SIRIUS-1250/1750/2500 · 4 HWACHEON CATALOG : SIRIUS-1250/1750/2500 ... product configuration 14 HWACHEON CATALOG : ... •tool measuring system-renishaw / Blum

Large-Size Vertical Machining Center in Bridge Type Design

SIRIUS-1250/1750/2500

1

2 HWACHEON CATALOG : SIRIUS-1250/1750/2500

1

Large-Size VerticaL Machining center in Bridge type deSign

SIRIUS-1250/1750/2500 with Bridge Type Design

SIRIUS-1250/1750/2500 are large bridge-type vertical machining centers with

precision feed drive and high-performance spindle. These machining centers

provide a total solution from tool selection to product completion-making them

ideal for your extra-size mold applications where quality is essential.

1

3Large-Size vertical machining centers

2 3

4

1 Auto Mobile Top Cover / Auto Driving / GC-250 2 63” LCD TV Back Cover / Home Appliances / KP4M

3 Auto Mobile Bumper Part / Auto Driving / KP4M 4 Auto Mobile Back Door Cover / Auto Driving / KP4M


high-QUaLity Machining FOr eXtra-Size MOLd appLicatiOnS

Hwacheon's extra-size bridge type vertical machining centers guarantee to

enhance the quality of your large mold applications, such as large display

frame, automotive and aerospace parts.

The SIRIUS series of large size vertical machining centers use powerful built-in motor

spindles and high-speed, high precision milling heads complemented by Hwacheon's

proprietary Oil-Jet cooling system-to guarantee consistent strong roughing performance

and provide high quality product result hours after hours of high speed machining. Each

SIRIUS vertical center is designed using 3D simulation FEM analysis to achieve structural

rigidity which can translate to quality product results; while the Hwacheon designed

machining software components enhance safety and work efficiency in your factory.

The machines are configurable with many different options so that they can integrate

perfectly to your work environment and application.

Large-Size Mold Machining

Symmetrical portal structure for extra stabilityThe symmetrical portal structure is the ideal design for

distributing vibration, the upper weight, and the heat

evenly throughout the entire frame. This characteristic is

the base for the machine to maintain its feed precision

even after hours of continuous machining; the distance

between the Y-axis and the contact point of the tool has

been minimized to enhance the overall rigidity and

machining precision.

5Large-Size Mold Machining

Oil-Jet CoolingThe Oil-Jet cooling and the Jacket Cooling designs have been perfected

by Hwacheon's experience and know how in building high quality spindles.

These unique yet highly effective cooling systems minimize the thermal

displacement during prolonged machine operations.

Integrated Motor SpindleIn Hwacheon temperature controlled clean room facilities, where this Super

Precision High Speed Spindles are assembled, only the most experienced and

skilled engineers are allowed to produce at highest industry and quality standards

a spindle worth to be named Made by Hwacheon.

Oil cooler

Suction pump

Motor housing radiation (Jacket circulated)

cooling oil out

cooling oil in

Front bearing radiation (Jacket circulated)

rear bearing cooling (Oil-jet)

Front bearing cooling (Oil-jet)

integrated motor (Built-in)

Oil tankSpindle Oil(hi-yUn)




Machining SOFtwareThe Hwacheon Machining

Software Components

htdc integrates the hwacheon Spindle displacement

control system and the Frame displacement control System.

htdc (hSdc + hFdc)hwacheon thermal displacement control System

(hSdc + hFdc)

hFdchwacheon Frame displacement control System

the hSdc system corrects the z-axis error occuring from the

taper expansion during the spindle's high speed rotation.

Static displacement compensation

when the spindle rotates at high speed, the

centrifugal force drives the taper to expand, causing

errors in z axis. hSdc constantly monitors the

temperature at each spindle region and makes

optimal prediction for thermal displacement.

the system then makes necessary adjustments and

effectively minimizing thermal displacement.

hSdchwacheon Spindle displacement control System

+ RELIABILITY

hFdc is equipped with highly sensitive thermal

sensors located at various locations where thermal

activity is suspected; monitoring and correcting

displacement.

The Hwacheon's developed

machining software monitors

different variables related to the

work environment and machining

conditions automatically makes

adjustments for best quality results

and optimum work efficiency.

