Upload
waves-communications
View
224
Download
0
Embed Size (px)
Citation preview
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 1/46
Simado SMS1000
User’s Guide
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 2/46
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 3/46
Simado SMS1000
The Smart Text Messaging Manager
User’s Guide
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 4/46
Documentation Disclaimer
Matrix Telecom reserves the right to make changes in the design or components of the product as engineering
and manufacturing may warrant. Specifications are subject to change without notice.
This is a general documentation for all models of the product. The product may not support all the features andfacilities described in the documentation.
Information in this documentation may change from time to time. Matrix Telecom reserves the right to revise
information in this publication for any reason without prior notice. Matrix Telecom makes no warranties with
respect to this documentation and disclaims any implied warranties. While every precaution has been taken in
the preparation of this user’s guide, Matrix Telecom assumes no responsibility for errors or omissions. Neither is
any liability assumed for damages resulting from the use of the information contained herein.
Neither Matrix Telecom nor its affiliates shall be liable to the purchaser of this product or third parties for
damages, losses, costs or expenses incurred by the purchaser or third parties as a result of: accident, misuse or
abuse of this product or unauthorized modifications, repairs or alterations to this product or failure to strictly
comply with Matrix Telecom's operating and maintenance instructions.
Copyright
All rights reserved. No part of this user’s guide may be copied or reproduced in any form or by any means
without the prior written consent of Matrix Telecom.
Version 1.1
Release date: February 10, 2009
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 5/46
Contents
Copyright ................................................................................................................................................4
Introduction ................................................................................................................................................7
Organization of this document ................................................................................................................7
Conventions used in this User’s Guide ...................................................................................................7
Knowing Simado SMS1000 .......................................................................................................................9
Getting Started .........................................................................................................................................11
Features of Simado SMS1000 .................................................................................................................21
Home ....................................................................................................................................................21
INBOX ..................................................................................................................................................22
OUTBOX ..............................................................................................................................................28
SENTBOX ............................................................................................................................................28
ADDRESS BOOK .................................................................................................................................29
SEND SMS ...........................................................................................................................................35
TEMPLATE ...........................................................................................................................................39
CONFIGURATION ...............................................................................................................................42
Appendices ..............................................................................................................................................43
Index ..........................................................................................................................................................45
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 6/46
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 7/46
Matrix Simado SMS1000 V1.1 User’s Guide 7
CHAPTER 1 Introduction
Welcome!
Welcome to the world of Short Messaging Services (SMS). Thank You for choosing Simado SMS1000 for Short
Messaging Services. Simado SMS1000 is the easiest solution to use and manage the needs of your Messaging
world. We hope you will make optimum use of this intelligent, intuitive, feature-packed software. Please read this
document carefully before installing your Simado SMS1000.
Simado SMS1000 User’s Guide contains detailed information and instructions for installing and using this
software. We have made the best efforts to let you know your SMS software so that it becomes a fun for you to
use it.
Organization of this document
This User’s Guide contains following topics:
Introduction: Gives an overview of this document, its purpose, organization, terms and conventions
used to present information and instructions.
Knowing Simado SMS1000: Helps you to know and understand your SMS software.
Getting Started: Contains information for installing the software.
Features of Simado SMS1000: Contains various features and instructions on using each feature.
Appendices: Contains information such as troubleshooting or FAQs, warranty statement etc.
Conventions used in this User’s Guide
Notes: It indicates something that requires your special attention.
In this user’s guide word 'Simado SMS1000' and 'Software' are used interchangeably.
'Computer' and 'PC' have the same meaning. Also Matrix Simado GDT11/GFXD1111/GFXD1111S
is referred as the 'System'.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 8/46
8 Matrix Simado SMS1000 V1.1 User’s Guide
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 9/46
Matrix Simado SMS1000 V1.1 User’s Guide 9
CHAPTER 2 Knowing Simado SMS1000
Simado SMS1000 is easy to use, powerful PC based SMS software that allows you to send text messages to
individuals or mass of people from your Personal computer to all mobile phones in one single click.
Simado SMS1000 works with all the following Matrix GSM products:
• Matrix Simado GDT11• Matrix Simado GFXD1111
• Matrix Simado GFXD1111S
Simado SMS1000 is very easy to use and can be easily operated without any internet connection. This software
has following features:
• Send unlimited numbers of text messages from your personal computer to mobile phones in a single
click.
