Site Steel Product Catalog 2009 - steelheadmetals.comsteelheadmetals.com/docs/catalog/SIte Steel Product Catalog_Low Res... · Monopoles Lattice & Guyed Tower Rooftop/Wall Mounts

Monopoles

Lattice & Guyed Tower

Rooftop/Wall Mounts

Coax Support & Protection

Equipment Platforms

Site Steel Product Catalog 2009

3958 Boone Rd SE Salem, OR 97317

PO BOX 3850 – Salem OR 97302

Local: 503-763-0114 – Toll Free: 877-900-6789 – Fax: 503-763-6280

www.steelheadmetals.com

March 5, 2010

Following are the general specifications we follow in the design and production of steel structures, antenna mounts, etc. Should you have any questions regarding these specifi-cations, or our capabilities please feel free to call.

1. Products are designed to meet the wind loading requirements of TIA/EIA-222-F, ANSI/TIA-222-G, IBC and UBC as required.

2. Products are fabricated per the requirements of the AISC Manual of Steel Construction.

3. Products are welded per the requirements of the AISC Manual of Steel Construction and the American Welding Society D1.1 Structural Welding Code.

4. Steel products are hot-dip galvanized in accordance with ASTM A123. 5. Steel products are fabricated from certified ASTM Materials. 6. Hardware is either SAE Gr. 5 or ASTM A325 and is Galvanized per the

requirements of ASTM A153 or ASTM B695. 7. All welders are certified to AWS standards. 8. AWS Certified Welding Inspector on staff. 9. ICC, OBOA, City of Portland, and City of Corvallis Certified Inspector on

Staff. 10. PE Certifications available for all 50 States. 11. Fabrication Shop is:

- AISC CERTIFIED - CITY OF L.A. TYPE 1 APPROVED FABRICATOR - COUNTY OF SAN BERNARDINO APPROVED FABRICATOR

Thank You,

Jesse Jaramillo Design & Engineering Manager 503-763-0114 [email protected]

http://www.steelheadmetals.com/

Universal Monopole Pole Clamp (3 Sector) ....................................................................................... Light Duty Universal Monopole Pole Clamp (3 Sector) ..................................................................... Universal Monopole Pole Clamp (4 Sector) …………........................................................................ Universal Monopole Pole Clamp (2 Sector) ....................................................................................... Universal Monopole Standoff and Cross Arm ………………..…...……............................................... T-Arm Kit for Monopoles ..……..……………..……….......................................................................... Slim Line Mounts for Round & Polygon Poles …….............…............................................................ 5’ Curved Standoff for Cross Arm ………..………....……..........…….................................................. Dual Antenna Chain Mount ..…………………….............……..…….................................................... Chain Mounts for Round or Polygon Poles ........................................................................................ Single Sector Chain Mount ................................................................................................................ Standoff Pipe Mount ........................................................................................................................... Chain Mount for GPS/E911 Mount ..................................................................................................... Monopole Platform with Hatch ........................................................................................................... Rotatable Monopole Platform ............................................................................................................. Low Profile Monopole Platform w/ 12’ Face ....................................................................................... Slim Line 4 Sector Platform for Monopole .......................................................................................... 4 Sector Platform with 10’ Face ......................................................................................................... 12’ Round Platform ............................................................................................................................

1 1 2 2 3 3 4 5 5 6 7 7 7 8 8 9 9 10 10

11 12 12 13 13 13 14 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22 23 23 24 24 25 25

Lattic Guyed Lattice & Guyed Tower 111--25

Monopoles 1-1010

Tower Leg Pipe Mounts ..................................................................................................................... Tower Leg Clamp Kits ........................................................................................................................ Sloped Tower Leg Clamp Kits ............................................................................................................ Universal Standoff Pipe Mounts ......................................................................................................... Single Antenna Standoff .................................................................................................................... Tower T-Arm Standoff Adapter .......................................................................................................... 12” Standoff ........................................................................................................................................ Pipe to Pipe Adapter .......................................................................................................................... 4’ - 6’ Adjustable Standoff Mount ....................................................................................................... Ice Shields for Microwave Dish .......................................................................................................... Face Mounted Pipe Mount Kit ............................................................................................................ Face Mounted Standoff Frame .......................................................................................................... Handrail Antenna Mounts ................................................................................................................... Standoff Pipe Mount with adjustable Slope ........................................................................................ Light Duty Standoff Pipe Mount ......................................................................................................... Standoff Pipe Mount for Horizontal Angle .......................................................................................... Stabilizing Rod Kit .............................................................................................................................. Telescoping Pipe Mount ..................................................................................................................... GPS/E911 Antenna Mounts ............................................................................................................... Tower Antenna Frame ....................................................................................................................... 12’ Antenna Frame with 4’ Standoff Taper Adjustment Kit ................................................................ Standoff Frame .................................................................................................................................. Universal Standoff Frames ................................................................................................................. Wireless Frames to attach to Vertical Pipe ........................................................................................ Wireless Frames to attach to Vertical Pipe with Slope Adjustment .................................................... Slim Line Wireless Frame .................................................................................................................. 4 Sector Rotatable Tower Platform .................................................................................................... 3 Sector Rotatable Platforms ............................................................................................................. Co-Locate Platform for Lattice Tower ................................................................................................ Low Profile Platform ........................................................................................................................... 12’ Round Platform ............................................................................................................................

Mount Rooftop/Wall Mount 2626--3838

Support Pr Coax Support & Protection 39-45

Non-Penetrating Rooftop Frames ….......................................................................................................... Non-Penetrating Tripod Base …................................................................................................................. Tripod for Wireless Mounts ….................................................................................................................... Small Non-Penetrating Roof Mounts …...................................................................................................... Non-Penetrating Sloped Roof Mount …..................................................................................................... Tri-Sector Adapter ….................................................................................................................................. Tri-Sector Rooftop Frames …..................................................................................................................... Tri-Sector Non Penetrating Rooftop Frame …........................................................................................... Single / Multi-Sector Rooftop Mounts …..................................................................................................... Water Tank Antenna Support Frame …..................................................................................................... Water Tank Mounts …................................................................................................................................ Wall Mount and Wall Mount Kits …............................................................................................................ Parapet Wall Mount …................................................................................................................................ Slider Brackets …....................................................................................................................................... Wall Mount Kits …...................................................................................................................................... Corner Wall Mounts …............................................................................................................................... 3’ Standoff Wall Mount …........................................................................................................................... Custom Antenna Frame with RFP Support …............................................................................................ Rooftop Bridge Kits …................................................................................................................................ Straight Splice / 45° Splice …..................................................................................................................... PVC Sleepers …......................................................................................................................................... Rooftop Hood Entry …................................................................................................................................ Plain End Pipe Galvanized ….....................................................................................................................