9The Hwacheon Machining Software Components

PRECISION ++ RELIABILITY

SPEED +

hecc offers an easy-to-use programming interface for different work

-pieces and different processing modes. the system provides a precise,

custom contour control for the selected workpiece, while prolonging the

life of the machine and decreasing process time. the customizable display

provides real-time monitoring and quick access.

hecchwacheon high-efficiency contour control System

• Program offers different options for different cutting speed

and accuracy for roughness and shapes.

• The customizable display provides real-time monitoring and quick, easy access.

• The program is executable on an existing NC DATA system

and works with the g code system.

htLdhwacheon tool Load detect System

htLd constantly monitors the tool wear to prevent accidents,

which may occur from a damaged tool and help to stop tool

wear from deteriorating the workpiece.

(the load is measured every 8 msec to ensure accuracy)

OptiMa utilizes an adaptive control method to

regulate the feed rate in real time, to sustain the

cutting load during a machining process. as a result

the tools are less prone to damage and the

machining time is reduced.

OptiMacutting Feed Optimization System

SIRIUS-1250/1750/2500 vertical machining centers offer user friendly design

and a wide variety of useful options for practical applications, so you can

concentrate on what you do best: creating quality products-without losing

your valuable time to the worries of machine failure and safety.

A wide variety of performance enhancing options are available for faster,

more precise machining.


Full-enclosure exterior cover(Option for SIRIUS-1750 only)The exterior cover envelops the machine

to keep the operator safe from chips,

lubricant, dust and helps to maintain

clean work environment. The smooth-

operating slide door is easily accessible

even from the opposite side when

setting up a large workpiece.Auto measurement system (Option)When the machine begins to work, the measurement system automatically measures the work

-piece and the tool, and makes necessary adjustment. This system saves machining time and

guarantees high quality result every time regardless of the machinist's skill and because the system

constantly monitors the tools and the workpiece for any abnormality, potential machine-related

accidents can be prevented. The system integrates perfectly with other equipment to make your

automated production line more productive and efficient.

USer FriendLy deSign,a wide range OFOptiOnaL FeatUreS

* Unit: mm(inch)Product Data : SIRIUS-1250

Spindle Power – Torque Diagram

Standard (8,000rpm) Option (12,000rpm)

11

Front

Length=7,305(287.6”)

Left side

hei

gh

t=3,

960(

155.

91”)

8 tool width=3,975(156.5”)

40 tool width=4,145(163.19”)

Top

40 to

ol=

3,55

5(13

9.96

”)

8 to

ol=

3,38

5(13

3.27

”)

(wit

ho

ut M

oto

r & h

ead

co

ver)

8 to

ol=

910(

35.8

3”)

40 to

ol=

1,08

0(42

.52”

)

Product Data

(automatic switching)(automatic switching)

3,190(125.59”)

3,65

0 (1

43.7

”)

1,90

0(74

.8”)

85(3

.35”

)

3,53

5(13

9.17

”)

885(

34.8

4”)

door Open : 1,460(60.24”)

1,75

0(68

.9”)

590(23.23”)

torq

ue(

nm

)

500

100

200

300

400

0

40

30

20

10

5000 1500 80002500 4000 6000600

pow

er(k

w)

Spindle Speed(rpm)

(10min, 25%)

30kW(30min)

25kW(Cont.)

22kw(10min)15kw(cont.)

239nm(cont.)

114.5nm(30min)

95.5nm(cont.)

350nm (10min)420nm (10min, 25%)

500 600

torq

ue(

nm

)

500

100

200

300

400

0

40

30

2020.724.7

10

0 1500 120002500 5000 10000

pow

er(k

w)

Spindle Speed(rpm)

(10min, 25%)

30kW(30min)

25kW(Cont.)


239nm(cont.)

350nm(10min)420nm(10min, 25%)

95.5nm(cont.)

(do

or o

pen

)

1,38

5(54

.53”

)

1,85

0(72

.84”

)

550(21.65”)

590(23.23”)

775(30.51”)460(18.11”)

400(15.75”)

* Unit: mm(inch)Product Data : SIRIUS-1750

Spindle Power – Torque Diagram

Option (15,000rpm)Standard (12,000rpm)

Top

FrontLeft side


(automatic switching)(automatic switching)

Length=8,840(348.03”)width=5,510(217”)

hei

gh

t=5,

020(

197.

