Upload
others
View
13
Download
0
Embed Size (px)
Citation preview
Soil Chemistry
SOIL CHEMISTRY is an important segment of soilscience. It deals with the composition and
properties of soil. In agriculture, there is specialinterest in how soil chemistry affects plant growth.Basic concepts of soil chemistry are presented in thisunit.
Objective:
� Explain aspects of soil chemistry.
Key Terms:
� acid
alkaline
anion
cation
cation exchange capacity
colloids
ion
lime requirement
soil fertility
soil pH
Basic Concepts of Soil Chemistry
Soil is a complex material that supports plant and animal life. An important aspect of soil is
the chemistry within the soil. Soil fertility and productivity are closely linked to soil chemistry.
SOIL FERTILITY
Soil fertility is the ability of soil to provide nutrients for plant growth. Soil fertility
involves the storage of nutrients and refers to the availability of those nutrients for plants. Soil
E-unit: Soil Chemistry
Page 1 � www.MyCAERT.com
Copyright © by CAERT, Inc. — Reproduction by subscription only. E040077
fertility is vital to a productive soil. A fertile soil is not necessarily a productive soil. Poor drain-
age, insect pests, drought, and other factors can limit production, even when fertility is ade-
quate.
Existing soil-plant relationships affect soil productivity. External factors control plant
growth, such as air, temperature, light, mechanical support, nutrients, and water. With the
exception of light, plants depend on the soil, at least partly, for all these factors. Each directly
affects plant growth and is linked to the others. For instance, water and air occupy the pore
spaces in the soil. Therefore, factors that affect water also influence soil air.
SOIL pH
Soil pH is the measure of acidity or alka-
linity of the soil. A fourteen-point scale is
used to measure pH. A neutral pH is 7.0.
Any reading between zero and 7.0 is acid. A
pH of 1.0 indicates a very acid solution and
6.0 is considered slightly acid. A solution
with a pH between 7.0 and 14.0 is alkaline or
basic. A pH of 8.0 is slightly basic, and a
reading of 14 indicates a strong base. Most
plants grow well in soils with a pH ranging
from 5.5 to 7.0. Outside that range, some
nutrients are less available for plant use.
pH is determined by the concentration of
hydrogen (H+) ions and hydroxyl ions
(OH-) in the soil solution. A sample of pure
water has an equal number of H+ and OH-
and is neutral. A solution is acid when
hydrogen (H+) ions exceed hydroxyl ions
(OH-) in the soil solution. However, a solu-
tion is alkaline, or basic, when hydroxyl
ions (OH-) are in greater concentration than
hydrogen (H+) ions in the soil solution. The
more H+ or OH- ions held in solution, the
greater the soil’s acidity or alkalinity.
Soil pH measures H+ activity and is
expressed in logarithmic terms. The practical
significance of the logarithmic relationship is
that each unit change in soil pH means a
ten-fold change in the amount of acidity or
alkalinity. For example, a soil with a pH of
6.0 is 10 times as acid as one with a pH of
7.0.
E-unit: Soil Chemistry
Page 2 � www.MyCAERT.com
Copyright © by CAERT, Inc. — Reproduction by subscription only. E040077
pH Values Degree
8
9
10
11
12
13
14
7
6
5
4
3
2
1
0
NeutralBest rangefor mostplants
WeaklyAcid
WeaklyAlkaline
Acid
Alkaline
StronglyAcid
StronglyAlkaline
ExcessivelyAcid
ExcessivelyAlkaline
Alk
aline
Range
Acid
Range
FIGURE 1. A typical fourteen-point pH scale
Factors Affecting Soil pH
A number of factors affect soil pH. Soil can become more acidic or more alkaline, depend-
ing on certain conditions.
Organic matter influences soil pH. As soil organic matter decomposes, carbonic acid forms.
Carbonic acid reacts with Ca and Mg carbonates in the soil to form soluble bicarbonates,
which are leached away, leaving the soil more acidic.