26 26 27 28 29 29 30 31 31 32 32 33 34 34 35 35 36 36 37 37 38 38

Coax Ladder ...................................................................................................................................... Coax Wall Covers .............................................................................................................................. Climbing Ladder Coax Support Bracket ............................................................................................ Monopole Coax Support Bracket & Cover ......................................................................................... Universal Snap-In Bracket ................................................................................................................. Trapeze Kit ........................................................................................................................................ Cluster Support Brackets ................................................................................................................... Mini Cluster Block .............................................................................................................................. Universal Round Member .................................................................................................................. Ice Bridge / Grip strut Extensions ...................................................................................................... Bridge Kits ......................................................................................................................................... Bridge Kit Components ...................................................................................................................... X Brace for Bridge Kits ...................................................................................................................... Stabilizer Kit for Pipe Column ............................................................................................................

39 39 40 40 41 41 41 42 42 42 43 44 45 45

Equipment Rack ................................................................................................................................ Telco-PPC Rack for Platform ............................................................................................................ 10’ x 16’ Equipment Platform ............................................................................................................. 12’ x 20’ Equipment Platform ............................................................................................................. 10’ x 15’ Modular Platform ................................................................................................................. Equipment Platform with 4 Jacks ...................................................................................................... Adjustable Equipment Platform and Attachments ............................................................................. Micro Cell Vault ................................................................................................................................. 8’ x 10’ Utility Vault ............................................................................................................................ Custom Platforms ..............................................................................................................................

latf ms Racks Equipment Platforms & Racks 4646--5151

46 46 47 47 48 48 49 50 50 51

SITE STEEL FOR THE WIRELESS INDUSTRY

NOPOLESMONOPOLESMONOPOLES

Local 503-763-0114 Toll Free 877-900-6789 Fax 503-763-6280

3958 Boone Rd. SE Salem, Or. 97317 - P.O. Box 3850 Salem, Or. 97302

www.steelheadmetals.com

Part Description List Price

Part Description List Price

1

Universal Monopole Pole Clamp (3 Sector) for Round & Polygon Poles - Can accommodate flush mounted 2⅜” OD - 4½” pipe with separately ordered U-Bolts

SHPC1236 12” to 36” OD $1525.00 SHPC3660 36” to 60” OD $1865.00

SH10335 12” to 36” OD $1500.00 SH10339 36” to 60” OD $1800.00

Light Duty Universal Monopole Pole Clamp (3 Sector) for Round & Polygon Poles - Mounting Pipes ordered separately - These two kits include U-Bolt Mounting Hardware for 2 ⅜” OD Pipe

MONOPOLESMONOPOLES



www.steelheadmetals.com SITE STEEL FOR THE WIRELESS INDUSTRY

Part Description

Part Description

2

Universal Monopole Pole Clamp (4 Sector) for Round & Polygon Poles - 2⅜” - 4½” OD Pipes can be directly mounted to Clamp for flush mount - Mounting Pipes and U-Bolts ordered separately

SH10196 12” to 36” dia. SH13291 36” to 60” dia.

Universal Monopole Pole Clamp (2 Sector) for Round & Polygon Poles - 2⅜” thru 4½” OD Pipes can be directly mounted to Clamp for flush mount - Mounting Pipes and U-Bolts ordered separately

SH10310 12” - 18” dia. SH10311 18” - 24” dia. SH10313 24” - 30” dia. SH10314 30” - 36” dia.

P LESMONOPOLESMONOPOLES




Part Description

Part Description

Part Description

3

SH10567-9 36” Standoff w/ 13’ Cross Arm & (9) 72” Pipes




SH10567-X 36” Standoff w/ 13’ Cross Arm & No Pipes SH10567-L 36” Standoff w/ 13’ Cross Arm & (12) 96” Pipes

for 36”-60” Pole Clamp SHPC3660





SH11740-X 60” Standoff w/ 10’ Cross Arm & No Pipes

SH11740-L 60” Standoff w/ 10’ Cross Arm & (12) 96” Pipes

for 36”-60” Pole Clamp SHPC3660

T-Arm Kit for Monopoles - Includes Pole Clamp, Standoff & Cross Arm

- 12” - 36” Pole Clamp Included unless noted

Universal Monopole Standoff and Cross Arm - Standoff Arms include “Stop Sign”, (8) U-Bolts, and 4 Mounting Bolts

SHSTA10 10” Standoff SHSTA12 12” Standoff SHSTA24 24” Standoff SHSTA30 30” Standoff SHSTA36 36” Standoff SHSTA48 48” Standoff SHSTA60 60” Standoff

SHCA-5 5’ Cross Arm SHCA-8 8’ Cross Arm SHCA-10 10’ Cross Arm SHCA-13 13’ Cross Arm

SHSTA Standoff

SHCA Cross Arm

Shaded Area Included in Kit

MONOPOLESMONOPOLES




Part Description

Part Description

4

SH13884 6 Antenna Capacity SH10172 9 Antenna Capacity

Slim Line Mount for Round & Polygon Poles - Arms have 0 - 30° Down Tilt Capability - Kit includes (3) Arms, all Mounting Hardware, and 12” - 36” Pole Clamp - 2 ⅜” OD Mounting Pipes ordered separately

Slim Line Mount for Round & Polygon Poles - Kit includes (3) Arms, all Mounting Hardware, and Pole Clamp - 2⅜” OD Mounting Pipes ordered separately

SH14870 12” - 36” dia SH15278 36” - 60” dia

SH13884 SH10172 Shown

4 ft.

4 ft

MONOPOLESMONOPOLES




Part Description

Part Description

5

5’ Curved Standoff for Cross Arm - Kit includes SHCAMP Cross-over Plate,

Cross-arm U-Bolts, and Mounting Hardware - Pole Clamp ordered separately - Cross-arm ordered separately

SH10405 5’ Standoff

Dual Antenna Chain Mount with 48” Standoff - Fits 5” to 36” Poles - Kit includes Mounting Hardware and U-Bolts for (6) 2⅜” OD Pipe - Mounting Pipes ordered separately

SH10400 3-Arm Standoff SH10399 Single-Arm Standoff


MONOPOLESMONOPOLES




Part Description

Part Description

6

Chain Mount for Round or Polygon Poles with 18” Standoff - Kit includes U-Bolts for mounting 2⅜” - 4½” Pipe - Mounting Pipes ordered separately

SH12591A 3-Sector Mount SH12591B 4-Sector Mount

Chain Mount for Round or Polygon Poles - Includes Hardware for 4½” and 2⅜” OD Pipe - Mounting Pipes ordered separately

SHCM1 Single-Sector Mount fits 4½” - 40” OD SHCM2 2-Sector Mount fits 4½” - 44” OD SHCM3 3-Sector Mount fits 8⅝” - 50” OD SHCM4 4-Sector Mount fits 14” - 55” OD

MONOPOLESMONOPOLES




Part Description

Part Description

Part Description

7

Single Sector Chain Mount for bolt-on Pipe Mount - Flanged Pipe Mount ordered separately

SH13253 Universal Mount fits 4½” - 40” OD

24” Standoff with 5’ Pipe Mount - Also available in Lattice/Guyed Tower - Hardware not included

SH10199 2⅜” OD x 5’ SH10016-2 4½” OD x 5’

SH15053 GPS/E911

Chain Mount for GPS/E911 - Fits 4½” thru 40” pipe


2⅜” OD x 12”