64”)

Lift up chip conveyor (Front, rear)

Lift up chip conveyor (Front, rear)

4,022(158.35”)

1,77

0(69

.69”

)

80(3

.15”

)

door Open : 2,265(89.17”)

500 600

torq

ue(

nm

)

500

100

200

300

400

0

40

30

2020.724.7

10

0 1500 120002500 5000 10000

pow

er(k

w)

Spindle Speed(rpm)

(10min, 25%)

30kW(30min)

25kW(Cont.)


239nm(cont.)

350nm(10min)420nm(10min, 25%)

95.5nm(cont.)

736(

128.

96”)

2,72

2(10

7.17

”)1,

003(

39.4

9”)

500(19.69”)

pow

er(k

w)

400

300

200191nm(cont.)

0 0

100

40

30

20

10

10000750

0 25001500 150005000800

Spindle Speed(rpm)

30kW(30min)

25kW(Cont.)

95.5kw(cont.)114.5nm(30min)

262nm(10min)

22kw(10min)

15kw(cont.)

torq

ue(

nm

)

4,677(184.13”) 60tool

3,429(135”) 40tool

805(31.69”)

750(29.53”)

4,760(187.4”)410

(16.14”) 750(29.53”)

2,78

3(10

9.57

”)3,

133

(123

.35)

1,88

0(74

.01”

)

▒ gap type(high column)

5,37

0(21

1.42

”)

2,55

0(88

.58”

)

* Unit: mm(inch)Product Data : SIRIUS-2500 (Short Bed) / SIRIUS-2500L [Long Bed(4m)]

Spindle Power – Torque diagram

Standard (8,000rpm) Option (12,000rpm)

FrontLeft side

13Product Data

(automatic switching) (automatic switching)

torq

ue(

nm

)

500

100

200

300

400

0

40

30

20

10

5000 1500 80002500 4000 6000600

Spindle Speed(rpm)

(10min, 25%)

30kW(30min)

25kW(Cont.)


239nm(cont.)

114.5nm(30min)

95.5nm(cont.)

350nm (10min)420nm (10min, 25%)

500 600

500

100

200

300

400

0

40

30

2020.724.7

10

0 1500 120002500 5000 10000

pow

er(k

w)

Spindle Speed(rpm)

(10min, 25%)

30kW(30min)

25kW(Cont.)


239nm(cont.)

350nm(10min)420nm(10min, 25%)

95.5nm(cont.)

pow

er(k

w)

torq

ue(

nm

)

width=5,000(196.85”)

(wit

ho

ut c

hip

co

nve

yor)

hei

gh

t=4,

566(

179.

76”)

Top

80(3.15”)

490(19.29”)

Length=8,830(347.64”) / 10,770(424.02”)

3,990(157.09”) / 4,880(192.13”)

1,11

0(43

.7”)

1,94

5(76

.57”

)

4,04

5(15

9.25

”)

door Open : 2,265(60.24”)

600(23.62”)

1,57

0(61

.81”

)

400(15.75”)

1,250(49.21”)2,140(84.25”)

500(19.69”)

3,02

0(11

8.9”

)36

0(14

.17”

)40

0(15

.75”

)

945(37.21”)650(25.59”) /700(27.56”)

2,15

0(84

.65”

)

4,40

0(17

3.23

”)

(do

or o

pen

)

4,41

0(17

5.62

”) /

(4,4

50(1

75.2

0”)

[2,2

45(8

8.39

”)]

[4,3

45(1

71.0

6”)]

▒ Short Bed ▒ Long Bed(4m) [ ] gap type

[4,8

66(1

91.5

7”)]

product configuration


8,000rpm 12,000rpm

8-tools magazine 40-tools magazine

12,000rpm 15,000rpm

40-tools magazine 60-tools magazine

SiriUS-1750

SiriUS-1250

Bt-50 (Opt.: BBt-50, cat-50)

Bt-50 (Opt.: BBt-50, cat-50)

SiriUS-2500

8,000rpm 12,000rpm

40-tools magazine

Short Bed(X stroke 3,100mm)

Long Bed(X stroke 4,000mm)

Bt-50 (Opt.: BBt-50, cat-50)

each product can be configured to fit your application.

