Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Simatec Maschinenbau AGFilter press for cement sludge dewatering
Filter press type KFP-A 630-13/13-C35-8-S1-C
This filter press is equipped with specially designed filter plates and a system with fully automatic valves in order to keep the filter and all pipes permanently under water – even if no filtration cycle is underway.
This prevents the cement from hardening within the filter press and pipes, and therefore prevents the filter press from any kind of clogging.
The filter press is fed by either an air-driven or electrical membrane pump.
Process parametersType of sludge: ....................................................................Washing water from concrete mixersAmount of solids in suspension: ..............................10 - 20 g/l (indicative)Dry solid substance of filter cake: ............................40 - 50 M.-% (indicative)Density of filter cake: ........................................................1,25 kg/dm (indicative)Duration of one filtration cycle: ..................................15 - 30 min (indicative)Preconditioning of sludge: ............................................none
Specifications Size of plate: 630 mm x 630 mmFilter capacity: 96 dm3Filtration area: 6.9 m2Cake thickness: 30 mmNumber of plates: 11 + 2Filtration pressure: 8 barClosing pressure: 315 barTotal weight: 2‘400 kg
For a mobile application on construction sites, the filter press can be installed within a 20-feet con-tainer.
Simatec Maschinenbau AG
Sales and Administration:Technikumstrasse 16048 HorwSchweiz
Construction and Production:Lochackerweg 23302 MoosseedorfSchweiz
Fon: +41 41 349 40 30Fax: +41 41 349 40 31Mail: [email protected]: www.simatec.org