SmartBank PRO - Split Charging

Merlin Equipment Limited, Unit 4, Cabot Business Village, Poole, Dorset, BH17 7BA, United Kingdom

T: +44 (0) 1202 697979 F: +44 (0) 1202 691919 W: www.merlinequipment.com

SmartBank PRO is the most advanced stand-alone split

charging device available. Utilising industry accepted “Best

Method” split charging, SmartBank PRO introduces no volt-

age drop, does not force feed batteries and allows capacity

sharing between battery banks to stretch battery run-times

to the max. On board DSP (Digital Signal Processing) pre-

vents it being confused by transient loads and built in Data-

logging allows you to track system performance and tune it

to maximise charge efficiency.

SmartBank PRO can be batch programmed by PC—ideal for

fitting across large fleets. Suitable for SRCS systems.

• Advanced Split Charging for larger systems & profes-

sional users

• Manual and Computer Adjustment of Split Charge

Settings and built in data-logging

• Charge Prioritising & Capacity Sharing - allows you

to prioritise charge order and share spare engine

battery capacity with auxiliaries

• 8 x programmable inputs & outputs to allow easy

integration of alarms, interlocks, dual station emer-

gency parallel switches and automatic reset of flat

battery protection systems

• Suitable for 2 or 3 battery banks

Installation Examples: Installation Example:

SmartBank PRO is available

for 2 or 3 battery bank in-

stallations. The SmartBank

Contactors are Ignition Pro-

tected and rated to IP66.

Contactors and settings can

be configured to prioritise

charging.

Parallel

Switch

Parallel

Switch

CPU

Engine

Contactor

Contactor Conta-

ctor

CPU

Engine

Engine

Battery

Auxiliary

Batteries

Auxiliary

Batteries

Engine

Battery

Auxiliary

Batteries 2

Auxiliary

Loads 1

Auxiliary

Loads 2

Auxiliary

Loads

SmartBank PRO - Split Charging

Merlin Equipment Limited, Unit 4, Cabot Business Village, Poole, Dorset, BH17 7BA, United Kingdom

T: +44 (0) 1202 697979 F: +44 (0) 1202 691919 W: www.merlinequipment.com

All specifications are provided in best possible faith but may be subject to change without notice. The Merlin Logo, slogan “The Power People” and M-Power are trade marks of Merlin Equipment Limited.

All business is transacted according to our Standard Terms & Conditions, a copy of which is available upon request.

12 VOLT MODELS 24 VOLT MODELS

PART # 04-8011 04-8012 04-8013 04-8014

NUMBER OF BATTERY BANKS 2 3 2 3

CONTACTOR CURRENT - CONTINUOUS 200A

CONTACTOR CURRENT - 5 MINS 250A

CONTACTOR CURRENT - CRANKING (EMEGENCY PARALLEL) 725A

POWER CONSUMPTION <10mA <5mA

CONNECT/DISCONNECT VOLTAGE ADJUSMENT RANGE Fully adjustable

TIME ADJUSTMENT RANGE Fully adjustable

CPU DIMENSIONS LxWxH MM (INCHES) 68 x 110 x 32 (2.67 x 4.33 x 1.26)

CPU WEIGHT GRAMMES (POUNDS) - EX CABLES 178 (0.39)

CONTACTOR DIMENSIONS LxWxH MM (INCHES) 91 x 50 x 39 (3.59 x 1.97 x 1.54)

CONTACTOR WEIGHT GRAMMES (POUNDS) 375 (0.83)

COMPLIANCE EMC2002/95/EC, CE, ISO7637-2, SAE J1171

E-MARK CERTIFICATION YES YES YES YES

Specifications:

Other Parts:

The optional PC Interface kits al-

lows: programming of advanced

features & alarms, datalogging,

real-time monitoring & system

diagnosis as well as batch pro-

gramming for multiple units. Sup-

plied with free software, Seri-

al:USB Converter and adaptor ca-

ble.

OEM Versions:

SmartBank PRO is available it’s

component parts for large volume

OEM customers. Also available are

custom looms, pre-programming

and your own specification of

plugs/sockets for integration into

existing wiring looms.

Supplied with 1x (twin battery bank

system) or 2x (triple battery bank

system) IP66 contactors.

IP66 Waterproof Emergency Parallel

Switch (Supplied). Multiple switches

can be supplied for where dual sta-

tion control may be required.