Upload
skillbond-direct-ltd
View
243
Download
0
Embed Size (px)
DESCRIPTION
Spring 2015 issue of our specialist dental laboratory offers brochure. This edition contains an article on Amann Girrbach Giroform - with CPD questions available on www.skillbond.com/cpd. Great deals and offers on products from Amann Girrbach, Dedeco, Dentalfarm, Detax, Hatho, Merz Dental, NSK, 3Shape & Vita for all dental laboratories.
Citation preview
LabEssentials
Open Monday to Friday 8.30am - 5.00pm. [Order online 24 hours]
01494 448474 | [email protected] | www.skillbond.com
Offers • Products • Innovation
Skillbond Laboratory Essentials No 8 Spring2015
VITA MFT®EASY-CENTRIC®PAGE 14
DEDECOULTRA DIA-STONE
FREE CPD!GIROFORM ARTICLEPAGES 8 & 9
SEE PAGE 5
DLA2014TRADE
AWARDSTrade Company Of
The Year
Winner
Trade Company Of The Year 2014
Winner
Call us today 01494 4484742|
Lab Essentials 8 Spring 2015
DENTALFARM HP35 ON-OFFBench top brush micromotor
DENTALFARM HP45 MULTIFUNCTIONBench top brush micromotor
Bench-top micromotor featuring a compact, heavy-duty control unit and ergonomic 35.000rpm handpiece.
Bench-top micromotor featuring a compact, heavy-duty control unit and ergonomic 45.000rpm handpiece.
NSK ULTIMATE XL TORQUE MICROMOTOR
With 180° Vector Control System, the new Ultimate XL delivers smoother rotation and powerful torque throughout the entire speed range.
SWR700Ultimate XL Torque Bench Top Control £850.00
SCI656 Dentalfarm HP35 On-Off £318.00
SWR701Ultimate XL Torque Knee Control £850.00SWR702
Ultimate XL Torque Foot Control £850.00
SCI657 Dentalfarm HP45 Multifunction £446.00
- Speed: 1,000 – 50,000min -1- Max. Torque of 8.7 Ncm- Dimensions : L151 x Ø29 (mm)- Weight : 219 g (Cord not included)- Cord Length : 1.2 m
Field-test proven, easy-to-hold handpiece design helps you work more efficiently even on the most elaborate applications that require concentration for longer hours.
|3 01494 448474 | [email protected] | www.skillbond.com
ALL LAB ESSENTIALS 8 PRICES EXCLUDE VAT & CARRIAGE, VALID UNTIL 15/05/2015. SUBJECT TO AVAILABILITY - E & OE. IMAGES ARE NOT TO SCALE
NSK PRESTO AQUA IIAir TurbineHigh-speed laboratory handpiece with a built-in water supply to spray directly to a bur and a work spot. Sprayed water eliminates heat generated on the target substrate even in a prolonged application.
SWR070 Presto Aqua II £995.00
�5
DiAmANTDiAmoND • DiAmANT
p 5 L mm 6,0 6,0 �,0 �,0Shank Order No.
FG 834.314... 0�6 0��868A.314... 0�8 0��
Schnittiefe • Cutting depth • Cutting depth – Tmm0,� 0,5 0,� 0,�
834868A
p 5 L mm �,0 �,0 �,0 �,0 �,0 �,0 �,0 �,0Shank Order No. 834 834 834A 868A 868A
FG 835.314... 007 008 009 0�0 0�� 0�� 0�6 0�8• C 835.314... 0��• F 835.314... 0�0 0�� 0��• G 835.314... 009 0�0 0�� 0�� 0�6 0�8
• SG 835.314... 0�0 0�� 0�� 0�6RA 835.204... 0�0 0�� 0�� 0�6
835
p 5 L mm �0,0 �0,0 �0,0 �0,0Shank Order No.
FG 837L.314... 0�0 0�� 0�� 0�6• F 837L.314... 0��• G 837L.314... 0�0 0�� 0�� 0�6
• SG 837L.314... 0�� 0�6
837L
p 5 L mm �,0 �,0 �,0 �,0 �,0Shank Order No.
FG 838.314... 008 009 0�0 0�� 0��• F 838.314... 0�0• G 838.314... 0�0 0�� 0��
• SG 838.314... 0��
838
p 5 L mm 0,� 0,� 0,�Shank Order No.
FG 839.314... 0�� 0�� 0�6• F 839.314... 0�� 0��
839
p 5 L mm 6,0 6,0 6,0 6,0 6,0 6,0Shank Order No.
FG 836.314... 008 0�0 0�� 0�� 0�6 0�8• F 836.314... 0�0 0��• G 836.314... 0�0 0�� 0�� 0�6 0�8
• SG 836.314... 0�� 0�� 0�6
836
p 5 L mm �,0 �,0 �,0 �,0 �,0Shank Order No.
FG 835KR.314... 008 0�0 0�� 0��• F 835KR.314... 008 0�0 0��• G 835KR.314... 0�0 0�� 0�� 0�6
• SG 835KR.314... 0�� 0�6
835KR
p 5 L mm 8,0 8,0 8,0 8,0 8,0Shank Order No.
FG 837.314... 0�0 0�� 0�� 0�6 0�8• F 837.314... 0�� 0��• G 837.314... 0�0 0�� 0�� 0�6 0�8
• SG 837.314... 0�� 0�� 0�6 0�8
837
p 5 L mm 6,0 6,0 6,0 6,0 6,0Shank Order No.
FG 836KR.314... 008 0�0 0�� 0�� 0�6• F 836KR.314... 008 0�0 0��• G 836KR.314... 0�0 0�� 0�� 0�6
• SG 836KR.314... 0�� 0�6
836KR
p 5 L mm 8,0 8,0 8,0 8,0Shank Order No.
FG 837KR.314... 0�0 0�� 0�� 0�6• F 837KR.314... 0�0 0�� 0�� 0�6• G 837KR.314... 0�0 0�� 0�� 0�6
• SG 837KR.314... 0�� 0�� 0�6
837KR
p 5 L mm 0,� 0,� 0,�Shank Order No.
FG 840.314... 0�� 0�� 0�6
840
p 5 L mm ��,0 ��,0 ��,0Shank Order No.
FG 842.314... 0�� 0�� 0�8• G 842.314... 0�� 0�� 0�8
• SG 842.314... 0�� 0��
842
p 5 L mm �,0 �,0 �,0 �,0 �,0Shank Order No.
FG 845.314... 009 0�0 0�� 0�� 0�6• G 845.314... 0�� 0�� 0�6
845
p 5 L mm �,0 �,0Shank Order No.
FG 845KR.314... 0�8 0�5• C 845KR.314... 0�5• F 845KR.314... 0�8 0�5• G 845KR.314... 0�8 0�5
845KR
p 5 L mm 6,0 6,0 7,0Shank Order No.
FG 846.314... 0�� 0�6 0�5• F 846.314... 0�5• G 846.314... 0�� 0�6 0�5
846
p 5 L mm 8,0 8,0 8,0 8,0 8,0 8,0Shank Order No.
FG 847.314... 0�0 0�� 0�� 0�6 0�8 0��• C 847.314... 0�0• F 847.314... 0�0 0�� 0�� 0�6 0��• G 847.314... 0�0 0�� 0�� 0�6 0�8 0��
• SG 847.314... 0�� 0�6 0�8
847
SET726836.314.014
�6
DiAmANTDiAmoND • DiAmANT
p 5 L mm 8,0 8,0Shank Order No.
FG 847KR.314... 0�6 0��• F 847KR.314... 0�6 0��• G 847KR.314... 0�6 0��
847KR
p 5 L mm �0,0 �0,0 �0,0 �0,0 �0,0 �0,0Shank Order No.
FG 848.314... 0�0 0�� 0�� 0�6 0�8 0��• C 848.314... 0�0 0�� 0�� 0�6• F 848.314... 0�0 0�� 0�� 0�6 0�8• G 848.314... 0�0 0�� 0�� 0�6 0�8 0��
• SG 848.314... 0�6 0�8 0��
848
p 5 L mm ��,5 ��,5 ��,5 ��,5Shank Order No.
FG 848L.314... 0�� 0�� 0�6 0�8• G 848L.314... 0�� 0�6 0�8
• SG 848L.314... 0�� 0�6 0�8
848L
p 5 L mm �,0 �,0 �,0 �,0 �,0 �,0Shank Order No.
FG 849.314... 009 0�0 0�� 0�� 0�6• F 849.314... 0��• G 849.314... 009 0�0 0�� 0�� 0�6 0�5
RA 849.204... 0�6
849
p 5 L mm �0,0 �0,0 �0,0 �0,0 �0,0 �0,0Shank Order No.
FG 850.314... 0�0 0�� 0�� 0�6 0�8 0��• C 850.314... 0�0 0�� 0�� 0�6 0�8• F 850.314... 0�0 0�� 0�� 0�6 0�8 0��• G 850.314... 0�0 0�� 0�� 0�6 0�8 0��
• SG 850.314... 0�� 0�6 0�8 0��
850
p 5 L mm ��,5 ��,5 ��,5 ��,5Shank Order No.
FG 850L.314... 0�� 0�� 0�6 0�8• C 850L.314... 0��• F 850L.314... 0�� 0��• G 850L.314... 0�� 0�� 0�6 0�8
• SG 850L.314... 0�� 0�6 0�8
850L
p 5 L mm 8,0 8,0 8,0Shank Order No.
FG 851.314... 0�0 0�� 0�6• F 851.314... 0�0 0��• G 851.314... 0�� 0�6
851
p 5 L mm �,0 6,0Shank Order No.
FG 852.314... 0�0 0��UF 852.314... 0��
• C 852.314... 0�0 0��• F 852.314... 0�0 0��• G 852.314... 0��
852
p 5 L mm 6,0 6,0 7,0Shank Order No.
FG 855.314... 0�� 0�� 0�5• F 855.314... 0��• G 855.314... 0�� 0�� 0�5
• SG 855.314... 0�� 0�� 0�5
855
p 5 L mm 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0Shank Order No.
FG 856.314... 009 0�0 0�� 0�� 0�6 0�8 0�� 0�5• C 856.314... 0�0 0�� 0�6• F 856.314... 009 0�0 0�� 0�� 0�6 0�8 0�� 0�5• G 856.314... 0�� 0�� 0�6 0�8 0�� 0�5
• SG 856.314... 0�� 0�6 0�8 0�� 0�5
856
p 5 L mm 9,0 9,0 9,0 9,0Shank Order No.
FG 856L.314... 0�� 0�6 0�8 0�0• F 856L.314... 0�� 0�6 0�8 0�0• G 856L.314... 0�� 0�6 0�8 0�0
• SG 856L.314... 0�� 0�6 0�8 0�0
856L
p 5 L mm �0,0 �0,0 �0,0Shank Order No.
FG 857.314... 0�� 0�� 0�6• F 857.314... 0�� 0��• G 857.314... 0�� 0�� 0�6
• SG 857.314... 0�� 0�6
857
p 5 L mm 8,0 8,0 8,0 8,0 8,0Shank Order No.
FG 858.314... 0�0 0�� 0�� 0�6 0�8UF 858.314... 0��
• C 858.314... 0�0 0�� 0�� 0�6• F 858.314... 0�0 0�� 0�� 0�6 0�8• G 858.314... 0�0 0�� 0�� 0�6 0�8
• SG 858.314... 0�� 0�6 0�8
858
p 5 L mm �0,0 �0,0 �0,0 �0,0 �0,0 �0,0Shank Order No.
FG 859.314... 0�0 0�� 0�� 0�6 0�8 0��UF 859.314... 0�0 0�6 0�8
• C 859.314... 0�0 0�� 0�� 0�6 0�8• F 859.314... 0�0 0�� 0�� 0�6 0�8• G 859.314... 0�0 0�� 0�� 0�6 0�8 0��
• SG 859.314... 0�8RA 859.204... 0�� 0�6
859
p 5 L mm ��,5 ��,5 ��,5 ��,5Shank Order No.
FG 859L.314... 0�0 0�� 0�6 0�8UF 859L.314... 0�0
• C 859L.314... 0�0 0�� 0�6• F 859L.314... 0�0 0�� 0�6• G 859L.314... 0�� 0�6 0�8
• SG 859L.314... 0�6 0�8
859L
p 5 L mm �,0 5,0 5,0Shank Order No.
