GAGGIONE SAS – 3, Rue de la Rolland – 01460 Montréal la Cluse – France Tel : +33 (0)4 74 76 12 66 – Fax : +33 (0)4 74 76 76 77 – E-mail : lednlight@gaggione.com – Web : www.lednlight.com

Hybrid reflectors to be used with

SOLERIQ E45 datasheet

A Unique Optical Concept: Hybrid Reflector

This optical design provides optimization of Fresnel lens, transmittance surfaces and reflective surfaces (silver coating with protective layer). The reflector system used alone provides for very narrow beam applications and by adding specific windows broader light distributions are achieved.

Reflector

45mm

Or 70mm

Reflector +

Diffuser

Medium (2*15°)

Or

Super Large

(2*30°)

GAGGIONE SAS – 3, Rue de la Rolland – 01460 Montréal la Cluse – France Tel : +33 (0)4 74 76 12 66 – Fax : +33 (0)4 74 76 76 77 – E-mail : lednlight@gaggione.com – Web : www.lednlight.com

25/04/2012 Page 2 / 7

LednLight used with OSRAM SOLERIQ E45 Optical Characteristics, overview table

REFLECTOR REFLECTOR REFLECTOR REFLECTOR Ø70mmmmmmmm

LEDLEDLEDLED

halfhalfhalfhalf----angleangleangleangle at 50%at 50%at 50%at 50%

(°)(°)(°)(°)

halfhalfhalfhalf----angle angle angle angle at 10%at 10%at 10%at 10%

(°)(°)(°)(°)

EfficacityEfficacityEfficacityEfficacity Cd/LmCd/LmCd/LmCd/Lm

FasteningFasteningFasteningFastening

OSRAM SOLERIQ E45 17.4 48.2 1.5 Use M3 screw

+

OSRAM SOLERIQ E45 17.5 47.8 1.4

Use M3 screw

+

OSRAM SOLERIQ E45 18.8 47.1 1.2

Use M3 screw

+

OSRAM SOLERIQ E45 35.3 67.6 0.5

Use M3 screw

Angle Tolerance +/-10% // Values are subject to change to change without prior notice.

GAGGIONE SAS – 3, Rue de la Rolland – 01460 Montréal la Cluse – France Tel : +33 (0)4 74 76 12 66 – Fax : +33 (0)4 74 76 76 77 – E-mail : lednlight@gaggione.com – Web : www.lednlight.com

25/04/2012 Page 3 / 7

Optical characteristics and intensity distribution

Reflector LLR05N – OSRAM SOLERIQ E45

Measurements done with Ledgon 100 photogoniometer

• OSRAM SOLERIQ E45 @100mA

• medium beam

• Efficiency in candelas per lumen :

1.5 cd/lm (1.4cd/lm with neutral

diffuser LLD05N)

• Half-angle at 50% from Imax 17.4°

• Half-angle at 10% from Imax 48.2°

• Available in two fastening options

Ref LLR05N11AC1 using M3 screw

Optical characteristics and intensity distribution

Reflector LLR05N+LLD05M – OSRAM SOLERIQ E45

Measurements done with

Ledgon 100 photogoniometer

• OSRAM SOLERIQ E45 @100mA

• wide circular beam

• Efficiency in candelas per lumen : 1.2 cd/lm

• Half-angle at 50% from Imax 18.8°

• Half-angle at 10% from Imax 47.1°

• Available in two fastening options

Ref LLR05N11AC1 using M3 screw

GAGGIONE SAS – 3, Rue de la Rolland – 01460 Montréal la Cluse – France Tel : +33 (0)4 74 76 12 66 – Fax : +33 (0)4 74 76 76 77 – E-mail : lednlight@gaggione.com – Web : www.lednlight.com

