can do their jobs quicker
and with fewer errors. This is just one competitive edge
that you can get from Hubbell Lighting.
An example: Hubbell’s Electro-Reg white light metal
halide system also offers longer lamp life. The chart
below shows the typical cost of shutting down an
assembly line. If the light fixtures are in such a location
that you must shut down a line in order to change a
lamp, the cost can be substantial.
ABC Company has 500 million in annual sales and
twenty main product lines. If one line goes down:
LOST $500,000,000 Annual SalesSALES ÷ 20 Main Product Lines
$25,000,000 Sales/Product Line/Year÷ 250 Days/Year
$100,000 Sales/Product Line/Day÷ 24 Hours/Day
$4,166 Sales/Product Line/Hour
LOST 2,000 Employees
WAGES ÷20 Main Product Lines
100 Employees/Product Linex $18 Per Hour
$1,800 Per Hour/Product LIne
LOST Poor Customer Satisfaction $???
CUSTOMERS Missed Deadlines $???
Lost Opportunities $???
At a minimum, it costs ABC Company $6,000 per
hour to shut down one line.
2HUBBELL
today’s industrial environment
8/12/2019 Soluciones Para Industria
http://slidepdf.com/reader/full/soluciones-para-industria 3/20
ASSEMBLY SIMPLE
30 fc
ASSEMBLY EXACTING
300 fc
BAKERY30 fc
DAIRY PRODUCTS50 fc
FOUNDRY50-100 fc
MATERIAL HANDLI30 fc
MACHINE SHOP BENCHWORK
50-100 fc
MACHINE SHOP EXTRA FINE WORK
300 fc
PRINTING75-200 fc
SERVICE STORAGE AREA30 fc
TEXTILE MILLS50-100 fc
AUTOMOTIVE MANUFACTURING FRAME ASSEMBLY
50 fc
AUTOMOTIVE MANUFACTURINGCHASSIS, BODY
ASSEMBLY
50 fc
AUTOMOTIVE MANUFACTURING PARTS INSPECTION
100 fc
AUTOMOTIVE MANUFACTURING FINAL ASSEMBLY,
FINISHING
150-500 fc
CONFERENCE ROOM30-50 fc CLASSROOM
50-100 fc
CAFETERIA10 fc
8/12/2019 Soluciones Para Industria
http://slidepdf.com/reader/full/soluciones-para-industria 4/204HUBBELL
In most facilities, highbays and lowbays make up the majority of
the fixtures. Hubbell Lighting’s complete line of highbay and lowbay
luminaires gives you hundreds of solutions.
The line starts with our Superbay as an entry-level fixture. It is a
modular system of ballast pod and ten different optical assemblies
ready to handle up to a 400 watt lamp with a 55°C ambient rating.
Next is the Tribay™. The Tribay housing is a specification grade fixture
with six different optical assemblies. This fixture has an ambient
temperature rating of 65°C and will handle up to 1000 watt lamps.
The Superwatt® and Lightwatt® fixtures offer excellent vertical illu-
mination and control glare and are truly unique. The larger fixture,
the Superwatt, handles up to a 400 watt lamp with the smaller
Lightwatt handling up to 175 watts.
To round out the line, there’s a complete line of industrial fluo-rescent fixtures to meet any industrial application. All of these
fixtures can be installed using
Hubbell Fast Flex Wiring System.
Highbay / Lowbay
SELECT A BALLAST
Electro-Reg®
Proven in over 2 billion
hours of operation,
this ballast delivers
white light, longer,
and with less light
loss over the life of its
lamp than any other
Metal Halide system,
all using a standard
M-59 lamp.
Pulse-StartA new standard for
energy efficiency and
lamp life, this ballast
is a solid upgrade foryour fixture.
CWAThe standard from
which everything is
measured. Our ballast,
lamp and optics are all
balanced to deliver
maximum performance
8/12/2019 Soluciones Para Industria
http://slidepdf.com/reader/full/soluciones-para-industria 5/20
SLD: Switch Level Dimming for industrialNow controlling HID lighting and delivering increased
energy savings is easy. Hubbell’s Switch Level Dimming
operation creates zones of control connected through
our SLIP (Switch Level Interface Panel) in both new con-
struction or retrofit applications. Payback is determined
by the amount of low level lighting and reduced inputwatts versus full time high level lighting levels. Input
wattage can be reduced by about 50% for both HPS and
Metal Halide.
FEATURES AND REQUIREMENTS• Each Step Level Dimming luminaire requires either
a 4-wire plug and receptacle or a 4-wire splice
connection (with 120V control, 5-wire for 24V)
• Each SLIP interface panel is capable of controlling 8
zones of 10 luminaires for switched 2-level lighting.
• Each SLIP interface panel starts all luminaires at
high light level and prohibits luminaire dimming for
a set 15 minute period to allow complete warm-up
according to all lamp manufacturer’s requirements.
• One control wire required for each control zone
(Two control wires for low voltage, 24V).
• The SLIP interface panel must be powered by
120VAC and be connected to the service common.
An autotransformer can be used to supply the SLIP
interface panel voltage if the system voltage is
other than 120VAC.
