Embed Size (px)
Citation preview
SLAG TAURUS
SLAG POT CARRIER
SLAG TAURUS
8 SLAG TAURUS U-FRAME DESIGN
Typical requirements:
– Low height clearance at pick up
– Fast cycle times required
– Pick up from ground level
Vehicle specifications:
– Independent pick up and set down of
slag pots
– Dumping angle up to 130°
– Knocking device available
– Cabin protected by a large canopy
– Cabin located on trailer for better visibility,
drivers comfort and safety
– KISS (KIROW Integrated Safety System)
– Extensive protection covers at trailer
– Wet disk break at front and rear axle
– Hitch and steering in sturdy CAT design
with a steering angle up to 90°
– Low life-time costs
– Low maintenance costs
The Slag Taurus U is available with many
additional optional features.
6 The KIROW Slag Taurus U – U-frame design
SLAG TAURUS
8 SLAG TAURUS PLATFORM DESIGN
Typical requirements:
– Narrow roads /conditions
– Different pick up situations
e.g. transfer car, ground level, etc.
Vehicle specifications:
– Independent pick up and set down of
slag pots
– Dumping angle up to 180°
– Upside down positioning of slag pots
– Cabin protected by a large canopy
– Cabin located on trailer for better visibilty,
drivers comfort and safety
– KISS (KIROW Integrated Safety System)
– Patented outrigger safety system
– Fully protected rear axles and tires
– Hitch and steering in sturdy CAT design
with a steering angle up to 90°
– Low life-time costs
– Low maintenance costs
The Slag Taurus P is available with many
additional optional features.
6 The KIROW Slag Taurus P – platform design
SLAG TAURUS
8 Payload From 88,000 lb up to 154,000 lb
8 Length From 33 ft up to 35 ft
8 Width From 14 ft up to 16 ft
8 Height From 17 ft up to 20 ft
8 Power Up to 300 HP
8 Pot size From 200 ft³ up to 650 ft³
8 Axle lines 2
8 Dumping angle Up to 130°
SLAG TAURUS U 40 - U 70
SLAG TAURUS U 80 - U 160
SLAG TAURUS P 40 - P 70
THE SLAG TAURUS
SLAG TAURUS P 80 - P 140
8 Payload From 176,000 lb up to 353,000 lb
8 Length From 41 ft up to 44 ft
8 Width From 20 ft up to 31 ft
8 Height From 14 ft up to 18 ft
8 Power Up to 465 HP
8 Pot size From 500 ft³ up to 1,250 ft³
8 Axle lines 2
8 Dumping angle Up to 130°
8 Payload From 88,000 lb up to 154,000 lb
8 Length From 33 ft up to 37 ft
8 Width From 13 ft up to 17 ft
8 Height From 13 ft up to 15 ft
8 Power Up to 300 HP
8 Pot size From 200 ft³ up to 600 ft³
8 Axle lines 2 or 3
8 Dumping angle Up to 180°
8 Payload From 176,000 lb up to 309,000 lb
8 Length From 40 ft up to 48 ft
8 Width From 16 ft up to 22 ft
8 Height From 16 ft up to 17 ft
8 Power Up to 465 HP
8 Pot size From 550 ft³ up to 1,100 ft³
8 Axle lines 3
8 Dumping angle Up to 180°
SLAG TAURUS
6 KISS (Kirow Integrated Safety System) - Safety system with monitoring of all carrier functions on display inside cabin
ExTENSIVE PROTECTION COVERS - KISS - ARTICULATED STEERING
6 Articulated steering in sturdy CAT design with up to 90° steering angle
6 Extensive protection covers at trailer - The covers are protecting sensitive parts at the trailer from hot slag splashes, for example the cylinders or hoses.
SLAG TAURUS
KIROW ARDELT GmbH
RAIFFEISENSTRASSE 26
89079 ULm
PHONE +49 731 94652 10
FAx +49 731 94652 11
E-mAIL [email protected]
WWW KIROW.DE
KRANUNION CRANES & TRANSPORT
SYSTEmS INC.
1957 SENNEbOGEN TRAIL
STANLEY, NC 28164
USA
PHONE +1 704 675 1998
E-mAIL [email protected]
WWW KRANUNION.DE
KIROW IS A mEmbER OF KRANUNION.
8 SLAG TAURUS P
Articulated slag pot carrier
in platform design for slag
handling in steel mills.
8 mULTI FLExUS
Articulated pallet
transporter for steel mills.
8 mULTI mOVER
Wheel steered transporter
for steel mills.
Kranunion is a group of three leading crane manufacturers
specialized in the design and production of cranes and
transporters for ports, shipyards, steel mills and railways.
Kranunion companies are driven by the great German
engineering tradition. All of our products are centered
around ingenious technical concepts that are perfectly
suited for the task at hand.
KIROW
is the world market leader for railway cranes and
slag pot carriers.
ARDELT
is the world market leader for double jib level luffing cranes.
KOCKS
is the world market leader for Goliath cranes and a pioneer in
the development of container cranes.
8 SLAG TAURUS U
Articulated slag pot carrier
in U-frame design for slag
handling in steel mills.
Available in several versions for different transport tasks.
Vehicles for pallet, skip, ladle or slab handling.
Available in several versions for different transport tasks.
Vehicles for pallet, ladle or slab handling.
8 mULTI mOVER Y
Wheel steered ladle crane
for hot metal handling in
steel mills.
8 mULTI mOVER m
Wheel steered ladle
transporter for hot metal
handling in steel mills.
