Small Business Wireless Portfolio

8/3/2019 Small Business Wireless Portfolio

1/25

2009 Cisco Systems, Inc. All rights reserved.Small Business TG 1

SBBU Small BusinessWireless Portfolio


2/25


Wireless Access Point portfolio

WAP200E

WAP200

WAP4410NWET200

Wireless Bridge

802.11g 802.11n

Outdoor

Indoor


3/25


S

ecurity

Performance/Mgm

t

Access Point Business Focus

Cisco Small Business solution purpose-built to meet the needs of the

small businessesSpecific features are:

Multiple BSSIDs - Solution acts as multiple APs each serving adifferent wireless network or VLAN. Can use for secure Businessnetwork and Guest Access

802.1q VLANs - Multiple VLANs keep traffic separate on the LANsideWPA2 Enterprise Secure, centralized authentication using aRadius

New Client and New AP detection alerts administrator whennew Access Points and clients enter the airspace

WMM QoS Wireless Quality of ServiceGigabit Interface on 11n high performance

802.11F Roaming Mobility for Wireless clients while connected

Auto-channel Selection Selects optimal channel for bestperformance

SNMP Monitoring from an SNMP Management station


4/25


Qo

SandRange

802.1p QoS to WMM mapping

Mapping of Wired to wireless QoS maintains consistent Voice/Videoquality across both domains

WDS

Wireless Bridging for building-to-building applications

Power

POE Flexibly install AP in optimal locations

U-APSD optimizes battery power usage of connected WIFI phones

Additional Small Business Features

Power


5/25


Wireless Solution Example

Key Features:

802.11g WiFi with PoE

Multiple SSID->VLAN Mapping

Security and QoS

802.1x, WPA, WMM

Multiple AP ModesAP, P to P, P to MP

WAP200PoE or AC/DC Power

Data SSIDVoice SSID

CustomerData

WiFiIP Phone

SRW224G4P

Managed PoE SW

WAP200E WAP200E

Guest SSID

Internet

Router/

Gateway

Guest


6/25


WAP4410N Overview

Small Business focused Wireless-N (IEEE 802.11n Draft 2.0compliant)

Key FeaturesMultiple BSSIDs (4) Segment wireless network amongst workgroups & guests

Wireless Distribution System (WDS) Bridging and Repeater capabilities forextended reach and deployment scenarios.

Robust security capabilities such as WPA2, an 802.1x supplicant, Rogue APDetection

Key Differentiators WDS, Multiple BSSIDs, 802.1xsupplicant, VLANs, QoS, WMM

Availability Now Shipping


7/25


SecurityWi-Fi Protected Setup (WPS)

802.1x supplicant for wired LAN interface

Wireless Client Isolation between SSIDs

Multiple BSSIDs optional HTTP RedirectRogue AP detection

Advanced Technologies

Wireless Distribution System (WDS)

Supports 802.11n Draft v2.0

IPv6 Support

WMM to 802.1p QoS (Layer-2 prioritization)

Wireless Load Balancing

Product & Feature Enhancements


8/25


WAP4410N - Features & Benefits1. Feature: Wireless-N Draft 2.0

Benefit: Maintains throughput at much greater range withoutinterruption and increased interoperability.

Wireless-N Draft 2.0 Certified (Wi-Fi)

MIMO: Multiple input / Multiple output using 3x3 (Tx x Rx) Antennas

Wi-Fi Certified WMM, U-APSD (WMM Power Save), WPA(2)

2. Feature: Rogue AP detection

Benefit: Notifies the administrator when unapproved Access Pointsare detected within the airspace. Monitor devices being used in thenetwork and in the vicinity of the business

3. Feature: 802.1x Supplicant Benefit: Allows AP to authenticate to the wired network via RADIUS

4. Feature: HTTP redirect

Benefit: Allows the display an HTTP Splash screen or companynetwork usage policy when clients associate with the AP


9/25


Features & Benefits

5. Feature: IPv6 Benefit: Delivering the infrastructure to support IPv6-enabled

applications. Peer-to-peer applications like Meetingspace in Vistaoperates efficiently with IPv6 - uses IPv4 as a last resort

SBBU has IPv6 functionality across switches, routers, NAS, Wireless,Cameras, etc.

