Upload
doanhanh
View
228
Download
1
Embed Size (px)
Citation preview
1366 www.hettich.com
The choice is yours: MultiTech drawer side profiles come in grey and white.
No need to go without a feel of luxurious convenience: gentle closing with Silent System now also for MultiTech.
MultiTech in the office pedestal with organiser for suspended files and locking system.
Drawer-front tilt can be adjusted directly at the railing. A neat solu-tion.
As a single-walled MultiTech drawer system, MultiTech from Hettich provides parti-cularly inexpensive solutions for all parts of the home. With a wide range of side profile heights to choose from, you can use MultiTech in a wealth of applications, e.g. for kitchen, bathroom and office furniture. Assem-bly could hardly be easier and faster.
Single-walled drawer system MultiTech
1367Technik für Möbel
Range summary 1368 - 1369
Assembly machinery Summary 2724 - 2725
Technical Information Planning dimensions 1387 - 1391 / 1396 - 1400 Assembly / adjustment / removal 1392 - 1395 Quality criteria 1454
Single-walled drawer system MultiTechSummary
1368 www.hettich.com
Drawer, height 54 mm 1370 - 1371
Drawer, height 86 mm 1372 - 1373
Internal drawer, height 86 mm 1372 - 1373
Drawer, height 118 mm 1374 - 1375
Internal drawer, height 118 mm 1374 - 1375
Drawer, height 150 mm 1376 - 1377
Internal drawer, height 150 mm 1376 - 1377
Drawer, height 214 mm 1378 - 1379
Pot-and pan drawer with railing / crosswise railing 1380
Upgrade set for over extension 1381
Silent System soft closure 1382
Internal organisation system for Drawers
1383
Single-walled drawer system MultiTechRange summary
1369Technik für Möbel
Hanging file frame set / central locking
1384
Accessories
1385 - 1386
Single-walled drawer system MultiTechRange summary
1370 www.hettich.com
Components
1 Drawer set 2 Drawer front connector for side profile Optional accessories: 3 Silent System soft closure
A Front B Bottom panel (material thickness 16 mm) C Wooden rear panel (material thickness 16 mm)
A
B
C
1
2
3
AdviceFor technical information, see page 1387, 1392 - 1395
25 kg loading capacity to EN 15338, Level 2
Set comprises: 1 set drawer profile 1 set carcase member, partial extension
Nominal length Order no. PUWhite Grey
250 9 127 861 9 127 862 1/10 set
275 9 127 863 9 127 864 1/10 set
350 9 127 865 9 127 866 1/10 set
400 9 127 867 9 127 868 1/10 set
450 9 127 869 9 127 870 1/10 set
500 9 127 871 9 127 872 1/10 set
550 9 127 873 9 127 874 1/10 set
1 Drawer set
Single-walled drawer system MultiTechDrawer, height 54 mmSteel, powder-coated
1371Technik für Möbel
HettCAD
Die-cast zinc nickel-plated
Mounting option Order no. PU
Screw-on type 0 079 174 1/10 pair
Press-in type 0 079 173 1/10 pair
2 Drawer front connector for side profile
Easy to install, even at a later stage For use on the right-hand side, or
on both sides in cabinets in widths of 900 mm and over
Order 2 sets if used on both sides
Set comprises: 1 soft-closing unit, grey plastic 1 activator, white plastic 1 activator, grey plastic Fixing material
Order no. PU
9 137 935 1/10 set
3 Silent System soft closure
Single-walled drawer system MultiTechDrawer, height 54 mmSteel, powder-coated
Lengthwise cross-section
12837
16
9
EL
b1 b2 b3
ø 3,5 ø 6,3
37
or
= minimum number of screw-fixing positions
Drawer
Nominal length
Min. carcase depth
Nominal length mm Hole spacing b1 mm Hole spacing b2 mm Hole spacing b3 mm Extension loss EL mm
Minimum carcase depth drawer
250 64 85 260
275 96 85 285
350 96 64 85 360
