Software User Guide - Home | Ricoh Global

Software User Guide

• Readallsafetyprecautionsthoroughlytoensuresafeuse.• Typesofsoftwareinstalledonyourcomputervariesdependingonthemethodofinstallationfromthe

SoftwareCD-ROM.Fordetails,seethe“CameraUserGuide”• ForinformationontheoperatingsystemsthatsupporttheSoftwareCD-ROM,seethe“CameraUser

Guide”.

�

Using These ManualsThetwomanualsincludedareforyourG700SE.

1. Understanding How to Use Your Camera

“Camera User Guide” (Printed manual)Thisguideexplainstheusageandfunctionsofthecamera.Youwillalsoseehowtoinstalltheprovidedsoftwareonyourcomputer.

2. Downloading Images to Your Computer

“Software User Guide” *This manual (this file)

Thisguideexplainshowtodownloadimagesfromthecameratoyourcomputer.

3. Displaying Images on Your Computer

Theprovidedsoftware“MediaBrowser”(forWindowsonly)allowsyoutodisplayandeditimagesonyourcomputer.FordetailsonhowtouseMediaBrowser,clickthe[?]buttonontheMediaBrowserwindowandseethe“Help”ForthelatestinformationaboutMediaBrowser,accesstheWebpageofPixelaCo.,Ltd.(http://www.pixela.co.jp/oem/mediabrowser/e/).

How to Use the Software User GuideDisplay examples:Thedisplayexamplesmaybedifferentfromactualdisplayscreens.

Terms:Inthisguide,stillimagesandmoviesarereferredtoas“images”or“files”.

Symbols:Thisguideusesthefollowingsymbolsandconventions:

Thisindicatesimportantnoticesandrestrictionsforusingthiscamera.

Thisindicatessupplementaryexplanationsandusefultipsaboutcameraoperations.

Thisindicatespage(s)relevanttoaparticularfunction.“GP.xx”isusedtoreferyoutopagesinthismanual.

Thisindicatestermsthatareusefulforunderstandingtheexplanations.

http://www.pixela.co.jp/oem/mediabrowser/e/

http://www.pixela.co.jp/oem/mediabrowser/e/

�

ContentsUsing These Manuals ...................................................2

How to Use the Software User Guide ......................2

Contents ..........................................................................3

Chapter 1 Downloading Images to Your Computer (Windows)

Downloading Images ..................................................5

Downloading Images Without Using DL-10 ..........6

Downloading All Images Using the DL-10 Software ..........................................................................7

Warning Messages Under Windows XP Service Pack 3 and Windows Vista Service Pack 2 ...............8

Windows 7 Security Warning .....................................9

Disconnecting the Camera from Your Computer ...9

Detailed Instructions for DL-10 .................................9Starting/Exiting DL-10 .................................................... 9The DL-10 Window ........................................................ 10How to Use the [Option settings] .............................. 11How to Use the [Background illustration settings]...12Using [CameraMemo Settings] .................................. 12

Downloading Images from an SD Memory Card ... 13Images in an SD Memory Card ................................... 13

Chapter 2 Downloading Images to Your Computer (Macintosh)

Connecting the Camera to a Computer and Downloading Images ............................................... 15

Disconnecting the Camera from Your Computer ...16

Downloading Images from an SD Memory Card ... 16Images in an SD Memory Card ................................... 16

Chapter 3 How to Use EC1Using the Edit Detection Function ........................ 18

Updating Folder Contents ........................................... 18

Chapter 4 Shooting with Camera Memos

Section 1 About Camera MemosShooting with Camera Memos............................... 20

Memos .............................................................................. 20Using Memos .................................................................. 21

Section 2 Creating and Transferring a Memo List

Creating a Camera Memo List ................................ 23Starting and Exiting List Editor ................................... 23The List Editor Dialog .................................................... 23Using the List Editor ...................................................... 24

Transferring a Memo List File to the Camera ...... 26The List Editor ................................................................. 26Card Readers ................................................................... 26Deleting Memo List Files From Memory Cards ...... 26

Section 3 Taking Photographs with MemosRecording Memos with Photographs ................... 27

Adding Memos to New Photos .................................. 27Choosing Descriptions ................................................. 28

Viewing Memos ......................................................... 29Viewing Memos ............................................................. 29Editing Memos ............................................................... 29

Creating a Temporary Memo .................................. 30Creating a Temporary Memo ...................................... 30Editing the Temporary Memo ..................................... 31Creating a Temporary Memo from an Existing Memo ............................................................................... 31

Memo Increment ....................................................... 32Using Memo Increment ............................................... 32Using Memo Increment with Temporary Memos ...33

Voice Memos............................................................... 33Recording Voice Memos ............................................... 33Playing Voice Memos .................................................... 34Re-recording Voice Memos ......................................... 35

Registering Barcode Data as a Temporary Memo ...36Choosing a Barcode Mode .......................................... 36Reading a Barcode and Registering Barcode Data ...36

Image Memos ............................................................. 38First Steps ........................................................................ 38Viewing Image Memos ................................................. 39

Section 4 Viewing/Editing a Camera Memo on a Computer

Using ME1 .................................................................... 40The ME1 Window ........................................................... 40Editing Memos ............................................................... 40Printing Memos with Photographs ........................... 41

Section 5 Using Memos to Sort PhotosUsing EX1 ..................................................................... 42

EX1 Operation Flow ....................................................... 42Starting and Exiting EX1 .............................................. 42Transfer Settings ............................................................ 43Processing Photos ......................................................... 45Property ........................................................................... 45File Information .............................................................. 46

AppendicesHow to Use the Keyboard ........................................ 49

Troubleshooting ........................................................ 50

Chapter 1 Downloading Images to Your Computer (Windows)

Thissectionexplainshowtodownloadstillimagesandmoviestoyourcomputer(Windows).

�

Downloading ImagesTherearetwomethodsfordownloadingimagesfromthecameratoyourcomputer.

1. Downloading images without using image download software such as DL‑10 (GP.6).Thecameraisrecognizedbythecomputerasaseparatedriveandappearson[MyComputer].Selectandcopyimages.

2. Use image downloading software such as DL‑10 to download all images to the computer (GP.7).TouseDL-10,DCSoftwaremustbeinstalled.ForinformationonhowtoinstallDCSoftware,seethe“CameraUserGuide”.

• DonotturnoffthecameraordisconnecttheUSBcableduringimagetransfer.Thefileswillnotbewrittencorrectly.

• DonotusethecomputertoformattheSDmemorycardortheinternalmemory.UsethecameratoformattheSDmemorycardortheinternalmemory.

• BesuretostoptheconnectionbeforeremovingtheUSBcable.

• Thecameracannotdisplaypicturesthathavebeentransferredtothecomputerusing“WindowsPhotoGallery”(WindowsVista)or“WindowsLivePhotoGallery”(Windows7)andthencopiedfromthecomputertoamemorycardwhichissubsequentlyinsertedinthecamera.

• OnlyoneRicohdigitalcameracanbeconnectedtoonecomputer.DonotconnectmultipleRicohcamerastoonecomputeratthesametime.

• ThenamesforDCSoftwareitemsdifferfromthenamesforCaplioSoftwareitemsprovidedwithpreviousmodelsasshownbelow.

CaplioSoftware DCSoftware

RICOHGateLa DL-10

CaplioViewer DU-10

CaplioServer SR-10

CaplioSetting ST-10

• Whendownloadingimagesfromyourcamera,loadabatterywithadequateremainingpowerinthecamera.

• IfthereisanSDmemorycardinthecamera,imageswillbeloadedfromthecard.IfthereisnoSDmemorycardinthecamera,imageswillbeloadedfromtheinternalmemoryonthecamera.

• ThesoftwareincludedintheCD-ROMcanonlybeusedwithWindows.

�

Downloading Images Without Using DL‑10

1. Make sure that the camera power is off.

2. Connect the accessory USB cable to a USB port of your computer.

3. Connect the USB cable to the USB terminal of your camera.

Yourcameraturnson.Yourcomputerautomaticallyreadsthefilenecessaryforrecognizingthecameraasadrive.Afterthispreparation,thecameraisdisplayedasadriveat[MyComputer].

ExampleofthedisplayinWindowsXP

4. From the displayed drive, copy a file to the desired location.Thefigurebelowshowsthefolderconfigurationofthedrive.

Whenthecontentsoftheinternalmemoryaredisplayed,thedrivenameis[RICOHDCI].

• Ifafilewiththesamenamealreadyexistsatthedestination,itisoverwritten.

• IfDCSoftwareisinstalled,clearthecheckboxnexttothe[SavesautomaticallywhenconnectedtoUSB]optionintheDL-10[Optionsettings]dialogbox.

�

Downloading All Images Using the DL‑10 SoftwareDL-10automaticallycreatesafoldercalled[DigitalCamera]insideyour[MyDocuments]folder.Downloadedimagesaresavedinfolderswiththedateofeachshot,insidethe[DigitalCamera]folder.(Thefileswillcontinuetobesavedinthe[Caplio]folderifyouwerepreviouslyusingCaplioSoftware.)

Setthecorrectdateandtimeonthecamerabeforeshooting.


2. Connect the USB cable to the USB port of your computer.


Thecameraturnson,DL-10starts,andtheDL-10windowappears.

Imagetransferbeginsautomatically.

Ifimagetransferdoesnotbegin,pleasetrythefollowingprocedures:• Clickthe[Save]buttonintheDL-10

window.• Restartyourcomputerandperform

Steps1to3again.• Confirmthatthe[Savesautomatically

whenconnectedtoUSB]checkboxinthe[Optionsettings]dialogboxforDL-10isselected.