Dual IPv4/IPv6 stack allows for transitioning of a network to IPv6 in acontrolled fashion

6. Feature: Multiple BSSIDs

Benefit: Solution acts as multiple APs each serving a different

wireless network or VLAN. Can use for secure Business networkand Guest Access

7. Feature: Power over Ethernet (PoE)

Benefit: Flexibility to install AP in optimal and hard-to-reachlocations by sharing power and data on a single cable.


10/25


Features & Benefits

8. Feature: WPS (WiFi Protected Setup) Benefit: A WiFi Alliance certification for simple and secure setup of

a wireless network.

9. Feature: WMM PowerSave (U-APSD)

Benefit: optimizes battery power usage of connected WiFi phonesand other mobility devices.

10. Feature: WPA2 Enterprise

Benefit: Secure, centralized authentication using RADIUS

11. Feature: VLANs

Benefit: Multiple VLANs keep traffic separate on the LAN network

For example separate Sales, Marketing, Admin & Engineering orData, Voice, Video, and Guests on individual VLANs.


11/25


Features & Benefits

12. Feature: Spanning Tree

Benefit: Supports 802.1d Spanning Tree protocol to preventloops when using WDS links in a redundant fashion for faulttolerance

13. Feature: WDS (Wireless Distribution System)

Benefit: Support for Wireless Bridging for building-to-buildingapplications and Repeater mode for extended reach of thewireless network

14. Feature: Load Balancing

Benefit: This capability allows the connections to APs in thenetwork to be spread across multiple APs

15. Feature: Automatic channelSelection

Benefit: On boot up, the AP selects the least congested channel,

facilitating optimal performance of the wireless network


12/25


WAP200 Business Wireless-G AP

Low-Cost, Feature-Rich Solution For Price-Sensitive

Environments

Key Features

Multiple BSSIDs

Strong QoS 802.1p/q and WMM

POE + External Power

WPA2, WPA-ENT, WPA-PSK

SSID to VLAN mapping

Removable antennas

Advanced Wireless Features

Roaming

Load Balancing

Auto-Channel Selection

Key Differentiators 1x2 MIMO, Multiple BSSIDs, VLANs, WMM,Auto-channel Selection, Removable Antennas


13/25


WAP200E Outdoor Wireless AP Interior Access Point and Exterior Wireless Access Point

Key Features:

POE PD power means AP can be powered from a POEswitch

1x2 MIMO better coverage and range

QoS (WMM, 802.1p), VLANs, WPA2, 802.1x

Multiple BSSIDs; Roaming and Auto-channel selection

NEMA IP53 Weatherproof housing (WAP200E)

Internal Directional Antenna

Key Differentiators 1x2 MIMO, Multiple BSSIDs, VLANs,WMM, Auto-channel Selection

Now Shipping


14/25


Product DifferencesProduct WAP200 WAP200E WET200 WAP2000 WAP4410N

Ethernet speed 10/100 10/100 10/100 10/100 GigabitWireless Type 802.11g 802.11g 802.11g 802.11g 802.11g/n# Ports 1 1 5 1 1POE POE or AC POE or AC POE or AC POE or AC POE or ACMIMO 1x2 1x2 1x2 1x2 2x3# Ports 1 1 5 1 1MBSSIDs 4 4 No 4 4802.1q VLAN support Yes Yes Yes Yes Yes802.1x client authentication Yes Yes Yes Yes YesWPA/2 PSK and ENT Yes Yes Yes Yes Yes802.1x AP Authentication No No No No Yes

Secure Management (HTTPS) Yes Yes Yes Yes YesWMM Yes Yes Yes Yes Yes802.1p Yes Yes Yes Yes YesRemovable Antennas Yes Yes Yes Yes Yes

Rogue AP detection Yes Yes N/A Yes Rogue AP

Multiple Modes AP,Repeater,

Bridge

AP,Repeater,

Bridge

Client Only AP, Repeater,Bridge

AP,Repeater,

Bridge, Client

Roaming Yes Yes No Yes Yes

IPv6 Host - Management No No No No YesHTTP Redirect No No No No YesWPS No No No No YesLoad Balancing No No No No YesSpanning Tree No No No No YesCLI support No No No No YesMetal Casing No No No Yes NoLinksys One Ready No No No Yes NoAuto Channel Selection Yes Yes No Yes YesList Price $163 $571 $157 $214 $240