400 96 96 32 85 410
450 96 128 32 95 460
500 96 128 64 100 510
550 96 128 128 110 560
1372 www.hettich.com
Components
1 Drawer set 2 Front connector for drawer, 2 each Optional accessories: 3 Cover cap, 1 set or 2 each 5 Silent System soft closure
Alternatively: 4 Front connectors for internal drawer
A Front B Bottom panel (material thickness 16 mm) C Rear panel (material thickness 16 mm) D Front for internal drawer (material thickness 16 mm)
B
C
4
D
A2
3
1
5
AdviceFor technical information, see page 1388, 1392 - 1395
25 kg loading capacity to EN 15338, Level 2
Set comprises: 1 set drawer profile 1 set carcase member, partial extension
Nominal length Order no. PUWhite Grey
250 9 127 875 9 127 876 1/10 set
275 9 127 877 9 127 878 1/10 set
350 9 127 879 9 127 880 1/10 set
400 9 127 881 9 127 882 1/10 set
450 9 127 883 9 127 884 1/10 set
500 9 127 885 9 127 886 1/10 set
550 9 127 887 9 127 888 1/10 set
1 Drawer set
Single-walled drawer system MultiTechDrawer / internal drawer, 86 mm heightSteel, powder-coated
1373Technik für Möbel
HettCAD
Steel nickel-plated
Mounting option Order no. PU
Screw-on type 0 054 997 1/20 ea.
Press-in type 0 054 998 1/20 ea.
With expanding socket 0 051 477 1/20 ea.
2 Drawer front connector for side profile
Plastic
Finish Order no. PU
White with Hettich logo 9 096 745 1/10 set
White 0 046 096 1/20 ea.
Grey with Hettich logo 9 096 746 1/10 set
Grey 0 046 097 1/20 ea.
3 Cover cap
Plastic
Order no. PUWhite Grey0 051 487 0 051 488 1/10 set
4 Front connectors for internal drawer
Easy to install, even at a later stage For use on the right-hand side, or
on both sides in cabinets in widths of 900 mm and over
Order 2 sets if used on both sides
Set comprises: 1 soft-closing unit, grey plastic 1 activator, white plastic 1 activator, grey plastic Fixing material
Order no. PU
9 137 935 1/10 set
5 Silent System soft closure
Single-walled drawer system MultiTechDrawer / internal drawer, 86 mm heightSteel, powder-coated
ø 3,5 ø 6,3
37
12837
16
9
EL
b1 b2 b3
37=minimum number of screw-fixing positions
Drawer
Internal drawer
Nominal length
Min. carcase depth
or
Nominal length mm Hole spacing b1 mm
Hole spacing b2 mm
Hole spacing b3 mm
Extension loss EL mm
Minimum carcase depth drawer
Minimum carcase depth internal drawer
250 64 85 260 269
275 96 85 285 294
350 96 64 85 360 369
400 96 96 32 85 410 419
450 96 128 32 95 460 469
500 96 128 64 100 510 519
550 96 128 128 110 560 569
Lengthwise cross-section
1374 www.hettich.com
Components
1 Drawer set 2 Front connector for drawer, 2 each Optional accessories: 3 Cover cap, 1 set or 2 each 5 Silent System soft closure
Alternatively: 4 Front connectors for internal drawer
A Front B Bottom panel (material thickness 16 mm) C Rear panel (material thickness 16 mm) D Front for internal drawer (material thickness 16 mm)
B
C
D
A4
23
1
5
AdviceFor technical information, see page 1389, 1392 - 1395
25 kg loading capacity to EN 15338, Level 2
Set comprises: 1 set drawer profile 1 set carcase member, partial extension
Nominal length Order no. PUWhite Grey
250 9 127 889 9 127 890 1/10 set
275 9 127 891 9 127 892 1/10 set
350 9 127 893 9 127 894 1/10 set
400 9 127 895 9 127 896 1/10 set
450 9 127 897 9 127 898 1/10 set
500 9 127 899 9 127 900 1/10 set
550 9 127 901 9 127 902 1/10 set
1 Drawer set
Single-walled drawer system MultiTechDrawer / internal drawer, 118 mm heightSteel, powder-coated
1375Technik für Möbel
HettCAD
Steel nickel-plated
Mounting option Order no. PU
Screw-on type 0 054 997 1/20 ea.