FG 860.314... 0�0 0�� 0��• C 860.314... 0�0 0�� 0��• F 860.314... 0�0 0�� 0��• G 860.314... 0�0 0�� 0��
• SG 860.314... 0��RA 860.204... 0��
860
p 5 L mm 6,0 6,0Shank Order No.
FG 861.314... 0�� 0��• C 861.314... 0�� 0��• F 861.314... 0��• G 861.314... 0�� 0��
861
p 5 L mm 8,0 8,0 8,0 8,0 8,0Shank Order No. 834 834 834A 868A 868A
FG 862.314... 009 0�0 0�� 0�� 0�6UF 862.314... 0�0
• C 862.314... 009 0�0 0�� 0�� 0�6• F 862.314... 009 0�0 0�� 0�� 0�6• G 862.314... 0�0 0�� 0�� 0�6
• SG 862.314... 0�� 0�� 0�6RA 862.204... 0�� 0�6
862
SET727850.314.018
�6
DiAmANTDiAmoND • DiAmANT
p 5 L mm 8,0 8,0Shank Order No.
FG 847KR.314... 0�6 0��• F 847KR.314... 0�6 0��• G 847KR.314... 0�6 0��
847KR
p 5 L mm �0,0 �0,0 �0,0 �0,0 �0,0 �0,0Shank Order No.
FG 848.314... 0�0 0�� 0�� 0�6 0�8 0��• C 848.314... 0�0 0�� 0�� 0�6• F 848.314... 0�0 0�� 0�� 0�6 0�8• G 848.314... 0�0 0�� 0�� 0�6 0�8 0��
• SG 848.314... 0�6 0�8 0��
848
p 5 L mm ��,5 ��,5 ��,5 ��,5Shank Order No.
FG 848L.314... 0�� 0�� 0�6 0�8• G 848L.314... 0�� 0�6 0�8
• SG 848L.314... 0�� 0�6 0�8
848L
p 5 L mm �,0 �,0 �,0 �,0 �,0 �,0Shank Order No.
FG 849.314... 009 0�0 0�� 0�� 0�6• F 849.314... 0��• G 849.314... 009 0�0 0�� 0�� 0�6 0�5
RA 849.204... 0�6
849
p 5 L mm �0,0 �0,0 �0,0 �0,0 �0,0 �0,0Shank Order No.
FG 850.314... 0�0 0�� 0�� 0�6 0�8 0��• C 850.314... 0�0 0�� 0�� 0�6 0�8• F 850.314... 0�0 0�� 0�� 0�6 0�8 0��• G 850.314... 0�0 0�� 0�� 0�6 0�8 0��
• SG 850.314... 0�� 0�6 0�8 0��
850
p 5 L mm ��,5 ��,5 ��,5 ��,5Shank Order No.
FG 850L.314... 0�� 0�� 0�6 0�8• C 850L.314... 0��• F 850L.314... 0�� 0��• G 850L.314... 0�� 0�� 0�6 0�8
• SG 850L.314... 0�� 0�6 0�8
850L
p 5 L mm 8,0 8,0 8,0Shank Order No.
FG 851.314... 0�0 0�� 0�6• F 851.314... 0�0 0��• G 851.314... 0�� 0�6
851
p 5 L mm �,0 6,0Shank Order No.
FG 852.314... 0�0 0��UF 852.314... 0��
• C 852.314... 0�0 0��• F 852.314... 0�0 0��• G 852.314... 0��
852
p 5 L mm 6,0 6,0 7,0Shank Order No.
FG 855.314... 0�� 0�� 0�5• F 855.314... 0��• G 855.314... 0�� 0�� 0�5
• SG 855.314... 0�� 0�� 0�5
855
p 5 L mm 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0Shank Order No.
FG 856.314... 009 0�0 0�� 0�� 0�6 0�8 0�� 0�5• C 856.314... 0�0 0�� 0�6• F 856.314... 009 0�0 0�� 0�� 0�6 0�8 0�� 0�5• G 856.314... 0�� 0�� 0�6 0�8 0�� 0�5
• SG 856.314... 0�� 0�6 0�8 0�� 0�5
856
p 5 L mm 9,0 9,0 9,0 9,0Shank Order No.
FG 856L.314... 0�� 0�6 0�8 0�0• F 856L.314... 0�� 0�6 0�8 0�0• G 856L.314... 0�� 0�6 0�8 0�0
• SG 856L.314... 0�� 0�6 0�8 0�0
856L
p 5 L mm �0,0 �0,0 �0,0Shank Order No.
FG 857.314... 0�� 0�� 0�6• F 857.314... 0�� 0��• G 857.314... 0�� 0�� 0�6
• SG 857.314... 0�� 0�6
857
p 5 L mm 8,0 8,0 8,0 8,0 8,0Shank Order No.
FG 858.314... 0�0 0�� 0�� 0�6 0�8UF 858.314... 0��
• C 858.314... 0�0 0�� 0�� 0�6• F 858.314... 0�0 0�� 0�� 0�6 0�8• G 858.314... 0�0 0�� 0�� 0�6 0�8
• SG 858.314... 0�� 0�6 0�8
858
p 5 L mm �0,0 �0,0 �0,0 �0,0 �0,0 �0,0Shank Order No.
FG 859.314... 0�0 0�� 0�� 0�6 0�8 0��UF 859.314... 0�0 0�6 0�8
• C 859.314... 0�0 0�� 0�� 0�6 0�8• F 859.314... 0�0 0�� 0�� 0�6 0�8• G 859.314... 0�0 0�� 0�� 0�6 0�8 0��
• SG 859.314... 0�8RA 859.204... 0�� 0�6
859
p 5 L mm ��,5 ��,5 ��,5 ��,5Shank Order No.
FG 859L.314... 0�0 0�� 0�6 0�8UF 859L.314... 0�0
• C 859L.314... 0�0 0�� 0�6• F 859L.314... 0�0 0�� 0�6• G 859L.314... 0�� 0�6 0�8
• SG 859L.314... 0�6 0�8
859L
p 5 L mm �,0 5,0 5,0Shank Order No.
FG 860.314... 0�0 0�� 0��• C 860.314... 0�0 0�� 0��• F 860.314... 0�0 0�� 0��• G 860.314... 0�0 0�� 0��
• SG 860.314... 0��RA 860.204... 0��
860
p 5 L mm 6,0 6,0Shank Order No.
FG 861.314... 0�� 0��• C 861.314... 0�� 0��• F 861.314... 0��• G 861.314... 0�� 0��
861
p 5 L mm 8,0 8,0 8,0 8,0 8,0Shank Order No. 834 834 834A 868A 868A
FG 862.314... 009 0�0 0�� 0�� 0�6UF 862.314... 0�0
• C 862.314... 009 0�0 0�� 0�� 0�6• F 862.314... 009 0�0 0�� 0�� 0�6• G 862.314... 0�0 0�� 0�� 0�6
• SG 862.314... 0�� 0�� 0�6RA 862.204... 0�� 0�6
862
SET728859.L.314.010
�7
DiAmANTDiAmoND • DiAmANT
p 5 L mm �0,0 �0,0 �0,0 �0,0 �0,0Shank Order No. 834 834 834A 868A 868A
FG 863.314... 0�0 0�� 0�� 0�6 0�8UF 863.314... 0�0 0��
• C 863.314... 0�0 0�� 0�� 0�6• F 863.314... 0�0 0�� 0�� 0�6 0�8• G 863.314... 0�� 0�� 0�6 0�8
• SG 863.314... 0�� 0�6 0�8RA 863.204... 0�� 0�6 0�8
• C 863.204... 0��
863
p 5 L mm ��,0 ��,0 ��,0 ��,0Shank Order No.
FG 864.314... 0�� 0�� 0�6 0�8• C 864.314... 0�6• F 864.314... 0�� 0�� 0�6• G 864.314... 0�� 0�6 0�8
• SG 864.314... 0�6 0�8
864
p 5 L mm 6,0 6,0 6,0Shank Order No.
FG 877.314... 009 0�0 0��• F 877.314... 0�0 0��• G 877.314... 0��
877
p 5 L mm 8,0 8,0 8,0 8,0 8,0 8,0Shank Order No.
FG 878.314... 008 009 0�0 0�� 0�� 0�6• C 878.314... 0�0 0�� 0��• F 878.314... 008 009 0�0 0�� 0�� 0�6• G 878.314... 0�0 0�� 0�� 0�6
• SG 878.314... 0�� 0�� 0�6
878
p 5 L mm �0,0 �0,0 �0,0 �0,0 �0,0Shank Order No.
FG 879.314... 0�0 0�� 0�� 0�6 0�8• C 879.314... 0�� 0�� 0�6• F 879.314... 0�0 0�� 0�� 0�6 0�8• G 879.314... 0�0 0�� 0�� 0�6 0�8
• SG 879.314... 0�� 0�� 0�6 0�8
879
p 5 L mm ��,0 ��,0Shank Order No.
FG 879L.314... 0�� 0��• F 879L.314... 0�� 0��• G 879L.314... 0�� 0��
• SG 879L.314... 0�� 0��
879L
p 5 L mm 8,0 8,0 8,0 8,0 8,0Shank Order No.
FG 878K.314... 0�� 0�� 0�6 0�8 0��• C 878K.314... 0��• F 878K.314... 0�� 0�� 0�6 0�8 0��• G 878K.314... 0�� 0�� 0�6 0�8 0��
• SG 878K.314... 0�� 0�� 0�6 0�8 0��
878K
p 5 L mm �0,0 �0,0 �0,0 �0,0 �0,0 �0,0Shank Order No.
FG 879K.314... 0�� 0�� 0�6 0�8 0�� 0��• C 879K.314... 0��• F 879K.314... 0�� 0�� 0�6 0�8• G 879K.314... 0�� 0�� 0�6 0�8 0�� 0��
• SG 879K.314... 0�� 0�� 0�6 0�8 0��
879K
p 5 L mm 6,0 6,0 6,0Shank Order No.
FG 880.314... 0�0 0�� 0��• C 880.314... 0��• F 880.314... 0�� 0��• G 880.314... 0�� 0��
• SG 880.314... 0��
880
p 5 L mm 8,0 8,0 8,0 8,0 8,0Shank Order No.
FG 881.314... 0�0 0�� 0�� 0�6 0�8• C 881.314... 0�� 0��• F 881.314... 0�0 0�� 0�� 0�6 0�8• G 881.314... 0�0 0�� 0�� 0�6 0�8
• SG 881.314... 0�� 0�6 0�8
881
p 5 L mm 7,0 8,0 8,0 8,0Shank Order No.
FG • SG 881KS.314... 0�� 0�� 0�5 0�6
881KS
p 5 L mm �0,0 �0,0Shank Order No.
FG 882.314... 0�� 0��• C 882.314... 0��• F 882.314... 0�� 0��• G 882.314... 0�� 0��
• SG 882.314... 0��
882
p 5 L mm 8,0 8,0 8,0 8,0 8,0Shank Order No. 834 834 834A 868A 868A
FG 885.314... 008 0�0 0�� 0�� 0�6• F 885.314... 0�0 0�� 0��• G 885.314... 0�� 0�� 0�6
• SG 885.314... 0�� 0��
885
p 5 L mm �0,0 �0,0 �0,0 �0,0Shank Order No. 834 834 834A 868A
FG 886.314... 0�0 0�� 0�� 0�6• C 886.314... 0��• F 886.314... 0�0 0�� 0�� 0�6• G 886.314... 0�� 0�� 0�6
• SG 886.314... 0�� 0�� 0�6
886
p 5 L mm 8,0Shank Order No.
FG 888.314... 0��• C 888.314... 0��• F 888.314... 0��• G 888.314... 0��
888
SET729F863.314.012
�6
DiAmANTDiAmoND • DiAmANT
p 5 L mm 8,0 8,0Shank Order No.
FG 847KR.314... 0�6 0��• F 847KR.314... 0�6 0��• G 847KR.314... 0�6 0��
847KR
p 5 L mm �0,0 �0,0 �0,0 �0,0 �0,0 �0,0Shank Order No.
FG 848.314... 0�0 0�� 0�� 0�6 0�8 0��• C 848.314... 0�0 0�� 0�� 0�6• F 848.314... 0�0 0�� 0�� 0�6 0�8• G 848.314... 0�0 0�� 0�� 0�6 0�8 0��
• SG 848.314... 0�6 0�8 0��
848
p 5 L mm ��,5 ��,5 ��,5 ��,5Shank Order No.
