Upload
lamkhuong
View
258
Download
2
Embed Size (px)
Citation preview
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
All trademarks followed by ® are registered trademarks of SLAVIA GRATINGS s.r.o.
SLAVIA GRATINGS®
TATRAGRATE®
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
ABOUT SLAVIA GRATINGS s.r.o.
SLAVIA GRATINGS s.r.o. - European
manufacturer of composite gratings TATRAGRATE and other composite products used for: ladder systems, railings, ship ladders, hits, ramps, pedestrian and vehicle coatings zones, floors, fences and other conveyor lines. The company's factory is located in Slovakia in HANUŠOVCE NAD / TOPĽOU and open to visitors. Currently, our company has the largest production capacity in Europe.
The production is certified according to ISO 9001. Gratings and composite structures are used: for fuel - energy complex, in industrial and civil construction, food industry, agriculture, shipbuilding, ports, and road - transport construction. Composite gratings characterized by high corrosion and chemical resistance, fire resistance, durability, high ratio strength / weight, strength static deflection and dynamic impact, high-slip and dielectric
properties, simplicity of installation and aesthetic appearance. These products do not require maintenance and service. SLAVIA GRATINGS s.r.o. can produce order in a short time, carry out cutting to size, to provide all necessary advice to the client.
PRODUCTION FORMATS AND CAPACITY (for information only)
AVAILABLE TYPES Panel Size
(Mold’s size) Mesh Size x
Height Total Quantity
of molds
Daily capacity
panels sqm
ECONOM STANDART
ECONOM NON FIRE
ISO NON FIRE
FOOD NON FIRE
VINYL NON FIRE
4047x1007 19x19x30 2 24 97,80
4046x1525 38x38x30 1 9 55,53
4038x1000 38x38x30 2 24 96,91
3660x1220 38x38x30 1 12 53,58
3660x1220 38x38x38 1 12 53,58
4038x1000 38x38x38 2 24 96,91
4046x1525 38x38x38 1 9 55,53
4047x1247 19x19x38 2 24 121,11
1225x3665 50x50x50 1 12 53,88
4038x1000 38x38x26 2 24 96,91
Sales Manager informs about delivery time for every request separately. Special services: 1. Cut to size. On our cutting department we provide cutting GRP gratings to size according requested dimension or AutoCAD drawings. 2. Blocking molds. Blocked mold is used to optimize costs while cutting. On the standard mold forms we can provide shorter dimensions with blocking molds on the length or width.
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
CERTIFICATES
ISSUED BY DESCRIPTION NO VALIDITY COMPLIES WITH
CERTITECH Accredited management systems
certified body.
Operating Quality management system
in the extent of production and sale of glass reinforced
plastic gratings GRP
Reg N: 117-
245119-13
05.09.2013
4.09.2016
EN ISO 9001:2008
Building testing and research institute, Slovak Republic
EN 45011.
Product certificate No.
00048/TSUS/P/2012
22.10.2012
-
PN SLAVIA GRATINGS Factory standards, max load at 1% deflection, chemical resistance..
Electrotechnical testing institute – Czech
Republic
Floor grates, VINYL NON FIRE Conductive
No.: 1120933
04.12.2012 31.12.2015 CSN EN 61340-4-1:2004, CSN 33 2030:2004, cl 2.8
FIRES s.r.o, member of EGOLF, Slovak
Republic
Classification of reaction to fire
ECONOM NON FIRE,
ISO NON FIRE,
VINYL NON FIRE
+protocols
FIRES-CR-112-12-AUPE
FIRES-CR-
110-12-AUPE
FIRES-CR-
109-12-AUPE
26.06.2012 in accordance with EN
13501-1 + A1:2009
VUSAPL, a.s. Certification Body for Products certification
Composite grate TATRAGRATE ECO-
FR, ISO-FR is suitable for contact
with drinking water + protocols
0014/VUSAPL/2012
21.06.2012 21.06.2017
Regulation of the Ministry of Health of the Slovak Republic No 550/2007
Coll.,Decree of the Government of the Slovak
Republic No.354/2006 Coll., Edict No.
1799/2003-100 Food Codex of the Slovak
Republic
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
GRP GRATINGS TATRAGRATE
General description
Manufacturing process GRP Gratings are produced in special matrix molds. The grating consists of three main components: Resin Mix (2), Fiberglass (1), Pigments (mixing of pigment and resin). The percentage of resin and fiberglass - 70% to 30%. Fiberglass is located in TWO directions. After the material hardens, the GRP gratings are pressed out of the mold. There are several types of resin mixes with Orthophthalic Poliester Resin, Isophthalic Poliester Resin, Vinyl ester resin.
Dimensions Every form/mold has its own dimensions: panel size, mesh size, height. The gratings have a square mesh pattern to obtain multidirectional strength. GRP Gratings panels can be produced in standard panel sizes or mold can be blocked along the length direction and width direction. Surface Type Default surface of GRP Gratings is concave. A range of surfaces are available: gritted surface (GRIT), gratings with covered gritted top (HLU), conductive surface (CONDUCTIVE). Advantages and Varied applications TATRAGRATE GRP gratings: Varied applications High weather resistance High corrosion resistance High chemical resistance Multidirectional strength High strength – to - weight ratio Impact resistance Fire resistance High levels of comfort for walking and standing Slip-resistant Does not conduct electricity No spark formation Low thermal diffusivity UV resistant Long life span Maintenance Free Cost effectiveness Authorized for contact with drinking water Easily stored
Usage areas Chemical & Petroleum Printing & Dyeing Offshore, Marine Power, Shipyard Pharmaceutical Metallurgical Transportation Decoration Refining Electronics Food and beverage Pulp & Paper Water and Waste Water Treatment Leisure Range of applications Offshore Platforms Stair Treads Floorings Screens Wash Racks, Battery Racks Bridges, Walkway Trench Covers Pit Covers Tower Packing Supports Root Machinery Guards Ramps Cable Trough Covers
Color Standardly mixes all have default colors. But it is possible to produce products without adding color pigment. In this case we receive transparent products. We can change the default color to another, such as corporate color - experts will select the color you want from the RAL palette. Performance term of special order is up to one month. More detailed information on request.
Benefits of color pigment usage: Not fade Not require painting Great visual effect Improve working efficiency The penetration of UV-radiation is prevented by using color pigments
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
Mesh Structures
The gratings have a square mesh pattern to obtain multidirectional strength (load bar in both directions). There are Mesh Size and Inside Mesh Size. X-1,Y-1 - Mesh Size Х-2, Y-2 - Inside Mesh Size h - Height (THICKNESS)
MESH STRUCTURES: THICKNESS (mm) х Mesh Size (mm х mm)
26x38x38 30x38x38 38x38x38
50x50x50 30x19x19 38x19x19
THICKNESS: 26mm Mesh: 38mm x 38mm. Side А: Inside Mesh Size 32x32mm, Rib width 6mm Side В: Inside Mesh Size 33x33mm, Rib width 5mm THICKNESS: 30 mm Mesh: 38mm x 38mm. Side А: Inside Mesh Size 32x32mm, Rib width 7mm Side В: Inside Mesh Size 33x33mm, Rib width 5mm THICKNESS: 38 mm Mesh: 38mm x 38mm. Side А: Inside Mesh Size 32x32mm, Rib width 7mm Side В: Inside Mesh Size 33x33mm, Rib width 5mm THICKNESS: 50 mm Mesh: 50mm x 50mm. Side А: Inside Mesh Size 43x43mm, Rib width 8mm Side В: Inside Mesh Size 45x45mm, Rib width 6mm THICKNESS: 30 mm Mesh: 19mm x 19mm. Side А: Inside Mesh Size 13x13mm, Rib width 5-бmm Side В: Inside Mesh Size 33x33mm, Rib width 5mm
Mini-mesh Grating (19x19) has a 12mm x 12mm open mesh area. The smaller opening prevents objects as small as 13mm from
falling through and complies with the European 15mm ball failing test requirement. The smaller holes also offer smooth movement for small wheeled trolleys, wheelchairs etc.