• Whenthe[Thesameimagewillnotbesaved]checkboxisselectedinDL-10[Optionsettings](GP.11),thetotalnumberoffilesthatcanbetransferredatonetimeis999.Totransfer1000filesormore,transfer999filesfirstandthenclick[OK]whenthedialogboxwiththenumberofremainingfilesappears.Afterthat,clickthe[Save]buttonintheDL-10windoworreconnecttheUSBcabletotransfertheremainingfiles.

• DonotturnoffthecameraordisconnecttheUSBcableduringimagetransferusingDL-10(whenthemessageforreceivingdataisdisplayed).

• Theimagesonthecomputerarerenamedusingconsecutivefilenumbers;thefilenamesassignedbythecameraarenotused.

• Evenwhenthestoragefolderischanged,thefilenumberwillbecontinuous.Thenumbercannotbeinitialized.

• WhentransferringimagestoacomputerusingDL-10,thefilesareassignednameslike[RIMG****.jpg](****indicatesthenumberoftheimage),evenif[CardSequenceNo.]issetto[On].

• FordetailsaboutDL-10,seeP.9.• FordetailsabouttheDL-10[Optionsettings]

dialogbox,seeP.11.• Todisconnectthecamerafromyourcomputer,

seeP.9.

�

Warning Messages Under Windows XP Service Pack 3 and Windows Vista Service Pack 2WhensoftwareforyourRicohdigitalcameraisusedonacomputerrunningWindowsVistaServicePack2oronacomputerwithWindowsXPServicePack3installed,awarningmessagesimilartotheoneshownbelowmayappearatsoftwareactivationorUSBconnection.Changethecomputersettingswhilereferringtotheinformationbelow.

AscreenshotofthewarningmessageinWindowsXPisshownbelow.

When warning messages appear:Aftercheckingtheprogramnameandpublisher,click[Unblock].

Ifyoudonotrecognizetheprogram,youshouldblockitbecauseitmaybeavirus.Clickthe[KeepBlocking]buttontopreventtheprogramfromconnectingtotheInternet.

If you clicked the [Ask Me Later] button:Eachtimetheprogramisactivated,the[WindowsSecurityAlert]windowappears.Thenyoucanselect[Unblock].

If you clicked the [Keep Blocking] button:FollowthestepsbelowtochecktoseetheWindowsFirewallsettings.

1. Open the [Windows Firewall] Control Panel.

Openthe[Start]menuandselect[ControlPanel],thendouble-click[WindowsFirewall](ifWindowsFirewallisnotlisted,click[SwitchtoClassicView]atthetopleftcorneroftheControlPanelwindow).

2. Allow the Ricoh application Internet access.

Inthe[WindowsFirewall]dialog,clickthe[Exceptions]tabandcheckwhetherDL-10islistedunder[ProgramsandServices].Ifitis,placeacheckinthecheckboxnexttoDL-10andclickOK.Ifitisnotlisted,click[AddProgram…]toaddDL-10tothelistofexceptions.

�

Windows 7 Security WarningOncomputersrunningWindows7,youmayencounterthefollowingwarningwhenstartingRicohsoftwarefordigitalcameraseithermanuallyorbyconnectingacamera:

When warning messages appear:Aftercheckingtheprogramnameandpublisher,click[Allowaccess].

Disconnecting the Camera from Your ComputerBeforedisconnectingthecamerafromthecomputer,clickthe[SafelyRemoveHardware]or[UnplugorEjectHardware]iconinthetaskbar(theillustrationbelowshowstheiconforWindowsXP)andselect[SafelyremoveUSBMassStorageDevice]or[StopUSBMassStorageDevice]fromthemenuthatappears.YoucanthendisconnecttheUSBcable.

IftheremovehardwareiconisnotdisplayedinWindows7,clickthe buttoninthetaskbar.

• IftheUSBcableisdisconnectedwithoutdisablingtheconnection,theUnsafeRemovalofDevicescreenmaybedisplayed.

• DonotdisconnecttheUSBcableduringimagetransfer.CheckthatimagetransferiscompletedandbesuretostoptheconnectionbeforeremovingtheUSBcable.

Detailed Instructions for DL‑10Starting/Exiting DL‑10

StartingDL-10isalreadyinstalledwithDCSoftware.

Connectingthecameratoyourcomputerautomaticallystartsthesoftwareandbeginsdownloadingofimagesfromthecamera.

ExitingToexitDL-10,followeitherofthestepsbelow.

• Clickthe[MENU]buttonontheDL-10windowandselect[Exit]fromthedisplayedmenu(see“TheDL-10Window”).

• Right-clicktheDL-10icononthetaskbarandselect[Exit]fromthedisplayedmenu.

RestartingTorestartDL-10afterexiting,followthestepsbelow.

• Fromthe[Start]menu,select[AllPrograms]or[Programs]then[DCSoftware]then[DL-10].

DL-10isnotnetwork-compatible.Useasastand-aloneapplication.

10

The DL‑10 WindowOnceDL-10startsup,thefollowingDL-10windowappearsonyourcomputerscreen.

1 [MENU] Button

Clickthisandthefollowingmenuappears.

[Optionsettings] Specifieswheretosaveimageswhendownloadingallimagesandwhichapplicationtostartafterimageshavebeensavedorwhenthe[Application]buttonisclicked.(GP.11)

[Backgroundillustrationsettings]

ChangesthebackgrounddesignintheDL-10window.(GP.12)

[CameraMemo] Transferimages(GP.19)todestinationsselectedbasedonthepresenceorabsenceofamemo(GP.12)andmemocontents.

[About] DisplaystheversionofDL-10.

[Exit] ClosesDL-10.

� [Save] Button

Clickthisandtheimagesaredownloadedfromyourcamera.

Ifthemessageindicatingthat[Connecting...Press[Adj.]keytodirectprint]appearsonthecamerapicturedisplay,donotclickthe[Save]button.

� [Application] Button

Theapplicationregisteredin[Optionsettings]isstarted.

4 [Minimize] Button

MinimizesthewindowanddisplaysitsiconontheWindowstaskbar.Ifyouclickontheicon,thewindowwillbedisplayedagain.

� Indicator

The“Indicator”lightsifthecameraisconnectedviaUSBcable.Whenlit,ifyoumovethemousepointeroverthe“Indicator”,[Cameraisbeingconnected]appears.Whenyourcameraisnotconnected,the“Indicator”isgrayedout,andifyoumovethemousepointeroverit,[Cameraisbeingconnected]doesnotappear.

11

How to Use the [Option settings]Ifyouclickthe[MENU]buttonontheDL-10windowandselect[Optionsettings]fromthedisplayedmenu,the[Optionsettings]dialogboxappears.

NotethatuninstallingthesoftwareforearlierRicohcamerasmayresetuserpreferencesforDL-10orRICOHGateLa.

Item Description InitialSetting

1 [SavesautomaticallywhenconnectedtoUSB]

SelectthecheckboxtohaveimagesdownloadedandsavedautomaticallyinyourcomputerwhenthecameraisconnectedtoyourcomputerwiththeUSBcable.Ifyoudeselectthecheckbox,yourimageswillnotbedownloadedautomaticallywhenyouconnectyourcameratothecomputer.Fordownloading,activateDL-10andclickthe[Save]button.

Saveautomatically

2 [Destinationfolder] Specifieswhichfoldertosaveyourimagesin.The[DigitalCamera]folderinside[MyDocuments]isspecifiedinitially;ifyouwanttochangethis,clickthe[Browse...]buttontodisplaythedialogboxandthenspecifythefolder.

———

3 [Createfolder] Specifieshowtocreateafolder.[Notcreated]

Yourdownloadedimageswillallbesavedinthefolderspecifiedinitem“2[Destinationfolder]”.

[Foreachdatephotographed]Createsanewfolderassigningthedatetheimageswereshotasthefoldername,andsavesimagesshotonthesamedayinthesamefolder.Forexample,ifshotonJanuary1,2010:[20100101]folder

[Foreachtimesaved]Createsanewfoldereachtimeandsaveimagesinthefolder.Ifimagesaresavedmorethanonceinaday,anewfolderiscreatedeachtime.Thefoldernameformatis“Savingdate+Underscore+Three-digitserialnumber”.Forexample,ifyousavedtwiceonJanuary1,2010:[20100101_001]folder,[20100101_002]folder

Createanewfolderforeachdatephotographed

4 [Thesameimagewillnotbesaved]

Whenthischeckboxisselected,imagesonceloadedintoyourcomputerarenotloadedagain.Thischeckboxisenabledonlywhen[Notcreated]or[Foreachdatephotographed]isselectedin[Createfolder].Toallowthisfunctiontoworkproperly,thecameradateandtimemustbesetcorrectly.Whenthischeckboxisdeselected,previouslyloadedimagesareloadedagain.* IfyouwerepreviouslyusingCaplioSoftware,imageswillbedownloaded

againifimagesdownloadedusingRICOHGateLaremainontheSDmemorycardevenifthe[Thesameimagewillnotbesaved]checkboxfortheDL-10[Optionsettings]isselected.

Thesameimagewillnotbesaved

5 [Applicationsoftwaresettings]

Tostartanapplicationafterloadedimageshavebeensaved,specifytheapplicationnamehere.Clickthe[Browse...]buttonandselecttheapplicationinthedisplayeddialogbox.

———

6 [Saveandstartapplicationsoftware]

Whenthisischecked,theapplicationspecifiedaboveisstartedaftertheimageshavebeensaved.Whenthisisunchecked,theapplicationisnotstarted.

Applicationisstarted

7 [Camera'sIPAddress]

Notusedforthiscamera,butusedforotherRicohdigitalcameras.Fordetails,seethedocumentationthatcamewiththecamera.