MONOPOLESMONOPOLES




Part Description

Part Description

8

Monopole Platform with Hatch - Easy-installation welded design - Kit includes Pole Clamp and 12 Cross-over Plates for 2⅜” OD Mounting Pipes - Has pass-through hatch - Mounting Pipes ordered separately

SH10062 Fits 12” - 36” OD Poles SH10043 Fits 36” - 60” OD Poles SH10062-H Handrail Kit

Rotatable Monopole Platform - Easy 3-piece installation - Kit includes Pole Clamp and 12 Cross-over Plates for 2⅜” OD Mounting Pipes - Rotatable on Pole w/out loosening Pole Clamp - Mounting Pipes ordered separately

SH10223 Fits 12” - 36” OD Poles SH10224 Fits 36” - 60” OD Poles SH10062-H Handrail Kit

12’ antenna center to center max

MONOPOLESMONOPOLES




Part Description

Part Description

9

Low-Profile Monopole Platform with 12’ Face - Kit includes Pole Clamp, (12) Cross-over Plates, and U-Bolts - Handrail Kit ordered separately - Mounting Pipes ordered separately

SH1096 Fits 12” - 36” OD Pole SH1096-L Fits 36” - 60” OD Pole SH1096-HR Handrail Kit

Slim Line 4 Sector Platform for Monopole - Includes Pole Clamp, and Cross-over Hardware for up to (16) Mounting Pipes - Mounting Pipes ordered separately

SH15232 10’ Face / Fits 12” - 36” OD Pole SH15232-L 10’ Face / Fits 36” - 60” OD Pole SH13573 12’ Face / Fits 12” - 36” OD Pole SH13573-L 12’ Face / Fits 36” - 60” OD Pole

12’ antenna center to center max

36” OD Pole 60” OD Pole

10’ or 12’ face

MONOPOLESMONOPOLES




Part Description

Part Description

10

4 Sector Platform with Hatch

- Includes Cross-over Hardware for up to (16) Mounting Pipes - Mounting Pipes ordered separately

SH13954 Fits 12”- 36” OD Pole SH13954-L Fits 36”- 60” OD Pole

12’ Round Platform for Monopole - 12”- 36” Pole Clamp included - Kit includes (12) 2⅜” OD x 84” Mounting Pipes

SH11620 12’ Round Co-Locate Platform

10’ Face

LATTICE & GUYED TOWERA U D RLATTICE & GUYED TOWER




Part Description

Part Description

11

Universal Tower Leg Pipe Mounts - For Microwave Dishes and Antenna Frames - Fits round or angle Tower Legs 1.9” OD - 7½” OD Pipe Angle 2½” - 8” (3-leg) Angle 2½” - 6” (4-leg)

- Accommodate for Slope (0-20°)

SHUPM60 Pipe Mount with 4½” x 60” OD Pipe SHUPM272 Pipe Mount with 2⅜” x 72” OD Pipe SHUPM266 Pipe Mount with 2⅜” x 66” OD Pipe

Tower Leg Pipe Mounts - 5’ Pipe Mounts with welded Mounting Tabs - Flanged Pipe Mount

SH965 Vertical 4½” OD Pipe Mount SH967 4½” OD Pipe Mount for 16:1 Slope SH968 4½” OD Pipe Mount for 12:1 Slope SH1161 Vertical 2⅜” OD Pipe Mount



(4) 11/16” holes with 2 mounting patterns 1.) 4” center to center 2.) 6” center to center

5’ pipe mount

LATTICE & GUYED TOWERLATTICE & GUYED TOWER




Part Description

Part Description

12

Tower Leg Clamp Kit - Fits 1.9” - 7½” OD Pipe Angle 2½” - 8” (3-leg) Angle 2½” - 6” (4-leg)

SH10047 Fits 2”- 8⅝” OD Pipe or 2½” - 6” Angle SH10098 Fits 2”- 14” OD Pipe or 2½” - 10” Angle (4-leg) 2½” - 14” Angle (3-leg)

Sloped Tower Leg Pipe Mount Adapter Kit - Includes U-Bolt Hardware for 4½” OD Pipe - Mounting Pipe ordered separately - Adjusts up to 5° with 3ft clamp spacing - Use with Clamp Leg Kits above

SH10098-A Slope Adjustment Plate

Shaded Area Included In Kit




ATTICE GUYED LATTICE & GUYED TOWERLATTICE & GUYED TOWER




Part Description

Part Description

Part Description

13

Universal Standoff Pipe Mount for Vertical Legs

SH1738 2’ Standoff SH1739 3’ Standoff SH10016-2 4½”OD x 5’

Single Antenna Standoff - Fits 1.9” - 7½” OD Pipe Angle 2½” - 6” (3-leg) Angle 2½” - 6” (4-leg) - Kit includes all installation Hardware - Adjustable for 9:1, 12:1, 16:1 Slopes - 2⅜” OD Pipe ordered separately

SH10468 2’ Standoff SH10832 3’ Standoff

Tower T-Arm Standoff Adapter - Fits 2⅞” OD - 4½” OD Tower Leg - Includes installation Hardware


SH1738 / 9 SH10016-2

LATTICE & GUYED TOWER LATTICE & GUYED TOWER




Part Description

Part Description

Part Description

14

12” Light Duty Standoff - Pipe to Pipe Adapter ordered separately

SH11219 12” Standoff

4’ to 6’ Adjustable Standoff Mount - Fits 1.9”- 7½” Pipe - Angle 2½” - 8” (3-leg) - Angle 2½” - 6” (4-leg) - Kit includes Stabilizing Rod - 2⅜” - 3½” Mounting Pipe ordered separately

SH10257 Adjustable from 4’- 6’

SH10013 Adapter for 1”- 3½” OD Pipe to 2⅜”- 5” OD Pipe SH11890 Adapter for (2) 1”- 3½” OD Pipes SH11891 Adapter for (2) 2⅜”- 5” OD Pipes SH11893 Adapter for 1”- 3½” OD Pipe to 4”- 9” OD Pipe

Light Duty Pipe to Pipe Adapter

SH11893 Shown

Pipe to Pipe Adapter


2⅜” OD x 44”

2⅜” OD x 66”





Part Description

Part Description

15

Part Description

Ice Shields for Microwave or Panel Antennas

SH11053 2’ Ice Shield SH10800 4’ Ice Shield SH11135 6’ Ice Shield SH13232 8’ Ice Shield

Face Mounted Pipe Mount Kit - Includes 4½” OD x 60” Pipe Mount

SH11774A Face Mounted Standoff Pipe for 3’ wide Tower Face with legs up to 2⅞” OD SH11774B Face Mounted Standoff Pipe for up to 10’ wide Tower Face with legs up to 6⅝” OD

SH10406 Ice Shield for Antenna

Dish Antenna - Attaches to 4½” Pipe Mount or Tower leg - Includes 200’ of Cable and Hardware

Whips / Panel Antenna

- Area of protection: 2’ x 2’ - Clamps to 1.90” - 7½” Pipe Angle 2” - 8” (3 and 4 leg)

2’