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
Standard Panel Sizes
# HEIGHT
mm Mesh Size
mm Standard Panel Size
mm
1 26 38 x 38 4038 x 1000
2 30 19 x 19 4047 x 1007
3 30 38 x 38 4046 x 1525
4 30 38 x 38 4038 x 1000
5 30 38 x 38 3660 x 1220
6 38 19 x 19 4047 x 1247
7 38 38 x 38 3660 x 1220
8 38 38 x 38 4038 x 1000
9 38 38 x 38 4046 x 1525
10 50 50 x 50 3665 x 1225
RESIN MIXES
GRP GRATINGS ECONOM STANDART Orthophthalic resin mix without fire retardant reinforced with continuous glass roving.
Resin Type: Glass Type: Fire retardant:
Orthophthalic Polyester resin
E - glass Without Fire retardant
Application: Glass / resin mix ratio:
For use in water/ wastewater or air-ageing applications, light industrial application and in the wave zone areas of offshore platforms where the environment is moderate. It still offers superior performance to traditional flooring products such as steel, aluminum and wood and is the most economical resin available.
30 / 70 % by weight
Standard color:
RAL 7040 Grey
Available products: Available mesh structures: Default option: Operating temperature:
GRP Gratings, GRP Plates, GRP Stairtreads
38x38x26 38x38x30 38x38x38 19x19x30 19x19x38 50x50x50
Concave Not electrical conductive
-60 °C/+110°C for inside and outside applications (Ultra violet resistant)
Tolerances: Available surfaces: Other:
Length, width: ± 1 mm Thickness: ± 2 mm Warping: < 10 mm / m Weight: ± 5% Color deviation: Close to specified RAL code.
Grit HLU HLU+Conductive Conductive
Low thermal conductivity Voids, streaking and chip-outs according to SLAVIA GRATINGS standards
Recommendations:
We recommend to use ECONOM STANDART products in corrosion medium, when fire resistance not required and low price needed.
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
GRP GRATINGS ECONOM NON FIRE
Orthophthalic resin mix with fire retardant reinforced with continuous glass roving.
Resin Type: Glass Type: Fire retardant:
Orthophthalic Polyester resin
E - glass With Fire retardant
Application: Glass / resin mix ratio:
For use in water/ wastewater or air-ageing applications, light industrial application and in the wave zone areas of offshore platforms where the environment is moderate. It still offers superior performance to traditional flooring products such as steel, aluminum and wood and is the most economical resin available.
30 / 70 % by weight
Standard color:
RAL 7040 Grey
Available products: Available mesh structures: Default option: Operating temperature:
GRP Gratings, GRP Plates, GRP Stairtreads
38x38x26 38x38x30 38x38x38 19x19x30 19x19x38 50x50x50
Concave Not electrical conductive
-60 °C/+110°C for inside and outside applications (Ultra violet resistant)
Tolerances: Available surfaces: Other:
Length, width: ± 1 mm Thickness: ± 2 mm Warping: < 10 mm / m Weight: ± 5% Color deviation: Close to specified RAL code.
Grit HLU HLU+Conductive Conductive
Low thermal conductivity Voids, streaking and chip-outs according to SLAVIA GRATINGS standards
Recommendations:
We recommend to use ECONOM NON FIRE products in corrosion medium, when fire resistance required and low price needed.
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
GRP GRATINGS ISO NON FIRE Isophthalic resin mix with fire retardant reinforced with continuous glass roving.
Resin Type: Glass Type: Fire retardant:
Isophthalic Polyester resin
E - glass With Fire retardant
Application: Glass / resin mix ratio:
Isophthalic Polyester resin with a non-flammable component, for applications in a hostile environment. Industrial grade corrosion resistance and fire retardant. For use in the environments of middle concentration inorganic acid, inorganic alkali, etc.
30 / 70 % by weight
Standard color:
RAL 6010 GREEN
Available products: Available mesh structures: Default option: Operating temperature:
GRP Gratings, GRP Plates, GRP Stairtreads
38x38x26 38x38x30 38x38x38 19x19x30 19x19x38 50x50x50
Concave Not electrical conductive
-60 °C/+110°C for inside and outside applications (Ultra violet resistant)
Tolerances: Available surfaces: Other:
Length, width: ± 1 mm Thickness: ± 2 mm Warping: < 10 mm / m Weight: ± 5% Color deviation: Close to specified RAL code.
Grit HLU HLU+Conductive Conductive
Low thermal conductivity Voids, streaking and chip-outs according to SLAVIA GRATINGS standards
Recommendations:
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
GRP GRATINGS FOOD NON FIRE Isophthalic resin mix with fire retardant reinforced with continuous glass roving.
Resin Type: Glass Type: Fire retardant:
Isophthalic Polyester resin
E - glass With Fire retardant
Application: Glass / resin mix ratio:
Isophthalic Polyester resin with a non-flammable component for a food-processing industry and animal industries. Industrial grade corrosion resistance and fire retardant. For use in the environments of middle concentration inorganic acid, inorganic alkali, etc.
30 / 70 % by weight
Standard color:
RAL 7035 LIGHT GREY
Available products: Available mesh structures: Default option: Operating temperature:
GRP Gratings, GRP Plates, GRP Stairtreads
38x38x26 38x38x30 38x38x38 19x19x30 19x19x38 50x50x50
Concave Not electrical conductive
-60 °C/+110°C for inside and outside applications (Ultra violet resistant)
Tolerances: Available surfaces: Other:
Length, width: ± 1 mm Thickness: ± 2 mm Warping: < 10 mm / m Weight: ± 5% Color deviation: Close to specified RAL code.
Grit HLU HLU+Conductive Conductive
Low thermal conductivity Voids, streaking and chip-outs according to SLAVIA GRATINGS standards
Recommendations:
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
GRP GRATINGS VINYL NON FIRE Vinyl Ester resin mix with fire retardant reinforced with continuous glass roving.
Resin Type: Glass Type: Fire retardant:
Vinyl Ester Resin E - glass With Fire retardant
Application: Glass / resin mix ratio:
Vinyl Ester resin with a non-flammable component for application in a hostile environment. Superior corrosion resistance and fire retardant. Environments with serious corrosion issues.
30 / 70 % by weight
Standard color:
RAL 2002 RED
Available products: Available mesh structures: Default option: Operating temperature:
GRP Gratings, GRP Plates, GRP Stairtreads
38x38x26 38x38x30 38x38x38 19x19x30 19x19x38 50x50x50
Concave Not electrical conductive
-60 °C/+110°C for inside and outside applications (Ultra violet resistant)
Tolerances: Available surfaces: Other:
Length, width: ± 1 mm Thickness: ± 2 mm Warping: < 10 mm / m Weight: ± 5% Color deviation: Close to specified RAL code.
Grit HLU HLU+Conductive Conductive
Low thermal conductivity Voids, streaking and chip-outs according to SLAVIA GRATINGS standards
Recommendations:
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
SURFACE TYPES
Concave Surface The Concave surface - original type of grating surface which has curves inwards during the thermosetting process.
The concave edges received at by this process ensure good anti slip properties. The Concave surface can be applied to any GRP grating mesh or panel size, for any resin system. Concave Grating is more suited to low foot traffic areas and is particularly suitable for hygiene applications where a high standard of slip resistance is needed and ease of cleaning is a consideration.
Weight, kg/sqm
# Base
Mesh Size x Height mm
Concave
Weight kg/sqm
1 38x38x26 12,5
3 38x38x30 15
4 38x38x38 19
5 19x19x30 19
6 19x19x38 21,9
7 50x50x50 22
Examples of GRP Gratings with Concave Surface
Mesh size, mm: 19x19 Mesh size, mm: 38x38 Mesh size, mm: 50x50
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
GRIT Surface The GRIT surface is applied to the concave surface together with a resin.
Grit Type: Silica sands containing> 98% SiO2. Silica sand from European supplier is manufactured according to ISO 9000 and ISO 14000.