FG 848L.314... 0�� 0�� 0�6 0�8• G 848L.314... 0�� 0�6 0�8
• SG 848L.314... 0�� 0�6 0�8
848L
p 5 L mm �,0 �,0 �,0 �,0 �,0 �,0Shank Order No.
FG 849.314... 009 0�0 0�� 0�� 0�6• F 849.314... 0��• G 849.314... 009 0�0 0�� 0�� 0�6 0�5
RA 849.204... 0�6
849
p 5 L mm �0,0 �0,0 �0,0 �0,0 �0,0 �0,0Shank Order No.
FG 850.314... 0�0 0�� 0�� 0�6 0�8 0��• C 850.314... 0�0 0�� 0�� 0�6 0�8• F 850.314... 0�0 0�� 0�� 0�6 0�8 0��• G 850.314... 0�0 0�� 0�� 0�6 0�8 0��
• SG 850.314... 0�� 0�6 0�8 0��
850
p 5 L mm ��,5 ��,5 ��,5 ��,5Shank Order No.
FG 850L.314... 0�� 0�� 0�6 0�8• C 850L.314... 0��• F 850L.314... 0�� 0��• G 850L.314... 0�� 0�� 0�6 0�8
• SG 850L.314... 0�� 0�6 0�8
850L
p 5 L mm 8,0 8,0 8,0Shank Order No.
FG 851.314... 0�0 0�� 0�6• F 851.314... 0�0 0��• G 851.314... 0�� 0�6
851
p 5 L mm �,0 6,0Shank Order No.
FG 852.314... 0�0 0��UF 852.314... 0��
• C 852.314... 0�0 0��• F 852.314... 0�0 0��• G 852.314... 0��
852
p 5 L mm 6,0 6,0 7,0Shank Order No.
FG 855.314... 0�� 0�� 0�5• F 855.314... 0��• G 855.314... 0�� 0�� 0�5
• SG 855.314... 0�� 0�� 0�5
855
p 5 L mm 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0Shank Order No.
FG 856.314... 009 0�0 0�� 0�� 0�6 0�8 0�� 0�5• C 856.314... 0�0 0�� 0�6• F 856.314... 009 0�0 0�� 0�� 0�6 0�8 0�� 0�5• G 856.314... 0�� 0�� 0�6 0�8 0�� 0�5
• SG 856.314... 0�� 0�6 0�8 0�� 0�5
856
p 5 L mm 9,0 9,0 9,0 9,0Shank Order No.
FG 856L.314... 0�� 0�6 0�8 0�0• F 856L.314... 0�� 0�6 0�8 0�0• G 856L.314... 0�� 0�6 0�8 0�0
• SG 856L.314... 0�� 0�6 0�8 0�0
856L
p 5 L mm �0,0 �0,0 �0,0Shank Order No.
FG 857.314... 0�� 0�� 0�6• F 857.314... 0�� 0��• G 857.314... 0�� 0�� 0�6
• SG 857.314... 0�� 0�6
857
p 5 L mm 8,0 8,0 8,0 8,0 8,0Shank Order No.
FG 858.314... 0�0 0�� 0�� 0�6 0�8UF 858.314... 0��
• C 858.314... 0�0 0�� 0�� 0�6• F 858.314... 0�0 0�� 0�� 0�6 0�8• G 858.314... 0�0 0�� 0�� 0�6 0�8
• SG 858.314... 0�� 0�6 0�8
858
p 5 L mm �0,0 �0,0 �0,0 �0,0 �0,0 �0,0Shank Order No.
FG 859.314... 0�0 0�� 0�� 0�6 0�8 0��UF 859.314... 0�0 0�6 0�8
• C 859.314... 0�0 0�� 0�� 0�6 0�8• F 859.314... 0�0 0�� 0�� 0�6 0�8• G 859.314... 0�0 0�� 0�� 0�6 0�8 0��
• SG 859.314... 0�8RA 859.204... 0�� 0�6
859
p 5 L mm ��,5 ��,5 ��,5 ��,5Shank Order No.
FG 859L.314... 0�0 0�� 0�6 0�8UF 859L.314... 0�0
• C 859L.314... 0�0 0�� 0�6• F 859L.314... 0�0 0�� 0�6• G 859L.314... 0�� 0�6 0�8
• SG 859L.314... 0�6 0�8
859L
p 5 L mm �,0 5,0 5,0Shank Order No.
FG 860.314... 0�0 0�� 0��• C 860.314... 0�0 0�� 0��• F 860.314... 0�0 0�� 0��• G 860.314... 0�0 0�� 0��
• SG 860.314... 0��RA 860.204... 0��
860
p 5 L mm 6,0 6,0Shank Order No.
FG 861.314... 0�� 0��• C 861.314... 0�� 0��• F 861.314... 0��• G 861.314... 0�� 0��
861
p 5 L mm 8,0 8,0 8,0 8,0 8,0Shank Order No. 834 834 834A 868A 868A
FG 862.314... 009 0�0 0�� 0�� 0�6UF 862.314... 0�0
• C 862.314... 009 0�0 0�� 0�� 0�6• F 862.314... 009 0�0 0�� 0�� 0�6• G 862.314... 0�0 0�� 0�� 0�6
• SG 862.314... 0�� 0�� 0�6RA 862.204... 0�� 0�6
862
SET730C850.314.010
�6
DiAmANTDiAmoND • DiAmANT
p 5 L mm 8,0 8,0Shank Order No.
FG 847KR.314... 0�6 0��• F 847KR.314... 0�6 0��• G 847KR.314... 0�6 0��
847KR
p 5 L mm �0,0 �0,0 �0,0 �0,0 �0,0 �0,0Shank Order No.
FG 848.314... 0�0 0�� 0�� 0�6 0�8 0��• C 848.314... 0�0 0�� 0�� 0�6• F 848.314... 0�0 0�� 0�� 0�6 0�8• G 848.314... 0�0 0�� 0�� 0�6 0�8 0��
• SG 848.314... 0�6 0�8 0��
848
p 5 L mm ��,5 ��,5 ��,5 ��,5Shank Order No.
FG 848L.314... 0�� 0�� 0�6 0�8• G 848L.314... 0�� 0�6 0�8
• SG 848L.314... 0�� 0�6 0�8
848L
p 5 L mm �,0 �,0 �,0 �,0 �,0 �,0Shank Order No.
FG 849.314... 009 0�0 0�� 0�� 0�6• F 849.314... 0��• G 849.314... 009 0�0 0�� 0�� 0�6 0�5
RA 849.204... 0�6
849
p 5 L mm �0,0 �0,0 �0,0 �0,0 �0,0 �0,0Shank Order No.
FG 850.314... 0�0 0�� 0�� 0�6 0�8 0��• C 850.314... 0�0 0�� 0�� 0�6 0�8• F 850.314... 0�0 0�� 0�� 0�6 0�8 0��• G 850.314... 0�0 0�� 0�� 0�6 0�8 0��
• SG 850.314... 0�� 0�6 0�8 0��
850
p 5 L mm ��,5 ��,5 ��,5 ��,5Shank Order No.
FG 850L.314... 0�� 0�� 0�6 0�8• C 850L.314... 0��• F 850L.314... 0�� 0��• G 850L.314... 0�� 0�� 0�6 0�8
• SG 850L.314... 0�� 0�6 0�8
850L
p 5 L mm 8,0 8,0 8,0Shank Order No.
FG 851.314... 0�0 0�� 0�6• F 851.314... 0�0 0��• G 851.314... 0�� 0�6
851
p 5 L mm �,0 6,0Shank Order No.
FG 852.314... 0�0 0��UF 852.314... 0��
• C 852.314... 0�0 0��• F 852.314... 0�0 0��• G 852.314... 0��
852
p 5 L mm 6,0 6,0 7,0Shank Order No.
FG 855.314... 0�� 0�� 0�5• F 855.314... 0��• G 855.314... 0�� 0�� 0�5
• SG 855.314... 0�� 0�� 0�5
855
p 5 L mm 8,0 8,0 8,0 8,0 8,0 8,0 8,0 8,0Shank Order No.
FG 856.314... 009 0�0 0�� 0�� 0�6 0�8 0�� 0�5• C 856.314... 0�0 0�� 0�6• F 856.314... 009 0�0 0�� 0�� 0�6 0�8 0�� 0�5• G 856.314... 0�� 0�� 0�6 0�8 0�� 0�5
• SG 856.314... 0�� 0�6 0�8 0�� 0�5
856
p 5 L mm 9,0 9,0 9,0 9,0Shank Order No.
FG 856L.314... 0�� 0�6 0�8 0�0• F 856L.314... 0�� 0�6 0�8 0�0• G 856L.314... 0�� 0�6 0�8 0�0
• SG 856L.314... 0�� 0�6 0�8 0�0
856L
p 5 L mm �0,0 �0,0 �0,0Shank Order No.
FG 857.314... 0�� 0�� 0�6• F 857.314... 0�� 0��• G 857.314... 0�� 0�� 0�6
• SG 857.314... 0�� 0�6
857
p 5 L mm 8,0 8,0 8,0 8,0 8,0Shank Order No.
FG 858.314... 0�0 0�� 0�� 0�6 0�8UF 858.314... 0��
• C 858.314... 0�0 0�� 0�� 0�6• F 858.314... 0�0 0�� 0�� 0�6 0�8• G 858.314... 0�0 0�� 0�� 0�6 0�8
• SG 858.314... 0�� 0�6 0�8
858
p 5 L mm �0,0 �0,0 �0,0 �0,0 �0,0 �0,0Shank Order No.
FG 859.314... 0�0 0�� 0�� 0�6 0�8 0��UF 859.314... 0�0 0�6 0�8
• C 859.314... 0�0 0�� 0�� 0�6 0�8• F 859.314... 0�0 0�� 0�� 0�6 0�8• G 859.314... 0�0 0�� 0�� 0�6 0�8 0��
• SG 859.314... 0�8RA 859.204... 0�� 0�6
859
p 5 L mm ��,5 ��,5 ��,5 ��,5Shank Order No.
FG 859L.314... 0�0 0�� 0�6 0�8UF 859L.314... 0�0
• C 859L.314... 0�0 0�� 0�6• F 859L.314... 0�0 0�� 0�6• G 859L.314... 0�� 0�6 0�8
• SG 859L.314... 0�6 0�8
859L
p 5 L mm �,0 5,0 5,0Shank Order No.
FG 860.314... 0�0 0�� 0��• C 860.314... 0�0 0�� 0��• F 860.314... 0�0 0�� 0��• G 860.314... 0�0 0�� 0��
• SG 860.314... 0��RA 860.204... 0��
860
p 5 L mm 6,0 6,0Shank Order No.
FG 861.314... 0�� 0��• C 861.314... 0�� 0��• F 861.314... 0��• G 861.314... 0�� 0��
861
p 5 L mm 8,0 8,0 8,0 8,0 8,0Shank Order No. 834 834 834A 868A 868A
FG 862.314... 009 0�0 0�� 0�� 0�6UF 862.314... 0�0
• C 862.314... 009 0�0 0�� 0�� 0�6• F 862.314... 009 0�0 0�� 0�� 0�6• G 862.314... 0�0 0�� 0�� 0�6
• SG 862.314... 0�� 0�� 0�6RA 862.204... 0�� 0�6
862
SET731F850.314.014
SET1194C7 314 008
�7
DiAmANTDiAmoND • DiAmANT
p 5 L mm �0,0 �0,0 �0,0 �0,0 �0,0Shank Order No. 834 834 834A 868A 868A
FG 863.314... 0�0 0�� 0�� 0�6 0�8UF 863.314... 0�0 0��
• C 863.314... 0�0 0�� 0�� 0�6• F 863.314... 0�0 0�� 0�� 0�6 0�8• G 863.314... 0�� 0�� 0�6 0�8
• SG 863.314... 0�� 0�6 0�8RA 863.204... 0�� 0�6 0�8
• C 863.204... 0��
863
p 5 L mm ��,0 ��,0 ��,0 ��,0Shank Order No.
FG 864.314... 0�� 0�� 0�6 0�8• C 864.314... 0�6• F 864.314... 0�� 0�� 0�6• G 864.314... 0�� 0�6 0�8
• SG 864.314... 0�6 0�8
864
p 5 L mm 6,0 6,0 6,0Shank Order No.
FG 877.314... 009 0�0 0��• F 877.314... 0�0 0��• G 877.314... 0��
877
p 5 L mm 8,0 8,0 8,0 8,0 8,0 8,0Shank Order No.