Standard and Optional product components: SIRIUS-1750

Standard Accessories Optional Accessories

•adjust bolt, block & plate •cutting Feed Optimization System (OptiMa) •air dryer •Spindle through coolant (30bar, 70bar)•air blower •hwacheon efficient contour •air gun -in case of Full cover applicable•Base around splash guard control System (hecc) •auto door •tool life management (Semi cover) •hwacheon tool Load detect System (htLd) •Base around splash guard (Full cover) •tool measuring system-renishaw / Blum

•coil conveyor (2ea) •hwacheon thermal displacement •coolant gun •transformer•coolant system control System (htdc) •data server interface (touch type, Laser type)•data server (256 MB) - hwacheon Spindle displacement •data server (1,024MB) •workpiece measuring system-renishaw / Blum

•Linear scale (X / y / z) control System (hSdc) •gap 350 mm (high column) (touch type)

•Lubrication system - hwacheon Frame displacement •Lift up chip conveyor •4-axis interface•Mpg handle (1ea) control System (hFdc) (hinge type, Scraper type) •hwacheon ai nano contour control•Operation manual & parts list •hwacheon ai nano contour control •Manual guide i System (hai) 600/1,000 block buffer•pneumatics system System (hai) 200 block buffer •Mist collecter •additional tool Storage capacity - 60ea

•rigid tapping •10.4” color Lcd display •Mpg handle (3ea)•Signal lamp (r / g, 2 color) •nano Smoothing interpolation•Spindle cooler •nUrBS interpolation•tool kit & box •Oil mist (Semi dry cutting system)•work light •Signal lamp (r / g / y, 3 color)•workpiece coordinate system (48ea)

Standard and Optional product components : SIRIUS-2500


•adjust bolt, block & plate •work light •air dryer •workpiece measuring system-renishaw / Blum

•air blower •workpiece cordinate system (48ea) •air gun (touch type)

•Base around splash guard •10.4” color Lcd display •BBt spindle •4-axis interface (Semi cover) •cutting Feed Optimization System (OptiMa) •data server (1,024MB) •hwacheon ai nano contour control•coil conveyor (2ea) •hwacheon efficient contour •gap 300mm (high column) System (hai) 600/1,000 block buffer•coolant gun control System (hecc) •Lift up chip conveyor •coolant system •hwacheon tool Load detect System (htLd) (hinge type, Scraper type)•data server interface •hwacheon thermal displacement •Manual guide i•data server (256MB) control System (htdc) •nano smoothing interpolation•Linear scale (X / y / z) - hwacheon Spindle displacement •nc cooler•Lubrication system control System (hSdc) •nUrBS interpolation•Mpg handle (3ea) - hwacheon Frame displacement •Oil mist (Semi dry cutting system)•Operation manual & parts list control System (hFdc) •Oil skimmer•pneumatics system •hwacheon ai nano contour control •Signal lamp (r / g / y, 3 color)•rigid tapping System (hai) 200 block buffer •tool life management•Signal lamp (r / g, 2 color) •tool measuring system-renishaw / Blum

•Spindle cooler (touch type, Laser type)

•tool kit & box •transformer

Standard and Optional product components : SIRIUS-1250


•adjust bolt, block & plate •cutting Feed Optimization •air dryer •tool measuring system-renishaw / Blum•air blower System (OptiMa) •air gun •transformer•Base around splash guard •hwacheon efficient contour •BBt spindle (touch type, Laser type) (Semi cover) control System (hecc) •coolant gun •workpiece measuring system•coil conveyor (2ea) •hwacheon tool Load detect System(htLd) •data server interface -renishaw / Blum (touch type)•coolant system •hwacheon thermal displacement •data server (256MB / 1,024MB) •additional y-axis stroke (90mm)•Linear scale (X / y / z) control System (htdc) •gap 225mm (high column) •4-axis interface•Lubrication system - hwacheon Spindle displacement •Lift up chip conveyor •hwacheon ai nano contour control•Mpg handle (1ea) control System (hSdc) (hinge type, Scraper type) System (hai) 600/1,000 block buffer•Operation manual & parts list - hwacheon Frame displacement •Manual guide i•pneumatics system control System (hFdc) •Mpg handle (3ea)•rigid tapping •hwacheon ai nano contour control •nano smoothing interpolation•Signal lamp (r / g, 2 color) System (hai) 200 block buffer •nc cooler•Spindle cooler •nUrBS interpolation•tool kit & box •Oil mist (Semi dry cutting system)•work light •Oil skimmer•workpiece coordinate system(48ea) •Signal lamp (r / g / y, 3 color)•8.4” color Lcd display •tool life management