Standard grit size: 1. Small (default): Standard grit size: 0,6 – 1,2 mm 2. Medium: Standard grit size: 1,0 – 1,8 mm 3. Mixed: Standard grit size: 0,6 – 1,8 mm
Type of resin: Gritted gratings in top are painted with vinylester mix
Additional thickness: 1 - 2 mm. Additional weight: 0,2 kg/m
2
Weight, kg/sqm
# Base
Mesh Size x Height mm
SURFACE TYPE
GRIT HLU+3mm HLU+6mm
Weight kg/sqm
Weight kg/sqm
Weight kg/sqm
+0,2 kg/sqm +6,9 kg/sqm +13,8 kg/sqm
1 38x38x26 12,7 19,4 26,3
3 38x38x30 15,2 21,9 28,8
4 38x38x38 19,2 25,9 32,8
5 19x19x30 19,2 25,9 32,8
6 19x19x38 22,1 28,8 35,7
7 50x50x50 22,2 28,9 35,8
1mm HLU Weight = 2,3 kg/sqm
Example: Weight [GRP Gratings 38x38x26 HLU+5mm] = Weight [GRP Gratings 38x38x26 Concave] +
+ [Height of HLU Plate] x [1mm HLU Weight] = 12,5 + 5 x 2,3 = 24,0 kg/sqm
Examples of GRP Gratings with GRIT Surface
GRP Gratings + GRIT (open mesh)
GRP Gratings HLU + GRIT (covered)
This type of grating has one of the highest degrees of slip resistance measured for a walking surface.
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
HLU Surface The HLU Surface (covered top) is typically 3mm or 6mm thick (other thick is available on request) and is bonded to the grating panel after manufacture. This creates a strong but lightweight covered panel. All panels are available with gritted finish (Please see TDS SURFACE GRIT). Ideally suited to service trenches, access pits, gully covers, walkways and cable troughs etc.
All types and sizes of grating are available with covered tops. Weight, kg/sqm
# Base
Mesh Size x Height mm
SURFACE TYPE
HLU+3mm HLU+6mm
Weight kg/sqm
Weight kg/sqm
+6,9 kg/sqm +13,8 kg/sqm
1 38x38x26 19,4 26,3
3 38x38x30 21,9 28,8
4 38x38x38 25,9 32,8
5 19x19x30 25,9 32,8
6 19x19x38 28,8 35,7
7 50x50x50 28,9 35,8
1mm HLU Weight = 2,3 kg/sqm
Example: Weight [GRP Gratings 38x38x26 HLU+5mm] = Weight [GRP Gratings 38x38x26 Concave] +
+[Height of HLU Plate] x [1mm HLU Weight] = 12,5 + 5 x 2,3 = 24,0 kg/sqm Cutting and Installation The molding and curing of covered gratings can produce internal stresses that may cause the panel to warp. In some cases, this warp age may increase when covered panels are cut into smaller pieces. In certain situations, this out-of-flat condition can result in tripping hazards and other problems. This is one of the reasons we strongly recommend the use of hold down methods, such as clips. In situations where hold-down procedures are not possible, we do not recommend covered panels. Examples of GRP Gratings with HLU Surface
GRP Gratings HLU + GRIT (covered)
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
Conductive gritted surface GRP Gratings (GRP Plates) with Conductive Surface is formulated with a carbon black surface, eliminating hazardous static electricity when properly grounded. Available in all resin finishes, TATRAGRATE Gratings are primarily used in the high-tech electronic industries, munitions and arsenal manufacturing plants and other spark sensitive environments where sophisticated equipment may be damaged due to static electricity.
Conductive gritted GRP Gratings have been developed to drain off the build-up of dangerous static electricity in applications where static electricity present safety concerns. Top layer: Vinyl Ester mix with 20% Graphite Color top layer: Black Electric strength: < 60 * 10
3 Ω /m
The conductive gritted surface can be applied to any GRP molded grating, incl. HLU, mesh or panel size, to an resin system. Weight, kg/sqm
# Base
Mesh Size x Height mm
SURFACE TYPE
Conductive Conductive HLU+3mm Conductive HLU+6mm
Weight kg/sqm
Weight kg/sqm
Weight kg/sqm
+0,2 kg/sqm +6,9 kg/sqm +13,8 kg/sqm
1 38x38x26 12,7 19,4 26,3
3 38x38x30 15,2 21,9 28,8
4 38x38x38 19,2 25,9 32,8
5 19x19x30 19,2 25,9 32,8
6 19x19x38 22,1 28,8 35,7
7 50x50x50 22,2 28,9 35,8
Examples of GRP Gratings with Conductive Surface
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
Cutting & Installation Ways of obtaining the necessary dimensions:
Ways Extra cost Description
Standard panel sizes
No extra cost
GRP Gratings panels produced in standard panel sizes
Blocking molds
Extra cost for blocking
Mold can be blocked along the length direction and width direction.
This option is beneficial only if Extra Cost for Blocking is less than Extra Cost for Standard cutting.
Cu
t to
siz
e
Standard Cutting
Cost for cutting Cost of trimming (if they consist)
Extra Cutting
Extra cost Cost of trimming
Cutouts from grating
Extra Cutting D
Extra cost Cost of trimming
Cutting of circle or another shapes
Bi-directional cross-grating structure allows various options for cutting without additional support, treatment. The strengthening of edges is not necessary. When cutting panels for panels with CLOSED MESH should be guided by Closed mesh table.
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
How to cut GRP Gratings? GRP Gratings or GRP Plates can be cut using large vertical saws or small saw.
SMALL SAW LARGE VERTICAL SAW
All recommendations are in Handling Manual. SLAVIA GRATINGS TATRAGRATE can be cut or molded to our client is specifications. The cut edges are sanded and sealed with resin to ensure corrosion resistance. As part of our service and commitment to our clients SLAVIA GRATINGS TATRAGRATE will be happy to provide a competitive quotation for installation of your Grating if required. 1. Tolerance per ful panel: +/- 3mm in length and width direction, +/- 1,5mm in thickness direction
Warp tolerance: Length: 4,5mm per meter, Wigth:2,5mm 2. Tolerance for cutting: Length: +/- 5mm, Width: +/- 5mm, Circle: +/- 2mm
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
Some recommendations for TATRAGRATE Gratings installation
The recommended minimum width of the
supporting area
THICKNESS The width of the supporting part “B”
26 mm 30 mm
30 mm 30 mm
38 mm 40 mm
50 mm 50 mm
Assembling gratings for Trough Cover
THICKNESS Max span
26 mm 600 mm
30 mm 1000 mm
38 mm 1100 mm
50 mm 1400 mm
For correct installation please use Deflection Table and Clips Specification.
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
Closed Mesh Table GRP gratings whose external dimensions deviate from production dimensions might not have closed edges. Special Closed Mesh Table was made when closed edges are required.
Open Edges / Mesh Closed Edges / Mesh
26 mm Height
Height Mesh size Panel size Closed mesh
26mm 38x38
4038
45, 83, 122, 160, 198, 236, 275, 313, 351, 390, 428, 466, 504, 543, 580,619, 658,696, 734, 772,810,849,888, 926, 964, 1003,1040,1079,1118,1156, 1194, 1233, 1270, 1309, 1348, 1386, 1424, 1462, 1501, 1539, 1578, 1616, 1654, 1692, 1731, 1769, 1807, 1846, 1884, 1922, 1961, 1998, 2037, 2075, 2113, 2152, 2191, 2229, 2267, 2306, 2344, 2382, 2421, 2459, 2497, 2536, 2574, 2612, 2651, 2689, 2727, 2766, 2804, 2842, 2881, 2920, 2958, 2996, 3034, 3073, 3111, 3149, 3188, 3226, 3265, 3304, 3342, 3380, 3418, 3457, 3496, 3534, 3572, 3610, 3649, 3687, 3725, 3764, 3802, 3841, 3879, 3917, 3956, 3994, 4032.
1000 45, 84, 121, 159, 197, 236, 274, 312, 349, 388, 426, 464, 502, 541, 578, 617, 655, 693, 731, 769, 807, 846, 884, 922, 960, 999.
26mm 38x38
1220 44, 83, 119, 157, 196, 234, 272, 310, 349, 387, 425, 463, 501, 539, 577, 615, 653, 691, 729, 767, 805, 843, 881, 919, 957, 995, 1033, 1071, 1109, 1147, 1186, 1223.