FG 878.314... 008 009 0�0 0�� 0�� 0�6• C 878.314... 0�0 0�� 0��• F 878.314... 008 009 0�0 0�� 0�� 0�6• G 878.314... 0�0 0�� 0�� 0�6
• SG 878.314... 0�� 0�� 0�6
878
p 5 L mm �0,0 �0,0 �0,0 �0,0 �0,0Shank Order No.
FG 879.314... 0�0 0�� 0�� 0�6 0�8• C 879.314... 0�� 0�� 0�6• F 879.314... 0�0 0�� 0�� 0�6 0�8• G 879.314... 0�0 0�� 0�� 0�6 0�8
• SG 879.314... 0�� 0�� 0�6 0�8
879
p 5 L mm ��,0 ��,0Shank Order No.
FG 879L.314... 0�� 0��• F 879L.314... 0�� 0��• G 879L.314... 0�� 0��
• SG 879L.314... 0�� 0��
879L
p 5 L mm 8,0 8,0 8,0 8,0 8,0Shank Order No.
FG 878K.314... 0�� 0�� 0�6 0�8 0��• C 878K.314... 0��• F 878K.314... 0�� 0�� 0�6 0�8 0��• G 878K.314... 0�� 0�� 0�6 0�8 0��
• SG 878K.314... 0�� 0�� 0�6 0�8 0��
878K
p 5 L mm �0,0 �0,0 �0,0 �0,0 �0,0 �0,0Shank Order No.
FG 879K.314... 0�� 0�� 0�6 0�8 0�� 0��• C 879K.314... 0��• F 879K.314... 0�� 0�� 0�6 0�8• G 879K.314... 0�� 0�� 0�6 0�8 0�� 0��
• SG 879K.314... 0�� 0�� 0�6 0�8 0��
879K
p 5 L mm 6,0 6,0 6,0Shank Order No.
FG 880.314... 0�0 0�� 0��• C 880.314... 0��• F 880.314... 0�� 0��• G 880.314... 0�� 0��
• SG 880.314... 0��
880
p 5 L mm 8,0 8,0 8,0 8,0 8,0Shank Order No.
FG 881.314... 0�0 0�� 0�� 0�6 0�8• C 881.314... 0�� 0��• F 881.314... 0�0 0�� 0�� 0�6 0�8• G 881.314... 0�0 0�� 0�� 0�6 0�8
• SG 881.314... 0�� 0�6 0�8
881
p 5 L mm 7,0 8,0 8,0 8,0Shank Order No.
FG • SG 881KS.314... 0�� 0�� 0�5 0�6
881KS
p 5 L mm �0,0 �0,0Shank Order No.
FG 882.314... 0�� 0��• C 882.314... 0��• F 882.314... 0�� 0��• G 882.314... 0�� 0��
• SG 882.314... 0��
882
p 5 L mm 8,0 8,0 8,0 8,0 8,0Shank Order No. 834 834 834A 868A 868A
FG 885.314... 008 0�0 0�� 0�� 0�6• F 885.314... 0�0 0�� 0��• G 885.314... 0�� 0�� 0�6
• SG 885.314... 0�� 0��
885
p 5 L mm �0,0 �0,0 �0,0 �0,0Shank Order No. 834 834 834A 868A
FG 886.314... 0�0 0�� 0�� 0�6• C 886.314... 0��• F 886.314... 0�0 0�� 0�� 0�6• G 886.314... 0�� 0�� 0�6
• SG 886.314... 0�� 0�� 0�6
886
p 5 L mm 8,0Shank Order No.
FG 888.314... 0��• C 888.314... 0��• F 888.314... 0��• G 888.314... 0��
888
SET1215879.314.016
��
DiAmANTDiAmoND • DiAmANT
p 5 L mmShank Order No.
FG 801.314... 007 008 009 0�0 0�� 0�� 0�6 0�8 0�� 0�� 0�5 0�9 0�5• C 801.314... 0�� 0�� 0�6 0�8 0�� 0�� 0�5 0�9 0�5• F 801.314... 007 008 009 0�0 0�� 0�� 0�6 0�8 0�� 0�� 0�5 0�9 0�5• G 801.314... 0�� 0�� 0�6 0�8 0�� 0�� 0�5 0�9 0�5
• SG 801.314... 0�� 0�� 0�6 0�8 0�� 0�� 0�5 0�9 0�5RA 801.204... 0�0 0�� 0�� 0�6 0�8 0�� 0�9
801
p 5 L mmShank Order No.
FG 801L.314... 0�� 0�6 0�� 0�9• G 801L.314... 0�� 0�6 0�� 0�9
• SG 801L.314... 0�� 0�6 0�� 0�9
801L
p 5 L mmShank Order No.
FG 802.314... 008 009 0�0 0�� 0�� 0�6 0�8 0��• F 802.314... 0�6• G 802.314... 0�� 0�� 0�6 0�8 0��
• SG 802.314... 0�� 0�6 0�8 0��
802
p 5 L mm �,0 �,0 �,0 �,0 �,� �,6 �,6 �,6 �,9 �,5Shank Order No.
FG 805.314... 007 008 009 0�0 0�� 0�� 0�6 0�8 0�� 0��• F 805.314... 0�� 0�6• G 805.314... 0�� 0�� 0�6 0�8 0��
• SG 805.314... 0�� 0�6 0�8 0��RA 805.204... 0�0 0�� 0�� 0�6 0�8
805
p 5 L mm �,0 �,0 �,0 �,0 �,0 �,0 �,0 �,0 �,0Shank Order No.
FG 806.314... 007 008 009 0�0 0�� 0�� 0�6 0�8 0��• G 806.314... 009 0�0 0�� 0�� 0�6 0�8 0��
• SG 806.314... 0�� 0�6 0�8
806
p 5 L mm �,0 �,5 �,5 �,0 5,0Shank Order No.
FG 807.314... 0�0 0�� 0�� 0�6 0�8• F 807.314... 0�� 0�6• G 807.314... 0�� 0�� 0�6 0�8
• SG 807.314... 0�6
807
p 5 L mm 0,7 0,8Shank Order No.
FG 808.314... 0�8 0��• G 808.314... 0��
808
p 5 L mm �,� 7,0Shank Order No.
FG 811.314... 0�� 0�7• G 811.314... 0�� 0�7
• SG 811.314... 0�� 0�7
811
p 5 L mm �,5 �,5 �,5 �,0 �,0Shank Order No.
FG 813.314... 0�0 0�� 0�� 0�6 0�8• G 813.314... 0�� 0�� 0�6 0�8
• SG 813.314... 0�6 0�8
813
p 5 L mm 0,5 0,7 0,7 0,8 �,0 �,5Shank Order No.
FG 815.314... 0�� 0�6 0�8 0�� 0�7 0��• G 815.314... 0�6 0�8 0�� 0�7 0��
815
p 5 L mm 0,7 0,7 0,7Shank Order No.
FG 818.314... 0�5 0�0 050• G 818.314... 0�5 0�0 050
818
p 5 L mm �,0 �,0 �,0 �,0Shank Order No.
FG 822.314... 008 009 0�0 0��• F 822.314... 0��• G 822.314... 008 009 0�0 0��
• SG 822.314... 0��
822
p 5 L mm �,5 �,7 �,7 �,7 �,7 �,7 �,7 5,�Shank Order No.
FG 830.314... 008 009 0�0 0�� 0�� 0�6 0�8 0��• C 830.314... 0��• F 830.314... 008 0�0 0�� 0��• G 830.314... 0�0 0�� 0�� 0�6 0�8 0��
• SG 830.314... 0�� 0�� 0�6 0�8 0��
830
p 5 L mm �,0 5,0 5,0 5,0 5,0 7,0Shank Order No.
FG 830L.314... 0�� 0�� 0�6 0�8 0�� 0�5• C 830L.314... 0��• F 830L.314... 0�� 0�� 0�6• G 830L.314... 0�� 0�� 0�6 0�8 0�� 0�5
• SG 830L.314... 0�� 0�6 0�8 0�� 0�5
830L
SET1214801.314.007
SET1212850KR.314.014
70
Shank L mm 11,5 11,5 11,5 11,5 11,5ISO Order No.
FG 806 314 174 524... 848L.314... 012 014 016 018 021• 806 314 174 534... G 848L.314... 014 016 018• 806 314 174 544... SG 848L.314... 014 016 018
848LKonus flach langFlat End Taper longCône, bout plat, long
p 5
Shank L mm 10,0 10,0 10,0 10,0 10,0 10,0 10,0ISO Order No.
FG 806 314 199 524... 850.314... 010 012 014 016 018 023 031• 806 314 199 504... C 850.314... 010 012 014 016 018• 806 314 199 514... F 850.314... 010 012 014 016 018 023• 806 314 199 534... G 850.314... 010 012 014 016 018 023 031• 806 314 199 544... SG 850.314... 014 016 018 023
RA 806 204 199 524... 850.204... 012
850Konus rundRound End TaperCône, bout arrondi
p 5
Shank L mm 4,0 4,0 4,0 4,0 4,0ISO Order No. 834 834 834A 868A
FG 806 314 196 524... 849.314... 009 010 012• 806 314 196 514... F 849.314... 012• 806 314 196 534... G 849.314... 012 016 025
RA 806 204 196 524... 849.204... 016
849Konus rundRound End TaperCône, bout arrondi
p 5
Shank L mm 11,5 11,5 11,5 11,5ISO Order No.
FG 806 314 200 524... 850L.314... 012 014 016 018• 806 314 200 504... C 850L.314... 014• 806 314 200 514... F 850L.314... 012 014• 806 314 200 534... G 850L.314... 012 014 016 018• 806 314 200 544... SG 850L.314... 014 016 018
850LKonus lang Kante rundLong Round TaperCône, bout arrondi, long
p 5
Shank L mm 10,0 10,0ISO Order No.
FG 806 314 553 524... 850KR.314... 014 018• 806 314 553 534... G 850KR.314... 014 018• 806 314 553 544... SG 850KR.314... 014 018
850KRKonus Kante rundRound Edge TaperCône, bord arrondi
p 5
DIAMANT • DIAMOND • DIAMANT
Shank L mm 4,0 6,0 6,0 7,0ISO Order No.
FG 806 314 164 524... 852.314... 010 012 023• 806 314 164 504... C 852.314... 010 012• 806 314 164 514... F 852.314... 010 012• 806 314 164 534... G 852.314... 012 023• 806 314 164 544... SG 852.314... 037
852Konus SpitzeX-mas treeCône, pointu
p 5
Shank L mm 8,0 8,0 8,0ISO Order No.
FG 806 314 219 524... 851.314... 010 012 016• 806 314 219 514... F 851.314... 010 012• 806 314 219 534... G 851.314... 012 016
851Konus SicherheitsspitzeRound Safe End TaperCône à extrémité mousse
p 5
DIA
MA
NT
•
DIA
MO
ND
•
DIA
MA
NT
SET1213850KR.314.018
70
Shank L mm 11,5 11,5 11,5 11,5 11,5ISO Order No.
FG 806 314 174 524... 848L.314... 012 014 016 018 021• 806 314 174 534... G 848L.314... 014 016 018• 806 314 174 544... SG 848L.314... 014 016 018
848LKonus flach langFlat End Taper longCône, bout plat, long
p 5
Shank L mm 10,0 10,0 10,0 10,0 10,0 10,0 10,0ISO Order No.
FG 806 314 199 524... 850.314... 010 012 014 016 018 023 031• 806 314 199 504... C 850.314... 010 012 014 016 018• 806 314 199 514... F 850.314... 010 012 014 016 018 023• 806 314 199 534... G 850.314... 010 012 014 016 018 023 031• 806 314 199 544... SG 850.314... 014 016 018 023
RA 806 204 199 524... 850.204... 012
850Konus rundRound End TaperCône, bout arrondi
p 5
Shank L mm 4,0 4,0 4,0 4,0 4,0ISO Order No. 834 834 834A 868A
FG 806 314 196 524... 849.314... 009 010 012• 806 314 196 514... F 849.314... 012• 806 314 196 534... G 849.314... 012 016 025
RA 806 204 196 524... 849.204... 016
849Konus rundRound End TaperCône, bout arrondi
p 5
Shank L mm 11,5 11,5 11,5 11,5ISO Order No.
