5
FEATURES Luminaire Upper housing is heavy gauge cast aluminum (min. .125" wall; alloy >0.2% Cu for DSTP25) or spun aluminum with reveal (.125" min. wall for DSTP20). Lower housing is 0.080" thick spun aluminum with integrated LED module seat. Lower housing is vented at top and bottom for convective cooling of LED module. Top Driver chamber is barriered from LED Module chamber. Trulevel ball coupling mount is welded to housing and facilitates quick leveling and installation. Optics Low copper (A356 Alloy; <0.2% Cu) cast aluminum housing. Integrated clear tempered glass lens sealed with a continuous silicone gasket protects emitters (LED's), Reflector-Prism optics, and seals the module from water intrusion and environmental contaminants. Module is sealed to meet an IP67 rating. Each emitter is optically controlled by a Reflector-Prism injection molded from H12 acrylic (3 types per module; one from 0° - 50°; one from 50° - 65°; one from 65° - 72°). Each Reflector-Prism is secured to an optical plate made of matte black anodized aluminum has indexing pins for precise aiming. The optical plate locates every Reflector-Prism over an emitter, are inserted to the optical plate from above and are secured with a UV curing adhesive. The Reflector-Prisms are arrayed to produce IES Type II, III, IV, and V-SQ distributions. The entire Optical Module is field rotatable in 90° increments. Both module and drivers are factory wired using water resistant, insulated cord. LED Emitters High output LED's are utilized with drive currents ranging from 350mA to 700mA. 70CRI Minimum. LED’s are available in standard Neutral White (4000K), or optional Cool White (5000K) or Warm White (3000K). Consult Factory for other LED options. LED Driver Constant current programmable electronic with a power factor of >.90 and a minimum operating temperature of -40°F/-40°C. Driver(s) is/are UL and cUL recognized. In-line terminal blocks facilitate wiring between the driver and optical arrays. Drivers accept an input of 120-277V, 50/60Hz or 347V-480V, 50,60Hz. (0 - 10V dimmable driver is standard. Driver has a minimum of 3KV internal surge protection. Luminaire supplied with 20KV surge protector for field installation.) Amber LED’s PCA (Phosphor Converted Amber) LED’s utilize phosphors to create color output similar to LPS lamps and have a slight output in the blue spectral bandwidth. TRA (True Amber) LED’s utilize material that emits light in the amber spectral bandwidth only without the use of phosphors. Finish Polyester powder coat incorporates four step iron phosphate process to pretreat metal surface for maximum adhesion. Top coat is baked at 400°F for maximum hardness and exterior durability. DSTP25 Patent pending DSTP20 Patent pending ® 25" 635mm 20" 508mm 17" 432mm 15" 381mm (Formerly DSTP1) SOLID STATE AREA LIGHTING DSTP SERIES - VLED PROJECT NAME: FIXTURE TYPE: 660 West Avenue O, Palmdale, CA 93551 Phone (661) 233-2000 Fax (661) 233-2001 www.usaltg.com U.S. Pole Co Inc. 2020058

SOLID STATE AREA LIGHTING DSTP SERIES - VLEDLED Count Source Type Source Initial Lumens L70 greater than (HR) Starting Temp. System Watts Volts Max Input Amps 120 277 347 120 277 347

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: SOLID STATE AREA LIGHTING DSTP SERIES - VLEDLED Count Source Type Source Initial Lumens L70 greater than (HR) Starting Temp. System Watts Volts Max Input Amps 120 277 347 120 277 347

FEATURES

LuminaireUpper housing is heavy gauge cast aluminum (min. .125" wall; alloy >0.2% Cu for DSTP25) or spun aluminum with reveal (.125" min. wall for DSTP20). Lower housing is 0.080" thick spun aluminum with integrated LED module seat. Lower housing is vented at top and bottom for convective cooling of LED module. Top Driver chamber is barriered from LED Module chamber. Trulevel ball coupling mount is welded to housing and facilitates quick leveling and installation. OpticsLow copper (A356 Alloy; <0.2% Cu) cast aluminum housing. Integrated clear tempered glass lens sealed with a continuous silicone gasket protects emitters (LED's), Reflector-Prism optics, and seals the module from water intrusion and environmental contaminants. Module is sealed to meet an IP67 rating. Each emitter is optically controlled by a Reflector-Prism injection molded from H12 acrylic (3 types per module; one from 0° - 50°; one from 50° - 65°; one from 65° - 72°). Each Reflector-Prism is secured to an optical plate made of matte black anodized aluminum has indexing pins for precise aiming. The optical plate locates every Reflector-Prism over an emitter, are inserted to the optical plate from above and are secured with a UV curing adhesive. The Reflector-Prisms are arrayed to produce IES Type II, III, IV, and V-SQ distributions. The entire Optical Module is field rotatable in 90° increments. Both module and drivers are factory wired using water resistant, insulated cord.