• Each SLIP interface panel is supplied with manual
override terminals, that when connected by a
switch will force all luminaires (in all zones) to
full output.
• Each SLOD occupancy detector can be energized
by an independent 120VAC source for maximum
versatility.
• One or more SLOD occupancy detectors are
required for each zone, if independent multiple
zone control is desired.
• Zones may contain luminaires wired to multiple
phases.
• Multiple SLOD occupancy detectors, wired in
parallel, may be used to control one zone.
• Each SLOD occupancy detector must be wired to
the SLIP interface panel or directly to a fixture.
OTHER PRESENCE SENSE LIGHTLEVEL CONTROLS
SWITCH LEVEL INTERFACECONTROL
2-SENSE: PREMIER DUALTECHNOLOGY SENSOR
PS-100: PASSIVE INFRAREDWALL-MOUNTED PIR SENSOR
WALL MOUNTED PASSIVEINFRARED OUTDOOR SENSOR
ULTRASONIC OCCUPANCYSENSOR FOR HOTEL/MOTELHVAC SYSTEMS
PHOTOSENSOR
8/12/2019 Soluciones Para Industria
http://slidepdf.com/reader/full/soluciones-para-industria 6/206HUBBELL
BL-SU• 19" spun alum
reflector
• 5%-7% upligh
• Efficient choic
• Narrow, medi
and wide
• Optional clear
enclosure
• Optional wire
BL-PA2• 16" clear acry
reflector
• 20% uplight
• Good vertical
illumination
• Attractive
appearance
• Various botto
enclosures
• Optional wire
• Damp location
BL-LM• 29" lowbay op
• 90° cutoff fix
• Acrylic refrac
enclosure
• Square optica
distribution
• Optional wire
CH-EU• 19" spun alum
reflector
• Enclosed refle
top
• 5%-7% upligh
• Narrow, medi
and wide
• Economical so
• Optional clear
enclosure
• Optional wire
CH-WD22• 22" diffuse ac
reflector
• 20% uplight
• Good vertical
illumination
• Increased lam
shielding
• Various botto
enclosures
• Optional wire
guard
BL-SD• 19" spun aluminum
reflector
• No uplight
• Efficient choice
• Narrow, medium
and wide
• Optional clear
enclosure
• Optional wire guard
BL-EG• Enclosed and
gasketed
• 19" spun aluminum
reflector, painted
white
• Charcoal breather
option
• Tempered glass
bottom enclosure
• Damp location
• 55°C ambient listing
BL-LB1• 23" lowbay optics
• 90° cutoff fixture
• Acrylic refractor
enclosure
• Square optical
distribution
• Optional wire guard
CH-LM• 29" lowbay optics
• 90° cutoff fixture
• Acrylic refractor
enclosure
• Square optical
distribution
• Optional wire guard
BL-BI• 14" spun aluminum
reflector
• 5%-7% uplight
• Economical solution
• Narrow, medium
and wide
• Optional clear
enclosure
• Optional wire guard
• Damp location
• 55°C ambient listing
BL-AL• 19" spun reflector
• Special aisle light
optics
• Damp location
• 55°C ambient listing
BL-WA• 22" clear acrylic
reflector
• 20% uplight
• Good vertical
illumination
• Attractive
appearance
• Various bottom
enclosures
• Optional wire guard
• Damp location
CH-SW • Tribay with
Superwatt options
• Excellent vertical
illumination
• Low glare
• Unique optical
element
• 25% uplight
• Optional wire guard
CH-OU• 19" spun aluminum
reflector
• 5%-7% uplight
• Narrow, medium
and wide
• Economical solution
• Optional clear
enclosure
• Optional wire guard
G O O D
G O O D
B E T T E R
B E S T
B E S T
CH-WA22• 22" clear acrylic
reflector
• 20% uplight
• Good vertical
illumination
• Attractive
appearance
• Various bottom
enclosures
• Optional wire guard
• Damp location
8/12/2019 Soluciones Para Industria
http://slidepdf.com/reader/full/soluciones-para-industria 7/20
MICROLUX ®
• Low profile lowbay
• One piece optical
and reflector
assembly
• Up to 250 watt
lamp
• Square optical
distribution
SUPERWATT ®
SURFACE • Shipped assembled
and lamped
• Excellent vertical
illumination
• Low glare
• Unique optical
element
• 25% uplight
• Optional wire guard
• Surface mounting
LIGHTWATT ®
SURFACE • Shipped assembled
and lamped
• Excellent vertical
illumination
• Low glare
• Unique optical
element
• 25% uplight
• Optional wire guard
• Surface mounting
GENERAL PURPOSE IG• Economical
fluorescent solution
• Pre or post paint
option
• Shipped fully
assembled
• Optional 10%
uplight
• Optional wire guard
TRIBAY™ REMOTEOFFSET • Low profile
mounting
• Six optical
assemblies
SUPERWATT ®
HOOK/LOOP• Shipped assembled
and lamped
• Excellent vertical
illumination
• Low glare
• Unique optical
element
• 25% uplight
• Optional wire guard
• Hook/loop mounting
LIGHTWATT ®
HOOK/LOOP• Shipped assembled
and lamped
• Excellent vertical
illumination
• Low glare
• Unique optical
element
• 25% uplight
• Optional wire guard
• Hook/loop mounting
IMPERIAL IM• Specification grade