• Send quick messages to all your friends, relatives, family members in the most easy and economical
way.
• You can enter addressee's phone number manually or can import address file from your PC. (Address
file in the computer should be stored either in excel format or .CSV file format)
• Supports all Windows Operating System!
• It is easy to use and safe PC to mobile SMS software.
To use this software you require:
• Computer with a CD drive and a COM port.
• GSM modem compatible with the software i.e. either of Matrix Simado GDT11 or GFXD1111 or
GFXD1111S.
• COM port cable.
• SIM Card
• And Power Supply
You can send and receive only text messages using Simado SMS1000. It is easier to type messages and sendit to an individual or a mass of people using this software. Also sending message via software is quicker than
sending it using mobile phone.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 10/46
10 Matrix Simado SMS1000 V1.1 User’s Guide
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 11/46
Matrix Simado SMS1000 V1.1 User’s Guide 11
CHAPTER 3 Getting Started
Installing Simado SMS1000
Matrix Simado SMS1000 works with Simado GDT11/Simado GFXD1111/Simado GFXD1111S. Before installing
Simado SMS1000, you must install any of the above mentioned Simado GSM system. (For installing Simado
GDT11/GFXD1111/GFXD1111S, please refer the respective system manual)
For installing Simado SMS1000, follow the steps given below:
1. Insert Matrix Simado SMS software CD in the CD drive of your computer.
2. Simado SMS1000 software is an auto-run program. Installation starts automatically once you insert the
CD in the CD drive of your computer.
3. If program does not run automatically then: Open 'My Computer' on your desktop J Double-click on the
CD drive to view the contents of the CD J Unzip the zipped file and double-click on the set-up file to
install the software.
4. Windows Installer window will appear on the screen.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 12/46
12 Matrix Simado SMS1000 V1.1 User’s Guide
5. After few seconds, a Set Up wizard will appear on the screen as shown below:
6. Click 'Next' to store the set up files of the software in your PC. By default, it is stored in "C:\Program
Files\MatrixSimadoSMS1000\".
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 13/46
Matrix Simado SMS1000 V1.1 User’s Guide 13
7. If you do not want to store set-up files in above mentioned folder, click on browse button and select
another folder to store the set up files in that folder. Also select an option 'Everyone' if you want
everyone, who uses the computer, to use this software. By default, 'Just me' option is selected.
8. Click 'Next'. Confirm Installation window will appear on the screen.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 14/46
14 Matrix Simado SMS1000 V1.1 User’s Guide
9. Click 'Next' to start installation. Installation will take approximately 2 minutes.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 15/46
Matrix Simado SMS1000 V1.1 User’s Guide 15
10. Click on Close button to close the installation wizard. An icon to open the software appears on the
desktop as shown below:
11. Click on 'Matrix Simado SMS1000' icon. A window for activating license key will appear on the screen.
12. Enter mobile number on which you want to receive 'License Key', in the field for entering mobile
number and click on 'Get License Key' button.
13. After few seconds, you will receive sms containing the license key for registering the software on the
SMS server. Enter this license key in the license key text box and click on 'Activate License Key' button.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 16/46
16 Matrix Simado SMS1000 V1.1 User’s Guide
14. Home Page of Simado SMS1000 software will appear on the screen.
15. Click on 'Configuration' icon and configure the following parameters.
• COM Port Settings: Following configuration for communication ports are recommended for computer
connectivity or programming through computer. You can change these configurations as per your requirement:
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 17/46
Matrix Simado SMS1000 V1.1 User’s Guide 17
• COM Port: By default, COM 1 is selected.
• Bits Per Second: By default, it is 9600.
• Data Bits: By default, it is 8.
• Parity: By default, it is None.
• Stop Bits: By default, it is 1.
• User Signature: Insert you signature in the 'User Signature' box if you want to send your signature with
every message sent. By default, it is blank.
• Time Interval Setting: Select the time after which you want to send and receive messages. By default,
it is 1minute.
This time interval specifies the time interval between two consecutive attempt made by the system to
send and receive the messages.
• Incoming SMS Setting: By default, incoming messages are checked after sending 20 messages.
Select the number of messages after which the software shall check incoming messages in 'Check
Incoming SMSs After Sending XX SMSs' field.
• Click on 'Save' button to save the configuration done by you. To reset the configuration to the default
values, click on 'Reset' button.