FG 806 314 200 524... 850L.314... 012 014 016 018• 806 314 200 504... C 850L.314... 014• 806 314 200 514... F 850L.314... 012 014• 806 314 200 534... G 850L.314... 012 014 016 018• 806 314 200 544... SG 850L.314... 014 016 018
850LKonus lang Kante rundLong Round TaperCône, bout arrondi, long
p 5
Shank L mm 10,0 10,0ISO Order No.
FG 806 314 553 524... 850KR.314... 014 018• 806 314 553 534... G 850KR.314... 014 018• 806 314 553 544... SG 850KR.314... 014 018
850KRKonus Kante rundRound Edge TaperCône, bord arrondi
p 5
DIAMANT • DIAMOND • DIAMANT
Shank L mm 4,0 6,0 6,0 7,0ISO Order No.
FG 806 314 164 524... 852.314... 010 012 023• 806 314 164 504... C 852.314... 010 012• 806 314 164 514... F 852.314... 010 012• 806 314 164 534... G 852.314... 012 023• 806 314 164 544... SG 852.314... 037
852Konus SpitzeX-mas treeCône, pointu
p 5
Shank L mm 8,0 8,0 8,0ISO Order No.
FG 806 314 219 524... 851.314... 010 012 016• 806 314 219 514... F 851.314... 010 012• 806 314 219 534... G 851.314... 012 016
851Konus SicherheitsspitzeRound Safe End TaperCône à extrémité mousse
p 5
DIA
MA
NT
•
DIA
MO
ND
•
DIA
MA
NT
��
DiAmANTDiAmoND • DiAmANT
p 5 L mmShank Order No.
FG 801.314... 007 008 009 0�0 0�� 0�� 0�6 0�8 0�� 0�� 0�5 0�9 0�5• C 801.314... 0�� 0�� 0�6 0�8 0�� 0�� 0�5 0�9 0�5• F 801.314... 007 008 009 0�0 0�� 0�� 0�6 0�8 0�� 0�� 0�5 0�9 0�5• G 801.314... 0�� 0�� 0�6 0�8 0�� 0�� 0�5 0�9 0�5
• SG 801.314... 0�� 0�� 0�6 0�8 0�� 0�� 0�5 0�9 0�5RA 801.204... 0�0 0�� 0�� 0�6 0�8 0�� 0�9
801
p 5 L mmShank Order No.
FG 801L.314... 0�� 0�6 0�� 0�9• G 801L.314... 0�� 0�6 0�� 0�9
• SG 801L.314... 0�� 0�6 0�� 0�9
801L
p 5 L mmShank Order No.
FG 802.314... 008 009 0�0 0�� 0�� 0�6 0�8 0��• F 802.314... 0�6• G 802.314... 0�� 0�� 0�6 0�8 0��
• SG 802.314... 0�� 0�6 0�8 0��
802
p 5 L mm �,0 �,0 �,0 �,0 �,� �,6 �,6 �,6 �,9 �,5Shank Order No.
FG 805.314... 007 008 009 0�0 0�� 0�� 0�6 0�8 0�� 0��• F 805.314... 0�� 0�6• G 805.314... 0�� 0�� 0�6 0�8 0��
• SG 805.314... 0�� 0�6 0�8 0��RA 805.204... 0�0 0�� 0�� 0�6 0�8
805
p 5 L mm �,0 �,0 �,0 �,0 �,0 �,0 �,0 �,0 �,0Shank Order No.
FG 806.314... 007 008 009 0�0 0�� 0�� 0�6 0�8 0��• G 806.314... 009 0�0 0�� 0�� 0�6 0�8 0��
• SG 806.314... 0�� 0�6 0�8
806
p 5 L mm �,0 �,5 �,5 �,0 5,0Shank Order No.
FG 807.314... 0�0 0�� 0�� 0�6 0�8• F 807.314... 0�� 0�6• G 807.314... 0�� 0�� 0�6 0�8
• SG 807.314... 0�6
807
p 5 L mm 0,7 0,8Shank Order No.
FG 808.314... 0�8 0��• G 808.314... 0��
808
p 5 L mm �,� 7,0Shank Order No.
FG 811.314... 0�� 0�7• G 811.314... 0�� 0�7
• SG 811.314... 0�� 0�7
811
p 5 L mm �,5 �,5 �,5 �,0 �,0Shank Order No.
FG 813.314... 0�0 0�� 0�� 0�6 0�8• G 813.314... 0�� 0�� 0�6 0�8
• SG 813.314... 0�6 0�8
813
p 5 L mm 0,5 0,7 0,7 0,8 �,0 �,5Shank Order No.
FG 815.314... 0�� 0�6 0�8 0�� 0�7 0��• G 815.314... 0�6 0�8 0�� 0�7 0��
815
p 5 L mm 0,7 0,7 0,7Shank Order No.
FG 818.314... 0�5 0�0 050• G 818.314... 0�5 0�0 050
818
p 5 L mm �,0 �,0 �,0 �,0Shank Order No.
FG 822.314... 008 009 0�0 0��• F 822.314... 0��• G 822.314... 008 009 0�0 0��
• SG 822.314... 0��
822
p 5 L mm �,5 �,7 �,7 �,7 �,7 �,7 �,7 5,�Shank Order No.
FG 830.314... 008 009 0�0 0�� 0�� 0�6 0�8 0��• C 830.314... 0��• F 830.314... 008 0�0 0�� 0��• G 830.314... 0�0 0�� 0�� 0�6 0�8 0��
• SG 830.314... 0�� 0�� 0�6 0�8 0��
830
p 5 L mm �,0 5,0 5,0 5,0 5,0 7,0Shank Order No.
FG 830L.314... 0�� 0�� 0�6 0�8 0�� 0�5• C 830L.314... 0��• F 830L.314... 0�� 0�� 0�6• G 830L.314... 0�� 0�� 0�6 0�8 0�� 0�5
• SG 830L.314... 0�� 0�6 0�8 0�� 0�5
830L
SET732G801.314.014
SET733SG830L.314.021
��
DiAmANTDiAmoND • DiAmANT
p 5 L mmShank Order No.
FG 801.314... 007 008 009 0�0 0�� 0�� 0�6 0�8 0�� 0�� 0�5 0�9 0�5• C 801.314... 0�� 0�� 0�6 0�8 0�� 0�� 0�5 0�9 0�5• F 801.314... 007 008 009 0�0 0�� 0�� 0�6 0�8 0�� 0�� 0�5 0�9 0�5• G 801.314... 0�� 0�� 0�6 0�8 0�� 0�� 0�5 0�9 0�5
• SG 801.314... 0�� 0�� 0�6 0�8 0�� 0�� 0�5 0�9 0�5RA 801.204... 0�0 0�� 0�� 0�6 0�8 0�� 0�9
801
p 5 L mmShank Order No.
FG 801L.314... 0�� 0�6 0�� 0�9• G 801L.314... 0�� 0�6 0�� 0�9
• SG 801L.314... 0�� 0�6 0�� 0�9
801L
p 5 L mmShank Order No.
FG 802.314... 008 009 0�0 0�� 0�� 0�6 0�8 0��• F 802.314... 0�6• G 802.314... 0�� 0�� 0�6 0�8 0��
• SG 802.314... 0�� 0�6 0�8 0��
802
p 5 L mm �,0 �,0 �,0 �,0 �,� �,6 �,6 �,6 �,9 �,5Shank Order No.
FG 805.314... 007 008 009 0�0 0�� 0�� 0�6 0�8 0�� 0��• F 805.314... 0�� 0�6• G 805.314... 0�� 0�� 0�6 0�8 0��
• SG 805.314... 0�� 0�6 0�8 0��RA 805.204... 0�0 0�� 0�� 0�6 0�8
805
p 5 L mm �,0 �,0 �,0 �,0 �,0 �,0 �,0 �,0 �,0Shank Order No.
FG 806.314... 007 008 009 0�0 0�� 0�� 0�6 0�8 0��• G 806.314... 009 0�0 0�� 0�� 0�6 0�8 0��
• SG 806.314... 0�� 0�6 0�8
806
p 5 L mm �,0 �,5 �,5 �,0 5,0Shank Order No.
FG 807.314... 0�0 0�� 0�� 0�6 0�8• F 807.314... 0�� 0�6• G 807.314... 0�� 0�� 0�6 0�8
• SG 807.314... 0�6
807
p 5 L mm 0,7 0,8Shank Order No.
FG 808.314... 0�8 0��• G 808.314... 0��
808
p 5 L mm �,� 7,0Shank Order No.
FG 811.314... 0�� 0�7• G 811.314... 0�� 0�7
• SG 811.314... 0�� 0�7
811
p 5 L mm �,5 �,5 �,5 �,0 �,0Shank Order No.
FG 813.314... 0�0 0�� 0�� 0�6 0�8• G 813.314... 0�� 0�� 0�6 0�8
• SG 813.314... 0�6 0�8
813
p 5 L mm 0,5 0,7 0,7 0,8 �,0 �,5Shank Order No.
FG 815.314... 0�� 0�6 0�8 0�� 0�7 0��• G 815.314... 0�6 0�8 0�� 0�7 0��
815
p 5 L mm 0,7 0,7 0,7Shank Order No.
FG 818.314... 0�5 0�0 050• G 818.314... 0�5 0�0 050
818
p 5 L mm �,0 �,0 �,0 �,0Shank Order No.
FG 822.314... 008 009 0�0 0��• F 822.314... 0��• G 822.314... 008 009 0�0 0��
• SG 822.314... 0��
822
p 5 L mm �,5 �,7 �,7 �,7 �,7 �,7 �,7 5,�Shank Order No.
FG 830.314... 008 009 0�0 0�� 0�� 0�6 0�8 0��• C 830.314... 0��• F 830.314... 008 0�0 0�� 0��• G 830.314... 0�0 0�� 0�� 0�6 0�8 0��
• SG 830.314... 0�� 0�� 0�6 0�8 0��
830
p 5 L mm �,0 5,0 5,0 5,0 5,0 7,0Shank Order No.
FG 830L.314... 0�� 0�� 0�6 0�8 0�� 0�5• C 830L.314... 0��• F 830L.314... 0�� 0�� 0�6• G 830L.314... 0�� 0�� 0�6 0�8 0�� 0�5
• SG 830L.314... 0�� 0�6 0�8 0�� 0�5
830L
SET734F835.314.010
�5
DiAmANTDiAmoND • DiAmANT
p 5 L mm 6,0 6,0 �,0 �,0Shank Order No.
FG 834.314... 0�6 0��868A.314... 0�8 0��
Schnittiefe • Cutting depth • Cutting depth – Tmm0,� 0,5 0,� 0,�
834868A
p 5 L mm �,0 �,0 �,0 �,0 �,0 �,0 �,0 �,0Shank Order No. 834 834 834A 868A 868A
FG 835.314... 007 008 009 0�0 0�� 0�� 0�6 0�8• C 835.314... 0��• F 835.314... 0�0 0�� 0��• G 835.314... 009 0�0 0�� 0�� 0�6 0�8
• SG 835.314... 0�0 0�� 0�� 0�6RA 835.204... 0�0 0�� 0�� 0�6
835
p 5 L mm �0,0 �0,0 �0,0 �0,0Shank Order No.
FG 837L.314... 0�0 0�� 0�� 0�6• F 837L.314... 0��• G 837L.314... 0�0 0�� 0�� 0�6
• SG 837L.314... 0�� 0�6
837L
p 5 L mm �,0 �,0 �,0 �,0 �,0Shank Order No.
FG 838.314... 008 009 0�0 0�� 0��• F 838.314... 0�0• G 838.314... 0�0 0�� 0��
• SG 838.314... 0��
838
p 5 L mm 0,� 0,� 0,�Shank Order No.
FG 839.314... 0�� 0�� 0�6• F 839.314... 0�� 0��
839
p 5 L mm 6,0 6,0 6,0 6,0 6,0 6,0Shank Order No.
FG 836.314... 008 0�0 0�� 0�� 0�6 0�8• F 836.314... 0�0 0��• G 836.314... 0�0 0�� 0�� 0�6 0�8
• SG 836.314... 0�� 0�� 0�6
836
p 5 L mm �,0 �,0 �,0 �,0 �,0Shank Order No.
FG 835KR.314... 008 0�0 0�� 0��• F 835KR.314... 008 0�0 0��• G 835KR.314... 0�0 0�� 0�� 0�6
• SG 835KR.314... 0�� 0�6
835KR
p 5 L mm 8,0 8,0 8,0 8,0 8,0Shank Order No.