As water from rainfall passes through the soil, basic nutrients, such as calcium and magne-
sium, are leached. These are replaced by acidic elements, including aluminum, hydrogen, and
manganese. Soils formed under high rainfall conditions are more acidic than those formed
under arid conditions.
Soils formed under forest vegetation tend to be more acidic than those developed under
grasslands.
Soils often become more acidic when crops are harvested, because bases are removed.
Legumes generally contain higher levels of bases than grasses. Legumes also release H+ ions
into their rhizosphere when actively fixing atmospheric nitrogen.
Except in low rainfall areas, acidity generally increases with depth, so the loss of topsoil by
erosion can lead to a more acid pH in the plow layer. The reason is that more subsoil is
included in the plow layer.
Nitrogen from fertilizer, organic matter, manure, and legume nitrogen fixation produces
acidity. Nitrogen fertilization speeds up the rate at which acidity develops. At lower nitrogen
rates, the acidification rate is slow, but it is accelerated as nitrogen fertilizer rates increase.
The overall effect of submergence is an increase of pH in acid soils and a decrease in basic
soils. Regardless of their original pH values, most soils reach a pH of 6.5 to 7.2 within one
month after flooding and remain at that level until dried.
Measuring Soil pH
The two most commonly accepted methods of measuring soil pH are indicator dyes and the
pH meter. Indicators are frequently used in the field to make a rapid pH determination and
must be used by a trained hand to
avoid major error. The more accurate
and widely used method in soil test-
ing laboratories is the pH meter.
Raising Soil pH
Lime is typically added to agricul-
tural soils to raise soil pH. Lime
requirement is the amount of agri-
cultural limestone needed to estab-
lish the desired pH range for the
cropping system being used. When
pH is measured, only active acidity in
E-unit: Soil Chemistry
Page 3 � www.MyCAERT.com
Copyright © by CAERT, Inc. — Reproduction by subscription only. E040077
FIGURE 2. Agricultural lime used to raise soil pH
the soil water is determined. Potential acidity held by the clay and organic matter must also be
considered. Lime requirement of a soil is related to the pH and also to its buffer capacity or
cation exchange capacity.
The total amount of clay and organic matter in a soil, as well as the kind of clay, will deter-
mine how strongly soils are buffered or how strongly they resist a pH change. Buffering capac-
ity increases with the amounts of clay and organic matter. Soils with a high buffering capacity
require more lime to increase pH than soils with a lower buffer capacity.
Factors Affecting Liming Frequency
The best way to determine if liming is necessary is to test the soil. The following are some
factors that influence frequency of liming:
� Soil texture is a factor. Sandy soils must be limed more often than clay soils.
� The rate of nitrogen fertilization plays a role. High rates of ammonium nitrogen generateconsiderable acidity.
� The rate of crop removal of nutrients influences the need for liming. Legumes removemore Ca and Mg than non-legumes.
� The amount of lime applied is a factor. Higher application rates usually mean the soilneed not be limed as often.
� The desired pH range is another factor. Maintenance of a high pH usually means thatlime must be applied more frequently.
E-unit: Soil Chemistry
Page 4 � www.MyCAERT.com
Copyright © by CAERT, Inc. — Reproduction by subscription only. E040077
ON THE JOB…
CAREER CONNECTION: Soil Scientist
Soil scientists study the upper portion of the earth’s crust. They focus on the physical and
chemical properties of soil, the distribution of soil, and biological components of soil. A soil sci-
entist must have a strong background in the physical and biological sciences and mathematics.
The soil scientist must have good observation skills to be able to analyze and determine the
characteristics of different types of soils.
Soil scientists do a wide variety of activities. Activities include conducting soil surveys, devel-
oping soil management plans, monitoring the effects of farming on soil productivity, advising
land managers of capabilities and limitations of soils, and evaluating nutrient and water availabil-
ity to crops.
Most soil scientists have earned at least a bachelor’s degree from a major agricultural univer-
sity. Many begin their education in the high school agriculture classroom and attend a local
community college.