Part Description

Part Description

16

Face Mounted Standoff Frame

- Kit includes (2) Stabilizing Rods, and Pipe Mount Plates for (4) Antennas - 2⅜” Mounting Pipes ordered separately - Fits 1.9” - 8” OD Pipe Angle 2½” - 8” (3 leg) Angle 3” - 6” (4 leg) - 12’ max antenna spacing

SH12227 Standoff Frame

Handrail Antenna Mounts - Fits 1” - 5” OD round Handrails 2” - 3” angle Handrails - Kit includes all Mounting Hardware - 2⅜” Mounting Pipes ordered separately

SH10675 For Round Member SH10676 For Angle Member

SH10675 SH10676


2’ Standoff





Part Description

Part Description

17

Standoff Pipe Mount with Adjustable Slope - Fits 1.90 - 7” OD Pipe Angle 2½” - 8” (3 leg) Angle 2½” - 6” (4 leg)

- Adjust for Slope (0-20°)

- Mounting Pipes attached - Stabilizing Rod included

SH10341 2’ Standoff w/ 4½” x 5’ mtg. Pipe SH10120-3 3’ Standoff w/ 2⅜” mtg. Pipe SH10120-4 4’ Standoff w/ 2⅜” mtg. Pipe SH10059 6’ Standoff w/ 2⅜” mtg. pipe

Light Duty Standoff Pipe Mount - Fits all Pipe up to 6” OD Angle up to 4” (4-leg) Angle up to 5” (3-leg) - 1.90 OD x 30” Mounting Pipe attached - Includes Leg Clamp Hardware

SH11240 2’ Standoff SH11886 3’ Standoff SH11887 4’ Standoff SH10461 6’ Standoff





Part Description

Part Description

18

Standoff Pipe Mount that Mounts to Horizontal Angle

- Fits Angle Girts from 3”x3” to 6”x6” - 2⅜” OD x 7’ Mounting Pipe attached


Stabilizing Rod Kit w/ Rod Support Bracket - 1.9” OD x 10’ Pipe - Rod Support Bracket clamps to 1” OD - 5” OD Pipe or 2” - 3” Angle

SH10021 Stabilizing Rod Kit w/ Rod Support Bracket

Stabilizing Rod Kit SH10021

Rod Support Bracket


SH10021 Stabilizing Rod Kit included with SH11024 only

½” Bolt will attach to Tower or Rod Support Bracket





Part Description

Part Description

Part Description

19

“SUPER-FLY” Tower Antenna Frame - 10’ Fast set frame includes crossovers for 2⅜” OD mounting pipes - Clamps to: 1.9” OD—7-1/2” OD Pipe, 2-1/2” x 2-1/2” - 6” x 6” (4) leg angle, 2-1/2” x 2-1/2” - - 8” x 8” (3) leg angle - Adjusts up to 30° side to side each direction - Leg slope adjustment up to 5° - Stabilizing rods included (10’ long) - Mounting pipes ordered separately

SH14274 Super-Fly Adj. Frame

GPS/E911 Antenna Mounts - Mounting Pipe size 1.90” OD - Mounting Angle size 2” - Banding and Clips ordered separately

SH10296 48” Standoff

SH15125 12” Standoff SH15126 24” Standoff

- Fits 1.9” - 3½” OD pipe - U-Bolts included

⅝” hole

⅝” hole

Adjustable-A-Tilt +- 10°

Ready To Ship

Fast Deployment





Part Description

Part Description

20

Tower Antenna Frame - 10’ Frame includes 3 crossover kits for 2⅜” OD mounting pipes - 13’ & 15’ Frame includes 4 crossover kits for 2⅜” OD mounting pipes - Mounting pipes ordered separately - Stabilizing rod included

SH14276 8’ Face SH14275 10’ Face SH10275 15’ Face

12’ Antenna Frame with 4’ Standoff Taper Adjustment Kit

SH11763 Tower Face Span Kit (Shaded area) Kit includes: - (2) 3” OD x 12’6” Pipe - (2) 3” x 3” Cross-over Plates - All leg mounting Hardware SH11761 12’ Antenna Frame with 4’ Standoff Kit includes: - (1) SH11763 - (2) 10’ Stabilizing Rods - Cross-over Plates for (4) Antennas 4’ Standoff 12’ Antenna Frame

Universal Mounting Bracket Fits 1.9” - 7½” OD Pipe Angle 2½” - 8” (3-leg) Angle 2½” - 6” (4-leg)

Slope Adjustment Bracket

2’ Standoff

SH11763 Max fit is 12’ wide tower





Part Description

Part Description

21

Universal Standoff Frame - Fits 1.9” - 7½” OD Pipe Angle 2½” - 8” (3-leg) Angle 2½” - 6” (4-leg) - Stabilizing Rod Included - 10’ Frame includes 3 Cross-over Kits for 2⅜” OD Mounting Pipes - 12’ Frame includes 4 Cross-over Kits for 2⅜” OD Mounting Pipes - Mounting Pipes ordered separately

Standoff Frame - Frame will rotate horizontally +/- 50° - Frame will adjust between Vertical and 7° of Leg Slope - Fits 1.9” - 7½” OD Pipe Angle 2½” - 8” (3-leg) Angle 2½” - 8” (4-leg) - Designed for (3) or (4) Antenna configuration - Mounting Pipes ordered separately

SH12288 Standoff Frame with 10’ Face SH14871 Standoff Frame with 12’ Face

SH14873 8’ Face SH10382 10’ Face SH10402 12’ Face SH14872 15’ Face

*NOTE: +- 50° for Vertical Tower Legs - 2.7° Leg Slope Frame rotation decreases from +- 50° to +- 10° as Leg Slope increases from 2.7° - 7°

Frame pivots +- 30°





Part Description

Part Description

22

Wireless Frame to attach to Vertical Pipe - 10’ Frame includes 3 Cross-over Kits for 2⅜” OD Mounting Pipes - 12’ Frame includes 4 Cross-over Kits for 2⅜” OD Mounting Pipes - Includes Hardware to attach to 2⅜” - 4½” OD Tower Legs - Stabilizing Rod included - Mounting Pipes ordered separately

SHWF10 10’ Face SHWF12 12’ Face

Wireless Frame with Slope Adjustment - 10’ Frame includes 3 Cross-over Kits for 2⅜” OD Mounting Pipes - 13’ Frame includes 4 Cross-over Kits for 2⅜” OD Mounting Pipes - Includes Hardware to attach to 2⅜” - 4½” OD Tower Legs - Stabilizing Rod included - Mounting Pipes ordered separately

SH10032 3 Pipes/10’ Face SH10033 4 Pipes/13’ Face

Slope Adjustment: From vertical to 6° Leg-Slope





Part Description

Part Description

23

Slim Line Wireless Frame - All Frames include 4 Cross-over Kits for 2⅜” OD Mounting Pipes - Includes Hardware to attach to 4½” OD Tower Legs only - Stabilizing Rod included with 10’ Frame - (2) Stabilizing Rods included with 12’ and 15’ Frames - Mounting Pipes ordered separately