0.0.0.0

1�

How to Use the [Background illustration settings]YoucanselectabackgroundfortheDL-10windowfromthreetypesofpatterns.

Ifyouclickthe[MENU]buttonontheDL-10windowandselect[Backgroundillustrationsettings]fromthedisplayedmenu,the[Backgroundillustrationsettings]dialogboxappears.

1 [Background illustration pattern]

Selectthepatternyouwishtousefromthethreeavailable.

� [Preview]

Youcanpreviewthepatternselectedin[Backgroundillustrationpattern].

Using [CameraMemo Settings]Transferimagestodestinationsselectedbasedonthepresenceorabsenceofmemosandmemocontents.Clickthe[MENU]buttonandselect[CameraMemo]todisplaythe[CameraMemoSettings]dialog.

1 [Transfer From]

Choosethesourcefrom[MemoryCard(specifydriveorfolder)]and[DigitalCamera]inthe[Type]menu.Ifyouselect[Memorycard(specifydriveorfolder)],clickthe[Browse...]buttonandnavigatetothedesiredsourcefolder.

� [Save To]

Click[Browse...]andchoosethedestinationforthetransferredfiles.Thedestinationtypeisfixedandcannotbechanged.

� [Settings...]

Clickingthisbuttondisplaysthe[SettingInformation]dialog,whereyoucanadjusteachofthetransfersettingslistedbelowbydouble-clickingthesettingorbyselectingthesettingandclicking[Change...].

1�

[Overwriteandsave](availableonlywhen[DigitalCamera]isselectedfor[TransferFrom]

Choosewhethertoincludeimagesthathavealreadybeentransferredtothedestination.Select[Donotsavethesameimage]toskipimagesthathavealreadybeentransferred.

[Exporttype](availableonlywhen[MemoryCard]isselectedfor[TransferFrom])

Choosewhethertotransferallimagesoronlythosewithmemos.

[Transfermode] Choosewhetherthesub-foldersinthedestinationfolderarenamedbymemodescriptionorusingbothmemoitemnamesanddescriptions.

[Launchapplication]

Choosetheapplicationthatstartswhentransferiscomplete.

[ConfirmFileOverwrite]

Choosewhetheraconfirmationdialogisdisplayedbeforefilesinthedestinationfolderareoverwrittenbytransferredfileswiththesamename.Ifyouoptnottodisplayaconfirmationdialog,fileswillbeoverwrittenwithoutwarning.If[DigitalCamera]isselectedfor[TransferFrom],aconfirmationdialogwillonlybedisplayedif[Savethesameimage]isselected.

4 [Begin Transfer]

Clickthisbuttontobegintransfer(clickingthisbuttonistheonlywaytobegintransferusing[CameraMemoSettings]).

Reservedcharacters(\/;?*"<>|)areautomaticallyconvertedtounderscores(“_”)whenmemoitemnamesanddescriptionsareusedasfoldernames.

Downloading Images from an SD Memory CardItispossibletodownloadimagesfromanSDmemorycardtocomputerviaaPCcardslotorcardreader.

Images in an SD Memory CardImagesarestoredonanSDmemorycardinahierarchy,asshownhere.

Imagefiles

Ifyouconnectthecameraoracardreadertoacomputerandthendirectlydisplay,editorsaveSDmemorycardimagesonthecomputer,youmaynolongerbeabletoplaybacktheimagesonthecamera.Downloadtheimagestothecomputerbeforedisplaying,editingorsavingthem.

CardReader

Thisisadeviceconnectedtoacomputertoreadthecontentsofcards.Inadditiontothememorycardadapter-type,therearecardreadersintowhichyoucandirectlyloadanSDmemorycard.

Chapter 2 Downloading Images to Your Computer (Macintosh)

Thissectionexplainshowtodownloadstillimagesandmoviestoyourcomputer(Macintosh).

AlthoughsuppliedsoftwarecannotbeusedontheMacintosh,Macintoshcomputerscanbeusedtoviewthe“SoftwareUserGuide”(AcrobatReaderrequiredunderMacOS9).

1�

Connecting the Camera to a Com‑puter and Downloading Images


2. Connect the accessory USB cable to a USB port of your computer.


Yourcameraturnson.Yourcomputerautomaticallyreadsthefilenecessaryforrecognizingthecameraasadrive.Afterthispreparation,thecameraisdisplayedasadriveontheDesktop.

4. From the displayed drive, copy a file to the desired location.Thefigurebelowshowsthefolderconfigurationinthedrive.

Whenthecontentsoftheinternalmemoryaredisplayed,thedrivenameis[RICOHDCI].

• DonotturnoffthecameraordisconnecttheUSBcableduringimagetransfer.Thefileswillnotbewrittencorrectly.

• DonotusethecomputertoformattheSDmemorycardortheinternalmemory.UsethecameratoformattheSDmemorycardortheinternalmemory.

• BesuretostoptheconnectionbeforeremovingtheUSBcable.

• OnlyoneRicohdigitalcameracanbeconnectedtoonecomputer.DonotconnectmultipleRicohcamerastoonecomputeratthesametime.

• Whendownloadingimagesfromyourcamera,loadabatterywithadequateremainingpowerinthecamera.

• Ifafilewiththesamenamealreadyexistsatthedestination,itisoverwritten.Ifyoudonotwantthefiletobeoverwritten,renamethefileortransferdatatoanotherfolder.

• WhenanSDmemorycardisloaded,itsfilesaredisplayed.Otherwise,filesintheinternalmemoryaredisplayed.

1�

Disconnecting the Camera from Your Computer

1. Drag and drop the displayed drive or volume icon to the [Trash] icon.Whenascreenappearspromptingyoutoentertheadministrator'spassword,enterthepassword.

2. Unplug the USB cable.

• Youcanalsoselect[Eject]fromthe[Special]menuinMacOS9orthe[File]menuinMacOSXtocanceltheconnection.

• AwarningmaybedisplayediftheUSBcableisdisconnectedwithoutfirstremovingthecamerafromthesystemasdescribedabove.Besuretoremovethecamerafromthesystembeforedisconnectingthecable.

• Confirmthattransferiscompletebeforeremovingthecamerafromthesystemanddisconnectingthecable.

• WhenthecameraisconnectedtoaMacintoshcomputer,a“FINDER.DAT”or“.DS_Store”filemaybecreatedwhichthecamerawilllistasanunmatchedfile.Thisfilecanbedeletedwithoutrisk.

Downloading Images from an SD Memory CardItispossibletodownloadimagesfromanSDmemorycardtocomputerviaaPCcardslotorcardreader.

Images in an SD Memory CardImagesarestoredonanSDmemorycardinahierarchy,asshownhere.

Imagefiles

Ifyouconnectthecameraoracardreadertoacomputerandthendirectlydisplay,editorsaveSDmemorycardimagesonthecomputer,youmaynolongerbeabletoplaybacktheimagesonthecamera.Downloadtheimagestothecomputerbeforedisplaying,editingorsavingthem.

CardReader

Thisisadeviceconnectedtoacomputertoreadthecontentsofcards.Inadditiontothememorycardadapter-type,therearecardreadersintowhichyoucandirectlyloadanSDmemorycard.

Chapter 3 How to Use EC1

EC1isaneditdetectionsoftwareprogramthatallowsyoutocheckandviewwhetherstillimagestakenusingtheG700SEhavebeenprocessedoredited.

InordertocarryouteditdetectionusingEC1,youmustset[EditDetection]to[On]inthecamera’sshootingsettingmenubeforeshootinganddownloadtheimagestoyourcomputer.

1�

Using the Edit Detection FunctionYoucanonlycarryouteditdetectionusingEC1aftersetting[EditDetection]to[On]onyourcamera,shootingstillimages,anddownloadingtheimagestoyourcomputer.

1. Set [Edit Detection] to [On] in the camera’s shooting setting menu, and shoot still images.Foroperationprocedures,seethe“CameraUserGuide”.

2. Download the still images shot using your camera to your computer.

3. Select [Programs] (or [All Programs]) > [EC1] > [EC1] from the Windows [Start] menu.

4. From the EC1 Folder View, select the folder for the downloaded images.TheJPEGimagesintheselectedfolderwillbeloadedandtheimageswillbedisplayedinThumbnailViewafterloadingiscomplete.

FolderView ThumbnailView

• isdisplayedwithimagesthathavenotbeenprocessedoreditedaftershooting.

• isdisplayedwithimagesthathavebeenprocessedoreditedaftershooting.

• Neitheroftheaboveiconsisdisplayedwithimagestakenwhen[EditDetection]wassetto[Off ]orimagesforwhicheditdetectionisnotpossible.

• Bydouble-clickinganimageintheThumbnailView,youcanopentheimageusingthelinkedviewersoftware.

• Ifaspaceoccursatthebeginningorendofthefoldername,amessagewillappearandnoimageswillbedisplayed.

• Editdetectionisavailableonlywithphotographstakenusingcamerasequippedwithaneditdetectionfunction.

• Imagesforwhichthe[Resize],[ContrastCorrection],or[SkewCorrection]functionshavebeenusedduringplaybackmodewillbelabeledasimagesthathavebeenprocessedoredited.

• Whendownloadingimagestoyourcomputer,pleaseusethemethodfordownloadingshowninChapter1.Imagesdownloadedusingdifferentmethodsmaybelabeledasprocessedoreditedimageseveniftheyhavenotbeenprocessedoredited.

Forexample,whenyoudownloadimagestoyourcomputerusing“WindowsPhotoGallery”forWindowsVistaor“WindowsLivePhotoGallery”forWindows7,aportionoftheshootingdataiseditedduringthedownloadprocess.Asaresult,theimagesarelabeledasprocessedoreditedimagesforEC1.

