Customer:__________________________________________________________

Contact:________________________________________Phone:______________

P.O. #__________________________________Date Needed:_________________

Job name:__________________________________________________________

QTY. Size Model TAG Unit Cost Total

Subtotal:

Tax:

Freight:

Total:

Special Instructions:

Invoice #

Job# By: Date:

Ship: Will Call:

P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360

Specifications:Frame: 24 Ga. Galv.

Door: 6” to 12” 24 Ga. Galv.

14” to 24” 22 Ga. Galv.

Insulation: 1” Fiberglass

Cam Locks: Zinc Plated

6” thru 14” 2 cam locks

16” thru 24” 4 cam locks

Gasket: 1/8” x 1/2” Neoprene

Call for Information

Also Available: Stainless Steel Aluminum HingedCall for pricing

MODEL: AD Insulated Access Door

Yellow Label Access Doors

1

Stock Size Price Each

6 x 6 10.20

8 x 8 10.95

10 x 10 11.75

12 x 12 13.25

14 x 14 16.35

16 x 16 19.40

18 x 18 25.40

20 x 20 26.30

24 x 24 30.00

P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360

Adds to Price List: Multipliers

Stainless Steel Call for Pricing

Aluminum Call for Pricing

Extra Blades $20.00 Each

Quadrants $4.00 each

All damper sizes are 1/4” smaller both ways

MODEL: OBN / PBN Opposed or Parallel Not Sealed

Dampers larger than 48 x 48 can be calculated by group of multiples.Jack Shafting available on dampers over 48”

Height in Inches 6-18 19-24 25-30 31-36 37-42 43-48

6-11 58.00 62.00 66.00 70.00 74.00 78.00

12-18 68.00 74.00 80.00 86.00 92.00 98.00

19-24 80.00 87.00 94.00 102.00 110.00 118.00

25-32 93.00 102.00 112.00 122.00 132.00 142.00

33-40 115.00 126.00 137.00 148.00 159.00 172.00

41-48 141.00 154.00 166.00 178.00 191.00 205.00

Blade Length - In Inches

Minimum Order $58

2 P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360

Adds to Price List: Multipliers

Stainless Steel Call for Pricing

Aluminum Call for Pricing

Extra Blades $20.00 Each

All damper sizes are 1/4” smaller both ways

MODEL: OBS / PBS Opposed or Parallel Sealed

3

Belimo Actuators in Stock for Immediate Shipment

Dampers larger than 48 x 48 can be calculated by group of multiples.Jack Shafting available on dampers over 48”

Height in Inches 6-18 19-24 25-30 31-36 37-42 43-48

6-11 70.00 75.00 80.00 85.00 90.00 95.00

12-18 83.00 90.00 97.00 105.00 112.00 120.00

19-24 97.00 107.00 117.00 128.00 139.00 150.00

25-32 115.00 128.00 141.00 154.00 167.00 179.00

33-40 142.00 155.00 168.00 182.00 196.00 210.00

41-48 170.00 185.00 200.00 216.00 232.00 250.00

Blade Length - In Inches

P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360

Minimum Order $70

MODEL: SLB Standard Louver Box Frame

SLF Standard Louver Flange Frame

Galvanized (Standard) or Paint Grip Minimum Price $75/each Box (SLB) 4” Standard Louver. $27.00/sq ft.Flange (SLF) 4” Standard Louver - 1” Flange Standard $30.00/sq ft. (12” tall & under mfg. in 2” deep frame)2” Box Frame $38.00/sq ft.2” Flange Frame $40.00/sq ft.6” Box Frame $30.00/sq ft.6” Flange Frame $32.00/sq ft.

Aluminum or Color-Clad Aluminum Minimum Price $85 /each Box (SLBA or SLBU) 4” Standard Louver. $34.00/sq ft.Flange (SLFA or SLFU) 4” Standard Louver $35.00/sq ft. (12” tall & under mfg. in 2” deep frame)2” Box Frame $42.00/sq ft.2” Flange Frame $43.00/sq ft.6” Box Frame $37.00/sq ft.6” Flange Frame $38.00/sq ft.Note: All pricing is figured on length times height rounded to the next full inch. All Louvers are 1/4” smaller both ways.