SH10563 10’ Frame SH10564 12’ Frame SH10574 15’ Frame SH216-H Saddle w/ Hardware

4 Sector Rotatable Tower Platform with 12’ Frame - Interface designed for top-of-tower - Includes (9) Cross-over Kits for Mounting Pipes - Mounting Pipes ordered separately

SH11303 4 Sector Rotatable Platform

12’





Part Description

Part Description

24

3 Sector Rotatable Tower Platform with 12’ Frame - Interface designed for top-of-tower - (9) Cross-over Plates included for Mounting Pipes - Mounting Pipes ordered separately

SH10364 3 Sector Rotatable Platform

Co-Locate Platform for Lattice Tower with 15’ Frame - Adjusts to fit Vertical to 6° Leg-Slope

- Fits 1.9” - 7½” OD Pipe Angle 2½” - 8” (3-leg) Angle 2½” - 6” (4-leg) - Fits Tower Face widths from 5’ - 8’9” - Includes (12) Cross-over Plates for Mounting Pipes - Mounting Pipes ordered separately

SH10420 Co-Locate Platform

12’

15’





Part Description

Part Description

25

Low Profile Platform for Lattice Tower with 15’ Frame - Fits 1.9” - 7½” OD Pipe Angle 2½” - 8” (3-leg) Angle 2½” - 6” (4-leg) - Fits Tower Face widths from 30” - 60” - Adjusts to fit Vertical to 6° Leg-Slope - Includes (12) Cross-over Kits for Mounting Pipe - Mounting Pipes ordered separately

SH15155 Low Profile Platform

12’ Round Platform for Guyed Tower - Fits 1¼” - 2⅞” OD Pipe Angle up to 2½” (3-leg) - Fits Tower Face widths 34” - 44” - Includes (9) Cross-over Kits for Mounting Pipe - Mounting Pipe ordered separately

SH11829 12’ Round Platform

UNTS ROOFTOP/WALL MOUNTS ROOFTOP/WALL MOUNTS




Part Description

Part Description

26

SHNPF7 7’ Face SHNPF10 10’ Face SHNPF12 12’ Face

Non-Penetrating Tripod Base - Includes Collars to fit 2⅜” - 4½” OD Pipe Masts - Pipe Mast ordered separately - Blocks ordered separately - Rubber Mats ordered separately

SHBTF-K2K4 Non Penetrating Tripod Base

Non-Penetrating Rooftop Frames - Designed for 3 or 4 Antenna configuration

- Includes U-Bolt Hardware

- Blocks ordered separately - Rubber Mats ordered separately - Mounting Pipes ordered separately

8’ 7’

Face Width

7’ 3”

Wireless Structures □ Self Support Towers □ Tapered Monopoles □ Pipe Poles

Call the experts at Steelhead for a free quote on all your Steel Applications !

Local: 503-763-0114 Fax: 503-763-6280

or Toll Free: 877-900-6789

For Hardware and Accessories look to Steelhead’s new H & A Catalog!

Utilities □ Sub-Station Steel □ Transmission Towers □ Transmission Poles

D.O.T.

□ Sign Bridges □ VMS Poles and Bridges □ Break-away Sign Supports

Commercial □ Structural Steel □ Support Posts □ Frames

© Copyright 2001 - 2010 / Steelhead Metal & Fab / All Rights Reserved

ALONG WITH STEELHEAD’S FULL-LINE OF COMPONENT PRODUCTS FOR THE WIRELESS INDUSTRY, WE ALSO DESIGN AND PRODUCE:

www steelheadm ls.com

“ Were fully equipped to handle all of your needs”

OOFT ROOFTOP/WALL MOUNTSROOF OP/WALL MOUNTS




Part Description

Part Description

27

Tripod for Wireless Mount - 2⅜” Mast size - Total height 8’ 2”

SH15166 Tripod Mount

Tripod Microwave or Wireless Mount - 4½” Mast size - Total height 12’ - Includes (5) Step-Bolts

SH10594 Tripod Mount

5’

62½” Hole-to-Hole

Uses ¾” Anchor Bolts

2⅜” OD

Uses ¾” Anchor Bolts

5’

62½” Hole-to-Hole

4½” OD

UNTSROOFTOP/WALL MOUNTSROOFTOP/WALL MOUNTS




Part Description

Part Description

28

Small Non-Penetrating Roof Mount 3’ Base - Includes Pipe Mast - Blocks ordered separately - Rubber Mats ordered separately

SH13652 3’ x 3’ Base with 60” Mast SH10229 3’ x 3’ Base with 30” Mast

Small Non-Penetrating Roof Mount 5’ Base - Overall height 8’ - Includes Pipe Mast - Blocks ordered separately - Rubber Mats ordered separately

SH12488 5’x 5’ Base with 96” Mast

3’ SQ.

1.90” OD

SH10229: 5” SH13652: 35”

2⅜” OD 5’

5’ SQ





Part Description

Part Description

29

Non-Penetrating Sloped Roof Mount

- Will work on Roofs from flat to 45° pitch - Can use 2⅜” - 3½” OD Pipe Mount - Blocks ordered separately - Rubber Mats ordered separately - Mounting Pipe ordered separately

SH15174 Non–Pen Sloped Roof Mount

Tri-Sector Adapter for Pipe Mast - Includes U-Bolt Hardware - Mounting Pipe ordered separately

SH10460 3½” to 4½” Pipe Mast SH10583 5” to 6” Pipe Mast


2⅜” OD pipe mount





Part Description

Part Description

30

5’ Antenna Bay

5’ Antenna Bay

Tri-Sector Rooftop Frame - 12’ 3” Frame Height - 11’ 1” Face Width - Designed for 3 or 4 Antenna configuration - 10’ Antenna separation - 2⅜” Mounting Pipes ordered separately

SH12140 Tri-Sector Rooftop Frame

Tri- Sector Rooftop Frame - 10’ 3” Frame Height - 13’ Face Width - Designed for 3 or 4 Antenna configuration - 12’ Antenna separation - 2⅜” Mounting Pipes ordered separately

SH10973 Tri-Sector Rooftop Frame

Uses ⅞” Anchor Bolts

(Not included)

13’ A-Bolt Centers Uses ⅞” Anchor Bolts

(Not included)





Part Description

Part Description

31

Part Description

Tri-Sector Non-Penetrating Frame - 5’ 3” Frame Height - 13’ 6” Face Width - 12’ Antenna separation - 2⅜” Mounting Pipes ordered separately - Blocks ordered separately - Rubber Mats ordered separately

SH12476 Rooftop Frame

Single-Sector Rooftop Mount - 8’ Height - 11’ Face Width - Includes (4) Cross-over Kits for Mounting Pipes - 2⅜” Mounting Pipes ordered separately

SH10909 Rooftop Mount

Multi-Sector Rooftop Mount - Height adjustable up to 8’ - 12’ 6” Face Width - Includes (12) Cross-over Kits for Mounting Pipes - 2⅜” OD Mounting Pipes ordered separately

SH10908 Rooftop Mount

12’

7’ center to center

Uses ½” Anchor Bolts (Not included)

Uses ½” Anchor Bolts

(Not included)

