19-132

Pendant Stations Application and Ordering Information

schneider-electric.us

Refer to Catalog 9001CT1001

Pendant Station Application and Ordering Information

LIFETIMEENCLOSUREWARRANTY

This line of pendant stations consists of polymeric enclosures (2 through 10 units), pushbutton units (1 through 5 speed) and laminated legend plates. All enclosures have anextra single unit space near the top which permits the installation of a toggle switch, aType SK operator or pilot light, or a warning label. All enclosures come with a stainlesssteel hanger bracket and internal strain relief post. Enclosures are yellow and have athreaded opening in the top.

Table 19.405: Enclosure Catalog Numbers

Number of Buttons Conduit Entrance SizeEnclosure Only

[17]Enclosure for Assembled

Station[18]

Catalog Number Catalog Number2468

10

3/4"-14 NPT3/4"-14 NPT1"-111/2 NPT11/4"-111/2 NPT11/4"-111/2 NPT

SKYP2SKYP4SKYP6SKYP8SKYP10

SKYP20SKYP40SKYP60SKYP80SKYP100

Hanger bracket (Part no. 65091-061-01) Threaded conduit hole

Space for toggle switch, a type SK operator or pilot light. Use appropriate legend plates.

Type SKYP enclosure

Type SKRU1 through SKRU11 operators. Any Type SK pilot light or operator can be mounted in this enclosure. The enclosure depth will accommodate 1 Type KA1 thru KA6 (total of 2) contact blocks.

Type SKN2 legend plate

Class 9001 SK push-to-test pilot lights and remote test pilot lights will not fit in these enclosures.

Table 19.406: Push Button UnitsNumber of Buttonsper Unit Description Contact

SymbolCatalog Number

[19]

2 Single Speed –Momentary Interlocked 7 SKRU1[20]

2Single Speed –Momentary Non-Interlocked

5 SKRU10[20]

2 Single Speed –Maintained Interlock 10 SKRU11[20]

2 Two Speed –MomentaryInterlocked 87 SKRU2[21]

2 Three Speed –Momentary Interlocked 88 SKRU3[21]

2 Four Speed –Momentary Interlocked 89 SKRU4[21]

2 Five Speed –MomentaryInterlocked 90 SKRU5[21]

Terminals

872868-D30

C

1

2

2 1

SPEED POSITIONOFF

1 2

C

1

2

TerminalsC

1

2

3

3 2 1

SPEED POSITIONOFF

2868-D29

88

1 2 3 Terminals

C

1

2

3

Terminals

TerminalsC

1

2

3

4

4 3 2 1SPEED POSITION

OFF

2868-D31

89

1 2 3 4Terminals

C

1

2

3

4

TerminalsC

1

2

3

4

4 3 2 1

SPEED POSITIONOFF

2868-D32

90

1 2 3 4 TerminalsC

1

2

3

4

5 5

55

Figure 19.1: Multispeed Contact Symbols (X = Contact Closed)

Table 19.407: Legend Plate Catalog NumbersWhereUsed Marketing Catalog Number

ForSKRU1throughSKRU11

Blank-BlankHoist: Up-DownTrolley: East-WestTrolley: Fwd.-Rev.Trolley: North-SouthBridge: Fwd.-Rev.Bridge: East-WestBridge: North-SouthStart-StopReset-StopAux Hoist: Up-DownPower: On-Off

SKN200[22]SKN201SKN202SKN203SKN204SKN205SKN206SKN207SKN208SKN209SKN210SKN211

Specify Marking SKN299[22]Withtoggleswitch[23]in topspace ofenclosure

BlankOff-OnOn-Off

SKN500 [24]SKN544 [24]SKN545 [24]

Specify Marking SKN599 [24]

With9001SK[25]operatoror pilotlight in topspace ofenclosure

BlankOnOffEmerg. StopRunPower OnOff-On

SKN100 [26]SKN103SKN104SKN105SKN124SKN138SKN144

Specify Marking SKN199 [26]

1057

Figure 19.2: Single Speed Contact Symbols

Table 19.408: Closing Plate Catalog NumberCatalog Number

SK52

[17] Class 9001 SK push-to-test pilot lights and remote test pilot lights will not fit in these enclosures.[18] Assembled pendant stations consist of an enclosure, operators and legend plates. All custom orders must include the pendant key sheet. See Type XACA Worksheet, page 19-131.[19] Types SKRU 1, 10 and 11 use Type KA contact blocks. Types SKRU 2 thru 5 are factory enclosed contact blocks.[20] Boot part number is 9001KU1.[21] Boot part number is 9001KU37.[22] 19 characters each side max.[23] Can be supplied by Square D as Class 9001 Type SKSTS1- includes boot for NEMA Type 4X.[24] Includes legend plate, gasket and ground plate to be used with toggle switch.[25] See 9001SK, page 19-82through page 19-89[26] Tri-laminated legend plate having a yellow or red background on a black core.

