SMARTECTHE DEDICATED DESIGN OFFICE

Top-flight engineering services for a fast changing world

The Smartec design office was founded in 2001 by , the majority partner with 70%, and Russian

engine-maker , with 30%. It has facilities in two cities, both historic centers of the Russian aerospace industry: headquarters in Moscow and a regional branch in Samara, about 1,000 kilometers southeast of the Russian capital.

Smartec is specialized in the design of different types of propulsion systems and power generators, including aircraft engines, powertrain and other rotating machinery. We cover all engineering aspects of these systems, from design and modeling, to development test monitoring and in-service support.

Smartec calls on 150 of Russia’s top engineers to deliver innovative integrated and cost-effective solutions to our customers.

Our staff use proven methodologies and world-class design software to develop solutions keyed to each customer’s specific requirements. They are all familiar with Lean-Sigma precepts as part of our continuous improvement approach. Our staff also have solid linguistic skills: all Smartec engineers speak fluent English and have received training in French, and our sales staff can speak French, English or Russian with customers.

These factors drive Smartec’s agility and responsiveness, as proven by our role on all of Snecma’s successful commercial aircraft engines.

Snecma incorporates innovative technologies to offer the best combination of performance, reliability, environmental-friendliness and economy.

less fuel consumption and CO2 emissions than current engines.

decreases margin in NOx emissions versus standard and regulations.

complies with noise standard.

Smartec’s contribution to aeroengines includes: High-pressure/Low-pressure turbine/TRF/TRV: design,

mechanical optimization, thermal and dynamic, design, overpressure, lifetime...

High-pressure compressor and casing: mechanical,

lifetime, thermal, FBO…

Engine accessories: fatigue, 3D fracture mechanics, assembly and

dynamic analysis.

Casing and buildup unit: LCF/HCF, FBO, creep, windmilling,

overpressure, buckling, 3D design.

Modules & Integration: whole engine dynamic analysis, kinematic

studies, instrumentation, drawing set, publications.

Test bench support (endoscopy, dynamic measurement, telemetry, tip-

timing...) and test results analysis.

Smartec’s capabilities

Detailed designMain parts, all the way to system integration.

MethodsDesign to cost and weight, tolerance stacks, optimization, algorithms.

ComputationMechanical, dynamic, thermal, aerodynamics, composite materials, crack propagation (3D XFEM, VCCT), fatigue.

Development testsMeasurement instruments and calibration, analysis, borescope inspection, tool design, special machines.

Operating supportProduction concessions and in-service support, lifetime extension, feedback database.

Local partnershipsSupport for research programs and tests carried out by Russian universities and laboratories (Tsa-GI, CIAM), as well as support for the manufacture of machined parts.

Smartec Moscow

Petrovskiy boulevard, 12, bat.4

127051 Moscow - Russia

tel.: +7(499) 429-01-08

fax: +7(499) 429-01-06

Mail: contact@dosmartec.ru

Smartec Samara

Rue Bouyanova, 1

443041 Samara- Russia

tel.: +7(846) 273 43 55, 303 03 43

fax: +7(846) 273 43 56

Driving innovation of aeroengines

We contribute to the SaM146®, LEAP®, CFM56®, Silvercrest® and other civil aircraft engines.

SMARTEC THE DEDICATED DESIGN OFFICE