fluorescent
• Optional 25%
uplight
• Shipped fully
assembled
• 39° crosswise
shielding
• Deep “V” center
reflector
• Optional wire guard
SUPERBAY REMOTEOFFSET • Low profile
mounting
• Nine optical
assemblies
SUPERWATT ®
PENDANT • Shipped assembled
and lamped
• Excellent vertical
illumination
• Low glare
• Unique optical
element
• 25% uplight
• Optional wire guard
• Pendant mounting
LIGHTWATT ®
PENDANT • Shipped assembled
and lamped
• Excellent vertical
illumination
• Low glare
• Unique optical
element
• 25% uplight
• Optional wire guard
• Pendant mounting
CROWN IC• Specification grade
fluorescent
• Optional 10%
uplight
• Shipped fully
assembled
• 16° crosswise
shielding
• Optional wire guard
QUICK-ON ®
pendant mount
(shipped standard)
HIGHBAY/LOWBAY MOUNTING PRISMATIC HIGHBAY OPTIONS
SLICK-ON ®
pendant, ceiling,
through-wire mounting
(shipped optional)
BL-LR1 FLAT ACRYLIC
BOTTOM
CDL DLR DROPPED
REFRACTOR
WG-19WIRE GUARD
8/12/2019 Soluciones Para Industria
http://slidepdf.com/reader/full/soluciones-para-industria 8/20
Fast Flex Wiring SystemHubbell Lighting’s Fast Flex flexible wiring system
speeds up the installation of high intensity discharge
(HID) industrial lighting fixtures with light sources such
as high pressure sodium, metal halide, pulse start metal
halide, and Hubbell Lighting’s exclusive Electro-Reg® 2.0
metal halide ballast system. Fast Flex is also suitable for
fluorescent fixture installations. The Fast Flex system
utilizes a minimum number of components to satisfy a
wide variety of applications and provides the installer of
industrial lighting fixtures the same benefits that have
been associated with the installation of lighting fixtures
in commercial applications. The Fast Flex system maxi-
mizes flexibility, allowing fixtures to be easily bypassed,
moved or added in the future.
The Fast Flex system is compatible with the following
Hubbell Lighting industrial fixtures:
• Superbay I
• Tribay™
• Superwatt®
• Lightwatt®
• Microlux
FAST FLEX SYSTEM FEATURES• Completely prewired components
• Easily installed
• Unlimited system flexibility
• UL listed
• Complies with Article 604 of the National
Electrical Code
• Components rated for 20 amps @ 120/208V, 208V,
240V, 277/480V, or 480V
• #10 or #12 copper conductors – 600V – 90°C or
105°C insulation depending on component
• Full size grounding conductors
• Color coded components for voltage differentiation
• Positive locking and connectors keying to insure
safety
• Components designed to make or break under load
DISTRIBUTION BOX
CONNECTOR:THE START OF THEPOWER
INDUSTRIALLIGHTING CABLE:HOW YOU RUN THLINE
FIXTURE CORDASSEMBLY:BRING POWER TOTHE LAMP
EXTENDER CABLELOWER YOUR LIGH
FAST FLEX SPLITTMODULE:THE EASY WAY TOCHANGE DIRECTIO
FAST FLEX FIXTURCONNECTOR:GETTING CONNECT
8/12/2019 Soluciones Para Industria
http://slidepdf.com/reader/full/soluciones-para-industria 9/209HUBBELL
Electro-Reg® 2.0
HUBBELL’S BREAKTHROUGH NO COMPROMISE WHITE LIGHT SYSTEM
Many industrial owners and managers have used High Pressure
Sodium because of the economics involved, but would prefer
the visual acuity and color rendition inherent in a white light
Metal Halide system. Electro-Reg is the answer. In addition to
white light they gain the following advantages over a High
Pressure Sodium system:
• 50%+ longer lamp life
• 50% greater line dip tolerance and 50% greaterbrown-out tolerance. Fewer lamp drop-outs from
voltage variations.
• Better lamp lumen depreciation characteristics
• No end of life lamp cycling
• 60% less ripple (strobe effect) in light output
The total lumen-hours out of the 400W Electro-Reg system are
equal to those of High Pressure Sodium.
ELECTRO-REG PROVIDES THE FOLLOWING
BENEFITS OVER STANDARD METAL HALIDE:• Double lamp life of 400W lamp (50% longer
lamp life for 175W and 250W)
• Hot re-strike in 2 to 4 minutes vs. 9 minutes
• Better color and output stability
• 60% more lumen-hours per lamp
• Superb lamp lumen depreciation characteristics
• 60% lower line harmonics
• 50% greater line dip tolerance and 100%
greater brown-out tolerance - providing fewer
lamp drop-outs due to voltage variations.
• Operates down to -40°C
The 400 watt Electro-Reg 2.0 is supplied with a 40,000 lumen
M59 lamp. However, the system operates superbly with pulse
start lamps and still provides the long life, fast re-strike, color
stability, improved lumen maintenance, low harmonics, and high
dip tolerance system benefits.