16. After doing proper configuration, click on Home Page icon.
17. Click on the 'Click Me' button on the screen to connect the software with either of Simado GDT11/
GFXD1111/GFXD1111S system. When the software is connected to the modem, Modem connectivity
button and 'Click Me' button is turned ON and it appears green in colour. When the software and
modem is not connected, both 'Modem Connectivity' and 'Click Me' buttons are Off and appears red in
colour.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 18/46
18 Matrix Simado SMS1000 V1.1 User’s Guide
18. Simado SMS1000 is now ready for use.
Ensure that no other computer application is using the same COM port, using which the SMS1000 is
connected to the GSM system else error message "COM port is already open" will appear on the
screen while connecting software to the system.
SMS Server Setting
SMS server mobile number is required for activating the license key of the SMS software. You require this
number when you install the software for the first time in your computer. Latest SMS server mobile number is
required every time you install this software on different computers. This number is programmed in the software
but the number might change. You should update SMS server setting to know the latest SMS server mobile
number. SMS server settings can be updated automatically as well as manually.
• To update server mobile number automatically, you should have an active internet connection.
a. Click on 'Configuration' button on the home page of the software and click on 'Update SMS Server
Mobile Number' link.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 19/46
Matrix Simado SMS1000 V1.1 User’s Guide 19
b. SMS server setting window will appear on the screen. Connect your PC to the internet and click on
'Update' button to get latest mobile number from the SMS server.
• To update SMS server mobile number manually, contact the vendor to know the latest SMS server
mobile number.
a. Note down or remember the number given by the vendor and then click on 'Update SMS Server
Mobile Number' link on the configuration page.
b. SMS server setting window will appear on the screen. Select and enable 'Change server settingmanually' option.
c. Enter the mobile number in 'Mobile No of SMS server' filed and click on 'Update' button to update the
SMS server mobile number manually.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 20/46
20 Matrix Simado SMS1000 V1.1 User’s Guide
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 21/46
Matrix Simado SMS1000 V1.1 User’s Guide 21
CHAPTER 4 Features of Simado SMS1000
In the Home page of the software, following icons appear on the left side of the window:
1. Home
2. Inbox
3. Outbox
4. Sentbox5. Address Book
6. Send SMS
7. Template
8. Configuration
Home
Home page of the Simado SMS1000 displays the following parameters:
• Message Summary: Shows total messages in the Inbox as well as Outbox.
• Total SMS in Inbox: Shows total number of messages received.
• Total SMS in Outbox: Shows total number of messages that are pending to be sent.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 22/46
22 Matrix Simado SMS1000 V1.1 User’s Guide
• Message Counter: Shows total number of messages sent successfully. Click on 'Reset Counter' button
to reset the number of sent messages to zero. Message counter displays total messages sent by the
software, unless it is reset to zero. The number of messages in this field does not change if you delete
the messages from 'Sentbox'. It is same as the Message Log of your mobile phone.
• Server Connectivity: Modem connectivity button is turned On and green in color if the software is
connected to the system else it is Off and red in color.
• Modem ON/Off: This parameter is Off and displayed red in color when software and system are not
connected. Turn it On by clicking on 'Click Me' button. It will turn On and green in color as soon as the
system gets connected to the software.
INBOX
Inbox of Simado SMS1000 displays the received messages as shown below:
Inbox displays total five columns:
1. Check Box: This column consists of a check box. You may select the message by clicking this check
box.
2. Fwd: This column shows a symbol (an arrow) as shown above. It indicates that the message has been
forwarded.
3. Mobile No.: This column shows the mobile number of the sender.
4. Message: This column shows the initial part of the message. To view the full message, you may either
double-click the message or select the message and click on 'View' button on the top.
5. Date: This column shows the date and time of the arrival of the message.
Unread messages are displayed in blue fonts. Once the message is viewed by the recipient, its fonts
are turned black.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 23/46
Matrix Simado SMS1000 V1.1 User’s Guide 23
Template: You can save the received messages as a template in the software. To save a message as a
template, select the message and click on 'Template' button. Following message will appear on the screen.
• Click on 'Yes' button. It will ask you to select the category to save the message. Select the category and
click on 'Save' button.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 24/46
24 Matrix Simado SMS1000 V1.1 User’s Guide
• A confirmation message will appear on the screen. Click 'Ok' and message will be saved as a template.
You may select and save multiple messages in the inbox at a time as templates.