Press-in type 0 054 998 1/20 ea.
With expanding socket 0 051 477 1/20 ea.
2 Front connector
Plastic
Finish Order no. PU
White with Hettich logo 9 096 745 1/10 set
White 0 046 096 1/20 ea.
Grey with Hettich logo 9 096 746 1/10 set
Grey 0 046 097 1/20 ea.
3 Cover cap
Plastic
Order no. PUWhite Grey0 051 489 0 051 490 1/10 set
4 Front connectors for internal drawer
Easy to install, even at a later stage For use on the right-hand side, or
on both sides in cabinets in widths of 900 mm and over
Order 2 sets if used on both sides
Set comprises: 1 soft-closing unit, grey plastic 1 activator, white plastic 1 activator, grey plastic Fixing material
Order no. PU
9 137 935 1/10 set
5 Silent System soft closure
Single-walled drawer system MultiTechDrawer / internal drawer, 118 mm heightSteel, powder-coated
ø 3,5 ø 6,3
37
37
12837
16
9
EL
b1 b2 b3
Drawer
Internal drawer
= minimum number of screw-fixing positions
Nominal length
Min. carcase depth
or
Nominal length mm Hole spacing b1 mm
Hole spacing b2 mm
Hole spacing b3 mm
Extension loss EL mm
Minimum carcase depth drawer
Minimum carcase depth internal drawer
250 64 85 260 269
275 96 85 285 294
350 96 64 85 360 369
400 96 96 32 85 410 419
450 96 128 32 95 460 469
500 96 128 64 100 510 519
550 96 128 128 110 560 569
Lengthwise cross-section
1376 www.hettich.com
Components
1 Drawer set 2 Front connector for drawer, 2 each Optional accessories: 3 Cover cap, 1 set or 2 each 5 Silent System soft closure
Alternatively: 4 Front connectors for internal drawer
A Front B Bottom panel (material thickness 16 mm) C Rear panel (material thickness 16 mm) D Front for internal drawer (material thickness 16 mm)
B
C
D
A4
23
1
5
AdviceFor technical information, see page 1390, 1392 - 1395
25 kg loading capacity to EN 15338, Level 2
Set comprises: 1 set drawer profile 1 set carcase member, partial extension
Nominal length Order no. PUWhite Grey
250 9 127 903 9 127 904 1/10 set
275 9 127 905 9 127 906 1/10 set
350 9 127 907 9 127 908 1/10 set
400 9 127 909 9 127 910 1/10 set
450 9 127 911 9 127 912 1/10 set
500 9 127 913 9 127 914 1/10 set
550 9 127 915 9 127 916 1/10 set
1 Drawer set
Single-walled drawer system MultiTechDrawer / internal drawer, 150 mm heightSteel, powder-coated
1377Technik für Möbel
HettCAD
Steel nickel-plated
Mounting option Order no. PU
Screw-on type 0 054 997 1/20 ea.
Press-in type 0 054 998 1/20 ea.
With expanding socket 0 051 477 1/20 ea.
2 Drawer front connector for side profile
Plastic
Finish Order no. PU
White with Hettich logo 9 096 745 1/10 set
White 0 046 096 1/20 ea.
Grey with Hettich logo 9 096 746 1/10 set
Grey 0 046 097 1/20 ea.