3660
45, 83, 121, 159, 197, 235, 273, 311, 349, 387, 426, 463, 501, 539, 578, 616, 654, 692, 730, 768, 806, 844, 882, 920, 958, 997, 1034, 1073, 1111, 1149, 1187, 1225, 1263, 1301, 1339, 1377, 1415, 1454, 1492, 1530, 1568, 1606, 1644, 1682, 1720, 1758, 1796, 1834, 1872, 1910, 1948, 1986, 2024, 2062, 2100, 2138, 2176, 2214, 2253, 2291, 2329, 2367, 2405, 2443, 2481, 2519, 2557, 2596, 2633, 2672, 2710, 2748, 2786, 2824, 2862, 2900, 2938, 2976, 3014, 3052, 3090, 3128, 3166, 3204, 3242, 3280, 3318, 3356, 3394, 3432, 3470, 3508, 3546, 3584, 3622, 3660
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
30 mm Height
Height Mesh size Panel size Closed mesh
30mm 19x19
4047
46, 86, 126, 166, 206, 246, 286, 326, 366, 406, 446, 486, 526, 566, 606, 646, 686, 726, 766, 806, 846, 886, 926, 966, 1006, 1046, 1085, 1125, 1165, 1205, 1245, 1285, 1325, 1365, 1405, 1445, 1485, 1525, 1565, 1605, 1645, 1685, 1725, 1765, 1805, 1845, 1885, 1924, 1964, 2004, 2044, 2084, 2124, 2164, 2204, 2244, 2284, 2324, 2364, 2404, 2444, 2484, 2524, 2564, 2604, 2644, 2684, 2724, 2764, 2803, 2843, 2883, 2923, 2963, 3003, 3043, 3083, 3122, 3162, 3202, 3242, 3282, 3322, 3362, 3402, 3442, 3482, 3522, 3562, 3602, 3642, 3682, 3722, 3762, 3802, 3842, 3882, 3922, 3961, 4002, 4042
1007 47, 87, 127, 167, 207, 247, 287, 327, 367, 407, 446, 486, 526, 567, 607, 647, 686, 726, 766, 806, 846, 886, 925, 965, 1005
30mm 38x38
4046
46, 84, 122, 159, 198, 236, 274, 312, 350, 388, 426, 464, 502, 540, 578, 616, 654, 692, 730, 769, 807, 845, 883, 921, 959, 997, 1035, 1073, 1111, 1149, 1187, 1226, 1264, 1302, 1340, 1378, 1416, 1454, 1492, 1530, 1568, 1606, 1644, 1683, 1721, 1758, 1797, 1834, 1911, 1949, 1987, 2025, 2063, 2101, 2139, 2177, 2215, 2253, 2291, 2329, 2367, 2405, 2444, 2482, 2520, 2558, 2596, 2634, 2672, 2710, 2748, 2786, 2824, 2862, 2900, 2938, 2976, 3015, 3053, 3091, 3129, 3167, 3205, 3243, 3281, 3319, 3357, 3395, 3433, 3471, 3509, 3547, 3585, 3623, 3661, 3700, 3737, 3775, 3814, 3852, 3890, 3928, 3966, 4004, 4043
1525 46, 84, 122, 160, 198, 236, 274, 312, 350, 388, 426, 464, 502, 540, 578, 616, 654, 692, 730, 768, 806, 844, 882, 920, 958, 996, 1034, 1072, 1110, 1147, 1185, 1224, 1262, 1300, 1338, 1376, 1414, 1456, 1490, 1528
30mm 38x38
4038
46, 84, 123, 161, 199, 238, 276, 314, 353, 391, 429, 468, 506, 544, 583, 621, 659, 698, 736, 774, 813, 851, 889, 928, 966, 1004, 1043, 1081, 1119, 1158, 1196, 1234, 1272, 1311, 1349, 1387, 1426, 1464, 1502, 1541, 1579, 1617, 1656, 1694, 1732, 1771, 1809, 1847, 1886, 1924, 1962, 2001, 2039, 2077, 2116, 2154, 2192, 2231, 2269, 2307, 2346, 2384, 2422, 2461, 2499, 2537, 2576, 2614, 2653, 2691, 2729, 2768, 2806, 2844, 2883, 2921, 2959, 2998, 3036, 3074, 3113, 3151, 3189, 3228, 3226, 3304, 3343, 3381, 3419, 3458, 3496, 3534, 3573, 3611, 3649, 3688, 3726, 3765, 3803, 3841, 3880, 3918, 3956, 3994, 4032
1000 46, 83, 122, 159, 198, 236, 274, 312, 350, 388, 426, 464, 503, 540, 579, 617, 655, 693, 732, 770, 809, 847, 884, 922, 960, 999
30mm 38x38
3660
46, 84, 122, 160, 198, 236, 274, 312, 350, 388, 426, 464, 502, 541, 579, 617, 655, 693, 731, 769, 807, 845, 883, 921, 959, 997, 1035, 1073, 1111, 1150, 1188, 1226, 1264, 1302, 1340, 1378, 1416, 1454, 1492, 1530, 1568, 1606, 1644, 1682, 1720, 1759, 1797, 1835, 1873, 1911, 1949, 1987, 2025, 2063, 2101, 2133, 2177, 2215, 2253, 2291, 2329, 2368, 2406, 2444, 2482, 2520, 2558, 2596, 2634, 2672, 2710, 2748, 2786, 2824, 2862, 2900, 2938, 2976, 3014, 3052, 3091, 3129, 3167, 3205, 3243, 3281, 3319, 3357, 3395, 3433, 3471, 3509, 3547, 3585, 3624, 3662
1220 46, 84, 122, 160, 198, 235, 273, 311, 349, 387, 425, 463, 501, 539, 577, 615, 653, 691, 729, 767, 805, 843, 881, 919, 957, 995, 1033, 1071, 1109, 1147, 1185, 1222
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
38 mm Height Height Mesh size Panel size Closed mesh
38mm 19x19
4047
47, 87, 127, 167, 207, 247, 287, 327, 367, 407, 447, 487, 527, 567, 607, 647, 687, 727, 767, 807, 847, 887, 927, 967, 1007, 1047, 1087, 1127, 1167, 1207, 1247, 1287, 1327, 1367, 1407, 1447, 1487, 1527, 1567, 1607, 1647, 1687, 1727, 1767, 1807, 1847, 1887, 1927, 1967, 2007, 2047, 2087, 2127, 2167, 2207, 2247, 2287, 2327, 2367, 2407, 2447, 2487, 2527, 2567, 2607, 2647, 2687, 2727, 2767, 2807, 2847, 2887, 2927, 2967, 3007, 3047, 3087, 3127, 3167, 3207, 3247, 3287, 3327, 3367, 3407, 3447, 3487, 3527, 3667, 3607, 3647, 3687, 3727, 3767, 3807, 3847, 3887, 3926, 3967, 4006, 4046
1247 47, 87, 127, 167, 207, 247, 287, 327, 367, 407, 447, 487, 527, 567, 608, 648, 688, 728, 768, 808, 848, 888, 928, 968, 1008, 1048, 1088, 1128, 1168, 1208, 1248
38mm 38x38
3660
45, 83, 122, 160, 198, 235, 274, 312, 350, 388, 426, 464, 502, 540, 578, 617, 655, 692, 730, 768, 806, 844, 883, 921, 951, 997, 1035, 1073, 1111, 1149, 1187, 1225, 1264, 1301, 1339, 1377, 1415, 1454, 1491, 1524, 1567, 1605, 1643, 1681, 1720, 1758, 1796, 1834, 1872, 1910, 1948, 1986, 2024, 2062, 2100, 2139, 2176, 2114, 2252, 2290, 2329, 2367, 2405, 2442, 2481, 2519, 2557, 2595, 2633, 2672, 2709, 2747, 2786, 2823, 2862, 2900, 2938, 2976, 3014, 3052, 3090, 3128, 3166, 3204, 3242, 3280, 3319, 3357, 3394, 3433, 3471, 3509, 3547, 3585, 3623, 3661
1220 44, 81, 119, 157, 196, 233, 271, 309, 347, 385, 423, 461, 499, 538, 576, 614, 652, 689, 727, 766, 803, 841, 879, 917, 955, 998, 1031, 1069, 1107, 1144, 1183, 1221
38mm 38x38
4038
46, 84, 123, 161, 199, 238, 276, 315, 353, 391, 429, 468, 506, 545, 583, 621, 660, 699, 737, 775, 814, 852, 890, 929, 967, 1006, 1044, 1082, 1121, 1159, 1198, 1236, 1274, 1313, 1351, 1389, 1427, 1466, 1504, 1542, 1581, 1619, 1658, 1696, 1734, 1773, 1811, 1849, 1888, 1926, 1965, 2003, 2041, 2080, 2118, 2157, 2195, 2233, 2272, 2310, 2349, 2387, 2425, 2464, 2502, 2540, 2579, 2617, 2655, 2694, 2732, 2770, 2809, 2847, 2885, 2923, 2962, 3000, 3039, 3077, 3115, 3153, 3192, 3230, 3269, 3307, 3345, 3384, 3422, 3460, 3499, 3537, 3576, 3614, 3652, 3690, 3729, 3767, 3805, 3843, 3882, 3921, 3959, 3998, 4036
1000 46, 84, 122, 160, 198, 236, 274, 312, 351, 389, 427, 465, 503, 541, 579, 618, 656, 694, 732, 770, 808, 846, 884, 923, 961, 1000
