Embed Size (px)
Citation preview
7/31/2019 Solarwatt m140-36 Get Ak Eng
http://slidepdf.com/reader/full/solarwatt-m140-36-get-ak-eng 1/2
SOLARWATT M140-36 GET AKMonocrystalline solar cells, 135 Wp - 140 Wp, Aluminium frame
SOLARWATT PROMISE
SOLARWATT ADVANTAGES
* For further information visit us on www.solarwatt.de
E N G L I S H
Quality Tested materials and thorough workmanshipguarantee high yields and system longevity.
Made in Germany SOLARWATT solar modules are exclusively producedin Germany.
Positive classication range (+0 Wp to +5 Wp) The actual module output is guaranteed to be up to5 Wp above the nominal value.
Optimum mechanical stability 4mm structured solar glass and 35mm frame ensurestability and torsional strength.
Clear identication provided by serial number engraved on front of frame
Waste is prevented thanks to the patented, resource-saving QUICKSTAXX® packaging systemIndependent tests conrm resistance to hail, ammonia, ame, and more*Take-back service and module recycling
Standard warranty 10 year product warrantystaggered performance warranty covering 25 years
Extended warranty by purchasingSOLARWATT Full Coverage insurance12 year product warrantylinear performance warranty covering 25 yearsAccording to the „Special warrant y conditions for SOLARWATT solar modules“
SOLARWATT WARRANTY
SOLARWATT AG
Maria-Reiche-Str. 2a01109 Dresden, GermanyTel. +49 351 8895-0Fax +49 351 [email protected]
Certied acc. to:
DIN EN ISO 9001 und 14001
7/31/2019 Solarwatt m140-36 Get Ak Eng
http://slidepdf.com/reader/full/solarwatt-m140-36-get-ak-eng 2/2
SOLARWATT M140-36 GET AK
1520 ± 2 mm
7 1 0 ±
2 m m
1 5 0 mm
Ø 9mm1000 ± 0,5 mm
GENERAL DATA Module technology Glas-foil-laminate; aluminium frame
Cover material EncapsulationBack material
High transparent solar glass (tempered), 4 mmEVA-solar cells-EVA
Multi-layer polymer sheet, white
No. and type of cells 36 monocrystalline solar cells
Dimensions of cells 156 x 156 mm
Cables and connectors tyco plug connector, cables 2 x 0,70 m/4 mm
Bypass-diodes 2
Application class Application cl ass A (nach IEC 61730)
Dimensions (LxWxH)
Weight
Max. system voltage
Mechanical RatingsSuction pressure of 2400 Pa approved
(Wind speed 130 km/h with safety factor 3)Load of 2400 Pa approved
QualicationsIEC 61215 Ed.2,
IEC 61730 (incl. Safet y class II)
ELECTRICAL DATA (STC) STC: Standard Test Conditions: measurement conditions: Radiation strength 1000 W/m2, spectraldistribu tion AM 1.5, temperature 25 2 °C, in accordance with EN 60904-3
Nominal power PN
Nominal voltage Umpp
Nominal current Impp
Open circuit voltage UOC
Short circuit current ISC
IR*Measuring tolerances Pmax±5 %;*Reverse current power rating: Operation of the modules with an external power source is only permitted with a string fuse with a release current of < 20 A.
Reduction in the module e ciency w ith reduction in radiat ion strength of 1000 W/m2 to 200 W/m2 (25°C): 4±2% (relative) / -0,6± 0,3% (absolute).
ELECTRICAL DATA (NOCT) NOCT: Normal Operation Cell Temperature, measurement conditions: Radiation strength 800 W/m2,AM 1.5, temperature 20 °C, wind speed 1m/s, electrical open-circuit operation
Nominal Power PN
Nominal voltage Umpp
Open circuit voltage UOC
Short circuit current ISC
THERMAL FEATURESOperating Temperature Range
Ambiente Temperature Range
Temperature Coe cient of PN
Temperature Coe cient of UOC
Temperature Coe cient of ISC
NOCT
[This data sheet conforms to DIN EN 50380:2003; 2011/11]
GLASS-FOIL-SOLAR MODULE | SOLARWATT AG |
Technical Data
DIMENSIONS
CHARACTERISTIC LINES Voltage charact. line at di erent irradiations and temperatures
S u
b j e c t t o c h a n g e w
i t h o u
t n o
t i c e .
performance class 140 Wp
135 Wp 140 Wp
18,3 V 18,4 V
7,40 A 7,63 A
22,0 V 22,1 V
8,56 A 8,59 A
20 A
98 W 101 W
16,7 V 16,8 V
20,4 V 20,5 V
6,89 A 6,91 A
-40 … +80 °C
-40 … +45 °C
-0,50%/K
-0,37%/K
0,03%/K
45°C
1526 x 716 x 35 mm
15 kg
1000 V (US 600 VDC)
30 4010 200
24
6810
0
Us [V]
I s [ A ]
1000 W/m2
800 W/m2
600 W/m2
400 W/m2
200 W/m2
30 4010 200
24
6810
0
Us [V]
I s [ A ]
0°C50°C 25°C70°C
50 50 60