The Electro-Reg System provides long lamp life, more constant
output throughout life, and 60% more lumen-hours than standard
Metal Halide with Peak Lead/CWA.
Electro-Reg is available in the following specification grade
luminaire families:
• Superwatt® 2.0
• Controlux® 2.0
• Superbay 2.0 OU, EU, and WA prismatic acrylic series
• Lightwatt LW® series
• Superwatt SW® series
• Magnuspec® MSL
• Architectural HID DownlightingELECTRO-REG MAINTAINS 95%+ LINEPOWER FACTOR OVER LAMP LIFE
ELECTRO-REG’S LINE DIP TOLERANCE IS
30% HIGHER THAN PLA SYSTEMS
100%
lamp age
90%
80%
70%
Electro-Reg
PLA
60%
40%
20%
Electro-Reg
PLA
lamp age
400 Watt 400 Watt 400 Watt Standard Pulse Start Electro-Reg 2.0 Metal Halide CWA M59 Lamp M59 Lamp M135 Lamp
Initial Lumens 40,000 44,000 40,000
Lamp Lumen Depreciation 0.8 0.8 0.9
Ballast Factor 0.95 0.95 1
Maintained Lumens 29,600 32,560 36,000
Fixtures Required 1.4 1.3 1.15
for Equal Lumens
System Watts per Fixture 465 458 450
Fixture Quantity 140 130 115
Rated Lamp Life 20,000 30,000 40,000
Lamp Replacements per 61.3 38.0 25.2
Year
The result: ELECTRO-REG 2.0 vs. Standard Metal Halide & 400 Watt Pulse Start
8/12/2019 Soluciones Para Industria
http://slidepdf.com/reader/full/soluciones-para-industria 10/2010HUBBELL
The backbone of office and commercial environments, Hubbell flu-
orescent lighting makes the specification and installation process
easy. Thousands of combinations of troffers, parabolics, full and
floating doors, retrofit troffer kits, and surface mounted units. All
with the most advanced, energy efficient use of lamps and elec-
tronic ballasts. Enhance areas in industrial applications where flu-
orescent is the practical alternative.
Fluorescent
ParabolicsThe Parabolite® Series
covers hundreds of
possible specifications
from 6 to 64 cells in
2'x2' to 4'x4'
configurations. And
you can meet the
latest standards for
VDT lighting with the
Parabolite® V Series.
Troffers
At Hubbell, Versaline®
equals troffer. Lensed,
static or floating
doors with variousdifferent lens options.
Strips/Wraps
Simple and efficient.
The Hubbell wraps
feature up to 95%
reflectivity in their
reflectors.
8/12/2019 Soluciones Para Industria
http://slidepdf.com/reader/full/soluciones-para-industria 11/20
2X2 PARABO PARABOLITE• 3" deep parabo
louver
• Uniform cell brig
• Heat exchange
concealed
• Suitable for
insulation cont
(T-8 electronic
• All air function
available
• Full back revea
• Damp location
VERSALINE ®
2X2 TROFFE• Full 5.75" cont
housing
• Minimum 4.44
center of lamp
bottom of hou
• Light tight wit
the use of gas
• Door frames a
mitered
• Damp location
• Leads identifie
switching
MEDIUMWRAPAROU• White enamel
post-painted h
• 95% reflectivit
specular reflec
• Minimum 89%
reflectance wit
white housing
• High performa
• Energy saving
• Tool-free refle
removal
• Self-hinging le
either side
ALL PURPOSWRAPAROU• Wall or ceiling
mounted
• Medium or wid
housing
• 2', 4' or 8' leng
• Clear extruded
acrylic or white
acrylic lens
• Built-in connec
positive alignm
• Wall mount 2', • Damp location
PMI SERIES• Wall mounting
mirror
• Excellent illumi
• Linear prisms l
provides direct
light up and do
• Translucent fro
eliminates brig
towards user
2X4 PARABOLIC PARABOLITE ® III• 3" deep parabolic
louver
• Uniform cell brightness
• Heat exchange slots
concealed
• Suitable for
insulation contact
(T-8 electronic only)
• All air functions
available
• Full back reveal
• Damp location
VERSALINE ® V 2X4 RS SERIESTROFFER(Spec grade)
• Full 4" contoured
housing
• Minimum 2.63"
center of lamp to
bottom of housings
• Light tight without
the use of gasketing
• Door frames are
mitered
• Lens tabs
• Damp location
RDS84• High performance
• 84.2% efficient
luminaire
• Two lamp design
• Low brightness
prismatic lens
minimum 3.9"
center of lamp to
bottom of housing
• Low harmonic
(<10%THD) T-8
electronic ballast
• Damp location
GENERAL PURPOSE WRAPAROUND• Rugged steel housing
• Medium or wide
housing
• 2', 4' or 8' lengths
• Clear extruded
acrylic lens
• Metal end plates
• Built-in connector -
positive alignment
• Damp location
4" PARABOLIC PARABOLITE ® III• 4" deep parabolic
louver
• Uniform cell brightness
• Heat exchange slots
concealed
• Suitable for
insulation contact
(T-8 electronic only)
• All air functions
available
• Full back reveal• Damp location
2X4 VDT PARABOLITE ® V • 27 cell
(3x9 configuration)
• Meets IES RP-1
requirements
• Suitable for
insulation contact
• Available with
universal voltage
ballast
• Low profile housing
depth 5.75"
• Damp location
RSS84/RSS383• High performance
• Low profile design
• 84.3% efficient
luminaire (RSS84)
• Low brightness
prismatic lens
minimum 2.63"
center of lamp to
bottom of housing
• Low harmonic
(<20%THD) T-8
electronic ballast
• Damp location
INDIGO® II• Rugged steel housing
• Narrow, medium or
wide housing
• 2', 4' or 8' lengths
• Ultrasonic welded
end panel 5-sided
configuration
• High efficiency lens
with low brightness
panels
• Built-in connector -
positive alignment• Damp location