FG 837.314... 0�0 0�� 0�� 0�6 0�8• F 837.314... 0�� 0��• G 837.314... 0�0 0�� 0�� 0�6 0�8
• SG 837.314... 0�� 0�� 0�6 0�8
837
p 5 L mm 6,0 6,0 6,0 6,0 6,0Shank Order No.
FG 836KR.314... 008 0�0 0�� 0�� 0�6• F 836KR.314... 008 0�0 0��• G 836KR.314... 0�0 0�� 0�� 0�6
• SG 836KR.314... 0�� 0�6
836KR
p 5 L mm 8,0 8,0 8,0 8,0Shank Order No.
FG 837KR.314... 0�0 0�� 0�� 0�6• F 837KR.314... 0�0 0�� 0�� 0�6• G 837KR.314... 0�0 0�� 0�� 0�6
• SG 837KR.314... 0�� 0�� 0�6
837KR
p 5 L mm 0,� 0,� 0,�Shank Order No.
FG 840.314... 0�� 0�� 0�6
840
p 5 L mm ��,0 ��,0 ��,0Shank Order No.
FG 842.314... 0�� 0�� 0�8• G 842.314... 0�� 0�� 0�8
• SG 842.314... 0�� 0��
842
p 5 L mm �,0 �,0 �,0 �,0 �,0Shank Order No.
FG 845.314... 009 0�0 0�� 0�� 0�6• G 845.314... 0�� 0�� 0�6
845
p 5 L mm �,0 �,0Shank Order No.
FG 845KR.314... 0�8 0�5• C 845KR.314... 0�5• F 845KR.314... 0�8 0�5• G 845KR.314... 0�8 0�5
845KR
p 5 L mm 6,0 6,0 7,0Shank Order No.
FG 846.314... 0�� 0�6 0�5• F 846.314... 0�5• G 846.314... 0�� 0�6 0�5
846
p 5 L mm 8,0 8,0 8,0 8,0 8,0 8,0Shank Order No.
FG 847.314... 0�0 0�� 0�� 0�6 0�8 0��• C 847.314... 0�0• F 847.314... 0�0 0�� 0�� 0�6 0��• G 847.314... 0�0 0�� 0�� 0�6 0�8 0��
• SG 847.314... 0�� 0�6 0�8
847
SET1156TC246.314.009
SET1157TC246.314.010
SET1158TC246.314.012
SET1161TC850.4.31
SET1162TC850.6.31
SET1155TC46.314.012
�0
fiNiErErfiNishErs • iNsTrUmENTs à fiNir
Shank L mm 6,0Size ISO Order No. 0�0
�/�0 mm US No. 760�FG • 500 314 �65 07�... TC50.314... 0�0
TC50Interdental • InterproximalInter - proximal• �� Schneiden • Blades • Lames
d FG �00.000p 6Shank L mm 8,0
Size ISO Order No. 0���/�0 mm
FG • 500 314 ��9 07�... TC48L.314... 0��• 500 314 ��9 0��... TC48LF.314... 0��• 500 314 ��9 0��... TC48LUF.314... 0��
TC48LFlamme lang • Flame long Flamme longe• �� Schneiden • Blades • Lames• �0 Schneiden • Blades • Lames• �0 Schneiden • Blades • Lames
d FG �00.000p 6
Shank L mm �,5 �,8Size ISO Order No. 0�� 0�8
�/�0 mm US No. 7�0� 7�06FG • 500 314 �5� 07�... TC46.314... 0�� 0�8
TC46Flamme • Flame • Flamme• �� Schneiden • Blades • Lames
d FG �00.000 p 6
Shank L mm 6,0Size ISO Order No. 0��
�/�0 mmFG • 500 314 �6� 07�... TC134.314... 0��
• 500 314 �6� 0��... TC134F.314... 0��• 500 314 �6� 0��... TC134UF.314... 0��
TC134mittlere Spitze • Medium PointPointe moyenne• 08 Schneiden • Blades • Lames• �6 Schneiden • Blades • Lames• �0 Schneiden • Blades • Lames
d FG �00.000p 6
Shank L mm 9,0Size ISO Order No. 0��
�/�0 mmFG • 500 314 �66 07�... TC135.314... 0��
• 500 314 �66 0��... TC135F.314... 0��• 500 314 �66 0��... TC135UF.314... 0��
TC135lange Spitze • Long PointLongue pointe• 08 Schneiden • Blades • Lames• �6 Schneiden • Blades • Lames• �0 Schneiden • Blades • Lames
d FG �00.000p 6
Shank L mm �,0Size ISO Order No. 008
�/�0 mmFG • 500 314 699 07�... TC132.314... 008
• 500 314 699 0��... TC132F.314... 008• 500 314 699 0��... TC132UF.314... 008
TC132SicherheitsspitzeSafe EndExtrémité moussee• 08 Schneiden • Blades • Lames• �6 Schneiden • Blades • Lames• �0 Schneiden • Blades • Lames
d FG �00.000p 6
Shank L mm �,6 �,7Size ISO Order No. 009 0��
�/�0 mm US No. 790� 790�FG • 500 314 �95 07�... TC246.314... 009 0��
TC246Flamme • Flame • Flamme• �� Schneiden • Blades • Lames
d FG �00.000p 6
Shank L mm 5,�Size ISO Order No. 0��
�/�0 mmFG • 500 314 �96 07�... TC246L.314... 0��
TC246LFlamme lang • Flame longFlamme long• �� Schneiden • Blades • Lames
d FG �00.000p 6
Shank L mm �0,0Size ISO Order No. 0��
�/�0 mmFG • 500 314 �90 07�... TC284.314... 0��
TC284TorpedoParallel BevelCylindre à biseau• �� Schneiden • Blades • Lames
d FG �00.000p 6
Shank L mm �0,0Size ISO Order No. 0�8
�/�0 mmFG • 500 314 �99 07�... TC284K.314... 0�8
TC284KTorpedo konisch • CurettageConique à biseau• �� Schneiden • Blades • Lames
d FG �00.000p 6
Shank L mm 8,0Size ISO Order No. 0��
�/�0 mmFG • 500 314 �58 07�... TC297.314... 0��
TC297Zylinder Kante rundModified Round End CylinderCylindre bord rond• �0 Schneiden • Blades • Lames
d FG �00.000p 6
BURS, CUTTERS AND FG ADAPTORSPACK OF 5
£9.05
£10.68
£14.20
£12.95
£12.95
£12.95£10.68
£10.68 £10.68
£26.66£26.66£38.11£38.11£38.11£38.11
£10.68
£12.95£9.05
£12.95
£9.05
PACK OF 5
PACK OF 5
PACK OF 5
PACK OF 6
SKILLDENTA FRICTION GRIP DIAMONDS & BURS
BUY 3 GET 1 FREE!!!CHEAPEST ITEM FREE ON ALL DIAMONDS/BURS ON THIS PAGE
Call us today 01494 4484744|
Lab Essentials 8 Spring 2015
The industry standard. Non-clogging binder continuously exposes sharp new abrasive with absolute minimum of heat. Special metal bushing assures perfect centring, true-running and safety.
KOOLIES® - NO HEAT GRINDING WHEELS
GOLDIES
DED246SIZE 1 25 x 4.8mm
DED276SIZE 1 25 x 4.8mm
BOX OF 50
£19.07£19.07
DED250SIZE 5 22 x 3.1mm
DED280SIZE 5 22 x 3.1mm
BOX OF 50
£19.07
£19.07
DED251SIZE 6 22 x 2.4mm
DED266SIZE 6 22 x 2.4mm
£19.07 £35.79 £19.07
DED283 SIZE 8 19 x 3.1mm
£19.07
DED286 SIZE 11 15 x 3.1mm
£35.79
DED263 SIZE 3 22 x 2.4mm
BLACK Coarse (silicon carbide) - The traditional multi-purpose favourite GREEN Fine (silicon carbide) - The preferred choice for porcelain and enamel, leaves the smoothest surface and easiest to polish WHITE Fine (aluminium oxide) - Non contaminating for finishing non-precious and semi-precious metals
£19.07
DED247 SIZE 2 25 x 3.1mm
LONG-LASTING - TITANIUM NITRIDE COATINGPopular blade configurations Precision machined & balanced Colour-coded to ISO standards
FINE CROSS-CUT: [EF]Fine cross cut toothing design is ideal for fine cutting of metal, acrylic and stone. 2.35mm shanks.
VARIOUS [SPF], [FST], [GE], [SG]Customer favourite “Goldies” Spiral Fine Cross Cut, Fine Straight Blade Cross Cut, Bulk Cross Cut…
G079EF/040DED1622
G251EF/060DED1625
G351EF/040DED1629
G351SG/060 DED1671
EACH£23.85
EACH£23.05
G251GE/060 DED1651
EACH£23.05
G251FST/060 DED1635
EACH£23.05
G251SPF/060 DED1680
REGULAR CROSS-CUT: [E]Cross cut toothing design is ideal for rapid cutting of metal, acrylic and stone. 2.35mm shanks.
G079E/040DED1617
G079E/045DED1659
G137E/023DED1618
EACH£21.46
EACH£23.05
EACH£19.07
EACH£21.46
EACH£21.46
EACH£19.07
01494 448474 | [email protected] | www.skillbond.com
Open Monday to Friday 8.30am - 5.00pm. [Order online 24 hours]
Made in the USA
available in the UK
DedecoBrochureAW.indd 1
23/01/2014 12:22
FOR THE
FULL RANGE
SEE OUR
BROCHURE
|5 01494 448474 | [email protected] | www.skillbond.com
ALL LAB ESSENTIALS 8 PRICES EXCLUDE VAT & CARRIAGE, VALID UNTIL 15/05/2015. SUBJECT TO AVAILABILITY - E & OE. IMAGES ARE NOT TO SCALE
ULTRA DIA-STONE® - POINTS AND WHEELS
MANDRELS STAINLESS STEEL - 2.35mm SHANKS (unless stated otherwise)
4241HP Inverted ConeDED1867
4244HP CylinderDED1870
4247 16 x 3.5mm
HP Square-Edge
DED1873
4242HP TaperDED1868
4245HP RoundDED1871
4243HP Large CylinderDED1869
4246HP FlameDED1872
4248 22 x 2mm
HP Square-EdgeDED1874
EACH£29.81
EACH£29.81
EACH£29.81
EACH£29.81
EACH£29.81
EACH£29.81
EACH£34.09
EACH£34.09
ULTRA DIA-STONE Vitrified-bonded diamond-filled points & wheels designed for adjusting ceramics without risk of contamination. Also ideal for chip-free adjusting of ceramic margins and zirconia copings. Long-lasting.
4249 16 x 2mm
HP Knife-EdgeDED1875
4250 22.2mm
HP Knife-EdgeDED1876
EACH£34.09
EACH£34.09
HIPPIE
3mm PIN
HP 2mm PIN
SPIRAL DED892 = 3.8mm Shank
DED891 12/box £16.68
DED896 144/box £127.37
DED1118 1/unit £3.94
DED1119 12/box £34.20
DED774 1/unit £7.13
DED888 12/box £15.09
DED893 144/box £119.40
DED1116 1/unit £3.94
DED1117 12/box £34.20
DED890 12/box £11.11
DED895 144/box £78.79
DED892 6/box £8.72
STONE CHUCK6.3mm Shank
BUY 2 GET 1 FREE!!!CHEAPEST ITEM FREE ON ALL ULTRA DIA-STONE ON THIS PAGE
Call us today 01494 4484746|
Lab Essentials 8 Spring 2015
Material Ceramill Mikro
Ceramill Sintron CrCo Sinter Metal þCeramill Zolid Classic HT Zirconium Oxide þCeramill Zolid Preshades HT Zirconium Oxide, Stained þCeramill Zi Zirconium Oxide þCeramill Wax Milling Wax þCeramill PMMA Acrylic, Transparent þCeramill TEMP Acrylic, PMMA Stained þCeramill PEEK Polymer Acrylic þ3M™ ESPE™ Lava™ Ultimate Resin Nanoceramic þ
CERAMILL MIKROThe Ceramill Mikro is an extremely robust and compact 4-axis milling machine for dry milling blanks and single blocks of zirconia, wax, hybrid-ceramic or dry-millable composite materials.
The Ceramill Mikro provides laboratories with an easy entry into in-house CAD/CAM or optimises efficiency and productivity in routine everyday lab procedures.