• Dependingonthesoftwareyouusedtoviewimagesafterdownloadingthem,theimagesmaybelabeledasprocessedoreditedimagesifyouviewedtheimagesorimagepropertiesbeforesavingorclosingthem.

• FordetailsabouthowtoinstallEC1,seethe“CameraUserGuide”.

• Fordetailsaboutdownloadingimagestoyourcomputer,seeP.5.

Updating Folder ContentsAfteradding,deleting,orrenamingfolders,select[Reload]inthe[View]menutoupdatethefolderandthumbnaillists.

Chapter 4 Shooting with Camera Memos

Youcanattachcameramemos(informationsuchasshootingconditions)tothestillimagesyoushoot.Thissectionexplainscameramemos.

• Besuretosetthedateandtimeonthecamera.• Tousethecameramemofunction,DCSoftwaremustbeinstalled.• MemosarenotavailablewithSDWORMmemorycards.• ThecameramemofunctionisonlyforusewithWindows.

UseME1toviewandeditthememosthathavebeenappendedtophotographs(GP.40).

�0

Section 1 About Camera Memos

Shooting with Camera MemosTheimagefilestoringtheimageshotwithadigitalcamerahasanareawhereadditionalinformationcanbestored.Thecameramemofunctionusesthisareatoallowyoutoattachamemotothestillimageyoushoot.

Memosmakephotographseasytoidentifyandclassify.

• Memoscannotbeaddedtomovies.• Memoscannotbeaddedtophotographs

takenwith[On]or[WB-BKT]selectedfor[AutoBracket]inthecamerashootingmenu.

Cameramemo

• Photographer• Location,etc.

Image

Additionalinformation

Imagefile

MemosMemosconsistofalistof“items”(tags),eachwithitsown“description”(contents).MemoscanbeaddedtophotographsbypressingtheADJ./MEMObuttonandselectingthedesireddescriptionsinthecameramemodialogbeforeshooting.

4:3 F4 :3 F99999999

Company AFoundation workExteriorBeverly BeechGamma Company

ClientConst.typeLocationSupervisorAffiliates

FileName/SAMPLE

Camera Memo 1/2

Memo OnFILE LISTItems Description

�1

Using Memos

1. Create a memo list on the computer and transfer it to the camera (GP.��).UsethesuppliedListEditorapplicationtocreateandtransfertothecameraamemolistfile(extension“.mta”)containingmemoitemnamesanddescriptions.

2. Take photographs with memos (GP.��).PresstheADJ./MEMObuttontodisplaythecameramemodialog(GP.27).Afterchoosingdescriptions,pressMENU/OKtocreateamemowhichwillbeaddedtoallnewphotographs(ifdesired,thecontentsofthememocanbechangedaftershooting;GP.29).

Thefollowingtypesofmemoareavailable:

1 Text (GP.��)

Choosefromupto99textdescriptionscreatedwiththeListEditor.

TemporaryRecordExteriorEntrywayKitchenLiving roomBedroomBathroom

+

010203040506

3. Location 1/2

Cancel Execute

� Temporary memo (GP.�0)

Usethecameratocreateatemporarymemousingdescriptionsnotincludedinthememolist.Thenewdescriptionsarenotstoredinthememolistafterthecameraisturnedoff.

D

Camera Memo

Cancel OkShift Set

AHOV(

BIPW)

CJQX<

DKRY>

ELSZ[

FMT!]

GNU?&

/,~

-.*

+=^

147@_

258#”

369%’

$\0|`

[Space][Delete]

� Voice memos (GP.��)

Recordvoicememosofupto30secondsinlength.O00:00/00:30

:CancelShutter button: Start

4 Barcodes (GP.��)

Createtemporarymemosusingtextdescriptionsfrombarcodesreadusingthecamera.

1234567890Foundation workExteriorBeverly BeechGamma Company

BarcodeConst.typeLocationSupervisorAffiliates

FileName/SAMPLE

Camera Memo 1/45

FILE LIST Memo On

� Images (GP.��)

Tousestillimagesasreferenceimages,includeadescriptionwithanimagefilenamewhencreatingthememolist.Notethattheimagefilemustfirstbecopiedtothecameramemorycardorinternalmemory.

1/45

��

3. Transfer the photos to the computer (GP.�).CopythephotostothecomputerusingthesuppliedDL-10software.

4. View and edit memos (GP.40).UsethesuppliedME1softwaretodisplayphotographs,viewandeditmemos,andplayvoicememos.

• Memoswillbeaddedtoallphotographstakenwhileamemolistfileispresentinthecamera’sinternalmemoryoronthememorycardinsertedinthecamera.

• Forinformationoninstallingthesuppliedsoftware,seethe“SoftwareUserGuide”.• ThesuppliedsoftwareisavailableforWindowsonly.

��

Section 2 Creating and Transferring a Memo List

Creating a Camera Memo ListTocreateacameramemolist,usetheprovidedsoftwareListEditor.

Tocreateamemolist,firstcreatealistofupto20itemsandthencreateupto99descriptionsforeachitem.

• AcameramemolistfileinCSVformatcreatedbyadifferentapplicationcanbereadintotheListEditorandsavedonanSDmemorycardforusebythecamera.

• ToreadacsvformatcameramemolistfileintoListEditor,select[Open]fromthe[File]menuofListEditor,andthenspecifythefilename.

Starting and Exiting List Editor

Starting List EditorOntheWindows[Start]menu,select[AllPrograms]or[Programs]then[CaplioSoftware]then[ListEditor]tostartListEditor.

Exiting List EditorYoucanexitListEditorbyclickingthe[×](Close)buttonintheupper-rightcornerofthewindoworbyselecting[Exit]fromthe[File]menu.

The List Editor Dialog

1�

�

4

Item Description

1 Menubar Operationsthatcanbeperformedusingthemenusincludesaving,editing,andtransferringmemolists.

2 Toolbar Clicktheiconsinthetoolbarforquickaccesstothefollowingmenuitems:• [New]:Openadialogwhere

youcancreateanewmemolist.

• [Open]:Openamemolistthatyoupreviouslysavedonthecomputer.

• [Save]:Savethememolisttothecomputer.

• [Cut]/ [Copy]/ [Paste]:Cut,copy,orpasteselectedtext.

• [Transfer to Camera]:Copythememolistfiletothe[TEMPLATE]folderinthecamera’sinternalmemoryoronthememorycardcurrentlyinsertedinthecamera.

3 Itemname(GP.24)

Nameitemsinthememolist.Thenumberofitemscanbeselectedfrom20,10,and5usingthe[NumberofItems]optioninthe[File]menu.

4 Details(GP.24)

Enterdescriptionsfortheselecteditem.

�4

Using the List EditorTheListEditorisusedtocreateamemolistcontainingupto20itemswithupto99descriptionsforeachitem.

1. Choose the number of items in the memo list.Select[NumberofItems]fromthe[File]menu.

Choosethenumberofitemsfrom[5](thedefaultsetting),[10],and[20].Ifdesired,thenumberofitemscanbechangedafterthememolistiscreated;note,however,thatifthelistcontainsmoreitemsthanthenewmaximum,theexcessitemswillbedeleted.

2. Enter item names.

Clickanitemnumber,enteranameinthe[Itemname]textbox,andclick[Update]todisplaythenewnameintheitemlist.Followthesameproceduretochangeexistingitemnames.

Itemnamescanbeupto20characterslong.Thefollowingcharacterscannotbeused:\/:?*"<>|.Notethatthepresenceofanyofthesecharacters,commas,ormultipleperiodsmaycorruptthedisplayofitemnamesinRussian-languageoperatingsystems.

3. Enter descriptions.Selectanameintheitemlistandeditthedescriptionsfortheselecteditem.

Enterdescriptionsinthe[Input]textbox,andclick[Add]toaddthemtotheendoftheinputlist.Changestoexistingdescriptionscanbemadebyclickingthedescriptionandthenclickingoneofthefollowingbuttons:• [Edit]:Edittheselecteddescription.• [Delete]:Deletetheselecteddescription.• [Up]/[Down]:Movetheselected

descriptionupordownintheinputlist.

Descriptionscanbeupto32characterslong.Thefollowingcharacterscannotbeused:\/:?*"<>|.Notethatthepresenceofanyofthesecharacters,commas,ormultipleperiodsmaycorruptthedisplayofdescriptionsinRussian-languageoperatingsystems.

��

4. Complete the memo list.RepeatSteps2and3tocompletethememolist.

5. Save the memo list.Select[SaveAs]inthe[File]menu(memolistscanalsobesavedbyclickingthe buttoninthetoolbar).

Confirmthat[mtaFiles(*.mta)]isselectedfor[Saveastype](memolistscanbesavedasCSVfiles,butthemtaformatmustbeusedformemolistsintendedfortransfertothecamera).Afternavigatingtothedesiredlocationandenteringafilenameofuptoeightcharacters,click[Save]tosavethememolist.Notethatthecameracandisplayonlyfilenamesconsistingentirelyofunaccented(lowASCII)romancharacters.

Althoughlistscanbetransferreddirectlytothecamerawithoutbeingsaved,werecommendthatyousavethefilebeforetransfer.

Toeditanexistingmemolist,openitusingthe[Open]optioninthe[File]menu.Aftereditingthelist,saveitusingthe[Save]optioninthe[File]menuorbyclickingthe

buttoninthetoolbar.

��

Transferring a Memo List File to the CameraMemolistfilescanbetransferredtothecamerafromtheListEditororusingacardreader.