12’ 6” center to center





Part Description

Part Description

32

Part Description


spacing for ⅝” Anchor Bolts (Not included)

Uses ½” Anchor Bolts

(Not included)

10’ Water Tank Antenna Support Frame - 6’ Height - 10’ Face Width - 10’ Antenna separation - Includes (3) 2⅜” OD x 6’ Mounting Pipes

SH12061 Antenna Support Frame

Water Tank Mount - Total Height 8’

SH10572 Water Tank Mount

5’ 2⅜” OD

Water Tank Mount - Fits 2⅜” OD or 4½” OD Pipe - U-Bolts included in Kit - Mounting Pipe ordered separately

SH11677 Water Tank Mount






Part Description

Part Description

33

Wall Mount Frame - Includes Cross-over Plates and Mounting Hardware for installing (4) Pipes - 6’ Height - 10’ 6” Face Width - 2⅜” OD Mounting Pipes ordered separately

SH15192 Wall Mount Frame

Wall Mount Kits

SH11082 Slider Kit for 2⅜” OD Pipe SH10129 Wall Mount Kit for 2⅜” OD Pipe SH2019 Wall Mount with 12” Standoff for 2⅞” OD Pipe

SH11082 SH10129 SH2019





Part Description

Part Description

34

Parapet Wall Mount

SH10418 Parapet Wall Mount

Slider Bracket - Includes U-Bolts & Mounting Hardware - Mounting Pipe ordered separately

SHWM-2 Wall Mount Slider For 2-3/8" OD Pipe SHWM-3 Wall Mount Slider For 3-1/2" OD Pipe





Part Description

Part Description

35

Hardware Kits for Wall Mounts Hollow or Solid Walls - Brackets ordered separetly

SH15193 Hollow Wall Hardware Kit SH15194 Solid Wall Hardware Kit

Corner Wall Mounts - Mounting Pipe ordered separetly

SH20156 Corner Wall Mount for 2-3/8” O.D. pipe SH11435 Corner Wall Mount for 4-1/2” O.D. pipe

SH15193 Hollow Wall Hardware (Bracket Not Included)

SH15194 Solid Wall Hardware

(Bracket Not Included)





Part Description

Part Description

36

3’ Standoff Wall Mount - 2⅜” Mounting Pipe ordered separately

SH10244 3’ Standoff Wall Mount

Custom Antenna Frame with RFP Support

SH12083 Custom Antenna Frame





Part Description

Part Description

Part Description

37

Rooftop Bridge Kits - Includes (3) Run-specific Sleepers and Assembly Hardware

SH1542-11 4 Run Rooftop Bridge Kit SH1543 8 Run Rooftop Bridge Kit SH1595 12 Run Rooftop Bridge Kit

Straight Splice

SH1544-11 Straight Splice for 4 Runs SH1543 Straight Splice for 8 Runs SH1596 Straight Splice for 12 Runs

45° Splice

SH1573 45° Splice for 4 Runs SH1574 45° Splice for 8 Runs SH1597 45° Splice for 12 Runs






Part Description

Part Description

Part Description

38

PVC Sleepers

SH11177 Rooftop Hood Entry

Rooftop Hood Entry

STHD248 Plain End Pipe, 2⅜ x 48 STHD263 Plain End Pipe, 2⅜ x 63 STHD272 Plain End Pipe, 2⅜ x 72 STHD284 Plain End Pipe, 2⅜ x 84 STHD296 Plain End Pipe, 2⅜ x 96 STHD2114 Plain End Pipe, 2⅜ x 114

SH1585 PVC Sleeper 96” (No Holes) SH1598 PVC Sleeper 22” 4 Run SH1599 PVC Sleeper 32” 8 Run SH1600 PVC Sleeper 42” 12 Run

Plain End Pipe - Galvanized

COAX SUPPORT & PROTECTIONCOAX S PORT & PROTECTION




Part Description

Part Description

39

Coax Ladder - Rung accommodates for both ⅜”

Hardware or Snap-ins - Angle Member attaching Hardware provided with Kit - SH10022 Round Member - SH10019 Universal Hardware Kit - We can also “Custom-Kit” a Coax Ladder for you!

SHCL106 10’6 Run Coax Ladder SHCL109 10’9 Run Coax Ladder SHCL1012 10’12 Run Coax Ladder SHCL206 20’6 Run Coax Ladder SHCL209 20’9 Run Coax Ladder SHCL2012 20’12 Run Coax Ladder

Coax Wall Covers - Accommodates for both ⅜” Hardware or Snap-ins

SH10246 12 Run Wall Cover SH10565 8 Run Wall Cover SH10566 4 Run Wall Cover

COAX UPPORT PR TECTIONCOAX SUPPORT & PROTECTION




Part Description

Part Description

40

Climbing Ladder Coax Support Bracket

SH1238 Coax Support Bracket

Monopole Coax Support Bracket & Cover - Accommodates for 12 runs of up to 1⅝” Coax - Banding & Clips ordered separately

SH10410 Coax Support Bracket & Cover SH10046 Brackets Only

COAX SUPPO T & PROTEC I NCOAX PPORT & PROTECTION




Part Description

Part Description

Part Description

41

Universal Snap-In Bracket - Accommodates for ⅜” Hardware

or Snap-ins 12 or 15 runs of up to 1⅝” Coax

SH10020 Fits 2”- 4” Pipe & 2”x 2”- 4”x 4” Angle SH10060 Fits 4”- 8” Pipe & 4”x 10” Angle

SH10635 Cluster Support Bracket 7 run SH11885 Cluster Support Bracket Large 18 run Version c/w 2”- 5” OD Angle Member Attach. SH11039 Cluster Support Bracket Large 18 run Version SH11203 Cluster Support Bracket Large 18 run Version c/w Hinge (not shown)

Cluster Support Brackets

Universal Standoff Bracket

- Accommodates for ⅜” Hardware

or Snap-ins 6 runs of up to 1⅝” Coax

SH11200 Fits 1½” x 1½” to 4” x 4” Angle And 1.90 OD to 4 ½” OD Pipe

COAX UPPORT PR TECTIONCOAX SUPPORT & PROTECTION




Part Description

Part Description

Part Description

42

Mini Cluster Block

SH11202 Mini Cluster Block Kit of 10

Universal Round Member

SH10180 Universal Round Member

SH1133 2’ Extension for 12” wide Solid Ice Bridge SH13208 2’ Extension for 24” wide Grip Strut SH10852 Splice for 2’ wide Grip Strut

Extensions for Solid Ice Bridge and Grip Strut

SH1320

BRIDGE K T OMPONENTSBR GE KIT COMPONENTS




43

(2) SHCAP3 3” Pipe Cap

(2) SH17841 24” Cantilever Kit

(2) SHTK224 Trapeze Kit 2 Tier 24” Wide

(1) SHGBC2410 24”x 10’ Gripstrut

Grated Bridge Channel

Cantilever

Pipe Sleeve

SHBK2410-BS SHBK2410-DB

(2) SH126 10’ BS Pipe Column or (2) SH130 13’4” DB Columns

(2) SH349 Formed Channel for pipeheads 24”