15/25


Wireless Security Monitoring

Developed by Cisco-LinksysProvides rogue AP and client detection

Support on WAP4400N and WPC4400N, and WAP200/E +200-series Clients both clients and AP required

AP and clients work as wireless monitoring probes

Most solutions rely on the AP only

Using clients increases coverage area

Light-weight client utility replaces expensivemanagement server

Status reports provide:

Channel usage

SSIDs in use

Alerts users of new AP and Client

No alerts for existing devices


16/25


Security Monitoring - New AP Detection

New APWAP4400N

WAP4400N


17/25


WET200 Wireless Bridge Wireless Bridge with integrated 5-port switch

Solution pairs with WAP200 and WRV200

Only product with integrated 5-port switch on the market

Key Features:

POE PD power means Bridge can be powered from a POE switch

1x2 MIMO better coverage and rangeQoS (WMM, 802.1p), VLANs, 802.1x, WPA2 security

Removable antennas

Key Differentiators POE, 1x2 MIMO, QoS, VLANs, WPA2,Multiple Ethernet ports

Now Shipping


18/25


200-Series Client Adapters

Client solution to pair with WAP200 and WRV200

3 FlavorsWMP200 PCI Wireless Adapter

WPC200 Cardbus Wireless Adapter

WUSB200 USB Wireless Adapter

1x2 MIMO provides increased rangeRangebooster

Wireless 802.11G Clients with Business features

WPA2 (ENT and PSK), WPA (ENT and PSK), WEP

Higher Throughput

Rogue Detection (when paired with WAP200)

WPC200 WUSB200WMP200


19/25


Wireless Adapters Comparison

Product WPC200 WMP200 WUSB200

Wireless Type 802.11g 802.11g 802.11g

MIMO 1x2 1x2 1x2

New AP/Client(Wireless SecurityMonitor)

Yes Yes Yes

802.1x Yes Yes Yes

WEP Yes Yes Yes

WPA Yes Yes YesWPA2 Yes Yes Yes


20/25


Antennas HGA9N

Omni-Directional antenna for:

WAP200E

WAP54GPE

9 dBi Antenna Gain

3600 Radius

Lightning Protector and Weatherproof

HGA7S

Omni-directional antenna for:

WAP200

WET200

7 dBi Antenna gain


21/25


Backup


22/25


Access Point Mode

AP Mode supported on all CiscoSmall Business Access Points

Network wired or wireless devices tonetwork backbone

Primary Functionality Wirelesslyconnect Clients to network

Multiple SSIDs and BSSIDs VirtualAPs

With Multiple APs in a singlenetwork:

Roaming using IAPP - roam in up to

4 seconds so not conducive forroaming of WIFI phones

Auto-channel Selection minimizeinterference between APs

Wireless Security Monitor detectsnew APs and Clients Roam


23/25


WDS (Wireless Distribution System)Bridging and Repeater Mode

WAP200Wireless-G Access Point

Supported on WAP200/2000, WAP200E,WRV200

Network wired or wireless devices to networkbackbone from areas to which theres no cabling:

Warehouses

Conference Room

Labs

Connect Buildings Close Together

Connect to Ethernet switch for large number ofdevices

Scale to a larger area with Repeater Mode

Repeater can provide expanded coverage for

Multiple BSSIDs

Repeater Mode - Throughput reduced 50% foreach repeater hop

Disadvantage: Can only use with products usingsame chipsets

In bridge mode, wireless clients CANNOTconnect to the AP

RepeaterMode

RepeaterMode


24/25


WDS Wireless Distribution SystemRepeater Mode Diagram

An AP can bridge up to 3 APs in Bridge or Repeater modes

Throughput is cut in half at every hop

Up to 3 levels deep

Max 16 Repeaters


25/25


Bridging with WET200 Network wired devices to network

backbone from areas to wheretheres no cabling:

Warehouses,

Conference Room

Labs

Connect Buildings CloseTogether

Connect multiple Desktop PCs,Laptops, Printers or IP Phonesacross a wireless network

For Mixed Vendor Environmentsor products with differentWireless chipsets

Port Mirror for troubleshooting

Disadvantage: Does not provide

connectivity for Wireless Clients

WET200

WAP200Wireless-G Access Point

WET200

Documents

Small Business Wireless Portfolio