C SERIES• All purpose
• Wide range of
applications
• Chain hanger
mounting standard
• Continuous row or
individual mounting
• Highly reflective
white finish
• End cap serves as
channel coupler
• Reflector retained byquarter turn latch
VERSALINE ® V 2X4 RD SERIESTROFFER(Premium spec grade)
• Full 5.75" contoured
housing
• Minimum 3.90"
center of lamp to
bottom of housings
• Light tight without
the use of gasketing
• Door frames are
mitered
• Lens tabs
• Damp location
8/12/2019 Soluciones Para Industria
http://slidepdf.com/reader/full/soluciones-para-industria 12/2012HUBBELL
A strong sense of styling, unparalleled performance, and great value are all
integral components of Hubbell Outdoor products. Noted for its rich tradition
of optical developments, Hubbell designs its lighting with the most advanced
technology and strict standard of quality to create innovative products for
today’s complex needs.
At Hubbell, we know that, ultimately, lighting is about function. That’s why
every product we make reflects our understanding of the specific lighting task
at hand. Parking lots, signage, security lighting, building perimeters, walkways
and entryways, anywhere light is needed.
You can specify perimeter lighting with glass or polycarbonate lenses, with up
to a six-to-one spacing-to-mounting height ratio. Floods with lamps ranging
from 50 watts to 1000 watts or decorative architectural cutoff luminaires
deliver high performance and value.
Hubbell is also more than just an individual light; we offer you a total system
of support services to handle the total lighting job. Initial design consultations,
layouts, budget numbers, submittals and on-time product shipments of both
luminaires and poles are all part of the Hubbell promise. So, before you com-
mit to spending a single dime, you know
what fixtures you’ll be using and how they’ll
perform in the field.
OutdoorPerimeterBorosilicate glass or
polycarbonate lenses
put the light where it
performs the best for
safety and security.
IdentityLightingFloodlighting options
to meet every need. A
traditional leader indelivering light to sig-
nage, walls, buildings
and other structures.
From 50 watt Facade
flood to the powerful
1000 watt metal halide
Magnuliter.®
Parking LotQuality lighting systems
with engineered optics
and matching poles
bring the right IES dis-
tribution and wattage
to the application.
Value. Price. Options.
From the company with
the right combination
of optics, styles and
services.
8/12/2019 Soluciones Para Industria
http://slidepdf.com/reader/full/soluciones-para-industria 13/20
NRG 300WALLPACK FAMILY • Refractor and
designs from 9
fluorescent to
watt HPS
• Compact size a
mounting betw
6-10 ft.
• Polycarbonate
are vandal resi
MICROLITER FLOOD• Very compact
with quad tap
ballastry
• 1 ⁄ 2" knuckle mo
• Choice of beam
spreads allows
greater applica
possibilities
• 50-175 watt m
halide and HPS
MAGNUSQUA MSM• Versatile squar
cutoff fixture
• Pole, wall or ce
mounting capa
• Multiple
distributions a
light to be plac
where needed
no light trespa
surrounding ar
• 250-400 watt
halide and HPS
MAGNU V ®
BOLLARDS• Round and squ
cutoff bollards
• Rugged and be
• 50-100 watt
mercury, metal
halide and HPS
• Easy mounting
assembly with
tamper resista
lamp access
• Many decoratipowder paint f
RL/RM ROAD FIXTURES• Wide range of
roadway/parkin
• Cast aluminum
construction
• Cutoff or refra
optics
• 70-400 watt H
and metal halid
PERIMASHIELD®
WALLPACKS• Cut off wallpacks in
polycarbonate or
glass designs
• Use where light
trespass is a concern
• Field adjustment to
socket allows on site
control
• 70-400 watt metal
halide or HPS
MINILITER® IV FLOOD• Compact wide beam
flood with very
uniform distribution
• For sign, facade or
general area lighting
• Tool-free entry allows
quick lamp access
• Quad-Tap® and 480
volt ballastry
• Available 70-400
watt metal halide,
Pulse Start and HPS
MAGNUFORM® III RCS• Compact rectangular
cutoff fixture
• Wattages from
100-400 in metal
halide and HPS
• Three photometric
distributions allow
light control with
cutoff performance
• Pole or wall mount
HUBBELL POLES• Quick shipment,
powder painting,
custom drilling/bases/
accessories and
quality control
provide excellent
value
• Many orders can be
shipped with fixtures
and poles on the
same truck for quick
job site assembly
DURATHON VANDAL RESISTANT • Rugged and made to
stay put
• Three sizes including
wall, surface and
recessed units
• Use in unsupervised
locations so the
lights will stay on
• Incandescent,
fluorescent or HIDsources
PERIMALITER®
WALLPACKS• Polycarbonate and
glass wall packs
• Vertical lamp
performance
• Maximum spacing
capability
• Use less fixtures or
increase your
uniformity
• 70-400 watt metal
halide or HPS
FACADE FLOOD• Very compact 120
volt wide beam flood
• Use for sign, facade
or small area lighting
• Tool-free entry and1 ⁄ 2" cast knuckle
allow easy
installation and
maintenance
• 50-150 watt HPS,
50-100 watt metal
halide
MAGNULITER®
FLOODS• Rugged cast
aluminum
