NIBE PV is an integrated solution which is based ona fully modular system with eight basic sizes:3, 6, 9, 12, 15, 18, 21 & 24 kW. Each size consistsof a number of base package with 10 panels and anominal power of 3 kW, mounting parts and a suit-able inverter with communication module, all ofwhich are ready for installation.

NIBE PV comprises of monocrystalline silicon cellpanels which use PERC technology, with an outputof 300 Wp. The solar panels are elegant, all-blackpanels. NIBE PV harnesses sunlight all year roundand converts it into electricity. NIBE PV can beconnected to your NIBE heat pump* for maximumenergy efficiency.

Thanks to smart technology, the product gives youcontrol over your energy consumption and will be akey part of your connected home. The efficient con-trol system automatically adjusts the indoor climatefor maximum comfort, and you do nature a favourat the same time.* applies to systems which can be connected to NIBE Uplink.

• Flexible modular system with eight basic sizeswhich can be easily expanded.

• Elegant, all-black panels which use PERCtechnology for maximum efficiency.

• Connect to a NIBE heat pump formaximum energyefficiency.

IT'S IN OUR NATURE NIBE.EU

Solar packageNIBE PV

Principle

LEK

LEK

4 532

HB I JF JF HB 2 11 H1 IB 5L

16 7 8 9 10 11 2 TR HK

AIA 566

LEK

LEK

LE

K

Internet

UN

Solar panels EME 20

Heat pump

Inverter

SMO 20

NIBE Uplink

Electricaldistribution unit

Energy meternetwork owner

Energy meterown use

Own usedomestic electricity

On the reverse of the solar panels there is a factory in-stalled connection box prepared with wiring for positiveand negative connections. The cables are fitted withquick-release connectors.

The electrical cables between the panels and the invertermust be double insulated and UV/weather-resistantPhotovoltaic cables, 4 mm² up to 100 m length (notsupplied).

The inverter is connected and fused to group central asthough it were a load with the same output. The inverterincludes a factory-fitted 300 mA earth-fault breaker. Ifthe inverter is to be connected to an external earth-faultbreaker, this must be 300 mA or larger.

On an annual basis, you obtain the maximum possiblebenefit from your solar cell package when it is used to-gether with a NIBE heat pump. The heat pump’s energyconsumption is often halved or even neutralised.

NIBE PV connected to your NIBE heat pump via a sup-plied communication module, which in turn can beconnected to NIBE Uplink. This system solution means

that the inverter’s information is shown in the heatpump. Thanks to smart technology, this system solutionprovides youwith control over your energy consumptionvia NIBE Uplink.

With the heat pump’s efficient control system and smartcommunication, the heat pump can adapt to the freesolar energy that is produced.

The surplus portion is supplied to the national grid foruse in the neighbourhood.When you produce your ownsolar electricity from solar cells, you are producing re-newable energy without any emissions, and with noworry about rising electricity prices.

2 NIBE PV Solcellspaket

IT'S IN OUR NATURE

This is how NIBE PV works

EXAMPLES OF POSSIBLE COMBINATIONSPER TEN PANELS

Specially adapted roof brackets for tiled roofs, sheetmetal roofs, felt roofs or seamed sheet metal roofs. Thetype of roof bracket to be used must be specified whenordering. If the panels are installed in a different forma-tion, additional mounting materials may be required.

FUNCTIONS

NIBE UplinkWith NIBE Uplink and the Internet, you canobtain a quick overview and the current statusof the solar panel system on your property. You

obtain easy-to-grasp and good supporting data, whereyou can see the current power and the history. In theevent of any malfunction, you also receive an alarm dir-ectly to your e-mail, which allows you to take counterac-tion quickly.

This is included if you already have a NIBE machine thatcan handle NIBE Uplink. If you want to use NIBE Uplinkbut do not already have a NIBE machine, SMO 20 canbe used.

For communication with SMO 20, cable part no. 718576is required (ordered separately).

INSTALLATION

GeneralThe installation must only be carried out by competentpersonnel.

The enclosedmaterials are those required for the install-ations described in this product sheet. In special cases,they may need to be supplemented. If you are unsure,contact your supplier. Information regarding applicablestandards and regulations must be obtained prior to theinstallation and commissioning of the solar panel system.

Mounting

Each package can be expanded with additional panels,or you can choose not to install any panels. This deliversextremely good flexibility, allowing attractive roof install-ation. If you need a larger installation, it is perfectlypossible to expand it. In this case, you select multiplesof e.g. 24 kW, which produces an installation of e.g. 240kW. This can be done easily thanks to the modular sys-tem, and you will then need 10 x 8 basic kits, 10 x invert-ers and 10 x 8 sets of roof brackets.

Example

6 kW package installed on roof that is expanded by e.g.four solar panels (7.2 kW)

LEK

LEK

LEK

LEK

NIBE PV Solcellspaket 3

IT'S IN OUR NATURE

6 kW package installed on roof where you have decidednot to install e.g. two panels (5.4 kW).