15Machine Specifications


Machine Specifications

iteMSiriUS-1250 SiirUS-1750 SiriUS-2500

8 tool 40 tool 40 tool 60 tool Short Bed Long Bed

8,000 12,000 8,000 12,000 12,000 15,000 12,000 15,000 8,000 12,000 8,000 12,000

travel

Stroke (X / y / z) mm(inch)2,500 (98.43”) / 1,250 (49.21”) / 750

(29.53”)3,000 (118.11”) / 1,750 (68.90”) /

800 (31.50”)3,100 (122.05”) / 2,300(90.55”) / 900 (35.43”)

4,000 (157.48”) / 2,300(90.55”) / 900 (35.43”)

distance from table surface to spindle gauge plane mm(inch) 250 (9.84”) ~ 1,000 (39.37”) 200 (7.87”) ~ 1,000 (39.37”) 250 (9.84”) ~ 1,150 (45.28”)

distance between columns to spindle center mm(inch) 180 (7.09”) 435 (17.13”) 200 (7.87”)

distance between columns mm(inch) 1,520 (59.84”) 2,000 (78.74”) 2,300 (90.55”) 2,400 (94.49”)

table

working surface mm(inch) 2,800 (110.24”) x 1,250 (49.21”)3,200 (126.00”) x 1,750 (68.90”)

3,300 (129.92”)x 2,000 (78.74”)

4,200 (165.35”)x 2,000 (78.74”)

table loading capacity kg(lb) 5,000 (11,023) 10,000 (22,046) 10,000 (22,046) 15,000 (33,069)

table surface configuration (t slots wxp – no. of slots) mm(inch) 22 (0.87”) x 160 (6.3”) -7개 22 (0.87”) x 200 (7.87”) -8개 22 (0.87”) x 200 (7.87”) -9개

SpindleMax. Spindle speed rpm 8,000 12,000 8,000 12,000 12,000 15,000 12,000 15,000 8,000 12,000 8,000 12,000

Spindle motor kw(hp) 30 (40.23) / 25 (33.53) 30 (40.23) / 25 (33.53) 30 (40.23) / 25 (33.53)

type of spindle taper hole - iSO#50, 7/24 taper (Bt-50)iSO#50,

7/24 taper (Bt-50)iSO#50, 7/24 taper (Bt-50)

Spindle bearing inner diameter mm(inch) Ø100 (3.94”) Ø100 (3.94”) Ø100 (3.94”)

Method of spindle lubrication & cooling - Jet Lub. + Jacket cooling Jet Lub. + Jacket cooling Jet Lub. + Jacket cooling

Feedrate

rapid speed (X / y / z) m/min(ipm) 16 (630) / 16 (630) / 16 (630) 16 (630) / 16 (630) / 16 (630)

16 (630) / 16 (630) / 16 (630)

10 (394) / 16 (630) / 16 (630)

Feedrate (X / y / z) mm/min(ipm) 1 (0.04) ~ 8,000 (315) 1 (0.04) ~ 8,000 (315) 1 (0.04) ~ 8,000 (315)

atc

type of tool shank - Bt-50 (Opt.:BBt-50, cat-50)Bt-50

(Opt.:BBt-50, cat-50)Bt-50 (Opt.:BBt-50, cat-50)

type of pull stud - 90˚ type (Bt-50) 90˚ type (Bt-50) 90˚ type (Bt-50)

tool storage capacity ea 8 40 40 60 40

Max. tool diameter [without adjacent tools] mm(inch)

Ø200 (7.87”)/ Ø200 (7.87”)

Ø120 (4.72”)/ Ø200 (7.87”)

Ø120 (4.72”) / Ø200 (7.87”)

Ø120 (4.72”) / Ø200 (7.87”)

Max. tool length mm(inch) 350 (13.78”) 400 (15.75”) 450 (17.72”)

Max. tool weight kg(lb) 20 (44.09) 20 (44.09) 20 (44.09)

Method of tool selection - Fixed address random memory random memory random memory