(3) SHTK224 Trapeze Kit 2 Tier 24” Wide

(4) SH10012 Pipe Column 18’ Direct Burial

(4) SH508 Pipe Sleeve

(1) SHGBC2410 24”x 10’ Gripstrut Trapeze Kit Vertical Trapeze Kit

3 Tier

BR DGE KI COM ON NTSBRIDGE KIT COMPONENTS




44

Cantilevers SH17841 24” Cantilever SHC12K 12” Cantilever

12” Bridge Trapeze Kits SHTK112 Z Bracket Styles / 1 Tier 12” Wide SHTK212 Z Bracket Styles / 2 Tier 12” Wide SHTK312 Z Bracket Styles / 3 Tier 12” Wide

24” Bridge Trapeze Kits SHTK124 Z Bracket Styles / 1 Tier 24” Wide SHTK224 Z Bracket Styles / 2 Tier 24” Wide SHTK324 Z Bracket Styles / 3 Tier 24” Wide

Vertical Trapeze Kit (3 Tier) SH11847 Angle Style / 3 Tier 24” Wide

Under Bridge Coax Support SH10124 Snap-in Hanger 12 runs, Horizontal

Bridge Channels - Grating and Solid SHGBC2410 Grating Style 24” x 10’ SHGBC2412 Grating Style 24” x 12’ SHGBC2420 Grip Strut 24” x 20’ SHGBC1210 Grip Strut 12” x 10’ SHGBC1212 Grip Strut 12” x 12’ SH501 Bridge Channel 12” x 10’ 11ga. SH502 Bridge Channel 12” x 5’ 11ga.

Splices and Extensions SH10856 Splice for 24” Grip strut SH503 Splices for Solid 12” Bridge SH504 Splices for Solid 12” Bridge SH505 Corner Filler SH511 24” Bridge Support Angle to Wall SH349 24” Bridge Channel for Pipe Heads SH508 Pipe Sleeve SH507 12” Channel for Pipe SH10317 Grip strut Splices 24”

Pipe Columns SH130 Direct Burial SH126 Anchor Bolt 10’ SH10012 3” x 18’ SH11419 Anchor Bolt Style SH10477 8’ with Square Base Plate SH10596 12’ Anchor Bolt Style SH11317 13’ 4” Anchor Bolt Style SH11346 14’ Anchor Bolt Style SP126 10’ Anchor Bolt Style

AB126 Anchor Bolt Cluster

SH10124

SH17841

EAVY DUTY BRIDGE KIT UPPORTHEAVY DU Y BRIDGE KIT SUPPORT




45

X Brace for Bridge Kits

SH10232 2’ Wide X Brace for Bridge Kits SH10934 3’ Wide X Brace for Bridge Kits SH10935 4’ Wide X Brace for Bridge Kits

Stabilizer Kit for Pipe Column

SH593 Stabilizer Kit

Part Description

Part Description




46

Equipment Rack - 15’ DB Post - 8’ Width

SH10103 Equipment Rack

These are two pre-kitted examples of Equipment Racks. At Steelhead, we can custom configure an Equipment Rack to meet any application.

Part Description

EQUIP. PLATFORMS & REQUIP. PLATFORMS & RACKSACKS

Telco-PPC Rack for Platform - 8’ Height - 6’ Width

Part Description

SH14974 Equipment Rack for Platform

QUIP. PLATFORMS & EQUIP. PLATFORMS & RAC SACKS




Part Description

Part Description

47

10’ x 16’ Equipment Platform

SH10263 10’ x 16’ Equipment Platform

12’ x 20’ Equipment Platform

SH20124 12’ x 20’ Equipment Platform





Part Description

Part Description

48

10’x 15’ Modular Platform - Adjustable foot weldments - Can be made to any size divisible by 2½’ and 5’

SH10118-1015 10’x 15’ Modular Platform

Equipment Platform with 4 Jacks - Adjusts to any ground conditions

SH13247 4’x 4’ with 4 Jacks SH13248 4’x 8’ with 4 Jacks SH13249 4’x 12’ with 4 Jacks SH13118 9’x 15’ with 4 Jacks

5’ 2½’

QUIP. PLATFORMS & EQUIP. PLATFORMS & RAC SACKS




Part Description

49

Adjustable Equipment Platform - Designed to span the Parapets of Rooftops - Adjustable from 22’ to 40’ - Bolt patterns can be adjusted to fit any size Radio Cabinets

Attachments for SH12599

SH13669 Pier Adapter Kit

SH13662 Side Mounted Telco Rack

SH13140 Antenna Mounting Kit

SH13139 Platform Support Kit

SH12599-2228 22’-28’ SH12599-2834 28’-34’ SH12599-3440 34’-40’

SH

SH13138 Platform Support Kit





Part Description

50

Part Description

Micro Cell Vault

Call for Further Details

8’ x 10’ Utility Vault

Call for Further Details

US OM A LICAT O SCUSTOM APPLICATIONS




Part Description

Part Description

51

Custom Platform

Example of a Custom Application to support a Shelter in an area that experiences adverse weather.

Custom Platform

Another example of a Custom Application meeting the stringent requirements of the U.S. Coast Guard.

Member of NACM

The National Association of Credit Managers

BUSINESS INFORMATION AND CREDIT APPLICATION

COMPANY NAME:_______________________________________________________________________

SHIPPING ADDRESS:____________________________________________________________________

CITY STATE ZIP

MAILING ADDRESS:_____________________________________________________________________

CITY STATE ZIP

PHONE NUMBER:___________________________FAX NUMBER:_________________________________

HOW LONG IN BUSINESS:___________________ TAX ID#:_________________________________

FORM OF BUSINESS ORGANIZATION:

_____SOLE PROPRIETOR _____PARTNERSHIP _____CORPORATION _____LLC

PURCHASE ORDER REQUIRED: _______YES ______NO

ACCOUNTS PAYABLE MANAGER/CONTACT_____________________ PHONE#______________________

BY SIGNING BELOW, THE UNDERSIGNED INDIVIDUAL GRANTS PERMISSION TO STEELHEAD METAL & FAB, LLC, TO THE RIGHT TO INQUIRE OF THE ABOVE NAMED REFERENCES FOR THE PURPOSE OF OBTAINING CREDIT INFORMATION. UPON APPROVAL OF CREDIT THE UNDERSIGNED AGREES TO ABIDE BY THE TERMS AND CONDI-TIONS SET FORTH BY THE SELLER AS FOLLOWS: STANDARD TERMS OF SALE: TERMS ARE NET 30 DAYS FROM DATE OF INVOICE UNLESS OTHERWISE STATED. REQUESTS FOR OTHER TERMS MUST BE APPROVED. A LATE CHARGE OF 1.5% PER MONTH (18% PER ANNUM), OR THE MAXIMUM ALLOWABLE BY LAW, WILL APPLY TO ALL PAST DUE INVOICES. IF INVOICES ARE NOT PAID WITHIN TERMS, CREDIT LINE MAY BE WITHDRAWN. IN THE EVENT THAT A DELINQUENT ACCOUNT IS PLACED IN THE HANDS OF A LICENSED COLLECTOR OR AN ATTORNEY FOR COLLECTION, OR SUIT IS INSTITUTED ON THIS ACCOUNT, I (WE) AGREE TO PAY, IN ADDITION TO THE AMOUNT OF THE DELINQUENT AMOUNT AND INTEREST, COURT COSTS, COLLECTOR’S AND / OR ATTORNEY’S FEES.

