Upload
others
View
110
Download
10
Embed Size (px)
Citation preview
SITRAIN: Digital
Industry Training
AcademySouth Africa
siemens.com/SITRAIN© Siemens 2019
© Siemens 20XX
5/22/2020Page 2
Training Portfolio Overview
Standardized Product-
Related Training
Consulting
and E-learning
Customer-Tailored
TrainingTraining Equipment
Based on products and
systems of Sector Industry
Focus on hands on training
Based on customer specific
applications and locations
Oriented on different target groups
Skills Gap Audits –
Competence development
E-learning offering
Worldwide trainer certification
and qualification standards
Based on products and
systems of Sector Industry
Designed for optimized
learning support
© Siemens 20XX
5/22/2020Page 3
SITRAIN Digital Industry offers you learning paths, courses
and certified degrees on the following topics:
1 Industrial Automation
Systems SIMATIC
2 Industrial
Communications
3 Operator Control and Monitoring
Systems SIMATIC HMI
4 Digital Enterprise
5 Drive Technology
SINAMICS
6 Motion Control
7 Process Instrumentation
8 Process Control Systems SIMATIC
PCS 7 and SIMATIC PCS neo
© Siemens 20XX
5/22/2020Page 4
Industrial
Automation
Systems
SIMATIC
1
SIMATIC S7-1500, TIA Portal,
SIMATIC S7-300/-400, SIMATIC S7-1200
© Siemens 20XX
5/22/2020Page 5
Latest Automation Systems
TIA-Portal Software & 1200/1500 PLC’s
© Siemens 20XX
5/22/2020Page 6
Latest Automation Systems
TIA-Portal Software & 1500 PLC
© Siemens 20XX
5/22/2020Page 7
Trainings for SIMATIC S7-1500 in the TIA Portal
Level 1
Service Training Programming Training Programming Languages
SIMATIC programming 1 in the TIA Portal TIA-PRO1
SIMATIC programming
with S7-Graph in the TIA PortalTIA-GRAPH
SIMATIC programming 1
with S7-SCL in the TIA PortalTIA-SCL1
Level 2
Level 3
SIMATIC programming 2 in the TIA Portal TIA-PRO2
SIMATIC programing 2
with S7-SCL in the TIA PortalTIA-SCL2
Siemens Certified PLC Programmer TIA-PRO3
Certification courses
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
SIMATIC service 1 in the TIA Portal TIA-SERV1
SIMATIC service 2 in the TIA Portal TIA-SERV2
Siemens Certified Service Technician
Level 2 in TIA PortalTIA-SERV3
Beginners Introduction to PLC ST-PLCINTRO Introduction to PLC ST-PLCINTRO✓ ✓
✓ ✓
✓ ✓
✓ ✓
Courses offered
in South Africa✓
© Siemens 20XX
5/22/2020Page 8
Latest Automation Systems
TIA-Portal Networking
© Siemens 20XX
5/22/2020Page 9
Trainings for SIMATIC S7-1500 in the TIA Portal
Level 1
Communication
SIMATIC programming 1 in the TIA Portal TIA-PRO1
Level 2
Level 3
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
PROFINET with Industrial Ethernet
in the TIA PortalIK-TIAPN
OPC UA – Basics and Configuration IK-OPCUA1
✓
✓
Courses offered
in South Africa✓
© Siemens 20XX
5/22/2020Page 10
Latest Automation Systems
TIA-WinCC (Operator Panels & SCADA)
© Siemens 20XX
5/22/2020Page 11
Trainings for SIMATIC S7-1500 in the TIA Portal
Level 1
Operate and Monitoring
Level 2
Level 3
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
SIMATIC WinCC SCADA
in the TIA PortalTIA-WCCS
SIMATIC WinCC on the machine level
in the TIA PortalTIA-WCCM
SIMATIC WinCC on the machine level
in the TIA Portal system course 2TIA-WCCM2
✓
✓
Courses offered
in South Africa✓
© Siemens 20XX
5/22/2020Page 12
Latest Automation Systems
TIA-Portal Motion Control
© Siemens 20XX
5/22/2020Page 13
Trainings for SIMATIC S7-1500 in the TIA Portal
Level 1
Motion Control