3 Cover cap
Plastic
Order no. PUWhite Grey0 051 491 0 051 492 1/10 set
4 Front connectors for internal drawer
Easy to install, even at a later stage For use on the right-hand side, or
on both sides in cabinets in widths of 900 mm and over
Order 2 sets if used on both sides
Set comprises: 1 soft-closing unit, grey plastic 1 activator, white plastic 1 activator, grey plastic Fixing material
Order no. PU
9 137 935 1/10 set
5 Silent System soft closure
Single-walled drawer system MultiTechDrawer / internal drawer, 150 mm heightSteel, powder-coated
ø 3,5 ø 6,3
37
37
12837
16
9
EL
b1 b2 b3
Nominal length
Min. carcase depth
Drawer
Internal drawer
or
=minimum number of screw-fixing positions
Nominal length mm Hole spacing b1 mm
Hole spacing b2 mm
Hole spacing b3 mm
Extension loss EL mm
Minimum carcase depth drawer
Minimum carcase depth internal drawer
250 64 85 260 269
275 96 85 285 294
350 96 64 85 360 369
400 96 96 32 85 410 419
450 96 128 32 95 460 469
500 96 128 64 100 510 519
550 96 128 128 110 560 569
Lengthwise cross-section
1378 www.hettich.com
Components
1 Drawer set 2 Front connector for drawer, 2 each Optional accessories: 3 Cover cap, 1 set or 2 each 4 Silent System soft closure
A Front B Bottom panel (material thickness 16 mm) C Rear panel (material thickness 16 mm) D Front for internal drawer (material thickness 16 mm)
B
C
A
2
3
1
4
AdviceFor technical information, see page 1391, 1392 - 1395
25 kg loading capacity to EN 15338, Level 2
Set comprises: 1 set drawer profile 1 set carcase member, partial extension
Nominal length Order no. PUWhite Grey
350 9 127 917 9 127 918 1/5 set
400 9 127 919 9 127 920 1/5 set
450 9 127 921 9 127 922 1/5 set
500 9 127 923 9 127 924 1/5 set
550 9 127 925 9 127 926 1/5 set
1 Drawer set
Single-walled drawer system MultiTechDrawer, height 214 mmSteel, powder-coated
1379Technik für Möbel
HettCAD
Steel nickel-plated
Mounting option Order no. PU
Screw-on type 0 054 997 1/20 ea.
Press-in type 0 054 998 1/20 ea.
With expanding socket 0 051 477 1/20 ea.
2 Drawer front connector for side profile
Plastic
Finish Order no. PU
White with Hettich logo 9 096 745 1/10 set
White 0 046 096 1/20 ea.
Grey with Hettich logo 9 096 746 1/10 set
Grey 0 046 097 1/20 ea.
3 Cover cap
Easy to install, even at a later stage For use on the right-hand side, or
on both sides in cabinets in widths of 900 mm and over
Order 2 sets if used on both sides
Set comprises: 1 soft-closing unit, grey plastic 1 activator, white plastic 1 activator, grey plastic Fixing material
Order no. PU
9 137 935 1/10 set
4 Silent System soft closure
Single-walled drawer system MultiTechDrawer, height 214 mmSteel, powder-coated
12837
16
9
ø 3,5 ø 6,3
EL
b1 b2 b3
37
Nominal length
Min. carcase depth
or
= minimum number of screw-fixing positions
Drawer
Nominal length mm Hole spacing b1 mm Hole spacing b2 mm Hole spacing b3 mm Extension loss EL mm
Minimum carcase depth drawer
350 96 64 85 360
400 96 96 32 85 410
450 96 128 32 95 460
500 96 128 64 100 510
550 96 128 128 110 560
Lengthwise cross-section
1380 www.hettich.com
HettCAD
Components
1 Lengthwise railing Optional: 2 Crosswise railing 3 Mount for crosswise railing, 2 each
2
3
1
Drawer sets in heights of 86, 118 and 150 mm can be combined with the railing set for pot-and-pan drawers
AdviceFor technical information, see page 1396
Set comprises: 2 railing bars 2 front connectors with
expanding dowel
Nominal length Order no. PUWhite Grey
350 0 051 421 0 051 422 1/10 set
400 0 051 426 0 051 427 1/10 set
450 0 051 481 0 051 482 1/10 set
500 0 051 483 0 051 484 1/10 set
550 0 051 485 0 051 486 1/10 set
1 Lengthwise railing
Single-walled drawer system MultiTechPot-and pan drawer with railing / crosswise railingSteel, powder-coated
For cutting to size Length 1100 mm
Order no. PUWhite Grey9 081 054 9 081 055 1/5 ea.