LEK

LEK

Number of solar panels per string and per package

The table shows how many panels you can have perstring, as well as how many panels are standard andhow many the inverter can cope with. The inverter hasdual trackers, allowing the installation of different num-bers of panels per string. If the number of panels is notsufficient to achieve the minimum number for twostrings, you have to install all the panels in one string.

String = a number of panels connected in series.

Max.total

Min.total

Std./no.

Max./string

Min./string

Inverter for:

146101041.8 – 4.2 kW2515201884.5 – 7.5 kW35263021127.8 – 10.5 kW423640211410.8 – 12.6 kW634350**2x211412.9 – 18.9 kW806080*2x21*2x1518 – 24 kW

*"2 equally long strings per input/tracker".

**"Tracker one can manage one string or two equally long strings"

Extra ceiling brackets are added when expanding.

4 NIBE PV Solcellspaket

IT'S IN OUR NATURE

Supplied componentsPVK BASIC KIT 10-10

LEK

Monocrystalline silicon cell panels 10 pcs

Aluminium rails, 2.1 metres 10 pcs

Aluminium joints 20 pcs

Mountings for solar panels (assembly clamps) 24 pcs

Connectors for electrical connection between the panelsand inverter, male and female, (electrical cable not in-cluded) 4 + 4 pcs

PV cable with pre-installed connectors 7 metres 2 pcs

PVI INVERTER 10-XX

LE

K

Inverters 1 pcs

EME 20 1 pcs

CEILING BRACKET PRM XX-20, 20 PCS.(AVAILABLE FOR FIVE DIFFERENT CEILINGTYPES)

Tiled roof PRM 11-20

Sheet metal roof PRM 21-20

Felt roof PRM 41-20

Seamed sheet metal roof PRM 31-20

Universal for aluminium rails PRM 51-20Lower section for the ceiling bracket is not supplied byNIBEAdditional fastening for the relevant ceiling type is re-quired

NIBE PV Solcellspaket 5

IT'S IN OUR NATURE

Good to know about NIBE PV

Material matrix solar package24 kW / 8021 kW / 7018 kW / 6015 kW / 5012 kW / 409 kW / 306 kW / 203 kW / 10Power / Solar panels

87654321PVK basic kit 10-1087654321Roof brackets PRM

XX-201PVI inverter 10-3

1PVI inverter 10-61PVI inverter 10-9

1PVI inverter 10-1211PVI inverter 10-15

11PVI inverter 10-24

Included components in PVK basic kit 10-10Material

10 xMonocrystalline silicon cell panels10 xAl rails, 2.1 metre10 xRail connectors24 xAssembly clamps

4 + 4 xConnectors for electrical connection between the panels and inverter, females + males (electrical cable notincluded)

2 xPV cable with pre-installed connectors 7 metres

If the panels are installed in a different formation than that shown in the example, additional mounting materials may be required.

6 NIBE PV Solcellspaket

IT'S IN OUR NATURE

24 kW21 kW18 kW15 kW12 kW9 kW6 kW3 kWSolar panel300WpRated output at

STC (Pmpp)32.26VRated voltage

(Umpp)9.30ARated current

(Impp)1650x991x35mmExternal; dimen-

sions (LxWxH)Anodised blackVersion with

aluminium frame19kgWeight

2x1000mmConnection cableswithpre-installed con-nectorsPVK basic kit 10-10

057 180Part No.PVI 10-24PVI 10-15PVI 10-12PVI 10-9PVI 10-6PVI 10-3Inverter

516x650x203516x474x192347x432x145mmOuter dimensions(WxHxD)

392414kgWeight42Max. number of

stringsWhiteColour2Number of trackers

(MPPT)IP65Enclosure class

403220161616ARec. fuse rating057 204057 230057 203057 202057 201057 200Part No.

EME 20 (included in inverter PVI 10)81x81x28mmExternal; dimen-

sions (LxWxH)IP22Enclosure class

057 188Part No.Roof brackets 20 pcsPRM 11-20 (Roof bracket, tiled roof)

057 207Part No.PRM 21-20 (Roof bracket, sheet metal roof)

057 208Part No.PRM 41-20 (Roof bracket, felt roof)

057 209Part No.PRM 31-20 (Roof bracket, seamed sheet metal roof)

057 210Part No.PRM 51-20 (Ceiling bracket universal for aluminium rails). Lower section for the ceiling bracket is not supplied by NIBE

057 227Part No.

NIBE PV Solcellspaket 7

IT'S IN OUR NATURE

Technical specifications

NIBE Energy SystemsBox 14, SE-285 21 Markarydnibe.eu

PBDEN19

05-2

M11

989

This product sheet is a publication from NIBE Energy Systems. All product illustrations,facts and data are based on current information at the time of the publication’s approval.NIBE Energy Systems makes reservations for any factual or printing errors in this productsheet.

©2019 NIBE ENERGY SYSTEMS

WS name: -GemensamtWS version: a631WS release date: 2019-02-22 11:20Publish date: 2019-03-05 14:47