SIMATIC Motion Control 1
in the TIA PortalTIA-MC1
Level 2
Level 3
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
SIMATIC Motion Control 2
in the TIA PortalTIA-MC2
✓
✓
Courses offered
in South Africa✓
© Siemens 20XX
5/22/2020Page 14
Classic Automation Systems
STEP 7 Software & 300/400 PLC’s
© Siemens 20XX
5/22/2020Page 15
Trainings for SIMATIC S7-300/-400 STEP 7 V5.x
Level 1
Level 2
Level 3
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
Service Training Programming Training Programming Languages
SIMATIC Service 1 in STEP 7 ST-7SERV1 SIMATIC programming 1 in STEP 7 ST-7PRO1
SIMATIC Service 2 in STEP 7 ST-7SERV2 SIMATIC programming 2 in STEP 7 ST-7PRO2
SIMATIC S7
Programming with SCLST-7SCL
SIMATIC S7
Sequence Control with S7-GraphST-7GRAPH
SIMATIC S7
Graphical Programming with CFCST-7CFC
Siemens Certified Service Technician
Level 2ST-SERV3 Siemens Certified Programmer ST-PRO3
Beginners Introduction to PLC ST-PLCINTRO Introduction to PLC ST-PLCINTRO
✓ ✓
✓ ✓
✓ ✓
✓
✓ ✓
Certification coursesCourses offered
in South Africa✓
© Siemens 20XX
5/22/2020Page 16
Trainings for SIMATIC S7-300/-400 STEP 7 V5.x
Level 1
Level 2
Level 3
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
PROFINET
System CourseST-ETHERPR SIMATIC WinCC flexible
System Course 1ST-WINCCFLEX
Communication Operate and Monitoring Safety
SIMATIC programming 2 in Classic STEP7 ST-7PRO2
SIMATIC WinCC
System CourseST-WINCC
PROFIBUS
System CourseST-PRIFIBU
SIMATIC WinCC flexible
System Course 2ST-WINCCFLEXADV
Programming of safety related SIMATIC S7
controller via Distributed SafetyST-PPDS
Beginners Introduction to
Profibus, Profinet and EthernetSCT-S7NETSIA
Actuator Sensor
Interface CourseIK-ASISYS
✓
✓
✓
✓
✓
✓
✓
✓
✓
Courses offered
in South Africa✓
© Siemens 20XX
5/22/2020Page 17
Specialized Training
Fault Finding and Diagnostics
© Siemens 20XX
5/22/2020Page 18
Trainings focusing on faultfinding and diagnostics
Level 1
Level 2
Level 3
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
STE7 Troubleshooting and Diagnostics ST-7TROUBLE TIA Troubleshooting and Diagnostics TIA-TRB
STEP 7 (300/400 CPU’s) TIA Portal (1200/1500 CPU’s)
SIMATIC Classic STEP7ST-7PRO1/
ST-7SERV2
Beginners
✓
✓ ✓
Courses offered
in South Africa✓
TIA PortalTIA-PRO1/
TIA-SERV2✓
© Siemens 20XX
5/22/2020Page 19
Latest Automation Systems
TIA-Portal Software & 1200 PLC (Micro Automation)
© Siemens 20XX
5/22/2020Page 20
Trainings for SIMATIC S7-1200
Level 1
Level 2
Programmers, commissioning engineer,
maintenance personnel, operators
SIMATIC S7-1200
Basic CourseTIA-MICRO1
SIMATIC S7-1200
Advanced CourseTIA-MICRO2
✓
✓
Courses offered
in South Africa✓
© Siemens 20XX
5/22/2020Page 21
Industrial
Communication
2
PROFINET, PROFIBUS, Industrial Ethernet,
OPC and Industrial Remote Communication
© Siemens 20XX
5/22/2020Page 22
Trainings for Industrial Communication
PROFINET PROFIBUS ASI
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
PROFINET with Industrial Ethernet
in TIA PortalTIA-PN
Beginners
Level 1
PROFINET
System Course for STEP7ST-ETHERPR
Level 2 PROFIBUS
System Course for STEP7ST-PROFIBU
Actuator Sensor
Interface CourseIK-ASISYS
Introduction to
Profibus, Profinet and EthernetSCT-S7NETSIA
✓
✓
✓
✓
✓
Courses offered
in South Africa✓
© Siemens 20XX
5/22/2020Page 23
Certified Profibus International Courses
PROFINET PROFIBUS
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
Certified Engineer CPN-ENG
Certified Installer CPN-INS
