Upload
vuongque
View
218
Download
2
Embed Size (px)
Citation preview
Find a contact near you by visiting www.suezwatertechnologies.com and clicking on “Contact Us.” *Trademark of SUEZ; may be registered in one or more countries. ©2017 SUEZ. All rights reserved. CB1316EN.docx May-16
Water Technologies & Solutions customer benefits
sludge mixing systems
technology overview & applications • High Solids digestion: 6-8% digester solids
concentration • Applicable in sewage sludge or biowaste digestion • Suitable for new build or retrofit • Installation in concrete or steel tanks
optimize anaerobic digester assets • > 90% active digester volume • Higher biogas yield • Effectively blend feeds with full dispersion
< 2 hours • Mixing energy input less than 2W/m3 • No moving parts in the digester • SUEZ backed Performance guarantee for mixing
and active volume SUEZ backed Performance guarantee for mixing and active volume
Sequential Gas Mixing – High Solids AD Made Easy
Page 2 CB1316EN.docx
technology overview & applications • Mix thick sludges up to 8% TS • Utilizes sequential air injection • Sludge holding tanks & Post digestion storage
tanks • Circular or rectangular geometry • Install in concrete or steel tanks
simple cost-effective mixing • Guaranteed mixing > 90% of tank volume • Eliminate needs for tank cleanouts • Low net energy: Single 7.5kW drive • Not susceptible to fibrous materials or ragging • Low maintenance components, all external to
tank
technology overview & applications • Applicable for up to 6% dry solids • Ideal for tanks and digesters with low aspect
ratios
• Retrofit applications • Install in concrete or steel tanks
industry familiarity • Guaranteed mixing > 90% of tank volume • Equipment ground mounted for easy access • Simple and easy to maintain • Design validation through CFD modeling
AirMix* – Any Sludge Tank Mixed
Pump Mixing – Robust & Simple
Proven Reliability & Performance on > 300 Mixing Sites