Soil scientists are employed by federal and state governments, universities, and the private
sector.
HEL
PW
ANTE
D
Types of Liming Materials
Five materials used for liming are calcium oxide, calcium hydroxide, calcitic limestone,
dolomitic limestone, and marl.
Calcium oxide (CaO), also known as unslaked lime, burned lime, or quicklime, is a caustic
white powder, disagreeable to handle. It is manufactured by roasting calcitic limestone in a fur-
nace. When added to the soil, it reacts almost immediately.
Calcium hydroxide (Ca[OH]2), frequently referred to as slaked lime, hydrated lime, or
builder’s lime, is a caustic, white, powdery substance, difficult and unpleasant to handle. It is
prepared by hydrating CaO. Acid neutralization occurs rapidly when it is added to the soil.
Calcitic limestone (CaCO3) and dolomitic limestone (CaMg[CO3]2) are obtained through
open-pit mining. The quality of the lime depends on the impurities that the calcitic limestone
and dolomitic limestone contain, such as clay.
Marl is soft, unconsolidated deposits of CaCO3, occurring in many areas. It is mined by
dragline or power shovel after the overburden has been removed. Marl is almost always low in
Mg, and its liming value is inversely related to the amount of clay it contains.
SOIL COLLOIDS, IONS, AND THE CATION EXCHANGE CAPACITY
(CEC)
Soil colloids, ions, and the cation exchange capacity are important aspects in regard to soil
chemistry.
Colloids
As soils are formed during the weathering process, some minerals and organic matter are
broken down to extremely small particles called colloids. Chemical changes further reduce
these particles until they cannot be seen with the naked eye.
Colloids are primarily responsible for the chemical reactivity in soils. Mineral clay colloids
are plate-like in structure and crystalline in nature. In most soils, clay colloids exceed organic
colloids in amount. The kind of parent material and the degree of weathering determine the
kinds of clays present in the soil. Each colloid, clay and organic, has a negative (-) charge devel-
oped during the formation process. It can attract and hold positively (+) charged particles, as
unlike poles of a magnet attract each other. Colloids repel other negatively charged particles, as
like poles of a magnet repel each other.
Ions
An element with an electrical charge is called an ion. An ion with a positive charge is called
a cation. They are written in the ionic form. Examples are potassium (K+), sodium (Na+),
hydrogen (H+), calcium (Ca+), and magnesium (Mg++). An ion with a negative charge is
called an anion. Examples are chlorine (Cl-), nitrate (NO3-), sulfate (SO4
2-), and phosphate
(H2PO4-). Negatively charged colloids attract cations and hold them like a magnet holding
E-unit: Soil Chemistry
Page 5 � www.MyCAERT.com
Copyright © by CAERT, Inc. — Reproduction by subscription only. E040077
small pieces of metal. This characteristic explains why nitrate (NO3-) is more easily leached
from the soil than ammonium nitrate. Nitrate has a negative charge like the soil colloids, so it
is not held by the soil but remains as a free ion in the soil water to be leached through the soil
profile in some soils under certain rainfall conditions.
Cation Exchange Capacity
Cations held by soils can be exchanged with other cations. The total number of exchange-
able cations a soil can hold is called its cation exchange capacity, or CEC. The higher a
soil’s CEC, the more cations it can retain. The CEC depends on amounts and kinds of clay
and organic matter present. A high-clay soil can hold more exchangeable cations than a
low-clay soil. The CEC increases as organic matter increases. The CEC of a soil is expressed in
terms of milligram equivalents per 100 grams of soil and is written as meq/100g.
Clay soils with high CEC can retain large amounts of cations against potential loss by leach-
ing. Leaching is the loss or removal of materials from the soil. Sandy soils with low CEC retain
smaller quantities.
SOIL PRODUCTIVITY
Soil productivity can be affected by organic matter, soil depth, surface slope, soil organisms,
and nutrient balance.
