S o l a r C a b l e S o l u t i o n s

PV MODULE SOLUTIONS

PART NO.100 PACK BULK PACK

NAME DESCRIPTION IMAGE

S6405

S6490

S6407

S6443

S6406

S6436

S6439

S6448

S6460

S6445(4000 PCS)

S6495(4000 PCS)

S6447(3000 PCS)

S6483(2000 PCS)

S6446(4000 PCS)

S6476(3000 PCS)

S6479(2000 PCS)

S6488(3000 PCS)

S6500(2000 PCS)

SunRunner Clip

SunRunner 316 Clip

SunRunner EZ Clip

SunRunner 4 Clip

SunRunner 90 Clip

SunRunner 90-2 Clip

SunRunner 90-4 Clip

Sunrunner 2-S Clip

SunRunner Vidrio Clip

1 or 2 cable PV. Clips onto frames between 1.5 - 2.3 mm.

For standard applications.

1 or 2 cable PV. Clips onto frames between 1.5 - 2.3 mm.

316 Stainless Steel for high salt air applications.

1 or 2 cable PV. Designed for thicker panels. Clips onto

frames between 2.3 - 6.4 mm.

4 cable PV, Solaredge or �at trunk cable. Designed for thicker panels. Clips onto

frames between 1.5 - 3.3 mm.

900 single cable PV. Clips onto frames between 1.5 - 3.3 mm.

900 two cable PV. Right angle design for modules in

landscape mode. Clips onto frames between 1.5 - 3.3 mm.

900 four cable PV or �at trunk cable.

Round trunk cable clip. Rail-less systems.

Holds up to 2 x SolarEdge or 1 x Enphase Q cables. Holds

with compression force only for frameless PV modules.

SunRunner 90 Cable Clips

• Mounts at a 90° angle to the original SunRunner.

• Holds a single cable from 5.1 - 8.3 mm; SunRunner 90-2 holds 2 of these cables; SunRunner 4 holds 4 cables from 7.6 to 5.1 mm.

• Designed for use with PV modules mounted in the “landscape” mode. PV modules with shorter than normal junction box cables cannot be dressed out to the sides of the module.

• Allows the junction box cables to be run to the adjacent modules across the short side of the PV module frame.

• SunRunner 90-4 made of 0.50 mm thick, heat treated 410 stainless steel.

• SunRunner 90 & SunRunner 90-2 made of 0.6 mm thick, 304 stainless steel.

SunRunner EZ Cable Clip

• Robust "double-compression" design securely holds from 1 x 12 gauge USE-2, to 2 x 10 gauge PV-1000V solar wires.

• Also for use with other cables from 5.1 - 8.3 mm in diameter.

• Locking tabs securely fasten clips to module extrusions, or other panels.

• Screwdriver slot for easy removal or movement of clips if necessary.

• Made from 0.6 mm thick, corrosion resistant 304 stainless steel. 316 stainless steel version is available for marine and other harsh environments.

• SunRunner EZ's are designed for thicker module frames as well as racking - accommodates pro�les up to 6.4 mm thick.

Certi�cation - Certi�ed by UL for Compliance with both Canadian and US Requirements under File E54523.

20 Year Solar Warranty - selected parts are covered by our 20 year warranty. Contact us for details.

PART NO.100 PACK BULK PACK

NAME DESCRIPTION IMAGE

S6505

S6504

S6404

S6401

S6402

S6463

S6461

S6462

S6545(2000 pcs)

S6544(2000 pcs)

S6444(2000 pcs)

S6441(2000 pcs)

S6422(2000 pcs)

S6473(2000 pcs)

S6471(2000 pcs)

S6472(2000 pcs)

SunRunner 4-2U Clip

SunRunner 4-2 Clip

SunRunner 2 Clip

SunRunner 2-U Clip

SunRunner 2-R Clip

SunRunner 2-UVX Clip

SunRunner 2-U- UVX Clip

SunRunner 2-R- UVX Clip

For Unirac, IronRidge and similar pro�les. Holds up to 4 SolarEdge

or 3 Enphase Q cables.

For Everest, SnapNrack and similar pro�les. Holds up to 4

SolarEdge or 3 Enphase Q cables.

Everest, SnapNrack and similar pro�les. Holds round trunk cable.

Unirac, Ironridge & similar rack pro�les.

S:Flex, Renusol & similar rack pro�les.

Everest, SnapNrack and similar pro�les. Holds nylon round

trunk cable.

Unirac, Ironridge & similar rack pro�les. Holds nylon round

trunk cable.

S:Flex, Renusol & similar rack pro�les. Holds nylon round

trunk cable.

TOP RAIL CLIPS

SunRunner 2 Series Cable Clips • Holds Micro-Inverter cables 10.5 - 12.0 mm dia.• Made from 0.5 mm thick, heat treated 410 stainless steel.• “S” hook clip design will �t a wide variety of

extruded aluminum pro�les.• SunRunner 2 is designed for mounting frames such

as the ones used by Unirac, Solar Mount and Mounting Systems.

• SunRunner 2-R is designed for racking systems such as the ones used by Haticon Solar.

• SunRunner 2-U features a shorter S hook for Unirac and other similar frame pro�les.

SunRunner 4-2 and 4-2U Cable Clips

• Holds Micro-Inverter oval cables 6.3 x 9.8 mm.