The List Editor

1. Start the List Editor and connect the camera.AfterstartingtheListEditor,connectthecameraasdescribedonP.6.ExitDL-10ifitstartswhenthecameraisconnected(GP.9).

2. Transfer the memo list file.Clickthe[ TransfertoCamera]iconinthetoolbarorselect[TransfertoCamera]inthe[Tools]menu.Ifamemorycardisinsertedinthecamera,thefilewillbetransferredtothe[TEMPLATE]folderonthememorycard;otherwise,itwillbetransferredtothe[TEMPLATE]folderininternalmemory.

Thefilewillonlybetransferredifthedestinationdevicecontainsa[TEMPLATE]folder.Ifthedestinationisamemorycard,besureithasbeenformattedinthecamera.

3. Click [OK].

4. Exit the List Editor.Select[Exit]fromthe[File]menuorclicktheclosebox[×]atthetoprightcorneroftheListEditorwindow.

5. Disconnect the camera.RemovethecamerafromthesystemanddisconnecttheUSBcableasdescribedonP.9(notethatiftheconnectionisnotterminatednormally,thememolistfilemaynotbetransferredtothecamera).Thememolistwillbeavailableforusewhenthecameraisturnedon.

Card ReadersAcardreadercanbeusedtocopyamemolistfiledirectlytothecamerafromthecomputer.Copythefiletothe[TEMPLATE]folderonthememorycard.A[TEMPLATE]folderiscreatedautomaticallywhenacardisformattedinthecamera.

Deleting Memo List Files From Memory CardsTopreventmemosfrombeingaddedtophotographs,useacomputertodeleteall“*.mta”filesfromthe[TEMPLATE]folderonthememorycardorinthecamera’sinternalmemory.Memolistfilescannotbedeletedbyformattingthememorycardorinternalmemoryusingtheformatoptioninthecamerasetupmenu.

��

Section 3 Taking Photographs with Memos

Recording Memos with PhotographsBeforeproceeding,confirmthatamemolistfilehasbeentransferredtothecamera’sinternalmemoryortothememorycardinsertedinthecamera.

Adding Memos to New Photos

1. Select 5/V mode and press ADJ./MEMO.Thecameramemodialogwillbedisplayed.



FileName/SAMPLE

Camera Memo 1/2

Memo OnFILE LIST

Ifthecameracontainsmultiplememolistfiles,themostrecently-usedfilewillbedisplayed.

Whilethecameramemodialogisdisplayed,photoscanstillbetakenbypressingtheshutter-releasebutton.

2. Create a memo.ChoosedescriptionsasdescribedonP.28.

3. Press MENU/OK.PressMENU/OKtoacceptthecurrentmemo.

4. Take photographs.Thememowillbeaddedtoallnewphotos.

Multiple Memo List FilesIfthecameracontainsmorethanonememolistfile,pressDISP.todisplayalistoffiles.Press!or"tohighlightafileandpressMENU/OKtoselect.

SAMPLE01SAMPLE02SAMPLE03SAMPLE04SAMPLE05SAMPLE06SAMPLE07SAMPLE08

0102030405060708

FILE LIST 1/2

Cancel Execute

• If[On]isselectedfor[DisplayMemoatStartup]inthecameramemomenu,thecameramemodialogwillbedisplayedautomaticallyatcamerastartup.

• Memoswillbeaddedtoallphotographstakenwhileamemolistfileispresentonthecamera.Topreventmemosfrombeingaddedtophotographs,useacomputertodeleteall“*.mta”filesfromthe[TEMPLATE]folderonthememorycardorinthecamera’sinternalmemory.Memolistfilescannotbedeletedbyformattingthememorycardorinternalmemoryusingtheformatoptioninthecamerasetupmenu.

• Notethatthecameracandisplayonlyfilenamesconsistingentirelyofunaccented(lowASCII)romancharacters.

��

Choosing DescriptionsDescriptionscanbeselectedinthecameramemodialog.Themethoduseddependsontheoptionselectedfor[CameraMemoMode]inthecameramemomenu.

[Mode1]

1. Highlight an item.Press!or"tohighlightanitem.

2. View descriptions.Press$toviewdescriptionsforthehighlighteditem.


+

010203040506

3. Location 1/2

Cancel Execute

3. Choose a description.Press!or"tohighlightadescriptionandpressMENU/OKtoselect.

4. Complete the memo.RepeatSteps1–3tochoosedescriptionsfortheremainingitems.

• Thelastoptioninthelistofdescriptionsis[NoSetting].Selectthisoptiontosetthedescriptionforthecurrentitemto[NoSetting].Notehoweverthatif[On]isselectedfor[MemoWarning],awarningwillbedisplayedandtheshutterreleasewillbedisabledifyouattempttotakeaphotographwiththedescriptionforoneormorememoitemssetto[NoSetting].Theshutterreleasecanbeenabledbychoosingadescriptionfortheaffecteditems.

• If[On]isselectedfor[CameraMemo1AutoDelete],thedescriptionforthefirstmemoitemwillautomaticallybesetto[NoSetting]whenthecameraisturnedon,aphotographistaken,oramemolististransferredtothecamera.Theshutterreleasecanbeenabledbychoosingadescriptionforthefirstitem.

[Mode2]Whenthecameramemodialogisfirstdisplayed,thedescriptionforeachitemwillbesettothefirstentryinthatitem’sdescriptionlist.Press$oncetosetthedescriptionforeachitemtothesecondentryinthedescriptionlist,twicetosetthedescriptionforeachitemtothethirdentryinthedescriptionlist,andsoon.Press#toreturntotheprevioussetofdescriptions.



FileName/SAMPLE

Camera Memo 1/45

FILE LIST Memo On

Showsthepositionofthecurrentmemoandthetotalnumberofcombinationsavailable.Inthisexample,thecurrentmemousesthefirstcombination.

Press!or"tochoosetheitemdisplayed.Thedescriptionsforindividualitemscannotbeselectedseparately.

Toskiptothepreviousornextcombinationthatcontainsauniquedescriptionfortheitemselectedfor[MemoSkip]inthecameramemomenu,pressandhold#or$.Thefollowingtablegivesanexampleofthecombinationsthatwouldbeskippedwhen[Item1]isselected.

Item Description 1 Description 2 Description 3 Description 4

1 A A A B

Theitemusedfor[MemoSkip]canselectedfromitems1–5.

��

Viewing MemosFollowthestepsbelowtoviewandeditphotosthathavebeenaddedtophotographs.

• Memoscannotbedeleted.• Cameramemoscanonlybeeditedas

describedbelowwhen[Mode1]isselectedfor[CameraMemoMode]inthecameramemomenu.InMode2,memoscanbedisplayedbypressingDISP.duringplaybackbutcannotbeedited.

Viewing Memos

1. Display the desired photo in playback mode.Photographstowhichmemoshavebeenaddedareindicatedbya“MEMO”icon.

2. Press ADJ./MEMO.Thememowillbedisplayedasshownbelow.Press!or"toviewadditionaldata.



FileName/SAMPLE

Camera Memo 1/2

Memo On

3. Press MENU/OK.PressMENU/OKtoreturntonormalplayback.

Editing Memos

1. Display the desired photo in playback mode.Photographstowhichmemoshavebeenaddedareindicatedbya“MEMO”icon.

2. Press ADJ./MEMO.Thememowillbedisplayedasshownbelow.



FileName/SAMPLE

Camera Memo 1/2

Memo On

3. Select an item.Press!or"tohighlightanitemandpress$toviewdescriptionsforthehighlighteditem.


+

010203040506

3. Location 1/2

Cancel Execute

4. Choose a description.Press!or"tohighlightadescriptionandpressMENU/OKtoselect.

5. Press MENU/OK.PressMENU/OKtoreturntonormalplayback.

�0

Creating a Temporary MemoMemodescriptionscanbecreatedonthecamera(eitherbyeditingexistingdescriptionsorcreatingentirelynewdescriptions)andtheresulting“temporarymemo”appendedtonewphotos.Temporarymemoscanbecreatedinbothshootingandplaybackmode.

• Temporarymemosarenotstoredinthememolistafterthecameraisturnedoff.

• Temporarymemoscanbecreatedusingbarcodes(GP.36).

• Temporarymemosareavailableonlywhen[Mode1]isselectedfor[CameraMemoMode]inthecameramemomenu.

Creating a Temporary MemoTocreateatemporarymemo,displaythecameramemodialogandfollowthestepsbelow.

1. Select an item.Press!or"tohighlightanitemandpress$toviewdescriptionsforthehighlighteditem.

2. Select [Temporary].Press!or"tohighlight[Temporary]andpressMENU/OK.


+

010203040506

3. Location 1/2

Cancel Execute

3. Select [Yes].Press#or$tohighlight[Yes]andpressMENU/OK.

4. Create a temporary description.Anon-screenkeyboardwillbedisplayed.UsethekeyboardtoenteratemporarydescriptionasdescribedonP.49.

D

Camera Memo

Cancel OkShift Set

AHOV(

BIPW)

CJQX<

DKRY>

ELSZ[

FMT!]

GNU?&

/,~

-.*

+=^

147@_

258#”

369%’

$\0|`

[Space][Delete]

Afterenteringthedescription,pressADJ./MEMOtoreturntothedescriptionlist.

5. Select the temporary description.Press!and"tohighlightthetemporarydescriptionandpressMENU/OKtoselect(toexitwithoutsavingthetemporarydescriptionandrestorethedescriptionpreviouslyselected,pressDISP.).RepeatSteps1–4tocreateadditionaltemporarydescriptionsasdesired.

�1

Editing the Temporary Memo

1. Select an item.Inthecameramemodialog,press!or"tohighlightanitemforwhichyouhavecreatedatemporarydescriptionandpress$toviewdescriptionsforthehighlighteditem.