Organic Matter
Soil organic matter consists of plant, animal, and microbial residues in various stages of
decay. Adequate organic matter levels benefit soil in many ways: they improve the physical
condition and tilth, they increase water infiltration, they decrease erosion losses, and they sup-
ply plant nutrients. Organic matter contains about 5 percent nitrogen, so it serves as a store-
house for reserve nitrogen. But
the nitrogen in organic matter is
in organic compounds and is not
immediately available for plant
use, since decomposition usually
occurs slowly.
Fertilizer nitrogen is needed to
assure non-legume crops an ade-
quate source of readily available
nitrogen. Soil organic matter con-
tains other essential plant ele-
ments. Plant and animal residues
contain variable amounts of min-
eral elements, such as phospho-
rus, magnesium, calcium, sulfur,
and micronutrients.
E-unit: Soil Chemistry
Page 6 � www.MyCAERT.com
Copyright © by CAERT, Inc. — Reproduction by subscription only. E040077
FIGURE 3. Soils rich in organic matter are often dark in color.
Soil Depth
Soil depth may be defined as the depth of soil material favorable for plant root penetration.
Deep, well-drained soils of desirable texture and structure are favorable to crop production.
Plants need plenty of depth for roots to grow and to secure nutrients and water. Roots will
extend 3 to 6 feet or more when soil permits. Rooting depth can be limited by physical and
chemical barriers, as well as by high water tables. Hardpans, shade beds, gravely layers, and
accumulations of soluble salts are extremely difficult to correct.
Surface Slope
Surface slope, or topography, largely determines the amount of runoff and erosion. It also
dictates irrigation methods, drainage, conservation measures, and other best management prac-
tices needed to conserve soil and water. The steeper the land, the more management is needed,
increasing labor and equipment costs. At certain slopes, soil becomes unsatisfactory for row
crop production. The ease with which surface soils erode, along with the percent of slope, is a
determining factor in a soil’s potential productivity.
Soil Organisms
Many groups of organisms live
in the soil. Soil organisms range
in size from microscopic (bacte-
ria, fungi, and nematodes) to
those readily visible to the naked
eye (moles, earthworms, and
insect larvae). Most soil organ-
isms depend on organic matter
for food and energy and are usu-
ally found in the upper foot of
soil. Factors that affect the abun-
dance of soil organisms include:
moisture, temperature, aeration,
nutrient supply, soil pH, and the
crop being grown. Some microscopic organisms cause many favorable soil reactions, such as
the decay of plant and animal residues. They help to speed nutrient cycling. Other reactions
can be injurious, such as the development of organisms that cause plant and animal diseases.
Nutrient Balance
Nutrient balance is a vital concept in soil fertility and crop production. Nitrogen may be the
first limiting nutrient in non-legumes. However, without adequate amounts of the other
nutrients, the benefits of nitrogen are lessened. As nitrogen fertilization raises yields, the crop
demands more of the other nutrients.
E-unit: Soil Chemistry
Page 7 � www.MyCAERT.com
Copyright © by CAERT, Inc. — Reproduction by subscription only. E040077
FIGURE 4. Earthworms are soil organisms that can be seen with the naked
eye.
ENVIRONMENTAL CONDITIONS AND NUTRIENT DEFICIENCIES
Understanding environmental conditions and their effects on the crop can help pinpoint a
problem that is developing. All factors that influence crop growth, response to fertilization, and
yield should be evaluated.
Soil Moisture
Both water and oxygen are essential for the uptake of nutrients. Nutrient absorption may be
restricted in wet soil due to a low level of oxygen. Under drought conditions, water absorption
is greatly reduced. Nutrient absorption drops with less water entering the plant. Dry soil con-
ditions may create deficiencies of nutrients, such as boron, copper, and potassium.
Light and Temperature
Many conditions that reduce the rate of photosynthesis and the production of sugars can
lower nutrient absorption. Stress caused from low light or extremes in temperature may lead to
nutrient deficiency problems.