LED EmittersHigh output LED's are utilized with drive currents ranging from 350mA to 700mA. 70CRI Minimum. LED’s are available in standard Neutral White (4000K), or optional Cool White (5000K) or Warm White (3000K). Consult Factory for other LED options.

LED DriverConstant current programmable electronic with a power factor of >.90 and a minimum operating temperature of -40°F/-40°C. Driver(s) is/are UL and cUL recognized. In-line terminal blocks facilitate wiring between the driver and optical arrays. Drivers accept an input of 120-277V, 50/60Hz or 347V-480V, 50,60Hz. (0 - 10V dimmable driver is standard. Driver has a minimum of 3KV internal surge protection. Luminaire supplied with 20KV surge protector for field installation.)

Amber LED’sPCA (Phosphor Converted Amber) LED’s utilize phosphors to create color output similar to LPS lamps and have a slight output in the blue spectral bandwidth. TRA (True Amber) LED’s utilize material that emits light in the amber spectral bandwidth only without the use of phosphors.

FinishPolyester powder coat incorporates four step iron phosphate process to pretreat metal surface for maximum adhesion. Top coat is baked at 400°F for maximum hardness and exterior durability.

DSTP25 Patent pending

DSTP20Patent pending

®

25"635mm

20"508mm

17"432mm

15"381mm

(Formerly DSTP1)

SOLID STATE AREA L IGHTING

DSTP SERIES - VLEDPROJECT NAME:

FIXTURE TYPE:

660 West Avenue O, Palmdale, CA 93551Phone (661) 233-2000 Fax (661) 233-2001www.usaltg.com

U.S. Pole Co Inc. 2020058

Page 2: SOLID STATE AREA LIGHTING DSTP SERIES - VLEDLED Count Source Type Source Initial Lumens L70 greater than (HR) Starting Temp. System Watts Volts Max Input Amps 120 277 347 120 277 347

SPECIFICATIONS

Wall Mount LED Power Array™ ModulesMounting Styles

DSTP25 E.P.A.= 1.17Available in:120 LED Module Max

.50" dia. (13mm)(4) holes

5.5"(140mm)

5.5"(140mm)

7" sq. (178mm)

Fixture

DSTP25 18"(457mm)

A B

17"(432mm)

25"(635mm)

DSTP20 14"(356mm)

C

B

C

A

Wall Plate

XPD3" I.D.

Arms are heavy wall extruded aluminum construction. For additional arm options see arm section.

XPS

24"(610mm)

42"(1067mm)

42"(1067mm)

3" I.D.

24"(610mm)

XPK

42"(1067mm)

3" I.D.

24"(610mm)

DSTP20 E.P.A.= 0.70Available in:80 LED Module Max

Extruded aluminum arm and cast aluminum wall bracket assembly provided with built in gasketed wire access for fixture/supply wire connection.

20"(508mm)

15"(381mm)

Spec/Order Example: DSTP25/VLED-III-W/120LED-525mA/CW/347/1/RAL-8019-S

®

80 LED Module

120 LED Module

WM

Wallmount

1

XPK

XPD

XPS

DSTP20-VLED(Formerly DSTP1)

DSTP25-VLED

Dark BronzeRAL-8019-T

GreenRAL-6005-T

WhiteRAL-9003-T

GreyRAL-7004-T

BlackRAL-9005-T

See USALTG.COM foradditional arm styles

Other LED ColorsAvailable

Consult Factory

# of LEDs

DSTP25

100LED1

80LED

64LED

120LED1

DSTP20

80LED1

64LED

48LED

ColorTemp - CCT

DriveCurrent

NW (4000K)**Standard

CW (5000K)

