SKD series SKD series Split Case Split Case

Centrifugal Pumps Centrifugal Pumps Issue 1Issue 1

Applications & FeaturesApplications & Features

• All waterways and impellers are designed for maximum efficiencies using the latest CFD design techniques.

• With 6 pump sizes, each available with a range of impeller sizes. • Impellers can be made from cast iron, bronze or 316 stainless steel. • All pumps can be fitted with stuffing boxes and gland seals or

alternatively with a variety of mechanical seals. • Double volute design for low vibration, shaft flex elimination and

balanced internal forces for a long service life.

2

• Smaller models can operate to 3500 rpm. • Heavy duty construction with casing pressures up to 25 bar. • Can be supplied and fitted with a range of electric motors and start/

stop panels & pump control systems on painted or galvanised bases. • Can also be supplied and fitted with a range of diesel engines

complete with start/stop panels & pump control systems on painted or galvanised pump bases with built in diesel fuel tanks.

• All construction is undertaken in our Adelaide workshop.

• Finsbury Powamac are distributors for the SAER’s range of SKD series split case centrifugal pumps. The SKD units are medium pressure, large volume, industrial centrifugal pumps. Designed and manufactured in Italy by Saer Elettropompe, one of Europe’s leading pump manufacturers, to meet the tough requirements of agricultural, commercial, mining and industrial clients.

• The pumps are guaranteed to perform and have tolerances to the latest UNI EN ISO 9906 standards (Appendix A,

level 1 on request). European quality at Australian prices. • The pump full range has six inlet and discharge sizes from DN125mm to DN500mm. • All pump are available with grease lubricated or oil lubricated bearings on request. • The pumps are of the axial split casing variety, allowing for easy maintenance on the rotation elements and pump

internals without the need to remove the pump pipework, driving unit or main pump body. • With flow rates to 4900m3/hr and heads to 180m, these pumps can transfer clean liquids up to 1200C. • The SKD series pumps are not self priming however external priming solutions can be offered for these pumps if

required. • These versatile heavy duty pumps are ideal for a range of commercial and industrial uses including:

Water/liquid transfer: For the industrial and municipal transfer of clean liquids requiring high volumes at medium heads. Also ideal for recirculating plants and air conditioning systems. Emergency services: Reliable pump for large volume fire fighting systems. Agriculture: Ideal for pumping large quantities of water for irrigation schemes.

Pump specificationsPump specifications

SKD Pumps — Bare shaft specification

Part number

Inlet size mm

Outlet size mm

Impeller size mm

@1450rpm @2900rpm Flow m3/hr

Head m

Drive power kW

Flow m3/hr

Head m

Drive power kW

SKD 125-250 125 125 250 150 ~ 300 18 ~ 12 15 300 ~ 600 75 ~ 50 110

SKD 125-270 125 125 270 150 ~ 300 26 ~ 18 22 300 ~ 700 100 ~ 65 200

SKD 125-335 125 125 335 150 ~ 300 38 ~ 26 37 300 ~ 600 140 ~ 110 250

SKD 125-375 125 125 375 150 ~ 320 50 ~ 38 45 300 ~ 600 160 ~ 130 355

SKD 125-425 125 125 425 150 ~ 350 65 ~ 44 75

SKD 150-295 200 150 295 250 ~ 500 24 ~ 16 30 600 ~ 1000 100 ~ 60 250

SKD 150-320 200 150 320 250 ~ 500 40 ~ 24 45 600 ~ 1100 130 ~ 90 400

SKD 150-395 200 150 395 300 ~ 500 55 ~ 40 75 SKD 150-440 200 150 440 300 ~ 520 65 ~ 50 110

SKD 150-500 200 150 500 300 ~ 550 85 ~ 65 160

SKD 200-345 250 200 345 450 ~ 820 32 ~ 22 75

SKD 200-465 250 200 465 400 ~ 820 75 ~ 65 160

SKD 200-520 250 200 520 400~ 850 95 ~ 75 250

SKD 200-590 250 200 590 400 ~ 950 125 ~ 90 315

SKD 250-410 300 250 410 700 ~ 1400 45 ~ 30 160

SKD 250-550 300 250 550 600 ~ 1350 105 ~ 75 355

SKD 250-615 300 250 615 800 ~1400 130 ~ 100 500

SKD 250-700 300 250 700 800 ~ 1550 170 ~ 130 800

SKD 300-485 350 300 485 1300 ~ 2300 65 ~ 45 315

SKD 300-650 350 300 650 1300 ~ 2200 140 ~ 100 800

SKD 300-730 350 300 730 1300 ~ 2300 180 ~ 140 1200

Pump operating range

3

@590rpm @980rpm SKD 500-550 500 500 550 3000 ~ 4900 12 ~ 5 160 2500 ~ 4800 36 ~ 20 400

SKD125-1450rpm

SKD150-1450rpm

SKD200-1450rpm

SKD250-1450rpm

SKD300-1450rpm

SKD125-2900rpm

SKD150-2900rpm

Note: Larger SKD 500 pump is not shown

Engineered for purposeEngineered for purpose

• A large number of standard pump engine or motor configurations are available for quick delivery including skids with built in diesel tanks and other painted or galvanised support bases.

• All pumps, engines or motors can be supplied with pump controls, safety features and start/stop panels. • Our engineering department uses the latest CAD/CAM design and engineering methods to design and manufacture a

system for your requirements. Engineered constructions are our speciality. • Performance testing, pump and valve maintenance or overhauls can also be offered for all pump sets. • External priming systems can be supplied and fitted to all engine and motor pump systems where required. • Pipe, hose, valves, strainers and pipe fittings can also be designed and supplied where required for a one stop shop

for all your needs. • No job too large or too small. • For further technical and performance details on these pumps, refer to Finsbury Powamac Tech Data sheets CEN-19.

Material specifications / options

Item Material Casing Cast Iron

Balanced impeller Cast iron

Bronze

316 Stainless Steel

431 Stainless Steel

Duplex Stainless Steel

Stuffing box Gland packing

Mechanical seal

Silica—Silica

Tungsten carbide

Shaft

OR