Method of operation (Magazine / Swing arm) - Servo Motor

/ armlessServo Motor / Servo Motor

Servo Motor / Servo Motor Servo Motor / Servo Motor

tool changing time (t to t / c to c) sec 10 / 15 5 / 10 5 / 11 3.5 / 10

Motor

Feed motor (X / y / z) kw(hp) 7.0 (9.39) / 7.0 (9.39) / 7.0 (9.39)9.0 (12.07) / 6.0 (8.05)

/ 9.0 (12.07)9.0 (12.07) / 9.0 (12.07) / 9.0 (12.07)

coolant motor (Spindle) kw(hp) 0.4 (0.55) 0.4 (0.55) 0.4 (0.55)

Spindle cooler (50 / 60hz) – inverter type kw(hp) 5.0 (6.71) /

5.6 (7.51)8.0 (10.73)/ 8.9 (11.94)

5.0 (6.71) / 5.6 (7.51)

8.0 (10.73)/ 8.9 (11.94)

8.0 (10.73)/ 8.9 (11.94)

5.0 / 5.6 & 8.0 / 8.9

(6.71 / 7.51 & 10.73 /

11.94)

8.0 (10.73)/ 8.9 (11.94)

5.0 / 5.6 & 8.0 / 8.9

(6.71 / 7.51 & 10.73 /

11.94)

5.0(6.17) / 5.6(7.51)

8.0(10.73) / 8.9(11.94)

5.0 (6.17) / 5.6 (7.51)

8.0 (10.73) / 8.9 (11.94)

power Sourceelectric power supply kVa 75 75 75

compressed air supply (pressure x consumption) - 0.5 ~ 0.7Mpa x 1,870nℓ/min

0.5 ~ 0.7Mpa x 1,870nℓ/min

0.5 ~ 0.7Mpa x 1,870nℓ/min

tank capacitySpindle cooling / Lubrication ℓ(gal) 60 (15.85) / 12(3.17) 60 (15.85) / 12(3.17) 60 (15.85) / 12(3.17)

coolant ℓ(gal) 450 (118.88) 850 (224.55) 850 (224.55)

Machine Sizeheight mm(inch) 3,960 (155.9”) 5,020 (197.64”) 4,566 (179.76”)

Floor space (Length × width) mm(inch) 7,305x3,975 (287.6”x 156.5”)

7,305x4,145 (287.6”x 163.2”)

8,840 x 5,510 (348.03” x 217.00”)

8,830 x 5,000 (347.64” x 196.85”)

10,770 x 5,000 (424.02” x 196.85”)

weight kg(lb)24,000

(69,887)25,900

(68,784)39,000

(85,980)39,650

(87,413)41,350 (91,161) 45,350 (99,980)

nc controller Fanuc 31i-a

17

※ ㅡ : not available S : Standard O : OptionNC Specifications [Fanuc 31i-a]

ITeM SPeCIFICATION

controlled axiscontrolled axis 3-axes Scontrolled axis 5-axes (Max.) OSimultaneously controlled axes 3-axes SSimultaneously controlled axes 4-axes (Max.) O

Least input increment0.001mm, 0.001deg, 0.0001inch

S

Least input increment 1 / 100.0001mm, 0.0001deg, 0.00001inch O

inch / metric conversion g20, g21 SStore stroke check 1 / 2 SMirror image SStore pitch error compensation SBacklash compensation S

Operationautomatic & Mdi operation Sdnc operation by memory card pcMcia card is required S

program number search / Sequence number search S

dry run, Single block SManual handle feed / Feed rate 1 Unit / x1, x10, x100 S

interpolation function

positioning / Linear interpolation / circular interpolation / dwell (per seconds)

g00 / g01 / g02,g03 / g04 S

helical interpolationcircular interpolation plus Max.2axes linear interpolation

S

nano smoothing O

reference position return check / return

g27 / g28, g29 S

2nd reference position return g30 SSkip g31 SnUrBS interpolation O

Feed functionrapid traverse override F0, F25, F50, F100 SFeedrate (mm / min) SFeedrate override 0 ~ 150% SJog feed override 0 ~ 4,000mm/min SOverride cancel M48, M49 S

program inputtape code eia rS244 / iSO840 SOptional block skip 1ea Sprogram number O4-digits SSequence number n8-digits Sdecimal point programming Scoordinate system setting g92 Sworkpiece coordinate system g54 ~ g59 Sworkpiece coordinate system preset Oaddition of workpiece coordinate pair 48ea Saddition of workpiece coordinate pair 300ea Oextend program edit function copy / move/.. SManual absolute on and off Schamfering / corner r SSub program call 10 folds nested Scustom macro B S

addition of custom macro common variables

#100 ~ #199, #500 ~ #999 O

canned cycle for drilling SSmall-hole peck drilling cycle Oautomatic corner override OFeedrate clamp based on arc radius SScaling Oprogrammable data input g10 Scoordinate system rotation S