WW (3000K)

120

208

240

347

480

277

Luminaire

Luminaire Optics LED Voltage Mounting Finish Options

Optics LED Mode MountingVoltage Finish Options

Type III VLED-III

Type II VLED-II

Type IVVLED-IV

Type V Med.VLED-V-SQ

StandardTextured Finish

700mA

525mA

350mA

Amber2

Phosphor Converted AmberPCA

True Amber1

TRA

For smooth finish replace suffix “T”

with suffix “S”(Example: RAL-9500-S)

Consult factor for custom colors

Photo Cell + Voltage(Example: PC120V)

Double Fuse(208V, 240V)

Single Fuse(120V, 277V)

Internal House Side Shieldsinc. LED Count(Example: HS-VLED/48)

Twist Lock ReceptableOnly

High-Low Dimming for Switch by Others/Select Levels 50/100 or 25/100(Example: HLSW/25)

7-Pin Twist LockReceptable Only

PC+V

SF

DF

HS-VLED

TPR

HLSW

TPR7

Stem Mount + Length(in)(48" Max)

Chain Mount + Length(in)(48" Max)

SM+L

CM+L

Remote Motion SensorConfigurator

Programmable Photo/Motion Sensor(Factory - Motion 50/100;Photo 75fc)

MS-FC10

MS-F211

IES Distribution Type

NOTES:

1 - Available in 350mA & 525mA Drive Currents only

2 - Narrow band Ambers have no definable CCT equivalent

DSTP SERIES - VLED

660 West Avenue O, Palmdale, CA 93551Phone (661) 233-2000 Fax (661) 233-2001www.usaltg.com

U.S. Pole Co Inc.

ORDERING INFORMATION

Page 3: SOLID STATE AREA LIGHTING DSTP SERIES - VLEDLED Count Source Type Source Initial Lumens L70 greater than (HR) Starting Temp. System Watts Volts Max Input Amps 120 277 347 120 277 347

LEDCount

SourceType Source

InitialLumens -

5000K CCT

InitialLumens -

3000K CCT

InitialLumens -

4000K CCTL70 greaterthan (HR)

StartingTemp.