Roots
Diseased roots, roots damaged from cultivation, and plantings that are too deep often result
in poor nutrient absorption.
pH
Certain nutrients become unavailable to plants if the pH value is too high or too low. The
amount of nitrogen, phosphorus, and potassium that are available is dependent on soil pH.
Acid soil conditions reduce the availability of calcium, magnesium, sulfur, potassium, phos-
phorus, and molybdenum, and increase the availability of iron, manganese, boron, copper, and
zinc.
Soil Tilth
The soil must be of good tilth and permeable enough for roots to expand and feed exten-
sively. A crop will develop a root system 6 feet or more in depth in some soils to get water and
nutrients. A shallow or compacted soil does not offer this root feeding zone. Wet or poorly
drained soils result in shallow root systems.
Cool Soil
Cool soil temperature slows organic matter decomposition. This lessens the release of
nitrogen, sulfur, and other nutrients. Nutrients are less soluble in cool soils and that increases
deficiency potential. Phosphorus and potassium diffuse more slowly in cool soils. Root activity
is decreased.
E-unit: Soil Chemistry
Page 8 � www.MyCAERT.com
Copyright © by CAERT, Inc. — Reproduction by subscription only. E040077
Soluble Salts
Soluble salts and alkali are problems in some areas. They may cover only part of the field.
They are usually present where a high water table exists, where salt water contamination has
occurred, or where poor quality water has been used for irrigation.
Weeds
Herbicides and mechanical controls are more
important today than ever before. Weeds rob crop
plants of water, air, light, and nutrients. Some weeds
may even release substances that inhibit crop growth.
Hardpans
Some soils develop hardpans (compaction) and
require deep tillage. This requires more phosphorus
and potassium to build up fertility.
Water Quality
Irrigation water can contain nitrate, sulfate, boron,
potassium, bicarbonate, chlorine, and other salts. A
water analysis should be used to modify production
practices for utilization of various water sources.
Pollutants
Other pollutants can also cause nutrient deficien-
cies as well as other problems.
Summary:
� Soil fertility is defined as the ability of a soil to provide nutrients for plant growth.
Soil pH is the measure of acidity or alkalinity of the soil. Most plants grow well insoils with a pH ranging from 5.5 to 7.0. Five materials used to raise soil pH are cal-cium oxide, calcium hydroxide, calcitic limestone, dolomitic limestone, and marl.
Soil colloids, ions, and cation exchange capacity are important to soil chemistry. Assoils are formed, some minerals and organic matter are broken down to extremelysmall particles called colloids. Ions are elements with electrical charges. Posi-tive-charged ions are called cations. Negative-charged ions are anions. Cations heldby soils can be replaced by other cations. The total number of exchangeable cationsa soil can hold is called its cation exchange capacity.
E-unit: Soil Chemistry
Page 9 � www.MyCAERT.com
Copyright © by CAERT, Inc. — Reproduction by subscription only. E040077
FIGURE 5. Weeds are able to rob other plants of
valuable water and nutrients.
Soil productivity can be affected by organic matter, soil depth, surface slope, soilorganisms, nutrient balance, and environmental factors.
Checking Your Knowledge:
� 1. What is soil fertility?
2. How is pH involved with soil fertility?
3. What is the importance of colloids, ions, and cation exchange capacity?
4. What factors influence soil productivity?
5. How can environmental conditions cause nutrient deficiencies?
Expanding Your Knowledge:
� Research the type of soil that exists around your home and school. Obtain informa-tion from your soil conservation district. Identify the soil type and the chemicalcharacteristics of the soil.
Web Links:
� Soil and Environmental Biogeochemistry
http://soils.stanford.edu/Index.htm
Cation Exchange Capacity (CEC)
http://soils.tfrec.wsu.edu/webnutritiongood/soilprops/04CEC.htm
About Soil pH
http://soil.gsfc.nasa.gov/soil_pH/plant_pH.htm
E-unit: Soil Chemistry
Page 10 � www.MyCAERT.com
Copyright © by CAERT, Inc. — Reproduction by subscription only. E040077