Simple Safe Assured

SIM FloWellTM

Improving well productivitythrough formation damage removal

NEW P

RODUCT

SIM FloWellTM is a dynamic underbalance system designed to improve productivity by the removal of skin and perforation damage.

SIM FloWell is a slickline deployable system that can be used to create a dynamic underbalance across a pre-determined interval within a monobore / pseudo-monobore completion string.

The system utilises Peak’s unique field proven SIM Plugs as a means of zonal isolation between which the FloWell System is run and activated.

Its modular design offers flexibility and enables varying lengths of sand face to be treated. The packer isolation alleviates any chance of unwanted stimulation in zones of no interest.

Applications

• To remove formation damage in perforation tunnels

• Recover injectivity in injection wells

Features & Benefits

• Uses standard slickline tools and running procedures

• Safe – 100% mechanical, no pyrotechnics or electronics required

• Modular design allowing any length of zone to be treated

• Easily field re-dressable in remote locations

• Sized to pass through standard completion restrictions

• Standard fishing neck design for simple recovery

• High temperature applications up to 350oF

• Cost effective means of improving productivity

SIM FloWellTM

Product Code: 420

SIM FloWellTM

Formation Damage Removal that Kick-Starts Well Productivity

Peak introduces a new addition to its proprietary SIM System range for well remediation and

flow control. SIM FloWellTM is a slickline-set remedial technology capable of removing formation

damage within selected downhole zones and thus improving well productivity.

SIM FloWell is designed to improve well productivity by

being able to remove certain types of formation damage

(e.g. crushed zones in perforation tunnels, tenacious

filter cakes and scales) in both oil and gas wells that are

wireline-perforated. The condition of the near-wellbore

region is critical to the production of hydrocarbons, and

the perforating process is one major contributor to skin

damage. The severe compressive force of perforating can

reduce the permeability of the surrounding rock, which in

turn reduces productivity.

Like the rest of the products within the SIM System range,

SIM FloWell is run, set and retrieved on slickline. Used

in conjunction with Peak’s SIM Plug Systems to provide

selective isolation of the zone to be treated, SIM FloWell

induces a sudden pressure drawdown in a wellbore, and

hence causes a surge of fluid inflow from the reservoir.

SIM FloWell has been designed specifically for

deployment in monobore oil and gas wells that are

wireline-perforated.

All SIM System products are mechanically set, providing

operational flexibility and safety. As a consequence of

being run on slickline, it offers operators a cost effective

and low risk intervention method to clean-up wellbore

damage whilst conducting routine slickline operations.

Formationdamage

Undamagedformation

Undamagedformation

Crushed zone Cleaned upperforation tunnel

Restricted �ow path Maximised �ow path

www.peakwellsystems.comPlease scan

QR code to visit our Vimeo channel.