2. Select a temporary description.Temporarydescriptionsareindicatedbya“+”.Press!or"tohighlightatemporarydescriptionandpress$.


+

010203040506

3. Location 1/2

Cancel Execute

3. Edit the description.EditthedescriptionasdescribedinSteps3–5of“CreatingaTemporaryMemo.”

Creating a Temporary Memo from an Existing MemoCreateatemporarymemobyeditinganexistingmemo.

1. Select an item.Press!or"tohighlightaniteminthecameramemodialogandpress$toviewdescriptionsforthehighlighteditem.

2. Select a description.Press!or"tohighlightadescriptionandpress$.


+

010203040506

3. Location 1/2

Cancel Execute

3. Edit the description.EditthedescriptionasdescribedinSteps3–5of“CreatingaTemporaryMemo.”

Editeddescriptionsarestoredasatemporarymemo.Theoriginaldescriptionsarenotaffected.

��

Memo IncrementIfamemodescriptionendsinanumber,youcanincreaseordecreasethenumberbypressing!or".

Memoincrementisavailableonlywhen[Mode1]isselectedfor[CameraMemoMode]inthecameramemomenu.

Using Memo IncrementTransfertothecameraamemolistfilecontainingdescriptionsthatendinnumbersandfollowthestepsbelow.

1. Select [On] for [Memo Increment].Select[On]for[MemoIncrement]inthecameramemomenu.


3. Select a description that ends in a number.Press!or"tohighlightadescriptionthatendsinanumberandpress$todisplaythememoincrementdialog.

No.102

Camera Memo

Cancel OkChange Number

Awarningwillsoundifyouselectadescriptionthatdoesnotendinanumber.

4. Edit the number.Press!or"tochooseanewnumberandpressMENU/OKtwicetoreturntoshootingmode.Thenewnumberwillberecordedwiththenextphotographtaken.

Thenewnumberisstoredasatemporarymemo.Theoriginaldescriptionisnotaffected.

��

Using Memo Increment with Temporary MemosMemoincrementcanbeusedwithtemporarymemos.

1. Create a temporary description that ends in a number (GP.�0).

2. Select [On] for [Memo Increment].Select[On]for[MemoIncrement]inthecameramemomenu.

3. Select the item.Inthecameramemodialog,press!or"tohighlighttheitemwiththetemporarydescriptionyoucreatedinStep1andpress$toviewdescriptionsforthehighlighteditem.

4. Select the temporary description.Temporarydescriptionsareindicatedbya“+”.Press!or"tohighlightthedescriptionandpress$todisplaythememoincrementdialog.

No.102

Camera Memo

Cancel OkChange Number

5. Edit the number.Press!or"tochooseanewnumberandpressMENU/OKtwicetoreturntoshootingmode.Thenewnumberwillberecordedwiththenextphotographtaken.

Voice MemosEachiteminamemocanhaveasadescriptionanaudiorecordingofupto30secondsinlength.Voicememoscanbecreatedandeditedinbothshootingandplaybackmode.

• Voicerecordingsaredeletedfromthememolistwhenthecameraisturnedoff.Voicerecordingsalreadystoredinmemosthathavebeenappendedtophotosarenotaffected.

• VoicememoscanbeplayedbackonthecomputerwhenphotographsaredisplayedinthesuppliedME1software.

Recording Voice Memos


2. Select [Record].Press!or"tohighlight[Record]andpressMENU/OKtodisplaytherecordingdialog.


+

010203040506

3. Location 1/2

Cancel Execute

�4

3. Record a voice memo.Presstheshutter-releasebuttontobeginrecording.

O00:00/00:30


Recordingendsafter30secondsorwhentheshutter-releasebuttonispressedhalfway.Thedescriptionlistwillbedisplayedwitha$iconnexttothe[Record]option(inplaybackmode,[Record]changesto[Playback]).


+

010203040506

3. Location 1/2

Cancel Execute

4. Press MENU/OK.Itemsforwhicharecordingexistsareindicatedbyaviconinthecameramemodialog.

Company AFoundation workvBeverly BeechGamma Company


FileName/SAMPLE

Camera Memo 1/2

FILE LIST Memo On

• Donotobstructthemicrophoneduringrecording.Keepmicrophonewithin20cm(7.8in.)ofthesource.

• Voicememosarenotavailablewithmatrixbarcodes.The[Record]optionisnotdisplayedinthedescriptionlistwhenamatrixbarcodetypeisselected.

Playing Voice MemosVoicememoscanonlybeplayedbackinplaybackmode.

1. Select an item for which a recording exists.Inthecameramemodialog,press!or"tohighlightanitemmarkedwithaviconandpress$toviewdescriptionsforthehighlighteditem.

TemporaryPlaybackExteriorEntrywayKitchenLiving roomBedroomBathroom

+

010203040506

3. Location 1/2

Cancel Execute

2. Select [Playback].Press!or"tohighlight[Playback]andpress$todisplaytheplaybackdialog.


00:00

��

3. Play the recording.Presstheshutter-releasebuttontoplaytherecording.

Playbackendswhentheendoftherecordingisreachedorwhentheshutter-releasebuttonispressedhalfway.Aconfirmationdialogwillbedisplayed.

Tore-recordthememoasdescribedinStep3of“RecordingVoiceMemos,”press#or$tohighlight[Yes]andpressMENU/OK.Select[No]toreturntothedescriptionlistwithoutmodifyingtherecording.

Re‑recording Voice MemosFollowthestepsbelowtoeditvoicememosinshootingmode.

1. Select an item for which a recording exists.Inthecameramemodialog,press!or"tohighlightanitemforwhicharecordingexistsandpress$toviewdescriptionsforthehighlighteditem.


+

010203040506

3. Location 1/2

Cancel Execute

2. Select [Record].Press!or"tohighlight[Record]andpress$todisplaytherecordingdialog.

O00:00/00:30


Re-recordthevoicememoasdescribedinStep3of“RecordingVoiceMemos.”

��

Registering Barcode Data as a Temporary MemoThecameracanreadbarcodesandstorethedataastemporarydescriptionsfortemporarymemos.Barcodescanbereadinbothshootingandplaybackmode.

• Thecameracanreadlinearbarcodesofupto32digitsandmatrixbarcodesofupto2400digits.Thebarcodetypecanbeselectedusingthe[BarcodeType]optioninthecameramemomenu.

• Voicememosarenotavailablewithmatrixbarcodes.The[Record]optionisnotdisplayedinthedescriptionlistwhenamatrixbarcodetypeisselected.

Choosing a Barcode ModeThe[BarcodeMode]optioninthecameramemomenucanbeusedtochoosewherebarcodedataarestored.

Mode1 Thebarcodeisstoredinthememolistasatemporarydescriptionforthefirstitem.Thisdescriptionisoverwritteneachtimeabarcodeisread.

Mode2 Thefirstbarcodereadisstoredinthememolistasatemporarydescriptionforthefirstitem,thesecondbarcodeasatemporarydescriptionfortheseconditem,thethirdbarcodeasatemporarydescriptionforthethirditem,andthefourthbarcodeasatemporarydescriptionforthefourthitem.Thesedescriptionsareoverwritteninturnasnewbarcodesareread.

Mode3 Thisoptiononlytakeseffectinshootingmode.Uptofiftybarcodescanbestoredinthememolistastemporarydescriptionsforthefirstitem.Thesedatacanbeviewedinthecameramemodialogbeforeshootingbutcannotbechangedandaredeletedafteraphotographistaken.

Reading a Barcode and Registering Barcode Data

Shooting Mode

1. Press the ADJ./MEMO button.The[CameraMemo]screenappears.

2. Point the camera toward the barcode you want to read and press the # button.Thecameraswitchestomacromodeandreadsthebarcodedata.Whenthecamerafinishesreadingthebarcode,thedataarestoredasatemporarydescriptionforthefirstiteminthememo.



FileName/SAMPLE

Camera Memo 1/45

FILE LIST Memo On

Ifthecameraisunabletoreadthebarcodeorifyouwishtoexitwithoutreadingthebarcode,press$orDISP.toreturntothecameramemodialog.Press#toreadthebarcodeagain.

Non-ASCIIcharactersinthebarcodedatawillbereplacedbyasterisks(“*”).

3. Read additional barcodes.If[Mode2]or[Mode3]isselectedfor[BarcodeMode],repeatStep2toreadadditionalbarcodes.

��

4. Press MENU/OK to accept the new memo.Thenewmemowillberecordedwiththenextphotographtaken.

Todeletebarcodesreadwith[Mode3]selectedfor[BarcodeMode],highlightthefirstiteminthecameramemodialogandpress$todisplaythedescriptionlist.Press!or"tohighlight[NoSetting]andpressMENU/OK.

Playback Mode

1. Display a photograph.Displayaphotographtowhichyouwishtoaddbarcodedata.

2. Press the ADJ./MEMO button.The[CameraMemo]screenappears.

3. Press the # button.Youcannowreadbarcodedata.

4. Point the camera toward the barcode you want to read and press the # button.Thecameraswitchestomacromodeandreadsthebarcodedata.Whenthecamerafinishesreadingthebarcode,thedataarestoredasatemporarydescriptionforthefirstiteminthememo.



FileName/SAMPLE

Camera Memo 1/45

Ok

Ifthecameraisunabletoreadthebarcodeorifyouwishtoexitwithoutreadingthebarcode,press$orDISP.toreturntothecameramemodialog.Press#toreadthebarcodeagain.

Non-ASCIIcharactersinthebarcodedatawillbereplacedbyasterisks(“*”).