System Watts Volts Max

Input Amps

DSTP20

48 WhiteLED

WhiteLED

WhiteLED

WhiteLED

WhiteLED

WhiteLED

WhiteLED

WhiteLED

WhiteLED

WhiteLED

WhiteLED

WhiteLED

WhiteLED

WhiteLED

WhiteLED

WhiteLED

WhiteLED

WhiteLED

WhiteLED

6169 -6558

5860 -6230

6478 -6886 90,000+ 53/59

48 8494 -9031

8069 -8579

8919 -9482 90,000+ 77/83

48 10635 -11307

10103 -10742

11167 -11872 90,000+ 103/109

64 8225 -8338

7813 -7921

8636 -8755 90,000+ 69/75

64 11325 -11481

10759 -10907

11891 -12055 90,000+ 102/108

80 9675 -9808

9191 -9317

10159 -10298 90,000+ 87/93

80 13189 -13370

12529 -12701

13848 -14038 90,000+ 127/133

48 6169 - 6558

5860 - 6230

6478 -6886 90,000+ 53/59

48 8494 -9031

8069 - 8579

8919 -9482 90,000+ 75/81

48 10635 -11307

10103 -10742

11167 -11872 90,000+ 105/111

64 8225 - 8745

7813 -8308

8636 -9183 90,000+ 71/77

64 11325 -12042

10759 - 11440

11891 -12644 90,000+ 103/109

64 13190 -13824

12531 -13133

13849 -14516 90,000+ 140/146

80 9675 -10286

9191 -9772

10159 -10801 90,000+ 87/93

80 13189 -14023

12529 -13322

13848 -14724 90,000+ 127/133

80 16487 -17280

15662 -16416

17311 -18144 90,000+ 173/179

100 11776 -12304

11187 -11689

12365 -12919 90,000+ 108/114

100 16291 -17025

15476 -16174

17106 -17877 90,000+ 160/166

120 14129 -14765

13423 -14027

14836 -15503 90,000+ 129/135

0.44/0.490.19/0.210.15/0.17

0.64/0.690.28/0.30.22/0.24

0.86/0.910.37/0.390.3/0.31

0.58/0.630.25/0.270.2/0.22

0.85/0.90.37/0.390.29/0.31

0.73/0.780.31/0.340.25/0.27

1.06/1.110.46/0.480.37/0.38

0.44/0.490.19/0.210.15/0.17

0.63/0.680.27/0.290.22/0.23

0.88/0.930.38/0.40.3/0.32

0.59/0.640.26/0.280.2/0.22

0.86/0.910.37/0.390.3/0.31

1.17/1.220.51/0.530.4/0.42

0.73/0.780.31/0.340.25/0.27

1.06/1.110.46/0.480.37/0.38

1.44/1.490.62/0.650.5/0.52

0.9/0.950.39/0.410.31/0.33

1.33/1.380.58/0.60.46/0.48

1.08/1.130.47/0.49 0.37/0.39

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C48 VLED® OpticalModule – 350mA

48 VLED® OpticalModule – 525mA

48 VLED® OpticalModule – 700mA

64 VLED® OpticalModule – 350mA

64 VLED® OpticalModule – 525mA

80 VLED® OpticalModule – 350mA

80 VLED® OpticalModule – 525mA

48 VLED® OpticalModule – 350mA

48 VLED® OpticalModule – 525mA

48 VLED® OpticalModule – 700mA

64 VLED® OpticalModule – 350mA

64 VLED® OpticalModule – 525mA

64 VLED® OpticalModule – 700mA

80 VLED® OpticalModule – 350mA

80 VLED® OpticalModule – 525mA

80 VLED® OpticalModule – 700mA

100 VLED® OpticalModule – 350mA

100 VLED® OpticalModule – 525mA

120 VLED® OpticalModule – 350mA

DSTP25

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

WhiteLED120 19549 -

2043018572 - 19408

20527 - 21451 90,000+ 192/198

1.6/1.650.69/0.710.55/0.57

120 VLED® OpticalModule – 525mA

-40°C120277347

DSTP SERIES - VLED LED/ Electrical Guide (pg. 1)

660 West Avenue O, Palmdale, CA 93551Phone (661) 233-2000 Fax (661) 233-2001www.usaltg.com

U.S. Pole Co Inc.

Page 4: SOLID STATE AREA LIGHTING DSTP SERIES - VLEDLED Count Source Type Source Initial Lumens L70 greater than (HR) Starting Temp. System Watts Volts Max Input Amps 120 277 347 120 277 347

LEDCount

SourceType Source Initial Lumens L70 greater

than (HR)StartingTemp.