25/04/2012 Page 4 / 7

Optical characteristics and intensity distribution

Reflector LLR05N+ LLD05S – OSRAM SOLERIQ E45

Measurements done withLedgon

100 photogoniometer

• OSRAM SOLERIQ E45 @100mA

• Super wide circular beam

• Efficiency in candelas per lumen : 0.5

cd/lm

• Half-angle at 50% from Imax 35.3°

• Half-angle at 10% from Imax 67.6°

• Available in two fastening options

Ref LLR05N11AC1 using M3 screw

When fixing the LED, Recommended M3 screw are round head screws ; do not use screws with head height more than 1.65mm

OK NO

H > 1.65 mm

H<1.65 mm

GAGGIONE SAS – 3, Rue de la Rolland – 01460 Montréal la Cluse – France Tel : +33 (0)4 74 76 12 66 – Fax : +33 (0)4 74 76 76 77 – E-mail : lednlight@gaggione.com – Web : www.lednlight.com

25/04/2012 Page 5 / 7

Mechanical characteristics LLD05N/M/S

Mechanical characteristics LLR05N (70mm)

All dimensions are in millimeters, general mechanical tolerance +/-0.15 mm (standard NF T 58 -000 cat. 4, reduced class) download the appropriate mechanical drawing file on our website www.lednlight.com

Dimension according to LED

package

GAGGIONE SAS – 3, Rue de la Rolland – 01460 Montréal la Cluse – France Tel : +33 (0)4 74 76 12 66 – Fax : +33 (0)4 74 76 76 77 – E-mail : lednlight@gaggione.com – Web : www.lednlight.com

25/04/2012 Page 6 / 7

Code form of LednLight reflector products

LLR01N11AC0

Ordering code for LednLight reflectors series To be used with OSRAM SOLERIQ E45

Framed Reflector

reflector

Ø 70mm

– narrow

Ø 70mm

– medium

Ø 70mm

–super large

Reflector LLR05N11AC1

Diffuser

LLD05N1

LLD05M1

LLD05S1

beam angle

N= narrow

M = medium

S = super large

AB = According to selected led OPTICAL

01=45mm standard

05=70mm

Coating material

1 =silver coating

Fastening mode

0= with pins

1 =using screw

product

R = Reflector

D = diffuser

LL=LednLight

Lens material

1 = Optical made of PC

GAGGIONE SAS – 3, Rue de la Rolland – 01460 Montréal la Cluse – France Tel : +33 (0)4 74 76 12 66 – Fax : +33 (0)4 74 76 76 77 – E-mail : lednlight@gaggione.com – Web : www.lednlight.com

25/04/2012 Page 7 / 7

FAQ

Q – Of what material are Lednlight reflectors made of? Where are they manufactured?

A – LednLight reflectors are made of a high purity grade PC, which guarantees a maximum high

temperature resistance. All our products are made in France. The coating is made of silver with a

protective layer which has very high reflection rate (>95%)

Q – What is Lednlight reflectors light efficiency?

A – Light efficiency depends on the reflector itself, and on the diffusive window as well as on the

selected LED. Light efficiency can vary from 75% to 90%.

Q – I would like to use a specific LED which is not mentioned in this datasheet. Is it possible?

A – LednLight reflectors have a versatile design that can work with several LEDs references, allowing the

user to choose the LED that best fits his needs. If your LED isn’t mentioned in this datasheet, you can

contact our engineering team which will give you more information.

Q – Can you provide CAD files of LednLight collimators and reflectors?

A – The optical design is confidential; however simplified CAD files are available. You can download

them on our website. IES files are also available.

Q – My project is very specific and Lednlight reflectors performances do not fit completely to my

technical requirements.

A – Our engineers can design a custom version of the Lednlight reflector just for you, that will best fit

your technical requirements, and at a very competitive price. Please do not hesitate to contact us to

discuss your specifications.

Q – I would like to ask you a question which is not in the FAQ. How can I contact you?

A – Please visit our website : http://www.lednlight.com or contact us by phone :

+33 (0) 4 74 76 12 66 or by email : lednlight@gaggione.com