2 Crosswise railing
Plastic
Order no. PUWhite Grey9 078 355 9 078 356 1/40 ea.
3 Mount for crosswise railing
1381Technik für Möbel
HettCAD
Components
1 Upgrade set for over extension
1
Drawer sets in heights of 86, 118, 150 and 214 mm can be upgraded into over-extending drawers using this set
The carcase rails supplied with the drawer set must be replaced with the rails provided in the upgrade set
AdviceFor technical information, see page 1397
30 kg loading capacity to EN 15338, Level 2
Set comprises: 1 set carcase member 1 set centre profile 1 set safety device to prevent
unhinging
Nominal length Order no. PUWhite Grey
350 0 051 478 0 051 479 1/10 set
400 0 051 409 0 051 410 1/10 set
450 0 051 411 0 051 412 1/10 set
500 0 051 413 0 051 414 1/10 set
550 0 051 415 0 051 416 1/10 set
1 Upgrade set for over extension
Single-walled drawer system MultiTechUpgrade set for over extensionSteel, powder-coated
1382 www.hettich.com
HettCAD
Components
1 Silent System soft closure
1
Easy to install, even at a later stage For use on the right-hand side, or on both sides in cabinets in widths
of 900 mm and over
AdviceFor technical information, see page 1398
Order 2 sets if used on both sides
Set comprises: 1 soft-closing unit, grey plastic 1 activator, white plastic 1 activator, grey plastic Fixing material
Order no. PU
9 137 935 1/10 set
1 Silent System soft closure
Single-walled drawer system MultiTechSilent System soft closure
1383Technik für Möbel
HettCAD
Variable in width For nominal lengths of 450 and 500 mm White plastic
OrgaTray 650
Nominal width mm Width mm Order no. PU
300 mm 200 - 240 0 044 924 1/10 ea.
350 mm 250 - 290 0 044 923 1/10 ea.
400 mm 300 - 340 0 044 922 1/10 ea.
450 mm 350 - 390 0 044 921 1/10 ea.
500 mm 400 - 440 0 044 919 1/10 ea.
600 mm 500 - 540 0 044 918 1/10 ea.
Partitioning
300 350 400 450 500 600
200 - 240 250 - 290 300 - 340 350 - 390 400 - 440 500 - 540
D
433 -
483
NB
W
D = Depth W = Width NB = Nominal width
Dimensions for cutting to size Trimmed width (B) = LB - 31 Trimmed depth = Nominal length - 17 (for 16 mm rear panel)
LB
16 ±1
50
15
B
Single-walled drawer system MultiTechInternal organisation for drawers
1384 www.hettich.com
HettCAD
Components
1 Hanging file frame set Optional: 2 Locking bar 3 Locking stop or locking device 4 Cylinder cam lock
2
4
3
1
MultiTech drawer sets with side profile heights of 86, 118 and 150 mm can be used with the hanging file frame set for office applications.
For drawer lengths of 400, 450, 500 and 550 mm Optional use of a central lock with
a) locking stop: locking only b) locking device: locking and anti-tilt block
AdviceFor technical information, see page 1399 - 1400
Set comprises: 2 file cradle profiles,
steel nickel-plated 4 adapters for file frame profiles,
left / right, grey plastic
Nominal length Order no. PU
400 0 051 495 1 set
450 0 051 497 1 set
500 0 051 499 1 set
550 0 051 501 1 set
1 Hanging file frame set
Single-walled drawer system MultiTechHanging file frame set / central locking
Set comprises: 1 locking bar, length 1000 mm 5 adjustable pins for up to
5 drawer sets 1 bar guide
Order no. PU
0 051 500 1 set
2 Locking bar
Locking stop: locking only Locking device: locking and anti-tilt
block Plastic grey
Article name Order no. PU
Locking stop 0 051 496 1/10 ea.
