Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
SILICONE HEATER HOSE
COOLING SYSTEM
PART NO. (25’ 7.6M)
I.D. WORK PRESS (PSI)
26239 3/8’’ (9.5mm) 60
26240 1/2’’ (12.7mm) 60
26241 5/8’’ (15.9mm) 60
26242 3/4’’ (19mm) 50
26244 1’’ (25.4mm) 45
Constructed with silicone rubber. Ideal for extremely high temperature service in radiator, heater and other coolant transfer hose applications.• Reinforced with tough, high temperature resistant aramid textile cords. • Exceptionally flexible. • Highly resistant to weathering, coolant deterioration, ozone and temperature extremes. • Exceeds SAE 20R3 Class A tube and cover.
• Also can be used for emission hose applications. • For proper installation, use Gates PowerGrip SB Clamps or Gates Silicone Hose Clamps.Temperature Rating: –57°C to +204°CNOTE: Silicone’s water permeation rate is 10 to 15 times greater than Green Stripe II hose.CAUTION: Do not use for fuel or oil transfer applications.Packaging: Individually 25ft (7.6m) cartons.