Dimensions: D 410mm x W 410mm x H 540mm. Weight 50kg
DIGITAL SOLUTIONS
HIGH FREQUENCY SPINDLEExtremely robust and precise
TOOL PLACESWith automatic tool changer
BLANK HOLDERConverted with just a few manual steps
INTERIOR LIGHTINGFor visual control of milling
TOOL LENGTH MEASURERIncluding broken tool detection
PRESENCE SENSORFor milling tools
CONNECTION FOR EXTRACTION PROTECTS THE INTERNAL MECHANISM Optimal for use with the Ceramill Airstream, can also be used for central extraction
NEW!
FROM £18,500
+ VAT
SKILLBOND
FINANCE AVAILABLE*
CALL 01494 448474
*SUBJECT TO STATUS
|7 01494 448474 | [email protected] | www.skillbond.com
ALL LAB ESSENTIALS 8 PRICES EXCLUDE VAT & CARRIAGE, VALID UNTIL 15/05/2015. SUBJECT TO AVAILABILITY - E & OE. IMAGES ARE NOT TO SCALE
SGB1195 Giroform Drilling Unit £1,850.00
SGB513 Giroform Introductory Kit *SEE OFFER ABOVE!
SGB505 Giroform Pins x 1,000 pieces BUY 5 Get 1 FREE! £28.60
SGB506 Giroform Pins x 10,000 pieces BUY 5 Get 1 FREE! £239.00
SGB507 Giroform Putty 1kg £44.15
SGB508 Giroform Putty 5kg £162.22
GIROFORM
Giroform System
Pins
Giroform Putty
The Giroform System outsmarts the plaster expansion and is simple, fast and precise
SGB520 Giroform Secondary Plate with Magnet x 50 £171.82
SGB2514 Giroform Secondary Plate XL with Magnet x 50 £171.82
SGB1488 Giroform Quadrant Base Plate x 100 pieces £46.08
SGB1489 Giroform Adjustment Plate for Quadrant x 2 £8.92
SGB514 Giroform Premium+ Small x 100 pieces £86.29
SGB519 Giroform Premium+ Large x 100 pieces £95.02
SGB515 Giroform Classic Small x 100 pieces BUY 5 Get 1 FREE! £67.09
SGB518 Giroform Classic Large x 100 pieces BUY 5 Get 1 FREE! £75.63
Secondary Plates
Quadrant Plates
Base Plates
FREE!INTRODUCTORY KIT
WITH PURCHASE
OF SGB1195*
SGB193 Artex Facebow in Quickbite £548.54
SGB167 Artex Quickbite £34.76
ARTEX SYSTEMArtex BN - the Artex base model - the economic
entry into the Artex world of articulators
SGB1633 Artex BN OFFER £194.00
Artex CT - the non-arcon workhorse - the prosthetic articulator
SGB1482 Artex CT OFFER £483.00
Artex CN - the non-arcon carbon base model - the best selling carbon Artex - the entry to the world of Artex Carbon
SGB1462 Artex CN OFFER £312.00
Artex CP - the arcon base device
SGB1483 Artex CP OFFER £739.00
Artex CR - model management articulator and
universal diagnosis and therapy device
SGB1484 Artex CR OFFER £1,164.00
Call us today 01494 4484748|
Lab Essentials 8 Spring 2015
FOR CPD QUESTIONS ON THIS ARTICLE PLEASE VISIT
www.skillbond.com/cpd
Trim all unnecessary parts of the impression as low as possible ensuring stability, maintaining the dental arch.
Mould the Giroform putty on the impression carrier and then position the impression tray on a transversal rim with the tray handle on a cube sized 2 x 2 cm, to give stability to the tray.
Insert the dovetail of the clear adjustment plate (with split retention facing upwards) into the groove of the carrier and slide downwards. Press the impression tray into the putty. Ensure that the split retention faces upwards when positioning the adjustment plate whilst aligning the impression with the centre line to the occlusal plane.
By manipulating the putty rim and/or cube, the impression is aligned with the rear of the impression carrier. Tip: Place the clear adjustment plate with inserted pin on the aligned impression to check the height of the dental arch. The retention tip of the pin should not touch the impression (distance: approx. 3 mm).
Mark the saw cuts and drill holes for the pins on the impression material. Each removable segment requires 2 pins to avoid rotation. Tip: In cases of limited space use only 1 pin and cut a guidance groove into the plate. IMPORTANT: Consider all adjacent teeth as single segments as the expansion of a long span of adjacent teeth limits the approximal area.
NOTE: Heating of the blade facilitates trimming of extremely viscous polyether materials (Impregum, Permadyne, etc.).
Insert the base plate into the plate support from below. First, press the frontal groove of the base plate against the spring bolt; then locate the dovetail on the opposite side. Tighten the fixing screw by hand.
Position the carrier with the impression on the plate support.
Both metal pins on top of the plate support engage the two holes of the impression carrier.
Place the plate support with impression carrier onto the magnetic table.
Switch on the unit (a green control light is lit). Activate the laser by pressing either one of the buttons. Determine the drilling position by means of the laser beam. NOTE: The laser automatically shuts off 2.5 minutes after the unit was used last.
Pressing both triggers simultaneously automatically fixes the plate (magnetically) and starts the drilling process. Warning: The laser beam must be within the dimensions of the Giroform base plate. If the laser beam is observed to be outside the dental arch, i.e. in the area of the plate holder or of the retention disc, the drill could break.
1
STEP 1 AMANN GIRRBACH GIROFORM PROCESS
STEP 2
1
2
2
3
3
4
4
5
5
6
This learning session has been judged as being equivalent to
one hour verifiable CPD. To claim your verifiable CPD
hour you will need to go online to obtain the questions by visiting the following url: www.skillbond.com/cpd
follow instructions to submit your completed form.
Vincent Purkiss, Skillbond Educational and Technical Manager
|9 01494 448474 | [email protected] | www.skillbond.com
ALL LAB ESSENTIALS 8 PRICES EXCLUDE VAT & CARRIAGE, VALID UNTIL 15/05/2015. SUBJECT TO AVAILABILITY - E & OE. IMAGES ARE NOT TO SCALE
Hold the Giroform base plate, with split retention facing downwards, in your hand. Hold the pins at the retention tip, and push the tapered part into the drilled hole. Tip: push the pin into the base plate ‘firmly’ to ensue frictional fit.
IMPORTANT: Do not leave the model in the impression for longer than 35 minutes Otherwise irreversible dimensional deviations occur due to the diestone expansion, therefore, resulting in a high risk of breaking the dental arch.
Tip: Section the dental arch through the mid line and remove each half in turn to section more easily. The opposite side of the dental arch is then protected from any accidental damage during sectioning.
Position the Giroform base plate with pins, on the impression. Check the plate is flat on the putty. Disinfect the impression and spray a separating agent on the impression, then rinse. Mix your selected diestone according to the manufacturers instructions, under vacuum.
Place the tip of a plaster knife between the impression and the diestone.
The model is removed from the impression by twisting the blade.
Re-position the trimmed dental arch on the base plate without applying pressure. Between the dental arch and the base plate a gap of approx. 2 mm is visible as a result of the diestone expansion. The advantage is that you see the pins when sectioning.
Once sectioned as outlined earlier in the process, the linear expansion is removed; the segment is then easily and accurately placed onto the base plate.
As an alternative to dry trimming and for finishing purposes, a mounted arbor band - (grit 120) may be used in a micromotor.
Pour the diestone mix using a vibrator into the impression avoiding bubbles. When all teeth and the preparation area are completely covered, take the impression carrier from the vibrator and completely fill the impression.
Apply diestone around the pins‘ retention tips. Position the plate in the dovetail guidance and lower it into the diestone mix until the plate rests firmly on the putty. IMPORTANT: Do not apply diestone to the plate while the vibrator is on as the pins may become loose.
Remove the Giroform putty after approximately 30 minutes. Then, remove impression tray from the impression carrier.
Place the model flat in your hand with the split retention facing downwards, tap with a hammer on the rear of the plate until the dental arch is separated.
Then, preferably, dry trim the dental arch around the palatal and buccal areas.
Cover the centre screw hole with Giroform putty to protect it against excess diestone.
Clean all segments and reposition them firmly on the cleaned base plate.
1
1 2 3
6
11 12 13 14 15 16
STEP 3
2
7
3
8
4
9 10
5
STEP 4
EXCELLENCE THROUGH TRAINING
1 HOUR CPD!!!
Call us today 01494 44847410|
Lab Essentials 8 Spring 2015
THE RIGHT COURSE FOR YOU?
Digital training coming soon
Skillbond’s International Education CentreOver 30 courses for 2015!!! Find the right course for you at our brand new education centre. Call 01494 448474 or go to www.skillbond.com and click ‘courses’ or email [email protected]
A unique opportunity to try the dental industries most popular scanners and software, enabling you to make an informed and educated decision on what best suits your future digital investment
Myerson Flexible Materials
with Roy Davies
Amann Girrbach Ceramill System with Vincent Purkiss Merz Dental TiF Course
with Cueneyt Sefer
Noritake Advanced EX-3 Ceramics with Tatsuhiko Hirata
EXCEL
LENCE
THROUGH TRAIN
ING
Register your interest at [email protected]…
|11 01494 448474 | [email protected] | www.skillbond.com
ALL LAB ESSENTIALS 8 PRICES EXCLUDE VAT & CARRIAGE, VALID UNTIL 15/05/2015. SUBJECT TO AVAILABILITY - E & OE. IMAGES ARE NOT TO SCALE
TRADE IN YOUR OLD SCANNER AGAINST ANY 3Shape MODEL*
1ST QUARTER PROMOTION 2015
IMPLANT BAR MODULE
Worth £1,392.00FREE with the purchase of a D900L scanner.Yearly support fee of £214/year will apply after the first year
ABUTMENT DESIGNER
Worth £1,821.00FREE with the purchase of D900 or D900L scanner.Yearly support fee of £214/year will apply after the first year
*Subject to confirmation. Conditions: Order must be received no later than 31st March 2015. Standard terms and conditions apply. Cannot be combined with any other offers.
Buy a scanner and receive
Valid until 31st March 2015
FREE Software!!!
PLUS!
3Shape Scanner D-900/900L
The new 3Shape range launched at Chicago Midwinter Meeting 2015 will be coming soon…
3Shape Scanner D-800/810
3Shape Scanner D-700/710
3Shape Scanner D-500
SKILLBOND
FINANCE AVAILABLE*
CALL 01494 448474
*SUBJECT TO STATUS
Call us today 01494 44847412|
Lab Essentials 8 Spring 2015
SKILLBOND ACRYLICTRANSLUCENT VEINED 11kg Unique higher-impact strength acrylic. Flexibility in either quick, overnight or microwave curing. Low solubility and excellent finishing properties.
SKILLBOND ACRYLICLIGHT TRANSLUCENT VEINED 11kg Unique higher-impact strength acrylic. Flexibility in either quick, overnight or microwave curing. Low solubility and excellent finishing properties.
SKILLBOND ACRYLIC LAB PACKS Various 1kg Powder and 500ml Liquid combinations.
UNIVERSAL DENTURE LIQUID
SKILLBOND ACRYLICS
SKI850 Translucent Veined 11kg £120.00
SKI851 Repair Acrylic Trans Veined 1kg/500ml £52.50SKI852 Repair Acrylic Clear 1kg/500ml £52.50SKI854 Repair Acrylic Light Trans Veined 1kg/500ml £52.50
SGV001 Trial Size 10g Jar £12.85SGV003 45g Pack £45.00SGV004 170g Pack £140.00SGV006 Molloplast Cutter x 3 £22.78SGV007 Molloplast Pre-Polisher 10pcs + Mandrel £16.60SGV008 Primo Adhesive 15ml £15.77
SKI841 Universal Denture Liquid 2.5ltr £35.00SKI842 Universal Denture Liquid 1ltr £15.00SKI853 Light Translucent Veined 11kg £120.00
£120.0011KG FOR THEPRICE OF 10KG!
SKI850/SKI853+ LIQUID
LAB PACKS£52.50
DETAX MOLLOPLAST® BStays permanently soft. For indirect processing. One-component silicone, heat-curing, suitable for microwave with a wide range of indications.
Optimum bond on new or existing denture bases. Optimised consistency through innovative vacuum filling technology with plaque inhibitor, resistant against intraoral effects.