5. When [Barcode Mode] is set to [Mode�], you can repeat Step 4 and read additional barcodes.

6. Press the MENU/OK button to confirm the camera memo.

7. Press the MENU/OK button.Thememowillbeaddedtothephotograph.

• Youcannotreadthesamebarcodemorethanonce.

• If,afterreadingthebarcode,youshootapictureorchangemodesandthenreadanotherbarcode,thepreviouslyregisteredbarcodedataisoverwritten.

• Ifyoueditedthecameramemobeforereadingabarcode,thechangestothecameramemoarenotretainedifthecameraisunabletoreadthebarcode.However,voicememosareretained.

• Youcaneditthebarcodedataregisteredasatemporarymemo.(GP.31)

• Thetimeavailabletoreadbarcodescanbeselectedusingthe[ScanTime]optioninthecameramemomenu.

��

Image MemosTousestillimagesasmemos,includeadescriptionwithanimagefilenamewhencreatingthememolist.Notethattheimagefilemustfirstbecopiedtothecameramemorycardorinternalmemory.

Imagememoscanbeviewedonlywhen[Mode2]isselectedfor[CameraMemoMode]inthecameramemomenu.Noimagewillbedisplayedifafilewiththeselectednamecannotbefound.

First Steps

1. Enter the image file name as a description.UsingthesuppliedListEditorapplication,enterthefilenameofthedesiredimageasadescriptionforthelastitemintheitemlist(GP.23).

• Enterthefilenameasthedescriptionforthelastitemintheitemlist.Theimagewillnotbedisplayedifthefilenameisenteredasadescriptionforotheritemsinthelist.

• Imagememofilenamesmustendinthe“.jpg”extension.

2. Connect the camera to the computer.See“DownloadingImagesWithoutUsingDL-10“(GP.6)formoreinformation.

3. Copy the image to the camera.Copytheimagetothe[TEMPLATE]folderininternalmemoryoronthecameramemorycard.

Imagememosmustsatisfyallthefollowingcriteria:• File type:JPEG• Color space:YCbCr4:2:2or4:2:0• Dimensions (W × H):From32×32to

4000×3000pixels,wherethewidthisamultipleof16andtheheightamultipleof8(YCbCr4:2:2)or16(YCbCr4:2:0)

• File size:12MBorless

��

Viewing Image Memos

Shooting ModeToviewimagememos,pressADJ./MEMOinthecameramemodialog.PressADJ./MEMOagaintoreturntothecameramemodialog.



FileName/SAMPLE

Camera Memo 1/45

FILE LIST Memo On

1/45

ADJ./MEMObutton

Playback ModeToviewanimagememothathasbeenappendedtoaphotograph,displaythephotographandpressADJ./MEMO.





ADJ./MEMObutton

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Press!,",#,or$toreturntoplaybackanddisplayotherphotographs.

Noimagememowillbedisplayedifafilewiththeselectednamecannotbefound.

40

Section 4 Viewing/Editing a Camera Memo

on a ComputerUsing ME1Oncephotographshavebeentransferredtothecomputer,thesuppliedME1softwarecanbeusedtodisplayphotographs,viewandeditmemos,andplayvoicememos.

Select[Programs](or[AllPrograms])>[DCSoftware]>[ME1]fromtheWindows[Start]menutostartthesoftware.

The ME1 Window1

�

�

Item Description

1 Menubar Operationsthatcanbeperformedusingthemenusincludeprintingandviewingphotographs.

2 Folderlist Alistofthefoldersonthecomputer.Clickafoldertodisplayanyphotographsitcontainsinthethumbnaillist.

3 Thumbnaillist

Alistofthephotographsintheselectedfolder.Double-clickathumbnailtodisplaythephotographfullframe.Thefollowingiconsaredisplayedunderthephotosinthethumbnaillist:• (GPS icon):Double-clickthisicon

todisplayGPSdatarecordedwiththephoto.IfnoGPSdataarerecordedwiththephoto,thisiconwillbegrayedoutandunavailable.

• (memo icon):Double-clickthisicontoeditthememoappendedtothephoto.Ifnomemohasbeenaddedtothephoto,thisiconwillbegrayedoutandunavailable.

Editing MemosToeditthememoforaselectedphoto,double-clickthe iconinthethumbnaillist.Theeditdialogwillbedisplayed.

1

�

�

4�

��

�

Item Description

1 Item Alistoftheitemsinthememo.

2 Voicememoicons

Theiconsforitemsthatcontainvoicememosaredisplayedinred.

3 Memo Thedescriptionsfortheitemsintheitemlist.

4 [PlayVoiceMemo]button

Clicktoplaythevoicememofortheselecteditem.

5 EditMemo Liststheitemnameanddescriptionfortheitemselectedintheitemlist.Thenameanddescriptioncanbeeditedbytypinginthecorrespondingtextbox(thefollowingcharacterscannotbeused:\/:?*"<>|).

6 [Apply]button

Clicktoapplythechangesinthe[EditMemo]panel.

7 [Save]button

Savechangesandclosetheeditdialog.

8 [Cancel]button

Closetheeditdialog.Anychangesmadesincethelasttimeyouclickedthe[Apply]buttonwillbelost.

41

• Nophotographswillbedisplayedifaspaceoccursatthebeginningorendofthefoldername.Editthefoldername.

• Notethatthepresenceofcommas,multipleperiods,oranyofthefollowingcharactersmaycorruptthedisplayofitemnamesinRussian-languageoperatingsystems:\/:?*"<>|

Printing Memos with PhotographsSelect[Print]inthe[File]menutoprintmemoswithphotographs.Printersettingscanbeadjustedbyselecting[Settings]inthe[File]menu.

Print SamplesSinglephotoprintedwithmemoonanA4sheet

Category01 Cameramemo01_01Category02 Cameramemo02_01Category03 Cameramemo03_01Category04 Cameramemo04_01Category05 Cameramemo05_01Category06 Cameramemo06_01Category07 Cameramemo07_01Category08 Cameramemo08_01Category09 Cameramemo09_01Category10 Cameramemo10_01Category11 Cameramemo11_01Category12 Cameramemo12_01Category13 Cameramemo13_01Category14 Cameramemo14_01Category15 Cameramemo15_01Category16 Cameramemo16_01Category17 Cameramemo17_01Category18 Cameramemo18_01Category19 Cameramemo19_01Category20 Cameramemo20_01

C:myPicture 2010/0101

RIMG0001. jpg 2010/01/10

TwophotosprintedwithmemosonanA4sheet




ThreephotosprintedwithmemosonanA4sheet


RIMG0001. jpg2010/0101

Category01 Cameramemo01_01Category02 Cameramemo02_01Category03 Cameramemo03_01Category04 Cameramemo04_01Category05 Cameramemo05_01Category06 Cameramemo06_01Category07 Cameramemo07_01Category08 Cameramemo08_01Category09 Cameramemo09_01Category10 Cameramemo10_01

RIMG0002. jpg2010/0101


RIMG0003. jpg2010/0101


• Photoscanbeprintedwithoutmemos.• Thenumberofmemoitemsthatcanbe

printedwiththreephotosonasinglesheetvarieswithprintersettings.

4�

Section 5 Using Memos to Sort Photos

Using EX1ThesuppliedEX1softwarecanbeusedto:

• Renamephotographsororganizephotographsintofoldersusingmemodata,allowingyoutogetanideaofmemocontentsfromtheimagefilenames

• ExportmemosinCSV,XML,orTXTformat

EX1isavailableinclientandserverversions.Theserverversion(“EX1forServer”)continuouslymonitorsaselectedsourcefolderfornewimagesandautomaticallyprocessesthemastheyareaddedtothefolder.Theclientversion(“EX1forClient”)doesnotprocessimagesautomatically.

EX1 Operation Flow

1. Copy photos to the computer (GP.�).Copyphotographswithmemostothecomputer,eitherusingDL-10orbyanothermethod.

2. Adjust transfer settings (GP.4�).Choosesourceanddestinationfolders.

3. Process photographs.TheserverversionofEX1automaticallyprocessesphotosastheyareaddedtothesourcefolder(GP.45);toprocessphotosusingtheclientversion,select[Programs](or[AllPrograms])>[EX1forClient]>[Transfer]fromtheWindows[Start]menu(GP.45).

Starting and Exiting EX1

EX1 for ServerWheninstalledusingthedefaultinstallationoptions,EX1residespermanentlyinthesystemtray.TocloseEX1,clicktheiconinthesystemtrayandselect[Quit].

TorestartEX1,select[Programs](or[AllPrograms])>[EX1forServer]fromtheWindows[Start]menu.

EX1 for ClientToadjustsettings,select[Programs](or[AllPrograms])>[EX1forClient]>[Setting]fromtheWindows[Start]menu.Toprocessphotos,select[Programs](or[AllPrograms])>[EX1forClient]>[Transfer].ToexitEX1,closethetransfersettingsdialog.EX1willterminateautomaticallywhenprocessingiscomplete.

4�

Transfer Settings

EX1 for ServerClickingtheEX1iconinthesystemtraywiththerightmousebuttondisplaysthefollowingtransfersettingsdialog.

1

4

�

�

Item Description

1 TransferFrom

Click[Browse…]tochoosethewatchedfolder.

2 Process Choosehowphotographswillbeprocessed.• Camera memo extraction:Rename

filesaccordingtomemocontentsandtransferthemtotheselecteddestinationfolder,orexportmemosinCSV,XML,orTXTformat.

• Camera memo category:Createsub-foldersintheselecteddestinationfoldernamedaccordingtomemocontentsandtransferfilestotheappropriatesub-folders.

Click[Detail...]toadjustsettingsfortheselectedoption(GP.44).