• Multiple beam
spread and mounting
capability
• Wattage choices
range from
250-1000 watt
• Marine/hazardous
version (MVH) adds
even greater
application capability
MAGNUSQUARE ® II MSV• Compact 1000 watt
metal halide vertical
lamp cutoff fixture
• Segmented optics in
four distributions
provide uniform
illumination to large
areas
• Pole or wall mount
• Also available in 400
watt metal halideand HPS
• Sag or flat glass designs
LUMASQUARE ®CEILING UNITS• Two sizes for indoor/
outdoor applications
• Low profile allows
use on low ceilings
• NRG 400 has
fluorescent and 50
watt HPS listings
• NRG 4000 has metal
halide and HPS from
70-175 watt w/
vertical lampperformance
8/12/2019 Soluciones Para Industria
http://slidepdf.com/reader/full/soluciones-para-industria 14/2014HUBBELL
This is just a sampling of our complete line of down, track and
pendant-mounted lighting. Want style? Look at our two circuit
track available with line or low voltage fixtures. Nearly an unlimited
number of configurations of glass and metal lenses and our new
stainless steel finish track system gives you that contemporary
design option. You design, we create the mood.
Downlighting includes energy efficient, long life compact fluorescent
lighting engineered with up to the 42 watt, two-lamp triple tube
D9 Series. Check out the full range of HID lamped downlights from
the 7" metal halide ,100 watt to the 12" square, 175 watt fixture.
Finally, the Ocean. Glass optics in several colors presents a look of
sophistication for that special installation. From 32 watt compact
fluorescent or quartz halogen to 150 watt metal halide options.
Clean. Efficient. Elegant. A visually appealing way to bring light to
your environment.
Architectural
Downlighting, Track &
Pendant LightingDownlightingCompact Fluorescent.
Incandescent. HID.
Lamps and ballasts to
light an 8' ceiling to a
20' sloped loft area.
Energy efficiency
engineered into greatlooking trims. That’s
the Hubbell difference.
TrackClassic round and flat
backs. Wallwash and
two circuit flexible
track systems. The
total line and low
voltage system for the
retail space to theoffice conference room.
PendantGet that certain look
with a handcrafted
glass shade luminaire
designed to communi-
cate your style in the
office, store, or
commercial space.
8/12/2019 Soluciones Para Industria
http://slidepdf.com/reader/full/soluciones-para-industria 15/20
COMPACT FLUORESCENT DOWNLIGHTING• Energy efficient source with long lamp life
• Full range of apertures and types:
– open for general illumination
– lens units for damp locations, cafeteria
food prep areas, restrooms
– wallwash for lobby accents, conference
rooms
• Complete options package including
dimming and emergency battery backup
HID DOWNLIGHTING• High light output
• Available from 50 watt through 400 watt,
metal halide and HPS
• Complete family of trims and housing types
including:
– ellipsoidals for high ceilings requiring low
brightness with high footcandles
– die cast door-in-frame lens units for wet
and damp locations including touch latch
doors for ease of maintenance
– open units in 7", 9" and 12" apertures for
general illumination
INCANDESCENT DOWNLIGHTING• Good general illumination for meeting
or conference rooms where dimming
and low light levels are needed for
presentations
• Low voltage fixtures can provide
highlighting and punch at focal points such
as product displays and main lobby
reception areas
• Ellipsoidals for areas with higher ceilings
in auditoriums and theaters that may
require dimming
• Halogens for bright, pure dazzling accent
lighting anywhere
TRIMS
TRIMS
TRIMS
TRACK LIGHTINGUse in:
• Retail/merchandising
and highlighting
products to attract
customers
• Museums and
lobbies to highlight
product displays,
artwork and
wallwash
• Executive offices and
conference rooms• Employee training
areas and displays
STAINLESS STEEL
LOOK
ARCHITECTURAL
SERIES
CLASSIC SERIES WALLWASH
SERIES
OCEAN • Architectural
pendant
• Provides high
efficiency decorative
illumination in
signature areas
such as lobbies and
conference areas
• Restaurants, food
service counters in
grocery stores, malls
hospital andcorporate cafeterias
ARABIAN OPAL
TRANQUILITY BLUE
CARIBBEAN CORAL
AEGEAN PALE BLUE SHELL
SARGASSO BLACK
SERENITY WHI
DESIGNER
SERIES
low iridescent
specular clear
reflector
clear anodized
aluminum cone
specular anodized
self flange
gold specul
anodized adjus
lamp con
white smooth
splay
white enamel painted
reflector with c73t lens &
white splay trim
ultra low
iridescent cr
baffle
low iridescent specular
clear reflector w/
matte black baffle cone
8/12/2019 Soluciones Para Industria
http://slidepdf.com/reader/full/soluciones-para-industria 16/2016HUBBELL
The Pathfinder® series of emergency and exit lighting is the most complete line
of life safety products in the industry. Using advanced electronics for trouble-
free and energy saving long-life operation, Hubbell products range from mas-
ter-remote combinations to self-contained units for severe environments.