19PUSHBUTTONSANDOPERATOR

INTERFA

CE

© 2016 Schneider Electric All Rights Reserved

3/24/2016

19-133

schneider-electric.us

Application and Ordering Information Pendant StationsRefer to Catalog 9001CT1001

Type SKYP Worksheet

1. Opera tor or Clos ing Pla te .Example - SKRU1

2. Legend Pla te Type NumberExample - SKN201

3. Legend Pla te Marking– Used Only if Specia l Marking is RequiredExample :

Line 2 - SKN299Line 3 - A.) Hois t

B.) FWDC.) REV

ENCLOSURES – NEMA 4X, 13

PUSH BUTTON UNITS – NEMA / UL 4X, 13

CLOSING PLATE

Control Products

Use this worksheet to assist in component selection. SKYP Custom Pendant orders must be placed through the Product Selector in Quote to Cash. There is a 10% charge for assembly.

Class 9001 epyT SKYP -________

SizeConduitEntrance

Size

Enclos urefor As s embled

Station

Catalog Number

2 Button 3/4" -14 NPT SKYP20

4 Button 3/4" -14 NPT SKYP40

06PYKSTPN41-"1nottuB6

1nottuB8 1/4" -11 1/2 SKYP80

1nottuB01 1/4" -11 1/2 SKYP100

Assembled pendant s ta tions cons is t of an enclosure, opera tors, andlegend pla tes .

Numb er o fButtons per

UnitDes crip tion Contact

Symbol TypeWhere Used Marking Catalog Number

2 Single Speed - Momenta ryInte rlocked 7 SKRU1

2 Single Speed - Momenta ryNon-Interlocked 5 SKRU10

2 Single Speed - Mainta inedInte rlocked 10 SKRU11

2 Two Speed - Momenta ryInte rlocked 87 SKRU2

2 Three Speed - MomentaryInte rlocked 88 SKRU3

2 Four Speed - Momenta ryInte rlocked 89 SKRU4

2 Five Speed - MomentaryInte rlocked 90 SKRU5

Type

SK52

When opera tor and legend pla teuse 2 adjacent holes - specifysame in both loca tions. Example :

1

2

3

1

2

3 A)

B)

C)

1

2

3 A)

B)

C)

1

2

3 A)

B)

C)

1

2

3 A)

B)

C)

1

2

3 A)

B)

C)

1

2

3 A)

B)

C)

1

2

3 A)

B)

C)

1

2

3 A)

B)

C)

1

2

3 A)

B)

C)

1

2

3 A)

B)

C)

Space for tog-gle switch , aType SK opera -tor or pilot light,or a warning la -bel. Use SKN-5or SKN-1 leg-end pla tes .

Type SKRU1throughSKRU11opera tors orType SKopera tors andType SKN-2legend pla te.

TYPE NUMBER KEY

A

1

C

B 23

SKRU1SKN201

123

SKRU1SKN201

Hanger bracke tThreaded conduitholeSpace for toggleswitch , a Type SKopera tor or pilot lightor a warning labe l.Use SKN5 or SKN1legend pla tes.Type SKYP enclosure

Type SKRU1 throughSKRU11 opera tors .Type SKN2 legendpla te

LEGEND PLATES – NEMA / UL 4X, 13

Available as 9001SKSTS1Includes legend pla te, gaske t and ground pla te to beused with toggle switch.Tri-laminated legend pla te having a ye llow or redbackground on a black core.19 characte rs each side .Class 9001 Type SK Push-To-Tes t P ilot lights and Re-mote Tes t Pilot lights will not fit in these enclosures .

For SKRU1throughSKRU11

Blank-BlankHois t: Up-DownTrolley: East-WestTrolley: Fwd.-Rev.Trolley: North-SouthBridge: Fwd.-Rev.Bridge: Eas t-Wes tBridge: North-SouthSta rt-S topRese t-S topSpecify Marking

SKN200SKN201SKN202SKN203SKN204SKN205SKN206SKN207SKN208SKN209SKN299

With ToggleSwitch inTop Space ofEnclos ure

BlankOff-OnOn-OffSpecify Marking

SKN500SKN544SKN545SKN599

With Type SKOpera toror P ilot Lightin Top Spaceof Enclosure

BlankOnOffEmerg. S topRunPower OnOff-OnSpecify MarkingSpecify Marking(Red Background)

SKN100SKN103SKN104SKN105SKN124SKN138SKN144SKN199SKN199R

The price of the tota l s ta tioncons is ts of the price of eachindividua l component plus a10% charge for assembly.

19PUSHBUTTONSANDOPERATOR

INTERFA

CE

© 2016 Schneider Electric All Rights Reserved 3/24/2016