38mm 38x38
4046
46, 84, 122, 160, 198, 236, 274, 312, 350, 388, 426, 464, 503, 541, 578, 616, 654, 692, 731, 769, 807, 845, 883, 921, 959, 997, 1035, 1073, 1111, 1149, 1187, 1225, 1263, 1301, 1340, 1378, 1416, 1454, 1492, 1530, 1568, 1606, 1644, 1682, 1720, 1753, 1796, 1834, 1872, 1910, 1948, 1986, 2024, 2062, 2100, 2138, 2176, 2214, 2252, 2291, 2328, 2367, 2405, 2443, 2481, 2519, 2557, 2595, 2633, 2671, 2710, 2742, 2785, 2823, 2862, 2900, 2938, 2976, 3014, 3051, 3089, 3128, 3166, 3204, 3242, 3280, 3318, 3356, 3394, 3432, 3470, 3509, 3547, 3584, 3623, 3660, 3699, 3737, 3775, 3814, 3851, 3889, 3928, 3966, 4003, 4042
1525 46, 84, 122, 159, 198, 236, 273, 311, 349, 387, 425, 463, 501, 539, 577, 615, 653, 691, 729, 767, 805, 843, 881, 914, 957, 995, 1032, 1070, 1108, 1146, 1184, 1222, 1260, 1298, 1336, 1374, 1412, 1450, 1488, 1526
50 mm Height
Height Mesh size Panel size Closed mesh
50mm 50x50
3665
60, 111, 161, 212, 263, 314, 365, 416, 466, 517, 567, 618, 668, 720, 770, 821, 872, 923, 973, 1024, 1075, 1125, 1176, 1227, 1277, 1328, 1379, 1430, 1480, 1531, 1591, 1633, 1683, 1734, 1786, 1836, 1887, 1937, 1988, 2039, 2090, 2140, 2191, 2242, 2293, 2344, 2394, 2445, 2495, 2546, 2597, 2648, 2699, 2749, 2800, 2851, 2902, 2952, 3003, 3054, 3104, 3155, 3205, 3256, 3307, 3358, 3408, 3459, 3510, 3561, 3611, 3663
1225 61, 111, 161, 212, 263, 313, 363, 414, 464, 515, 566, 616, 667, 717, 768, 818, 869, 920, 970, 1021, 1072, 1123, 1174, 1226
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
Deflection Table Deflection Tables for TATRAGRATE Molded Gratings 38х38х26
Dimensions [mm]
SPAN [mm]
Concentrated load [kg]
Uniform Load [kg/m2]
Line Load [kg/305 mm]
1% deflection
Maximum recommended
Ultimate capacity
1% deflection
ECONOM STANDART,
ECONOM NON FIRE,
ISO NON FIRE,
FOOD NON FIRE
VINYL NON FIRE
1% deflection
MESH: 38х38
THICKNESS: 26
300 1136 7347 7956 15545 34800 506
400 738 3214 4478 8746 19744 288
500 529 1693 2868 5598 12721 186
600 402 1002 1992 3888 8882 130
700 319 644 1464 2857 6556 96
800 261 438 1121 2187 5039 74
900 219 313 886 1728 3996 59
1000 187 231 718 1400 3247 48
1100 162 176 594 1157 2691 40
1200 141 137 499 972 2267 33
1300 116 109 425 829 1936 26
1400 96 88 367 714 1673 -
1500 81 72 319 622 1461 -
Concentrated load
There are data of the concentrated load data causing a deflection of 1% at a certain span. The load is applied at the centre of a full panel, which is supported on two sides. Gratings supported on 3 or 4 sides will have less deflection. This table is only valid for the uncut panels. In case other deflections are specified, just multiply the specified percentage deflection with the 1% load data.
Uniform load
There are data of uniform load data for two s ides supported grating at a certain span: - the given data is for a deflection of 1 % - the max. recommended load - ultimate capacity. - This data is also valid for panels which are cut.
In case other deflections are specified, just multiply the specified percentage deflection with the 1% load data to determine the max. load. To calculate the deflections at max. recommended and ultimate capacity the same calculation method can be used . Deflection is proportional with load.
Line Load
The data in this table gives a 1% deflection for a wide strip of 305 mm width. The load is applied at the centre of this strip. This data will be used to determine the deflection on cutted panels for concentrated loads, supported on two sides . For gratings with a larger width, the load can easily be calculated by multiplying the width with the given load, divided by 305 mm.
Using special clips to connect the unsupported gratings together, will reduce deflection.
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
Deflection Tables for TATRAGRATE Molded Gratings 19х19х30, 38х38х30
Dimensions [mm]
SPAN [mm]
Concentrated load [kg]
Uniform Load [kg/m2]
Line Load [kg/305 mm]
1% deflection
Maximum recommended
Ultimate capacity
1% deflection
ECONOM STANDART,
ECONOM NON FIRE,
ISO NON FIRE,
FOOD NON FIRE
VINYL NON FIRE
1% deflection
MESH: 19х19
THICKNESS: 30
MESH: 38х38
THICKNESS: 30
300 1400 14844 13379 26141 58519 865
400 998 6664 7989 15602 35223 518
500 767 3581 5356 10455 23759 348
600 619 2155 3863 7539 17223 251
700 517 1403 2931 5717 13121 191
800 441 968 2307 4499 10366 150
900 384 697 1868 3642 8421 122
950 361 600 1695 3306 7655 111
1000 339 520 1546 3015 6992 101
1100 303 399 1304 2541 5910 85
1200 274 313 1115 2174 5069 73
1300 249 250 966 1883 4401 63
1400 229 204 846 1649 3862 55
Concentrated load
There are data of the concentrated load data causing a deflection of 1% at a certain span. The load is applied at the centre of a full panel, which is supported on two sides . Gratings supported on 3 or 4 sides will have less deflection. This table is only valid for the uncut panels. In case other deflections are specified, just multiply the specified percentage deflection with the 1% load data.
Uniform load
There are data of uniform load data for two s ides supported grating at a certain span: - the given data is for a deflection of 1 % - the max. recommended load - ultimate capacity. - This data is also valid for panels which are cut.
In case other deflections are specified, just multiply the specified percentage deflection with the 1% load data to determine the max. load. To calculate the deflections at max. recommended and ultimate capacity the same calculation method can be used . Deflection is proportional with load.
Line Load
The data in this table gives a 1% deflection for a wide strip of 305 mm width. The load is applied at the centre of this strip. This data will be used to determine the deflection on cutted panels for concentrated loads, supported on two sides . For gratings with a larger width, the load can easily be calculated by multiplying the width with the given load, divided by 305 mm.
Using special clips to connect the unsupported gratings together, will reduce deflection.
