Embed Size (px)
Citation preview
Features
Powerful Pump
dry, self-priming impeller pump that requires no initial filling prior to operation
glycol resistant Perbunan impeller
capable of transporting air within the fluid - important when flushing or removing air from solar loops
pump chamber drains completely - no leakage during transport.
multi-purpose pump designed for a wide range of applications and fluids
Rugged Cart
Temperature-resistant Hose
temperature resistant hose from -40° F to 340° F
hose bracket for orderly hose storage
high precision interlock connector prevents residual liquids from leaking during transportation
8 Gallon Tank
blocking valve at the tank outlet.
easily removable tanks for cleaning with wide opening screw cap
interchangeable tanks when using different heat transfer fluids, replacement tanks can be ordered individually
suitable for mixing heat transfer fluids on-site (with optional accessories)
Fine Filter
soldering or welding residues filtered out by built in fine filter during solar loop flush
large clear plastic panel in filter enclosure enables detection of air bubbles and debris in the tube
only available on ZUWA devices
Drain Valve
manual drain valve behind pump outlet enables discharge line drainage after use - therefore, hoses can be easily and quickly disconnected from the fittings
easy to handle with large pneumatic wheels - suitable for rough building sites or stairs
The Solarcheck Mobile Center manufactured by ZUWA is used for servicing solar thermal systems and is designed to meet the requirements of HPAC engineers and installers. Quick and accurate filling of solar systems with heat transfer fluids. The compact unit includes the pump, hoses, cart, and tank.
Solarcheck Mobile Center UNISTAR 2000-A
Save time filling solar collectors by up to 50%Flush, vent and fill solar collectors in just one step
ZUWA Pumps – Made in Germany Supplied by:Alpha Thermal Systems Inc. 929 School Street • Webster, Mass 01570 Phone 508 943 6000 • Fax 508 949 2564 [email protected] www.alphathermalsystems.com
type dry self-priming impeller pump with Perbunan impeller(max. dry run 1 minute)
housing/cover aluminium ALMgSi 1 (optional stainless steel / AISI 316)
max. flow rate 8 gallons per minute
max. pressure 60 psi
hose 2 x 6.5 feet ½“, temperature resistant up to 340°F
max. temperature max. temperature for permanent operation 176°F
power 0.37 kW
motor 110 V with thermal motor protection, on/off switch, 6.5 feet cable with US plug
Pump *
Cart *material robust welded chassis, powder-coated steel
dimensions H x W x D = 39” x 19.5” x 21”
tank 46 pounds (empty tank)
weight UV-stabilized PE tank with wide lock-up opening and blocking valve at the outlet
* with suction-, pressure- and flush hose
* additional tanks available, with blocking valve and pump connections
capacity indicator stop valve fine filter and drain valve
Technical Specifications
www.zuwa.de