• Contact: You can save the contact number of the received messages in your address book. To savethe contact number of incoming messages in your address book, select the message and click on
'Contact' button. Following window will appear on the screen:
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 25/46
Matrix Simado SMS1000 V1.1 User’s Guide 25
• Click on 'Yes' button and contact number of the selected messages will be saved in your Address book.
You may select multiple messages at a time and save contact numbers of all the selected messages in
the address book.
• View: To view the full message received in the Inbox, select the message and click on 'View' button.
Following window will appear on the screen:
• After reading the message, click on 'Cancel' button to go back to the inbox. You may also forward the
read message by clicking on the 'Forward' button.
You can view only one message at a time i.e. if you select multiple messages and click on 'View' button,
only the one in blue strip shall be viewed as shown below:
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 26/46
26 Matrix Simado SMS1000 V1.1 User’s Guide
• Forward: You can also forward the received messages to the desired contact numbers. To forward the
message, click on forward button. Following screen will appear:
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 27/46
Matrix Simado SMS1000 V1.1 User’s Guide 27
• Enter the contact number manually in 'To' field or select the same from the address book to forward the
message. Click on send button and message will be forwarded to the desired numbers.
You can forward only one message at a time i.e. if you select multiple messages and click on 'Forward'
button, only the one in blue strip shall be forwarded.
• Delete: You can delete the messages received in the Inbox. Select the messages that you want to
delete and click on the 'Delete' button. Following window will appear on the screen:
• Click on 'Yes' button to delete all the selected messages. All the selected messages will be deleted.
You may select and delete multiple messages in the inbox at a time.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 28/46
28 Matrix Simado SMS1000 V1.1 User’s Guide
OUTBOX
As soon as a message is sent, it is moved to the Outbox. Successfully sent messages are stored in the Sentbox.
• You can view as well as delete the pending message in the outbox before it is sent. To view or delete
the messages in outbox, select the message and click on the respective button.
SENTBOX
All successfully delivered messages are saved and are displayed in the Sentbox as shown below:
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 29/46
Matrix Simado SMS1000 V1.1 User’s Guide 29
• You can view as well as delete the messages from the Sentbox. To view or delete the message, select
the message and click on the respective button.
ADDRESS BOOK
You can save frequently used contact numbers in the address book of the software. Address book of thesoftware is displayed as under:
• New: To add a new contact number in your address book, click on 'New' button. Following window will
appear on the screen:
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 30/46
30 Matrix Simado SMS1000 V1.1 User’s Guide
• Enter Name, Address, City and Mobile number of the person whose number you want to save in your
address book and click on the save button.
• Group: You can also create a group to send messages quickly to the whole group as and when
required. It makes sending of the messages easier and quicker. To create a group, click on 'Group'
button, following screen will appear:
• Enter the name for the group in the Group Name field. Select the names to be added in the group and
click on '>' button. Click on save button, a confirmation window will appear on the screen as shown
below:
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 31/46
Matrix Simado SMS1000 V1.1 User’s Guide 31
• Click on 'Ok' button. Group will be formed as shown below:
You can also edit the created group by adding or removing the contacts from the group as and when
required by clicking on 'Open' button.
• Delete: You can delete the contact from the address book. Select the contact that you want to deleteand click on delete button, a confirmation window will appear on the screen. Click on 'Yes' button and
the selected contact will be deleted.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 32/46
32 Matrix Simado SMS1000 V1.1 User’s Guide
• You can also delete the whole group by selecting the group and clicking on the delete button. Click on
'Yes' button and the selected group will be deleted.
When you delete the group, only the group formed will be deleted. Contacts in the group shall not be
deleted. But if you delete an individual contact then the same will be removed from the group also if that
individual is member of the group.
• Import: You can also import the contact address from your computer. Only addresses stored in .CSV
and Excel File format can be imported.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 33/46
Matrix Simado SMS1000 V1.1 User’s Guide 33
• Click on Browse button and select the file from which you want to import the contact addresses in your
address book.
• Click 'Ok' button. All the contact numbers from the selected file will be imported in the address book.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 34/46
34 Matrix Simado SMS1000 V1.1 User’s Guide
The file that is to be imported should have minimum four columns and it is mandatory to have name in
the first column and the mobile number in the fourth column. First row of the file should be kept blank. If
the file to be imported is not in the prescribed format then it will not be imported in the software.
• Search: You can search contact by his name, address, city and mobile number. Enter name/address/
city/mobile number in the search field to search the contact. You can also send message to all or one of
the searched contacts. Select the contact and click on Send SMS button to send him a message. Click
on 'Cancel' button to go back.