Certified Installer with Troubleshooting CPI-INT
Certified Installer CPI-INSLevel 1
Level 2
Certified Installer with Engineer CPI-INE
✓
✓
✓
✓
✓
Certification coursesCourses offered
in South Africa✓
© Siemens 20XX
5/22/2020Page 24
Operator Control
and Monitoring
Systems
SIMATIC HMI
3
SIMATIC WinCC in the TIA Portal,
SIMATIC WinCC V7.x
© Siemens 20XX
5/22/2020Page 25
Trainings for Operator Control and Monitoring Systems
SIMATIC HMI (Operator Panels and SCADA)
Level 1
SIMATIC
WinCC V7.x
SIMATIC WinCC in the TIA Portal –
Machine level
SIMATIC WinCC in the TIA Portal –
SCADA
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
SIMATIC WinCC
System CourseST-BWINCCS
SIMATIC WinCC on the machine level in the
TIA Portal System Course 2TIA-WCCM2
SIMATIC WinCC on the machine level in the
TIA PortalTIA-WCCM SIMATIC WinCC SCADA
in the TIA PortalTIA-WCCS
SiVArc – Options of Automatic Visualization
GenerationTIA-SIVARC
Level 2
SIMATIC programming 1
in the TIA PortalTIA-PRO1
SIMATIC programming 1
in the TIA PortalTIA-PRO1SIMATIC programming 1 in STEP 7 ST-7PRO1
✓
✓
✓
✓
✓
✓
✓
Courses offered
in South Africa✓
© Siemens 20XX
5/22/2020Page 26
Digital Enterprise
4
© Siemens 20XX
5/22/2020Page 27
Digital Enterprise
TIA in the DE
© Siemens 20XX
5/22/2020Page 28
Trainings for the Digital Enterprise
Level 1
Trainings for Totally Integrated
Automation in the Digital Enterprise
Totally Integrated Automation
in the Digital Enterprise – Basics
Totally Integrated Automation in the
Digital Enterprise – Code Generation
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
TIA in the DE –
Introduction CompactDI-INTROC
OPC UA –
Basics and ConfigurationIK-OPCUA1
Basics of Industrial Security
In the factory automationST-SECFA1
TIA in the DE –
Introduction to StandardizationDI-STAND
SIMATIC programming 1
in the TIA PortalTIA-PRO1
TIA Portal Openness
Programming 1DI-OPEN1
TIA in the DE – Automatic execution
of engineering tasksDI-AUTOEN
TIA Portal Openness
Programming 2DI-OPEN2
SIMATIC programming 2
in the TIA PortalTIA-PRO2Level 2
✓ ✓
✓
✓
✓
Courses offered
in South Africa✓
© Siemens 20XX
5/22/2020Page 29
Totally Integrated Automation in the Digital
Enterprise – Virtual Commissioning
Totally Integrated Automation in the Digital
Enterprise – Specialization CoursesDigitalization in the Process Automation
Trainings for the Digital Enterprise
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
SIMATIC PCS 7
System CourseST-PCS7SYS
SIMATIC programming 2
in the TIA PortalTIA-PRO2
TIA in the DE – Virtual Commissioning
for MachinesDI-VIRTCOM
SIMATIC PCS 7 Integrated
Engineering and SimulationST-PCS7INS
Energy management
with SIMATIC Energy SuiteTIA-EMES
SiVArc – Options of Automatic Visualization
GenerationTIA-SIVARC SIMIT in Process Automation ST-PCS7SIM
PROFINET and H-Systems in the
Process AutomationST-PCS7PNH
SIMATIC PCS 7 Plant Automation
Accelerator Workshop for beginnersST-PCS7PAA
SIMIT in Discrete Automation Technology
for BeginnersDI-SIMITFA
Level 1
Level 2
✓
✓
✓ ✓
Courses offered
in South Africa✓
© Siemens 20XX
5/22/2020Page 30
Drive Technology
SINAMICS
5Low Voltage Converter
SINAMICS G120, SINAMICS S120
SINAMICS G130 / G150 / S150
SINAMICS DCM
SINAMICS Medium Voltage Converter
SIMOTICS Motors
© Siemens 20XX
5/22/2020Page 31
Drives & Switchgear
SINAMICS G120
© Siemens 20XX
5/22/2020Page 32
Trainings for SINAMICS G120
Basics
Planners, decision makers
and sales personnel