OFFER
OFFER
|13 01494 448474 | [email protected] | www.skillbond.com
ALL LAB ESSENTIALS 8 PRICES EXCLUDE VAT & CARRIAGE, VALID UNTIL 15/05/2015. SUBJECT TO AVAILABILITY - E & OE. IMAGES ARE NOT TO SCALE
Stoddard Lathe Brushes
Ideal Multi Layer Brushes Polistar Beige
Ideal 55mm Diameter Two Rows 12 pack
Ideal 80mm Diameter Two Rows 12 pack
Ideal 80mm Diameter Four Rows Felt Cloth 1 pack
Polistar Beige high shining polishing compound
Dentalfarm Shine Polishing Unit
SCI380 Shine £381.20SCI381 Splash guard for Shine £32.01
SSD006 3” Diameter £16.97 SSD013 4” Diameter £20.75 SSD081 40mm Diameter £15.84SSD022 63mm Diameter £6.48
SHA098 Ideal 55mm £23.50 SHA100 Ideal 80mm £31.22 SHA093 Ideal 80mm £4.26SHA378 Beige 100g £2.62SHA379 Beige 300g £5.27
SSD041 48mm Diameter £14.94 SSD001 3.25mm Diameter £11.34 SSD004 2” Diameter £9.99SSD091 80mm Diameter £18.72
Shine is a dual speed polishing lathe for grinding and polishing. Abrasive grinding wheels, brushes and felts can be inserted on the cone shaped spindles.
Excellent lathe brushes with Scotch Brite™ inserted between bristle rows for prepolishing of denture acrylic, veneer composites and precious metal alloy.
High shine polishing of acrylic dentures and composites.
10% OFFSTODDARD BRUSHES
20% OFFHATHO
Call us today 01494 44847414|
Lab Essentials 8 Spring 2015
VITA MFT® MULTI FUNCTIONAL TEETHThe perfect tooth for all circumstances
The tooth line VITA MFT combines functional with aesthetic characteristics and is available at reasonable prices. The VITA MFT design of occlusal surfaces is based on the innovative easy-centric principle, i.e. the surfaces are designed in such a way that, almost automatically, the perfect centric is reached.
ADVANTAGESThe vivid impression of the teeth promotes the natural appearance and results in the patient’s very rapid acceptance of the restoration.
DESCRIPTIONSlightly broadened tooth neck areas which reduce the effort for a true-to-nature and age-specific design of the interdentium. The ideal design of cusps of the upper posteriors brings about the correct centric and provides optimum chewing comfort to the patient. The reduced ridge lap allows for a significant reduction of grinding work and enlarges the surface for safe bonding to the denture base material.
VITA PHYSIODENS convince all who make high demands on aesthetics and function. Precise selection of shades, BIO-logical set-up and high-quality material will definitely ensure first-class results.
MATERIALThe VITA MRP (microfiller reinforced polyacrylic) material – proven over decades – which is used in VITA PHYSIODENS, is still unrivalled thanks to the lowest abrasion values of acrylic teeth.
SORTINGMore than 20 different upper anterior sets, suited to the superior premium technique, are available. They are divided into four mould groups with corresponding lower and posterior sets.
You put a lot of effort into improving the bond between acrylic teeth and the denture base: you clean the teeth, roughen them, add retention grooves and coat the denture base with monomer.
VITACOLL gives you even more assurance: the liquid bonding agent enables a permanent connection between the tooth and the denture base without any gaps, ensuring a reliable chemical bond between the acrylic teeth and heat-curing, cold-curing or self-curing polymers. In this way, VITACOLL reliably prevents teeth from breaking off from the denture base, even during repairs.
VITA PHYSIODENS Anteriors and Posteriors are available in VITA SYSTEM 3D-MASTER, BLEACHED shades and VITA classical A1-D4 (except B1) shades.
VITA PHYSIODENS® ACRYLIC TEETHNatural beauty
VITA VITACOLL® BONDING AGENTSimple to use – reliable results
EASY-CENTRIC® – THE NEW, EFFORTLESS WAY FOR SETTING UP DENTURES
The occlusal surface design of VITA MFT is based on the innovative principle called easy-centric which supports a professional and economical set-up procedure. Moreover, it leads to increased productivity in a quality well adapted to the patient’s needs.
ANTS£8.95 POSTS
ANTS£21.15
SET
POSTS£19.30
SET
CONSIGNMENT
DEAL ON MFT’S &
PHYSIODENS CALL
FOR DETAILS…
SVT266 VITA VITALCOLL® 100ml £18.85
|15 01494 448474 | [email protected] | www.skillbond.com
ALL LAB ESSENTIALS 8 PRICES EXCLUDE VAT & CARRIAGE, VALID UNTIL 15/05/2015. SUBJECT TO AVAILABILITY - E & OE. IMAGES ARE NOT TO SCALE
CONSIGNMENT
DEALS AVAILABLE
PLEASE CALL FOR
DETAILS…
9
PremEco® LineFurther system components
PremEco® Line set-up waxTemperature-resistant modeling wax for all work processes in thefield of prosthetics with high softening temperature and inconspi-cuous colouring for the wax try-in.
PremEco® Line alginate isolation solutionSuited for processing hot-curing and cold-curing polymers.
PremEco® Line precision gelHighly precise special duplicating gel on a hydrocolloid agar-agarbase for denture casting and the fabrication of model cast frames,easy processing in conventional duplicating devices.
PremEco® Line casting flaskRobust, distortion-free duplicating flask used with the acrylic casting technique to produce partial and full acrylic prosthetics,model cast prosthetics, double-crown and cover denture prosthetics, as well as for all types of bite splints.
Swiss JetAll-in-one flask
The Swiss Jet flask for the injection, injection pressing mouldingand casting method is an all-rounder. The corrosion resistant flasks,which close precisely due to the cone fit and which are designed forthe highest continuous stresses, are easy to handle and do not require any additional installations such as compressed air and aspecial water connection.
C
PremEco® LinePOURABLE DENTURE PROCESSING SYSTEM
With acrylics and techniques evolving in Prosthetics the PremEco Line is an innovative system moving with the times. Pourable systems help to create a cleaner working environment for technicians and reduce the working time spent on processing dentures. In recent years the disposal of gypsum has become an increased problem. By using a pourable system the laboratory is reducing its gypsum footprint and becoming more environmentally friendly. Merz Dental are providing a system that is user-friendly with great final results.
PremEco Line KIT OPTION 11 x PremEco line Casting flask 110mm 1 x 1kg Weropress Cold cure polymer 1 x 1ltr Weropress Cold cure monomer 1 x PremEco line Colourisation stains kit 1 x PremEco line Monomer 100ml 1 x PremEco line wax 120 sheets box 1 x PremEco line Alginate solution 1 x PremEco line precision gel 6.5kg 1 x PremEco line tooth sieve 1 x Large Acrylic Mixing Pot 70ml
SPECIAL PRICE £514.00
PremEco Line KIT OPTION 2As Option 1, with: 2 x PremEco Line Casting Flask 110mm
SPECIAL PRICE £658.00
PremEco Line KIT OPTION 3As Option 1, with: 4 x PremEco Line Casting Flask 110mm
SPECIAL PRICE £945.00
SMZ087 Set-Up Wax Rosa 5 95g £4.46
SMZ088 Set-Up Wax Rosa 22 500g £12.56
SMZ089 Set-Up Wax Rosa 120 2268g £53.96
SMZ090 Precision Gel 6kg £67.46
SMZ091 Alginate ISO Solution 1ltr £17.96
SMZ092 Pouring Flask dia 110mm £160.11
Weropress®
The all-rounder
5
Colour-stable and precision-fit cold-curing prosthetic acrylics of outstanding quality. Due to its unique polymer and monomer formulation it is suitable for all indications and processes within the injection, press and pouring method.
FEATURES and BENEFITS■ reliable and simple to measure powder-liquid system
■ suitable for the injection, press and pouring method
■ reliable, colour-stable storage and processing
■ high flexural strength tolerates large undercuts such as maxillarytuber during devesting
■ excellent polishing features
■ superior colour stability
■ colours are coordinated with all Merz Dental denture base materials
■ high plaque-resistance thanks to most modern PMMA-formulation
■ no late discolouring thanks to advanced catalyst system
■ biocompatibility tested
■ cadmium free
COLOURSpinkH-pinkclearL1 - pink veinedC34 - dark pink-opaque, veinedCS41 - pink-bluishpink veined - with red vinyl fibres
COLD-CURING POLYMERS
C
Weropress®
The all-rounder
5
Colour-stable and precision-fit cold-curing prosthetic acrylics of outstanding quality. Due to its unique polymer and monomer formulation it is suitable for all indications and processes within the injection, press and pouring method.
FEATURES and BENEFITS■ reliable and simple to measure powder-liquid system
■ suitable for the injection, press and pouring method
■ reliable, colour-stable storage and processing
■ high flexural strength tolerates large undercuts such as maxillarytuber during devesting
■ excellent polishing features
■ superior colour stability
■ colours are coordinated with all Merz Dental denture base materials
■ high plaque-resistance thanks to most modern PMMA-formulation
■ no late discolouring thanks to advanced catalyst system
■ biocompatibility tested
■ cadmium free
COLOURSpinkH-pinkclearL1 - pink veinedC34 - dark pink-opaque, veinedCS41 - pink-bluishpink veined - with red vinyl fibres
COLD-CURING POLYMERS
C
The next generation artegral is the adaptation to contemporary needs with added value for the modern user. Aesthetic and function of matured kind. In constructive dialogue with users, the artegral anterior was designed closest to nature, new moulds developed leaving prosthetics newly interpreted.
THE POSTERIORContemporary removable prosthetics require intelligent materials. They should resist abrasion, without provoking potentially damaging hyperbalances and their consequences. On the other hand, they must be fracture-proof to guarantee a long wearing life in tertiary structures.
• Fully anatomical, cusp angle 25°
• Full bodied like a natural tooth
• Clear centric for natural and artificial antagonists
• Time-saving handling: basal shaped, integrated set-up aid Preventive Shift Groove® (PSG®)
SHADESAvailable in all 16 Classic Vita Shades A1 – D4 and BL1 – BL4
THE ANTERIOR• new, additional anterior moulds:
BO, BI and IT
• perfect light-refraction
• life-like layers
• 19 upper and 10 lower anterior moulds
• ideal for hybrid and implant constructions as well as for full and partial prosthetics
• plaque-resistant, made of Organic Modified Polymer-Network (OMP-N®)
• Perfect light refraction
• Lively looking layers
• Ideal for hybrid and implant constructions
• Plaque resistant, made of Organic Modified Polymer-Network® (OMP-N®)
ANTERIOR & POSTERIOR TEETH
POSTS£14.23
SETS
ANTS£15.76
SETS
8 The Valley Centre Gordon Road High Wycombe Bucks HP13 6EQ UK
Tel +44 (0)1494 448474Fax +44 (0)1494 430924
VITA V60 i-LINECeramic furnace operated by a simple touch screen and which can be kept operational 24/7. Automatic control of temperature and vacuum. Lift action. Renowned Vita Silica quartz firing muffle for best firing results. Adjustable pre-drying and slow cooling of the lift position. Fast cooling for to stand by temperature. Sturdy and reliable, this is real 24/7 ‘work horse’ which can adapt to changes in irregular current surges.
Modern and ergonomic design. Plug in and Use. German Quality at its best.
Multimat® Easy The Multimat® Easy is the new generation in the Multimat® line. This is a completely new development in electronic control and design while maintaining our proven hardware such as the muffle or the servomotors. The Multimat® Easy compact shape makes the furnace ideal for use in smaller labs, clinic labs or as an extra or backup furnace.
Laboratory Essentials Spring 2015
VPAD EXCELLENCE
£3,699 INC PUMP+VAT
SVT1231
V60 i-LINE
£2,999 INC PUMP+VAT
SVT1232+SVT1233
MULTIMAT EASY
£2,499 INC PUMP+VAT
SDP909
FURNACES FOR ALL LABS
VITA VPAD EXCELLENCEThanks to a large 8.5 inch colour touch screen and many extras, the exclusive control unit offers an especially convenient and intuitive operation for up to 4 firing units of the VITA New Generation.
The integrated 2 GB photo viewer is equipped with useful image processing functions and enables a convenient editing and clear administration of patient photos directly at the workplace.
High-quality electronics guarantee the safe control of program flows.
SKILLBOND
FINANCE AVAILABLE*
CALL 01494 448474
*SUBJECT TO STATUS