• Send: You can send message to one or more of the contact saved in the address book. Select the
contacts to which you want to send the messages and click on send button. You can also send
message to the group by selecting the group and clicking on 'Send' button.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 35/46
Matrix Simado SMS1000 V1.1 User’s Guide 35
SEND SMS
Using Simado SMS1000, you can send messages in bulk. Click on Send SMS icon, following page will be
displayed on the screen:
You have following options for sending SMS:
1. Enter destination mobile numbers manually in 'To' field. Type message to be sent in the message field
and click on send button.
2. Click on 'To' button, address book will open up. Select the contacts and click on 'Select' button. Type the
message in the 'Message' field and click on send button.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 36/46
36 Matrix Simado SMS1000 V1.1 User’s Guide
3. Click on 'Import' button. Click on browse button and select the file that is to be imported from your
computer. Also select the column in 'Fields' combo box, in which the mobile numbers are stored. Click
'Ok' button and all the addresses from the selected file will be imported in the 'To' field. Type message in
the message field and click on 'Send' button. Message will be sent to all the imported addresses.
4. You can enter a range of mobile number by clicking on 'Range' button to send message to a group of
people together. This type of services is generally used for marketing purpose. For example to send
message to 100 people whose numbers are in sequence from 9898010000 to 9898010100, click on
'Range' button and enter the numbers in 'From' and 'To' fields and click on 'Ok' button.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 37/46
Matrix Simado SMS1000 V1.1 User’s Guide 37
Type the desired message in the message box and click on 'Send' button.
• Besides this instead of typing message in the message box, you can select a template and send it to
the desired mobile numbers as shown below:
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 38/46
38 Matrix Simado SMS1000 V1.1 User’s Guide
1. In message field, you can type maximum 255 characters. If message length is more than 160
characters, it will be sent in two segments and your service provider will charge you accordingly.
2. You can send message to maximum 1000 mobile numbers at a time.
3. You can save the typed message as a template before sending it so that next time if you want to
send the same message to other destination numbers, you need not to type the message again and
again.
• Send as Flash Message: Select this option to send flash message on the destination mobile number.
Flash messages cannot be stored and it will disappear once the receiver reads the message and click
on the exit button. Maximum length of Flash message is 70 characters only.
• Use Signature: Select this option if you want to send your signature with every message you send.
User Signature is to be saved in the configuration page.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 39/46
Matrix Simado SMS1000 V1.1 User’s Guide 39
• Request for Delivery Report: Select this option if you want delivery report of the message sent. If this
option is selected, you will receive a delivery report as soon the message is delivered on the destination
mobile phone.
TEMPLATE
Click on 'Template' icon to make and store templates that can be used frequently. For example, you can make
and save template of your company's product list so that if you want to send it, you need not to type it again.
To make a template, follow the steps given below:
• Create a category first. Click on 'New' button and enter the category name in the 'Category Name' field
and click on 'Save' button to save it.
• After creating a category, create template. Select category, enter template name and enter the template
message in the message field. Click on 'Save' button to save the template and you may use it as per
your need.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 40/46
40 Matrix Simado SMS1000 V1.1 User’s Guide
1. You can edit category name. Double-click on the category, make required change and then click on
'Save' button.
2. To edit a template, double-click on the template and make the required changes. Click on 'Save'
button to save the changes.
• You can delete a template by selecting the template and clicking on delete button. A message box will
appear on the screen as shown below.
• Click on 'Yes' button, you will get a confirmation message on the screen. Click on 'Ok' button, template
will be deleted.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 41/46
Matrix Simado SMS1000 V1.1 User’s Guide 41
• To delete a category, you should first delete all the templates stored in that category. After deleting
templates, click on delete button above Category List. Following message will appear on the screen:
• Click on 'Yes' button. Confirmation message will appear on the screen. Click on 'Ok' button, category
will be deleted.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 42/46
42 Matrix Simado SMS1000 V1.1 User’s Guide
CONFIGURATION
Click on configuration icon. In configuration page, COM Port Settings, User Signature, Time Interval Settings
and Incoming SMS Settings are displayed.
• COM Port Settings: Following configuration for communication ports are recommended for computer
connectivity or programming through computer. You can change these configurations as per your
requirement:
• COM Port: By default, COM 1 is selected.
• Bits Per Second: By default, it is 9600.