Locking device 0 051 498 1/10 ea.
3 Locking stop / locking device
Diameter: 18 mm Including rosette Barrel cylinder must be ordered
separately, see page 2208Order no. PU
0 013 337 1 ea.
4 Cylinder cam lock
1385Technik für Möbel
HettCAD
Spacer profiles
For bridging the door / hinge protrusion Plastic white
25 / 12
Width x depth x height mm Order no. PU
25 x 484 x 49 0 013 952 1 ea.
12 x 484 x 49 9 115 956 1 ea.
Spacer discs
For bridging the door / hinge protrusion To span greater distances, several spacer discs can be clipped together Plastic white
Distance Order no. PU
3.0 0 033 681 1/100 ea.
4.0 0 033 682 1/100 ea.
5.0 0 033 683 1/100 ea.
Direct fixing screws
For attaching the carcase rail Shallow countersunk head Pozidrive screw Steel, nickel-plated
Chipboard screw, countersunk head
For attaching the carcase rail as well as the front connectors for drawer and internal drawer
Pozidrive screw Steel, nickel-plated
Dimensions Order no. PU
ø 3.5 x 12 9 079 791 200 ea.
ø 3.5 x 16 0 071 925 200 ea.
Dimensions Order no. PU
ø 6.3 x 10.5 0 051 264 200 ea.
ø 6.3 x 14 0 051 265 200 ea.
Single-walled drawer system MultiTechAccessories
1386 www.hettich.com
HettCAD
Chipboard screw, pan head
For attaching the drawer base as well as the wooden rear panel Pozidrive screw Steel, nickel-plated
Dimensions Order no. PU
ø 4 x 12 0 058 243 200 ea.
Press-in buffer
For hole ø 5 x 5.5 mm Transparent plastic
ø 8
1,5
ø 5
5,5
Order no. PU
9 079 298 1/1000 ea.
Press-in buffer
For hole ø 6 x 7 mm Plastic
ø 8
1,5
ø 6
7
Colour Order no. PU
White 0 025 048 1/1000 ea.
Brown 0 021 154 1/1000 ea.
Beige 0 047 353 1/1000 ea.
Stick-on buffer
Self-adhesive Transparent plastic
1,7
ø 8
Order no. PU
0 072 120 50 ea.
0 046 695 1000 ea.
Single-walled drawer system MultiTechAccessories
1387Technik für Möbel
3A
NL
Planning dimensions
18,5
9ø 4 x 12
2 x
32
8,5
ø 2,5ø 10 x 12,5
15
8
40,54983
16±1 ø 4 x 12
ø 3,5 ø 6,3
16
39
≥ 24
12
≥ 10
Hole position frontconnectors drawer
Hole position roller runner /minimum installation height
Hole position rear panel
Dimensions for cutting to size
B
LB
C
D
A
NL
NH
LT
Dimension DrawerA NL - 3
B LB - 31
C LB - 31
D 39
LT ≥ (NL + 10)
Single-walled drawer system MultiTechDrawer, height 54 mmTechnical Information
1388 www.hettich.com
3A
NL
Planning dimensions
18,5
32
9
3x
ø 4 x 12
2 x
64
8,5
ø 2,5ø 10 x 12,5
15
8
72,581115
16±1 ø 4 x 12
ø 3,5 ø 6,3
16
71
34,5
1871
9
ø 3,5 x 12
2 x
≥ 24
≥ 10
Hole position roller runner /minimum installation height
Hole position rear panel Hole position front connectors drawer
Hole position front connector internal drawer
Dimensions for cutting to size
B
LB
C
D
A
NL
F
E NH
LT
Dimension Drawer Internal drawerA NL - 3 NL - 19
B LB - 31 LB - 31