System Watts Volts Max

Input Amps

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

48

DSTP25

PC Amber

PC Amber

PC Amber

PC Amber

PC Amber

PC Amber

PC Amber

PC Amber

PC Amber

PC Amber

PC Amber

PC Amber

PC Amber

PC Amber

PC Amber

PC Amber

PC Amber

PC Amber

59

86

115

80

114

97

142

60

84

118

80

116

157

98

142

194

121

179

0.490.210.17

0.720.310.25

0.960.420.33

0.670.290.23

0.950.410.33

0.810.350.28

1.180.510.41

0.500.220.17

0.700.300.24

0.980.430.34

0.670.290.23

0.970.420.33

1.310.570.45

0.820.350.28

1.180.510.41

1.620.700.56

1.010.440.35

1.490.650.52

6859 - 7189

5031 - 5349

6858 - 7292

8573 - 8986

6124 - 6398

8471 - 8853

3208 - 3410

4417 - 4696

5530 - 5880

4277 - 4547

5889 - 6262

3208 - 3410

4417 - 4696

5530 - 5880

4277 - 4547

5889 - 6262

5031 - 5349

6858 - 7292

48

48

48

64

64

80

80

48

48

64

64

64

80

80

80

100

100

48 VLED® OpticalModule – 350mA

48 VLED® OpticalModule – 525mA

48 VLED® OpticalModule – 700mA

64 VLED® OpticalModule – 350mA

64 VLED® OpticalModule – 525mA

80 VLED® OpticalModule – 350mA

80 VLED® OpticalModule – 525mA

48 VLED® OpticalModule – 350mA

48 VLED® OpticalModule – 525mA

48 VLED® OpticalModule – 700mA

64 VLED® OpticalModule – 350mA

64 VLED® OpticalModule – 525mA

64 VLED® OpticalModule – 700mA

80 VLED® OpticalModule – 350mA

80 VLED® OpticalModule – 525mA

80 VLED® OpticalModule – 700mA

100 VLED® OpticalModule – 350mA

100 VLED® OpticalModule – 525mA

51,000+

51,000+

51,000+

51,000+

51,000+

51,000+

51,000+

51,000+

51,000+

51,000+

51,000+

51,000+

51,000+

51,000+

51,000+

51,000+

51,000+

51,000+ -40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

-40°C

DSTP20

Phosphor Converted Amber LED

PC Amber

PC Amber

145

215

1.210.520.42

1.790.780.62

10166 - 10624

7347 - 7678120

120 120 VLED® OpticalModule – 525mA

120 VLED® OpticalModule – 350mA

51,000+

51,000+ -40°C

-40°C120277347

120277347

DSTP SERIES - VLED LED/ Electrical Guide (pg. 2)

660 West Avenue O, Palmdale, CA 93551Phone (661) 233-2000 Fax (661) 233-2001www.usaltg.com

U.S. Pole Co Inc.

Page 5: SOLID STATE AREA LIGHTING DSTP SERIES - VLEDLED Count Source Type Source Initial Lumens L70 greater than (HR) Starting Temp. System Watts Volts Max Input Amps 120 277 347 120 277 347

LEDCount

SourceType Source Initial Lumens L70 greater

than (HR)StartingTemp.

System Watts Volts Max

Input Amps

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

120277347

DSTP20

True Amber LED - 590nm

41

60

55

80

66

98

41

58

55

80

67

98

83

123

99

148

0.340.150.12

0.500.220.17

0.460.200.16

0.670.290.23

0.550.240.19

0.820.350.28

0.340.150.12

0.480.210.17

0.460.200.16

0.670.290.23

0.560.240.19

0.820.350.28

0.690.300.24

1.030.440.35

0.830.360.29

1.230.530.43

5834 - 6097

3379 - 3593

2887 - 3070

3936 - 4185

3514 - 3672

2454 - 2610

3379 - 3593

2887 - 3070

4861 - 5080

4216 - 4406

1841 - 1957

2535 - 2695

2454 - 2610

3936 - 4185

1841 - 1957

2535 - 2695

66,500+ -40°C

66,500+ -40°C

66,500+ -40°C

66,500+ -40°C

66,500+ -40°C

66,500+ -40°C

66,500+ -40°C

66,500+ -40°C

66,500+ -40°C

66,500+ -40°C

66,500+ -40°C

66,500+ -40°C

66,500+ -40°C

66,500+ -40°C

66,500+ -40°C

66,500+ -40°C

48

48

64

64

80

80

48

48

64

64

80

80

100

100

120

120

48 VLED® OpticalModule – 350mA

48 VLED® OpticalModule – 525mA

64 VLED® OpticalModule – 350mA

64 VLED® OpticalModule – 525mA

80 VLED® OpticalModule – 350mA

80 VLED® OpticalModule – 525mA

48 VLED® OpticalModule – 350mA

48 VLED® OpticalModule – 525mA

64 VLED® OpticalModule – 350mA

64 VLED® OpticalModule – 525mA

80 VLED® OpticalModule – 350mA

80 VLED® OpticalModule – 525mA

100 VLED® OpticalModule – 350mA

100 VLED® OpticalModule – 525mA

120 VLED® OpticalModule – 525mA

120 VLED® OpticalModule – 350mA

True Amber

True Amber

True Amber

True Amber

True Amber

True Amber

True Amber

True Amber

True Amber

True Amber

True Amber

True Amber

True Amber

True Amber

True Amber

True Amber

DSTP25

DSTP SERIES - VLED LED/ Electrical Guide (pg. 3)

660 West Avenue O, Palmdale, CA 93551Phone (661) 233-2000 Fax (661) 233-2001www.usaltg.com

U.S. Pole Co Inc.