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
Deflection Tables for TATRAGRATE Molded Gratings 19x19x38, 38х38х38
Dimensions [mm]
SPAN [mm]
Concentrated load [kg]
Uniform Load [kg/m2]
Line Load [kg/305 mm]
1% deflection
Maximum recommended
Ultimate capacity
1% deflection
ECONOM STANDART,
ECONOM NON FIRE,
ISO NON FIRE,
FOOD NON FIRE
VINYL NON FIRE
1% deflection
MESH: 38х38
THICKNESS: 38
300 2190 26809 14278 38807 61369 1288
400 1533 10599 8031 21830 37082 758
500 1162 5163 5139 13971 25088 502
600 927 2867 3569 9703 18231 359
700 765 1744 2622 7129 13918 270
800 648 1135 2007 5458 11016 211
900 560 776 1586 4312 8963 170
1000 492 552 1285 3493 7453 140
1100 437 406 1062 2887 6307 117
1200 389 305 892 2426 5416 100
1300 325 217 760 2067 4708 86
1400 275 182 655 1782 4135 75
1500 236 146 571 1553 3664 66
Concentrated load
There are data of the concentrated load data causing a deflection of 1% at a certain span. The load is applied at the centre of a full panel, which is supported on two sides . Gratings supported on 3 or 4 sides will have less deflection. This table is only valid for the uncut panels. In case other deflections are specified, just multiply the specified percentage deflection with the 1% load data.
Uniform load
There are data of uniform load data for two s ides supported grating at a certain span: - the given data is for a deflection of 1 % - the max. recommended load - ultimate capacity. - This data is also valid for panels which are cut.
In case other deflections are specified, just multiply the specified percentage deflection with the 1% load data to determine the max. load. To calculate the deflections at max. recommended and ultimate capacity the same calculation method can be used . Deflection is proportional with load.
Line Load
The data in this table gives a 1% deflection for a wide strip of 305 mm width. The load is applied at the centre of this strip. This data will be used to determine the deflection on cutted panels for concentrated loads, supported on two sides . For gratings with a larger width, the load can easily be calculated by multiplying the width with the given load, divided by 305 mm.
Using special clips to connect the unsupported gratings together, will reduce deflection.
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
Deflection Tables for TATRAGRATE Molded Gratings 50х50х50
Dimensions [mm]
SPAN [mm]
Concentrated load [kg]
Uniform Load [kg/m2]
Line Load [kg/305 mm]
1% deflection
Maximum recommended
Ultimate capacity
1% deflection
ECONOM STANDART,
ECONOM NON FIRE,
ISO NON FIRE,
FOOD NON FIRE
VINYL NON FIRE
1% deflection
MESH: 50х50
THICKNESS: 50
300 2734 46840 31583 31583 54419 2618
400 2077 18922 17766 17766 37886 1593
500 1677 9371 11371 11371 26722 1084
600 1409 5278 7897 7897 20091 791
700 1216 3247 5802 5802 15786 606
800 1070 2132 4442 4442 12810 481
900 956 1472 3510 3510 10654 393
1000 864 1056 2843 2843 9035 328
1100 789 782 2350 2350 7784 278
1200 720 590 1974 1974 6793 239
1300 616 423 1682 1682 5994 208
1400 533 357 1451 1541 5337 183
1500 466 287 1264 1264 4791 163
Concentrated load
There are data of the concentrated load data causing a deflection of 1% at a certain span. The load is applied at the centre of a full panel, which is supported on two sides . Gratings supported on 3 or 4 sides will have less deflection. This table is only valid for the uncut panels. In case other deflections are specified, just multiply the specified percentage deflection with the 1% load data.
Uniform load
There are data of uniform load data for two s ides supported grating at a certain span: - the given data is for a deflection of 1 % - the max. recommended load - ultimate capacity. - This data is also valid for panels which are cut.
In case other deflections are specified, just multiply the specified percentage deflection with the 1% load data to determine the max. load. To calculate the deflections at max. recommended and ultimate capacity the same calculation method can be used . Deflection is proportional with load.
Line Load
The data in this table gives a 1% deflection for a wide strip of 305 mm width. The load is applied at the centre of this strip. This data will be used to determine the deflection on cutted panels for concentrated loads, supported on two sides . For gratings with a larger width, the load can easily be calculated by multiplying the width with the given load, divided by 305 mm.
Using special clips to connect the unsupported gratings together, will reduce deflection.
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
Packing
TYPE: 1. Cut to size panels, stair treads
TYPE: 2. Standard panels
For GRP Gratings packing we use wooden pallets, steel bands, carton corner profile and carton boards of paper. Packing Table for Standard Panels
Panel size Height Mesh size
Total surface
Weight
Pallet marking
Pallet size
Panel quantity
sqm panel height width lenth
full pallet height
full pallet weight
per 1 pallet
mm mm mm mm sqm kg kg mm mm mm
mm kg pcs
4038 1000 26 38x38 4,038 12,5 50,48 1 15 4080 1040 25 795 1539,4 30
4046 1525 30 38x38 6,170 15 92,55 2 15 4080 1560 25 615 1876 20
4038 1000 30 38x38 4,038 15 60,57 1 15 4080 1040 25 825 1660,39 27
3660 1220 30 38x38 4,465 15 66,98 3 15 3700 1250 25 675 1498,56 22
4047 1007 30 19x19 4,075 19 77,43 1 15 4080 1040 25 825 2115,61 27
4038 1000 38 38x38 4,038 19 76,72 1 15 4080 1040 25 851 1712,84 22
4046 1525 38 38x38 6,170 19 117,23 2 15 4080 1560 25 623 1900,68 16
4047 1247 38 19x19 5,047 21,9 110,53 4 15 4080 1280 25 661 1904,01 17
3660 1220 38 38x38 4,465 19 84,84 3 15 3700 1250 25 851 1891,48 22
3665 1225 50 50x50 4,490 22 98,78 3 15 3700 1250 25 815 1605,48 16
4038 1000 30 38x38 4,038 15 60,57 1 15 4080 1040 25 825 1660,39 27
4038 1000 38 38x38 4,038 19 76,72 1 15 4080 1040 25 851 1712,84 22
TATRAGRATE GRP Gratings, GRP Plates, GRP stairtreads, and other products are shipped both by container, groupage or common carrier and dedicated truck. As standard: side loading, stacking - max two full pallets (acc. table↑). If required please ask Customer Service Manager with request for logistics and transportation info for your order.
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
GRP PLATES TATRAGRATE
General description
h: Height, mm W x L: Panel Size, mm Max Height: 10mm Max Panel Size: 3900 x 1500 mm
Manufacturing process GRP Plates are produced in special molds with flat surface. The plates consists of three main components: Resin Mix, Fiberglass fabric, Pigments (mixing of pigment and resin). There are several types of resin mixes with Orthophthalic Poliester Resin, Isophthalic Poliester Resin, Vinyl ester resin. Surface Type Default surface of GRP Plates is gritted. Additional surface are available: conductive surface (CONDUCTIVE). Color Standardly mixes all have default colors. But it is possible to produce products without adding color pigment. In this case we receive transparent products. We can change the default color to another, such as corporate color - experts will select the color you want from the RAL palette. Performance term of special order is up to one month. More detailed information on request.
Benefits of color pigment usage: Not fade Not require painting Great visual effect Improve working efficiency The penetration of UV-radiation is prevented by using color pigments
Advantages: High weather resistance High corrosion resistance High chemical resistance Does not conduct electricity No spark formation Low thermal diffusivity UV resistant Long life span Maintenance Free Cost effectiveness Easily stored
Application: Facade cladding Kick plates Fences Protective covers
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
GRP STAIRTREADS TATRAGRATE
General description
Manufacturing process GRP Stairtreads are produced in special matrix molds or in way of cut to size of GRP Gratings. The GRP Stairtreads consists of three main components: Resin Mix, Fiberglass (Fiberglass fabric for nosing), Pigments (mixing of pigment and resin). The percentage of resin and fiberglass - 70% to 30%. There are several types of resin mixes with Orthophthalic Poliester Resin, Isophthalic Poliester Resin, Vinyl ester resin. GRP Stairtreads are supplied without nosing or with sanded and colored nosing in different widths.
Stairtread
Type
A Without nosing. All edges could be closed or open*.