4 P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360

MODEL: BDD Backdraft Damper

Back Draft Damper base price per sq. ft. $27.00

High Volume Back Draft Damper base price per sq. ft. $34.00

Add per unit for spring Loaded or Counter Balanced $15.00

Flanged Model per sq. ft. $32.00

Note: All sq. ft. pricing is figured on length times height rounded to the next full inch.

All Back Draft Dampers larger than 36 x 36 will be sectioned.

All Dampers are 1/4” smaller both ways. Minimum Price $75/each

5P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360

MODEL: SBD Rectangular Single Blade Dampers

MODEL: RBD Round Back Draft Damper

Quadrants $4.00 each

Per Sq. In. (length x width) .09¢ ($13.00 min)

Specifications: 16 Ga. Galvanized Blade 1/2” Round Plated CRS Rod

8” - 10” RD $75.00

12” - 14” RD $85.00

16” - 20” RD $110.00

22” - 24” RD $140.00

26” - 30” RD $175.00

32” - 36” RD $220.00

6 P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360

MODEL: RSBN Round Single Blade Dampers

MODEL: ROBN Round Opposed Blade Damper

ROBN Non-Sealed Prices

18” - 20” RD $150.00

22” - 30” RD $200.00

32” - 40” RD $250.00

42” - 48” RD $350.00

ROBS Sealed Prices

18” - 20” RD $195.00

22” - 30” RD $260.00

32” - 40” RD $325.00

42” - 48” RD $450.00

6” - 14” RD $60.00

16” - 20” RD $70.00

6” - 14” RD $75.00

16” - 20” RD $90.00

7P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360

RSBN Round Single Blade Non-Sealed RSBS Round Single Blade Sealed

ROBN Round Opposed Blade Non-Sealed Damper

Standoff Quadrants $1 2 /each

Standoff Quadrants $1 2 /each

MODEL: RC Roof Curb

SMP Part # F SQ. V SQ. Roof Opening Cost

RC16 16 20 13 $130

RC 18 18 22 15 $145

RC 20 20 24 17 $160

RC 22 22 26 19 $175

RC 24 24 28 21 $190

RC 26 26 30 23 $205

RC 28 28 32 25 $225

RC 30 30 34 27 $250

RC 32 32 36 29 $270

RC 34 34 38 31 $285

RC 36 36 40 33 $300

Standard Construction Features

• 16 gauge galvanized steel

• 1-1/2”, 3 lbs. Density thermal and acoustical insulation

• Continuously welded corners

• Wood Nailer

Options

• Damper tray

• No Wood Nailer (deduct 1-1/2” for actual height)

Sizes that increase or decrease available.

Other sizes available.

Wood Nailer

Roof Opening

V Sq.

F Sq.

Insulation

1 1/2”

17 1/2”

2” Flange

8 P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360

9P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360

Cap

Base Plate 2” Flange

2 x 4 Wood Nailer

Base Plate

2 x 4 Wood Nailer

5” Cap

2” 3 1/2” 2”

Our Curb Support Rails unique design offers a high load bearing capacity. Manufactured in welded 18ga galvanized steel sections that are continuously welded together. This design offers optimum internal reinforcement every 24”. The full Manufactured section is then welded to the 18ga base plate. A continuous 2 x 4 wood nailer is attached to the top along with the removable counter flashing. The flashing provides an effective method of attaching roofing felts and assuring a water tight application. Standard sizes are 2’, 4’, 6’, 8’ and 10’ lengths.

Standard Construction• 18 ga Galvanized Welded Steel Construction• 16” Height• 2 x 4 Wood Nailer• Counter Flashing Cover• Internal Reinforcement every 24”

Options• Height Change• Heavier Gauge• Wider Wood Nailer• Insulated

Under 100’ 100’ - 248’ 250’ - 398’ 400’ +

2’ Length $90.00

4’ Length $180.00

6’ Length $270.00

8’ Length $360.00

10’ Length $450.00

CSR Curb Support Rails

MODEL: CSR Curb Support Rail

Call For Pricing

BladeCenters

3”

BladeCenters

3”

Model: OBS

Model: PBS

10 P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360

11P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360

BladeCenters

3”

BladeCenters

3”

Model: BD

Model: HVBD

12 P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360

13P.O. Box 32610 • 8030 Ranchers Road NE • Minneapolis, MN 55432 • 763 - 783 - 7173 • fax: 763 - 785 - 6977 • 800 - 297 - 9360