• Data Bits: By default, it is 8.
• Parity: By default, it is None.
• Stop Bits: By default, it is 1.
• User Signature: Insert you signature in the 'User Signature' box if you want to send your signature with
every message. By default, it is blank.
• Time Interval Setting: Select the time after which you want to send and receive messages. By default,
it is 1minute.
This time interval specifies the time period between two consecutive attempt made by the software to
send and receive the messages.
• Incoming SMS Setting: By default, incoming messages are checked after sending 20 messages.
Select the number of messages after which the software shall check for incoming messages in 'Check
Incoming SMSs After Sending XX SMSs' field.
• Click on 'Save' button to save the configuration done by you. To reset the configuration to defaultvalues, click on 'Reset' button.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 43/46
Matrix Simado SMS1000 V1.1 User’s Guide 43
CHAPTER 5 Appendices
A: Trouble Shooting and FAQs
Problem Remedy
Unable to activate the licensekey of the Software
1. Check whether IMEI number of the modem is registered with the SMSsoftware server. (Contact the vendor from whom you have purchased
this software to know the same)
2. Check whether the SMS server mobile number programmed in the
software is the latest one. If not so, update SMS sever settings and try
again.
Unable to connect Simado
SMS1000 to Matrix GSM
system (Simado GDT11/
GFXD1111/ GFXD1111s)
1. Check whether the Matrix GSM system is properly turned On or not. If
not please refer respective system manual and turn it On.
2. Check whether SIM card is present or not. If present check whether it
is active and working properly or not.
3. Check COM Port cable connecting the system and your computer. If it
is not in working condition then change the cable and try again.
4. Check 'COM Port Settings' configuration in the configuration page. You
shall program the same COM port in the 'COM port settings' parameter
using which the system is connected to the computer.
Unable to send and receive
messages
1. Check whether the SIM card is inserted correctly in the system.
2. Check whether the system is working properly or not. If not check the
aerial and COM cable connection.
3. Check whether the SIM is active or not.
Unable to import addresses
in the address book from the
computer
Check the file format, in which addresses are stored in your computer.
To import it in the SMS software, it should be in either Excel file format
or .CSV file format. Also the address file should have minimum four
columns and first and fourth column should consist of Name and
Mobile number respectively.
Maximum number of
messages that can be sent at
a time.
1000
Maximum message length
supported by the system.
255 characters for a normal message and 70 characters for a flash
message.
To operate Simado SMS1000
in a computer having
Operating System VISTA,
carry out following steps.
1. Open the folder in which software set-up files are stored.
2. Right click on 'SendReceive SMS.exe' file and go to its properties.
Click on 'Compatibility' tab and select option 'Run this program as
administrator'.
3. Similarly go to the properties of 'MatrixSimadoSMS.exe' file. Click on
'Compatibility' tab and select option 'Run this program asadministrator'.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 44/46
44 Matrix Simado SMS1000 V1.1 User’s Guide
B: Warranty Statement
Warranty terms and conditions are mentioned in the Installation CD.
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 45/46
Index
A ADDRESS BOOK 29
Delete 31
Group 30
Import 32
New 29
Search 34
CComputer 7
CONFIGURATION 42
COM Port Settings 42
Incoming SMS Setting 42
Time Interval Setting42
User Signature 42
HHome 21
Message Counter 22, 21, 22
Server Connectivity 22
IINBOX 22
Contact 24
Delete 27
Forward 26
Template 23
View 25
Installing Simado SMS1000 11
MMatrix Simado GDT11/GFXD1111/GFXD1111S 7
OOUTBOX 28
PPC 7
S
SEND SMS 35Request for Delivery Report 39
Send as Flash Message 38
Use Signature 38
SENTBOX 28
Simado SMS1000 7
Software 7
System 7
TTEMPLATE 39
7/27/2019 Simado SMS1000 V1 User's Guide
http://slidepdf.com/reader/full/simado-sms1000-v1-users-guide 46/46
0 ,
2 0 0 9
MATRIX TELECOM PVT. LTD.
Corporate Office:
394-GIDC, Makarpura, Vadodara - 390010, India.
Tel.:+91 265 2630555, Fax: +91 265 2636598
E-mail: [email protected]
Factory:
39-GIDC, Waghodia - 391760, Dist. Vadodara, India.
Tel.: +91 2668 262056/57
Technical Support:
T l +91 2668 263172/73 F +91 2668 262631