B With nosing on the 1 side (top, bottom, left or right).
Edges (top, right, left) could be closed or open*.
C With nosing on the 2 sides (adjacent or opposite sides).
Edges could be closed or open*.
D With nosing on the 3 sides. Edges (top) could be closed or open*.
E With nosing on the 4 sides. All edges are closed*.
* Open edges Closed edges
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
Dimensions Every form/mold has its own dimensions: panel size, mesh size, height. Maximal Width and Length of GRP Stairtreads acc. Standard Panel Sizes
Surface Type Default surface of GRP Stairtreads is concave. A range of surfaces are available: gritted surface (GRIT), gratings with covered gritted top (HLU), conductive surface (CONDUCTIVE). Color
Color of Stairtread Standardly mixes all have default colors. But it is possible to produce products without adding color pigment. In this case we receive transparent products. We can change the default color to another, such as corporate color - experts will select the color you want from the RAL palette. Performance term of special order is up to one month. More detailed information on request. Color of nosing Stairtreads are supplied with solid gritted and colored nosing. Standardly we use Yellow RAL1018, Black 9001 or default color of Stairtread. We can change color of nosing to any corporate color - experts will select the color you want from the RAL palette. Advantages High weather resistance High corrosion resistance High chemical resistance Multidirectional strength High strength – to - weight ratio Impact resistance Fire resistance High levels of comfort for walking and standing Slip-resistant Does not conduct electricity No spark formation Low thermal diffusivity UV resistant Long life span Maintenance Free Cost effectiveness Authorized for contact with drinking water Easily stored
Color of Stairtread
Color of Nosing
Benefits of color pigment usage: Not fade Not require painting Great visual effect Improve working efficiency The penetration of UV-radiation is prevented by using color pigments
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
Clips SELECTION GUIDE:
Gratings Type: [Mesh size] x [Height]
Types of Clips
38x38x26 B26, S26, M26
19x19x30 B1-30, S30
38x38x30 B30, S30, M30
19x19x38 B1-38, S38
38x38x38 B38, S38, M38
50x50x50 M50, S50, B50
HLU Gratings: [Height] Types of Clips
HLU 26+3 B1-26, W26
HLU 30+3 B1-30, W30
HLU 38+3 B1-38, W38
HLU 50+3 B1-50, W50
TYPE OF MATERIALS:
Marking Classification Description
GS Hot dip galvanised steel
Clips are made from HDG - Hot Dip Galvanised Steel. For any installation in an environment without high corrosion risks. Galvanized steel has a much shorter lifespan when it's regularly exposed to rain or seawater.
A2 Stainless Steel A2 type
Clips are made from A2 stainless steel (1.4301, AISI 304). A2 stainless steel —the most common grade of stainless steel. A2 austenitic stainless steel has a good corrosion resistance in normal atmospheric circumstances, in wet environments, oxydizing and organic acids, many alcalic and salt solutions or seawater. This stainless steel type has an percentage of chromium and nickel of 18/8 and is the most common stainless steel type.
A4 Stainless Steel A4 type
Clips are made from A4 stainless steel (1.4401, AISI 316). A4 stainless steel —the second most common grade of stainless steel, represents the most corrosion-resistant steelgroup also referred to as "acid-proof". It is also known as marine grade stainless steel due to its increased resistance to chloride corrosion compared to type A2. It has therefore a better resistance against aggressive media such as seawater, chlorides, oxidizing acids etc.
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
COMPONENT PARTS
Saddle for mesh 50x50
Saddle for mesh 38x38
Special angle for support set
Hilti plate
for mesh 19x19 Recessed plate for mesh 38x38
Excentric clamp
Hook with nut U type clamp
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
B
For GRP Gratings with mesh size 38 x 38mm
Clips press the grating to the supporting beam; Without drilling; Upper part: recessed plate Lower part: excentric clamp
Standard types
Mesh x Height
Connection Set
B26 38x38x26 Bolt M8x50 + Nut
B30 38x38x30 Bolt M8x50 + Nut
B38 38x38x38 Bolt M8x60 + Nut
B1
For GRP Gratings with mesh size 19 x 19mm and HLU (covered 3 mm) gratings
Clips press the grating to the supporting beam; Without drilling; Upper part: Hilti plate Lower part: excentric clamp
Standard types
Mesh x Height Connection Set
B1-26 HLU26+3 Bolt M8x70 + Nut
B1-30 19x19x30, HLU30+3 Bolt M8x70 + Nut
B1-38 19x19x38, HLU38+3 Bolt M8x90 + Nut
B1-50 HLU50+3 Bolt M8x90 + Nut
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
M
For GRP Gratings with mesh size 38 x 38mm
Clips press the grating to the supporting beam; The supporting beam has to be drilled; Upper part:saddle Lower part: none
Standard types
Mesh x Height
Connection Set
M26 38x38x26 Bolt M8x50, nut, washer
M30 38x38x30 Bolt M8x50, nut, washer
M38 38x38x38 Bolt M8x60, nut, washer
M50 50x50x50 Bolt M8x80, nut, washer
Clip M is better for fixing gratings on one place, but after big warping he can damage place around clip. Clip S is more friendly to GRP gratings.
S
For GRP Gratings with mesh size 38 x 38mm and 19 x19mm
Clips press the grating to the supporting beam; The supporting beam has to be drilled; Clip S is suitable for 19x19mm after cut out cross bar in one mesh 38x38mm Upper part: recessed plate /Lower part: none
Standard types
Mesh x Height Connection Set
S26 38x38x26,19x19x26 Bolt M8x50 + Nut
S30 38x38x30,19x19x30 Bolt M8x50 + Nut
S38 38x38x38,19x19x38 Bolt M8x60 + Nut
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
W
For GRP HLU (covered 3mm) gratings
Clips press the grating to the supporting beam; The supporting beam has to be drilled; Upper part: Hilti plate Lower part: none
Standard types
Mesh x Height
Connection Set
W26 HLU26+3 Bolt M8x70, nut, washer
W30 HLU30+3 Bolt M8x70, nut, washer
W38 HLU38+3 Bolt M8x90, nut, washer
W50 HLU50+3 Bolt M8x90, nut, washer
F
For GRP Gratings with mesh size 38 x 38mm
Clips for connecting unsupported grating-endings to each other; Upper part: recessed plate (2pcs) Lower part: U type clamp (1pcs)
Standard types
Mesh x Height
Connection Set
F26 38x38x26 [Bolt M8x50 + Nut] x2pcs
F30 38x38x30 [Bolt M8x50 + Nut] x2pcs
F38 38x38x38 [Bolt M8x50 + Nut] x2pcs
F50 50x50x50 [Bolt M8x60 + Nut] x2pcs
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
Support set for Steps
Support set specially designed for Steps.
Upper part: saddle (4pcs) Lower part: special angles (2pcs) Connection Sets: [Bolt M8x50 + Nut + washer] x 4pcs [Bolt M12x35 + Nut+ washer] x 4pcs
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
MARKING
GRP Gratings Marking
GRP Gratings [MIX TYPE] [MESH SIZE x HEIGHT*] [SURFACE TYPE] [RAL]
GRP Gratings
ECONOM STANDART ECONOM NON FIRE
ISO NON FIRE FOOD NON FIRE VINYL NON FIRE
…
38x38x26 38x38x30 19x19x30 19x19x38 50x50x50
….
Concave
Grit Conductive
HLU+[Plate Height]mm ….
RAL 7040 RAL 7035 RAL 6010
…
* For Gratings with HLU Surface it means HEIGHT of Base Gratings EXAMPLE:
GRP Gratings ISO NON FIRE 38x38x26 Concave RAL7040 GRP Gratings ISO NON FIRE 38x38x26 HLU+6mm RAL7040
GRP Plates Marking
[GRP Plate] [Height, mm]
[MIX TYPE] [SURFACE TYPE] [RAL]
GRP Plate 3mm GRP Plate 6mm
…
ECONOM STANDART ECONOM NON FIRE
ISO NON FIRE FOOD NON FIRE VINYL NON FIRE
…
Grit
Conductive
RAL 7040 RAL 7035 RAL 6010
…
EXAMPLE:
Plate 3mm ECONOM NON FIRE Grit RAL7040
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
GRP Stairtread Marking
GRP Stairtread
[Stairtread TYPE]
[MIX TYPE] [MESH SIZE x
HEIGHT] [SURFACE
TYPE]
[Gratings RAL]
Nosing’s Details: [Nosing’s Widths,
mm Nosing’s RAL]
GRP
Stairtread
A B C D E
ECONOM
STANDART ECONOM NON
FIRE ISO NON FIRE
FOOD NON FIRE
VINYL NON FIRE
…
38x38x26 38x38x30 19x19x30 19x19x38 50x50x50
….