• Made from 0.5 mm thick, heat treated 410 stainless steel.

• "S" hook clip design will �t a wide variety of extruded aluminum pro�les.

• SunRunner 4-2 is designed for mounting frames such as the ones used with Everest, SnapNrack and similar extrusions.

• SunRunner 4-2U features a shorter S hook for Unirac, IronRidge and similar frame pro�les.

OTHER WIRE MANAGEMENT SOLUTIONS FOR SOLAR INSTALLATIONS

PART NO.100 PACK BULK PACK

NAME DESCRIPTION IMAGE

S6520 S6560(1000 pcs)

Helios UVX ClipInstalls into a 6.5 mm mounting

hole and holds up to 2 cables between 5.8 - 8.0 mm.

S6434 S6474(4000 pcs)

SunRunner CTCable tie mounting platforms. No

need for mounting holes or adhesives.

Use with steel & nylon cable ties.

CT version - for panels 1.5 - 3 mmCT-EZ version - for panels 3 - 6.4 mm

SunRunner CT-EZS6435 S6475(4000 pcs)

SUNSCREEN KIT

36 SunScreen Clips (Part no. S6437) bundled together with a 30 m roll of SunScreen Wire Mesh.

KIT NO.

S6465

S6467

S6469

CLIP QTY

36

36

36

MESHWIDTH (mm)

102

152

203

LENGTH (m)30

30

30

� � � � �� � � �

Other cable ties also available in 316 stainless steel:

Ladder-Type Universal Clamping Wing Lock Type Banding 30 m rolls

SOLAR POWER COMPONENTS USED IN TYPICAL GRID-TIED PV SYSTEM

������������

�����

���

���

���

��

��

���

��

Sun

Ru

nn

er

4Su

nR

un

ne

rC

T-EZ

Sun

Ru

nn

er

CT

Sun

Ru

nn

er

EZ

Sun

Bu

nd

ler

Sun

Ru

nn

e

Sun

Ru

nn

e 90

Sun

Ru

nn

e 90-4

Sun

Ru

nn

e 90-2

Sun

Ru

nn

e rrr r r V

idrio

Sun

scree

ner

CPV

Connectors

for PanelInterconnections

Cordgrips or CPV Connectors w

ith Bulkhead Connectors

���������

��������

��� � �� ����� �

��������

��������

������������ ��

�����

���������

�������������

���� �� ���

��� ���

������������������ ���

� ­�����������������������

��������

� ��

����������

������

Cordgrips or CPV Connectors w

ith Bulkhead Connectors

��������

������ ��

��������

Note: For m

icro-inverter installations the SunRunner 2, 2-R and 2-U are

available for Enphase power cable routing.

SunBundler���������� ��������

Connectors w

ith Conduit

YO

UR

CU

ST

OM

DE

SIG

NE

D C

LIP

HE

RE!

Consult us

for clips to meet your

specific rack profile

���� ��������� ��

����������

NPA PT Y LTD10 Gray Street, Kilkenny SOUTH AUSTRALIA 5009

Tel: +61 8 8268-2733 | Fax +61 8 8268-1455 | sales@npa.com.au | www.npa.com.au

NPA PTY LTD operates a QUALITY

MANAGEMENT SYSTEM which

complies with ISO 9001:2015

NPA PTY LTD is 100% Australian owned and operated.

CRIMP LOCK PVC COATED STAINLESS STEEL WIRE CABLE TIES

Extremely durable, vinyl jacketed Stainless Steel Cable Tie.

Smooth vinyl jacketing prevents damage to installation cable insulation and provides excellent for solar durability.

Use standard wire cutters to both crimp the sleeve and cut the excess wire.

Made of commercial aircraft-grade 302/304 stainless wire with UV protected vinyl jacket.

Temperature Range: -40°C to 105°C

Max Tensile Strength: 440 N

PART NO.100 PACK 1000 PACK

NAME MAX BUNDLE DIAM. (mm)

PART DIMENSIONS

S6408

S6410

S6412

S6414

S6420

S6545

S6544

S6444

S6441

S6422

SunBundler 8

SunBundler 10

SunBundler 12

SunBundler 14

SunBundler 20

58.4

74.2

98.6

106.7

161.5

LENGTH (mm) DIAMETER (mm)

203

254

305

356

508

1.6

1.6

1.6

1.6

1.6

NYLON 12 CABLE TIES

Excellent resistance to heat and to a wide temperature range.

Una�ected by variations in humidity. They retain their mechanical characteristics when used in dry weather.

Resistant to chemical agents and ultraviolet light.

Easier to install thanks to lateral teeth. Smaller sizes have a longer tail for easier picking up.

Temperature Range: -50°C to 150°C

Pack Size: 1000

PART NO. LENGTH (mm)

42176

42177

42178

42179

42180

42181

42182

42183

42185

42187

WIDTH (mm)

180

290

360

180

255

350

132

180

265

360

6

6

6

8

8

8

9

9

9

9

SOLAR POWER COMPONENTS LABKIT #9

Part No. 3000

LabKits are perfect for product design departments, experimental labs, and for all prototype work.

The Solar Power Components LabKit #9 contains an assortment of our most popular Solar Panel Connectors, Cordgrips, Clips and other accessories.

Parts in LabKits are available in various sizes and colors. Please call us for further information.

Use Our Labkits!