Commissioning engineer,
programmers
Service personnel,
maintenance personnel
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
Introduction to Drives DR-DRV-FUN
SINAMICS G120 – Parameterizing
and CommissioningDR-G12-PM
SINAMICS G120 – Parameterizing
and CommissioningDR-G12-PM
SINAMICS G120 – Parameterizing
AdvancedDR-G12-PA
Level 1
Level 2
Introduction to Drives DR-DRV-FUN Introduction to Drives DR-DRV-FUN
Courses offered
in South Africa✓
✓ ✓ ✓
✓ ✓
✓
© Siemens 20XX
5/22/2020Page 33
Drives & Switchgear
SINAMICS S120
© Siemens 20XX
5/22/2020Page 34
Trainings for SINAMICS S120
Basics
Planners, decision makers
and sales personnel
Commissioning engineer,
programmers
Service personnel,
maintenance personnel
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows
SIMOTICS Motion Control Motors –
Planning and EngineeringDR-MCM-PL
SINAMICS S120 –
Planning and EngineeringDR-S12-PL
SINAMICS S120 – Parameterizing
and Commissioning in the TIA PortalDR-S12-PMT
SINAMICS S120 –
Diagnostics and ServiceDR-S12-DG
SIMOGEAR Geared Motors –
Planning and EngineeringDR-SGM-PL
SINAMICS S120 –
Parametrieren Safety IntegratedDR-S12-SAF
SINAMICS S120 –
Parameterizing AdvancedDR-S12-PA
Level 1
Level 2
SINAMICS S120 – Parameterizing
and CommissioningDR-S12-PM
SINAMICS S120 –
Parameterizing Safety IntegratedDR-S12-SAF
SINAMICS S120 – Upgrade to TIA Portal
and StartdriveDR-S12-UP
SINAMICS S120 –
Parameterizing and OptimizationDR-S12-OPT
SINAMICS S120 – Diagnostics at Chassis-
and Cabinet UnitsDR-S12-CHA
SINAMICS S120 – Diagnostics
PROFINET and PROFIBUSDR-S12-NET
Introduction to Drives DR-DRV-FUN Introduction to Drives DR-DRV-FUN Introduction to Drives DR-DRV-FUN
Courses offered
in South Africa✓
✓
✓
✓
✓
✓
✓
✓
✓
© Siemens 20XX
5/22/2020Page 35
Drives & Switchgear
SINAMICS G150 / G130 / S150
© Siemens 20XX
5/22/2020Page 36
Trainings for SINAMICS G150 / G130 / S150
Basics
Service personnel,
maintenance personnel
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
SINAMICS G150 / G130 / S150 –
Diagnostics and ServiceDR-G15-DGLevel 1
Introduction to Drives DR-DRV-FUN
Courses offered
in South Africa✓
✓
✓
© Siemens 20XX
5/22/2020Page 37
Drives & Switchgear
SINAMICS DCM
© Siemens 20XX
5/22/2020Page 38
Trainings for SINAMICS DCM
Basics
Service personnel,
maintenance personnel
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
SINAMICS DCM –
Diagnostics and ServiceDR-DCM-DGLevel 1
Level 2 SINAMICS DCM –
Parameterizing AdvancedDR-DCM-PA
Introduction to Drives DR-DRV-FUN
Courses offered
in South Africa✓
✓
✓
© Siemens 20XX
5/22/2020Page 39
Drives & Switchgear
SIMOCODE PRO V
© Siemens 20XX
5/22/2020Page 40
Trainings for SIMOCODE PRO V
Basics
Service personnel,
maintenance personnel
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
SIMOCODE PRO V–
Commissioning and DiagnosticsSD-SIMOPROLevel 1
Level 2
Introduction to Drives DR-DRV-FUN
Courses offered
in South Africa✓
✓
✓
© Siemens 20XX
5/22/2020Page 41
Drives & Switchgear
SINAMICS Medium Voltage Converter
© Siemens 20XX
5/22/2020Page 42
Trainings for SINAMICS Medium Voltage Converter
Basics
Service personnel,
maintenance personnel
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
SINAMICS Perfect Harmony GH150 –
Diagnostics and ServiceDR-GH15-DGLevel 1
SINAMICS Perfect Harmony GH180 –
Diagnostics and ServiceDR-GH18-DG
SINAMICS GL150 –
Diagnostics and ServiceDR-GL15-DG
SINAMICS GM150 –
Diagnostics and ServiceDR-GM15-DG