Meeting code. Taking care of safety requirements. Reducing maintenance
costs. Our emergency lighting and exits do all this and more.
Hubbell design technology lets you use as little as two watts of energy to
power an exit and extend the life of an LED exit to over 20 years of 24/7 usage.
And if staying current with your energy lighting code is important, look at
Hubbell’s DART equipment and products. From up to 75 feet away, mainte-
nance personnel can simply point, click and record battery/lamp operation. No
ladders. No loss of time.
Emergency
and ExitExit
The leader in LED
exit technology, our
20 year energy saving
LED exits are a great
choice for low
maintenance, low
energy safety.
Emergency
From severe
environments that
need to meet stringent
NEMA and safety code
requirements from the
plant floor to the
office, there’s a full
range of available,
dependable lights.
8/12/2019 Soluciones Para Industria
http://slidepdf.com/reader/full/soluciones-para-industria 17/20
N4• Wet location
emergency ligh
• 6 volt/12 volt
wattages avail
• Extra power fo
remotes
• FS - food serv
option availabl
FREEDOM SERIES LED• Long life alum
LED exits
• Eight hour run
• Polycarbonate
X2000• Heavy steel ex
series
• Damp location
• AC/EM/Combo
available
PE6• Thermoplastic
emergency ligh
• Remote capabl
• Efficient recta
heads
• Battery and la
included
IMF • 12 volt emerge
light
• Various wattag
and heads avai
• DART available
LEDS• Diffuser LED exits
• Damp location
• Thin profile
• Aluminum housing
C SERIES DIE CAST • Durable cast housing
• LED exit sources
• NiCd battery
• Long life
• Low energy
HLE • Hazardous location
exit
• Incandescent or
fluorescent
• Three-sided sign
order separately
HP• Industrial emergency
light
• NiCd/diagnostic
available
• DART available
HE-ST • Emergency 24 watt
fluorescent
• Wet location
• Low profile
• High efficiencies
P2000• Thermoplastic LED
exits
• Damp location
• Two hour run time
• Thin profile
SYS101SH • Long life LED
sources
• One battery powers
10 exit faces
• Vandal resistant
polycarbonate face
shield
N4E • LED wet location
exit
• Composite housing
• Low maintenance
• Energy saving
• Energy Star
compliant
HE • Steel emergency
light
• 6 volt, choice of
wattages
• Remote capable
• Choice of heads
• DART available
HLEBB• Class I Division 1
emergency light
• MR16 efficient light
sources
• Ceiling/wall/pendant
mount
8/12/2019 Soluciones Para Industria
http://slidepdf.com/reader/full/soluciones-para-industria 18/2018HUBBELL
Need to light that special space? High dust. High vapor. High moisture. When
there is a need to be safe, our Class, Division rated lighting delivers an impres-
sive array of solutions.
Cleanroom lighting meets the highest standards of performance available, up
to a Class I rating.
Marine areas can be lit with the Marine Series of floods. The 316SS flood is
available as an integral ballast/fixture unit or as a remotely ballasted fixture for
even higher wattage applications.
We even have the perfect system to detect even minute imperfections in paint
and finishes. The Detector™ Surface Inspection System is the right call for
quality control.
Hazardous
LegendCI: Class I ignitable
gas/vapor
CII: Class II
combustible dust
CIII: Class III
combustible
fibers/flyings
D1: Division 1
normally
hazardous
D2: Division 2
not normally
hazardous
CID2: not normally
hazardous
gas/vapor
environment
CIID1: normally
hazardous
gas/vapor
environment
NOTE: Many factors are
considered for application of
fixtures for hazardous locations.
Determination of fixture
t-ratings play a vital role in safe
installation of light fixtures in
hazardous locations.