C LB - 31 LB - 31
D 71 71
E - LB - 57
F - 71
LT ≥ (NL + 10) ≥ (NL + 19)
Single-walled drawer system MultiTechDrawer, height 86 mmTechnical Information
1389Technik für Möbel
3A
NL
Planning dimensions
18,5
64
9
3x
ø 4 x 12
2 x
64
40,5
ø 2,5ø 10 x 12,5
15
8
72,5
113147
16±1 ø 4 x 12
ø 3,5 ø 6,3
16
103
34,5
48
103
9
ø 3,5 x 12
2 x
≥ 24
≥ 10
Hole position roller runner /minimum installation height
Hole position rear panel Hole position front connectors drawer
Hole position front connector internal drawer
Dimensions for cutting to size
B
LB
C
D
A
NL
F
E NH
LT Dimension Drawer Internal drawerA NL - 3 NL - 19
B LB - 31 LB - 31
C LB - 31 LB - 31
D 103 103
E - LB - 57
F - 103
LT ≥ (NL + 10) ≥ (NL + 19)
Single-walled drawer system MultiTechDrawer, height 118 mmTechnical Information
1390 www.hettich.com
3A
NL
Planning dimensions
18,5
96
9
3x
ø 4 x 12
2 x
64
72,5
ø 2,5ø 10 x 12,5
15
8
72,5
145179
16±1 ø 4 x 12
ø 3,5 ø 6,3
16
135
52,5
64
135
9
ø 3,5 x 12
2 x
≥ 24
≥ 10
Hole position roller runner /minimum installation height
Hole position rear panel Hole position front connectors drawer
Hole position front connector internal drawer
Dimensions for cutting to size
B
LB
C
D
A
NL
F
E
NH
LT Dimension Drawer Internal drawerA NL - 3 NL - 19
B LB - 31 LB - 31
C LB - 31 LB - 31
D 135 135
E - LB - 57
F - 135
LT ≥ (NL + 10) ≥ (NL + 19)
Single-walled drawer system MultiTechDrawer, height 150 mmTechnical Information
1391Technik für Möbel
3A
NL
Planning dimensions
18,5
96
64
9
3x
ø 4 x 12
3 x
64
136,5
ø 2,5ø 10 x 12,5
64
15
8
ø 3,5
72,5
209243
16±1 ø 4 x 12
ø 3,5 ø 6,3
16
199
≥ 24
≥ 10
Hole position roller runner /minimum installation height
Hole positionfront connectors drawer
Hole position rear panel
Dimensions for cutting to size
B
LB
C
D
LT NL
A
NH
Dimension DrawerA NL - 3
B LB - 31
C LB - 31
D 199
LT ≥ (NL + 10)
Single-walled drawer system MultiTechDrawer, height 214 mmTechnical Information
1392 www.hettich.com
Assembling drawer
ø 4 x 12 4 x
ø 4 x 12 4 x
Fitting front panel, drawer, height 54 mm
ø 3,5 x 12 4 x
ø 2,5 ø 10 x 12,5
Single-walled drawer system MultiTechInstallation, adjustment, Removal
1393Technik für Möbel
Fitting front panel, drawer, height 86 - 214 mm
ø 2,5
ø 3,5 x 12 4 x
ø 10 x 12,5
ø 10 x 12,5
Fitting front panel, internal drawer
ø 3,5 x 12 4 xø 2,5
Single-walled drawer system MultiTechInstallation, adjustment, Removal
1394 www.hettich.com
ø 3,5 ø 6,3
Fitting drawer runner Fitting drawer
Adjusting front panel, drawer, height 54 mm
± 1,1 mm
± 1,25 mm
Adjusting front panel, drawer, height 86 - 214 mm
± 1,5 mm± 2 mm
Extension is stopped by the first notch
Pull-out stop
The integrated double stop, second notch, engages the drawer in the front position