SINAMICS SL150 –
Diagnostics and ServiceDR-SL15-DG
SINAMICS SM150 –
Diagnostics and ServiceDR-SM15-DG
Introduction to Drives DR-DRV-FUN
Courses offered
in South Africa✓
✓
✓
© Siemens 20XX
5/22/2020Page 43
Motion Control
6
© Siemens 20XX
5/22/2020Page 44
Latest Automation Systems
Motion Control
© Siemens 20XX
5/22/2020Page 45
Trainings for Motion Control
SIMOTION
Level 1
Commissioning engineer,
programmers
Service personnel,
maintenance personnel
SIMOTION –
Programming AdvancedMC-SMO-PA
SIMOTION –
Programming and CommissioningMC-SMO-PM
SIMOTION und SINAMICS S120 –
Diagnostic and ServiceMC-SMO-DG
Level 2
Courses offered
in South Africa✓
✓
✓
✓
© Siemens 20XX
5/22/2020Page 46
Trainings for Motion Control
SIMATIC TIA Portal
Level 1
Commissioning engineer,
programmers
SIMATIC – Motion Control 2
in the TIA PortalTIA-MC2
SIMATIC programming 1
in the TIA PortalTIA-PRO1
Level 2
SIMATIC – Motion Control 1
in the TIA PortalTIA-MC1
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
Courses offered
in South Africa✓
✓
✓
✓
© Siemens 20XX
5/22/2020Page 47
Process
Instrumentation
Courses
7
© Siemens 20XX
5/22/2020Page 48
Trainings for Process Instrumentation
Level 1
Instrumentation Tech’s & Maintenance
Flow Instruments PI-FLOW
Fundamentals of Process Instrumentation PI-FUN
Pressure, Temperature and Positioners PI-PTP
Level 2
Basics
Level Instruments PI-LVL
Weighing Instruments PI-WNG
✓
✓
✓
✓
✓
Courses offered
in South Africa✓
© Siemens 20XX
5/22/2020Page 49
Process Control
Systems
SIMATIC PCS 7
SIMATIC PCS neo
8
SIMATIC PCS 7, SIMATIC PCS neo
© Siemens 20XX
5/22/2020Page 50
Latest Automation Systems
PCS7
© Siemens 20XX
5/22/2020Page 51
Trainings for SIMATIC PCS 7
Level 1
Planning and Engineering Extensions and Technology Service
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
Siemens SIMATIC PCS 7
Basic EngineerCP-PCS7-1
SIMATIC PCS 7
System CourseST-PCS7SYS
SIMATIC PCS 7
AS-EngineeringST-PCS7ASE
SIMATIC PCS 7
OS-EngineeringST-PCS7OSE
SIMATIC PCS 7
Service 1ST-PCS7SR
Introduction of the technologic libraries
in SIMATIC PCS 7ST-PCS7LIB
PCS 7
Batch CourseST-PCS7BAT
Siemens Certified
SIMATIC PCS 7 EngineerCP-PCS7-2
Level 2
✓
✓
✓
✓
✓
Certification coursesCourses offered
in South Africa✓
© Siemens 20XX
5/22/2020Page 52
Safety
Trainings for SIMATIC PCS 7
Level 1
Digital Enterprise for the
Process Automation
The contents of a course in a field with coloured
background are recommended requirements
for attending the courses connected by arrows.
SIMATIC PCS 7
System CourseST-PCS7SYS
SIMATIC PCS 7
Process SafetyST-PCS7SAF
SIMIT in Process Automation ST-PCS7SIM
SIMATIC PCS 7 Plant Automation
Accelerator Workshop for beginnersST-PCS7PAA
SIMATIC PCS 7 – Integrated
Engineering and SimulationST-PCS7INS
Level 2
PROFINET and H-Systems
in the Process AutomationST-PCS7PNH
✓
Courses offered
in South Africa✓
© Siemens 20XX
5/22/2020Page 53
Trainings for SIMATIC PCS neo
Level 1
Future of the Process Automation
SIMATIC PCS neo
System Training for PCS 7 EngineersNEO-SYSUP
SIMATIC PCS neo
System Training for BeginnersNEO-BASIC
Level 2
Courses offered
in South Africa✓
© Siemens 20XX
5/22/2020Page 54
SITRAIN – Training for Industry
Thank you for your attention!
We‘ll help you!
All product related info: 0860 80 80 80
Training information:
Tel: 011 652 3206
Or... on the Internet - Online booking
https://new.siemens.com/za/en/product-
services/services/industry/sitrain/sitrain-personal.html