ITeM SPeCIFICATIONprogrammable mirror image Otape format for fanuc series 15 OManual guide i O

Spindle speed functionSpindle serial output SSpindle override 50 - 120% SSpindle orientation Srigid tapping S

tool function / compensationtool function t4 - digits Stool offset pairs ±6 - digits 200ea Stool offset pairs ±6 - digits 400ea, 999ea Otool offset memory c Stool length compensation Scutter compensation c Stool life management Otool length measurement S

editing operation

part program storage length / number of register able programs

128kB / 250ea S

part program storage length / number of register able programs

256kB / 500ea, 512kB / 1,000eaO

1MB / 1,000ea, 2MB / 1,000eaBackground editing Sextended editing functions Splay Back O

Setting and displayclock function SSelf-diagnosis function / alarm history display help function / graphic function

S

run hour and parts count display S

Multi-language display

english, german, French, italian, chinese, Spanish, Korean, portuguese, polish, hungarian, Swedish, russian

S

data input / outputreader / puncher interface ch1 rS232c S

data serverSiriUS-1250 : 256MB OSiriUS-1750 : 256MB

SSiriUS-2500 : 256MB

data server 1,024MB Oethernet interface / Memory card interface

S

Others

display unitSiriUS-1250 : 8.4” color LcdSiriUS-1750 : 10.4” color LcdSiriUS-2500 : 10.4” color Lcd

S

hwacheOn artificial intelligenceai nano contour control System(hai) 200 Block Buffer

S

ai nano contour control System(hai) 600/1000 Block Buffer

O

hwacheon efficient contour control System (hecc)

S

hwacheon tool Load detect (htLd) Scutting Feed Optimization System (OptiMa)

S

hwacheon thermal displacement

S

control System (htdc) = - hwacheon Spindle displacement control System (hSdc) - hwacheon Frame displacement control System (hFdc)

4- axis interface function Optioncontrolled axes / Simultaneously controlled axes / control axis detach

included 4-axisinterface option

O

Machine Specifications

Hwacheon Global Network

The product design and specifications may change without prior notice.

Read the operation manual carefully and thoroughly before operating the product,

and always follow the safety instructions and warnings labels attached on the surfaces of the machines.

HeAD OFFICe

HWACHeON MACHINe TOOL CO., LTD

976-1, JANGDEOK-DONG GWANGSAN-GU, GWANGJU, KOREA

TEL: +82-62-951-5111 FAX: +82-62-951-0086

SeOUL OFFICe

1022-7, BANGBAE-DONG, SEOCHO, SEOUL, KOREA

TEL: +82-2-523-7766 FAX: +82-2-523-2867

GeRMANY

HWACHeON MACHINeRY eUROPe GMBH

JOSEF-BAUMANN STR. 25, 44805, BOCHUM, GERMANY

TEL: +49-2349-128160 FAX: +49-2349-128166

www.hwacheon.com

Please call us for product inquiries.

HC-M263-R1.4-201304

hwacheon headquarters hwacheon europe hwacheon asia hwacheon america

USA

HWACHeON MACHINeRY AMeRICA, INC.

50, LAKEVIEW PARKWAY VERNON HILLS, IL60061, USA

TEL: +1-847-573-0100 FAX: +1-847-573-9900

SINGAPORe

HWACHeON ASIA PACIFIC PTe. LTD.

21 BUKIT BATOK CRESCENT, #08-79 WCEGA TOWER SINGAPORE 658065

TEL: +65-6515-4357 FAX: +65-6515-4358

Documents

SIRIUS-1250/1750/2500 · 4 HWACHEON CATALOG : SIRIUS-1250/1750/2500 ... product configuration 14 HWACHEON CATALOG : ... •tool measuring system-renishaw / Blum