8/12/2019 Soluciones Para Industria
http://slidepdf.com/reader/full/soluciones-para-industria 19/20
HLF EXPLOS PROOF • CID2, CIID1 and
and Marine are
fluorescent ava
in 2, 3, 4 lamp
T-8 and T-12
• Assortment of
ballasts option
HLMB• Enclosed and
gasketed medi
base HID and
compact twin
fluorescent for
CIId1 and CIII
hazardous and
Marine areas
• Its compact de
makes it ideal
low profile
hazardous
applications
HLEZ • Explosion-proo
dust-proof mo
base HID (70-4
smallest in its
• Good for CID2,
and CIII and Ma
locations
• Quick factory
and standardiz
mounting adap
• Lower wattage
paint spray
applications
MARINER™• 316 stainless s
floodlight for
corrosive, mar
hazardous and
ambient areas
• Up to 1000 wa
• High efficiency
(≥ 85%) for red
fixture require
• E-Reg and Puls
Start available
• For shipboard
offshore drillin
petrochemical
CRS CLEANR• Sealed cleanro
recessed and s
mount
• Troffer availab
aluminum, stai
and carbon ste
door frames
• Optional for CI
areas
• Series approve
up to Class I
particulateenvironments
KEMLUX ® KH • Enclosed and
gasketed mogul base
HID for CID2, CIID1
and CIII hazardous
and Marine areas
• Available in
Electro-Reg® ballast
HLE • CID2, CIId1 and CIII
low profile fixture
for medium base HID
and compact twin
tube fluorescent
light sources
• Lightweight design
and quick-connect
factory seal allow
ease of installation
and re-lamping
• Some wattages good
for paint spray
booth applications
PERFORMER™• Fluorescent for
wet/damp, corrosive,
high ambient and
outdoor
environments
• Reliable FRP housing
with acrylic and
polycarbonate lenses
• Tamper-proof latches
• Battery backup
EWL• Reliable, ABS plastic
housing
• Fluorescent for
wet/damp/corrosive
environments where
performance is
critical
• Heat sink design
provides ballast heat
dissipation for
reliable operation
and reducedmaintenance costs
CRF CLEANROOM• Combination
recessed troffer and
HEPA flow through
filter (filter supplied
by others)
• Ideal when ceiling
space is elimination
KEMLUX ® KS• Enclosed and
gasketed mogul base
HID for harsh and
severe environments
• Available in
Electro-Reg® ballast
LIGHTWATT ® D2• CID2 Lightwatt
available in mogul
base HID and triple
tube compact
fluorescent (84W
max) light sources
• Unique optics
eliminate shadows
• Breaks the “jelly jar”
mold
SSHZ • Stainless steel
fluorescent for CID2
and corrosive
environments
• Available in 2, 3
lamp 32 watt (T-8)
and 40 watt (T-12)
sources
DETECTOR®
SURFACE INSPECTION • For automotive and
appliance facilities
• Unique optics enable
inspectors to quickly
detect surface defects
for immediate repair
• Reduces deflected
glare and eye fatigue
• Fluorescent (4', 8')
light source providescomplete surface
coverage
CRA CLEANROOM• Air Foil or “tear
drop” strip
• For grid mounting
when ventilation
ducts take up ceiling
space
• Available in 2' and 4'
8/12/2019 Soluciones Para Industria
http://slidepdf.com/reader/full/soluciones-para-industria 20/20
HUBBELL LIGHTING, INC. WORLDWIDE LOCATIONS
Hubbell Lighting products are manufactured to the highest international standards of quality. ISO 9002 certified facility.Country-wide certifications are indicated throughout the catalog, including UL and CSA. In addition Hubbell Lightingproducts meet the existing NOM requirements for Mexico.Should you need to verify specific country requirements, please contact Hubbell Lighting, Inc. headquarters inChristiansburg, Virginia.
UNITED STATES
HUBBELL LIGHTING, INC.2000 Electric WayChristiansburg, VA 24073-2500PHONE: (540) 382-6111FAX: (540) 382-1526
CANADA
HUBBELL CANADA, INC.870 Brock Road SouthPickering, Ontario L1W 1Z8PHONE: (905) 839-1138FAX: (905) 839-9108
VISIT OUR WEB SITE:
www.hubbell-ltg.com
ASIA
HUBBELL S.E. ASIA PTE. LTD.
159 Sin Ming Road#05-08 Amtech BuildingSingapore 575625PHONE: 65-4544772FAX: 65-4544775
HUBBELL-ANMEX (S)Rm. 2191271, W. Zhongshan Rd.Shanghai 200051, ChinaPHONE: (021) 62759113FAX: (021) 62703959
KOREA
HUBBELL INTERNATIONAL, INC.2nd Floor Jungwon Building1115-8 Hwagok-6 Dong Kangseo-KuSeoul, Korea 157-016PHONE: 82-2-607-1363FAX: 82-2-603-7386
MEXICO
HUBBELL DE MEXICO, S.A. DE.CVAv. Coyoacan No. 1051Col.Del Valle03100 Mexico, D.F.PHONE: (525) 575-2022FAX: (525) 559-8626
MIDDLE EAST
CHALMIT LIGHTING LTD.P.O. Box 46100Abu Dhabi, U.A.E.PHONE: 9714-2823456FAX: 9714-2823221
TAIWAN
HUBBELL TAIAN CO., LTD.12th Floor 66 Sec. 2Chien Kwo North RoadTaipei, TaiwanPHONE: (02) 2515-0855FAX: (02) 2515-0898
(02) 2515-0899