Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
NEW!
SECURE RADIO TRANSMISSIONMEMORY FUNCTION
WIRELESS CHARGING SYSTEMROBUST AND WATERPROOF
AUTOMATIC DISPLAY ORIENTATION
ACCEPTS THE MOST POPULARMECHANICAL GAUGE HEADS
SIMPLYBRILLIANT!
Battery level
ABS/REL option Measuring unitMeasurement value
Bargraph view
Wireless power level
Confirmation of measurement transmission
Good / Scrap indication
PORTRAIT LANDSCAPE
iWave2 is compatible with Marposs mechanical gauge heads like M1Star and M3Star and with gauge headsmade by third parties (such as Diatest, Hexacon,Schwenk, Mahr-Federal). This compatibility indication is related to the issue date of this document,
published on May 2015. The effective application of this compatibility is subject to a previous verification by Marposs personnel.
Specifications are subject to modifications - © Copyright 2015 MARPOSS S.p.A. (Italy) - All rights reserved.
Display 1,8" full color
Ergonomic handle design Twin push buttons
Able to work stand alone 4
Able to work connected with gauge computers 4
Communication distance 10 m
IP Rating 67
Weight 540 g
Battery Type Li-Ion Rechargeable
Battery Duration in continuous use 16 h *
Full charging time (0% to 100%) 5 - 6 h
Wireless charging system Inductive
Switch on/off commanded by guided sequence 4
Calibration history 4
Simultaneous zeroing of multiple devices 4
Resolution 0,0001 mm
Linearity deviation 0,0003 mm over 5 mm travel
Programming for stand alone use by Android phone/tablet or PC
Auto switch on by accelerometer
View display aspect Portrait / Landscape-selectable
Features
Performances
Battery
* The duration of the batteries can be further increased setting programmable auto-shutdown option
The innovative iWave2 wireless handle, with its integrated 1.8” TFT color screen, displays the measurement value in the operator’s hand. All Marposs mechanical gauge heads, like M1 Star bore gauges and M3 Star snap gauges, can be attached to the handle and the information is transmitted wirelessly to Marposs gauge computers. The ergonomic handle design, with twin push buttons, diplay orientation mode, gauge stand with the onboard recharging wireless system, offers the perfect partnership for your dimensional inspection use in today’s workshop. Communication software, developed by MARPOSS, gives users the opportunity to connect the iWave2 to any commercial computer.
Software features in association with Marposs Quick SPC
iWave2 is compatible with Marposs mechanical gauge heads like M1Star and M3Star and with gauge headsmade by third parties (such as Diatest, Hexacon,Schwenk, Mahr-Federal). This compatibility indication is related to the issue date of this document,
published on May 2015. The effective application of this compatibility is subject to a previous verification by Marposs personnel.
Specifications are subject to modifications - © Copyright 2015 MARPOSS S.p.A. (Italy) - All rights reserved.