3 SaveTo Click[Browse…]tochooseadestinationfolder.

4 [OK]button Savechangesandexit.

EX1 for ClientSelect[Programs](or[AllPrograms])>[EX1forClient]>[Setting]fromtheWindows[Start]menu.

1

�

�

�

4

Item Description

1 TransferFrom Click[Browse…]tochoosethefoldercontainingtheimagesyouintendtoprocess.

2 Process Choosehowphotographswillbeprocessedasdescribedunder“EX1forServer.”

3 SaveTo Click[Browse…]tochooseadestinationfolder.

4 [Displayconfirmationdialogbeforetransferbegins]

Selectthisoptiontodisplayaconfirmationdialogbeforetransferbegins(GP.45)

5 [OK]button Transferphotos.Theoriginalfileswillbedeletedwhentransferiscomplete.(ThefirsttimeyoustartEX1forClient,thisbuttonisdisplayedas[BeginTransfer].)

If[Cameramemoextraction]isselectedfor[Process],reservedcharacters(\/:?*"<>|)areautomaticallyconvertedtounderscores(“_”)whenmemoitemnamesanddescriptionsareusedasfoldernames.

44

Process > DetailClicking[Detail...]inthe[Process]paneldisplaysthefollowingdialog.

Theitemsinthesettinginformationlistdependontheoptionselectedinthe[Process]panel.Tochangesettings,highlightaniteminthesettinginformationlistandclick[Change...].

Camera Memo Extraction > Rename Syntax

Choosethememoitemsthatwillbeusedtorenamefiles.Ifmultipleitemsareselected,theywillbeseparatedbyanunderscore(“_”)inthefilename.

Camera Memo Extraction > Export Format

Selecttheformatorformatsthatwillbeusedtoexportmemos.Memoswillnotexportedifnooptionsareselected.

Camera memo category > Transfer Mode

Choosewhetherfoldernameswillconsistoftheitemnameanddescriptionseparatedbyanunderscore(“_”)orsimplythedescription.

Example:Giventhefollowingcameramemo…

ItemName Description

Item1 DescriptionA

Item2 DescriptionB

Item3 DescriptionC

Item4 DescriptionD

…thefollowingfolderswillbecreatedusingtheitemnamesanddescriptions:

Item1_DescriptionA

Item1_DescriptionB

Item1_DescriptionC

Item1_DescriptionD

4�

Processing Photos

EX1 for ServerIffoldermonitoringisenabled,EX1willmonitorthefolderselectedinthetransfersettingsdialogandautomaticallyprocessimagesastheyareaddedtothefolder.Disablefoldermonitoringtopreventimagesfrombeingprocessedautomatically.

Ifatransferredfileisfoundtobedamagedorcorrupt,amessagewillbedisplayedandtransferwillendautomatically.

EX1 for ClientSelect[Programs](or[AllPrograms])>[EX1forClient]>[Transfer]fromtheWindows[Start]menu.If[Displayconfirmationdialogbeforetransferbegins]isselectedinthetransferoptionsdialog,thefollowingdialogwillbedisplayed.Click[Transfer]totransfertheimages.

Theoriginalfilesaredeletedaftertransfer.

PropertyToopentheEX1forServerpropertiesdialog,rightclicktheEX1iconinthesystemtray.

1

�

Item Description

1 Settingforapplicationlaunching

Choosewhetherfoldermonitoringisenabledbydefault.

2 Enabletheoutputoftransferlog

Choosewhetheralogfilewillbecreatedwhenimagesaretransferred.• Browse…:Chooseadestinationfor

thelogfile.

• Maximum file size:Choosethemaximumsizeforthelogfile.

• History of file number:Choosethenumberoffilesincludedinthetransferhistory.

4�

File InformationTheinformationbelowisincludedinfilescreatedusing[ExportFormat].

Thisexampleassumesthatthefollowingfileistransferred:

File Description

Item Content

Dateofrecording 2010.10.1000:00:00

GPSdata None

Memo Contents

ItemName Description

Item1 DescriptionA

Item2 DescriptionB

Item3 DescriptionC

Item4 DescriptionD

Item5 DescriptionE

XML Format

MainTagName Content

DateTimeOriginal Shootingdateoftheimagefile

GPSLatitudeRef Latitude(NorS)

GPSLatitude Latitude(Numericvalue)

GPSLongitudeRef Longitude(EorW)

GPSLatitude Longitude(Numericvalue)

CameraMemo1–CameraMemo5 Itemnamesanddescriptions

MemoItem1–MemoItem5 Itemnames

MemoData1–MemoData5 Descriptions

<?xmlversion="1.0"encoding="Shift_JIS"?><Exif>

<APP1><Exif_IFD>

<DateTimeOriginal>2010:10:1000:00:00</DateTimeOriginal>

</Exif_IFD><GPS_IFD>

<GPSLatitudeRef>N</GPSLatitudeRef><GPSLatitude>00:00:00</GPSLatitude><GPSLongitudeRef>E</GPSLongitudeRef><GPSLongitude>00:00:00</GPSLongitude>

</GPS_IFD></APP1><APP5>

<CameraMemo1><MemoItem1>Item1</MemoItem1><MemoData1>DescriptionA</MemoData1>

</CameraMemo1><CameraMemo2>

<MemoItem2>Item2</MemoItem2><MemoData2>DescriptionB</MemoData2>


<MemoItem3>Item3</MemoItem3><MemoData3>DescriptionC</MemoData3>


<MemoItem4>Item4</MemoItem4><MemoData4>DescriptionD</MemoData4>


<MemoItem5>Item5</MemoItem5><MemoData5>DescriptionE</MemoData5>

</CameraMemo5></APP5>

</Exif>

4�

CSV Format

MainTagName Content






(Memoitemnamesanddescriptions)

Theaboveinformationisfollowedbythememoitemnamesanddescriptions.

DateTimeOriginal,2010:10:1000:00:00GPSLatitudeRef,NGPSLatitude,00:00:00GPSLongitudeRef,EGPSLatitude,00:00:00Item1,DescriptionAItem2,DescriptionBItem3,DescriptionCItem4,DescriptionDItem5,DescriptionE

TXT Format

MainTagName Content






CameraMemo1–CameraMemo5

Memoitemnamesanddescriptions

[DateTimeOriginal]2010:10:1000:00:00[GPSLatitudeRef ]N[GPSLatitude]00:00:00[GPSLongitudeRef ]E[GPSLatitude]00:00:00[CameraMemo1]Item1DescriptionA[CameraMemo2]Item2DescriptionB[CameraMemo3]Item3DescriptionC[CameraMemo4]Item4DescriptionD[CameraMemo5]Item5DescriptionE

Appendices

4�

How to Use the KeyboardTousethekeyboard,followthestepsbelow.

D

Camera Memo

Cancel OkShift Set

AHOV(

BIPW)

CJQX<

DKRY>

ELSZ[

FMT!]

GNU?&

/,~

-.*

+=^

147@_

258#”

369%’

$\0|`

[Space][Delete]

Memoarea

Keyboardarea

1. Enter a description of up to �� characters.Highlightcharactersusing!,",#,or$andpressMENU/OKtoenterthehighlightedcharacteratthecurrentcursorposition(todeletethecharacteratthecurrentcursorposition,select[Delete]).PressDtoshiftbetweenupperandlowercase.Toexitwithoutchangingthedescription,presstheDISP.button.

2. Press ADJ./MEMO.PressADJ./MEMOtosavethedescriptionandexitthekeyboardentrydialog.

�0

TroubleshootingProblem 1 Cannot download images

Solution 1

YourcameramaynotberecognizedcorrectlyifyouconnecttotheUSBPortofyourcomputerviaaUSBhub.

FollowthestepsbelowtochangetheUSBport.

• ConnectyourcameradirectlytotheUSBportofyourcomputer.

• Ifthereareseveralroothubs,changetoanotherhub.

Ifyouareusinganon-USBhub,tryconnectingviaaUSBhub.

Solution �

Thebatteryinthecameramayhavewornout.

Beforedownloadingimagesfromyourcamera,loadabatterywithadequateremainingpowerinthecamera.

Solution �

Thefreespaceontheharddiskinyourcomputermaybeinsufficient.

CheckwhethertheharddiskhassufficientspaceforrunningWindows,andwhetherthedrivewhereyouareloadingimagefileshasthesamecapacityormoreasthatoftheSDmemorycardinsertedinthecamera.

Problem � Even if you check [The same image will not be saved] in the DL-10 [Option settings], the same images are loaded into your computer.

Solution

Thecamera'sclockisincorrectlysetorthecamera'sclockinformationhasbeenreset.

Toallowthe[Thesameimagewillnotbesaved]functiontoworkproperly,thecamera'sclockinformationmustbesetproperly.Setitproperly.

Problem � Files loaded from the camera into the computer were deleted. You attempted to load the same files from the camera again but failed.

Solution

If[Thesameimagewillnotbesaved]ischeckedintheDL-10[Optionsettings],filesloadedintoyourcomputeroncecannotbeloadedagain.IntheDL-10[Optionsettings],uncheck[Thesameimagewillnotbesaved].

Problem 4 [Failed to save.] appears during image loading from the camera into your computer

Solution

Setthecameratoplaybackmodeandcheckthat[UnmatchedFile]isnotdisplayedforanyfile.If[UnmatchedFile]isdisplayed,deletethefilefromtheSDmemorycardorinternalmemoryafterbackingupallfilesonyourcomputer.Tobackupthefilesinthecamera,copyallfilesintoyourcomputerdirectlybyusingacommercially-availablecardreaderorbyconnectingthecameratothecomputerusingtheUSBcableprovided.