__________________________________ ___________________________ _____________________

SIGNATURE TITLE DATE

P.O. Box 3850 Salem, OR 97302 *Phone: 503-763-0114* Fax: 503-763-6280

CREDIT REFERENCES (must be current suppliers):

FIRM NAME:________________________ FAX:_____________________________

FIRM NAME_________________________ FAX:____________________________

FIRM NAME:________________________ FAX:_____________________________

NOTES NOTES




____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

____________________________________________________________________________________________________________

Member of NACM

The National Association of Credit Managers

Terms and Conditions 1. Payment Terms. The gross amount of the invoice is due within 30 days from invoice date. Discount terms (if applicable) are shown on the reverse side of this document. Buyer agrees to pay at the rate of one and one half percent (1-1/2%) per month on all invoices not paid within the selling terms. Payments will be applied first to service charges invoiced to the date of payment on all outstanding purchase invoices and the balance, if any, to the oldest purchase invoice then outstanding. 2. Invoices. All materials and goods are billed on published weights, areas, size and lengths, and all weighing will be by theo-retical weight of ASTM, which shall govern all settlements. All quotations are subject to prior sale unless otherwise specified in writing by Steelhead Metal & Fab,LLC, (“Steelhead”). 3. Shipments. If Buyer fails to make any payment when due Steelhead may in addition to any other right or remedy, cancel or stop shipment in transit until satisfactory arrangements have been made. 4. Delays. Steelhead shall not be responsible or liable for failure to fill any order or orders when failure is due to: earth-quakes, fires, floods, riots; or other civil disorder; any act of war; str kes, mill shortages; freight embargoes or transportation delays; shortages of labor; fuel or power; inability to secure materials or supplies at current prices or on account of shortages thereof; acts of God or of any public enemy; any existing or future statute, rule regulation, order, or act of the federal State or local governments (or agencies thereof) affecting the conduct of Steelhead ’s business; any other cause beyond Steelhead’s reasonable control, whether affecting the procurement, production or transportation of the particular order. 5. Security interest. Steelhead shall retain a security interest in all materials and goods until Buyer makes payment in full, Buyer by acceptance of the goods and materials described on the face of this document, grants to Steelhead a security inter-est in all other inventory now or hereafter owned or possessed by the buyer to secure payment of the purchase price of the goods and materials. Buyer agrees within twenty-four (24) hours’ notice from Steelhead to execute the appropriate UCC fi-nancing statements to evidence the security interests of Steelhead. 6. Risk of loss. Risk of loss or damage to goods shall be upon Buyer upon delivery by Steelhead to the carrier, F.O.B. ship-ping point (or if delivered by Steelhead vehicles F.O.B. jobsite) additionally 7. Inspection – claims. Buyer shall inspect material against shipping papers upon delivery and unloading at destination. No claims for shortages or damaged material will be valid or recognized by Steelhead unless written notice specifying the nature and extent of such shortage or damage is mailed to Steelhead within five (5) days from the date of delivery accompanied by the original freight bill, with notation by the authorized agent of the carrier as to the items and quantities short or damaged. When delivery is by a Steelhead truck, all claims for shortages and damaged material must be mailed to Steelhead within 72 hours of the date of delivery. In no event shall Steelhead be responsible for or liable for any incidental, special, or consequen-tial damage or commercial loss of any type or nature by reason of such shortage or damaged materials. 8. Limited Warranty. Steelhead warrants only to buyer that the materials shipped under any order conform to the description on the face thereof, subject to tolerances and variations consistent with usual and customary trade practices. Except for title, no other warranties which extend beyond the description in respect to the materials, and the above warranty is expressly made in lieu of any and all other warranties express, implied or statutory, including the warranties of merchantability and fitness for a particular purpose or use, and no express or implied warranties except as above stated shall apply to goods or materials sold by Steelhead and no waiver alterations or modifications of the foregoing shall be valid unless expressly made in writing and signed by an officer of Steelhead. Should any items supplied by Steelhead fail to conform to the description, Steelhead’s liability shall be limited to repair or replacement of the item or refund of the purchase price, at Steelhead’s option, if; (1) Buyer gives Steelhead written notice specifying in detail the nonconformity or defect within ten (10) days from the date of delivery; (2) Buyer shall at it’s expense within ten (10) days after request return the items to Steelhead’s yard; and (3) Steelhead inspectors determine in fact that the items are nonconforming or defective; (4) terms of payment have been fully met. 9. Taxes. All prices quoted by Steelhead are exclusive of all city, state and federal excise taxes, including, but without limita-tion, taxes on manufacture, sales, receipts, gross income, occupation, use and similar taxes. 10. Remedies. All purchases shall be governed by the uniform commercial code of the State of Oregon. 11. Agreement of sale. Conditions of any order by buyer which are inconsistent with the terms and conditions hereof shall not be binding on Steelhead and shall not be considered applicable to the sale or shipment of any items by Steelhead unless expressly agreed to in writing and signed by an executive officer of Steelhead. 12. Attorney fee provision. Steelhead shall be entitled to its reasonable attorney’s fees in any effort to enforce this agree-ment whether or not a lawsuit is mitigated. Should suit action or other proceeding be instituted to collect any amount due, Steelhead, shall be entitled to recover from the other party reasonable attorney fees in both trial and appellate courts. 13. Assignment. Buyer may not assign or delegate the performance of any of the provisions of this agreement without Steel-head’s prior written consent.

Signature of Owner/Officer X________________________________________________ Date______________

“ Were fully equipped to handle all of your needs”

www.steelheadmetals.comwww.steelheadmetals.com

Wireless Structures □ Self Support Towers □ Tapered Monopoles □ Pipe Poles

Call the experts at Steelhead for a free quote on all your Steel Applications !

Local: 503-763-0114 Fax: 503-763-6280

or Toll Free: 877-900-6789

For Hardware and Accessories look to Steelhead’s new H & A Catalog!

Utilities □ Sub-Station Steel □ Transmission Towers □ Transmission Poles

D.O.T.

□ Sign Bridges □ VMS Poles and Bridges □ Break-away Sign Supports

Commercial □ Structural Steel □ Support Posts □ Frames

© Copyright 2001 - 2006 / Steelhead Metal & Fab / All Rights Reserved

ALONG WITH STEELHEAD’S FULL-LINE OF COMPONENT PRODUCTS FOR THE WIRELESS INDUSTRY, WE ALSO DESIGN AND PRODUCE:

Documents

Site Steel Product Catalog 2009 - steelheadmetals.comsteelheadmetals.com/docs/catalog/SIte Steel Product Catalog_Low Res... · Monopoles Lattice & Guyed Tower Rooftop/Wall Mounts