Double stop
Single-walled drawer system MultiTechInstallation, adjustment, Removal
1395Technik für Möbel
Removing drawer
Removing front panel, drawer, height 54 mm
Removing front panel, drawer, height 86 - 214 mm
45°
Removing front panel, internal drawer
Single-walled drawer system MultiTechInstallation, adjustment, Removal
1396 www.hettich.com
Planning dimensions, railing set / crosswise railing
18,5
9
32
12,5
RW
ø 3,5 x 12 2 x
ø 4 x 12 2 x
Z
16
8
64
ø 2,5ø 10 x 12,5
ø 10 x 12,5
6,5
X
YRPmm
86 ≥ 135
≥ 167
≥ 199
Xmm
8.5
40.5
72.5
Ymm
118
150
RW + 16 - 6.5
RW + 16 - 6.5
RW + 16 - 6.5
Zmm
32
64
96
Panel Rear panel
Heightmm
Assembly, railing set / crosswise railing
ø 3,5 x 12 4 x
LB - 38
Adjusting drawer front, railing set / crosswise railing
Single-walled drawer system MultiTechRailing set / crosswise railingTechnical information
1397Technik für Möbel
Planning dimensions, upgrade set for over extension
16
199
177
243
ø 3,5 ø 6,3
ø 4 x 12
16
135
113
179
ø 4 x 12
ø 3,5 ø 6,3
15
16
103
81
147
ø 3,5 ø 6,3
ø 4 x 1216±1
1649
115
ø 3,5 ø 6,3
ø 4 x 1216±1
> 56_
71
> 10_
> 56_
> 10_
> 56_
> 10_
> 56_
> 10_
15
Height 86 Height 118 Height 150 Height 214
Installation, upgrade set for over extension
Single-walled drawer system MultiTechUpgrade set for Over-extension runnerTechnical Information
1398 www.hettich.com
Planning dimensions, Silent System soft-closing mechanism
1516 ± 1
HX
ø 3,5 x 25
2 x
ø 4 x 12
2 x
< 900_
1516
H X
ø 3,5 x 25
2 x
ø 4 x 12
2 x
ø 3,5 x 25
2 x
ø 4 x 12
2 x
> 900
37 224
>10_
H54 32
64
96
86
118
128150
192
-
32
64
96
160214
≥ 16 ≥ 16 ≥ 16≥ 16
± 1
Heightmm
Dimension Hpartial extension slide
Dimension Hover extension runner
Installation, Silent System soft-closing mechanism, carcase width ≤ 900 mm
ø 2,5
ø 2,5
ø 5 ø 3,5 x 25
2 x
ø 4 x 12
2 x
Installation, Silent System soft-closing mechanism, carcase width > 900 mm
ø 2,5
ø 2,5
ø 2,5
ø 2,5
ø 5 ø 3,5 x 252 x
ø 4 x 12
2 x
Single-walled drawer system MultiTechSilent System soft closureTechnical Information
1399Technik für Möbel
Planning dimensions, hanging file frame set
8
32ø 3,5 x 16 2 x
32
9,5
16,5
26
56,2
32,5
ø 4
K + 32
R
21
9,514,2
ø 3,5 x 12 2 x
16
K (≥ L + 19)
L
M
Panel Rear panel
RP + 6,5RP ≥ M + 14,5
Assembly, hanging file frame set
Single-walled drawer system MultiTechHanging file frame setTechnical Information
1400 www.hettich.com
Planning dimensions, central locking
18,5
37
29
3287
1000
20
19
ø 7
207
10
18,5
ø 19
16
G
86 76,5
108,5
140,5
118
150
44,5
76,5
108,5
Heightmm
Dimension Gpartial extension slide
Dimension Gover extension runner
Installation, locking bar
Installation, locking device / locking stop
ø 4,5 x 16 2 x
Single-walled drawer system MultiTechCentral lockingTechnical Information