Embed Size (px)
Citation preview
Product Information
DD
-0756
www.kason.com
KASON CORPORATION 67-71 East Willow St.Millburn, NJ 07041-1416 USATel: 973-467-8140 Fax: 973-258-9533E-mail: [email protected]
KASON CORPORATION, EUROPEUnits 12 & 13 Park Hall Business VillagePark Hall Road Longton, Stoke-on-TrentStaffordshireST3 5XATel: 01782-597540 Fax: 01782-597549E-mail: [email protected]
SEPARATOR ENGINEERING LTD.4119 Cousens St.Saint LaurentQuebec CANADA H4S 1V6 Toll Free (Canada only):877-694-4441Tel: 514-667-6777 Fax: 514-745-2074E-mail: [email protected]
Size/Density Separator
Rice shown (clockwise from top left) as 1)mixture of on-size grains, undersizegrains, and chaff, 2) on-size grains, 3)undersize grains, and 4) low bulk densitychaff as separated by screen vibration andairflow.
Size/Density SeparatorRemoves Undersize and Underweight Materialsfrom Grains, Plastics, Glass, Wood Particles
This Kason Vibro-Air™ Size/Density Separator employs vibratory screening toremove undersize particles, and airflow to simultaneously remove low bulkdensity materials.
It efficiently separates: fines and chaff from grain products; fines, angel hair,strands and film scrap from plastic pellets/regrind; labels from recycled glass;fibers, saw dust and wood flour from wood chips/shavings; and otherundersize and low bulk density matter from on-size products.
Material fed through a port on the unit's hood cascades over a series ofstrategically placed internal trays, and ultimately onto a vibrating, fine meshscreen that moves on-size material in controlled flow patterns toward andthrough a discharge port at the screen's periphery. Heavier fines and a portionof the lighter fines pass through the screen onto a chute leading to a lowerdischarge spout.
Simultaneously, air drawn into the base of the air-tight chamber flows upward,drawing the balance of low density fines, along with airborne dust, fibers, filmsand strands, into an airstream that increases in velocity (as the hood tapers)before venting to a cyclone and/or dust collector.
The combination of air flow and vibration removes a greater portion of finesand low density materials from on-size particles with higher efficiency thanpossible with screening alone.
Optional is a coarse screening deck positioned above the fine mesh screen toscalp oversize particles from on-size material.
The separator is available in 24 to 100 in. (610 to 2540 mm) diameters, incarbon steel or stainless steel, and is offered as a stand-alone unit or acomplete system integrated with a dust collection system, exhaust fan andelectrical controls on a mobile frame, ready to plug in and run.
The screening assembly is suspended on springs that allow it to vibrate freelywhile minimizing power consumption and preventing vibration transmission tothe floor. Beneath the assembly is an imbalanced-weight, gyratory motor thatcreates multi-plane inertial vibration for the purpose of controlling the flowpath of material on screen surfaces and maximizing the rate at which materialpasses through the screen.
Options:• "Air-Lift" Quick Screen Change System• Clean-In-Place (CIP) Design, Construction and Finish• Ball Tray Anti-Blinding Device• Kleen Screen Anti-Blinding Device• Auto-Lube Automatic Lubrication System for gyratory motors• Design, Construction and Finish to FDA, 3-A, BISSC, EEC and other sanitarystandards
Plastics shown (clockwise from top left) as1) mixture of on-size pellets, undersizepowder and low bulk density film, 2)on-size pellets, 3) low bulk density film,and 4) undersize powder as separated byscreen vibration and airflow.
Wood shown (clockwise from top) as 1)mixture of undersize chips and powder, 2)low bulk density powder, and 3) on-sizechips as separated by screen vibration andairflow.