Concave
Grit Conductive HLU+[x]mm
….
RAL 7040 RAL 7035 RAL 6001
…
EXAMPLE:
GRP Stairtread B VINYL NON FIRE 19x19x30 Grit RAL6001, Nosing details: width: 38mm, RAL 1018
Clips Marking
Clips [Clips TYPE] [TYPE OF MATERIALS]
B [X]
B1 - [X] M [X] S [X] W [X] F [X]
Support set for Steps
…
GS A2 A4 …
GS: Hot dip galvanised steel A2: Stainless Steel A2 type A4: Stainless Steel A4 type EXAMPLE:
Clips F38 GS Clips Support set for Steps A4
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
Color Color pigment is a part of the Resin Mix. Standardly mixes all have default colors. But it is possible to produce products without adding color pigment. In this case we receive transparent products. 1. STANDARD COLORS
Every type of gratings has a certain color from RAL palette by default.
RESIN MIX RAL code Description
FOOD NON FIRE
RAL 7035 LIGHT GREY
ECONOM NON FIRE ECONOM STANDART
RAL 7037 GREY
RAL 7040 GREY
ISO NON FIRE
RAL 6010 GREEN
VINYL NON FIRE
RAL 2002 RED
2. FREQUENTLY USED RAL
These pigments may be on stock. Please consult with manager.
RAL code Description
RAL 1018 YELLOW
RAL 5012 BLUE
RAL 9004 BLACK
We can change the default color to another, such as corporate color - experts will select the color you want from the RAL palette. Performance term of special order is up to one month. More detailed information on request. Benefits of color pigment usage:
Not fade Not require painting Great visual effect Improve working efficiency The penetration of UV-radiation is prevented by using color pigments
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
Chemical Resistance Table
Chemical type
Vinyl Ester Isophthalic Orthophthalic
Concentration %
Temperature F/°C
Concentration % Temperature
F/°C Concentration %
Temperature F/°C
Acetic Acid 50 180/82 50 125/52 5 77/25
Aluminum Hydroxide 100 180/82 100 160/71 ALL
Ammonium Chloride ALL 210/99 ALL 170/77 ALL
Ammonium Bicarbonate 50 160/70 15 125/52 ALL -
Ammonium Hydroxide 28 100/38 28 N/R ALL N/R
Ammonium Sulfate ALL 210/99 ALL 170/77 ALL -
Benzene 100 92/40 ALL N/R ALL N/R
Benzoic Acid SAT 210/99 SAT 150/66 ALL 77/25
Borax SAT 210/99 SAT 170/77 SAT 113/45
Calcium Carbide ALL 180/82 ALL 170/77 ALL -
Calcium Nitrate ALL 210/99 ALL 180/82 ALL -
Carbon Tetrachloride 100 92/40 100 N/R 100 N/R
Chlorine, Dry Gas - 210/99 - 140/60 - N/R
Chlorine Water SAT 200/93 SAT 80/27 SAT N/R
Chromic Acid 10 150/65 5 70/21 5 N/R
Citric Acid ALL 210/99 ALL 170/77 ALL 77/25
Calcium Chloride ALL 210/99 ALL 170/77 ALL 104/40
Copper Cyanide ALL 210/99 ALL 170/77 ALL 77/25
Copper Nitrate ALL 210/99 ALL 170/77 ALL -
Ethanol 10 155/82 50 75/24 10 77/25
Ethylene Glycol 100 200/93 100 90/32 100 104/40
Ferric Chloride ALL 210/99 ALL 170/77 ALL 104/40
Ferrous Chloride ALL 210/99 ALL 170/77 ALL 86/30
Formaldehyde 37 140/60 50 75/24 25 86/30
Gasoline 100 180/82 100 75/24 100 95/35
Glucose 100 210/99 100 170/77 ALL
Glycerin 100 210/99 100 150/66 100
Hydrobromic Acid 50 150/65 50 120/49 18
Hydrochloric Acid 37 150/65 37 75/24 10 86/30
Hydrofluoric Acid 10 149/65 - -
Hydrogen Peroxide 30 150/65 5 100/38 5 NR
Lactic Acid ALL 210/99 ALL 170/77 ALL 77/25
Lithium Chloride SAT 210/99 SAT 150/66 ALL
Magnesium Chloride ALL 210/99 ALL 170/77 ALL 104/40
Magnesium Nitrate ALL 210/99 ALL 140/60 ALL 86/30
Magnesium Sulfate ALL 210/99 ALL 170/77 ALL 104/40
Mercuric Chloride 100 210/99 100 150/66 100 104/40
Mercurous Chloride ALL 210/99 ALL 140/60 ALL 104/40
Methacrylic Acid 99 95/35 - -
Methanol 10 183/84 N/R N/R N/R N/R
Nickel Chloride ALL 210/99 ALL 170/77 ALL 104/40
Nickel Sulfate ALL 210/99 ALL 170/77 ALL 104/40
Nitric Acid 20 130/54 20 70/21 20 N/R
TATRAGRATE Specification
SLAVIA GRATINGS s.r.o. Ku Surdoku 8484, str. 08001 Presov, Slovak republic [email protected] www.slaviagratings.eu
Chemical type
Vinyl Ester Isophthalic Orthophthalic
Concentration %
Temperature F/°C
Concentration % Temperature
F/°C Concentration %
Temperature F/°C
Oxalic Acid ALL 210/99 ALL 75/24 ALL N/R
Perchloric Acid 30 100/38 10 N/R 10 N/R
Phosphoric Acid 100 210/99 100 120/49 80 N/R
Potassium Chloride ALL 210/99 ALL 170/77 ALL 104/40
Potassium Dichromate ALL 210/99 ALL 170/77 ALL 77/25
Potassium Nitrate ALL 210/99 ALL 170/77 ALL 104/40
Potassium Sulfate ALL 210/99 ALL 170/77 ALL 104/40
Propylene Glycol ALL 210/99 ALL 170/77 ALL 104/40
Sea Water ALL 210/99 ALL 158/70 ALL 113/45
Sodium Acetate ALL 210/99 ALL 160/71 ALL 104/40
Sodium Bisulfate ALL 210/99 ALL 170/77 ALL
Sodium Bromide ALL 210/99 ALL 170/77 5 -
Sodium Cyanide ALL 210/99 ALL 170/77 5 N/R
Sodium Hydroxide 25 180/82 N/R N/R N/R N/R
Sodium Nitrate ALL 210/99 ALL 170/77 ALL 104/40
Sodium Sulfate ALL 210/99 ALL 170/77 ALL 104/40
Stannic Chloride ALL 210/99 ALL 160/71 ALL 104/40
Sulfuric Acid SO 183/80 25 75/24 10 -
Tartaric Acid ALL 210/99 ALL 170/77 ALL -
Vinegar 100 210/99 100 170/77 ALL -
Vfeter, Distilled 100 180/82 100 170/77 ALL 86/30
Zine Nitrate ALL 210/99 ALL 170/77 ALL 104/40
Zine Sulfate ALL 210/99 ALL 170/77 ALL 104/40
Key
ALL SAT NR -
- any concentration - saturated solutions - not recommended - no information available
All rights reserved by SLAVIA GRATINGS s.r.o. TATRAGRATE
Ku Surdoku 8484, str. 08001 Presov Slovak republic e-mail: [email protected]
http://www.slaviagratings.eu http://www.slaviagratings.com
IČO 45 236 054 / DIČ 2022896590 / IČ DPH SK2022896590 zap.okr.sude m.Prešov vložka čislo 22111/P