Service Instructions Syntron® Electromagnetic Vibratory Feeder Model: BF-01-C

BF-01-CS

1

Syntron® BF-01-C/BF-01-CS Electromagnetic Vibratory Feeder ♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦SPECIFICATIONS♦♦♦PARTS LIST Thank you for buying your equipment from Syntron Material Handling. This manual will help you to understand how your equipment operates and what is required to maintain peak performance. Please read it thoroughly and keep it on file for reference. Your satisfaction is important to us, so please direct any comments to our Marketing Communications Department. CHECKING THE CURRENT When using an analog clamp on meter to read the current of the feeder, the meter reading must always be multiplied by a value of 1.7 due to the wave characteristics of the feeder when operating. When using a true RMS meter, the current is as indicated. All current readings must be taken at the control. OPERATING SPECIFICATIONS

Maximum Trough Weight: 12 lbs (5.45 kg) Minimum Trough Weight: 6 lbs (2.72 kg)

Trough Stroke Range: 12 lb trough- .055 to .060 inches (1.4 to 1.5 mm)

6 – 8 lb trough- .070 inches (1.78mm)

Minimum Natural Frequency: 3900 Vpm (60 Hz) 3250 Vpm (50 Hz)

* Maximum Current Rating: (Nameplate) 2.3 Amps (115V/50/60 Hz) 1.2 Amps (230V/60 Hz) 1.0 Amps (230V/50 Hz)

*Refer to the instructions above. TORQUE SPECIFICATIONS

ITEM DRY LUBRICATED J, Y 350 in-lb (39.6 Nm) 260 in-lb (29.4 Nm)

2

PARTS LIST –BF-01-C & BF-01-CS ELECTROMAGNETIC FEEDERS ITEM DESCRIPTION PART NO QTY A Back Plate .......................................................................................A-109715-A 1 B Magnet Assembly (115V/60 Hz) .....................................................B-121765-M ] Magnet Assembly (230V/60 Hz) .....................................................B-121765-N ] Magnet Assembly (115V/50 Hz) .....................................................B-121765-P ] 1 Magnet Assembly (230V/50 Hz) .....................................................B-121765-Q ] Only C Gasket ............................................................................................A-117879 1 D * Nameplate ....................................................................................A-62245 1 E Armature & Base Assembly ............................................................B-121763 1 F Disc Spring .....................................................................................0013X125 3 G Trough Mounting Bracket ...............................................................C-121769-A 1 H Air Gap Adjustment Screw (Nickel Plated) .....................................H0407610 ] 1 Air Gap Adjustment Screw (Stainless Steel) ..................................H0424702 ] Only J Cap Screw, Hex Hd., Ni. Pl. (3/8”-16 x 1 1/4”) ................. H0310322 ] 7 Cap screw Hex Hd., Ni. Pl. (3/8”-16 x 1”) ........................ H0310222 ] Only Cap Screw Hex Hd., S.S (3/8”-16 x 1 1/4”) ...................... H0340826 ] 3 Cap Screw Hex Hd., S.S. (3/8”-16 x 1”) ........................... H0340726 ] Only K Front Spring Clamp .......................................................... A-109729-A ] 4 Front Spring Clamp .......................................................... A-192451 ] Only

3

PARTS LIST con’t. ITEM DESCRIPTION PART NO QTY M Front Spring. ..................................................................... A-109727-B01 ] As Front Spring . .................................................................... A-109727-A01 ] Req’d. N Front Spring Spacer ......................................................... A-109728 As Req’d P Foot Mounting Bracket ..................................................... A-121770 1 Q * Caution Label (Dics Elec.) .............................................. A-125694 1 R Rubber Foot ...................................................................... 0207X033 ] 4 Rubber Foot (Stud Type) .................................................. 0207X040 ] Only Rubber Foot (Sandwich Type) .......................................... 0207X037 ] Acorn Nut Chr. Pl. (1/4”-20) .............................................. H0101607 ] 2 Acorn Nut S.S. (1/4”-20) ................................................... H0110502 ] Only Lock Washer, NI. Pl. (1/4”) ............................................... H0116656 ] 2 Lock Washer, S.S. (1/4”) .................................................. H0116602 ] Only S Mach. Screw, Rd. Hd., Br. (#10-32 x 3/8”) ....................... H0203102 1 Lock Washer, Ni. Pl. (#10) ................................................ H0112458 ] 1 Lock Washer, S.S. (1/4”) .................................................. H0112402 ] Only T Cable Grip ........................................................................ 0102X001 ] 1 U Cable Assembly ................................................................ C-160136-C 1 Butt Connector .................................................................. 0202X038 2 V Rear Spring Spacer .......................................................... A-114711 8 Rear Spring Spacer .......................................................... A-192452 Only W Rear Spring....................................................................... A-150725-A As Rear Spring....................................................................... A-150725-B Req’d. Rear Spring....................................................................... A-150725-C X Rear Spring Clamp (Bottom) NiPl..................................... A-59177 ] 1 Rear Spring Clamp (Bottom) S.S. .................................... B-192454 ] Only Y Hex Nut, Ni. Pl. (3/8”-16) .................................................. H0103059 2 Hex Nut, S.S. (3/8”-16). .................................................... H0111580 ] Only Z Rear Spring Clamp Bar (Top) Ni.Pl.. ................................ A-150726 ] 1 Rear Spring Clamp Bar (Top) S.S .................................... A-192453 ] Only AA Rear Spring Spacer .................................................... A-111097 ] As.Req’d BB *Adjustment Label ............................................................ A-195774 1 CC Cap Screw, Hx Hd, Ni.Pl. (3/8-16 x ¾”) ............................ H0310023 ] 4 Cap Screw, Hx Hd, S.S. (3/8-16 x ¾”) ............................. H0310003 ] Only

Do not remove or paint over safety labels or the nameplate. If safety labels need replaced, contact Syntron Material Handling for an additional supply free of charge.

4

Important

Syntron Material Handling reserves the right to alter at any time, without notice and without liability or

other obligations on its part, materials, equipment specifications, and models. Syntron Material

Handling also reserves the right to discontinue the manufacture of models, parts, and components

thereof.

Your satisfaction is very important to us. Please direct any comments, questions, or concerns to

our Marketing Communications Department.

Corporate Office

P.O. Box 1370 Tupelo, Mississippi 38802

Phone: 662.869.5711 Fax: 662.869.7449

Tupelo 2730 Hwy 145 South Saltillo, Mississippi 38866 Phone: 662.869.5711 Fax: 662.869.7493 Toll Free: 800.356.4898 info@syntronmh.com

Changshu #2 Road No. 1 Changshu Export Processing Zone Changshu, Jiangsu, China 215513 Phone: +86 0512.52299002 Fax: +86 0512.52297228

info@syntronmh.com

Form No. SM0529_122214 Printed in U.S.A